Modular OMF-System Cluster
|
|
|
- Kristopher Sharp
- 5 years ago
- Views:
Transcription
1 Modular OMF-System Cluster 2000 MONDE face The modular OMF-System Cluster consisting of three systems, has been especially designed for the osteosynthesis in cranio maxillofacial surgery and is universally usable. Naso-orbital area Fixation of bone grafts Infra-orbital area Midface External wall of maxillary sinus Le Fort I, II, III Cranial area Mandible Frontal sinus Orthognathic surgery OMF / Oral Maxillo Facial
2 New Name - New Design - Proven Technology MONDE face Modular OMF-System Cluster Proven MONDEAL systems for OMF surgery united under a new name in an innovative modular principle. The many years of successful practicing of MICRO 1200, MINI 1700 and MINI 2000 OMF systems are reason for the further development and optimization of the systems with focus on functionality, modularity and efficiency. Depending on need and use, the components can be assembled individually by the enduser Logical color coding of the different systems Innovative and modular storage system MONDE face Table of contents Overview Page 3 MICRO Screws 1.2 mm Page 4 - Plates Page Titanium MESH Page 6 - Instruments Page 7-9 Mini Screws 1.7 mm Page 10 - Plates Page Titanium MESH Page 14 - Instruments Page Mini Screws 2.0 mm Page 18 - Plates Page Titanium MESH Page 26 - Instruments Page Container info Page 31 2
3 Overview MICRO 1200 The titanium implant system for highest standards in the field of osteosynthesis in the upper third of the skull. Color code: blue 1200 MONDE face 1700 MINI 1700 The titanium implant system with smaller plates and screws as perfect complement to the osteosynthesis in the upper two thirds of the skull. Color code: green 2000 MINI 2000 The titanium implant system specifically designed for the osteosynthesis of the oral and maxillofacial surgery and universally usable. Color code: red Areas of Application Systems Naso-orbital area Infra-orbital area External wall of maxillary sinus Frontal sinus Fixation of bone grafts Cranial area Midface Le Fort I, II, III Mandible Orthognathic surgery 3
4 Self-tapping Screws MICRO 1200 MCD Screw (Packaging: 10/ea.) Art. No. Diameter x Length x 3 mm x 4 mm x 5 mm x 6 mm x 7 mm x 9 mm x 11 mm x 13 mm x 15 mm CROSS-FIT Screw (Packaging: 10/ea.) Art. No. Diameter x Length x 3 mm x 4 mm x 5 mm x 6 mm x 7 mm x 9 mm x 11 mm x 13 mm x 15 mm MCD Emergency Screw (Packaging: 5/ea.) Art. No. Diameter x Length x 4 mm x 6 mm x 11 mm x 13 mm x 15 mm CROSS-FIT Emergency Screw (Packaging: 5/ea.) Art. No. Diameter x Length x 4 mm x 6 mm x 11 mm x 13 mm x 15 mm 4
5 Plates (Packaging: 1/ea.) Thickness: MICRO hole Art. No. Description hole Plate, straight hole Plate, bar 6 mm hole Plate, bar 9 mm hole Plate, straight hole Plate, bar 7.5 mm hole Plate, straight hole Plate, straight hole Orbital Plate hole Orbital Plate hole L-Plate right hole L-Plate left hole L-Plate, bar 7.5 mm, right hole L-Plate, bar 7.5 mm, left Art. No. Description hole L-Plate, bar 12 mm, right hole L-Plate, bar 12 mm, left hole T-Plate hole T-Plate, bar 9 mm hole T-Plate, bar 7.5 mm hole H-Plate, small hole H-Plate, large hole Y-Plate hole Y-Plate, bar 8 mm hole Y-Plate, bar 12 mm hole X-Plate, small hole X-Plate, large 5
6 CAD-Plates (Packaging: 1/ea.) Thickness: MICRO Art. No. Description hole CAD-Plate, triangular hole CAD-Plate, square hole CAD-Plate, square hole CAD-Plate, square hole CAD-Plate, rectangular hole CAD-Plate, rectangular hole CAD-Plate, rectangular Titanium MESH (Packaging: 1/ea.) MICRO-MESH, Thickness: 0.1 mm Art. No. Length x Width x Thickness x 60 x 0.1 mm MICRO-MESH, Thickness: 0.2 mm Art. No. Length x Width x Thickness x 60 x 0.2 mm MESH bending pliers inclusive M-faces MESH cutter M-faces, 2 pieces L-faces, 2 pieces 6
7 Instruments MICRO CROSS-FIT screwdriver with holding device (consisting of and ) 84-KS0-100 MCD screwdriver with holding device (consisting of 84-SL and ) CROSS-FIT holding device, not self-retaining, 3 parts Set consisting of: CROSS-FIT blade, not self-retaining Sleeve Tension sheath 84-SL MCD holding device, not self-retaining, 3 parts Set consisting of: 84-SK MCD blade, not self-retaining Sleeve Tension sheath Screwdriver handle, 9 cm Screwdriver handle, short, 6 cm CROSS-FIT blade, self-retaining 84-SK MCD blade, self-retaining CROSS-FIT, Screwdriver fixed, 13 cm, self-retaining 84-SS MCD, Screwdriver fixed, 13 cm, self-retaining 7
8 Instruments MICRO CROSS-FIT blade, short, 20 mm, DENTAL, self-retaining, for angled handpieces 84-SK MCD blade, short, 20 mm, DENTAL, self-retaining, for angled handpieces Drills Diameter Ø Length WL Art. No. Diameter x Length Working Length (WL) End x 46 mm 5 mm Stryker x 48 mm 8 mm Stryker x 50 mm 15 mm Stryker 84-SP Screws measuring plate 8
9 Instruments MICRO Plate cutter, 11 cm Flat nose pliers, 13.5 cm Aderer modular plate bending pliers, 12.5 cm Plate holding forceps curved, 18 cm Plate holding fork/ball, double-ended, 18 cm Depth measuring gauge 1.2 mm 9
