BESTOOL GAGE CATALOG

Transcription

1 BESTOOL GAGE CATALOG

2

3 : Size below mm, it is solid type, mm above, one end with handle or, size below 0mm: taperlock plug gauges, 0mm above, one end with handle. Size Plug Gages Go & No Go Solid Ring Gages Go & No Go Size Plug Gages Go & No Go Solid Ring Gages Go & No Go H g H g (mm) (mm) M.X M.0x M.X M.0x M.X M.0x M.0x M.0x M.0x M0.0x M.x M0.0x M.x M0.0x M.x M0.0x M.x M0.0x M3.0x M0.0x M3.0x M.0x M3.x M.0x M3.x M.0x M.0x M.0x M.0x M.0x M.x M.0x M.0x M.0x M.0x M.0x M.0x M.0x M.0x M.0x M.0x M.0x M7.0x M.0x M.0x M7.0x M.0x M7.0x M.0x M7.0x M.0x M7.0x M.0x M7.0x M.0x M7.0x M.0x M30.0x M.0x M30.0x M.0x M30.0x M.0x M30.0x M.0x M30.0x M.0x M30.0x M.0x M33.0x M.0x M33.0x M.0x M33.0x M.0x M33.0x M.0x M33.0x M.0x M33.0x M.0x M3.0x M.0x M3.0x M.0x M3.0x M.0x M3.0x M.0x M3.0x M.0x M3.0x M.0x M3.0x M.0x M3.0x M.0x M3.0x M.0x M3.0x G

4 G Size /-0 /- /-3 /- /- /-3 3/- 3/- 3/-3 7/- 7/-0 7/- /-3 /-0 /- /- /- /- /- /- /- /- 3/- 3/- 3/-0 3/-0 7/- 7/- 7/-0 / /- -/-7 -/- -/- -3/- -/-7 -/- -/- -/- -3/- -3/- -3/- -7/- -/- -/- -/- UNS Class A Class 3A Class B Class 3B Plug Gage Set Adjustable Ring Gage Set Class A Class 3A Solid Ring Gag e Set Used for gaging internal & external thread. Conform to: ASME/ANSI B. ANSI Standard Thread Plug & Ring Gages

5 G /-0 /- /-3 /- /- /-3 3/- 3/- 3/-3 7/- 7/-0 7/- /-3 /-0 /- /- /- /- /- /- /- /- 3/- 3/- 3/-0 3/-0 7/- 7/- 7/-0 / /- -/-7 -/- -/- -3/- -/-7 -/- -/- -/- -3/- -3/- -3/- -7/- -/- -/- -/- UNS Class A Class 3A Truncated Set Plug Gages Conform to: ASME/ANSI B. ASME/ANSI B. ANSI Main purpose for truncated set plug gages: Usage for truncated set plug gages:

6 British Thread Plug & Ring Gages Used for gaging British internal & external thread. Conform: BS.007. ype: Size below mm, it is solid type, mm above, one end with handle or, size below 0mm: taperlock plug gauges, 0mm above, one end with handle. Plug Gages Solid Ring Gages Class Class 3 Class Class / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Plug Gages Solid Ring Gages Class Class 3 Class Class / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / G

7 Gages for Pipe Thread Gages for Straight Pipe Thread(G) ISO Class Used for gaging internal & external thread. Conform: GB/T -00, DIN ISO-, BS EN ISO-:003. Plug Gages Ring Gages T.P.I Pitch(mm) Class T.P.I Pitch(mm) Class A Class B G3/ G/. 3-0 G/ G/. 3-0 G/ G3/ G3/ G7/. 3-0 G7/ G 3-0 G G / 3- G / - -3 G / 3- G / - -3 G / 3- G / - -3 G 3/ 3-3 G 3/ G 3- G - -3 G / 3- G / - -3 G / 3- G / - -3 G 3/ 3-7 G 3/ G3 3- G G3 / 3- G3 / - -3 G 3-0 G Gages for Whitworth Pipe Thread(R) ISO Class Used for gaging internal & external taper pipe thread. Conform: GB/T , ISO7/,DIN, BS/BS EN. Plug Gages Ring Gages R3/ R R / R / R R / R3 R3 / R T.P.I Pitch(mm) Taper Class R3/ R R / R / R R / R3 R3 / R T.P.I Pitch(mm) Taper Class A G