10 Self-tapping Screws MINI 1700 MCD Screw (Packaging: 10/ea.) Art. No. Diameter x Length x 3 mm x 4 mm x 5 mm x 6 mm x 7 mm x 8 mm x 9 mm x 11 mm x 13 mm x 15 mm MCD Emergency Screw (Packaging: 5/ea.) Art. No. Diameter x Length x 5 mm x 7 mm x 9 mm CROSS-FIT Screw (Packaging: 10/ea.) Art. No. Diameter x Length x 3 mm x 4 mm x 5 mm x 6 mm x 7 mm x 8 mm x 9 mm x 11 mm x 13 mm x 15 mm CROSS-FIT Emergency Screw (Packaging: 5/ea.) Art. No. Diameter x Length x 5 mm x 7 mm x 9 mm Self-drilling Screws (Packaging: 5/ea.) Self-drilling screws for the mandible, mid-face and calvarium Indications: Fractures, orthognathic surgery, orbital area Contraindications: The application of S-DRIVE screws may be restricted or even contraindicated in use with compact cortical bones, e.g. mandibular base and lower jaw angulation, as well as split fractures. MCD S-DRIVE Screw Art. No. Diameter x Length x 4 mm x 5 mm CROSS-FIT S-DRIVE Screw Art. No. Diameter x Length x 4 mm x 5 mm 10
11 Plates (Packaging: 1/ea.) Thickness: MINI hole 24-hole Art. No. Description hole Plate, straight hole Plate, bar 6 mm hole Plate, bar 8 mm hole Plate, bar 10 mm hole Plate, straight hole Plate, bar 10 mm hole Plate, straight hole Plate, straight hole Plate, straight hole Orbital Plate hole Orbital Plate hole Orbital Plate Art. No. Description hole T-Plate hole T-Plate, bar 8 mm hole Y-Plate, bar 8 mm hole Y-Plate, short hole Double Y-Plate, small hole Double Y-Plate hole Double Y-Plate, bar 8 mm hole Z-Plate, bar 12 mm, right hole Z-Plate, bar 12 mm, left 11
12 Plates (Packaging: 1/ea.) Thickness: MINI Art. No. Description hole L-Plate, right hole L-Plate, left hole L-Plate,bar 6 mm, right hole L-Plate,bar 6 mm, left hole L-Plate, bar 6 mm, 110, right hole L-Plate, bar 6 mm, 110, left hole L-Plate, bar 8 mm, right hole L-Plate, bar 8 mm, left hole L-Plate, bar 8 mm, 110, right hole L-Plate, bar 8 mm, 110, left Art. No. Description hole L-Plate, bar 10 mm, right hole L-Plate, bar 10 mm, left hole L-Plate, bar 10 mm, 110, right hole L-Plate, bar 10 mm, 110, left hole L-Plate, bar 12 mm, 110, right hole L-Plate, bar 12 mm, 110, left hole L-Plate, bar 16 mm, 110, right hole L-Plate, bar 16 mm, 110, left 12
13 CAD-Plates (Packaging: 1/ea.) Thickness: MINI Art. No. Description hole CAD-Plate, square hole CAD-Plate, square hole CAD-Plate, square Art. No. Description hole CAD-Plate, rectangular hole CAD-Plate, rectangular hole CAD-Plate, rectangular 13
14 Titanium MESH (Packaging: 1/ea.) MINI 1700 MICRO-MESH, Thickness: 0.1 mm Art. No. Length x Width x Thickness x 60 x 0.1 mm MICRO-MESH, Thickness: 0.2 mm Art. No. Length x Width x Thickness x 60 x 0.2 mm Hexagonal MESH, Thickness: Art. No. Length x Width x Thickness x 100 x x 100 x x 200 x Flexible MESH, Thickness: Art. No. Length x Width x Thickness x 100 x MESH bending pliers inclusive M-faces MESH cutter M-faces, 2 pieces L-faces, 2 pieces 14
15 Instruments MINI CROSS-FIT screwdriver with holding device (consisting of and ) 84-KS0-110 MCD screwdriver with holding device (consisting of 84-SL and ) CROSS-FIT holding device, not self-retaining, 3 parts Set consisting of: CROSS-FIT blade, not self-retaining Sleeve Tension sheath 84-SL MCD holding device, not self-retaining, 3 parts Set consisting of: 84-SK MCD blade, not self-retaining Sleeve Tension sheath Screwdriver handle, 10 cm Screwdriver handle, short, 8 cm CROSS-FIT blade, self-retaining 84-SK MCD blade, self-retaining CROSS-FIT, Screwdriver fixed, 14 cm, self-retaining 84-SS MCD, Screwdriver fixed, 14 cm, self-retaining 15
16 Instruments MINI CROSS-FIT blade, short, 20 mm, DENTAL, self-retaining, for angled handpieces 84-SK MCD blade, short, 20 mm, DENTAL, self-retaining, for angled handpieces Drills Diameter Ø Length WL Art. No. Diameter x Length Working Length (WL) End x 46 mm 5 mm Stryker x 48 mm 8 mm Stryker x 50 mm 15 mm Stryker 84-SP Screws measuring plate 16
17 Instruments MINI Plate cutter, 11 cm Flat nose pliers, 13.5 cm Aderer modular plate bending pliers, 12.5 cm Plate holding forceps curved, 18 cm Plate holding fork/ball, double-ended, 18 cm Depth measuring gauge mm 17
18 Self-tapping Screws (Packaging: 10/ea.) MINI 2000 MCD Screw (Packaging: 10/ea.) Art. No. Diam. x Length x 4 mm x 5 mm x 7 mm x 9 mm x 11 mm x 13 mm x 15 mm x 17 mm x 19 mm CROSS-FIT Screw (Packaging: 10/ea.) Art. No. Diam. x Length x 4 mm x 5 mm x 7 mm x 9 mm x 11 mm x 13 mm x 15 mm x 17 mm x 19 mm STANDARD Screw (Packaging: 10/ea.) Art. No. Diam. x Length x 4 mm x 5 mm x 7 mm x 9 mm x 11 mm x 13 mm x 15 mm x 17 mm x 19 mm MCD Emergency Screw (Packaging: 5/ea.) Art. No. Diam. x Length x 5 mm x 7 mm x 9 mm CROSS-FIT Emergency Screw (Packaging: 5/ea.) Art. No. Diam. x Length x 5 mm x 7 mm x 9 mm STANDARD Emergency Screw (Packaging: 5/ea.) Art. No. Diam. x Length x 5 mm x 7 mm x 9 mm Self-drilling Screws (Packaging: 5/ea.) Self-drilling screws for the mandible, mid-face and calvarium Indications: Fractures, orthognathic surgery, orbital area Contraindications: The application of S-DRIVE screws may be restricted or even contraindicated in use with compact cortical bones, e.g. mandibular base and lower jaw angulation, as well as split fractures. MCD S-DRIVE Screw Art. No. Diameter x Length x 5 mm x 7 mm CROSS-FIT S-DRIVE Screw Art. No. Diameter x Length x 5 mm x 7 mm 18
19 Plates (Packaging: 5/ea. * Packaging: 1/ea.) Thickness: and MINI * * * * * 16-hole Art. No. Thickness Description hole Plate straight, 1/ea. 4-hole Plate straight 6-hole Orbital Plate, 1/ea hole Orbital Plate, 1/ea hole Plate, bar 9 mm, straight 4-hole Plate, bar 12 mm, straight Art. No. Thickness Description hole Plate, bar 17 mm, straight hole Plate, straight hole Plate, straight 6-hole Plate, bar 12 mm, straight 8-hole Plate, straight 16-hole Plate, straight 19
20 Plates (Packaging: 5/ea.) Thickness: and MINI Art. No. Thickness Description hole L-Plate, right 4-hole L-Plate, left 4-hole L-Plate 110, right 4-hole L-Plate 110, left 4-hole L-Plate, bar 9 mm, right 4-hole L-Plate, bar 9 mm, left 4-hole L-Plate, bar 9 mm, 110, right 4-hole L-Plate, bar 9 mm, 110, left Art. No. Thickness Description hole L-Plate, bar 12 mm, right 4-hole L-Plate, bar 12 mm, left 4-hole L-Plate, bar 12 mm, 110, right 4-hole L-Plate, bar 12 mm, 110, left 4-hole L-Plate, bar 15 mm, right 4-hole L-Plate, bar 15 mm, left hole L-Plate, bar 12 mm, right hole L-Plate, bar 12 mm, left 20
21 Plates (Packaging: 5/ea. * Packaging: 1/ea.) Thickness: and MINI * Art. No. Thickness Description hole T-Plate hole T-Plate 90 6-hole Double T-Plate hole Double T-Plate, bar 19 mm hole Double T-Plate, bar 13 mm 5-hole Y-Plate hole Y-Plate, bar 9 mm hole Y-Plate, bar 12 mm hole Double Y-Plate 6-hole Double Y-Plate, bar 12 mm 7-hole Double Y-Plate hole H-PLate, 1/ea. 21
22 CAD-Plates (Packaging: 1/ea.) Thickness: MINI Art. No. Description hole CAD-Plate square hole CAD-Plate square hole CAD-Plate square hole CAD-Plate rectangular hole CAD-Plate rectangular hole CAD-Plate rectangular, strengthened hole CAD-Plate rectangular, strengthened 22
23 BLUE SERIES Plates (Packaging: 5/ea. * Packaging: 1/ea.) Thickness: 0.8 mm MINI hole * Art. No. Description hole Plate, straight hole Plate, bar 9 mm, straight hole Plate, bar 12 mm, straight hole Plate, straight hole Plate, straight, 1/ea hole L-Plate, right hole L-Plate, left Art. No. Description hole L-Plate, bar 9 mm, 110, right hole L-Plate, bar 9 mm 110, left hole L-Plate, bar 12 mm 110, right hole L-Plate, bar 12 mm 110, left JALLUT Gliding Hole Miniplates (Packaging: 1/ea.) Thickness: Art. No. Description Jallut Plate Gliding Hole, bar 8 mm Jallut Plate Gliding Hole, bar 10 mm Jallut Plate Gliding Hole, bar 12 mm 23
24 PAULUS Le Fort I Plates (Packaging: 1/ea.) Thickness: 0.8 mm MINI 2000 Le Fort I Plate, 110, right Le Fort I Plate, 110, left Art. No. Description without bar, flat Bar 3 mm Bar 4 mm Bar 5 mm Bar 6 mm Bar 7 mm Bar 8 mm Art. No. Description without bar, flat Bar 3 mm Bar 4 mm Bar 5 mm Bar 6 mm Bar 7 mm Bar 8 mm Chinplates (Packaging: 1/ea.) STANDARD Chinplate Thickness: Art. No. Description Bar 4 mm Bar 6 mm Bar 8 mm Bar 10 mm Bar 12 mm BULL Chinplate Thickness: Art. No. Description Bar 4 mm Bar 6 mm Bar 8 mm Bar 10 mm Bar 12 mm 24
25 Plates Mandibular (Packaging: 1/ea.) Thickness: 1.5 mm MINI MR MR MR MS MR MS MINI 2000 Mandibular 10-Loch Platte, 60 mm MINI 2000 Mandibular 20-Loch Platte, 120 mm MINI 2000 Mandibular 30-Loch Platte, 180 mm MINI 2000 Mandibular 41-Loch Platte, 240 mm Art. Nr. Beschreibung 34-MR CAD MINI 2000 Mandibular 4-hole Plate 34-MR CAD MINI 2000 Mandibular 6-hole Plate 34-MR CAD MINI 2000 Mandibular 8-hole Plate 34-MS CAD MINI 2000 Mandibular 8-hole Plate, curved 34-MR CAD MINI 2000 Mandibular 12-hole Plate 34-MS CAD MINI 2000 Mandibular 12-hole Plate, curved MINI 2000 Mandibular 10-hole Plate, 60 mm MINI 2000 Mandibular 20-hole Plate, 120 mm MINI 2000 Mandibular 30-hole Plate, 180 mm MINI 2000 Mandibular 41-hole Plate, 240 mm 25
26 Titanium MESH (Packaging: 1/ea.) MINI 2000 Hexagonal MESH, Thickness: Art. No. Length x Width x Thickness x 100 x MESH bending pliers inclusive M-faces MESH cutter M-faces, 2 pieces L-faces, 2 pieces 26
27 Instruments MINI CROSS-FIT screwdriver with holding device (consisting of and ) 84-KS0-120 MCD screwdriver with holding device (consisting of 84-SL and ) STANDARD screwdriver with holding device (consisting of and ) CROSS-FIT holding device, 3 parts Set consisting of: CROSS-FIT blade, not self-retaining Tension sheath Sleeve 84-SL MCD holding device, 3 parts Set consisting of: 84-SK MCD blade, not self-retaining Tension sheath Sleeve STANDARD holding device, 3 parts Set consisting of: Standard blade, not self-retaining Tension sheath Sleeve Screwdriver handle, 9.5 cm CROSS-FIT blade, self-retaining MCD blade, self-retaining CROSS-FIT Screwdriver fixed, 18 cm, self-retaining 84-SS MCD Screwdriver fixed, 18 cm, self-retaining STANDARD Screwdriver fixed, 18 cm, not self-retaining 27
28 Instruments MINI CROSS-FIT blade, short, 20 mm, DENTAL, self-retaining, for angled handpieces 84-SK MCD blade, short, 20 mm, DENTAL, self-retaining, for angled handpieces STANDARD blade, short, 20 mm, DENTAL, not self-retaining, for angled handpieces Drills Diameter Ø Length WL Art. No. Diameter x Length Working Length (WL) End x 46 mm 5 mm Stryker x 48 mm 7 mm Stryker x 50 mm 9 mm Stryker x 50 mm 22 mm Stryker x 105 mm 22 mm Stryker For angled handpieces: Art. No. Diameter x Length Working Length (WL) End x 18 mm 5 mm Dental x 23 mm 10 mm Dental x 28 mm 15 mm Dental 84-SP Screws measuring plate 28
29 Instruments MINI Plate cutter, 18.5 cm, with TC-inserts Flat nose pliers, 13.5 cm Aderer modular plate bending pliers, 12.5 cm Plate holding forceps curved, 18 cm Plate holding fork/ball, double-ended, 18 cm Depth measuring gauge mm 29
30 Instruments MINI Transbuccal trocar and drill guide, small diameter - for self-retaining screws (consisting of , , , ) Transbuccal trocar and drill guide, large diameter - for screwdriver with holding device (consisting of , , , ) Handle Handle Cheek retractor Cheek retractor Trocar Trocar Drill guide Drill guide 30
31 Container Container brochure Art.no. 97-D119-E Modular Container System MONDE face The MONDE face modular design principle provides the user a variety of configuration options for an individual combination of screws, plates and instruments. This advantage is also reflected in the modular container system. The container components are arranged and combined depending on the user s preferences and the selection of the individual elements. 31