8 ANSI Pipe Thread Gages ANSI Taper Pipe Thread Gages Used for gaging internal & external taper pipe thread. Conform: FED-STD-H/7, ASME B.0.-3,ASME B.0.-. NPT /-7NPT /-7NPT /-NPT 3/-NPT /-NPT 3/-NPT - / NPT /- /NPT /- /NPT - /NPT /-NPT 3- NPT 3 /-NPT -NPT -NPT -NPT Pitch(mm) Plug Gages /-7NPT /-7NPT /-NPT 3/-NPT /-NPT 3/-NPT - / NPT /- /NPT /- /NPT - /NPT /-NPT 3- NPT 3 /-NPT -NPT -NPT -NPT Pitch(mm) Ring Gages NPTF /-7NPTF /-7NPTF /-NPTF 3/-NPTF /-NPTF 3/-NPTF - /NPTF /- /NPTF /- /NPTF - /NPTF /- NPTF 3- NPTF 3 /-NPTF -NPTF -NPTF -NPTF Pitch(mm) Ring Gages Basic Step Ring Gages Basic Step G

9 ANSI Pipe Thread Gages ANSI Taper Pipe Thread Gauges Used for gaging internal & external taper pipe thread. Conform: Fed-std-H/7, ASME B.0.-3, B.0.-. Plug Gages Ring Gages Ring Gages Ring Gages /-7 ANPT /-7 ANPT /- ANPT 3/- ANPT /- ANPT 3/- ANPT - / ANPT /- / ANPT /- / ANPT - / ANPT /- ANPT 3- ANPT Basic Step Basic Step Used for gaging ANSI internal & external straight pipe thread. Conform: Fed-std-H/7, ASME B.0.-. Plug Gages Set Plug Gages Ring Gages Normal Size Normal Size / /-7 3- / /- 3-3/ /- 3-3 / /- 3-3/ / / / 3- /- / /- / 3-7 /- / /- / 3- - / / 3- / / G7

10 Metric Trapezoidal Thread Gages Metric Trapezoidal Thread Gages Used for gaging metric trapezoidal internal & external taper pipe thread. Conform to: ISO0-0, DIN3, GB/T. Plug Gages Ring Gages Plug Gages,7H Ring Gages, 7e Plug Gages,7H Ring Gages, 7e Trx Tr3x Trx Tr3x Trx Tr3x Trx Tr0 x Trx Tr0 x Trx Tr0x Trx Tr x Trx Tr x Trx Trx Trx Tr x Trx Tr x Trx Tr x Tr0x Tr x Tr0x Tr x Trx Tr x Trx Tr0 x Trx Tr0 x Trx Tr x Trx Tr x Trx Tr x Trx Tr x Trx Tr0 x Trx Tr0 x Trx Tr x Trx Trx Tr30x Tr70 x Tr30x Tr70x Tr30x Tr7 x Tr3x Tr7x Tr3x Tr0 x Tr3x Tr0x Tr3 x Tr x Tr3 x Tr0 x Tr3x Tr x Tr3 x Tr0x Tr3 x Trx Tr3x Tr0x G