32 High Quality Implants Made by MONDEAL We reserve the right to make catalog and design changes arising from further developments and modifications. Pictures, product descriptions and texts are the property of MONDEAL Medical Systems GmbH. Further use and reproduction by Third Parties requires written consent from MONDEAL Medical Systems GmbH. All rights reserved! Note: Responsibility for the selection of the patient, for adequate training as well as the decision as to the choice and use of the implants, a post-operative removal or retention of implants is the sole decision of the surgeon. All brands and logos referred to in this brochure, registered by Third Parties, are subject without restriction to the legal provisions currently in force and to the rights of ownership of the respective registered owner MONDEAL Medical Systems GmbH Am Gewerbering Mühlheim a. d. Donau/Germany Phone Fax mail@mondeal.de 97-D116-E MONDE-face 01/ 09-13
CinchLock SS (Sports Sheath) Knotless Labrum Restoration SURGICAL TECHNIQUE
CinchLock SS (Sports Sheath) Knotless Labrum Restoration CinchLock SS Knotless Anatomic Labrum Restoration System is designed to facilitate precise anchor placement in challenging environments during hip
Contents INTRODUCTIONS, RETIPPING, RESHARPENING INFORMATION/PRICES DIAGNOSTIC INSTRUMENTS, DRESSING PLIERS, MIRRORS & MIRROR HANDLES
3 3 Contents SECTION ONE: PAGES 1-10 INTRODUCTIONS, RETIPPING, RESHARPENING INFORMATION/PRICES SECTION TWO: PAGES 11-18 DIAGNOSTIC INSTRUMENTS, DRESSING PLIERS, MIRRORS & MIRROR HANDLES SECTION THREE:
tad PRODUCTCATALOG DUAL-TOP TEMPORARY ANCHORAGE DEVICES (TADS) Dual-Top TAD System Kit Dual-Top Temporary Anchor Devices (TADs) Button Top TAD
DUAL-TOP TEMPORARY ANCHORAGE DEVICES (S) Dual-Top System Kit The Dual-Top system includes a well-organized storage block, which allows for repeated sterilization The Dual-Top system includes 14 of the
Important Safety Information for Users of. Bashlin Climbers
Important Safety Information for Users of Bashlin Climbers - WA R NING For your personal safety, this booklet must be completely read and all of the information understood completely before using these
THIS PAGE INTENTIONALLY BLANK
THIS PAGE INTENTIONALLY BLANK Page 1 STEREOTACTIC MINIFRAME AND ACCESSORIES INSTRUCTIONS FOR USE CAUTION Federal (U.S.A.) law restricts this device to sale by or on the order of a physician. Carefully
Zoll-Dental Instrument Catalog
BIE TECH DENTAL SELLS ZOLL INSTRUMENTS Zoll-Dental Instrument Catalog Zoll-Dental: Innovations In Instruments Zoll-Dental is the factory-direct source for quality crafted dental hand instruments. Zoll-Dental
Technical Manual. Stand 05/2011
MULTI-MONTI Technical Manual Stan5/2011 Technical Manual HECO-MULTI-MONTI Contents Instructions for fixing P. 3 Chapter 1 : Admissible loads in as well as P. 4 anchor-characteristics for MMS-6 to MMS-16
IMPLANTS & INSTRUMENTS FOR TISSUE REPAIR
IMPLANTS & INSTRUMENTS FOR TISSUE REPAIR Surgical Innovation Customer Driven For 10 years, Parcus Medical has been listening and reacting to the demands of the changing health care environment. Our mission
Rotator Cuff Solution. Combined Strengths. Precise Control. TWINFIX Ultra FOOTPRINT Ultra Suture Anchors
Rotator Cuff Solution R Combined Strengths. Precise Control. TWINFIX Ultra FOOTPRINT Ultra Suture Anchors Trusted materials Absorbable Our absorbable HA suture anchor combines poly-l-lactic acid (PLLA)
FRA Spacer Instruments. For anterior lumbar interbody fusion (ALIF) using straight anterior or anterolateral approach.
FRA Spacer Instruments. For anterior lumbar interbody fusion (ALIF) using straight anterior or anterolateral approach. Technique Guide Instruments and implants approved by the AO Foundation Table of Contents
EXTERNALLY ROUTED DROPPER POST owner S MANUAL
EXTERNALLY ROUTED DROPPER POST owner S MANUAL Introduction: This adjustable height seat post with internal cable routing allows for micro-adjustments using a remote handlebar mounted lever. The cable actuated
ENJOYMENT WITHOUT LIMITS The track can be straight or with parabolic curves depending on the ground surface upon which it is laid. In all seasons, in
ENJOYMENT WITHOUT LIMITS The track can be straight or with parabolic curves depending on the ground surface upon which it is laid. In all seasons, in the mountains, on the beach, or in the city Neveplast
HeadActive TECHNICAL DATA AND INSTRUCTIONS OF USE. Manufactured by: Onlywise Unipessoal Lda. Calle Santa Caterina nº 124 Porto (Portugal) PT
HeadActive TECHNICAL DATA AND INSTRUCTIONS OF USE Manufactured by: Onlywise Unipessoal Lda. Calle Santa Caterina nº 124 Porto (Portugal) PT510797725 HeadActive HeadActive is a product designed to improve
Aesculap CCR System Titanium
Aesculap CCR System Titanium Caspar Cervical Retractor System Aesculap Spine CCR System Complete Blade Range 19 mm system for microsurgical techniques (green color coded) 24 mm system for standard techniques
PoolLock Easy Pool Cover
PoolLock Easy Pool Cover INSTALLATION MANUAL The packaging of the PoolLock Easy Cover contains: 1. PoolLock Easy cover (rolled up) 2. One or two manual cranks (according to the pool size) Plastic bag contains:
Special Note: Single Pawl Spacer is required when using a Ratchet Pawl Assembly.
Line Overview The automatic spring-fed knives feature of this tool prevents excessive strain from being applied from the rig floor that could cause the knives to burn or break before the cut is completed.
skin expanders Recreating harmonious bodies for a new vision of rebirth.
skin expanders Recreating harmonious bodies for a new vision of rebirth. For almost 30 years, Laboratoires Sebbin has designed and manufactured innovating solutions in the field of aesthetic and reconstructive
BIORAPTOR Knotless Suture Anchor Arthroscopic Shoulder Instability Repair. Shoulder Series Technique Guide by: Thomas Youm, MD
BIORAPTOR Knotless Suture Anchor Arthroscopic Shoulder Instability Repair Shoulder Series Technique Guide by: Thomas Youm, MD As described by: Thomas Youm, MD Clinical Assistant Professor NYU Hospital
INSTRUCTIONS FOR CHAIN LINK INSTALLATION
INSTRUCTIONS FOR CHAIN LINK INSTALLATION This guide explains how to correctly install our chain link fencing and post system. The guide provides details of which post type you will need for your fence
TOLL FREE: SIZING ( )
Headquarters 915 Oberlin Rd. SW P.O. Box 810 Massillon, OH 44648 Tel: 330-837-4203 Southern Facility 7560 Industrial Highway P.O. Box 10157 Macon, GA 31297 Tel: 478-781-8725 WWW.MIDWESTERNIND.COM TOLL
Melon-Shaped Egg Basket
Melon-Shaped Egg Basket GH PRODUCTIONS, INC. The Basket Maker's Catalog Materials are available from your basketry supply store, or contact: GH Productions, Inc. The Basket Maker's Catalog 521 E. Walnut
BHN SURGICALS Pvt.Ltd
BHN SURGICALS Pvt.Ltd Manufacturing - Technology - Marketing TITANIUM INSTRUMENTS Micro Tissue Forceps TITANIUM Ring Smooth A B Fig A BRF 01.50 A BRF 01.80 A BRF 02.10 B BRF 01.51 B BRF 01.81 B BRF 02.11
Every challenge has a solution DePuy Spine, Inc. 325 Paramount Drive Raynham, MA USA Tel: +1 (800) SEAMLESS JUNCTIONAL CONNECTIONS
11:59 PM Page 1 I N D I C A T I O N S When intended to promote fusion of the cervical spine and occipito-cervico-thoracic junction (occiput - T3), the SUMMIT Occipito-Cervical-Thoracic (OCT) Spinal System
Installing ASI Umbilical Delivery Systems
Rev A 05 Nov 2015 Page 1 of 10 PURPOSE This guide provides an overview of tubing connections into an ASI wall-mounted Junction Box that has already been plumbed with a compressed air connection including
Re-Tipping and Instrument Sharpening Information!
4 4 Re-Tipping and Instrument Sharpening Information! Section One of Zoll-Dental s Catalog will detail the Complete Instrument Service Center. Included in this section are a full service price list and
MULTI-MONTI Technical manual
MUTI-MONTI Technical manual Version 01/2017 Technical manual MUTI-MONTI Content Instructions for fixing P. 3 Chapter 1: Admissible loads in as well as P. 4 anchor characteristics for MMS-6 to MMS-16 1.1
INSTRUCTIONS & MAINTENANCE SHEET PORTABLE HYDRAULIC PUNCHING HEAD PH045
INSTRUCTIONS & MAINTENANCE SHEET PORTABLE HYDRAULIC PUNCHING HEAD PH045 V05.2013 DECLARATION OF CONFORMITY 2 1. TECHNICAL CHARACTERISTICS Maximum punching capacity: Min / Max. hole diameter: Max. yield
SERIES 2 RAMP OWNER S MANUAL TOOLS REQUIRED: BEFORE YOU BEGIN... Read and understand these instructions before beginning a ramp setup.
SERIES 2 RAMP OWNER S MANUAL BEFORE YOU BEGIN... Read and understand these instructions before beginning a ramp setup. Use caution and care for your back when lifting, pushing, pulling, folding or unfolding
PCB accessories. PCB handle C. PCB retainer C. Order Information. Note. Order Information
PCB accessories PCB handle C PCB accessoriesmain CataloguePart number in bold face type: ready for despatch within 2 working dayspart number in normal type: ready for despatch within 0 working days For
Cable entries. Contents. Cable entries. Cable entries Introduction L.2 L.1. Standard cable glands - Plastic L.5. Standard cable glands - Brass L.
Contents Introduction.2 Standard cable glands - Plastic.5 Standard cable glands - Brass.7 EMC cable glands.14 Standard cable glands - Stainless steel.16 Cable glands for Ex applications - Brass.17 Adaptors.18
Operating instruction for the quick-change tap holders type:
type: HF 20 HF 30 Date of edition: 15.07.2008 Stage of alteration: 4 Please keep this for future use! Contents: 1 Application range, safety instructions and technical data... 3 1.1 Application range,
Push-in fittings NPQH
Key features Application Effortless selection of the right fitting. Quick Star offers a secure solution for every connection. The convenient push-in fitting system includes well over 1000 types of standard
Compact Triple Cabinet Outlet Station Model B Installation and Operating Instructions
PORTER Parker Hannifin Corporation Porter Instrument Division 245 Township Line Rd. P.O. Box 907 Hatfield, PA 19440-0907 USA (215) 723-4000 / fax (215) 723-5106 Compact Triple Cabinet Outlet Station Model
Compact Triple Cabinet Outlet Station Model Installation and Operating Instructions
Compact Triple Cabinet Outlet Station Model 6258-1 Installation and Operating Instructions The Porter Compact Triple Outlet Station (6258-1) provides a quick, safe, and reliable method of connection to
TECHNICAL HANDBOOK nvent CADDY Speed Link Manual. SLS Locking Device
TECHNICAL HANDBOOK nvent CADDY Speed Link Manual SLS Locking Device Contents 1. WIRE ROPE SUPPORT OVERVIEW 3 A. Using Wire Rope 3 B. The nvent CADDY Speed Link Manual 3 C. SLS Features 4 D. SLS Mechanism
Product Information. Gripper for small components MPG-plus 16
Product Information MPG-plus 16 MPG-plus More powerful. Faster. Longer fingers. MPG-plus gripper for small components 2-finger parallel gripper with smooth roller guides of the base jaws Field of application
QRPGuys Single Lever Mini Paddle
QRPGuys Single Lever Mini Paddle First, familiarize yourself with the parts and check for all the components. If a part is missing, please contact us and we will send one. You must use qrpguys.parts@gmail.com
Introduction. Terms of reference. Technical Leaflet T5: The Net Gauge BoD Approval: 2014
Introduction At present, net gauges are not applicable equipment for approval by ITTF. Nevertheless net gauges have a very important role to keep the matches fair such that: (i) the result of a rally should
ORG. Application example. Special Grippers O-ring Assembly Gripper. Weight 1.35 kg. Ring diameter O.D. Assembly appr.ø 5 mm.. ø 160 mm.