11 ACME & Butress Thread Gages ACME Thread Gages Used for gaging ACME internal & external taper pipe thread. Conform to: ASME B.-7 for ACME, ASME B.- for STUB ACME Plug Gages Ring Gages /-ACME /-ACME 3/-ACME /-ACME /-ACME 3/-ACME 7/-ACME -ACME /-ACME /-ACME 3/-ACME /-ACME 3/-ACME -ACME TPI /-ACME /-ACME 3/-ACME /-ACME /-ACME 3/-ACME 7/-ACME -ACME /-ACME /-ACME 3/-ACME /-ACME 3/-ACME -ACME TPI ANSI Buttress Thread Gages Used for gaging ANSI Buttress internal & external threads. Conform: Fed-std-H/, ANSI B.. Size TPI Size TPI / / 0-00 / / -00 / / -003 / / 0-00 / / -00 / / -00 / / / / -00 / / -00 / / 0-0 / 3-30 / -0 / 3-30 / -0 3/ / -03 3/ / -0 3/ / -0 7/ / -0 7/ / -07 7/ / G

12 Screw Pitch Gages Screw Pitch Gages For use when quick identification of screw pitchosis needed. American National-0 Threads Whitworth standard- Threads. Screw Thread Gage Gages 7-/ British, -/ Acme, Whitworth & & 0 USA & Metric Made from stainless steel with satin chrome finish Deep etched graduations All gage surfaces are ground - ACME Screw Pitch Gages For grinding & setting tools when cutting Acme threads whose sides have inclination Made from stainless steel with satin chrome finish Angle & edges are precision ground No. of Blades TPI, Inch 3-0 TPI, Metric 0 -TPI, Inch -TPI, Metric 0 - TPI, Inch 0-0 TPI, Inch 0 -TPI, Inch &.-mm,metric 0 Inch Acme Screw Pitch,,-/3,-/, -3/,,-/,3,3-/,,,,7,,,,. 30 Metric Acme Screw Pitch,,3,,,,7,,,,,, mm, 0 0.-mm, mm, mm, mm, mm, mm, mm, mm, 0,-/,,,7,,,,,,3,,,,,0,,,,,,30,3,3,0,,0,; Whitworth Specifications Threads:, 3,,,, 7,,,,;,.,3,3.,,,,7, - Angle: &0 Threads:, 3,,,, 7,,,, -7 Angle: 0, 0,,0,70,7,0 Threads:,.,3,3.,,.,,, 7, - Angle:,3.,,0,70,,0 Acme Screw Thread Gage Foe grinding & setting tools when cutting Acme threads whose sides have an inclination of -/ Angle & edges are precision ground. Specifications Threads:, -/3, -/, -3/,,-/, 3,,,, 7,,, Material Stainless Steel Carbon Steel Acme Screw Thread Gage Foe grinding & setting tools when cutting Acme threads whose sides have an inclination of Made from stainless steel with satin chrome finish Angle & edges are precision ground. Specifications Threads:, 3,,,, 7,,,, - G

13 Thread Wire Gage & Micrometers Center Gages Screw Thread Micrometers 0 or 0 or V-Anvil and knife edged anvils are optional. Ratchet stop. Laser engraved graduations. Painted frame. Metric std. 0-0 Whitworth std. - U.S. std Wire Thread Measuring Sets Pieces, different sizes for all 0 threads Measures all threads from 3 to threads per inch and all metric from 0.mm to mm pitch. 3 wire method is the best method of measuring external threads. Wires are fitted in a plastic case stamped with sizes. Laminated chart compiled from the U.S. Standard. Gives proper sizes & measurement over wires or mm - 0 mm 0-7 mm 7-0mm 0-mm -0mm 0.0mm Digital Screw Thread Micrometers 0 or V-Anvil and knife edged anvils are optional. Ratchet stop. Painted frame. IP,DIN000/IEC. No. of Wires Specifications Threads from 3 to threads per inch and metric from 0.mm to mm pitch IP, mm -0 mm 0-7 mm 7-0mm 0-mm -0mm 0.00mm or 0 or Optional V Anvils mm/-TPI 0.-0.mm/-TPI -.7mm/-TPI -3mm/3- TPI 3.-mm/ - TPI.-7mm/.-3.TPI 0 Anvils TPI -0TPI 0-3TPI 3-TPI -TPI -TPI -TPI -7 TPI 7-.TPI.-3.TPI Anvils G