Sizes 85 Weight 1.35 kg Ring diameter O.D. Assembly appr.ø 5 mm.. ø 160 mm Ring diameter I.D. Assembly appr. ø 10 mm.. ø 120 mm Application example Automatic machine for the internal or external assembly
STAINLESS STEEL BAFFLES VITON O-RING CHARACTERISTICS
BAFFLES RAPID PLUG AND UNPLUG SYSTEM (PATENTED SYSTEM) : RL-..F T +0,5 0 45 L L1 B -0,1-0,2 Ø A +0,1 0 S Ø A -0,1-0,2 STAINLESS STEEL BAFFLES VITON O-RING ØA B T S L1 L RL-6F 6 6 0,7 1 7,5 100 200 300
Gripping rotary modules
Gripping rotary modules Gripping rotary modules GRIPPING ROTARY MODULES Series Size Page Gripping rotary modules RP 314 RP 1212 318 RP 1216 322 RP 1520 326 RP 2120 330 RP 2128 334 RC 338 RC 1212 342 RC
Aesculap ProSpace Titanium / PEEK
Aesculap ProSpace Titanium / PEEK Posterior Lumbar Interbody Fusion System Aesculap Spine ProSpace Implant Design Content A Philosophy 3 B Implant Material 4 C Implant Features 6 D Surgical Technique D1
Installing a Springer Precision Basepad
Installing a Springer Precision Basepad Safety First! Although these parts can be changed by almost any gun owner, we strongly recommend that you use a qualified gunsmith/armorer if any part of this instruction
The Peritrochanteric Space The Next Frontier in Hip Repair
The Peritrochanteric Space The Next Frontier in Hip Repair The Peritrochanteric Space Explore the next frontier with technology-leading solutions Advance your techniques in arthroscopic hip repair with
Kinetics Fluid Systems - Process Flow Products. 18 February
18 February 2002 1 THE MODULAR SYSTEM - History 1995 -Unit Instruments, Inc. introduced Z-Z Block Modular system for Semiconductor marketplace 1997 - Increasing acceptance of modular technology in semiconductor
Read Instructions carefully before use. Rollator is designed for indoor & outdoor use. Do NOT use as a wheelchair or as a transport chair.
Charcoal Red Seat Height 500-10191 500-10195 19 500-10211 500-10215 21 500-10241 500-10245 24 User Manual Read Instructions carefully before use. Rollator is designed for indoor & outdoor use. Do NOT use
Installation Guide Wall Mounted Angled Flagpole
Installation Guide 1.5m - 4m Angled Flagpole Dimensions Flagpole Dimensions Wall Bracket Dimensions 2m Aluminium 76mm Glassfibre 114.3mm angle from vertical 2000mm 250mm 300mm 1715mm Backplate thickness
Declaration of Performance Number 1109-CPD-0079 According to Regulation EU No 305/2011
Item code: HXE01, HXE85, HXE02, HXE12, HXE03 Manufacturer: Tecfi S.p.A. - S.S. Appia, km 193-81050 Pastorano (CE), Italy Table 1 - Intended use Generic type: Metal anchor for use in concrete, concrete
built build to TRENCHLINING DOWN A CAISSON
uilt build to TRENCHLINING DOWN A CAISSON TRENCHLINING Trenchlining_DOWN A CAISSON DOWN A CAISSON CHARACTERISTICS Base panel 315x230 (815 kg) and 415x230 (1018 kg). Super-elevation panel 315x120 (511
Draft Indian Standard SAFES Part 2 Tests for Burglary Resistance (Fifth Revision)
Draft For Comments Only Draft Indian Standard SAFES Part 2 Tests for Burglary Resistance (Fifth Revision) Not to be reproduced without the permission of Last date for receipt of BIS or used as a STANDARD
MPG-plus. Application example. Pneumatic 2-Finger Parallel Gripper Gripper for small components. Gripping force 38 N 175 N. Sizes
MPG-plus Sizes 25 40 Weight 0.06 kg 0.24 kg Gripping force 38 N 175 N Stroke per finger 3 mm 6 mm Workpiece weight 0.19 kg 0.7 kg Application example Pneumatically driven, dual-axis pick-and-place machine
HELM Hinging facility according to EN 795:2012 Typ D. Sliding hardware
HELM Hinging facility according to EN 795:2012 Typ D Sliding hardware Contents General Information General Information Page 3 Certification Page 4 Technical Information HELM Track profile Page 7 HELM Bends
COMPACT TRIPLE WALL OUTLET STATION MODEL INSTALLATION AND OPERATING INSTRUCTIONS
COMPACT TRIPLE WALL OUTLET STATION MODEL 6255-1 INSTALLATION AND OPERATING INSTRUCTIONS To assure safe operation and conformation to local fire codes, all Porter Outlet Stations are designed to be used
DP Spare parts list. Demolition pulverizer. DP 2800 s/n DEQ Construction Tools GmbH No
DP 2800 Spare parts list Demolition pulverizer DP 2800 s/n DEQ139266-2018 Construction Tools GmbH No. 3390719501 2018-01-01 General information This spare parts list applies to the following: Part number
Extension Platform. Base Platform. Crossover. Exit railing. Exit Railing
Base Platform Galvanized With metal grate and two brackets Railing on the long side and a face side Extension Platform Galvanized With metal grate and one bracket Railing on the long side with rail connection
Cutting device S-16. Operating Instructions Habasit AG Postfach, CH-4153 Reinach-Basel Phone Fax
Habasit AG Postfach, CH-4153 Reinach-Basel Phone ++41 61 715 15 15 Fax ++41 61 715 15 55 Operating Instructions 3890 Author: Nyk Page 1 of 8 Replaces: - The cutting device is a manual cutting tool to cut
Terranova. Play equipment for life
Terranova Play equipment for life Fire, Earth, Air, Water. Terranova is the result of a systematic further development of Berliner Seilfabrik s play concept Terranos that was introduced more than 15 years
Furlex 104S-404S (Standard)
104S-404S (Standard) The 4th generation of an icon The fourth generation of is an uncompromising evolution of the world s best selling jib furling and reefing system. Proven design blended with innovation
Under Basin Storage Unit
Under Basin Storage Unit Assembly Instructions- please keep for future reference ML235 Dimensions Width - 48cm Depth - 30cm Height - 60cm Important Please read these instructions fully before starting
GRYPHON BR Suture Anchor
GRYPHON BR Suture Anchor Key Features & Benefits GRYPHON T GRYPHON P GRYPHON BR is the newest and smallest shoulder instability anchor in the DePuy Mitek portfolio. This suture anchor, despite being small
SPOKES & NIPPLES FOR BICYCLE 2017
SPOKES & NIPPLES FOR BICYCLE 2017 HISTORY AND PRESENT Based in Lomagna, in the heart of Lombardy, Alpina Raggi S.p.A. was founded in 1926 and focusses its activity on the production of spokes and nipples.