14 API Thread Gages API Spec B Working Thread Gages Used for gaging API internal & external threads. Conform: API Spec B. TPI Taper / CSG/STC LCSG/LTC 0-0 CSG/STC LCSG/LTC 0-0 / CSG/STC LCSG/LTC 0-03 / CSG/STC LCSG/LTC CSG/STC LCSG/LTC / CSG/STC LCSG/LTC 0-0 / CSG/STC LCSG/LTC 0-07 / CSG/STC LCSG/LTC 0-0 3/ CSG/STC LCSG/LTC 0-0 3/ CSG/STC 0-00 LCSG/LTC / CSG/STC 0-00 LCSG/LTC 0-0 CSG/STC 0-00 LCSG/LTC 0-0 / CSG/STC LCSG/LTC CSG/STC 0-00 LCSG/LTC 0-0 Spec B Spec B TPI Taper / LP / LP / LP / LP / LP LP / LP / LP LP / LP 3 LP 3 / LP LP LP LP LP LP LP / / / / / BCSG/BTC BCSG/BTC / BCSG/BTC / BCSG/BTC 7 BCSG/BTC 7 / BCSG/BTC / BCSG/BTC / BCSG/BTC 3/ BCSG/BTC 3/ BCSG/BTC 3 3/ BCSG/BTC BCSG/BTC TPI Taper G

15 API Thread Gages API Spec B Workig Thread Gages Used for gaging API internal & external threads. Conform: API Spec B. Spec B Spec B.00 TBG/NUE.3 TBG/NUE.0 TBG/NUE.00 TBG/NUE 3/ TBG/NUE 7/ TBG/NUE 3 / TBG/NUE TBG/NUE / TBG/NUE TPI Taper UPTBG/EUE.3 UPTBG/EUE.0 UPTBG/EUE.00 UPTBG/EUE 3/ UPTBG/EUE 7/ UPTBG/EUE 3 / UPTBG/EUE UPTBG/EUE / UPTBG/EUE TPI Taper API Spec 7- Workig Thread Gages Used for gaging API internal & external threads. Conform: API Spec 7-. Spec 7- Spec 7- TPI Taper 3 / FH : 0-00 FH(NC0) : 0-00 / FH : / FH : 0-00 REG(AMT) / REG / REG(AMT) 3/ REG 7/ REG 3 / REG / REG / REG / REG 7 / REG / REG TPI 7 Taper : : : : : : : : : : : / FH Spec 7-3/ IF(NC) 7/ IF(NC3) 3 / IF(NC3) IF(NC) / IF(NC0) / IF TPI : Taper : : : : : : G3

16 API Thread Gages API Spec 7- Working Thread Gages Spec 7- Spec 7- TPI TPF 7/ 0-0 NC NC NC3 NC NC3 NC ( 3/IF, 7/SH) NC3 ( 7/IF,3 /SH) NC3 NC3 (3 /IF,XH, /SH) NC0 (FH, /DS) NC NC (IF, /XH,WO) NC0 ( /IF/WO,XH, /DS) NC NC NC70 NC77 TPI Taper : : : : : : : : : : : : : : : : : / Spec 7-3/ ( REG) / /( / REG) / Spec 7-3/ TPI TPI 7 TPF / / / / / TPF Spec 7-3/ 0-0 TPI TPF 3/SL 3 / 0-0 7/SL 3 / /SL 3 / / 3 / / 0-0 / 3 / / 0-0 / 3 / 0-0 / 3 / / / 3 / / 3 / Spec 7- TPI TPF 3/ / / / / / G

17 API Thread Gages API Spec B API Spec B Sucker & Polished Rod Gages API Spec B / (CYG3) / (CYG) 3/ (CYG) 7/ (CYG) (CYG) / (CYG) Description P- Go Ring P- Ring for Pin Cone P- No Go Ring for Pin Cone P- Go Pin Ring B- Go Plug B- Plug B- No Go Plug API Spec B / (CYG3) / (CYG) 3/ (CYG) 7/ (CYG) (CYG) / (CYG) Description P- Go Plug Master P- Go Ring Master P-3 Pin Cone Plug Master P- Ref Ring for Pin P- Master No Go Pin Plug P- Ref No Go Pin Ring P-7 Master Go Pin Plug P- Ref Go Pin Ring B- Master Go Ring B- Ref Go Plug B-3 Master Cone Ring B- Ref Plug B- Master No Go Ring B- Ref No Go Plug G