SPG. Application example. Pneumatic 2-Finger Parallel Gripper Heavy-load Gripper. Weight 35 kg. Stroke per finger 100 mm.
SPG Size 100 Weight 35 kg 10,000 N Stroke per finger 100 mm Workpiece weight 50 kg Application example Gripper unit for heavy V8 engine blocks. SPG 100 2-Finger Heavy-load Gripper 446 www.schunk.com SPG
ASICO Innovative I/A Tip System (Patented) Maximize your I/A efficiency for Today s MICS and FLACS procedure
Call us today for special pricing on all I/A tip models Surgical Notes ASICO Innovative I/A Tip System (Patented) Jan 2019 Maximize your I/A efficiency for Today s MICS and FLACS procedure 0.3mm port Call
The cost-efficient fixing for flexible use in non-cracked concrete VERSIONS. zinc-plated steel stainless steel hot-dip galvanised steel
The cost-efficient fixing for flexible use in non-cracked concrete VERSIONS APPROVALS zinc-plated steel stainless steel hot-dip galvanised steel BUILDING MATERIALS Approved for: Concrete C20/25 to C50/60,
FLEXIBLE AND RELIABLE ANCHORING
Spiral rope anchor and FLEX Head FLEXIBLE AND RELIABLE ANCHORING 1 THE SMARTER ANCHOR FLEXES. The flexibility of the whole system is crucial for both rockfall barriers and other protection systems. Why?
Push-in fittings NPQH
Key features Application Effortless selection of the right fitting. Festo offers a secure solution for every connection. The convenient push-in fitting system includes well over 1000 types of standard
Allspeeds Ltd. Royal Works, Atlas St Clayton le Moors Accrington Lancashire England BB5 5LW. Tel +44 (0)
Allspeeds Ltd. Royal Works, Atlas St Clayton le Moors Accrington Lancashire England BB5 5LW Tel +44 (0)1254 615100 www.allspeeds.co.uk SOFT LINE CUTTER SL55 PRODUCT CODE No. 980504 INSTRUCTIONS FOR INSTALLATION,
Student Exploration: Human Evolution - Skull Analysis
Name: Date: Student Exploration: Human Evolution - Skull Analysis Prior Knowledge Questions 1. Label one of the skulls below as human and the other as a chimpanzee skull. 2. What features did you use to
High Feed Milling Cutter Family Offers Increased Productivity!!
Cutter Series: 1TG1F TG1F Insert Series: UNLU0603MOTR UNLU0603MOTR-MM UNLU0603MOTR-ML Insert Grades: IN2035 IN2504 IN2505 IN2510 IN2530 IN7035 Applications: Die & Mold Aerospace General Purpose High Feed
Components for air preparation and pressure adjustment. OUT port position ( ) connected Rear side. of IN port. Air tank. directly.
Components preparation and pressure adjustment ABP Overview ABP is a component that enables boosting by s only up to twice primary pressure (.0MPa max.) in combination with using air tank but not using
List of Contents vma. Compressed Air Conditioning 2. System description 2. Individual Units Pre-Filters 3. Combinations 6
Úprava stlačeného vzduchu EWO VMA List of Contents System description Individual Units Pre-Filters 3 Micro-Filters 4 Activated-Charcoal-Filters 5 Combinations 6 Accessories and Main spare parts 6 Service
Final Assembly Instructions Bikes with Quill Stems
Final Assembly Instructions Bikes with Quill Stems Thank you for buying your new bicycle from L.L.Bean. Read these instructions carefully before beginning the final assembly. Prior to shipping, our expert
BIMBAR INFLATABLE PACKERS AND ACCESSORIES
BIMBAR INFLATABLE PACKERS AND ACCESSORIES Geopro supplies a complete range of inflatable packers in nine different diameters from 28 up to 170mm. All our packers made of BIMBAR rubber technology are reinforced
HelixAR. Electrosurgical Generator with Argon Beam Coagulation
HelixAR Electrosurgical Generator with Argon Beam Coagulation From customizable argon modes for improved clinical performance to an intuitive, easy-to-use design, CONMED s NEW HelixAR Electrosurgical Generator
No guesswork. Controllable tension for labral repairs of the shoulder and hip. BIORAPTOR Knotless Suture Anchor
No guesswork Controllable tension for labral repairs of the shoulder and hip BIORAPTOR Knotless Suture Anchor The BIORAPTOR Knotless Suture Anchor allows surgeons to control anchor tension in labrum repairs
Read through all the steps first before working on the camera. Make sure you know what to do.
Step-by-step procedure to fix lack of contact in the end-of-travel switch of a D700 pop-up flash DISCLAIMER: PLEASE UNDERSTAND THAT IF YOU DECIDE TO FOLLOW THE INFORMATION PROVIDED BELOW YOU DO SO AT YOUR
Anchor Component Material Standard Mechanical Properties
SECTION 4.1 PAGE 1 / 5 l description The UCAN sleeve anchor is a light-medium duty anchor ideal for applications in concrete, hollow block and brick. It is a mechanical expansion anchor assembled with
high tech ski & snowboard tuning tools
research design made with HIGH TECH Born in 1975, the SKI MAN trade-mark has become internationally known thanks to his high-tech and high-quality products for ski and snowboard hand tuning. Our relationship
CALMO
---------------------------------------------------- Sound attenuator with recessed connection for rectangular ducts ---------------------------------------------------------------------- GENERAL is, due
12 Impeller Replacement
144 Impeller Replacement INTRODUCTION Jabsco The Original Impeller Jabsco Flexible Impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general
Ramp Hand-railing System. Complies with Building Regulations. Lockinex. ea i, ea u i
Ramp Hand-railing System Complies with Building Regulations Lockinex ea i, ea u i INTRODUCTION COMPOSITION, MANUFACTURE Handrails to ramps must comply to current building regulations. The Lockinex system
Supratec Gesellschaft für Umweltund Verfahrenstechnik mbh OXYFLEX - M T / M T M E M B R A N E D I S C D I F F U S ER AERATION TECHNOLOGY
OXYFLEX - M T 2 3 5 / M T 3 0 0 M E M B R A N E D I S C D I F F U S ER UND GESELLSCHAFT FÜR UMWELT- VERFAHRENSTECHNIK MBH AERATION TECHNOLOGY von-drais-straße 7 D-55469 Simmern / Hunsrück Tel.: +49 6761
REVEAL IN DIE-CUT REMOVE FOR PRINTING
M A X I M U M A C C E S S S U R G I C A L P L A T F O R M REVEAL IN DIE-CUT REMOVE FOR PRINTING M A X I M U M A C C E S S S U R G I C A L P L A T F O R M Minimal access systems using tubular retractors
Skylight Rollers For Velux windows
For Velux windows Velux windows are identified by the Velux branded data plate on the sash of the window. No measuring required. page 13 features Steel barrel Extremely reliable, lightweight and strong.
UKB-System W. Type Weinbrenner
UKB-Sstem W Tpe Weinbrenner.. Explanation punches/top-tools and dies. 134 1 Punches/top-tools Punches/top-tools. 136 Holder for blade with changeable 30 blade. 137 88 Screw-on punch/top-tool. 137 Holder
TECHNICAL INFORMATION
TECHNICAL INFORMATION Models No. TD0101, TD0101F Description Impact Driver L PRODUCT P 1/ 14 CONCEPT AND MAIN APPLICATIONS Models TD0101 and TD0101F are cost-competitive 100N.m-class impact driver developed
surgical instruments catalog German Engineering. American Design. World-Class Quality.
surgical instruments catalog German Engineering. American Design. World-Class Quality. CHAPTER OVERVIEW Pilling Ophthalmic Instruments represent a high-quality line that offers the precision you require,
steel wire cable tray system accessories
accessories Marco Cable Management has further enhanced its reputation, by the continued growth in innovative products and supportive accessories. Marco has also invested heavily in new state of the art
PSI Compakt - Special Seals
Pipeline Accessories PSI Compakt - Special Seals Compakt - special versions also with KTW/W270 for potable water General Information Selection Guide Order Submittal Sheet Installation Instruction 1 PSI
TOPSLOT End Mill and Modular Type Expansion
1/10 TOPSOT End Mill and Modular Type Expansion 2/10 TOPSOT End Mill and Modular Type Expansion FEATURES Insert features ➊ Robust insert design for tangential slotting by 4 corner cutting edges (2 right/
V-PLOW. ACCUFLO Conveyor Belt Cleaning System MAX SYSTEMS GUIDE. Engineering. LIB-CP-SYS-01-E Rev.9. Page 1
ACCUFLO Conveyor Belt Cleaning System Page 1 Conveyor Belt Cleaning System - System Nomenclature CATGORY MAINFRAM INFORMATION BLAD INFORMATION CP=CONVYOR PRODUCTS CP - PA - 36 M - G 83 SYSTM TYP BLT WIDTH
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 6004 Second edition 1991-08-15 Alpine skis - Ski binding screws - Requirements Skis alpins - Ws de fixation de skis - Spckifkations Reference number Foreword ISO (the International
Micros cleat range Nylon and Aluminium
Open Cleat Micros cleat range Nylon and Small, neat and lightweight for 1- mm /6-5 /2 rope. Advanced tooth technology to hold all types of small rope. Can be fixed with standard screws and rivets, on tubular
Final Assembly Instructions Bikes with 16 Wheel Size
Final Assembly Instructions Bikes with 16 Wheel Size Thank you for buying your new bicycle from L.L.Bean. Read these instructions carefully before beginning the final assembly. Prior to shipping, our expert
Diamond cutting tools Applications guide
Applications guide KLINGSPOR Diamond Cutting Blades are the logical supplement to the Kronenflex Cutting-Off Wheels programme. These wheels provide economical cutting of mineral materials because of their
Final Assembly Instructions Bikes with Threaded Headsets
Final Assembly Instructions Bikes with Threaded Headsets Thank you for buying your new bicycle from L.L.Bean. Read these instructions carefully before beginning the final assembly. Prior to shipping, our
ATHLETICS Track & Field Equipment
ATHLETICS Track & Field Equipment Aluminium Curbing Order No. 11260 The aluminium curbing is made from special made anodized aluminium profiles. It is a mobile marker and separator of the running track.
Belt strength. Available the belt. (kg/m) PP - Polypropylene 2, to [B] PE - Polyethylene 1, to [B]
![Belt strength. Available the belt. (kg/m) PP - Polypropylene 2, to [B] PE - Polyethylene 1, to [B]](/thumbs/94/120596583.jpg "Belt strength. Available the belt. (kg/m) PP - Polypropylene 2, to [B] PE - Polyethylene 1, to [B]")
SERIES E20 FLAT TOP Eurobelt Series E20 Flat Top, due to a closed surface configuration, is the suitable conveyor belt for those applications in which it is not necessary any drainage through the belt
ibridge and ibridge Ultra
2.00 mm Board to Cable Connectors ED. 06 10.2016 Catalog EA IB001 erni.com erni.cn TABLE OF CONTENTS OVERVIEW General 03 Technical Details 04 Features 05 Electrical and Mechanical Characteristics 10 Ordering
CSO/STORMWATER MANAGEMENT. HYDROVEX VHV / SVHV Vertical Vortex Flow Regulator
CSO/STORMWATER MANAGEMENT HYDROVEX VHV / SVHV Vertical Vortex Flow Regulator HYDROVEX VHV / SVHV VERTICAL VORTEX FLOW REGULATOR APPLICATIONS One of the major problems of urban wet weather flow management