18 Pipe Thread Measuring Instruments Pipe Thread Measuring Instruments These measuring instruments are high accuracy and total more than 0 items mainly apply in casing, tubing and so on. Please check the instruments from following items, we will pack these instruments as right package, which will have good protection for these instruments. Taper Measuring Instruments for External Thread in(<=in/m m ) Indicator:0-0.in Grad:0.00in -in(03.-0.mm) Indicator:0-0.in Grad:0.00in JZW JZW G

19 Pipe Thread Measuring Instruments Taper Measuring Instruments for Internal Thread Conform: API B. -in(.-.mm) Indicator:0-in Grad:0.00in -/-in(3.7-0.mm) Indicator:0-0.in Grad:0.00in JZN0 JZN 0-0- Thread Pitch Measuring Instruments/Lead Gages Conform: API B. 0.-in(.7-.mm) Grad:0.0m m WRW in(.7-.mm) Grad:0.0m m WRN 0-3 G7

20 Pipe Thread Measuring Instruments Thread Height Measuring Instruments Conform: API B. Resolution WGW 0- Resolution WGN 0-3 Resolution WGW 0- G

21 Pipe Thread Measuring Instruments Buttress Casing Thread Vanishing Point Gauge Resolution XSG 0- Coaxial Meter Resolution JTG 0-0-mm Resolution 0.0mm XX inch HXY 0- G

22 Pipe Thread Measuring Instruments Pitch Diameter Gauge for External Thread < -/ 3/-0 ZJY-W ZJY0-W 0-0- Pitch Diameter Gauge for Internal Thread ZJY-N ZJY0-N Screw Thread Profile Microscope CKY 0-70 G0

23 Calibrator LJK LJK LJK3 LJK LJK LJK JYY- 0-7 Pit Depth Gage Specification CGK CGK CGK3 CGK CGK CGK Measuring Points for Gages Resolution 0.0mm ATY 0-73 Diameter CLT CLT CLT3 CLT CLT G

24 Heavy Duty Vernier Calipers Basic Model Long 0-division vernier scales have wide spread easy to read, clear engraved crisp black graduations in /00. Longer jaws permit greater accessibility and simpler measurement of larger work pieces. With fine adjustment Jaw Length 3 Vernier Scale Lower Upper.0mm.00.0mm.00.0mm.00.0mm.00.0mm.00.0mm.00.0mm.00 Carbon Steel Stainless Steel * -70* * 7 Jaw Length 0-300mm 0-0mm 0-00mm 0-00mm 0-00mm 0-00mm 0-000mm Jaw Length 7mm 0mm 0mm 0mm mm 00mm 00mm Graduation.0mm.0mm.0mm.0mm.0mm.0mm.0mm Carbon Steel Stainless Steel Long Jaws Long 0-division vernier scales have wide spread easy to read, clear engraved crisp black graduations in /00. Longer jaws permit greater accessibility and simpler measurement of larger work pieces. With fine adjustment. Made of stainless steel mm/ 0-00mm/0 0-70mm/ mm/0 Jaw Length Graduation Jaw Length Graduation Heavy Duty Digital Calipers No Upper Jaws,with Fine Adjustment Manual power on/off. Inch/mm conversion (.0mm/.000 ), Data hold function. Fast tracing of maximum or minimum value. SPC out put. 00mm/0 00mm/ 00mm/0 00mm/0 000mm/0 0mm 00mm Jaw Length Jaw Length mm Jaw Length mm Jaw Length G

25 Fixed Snap Gages Fixed Snap Gages When order, as B-Size-Accuracy When order, as A-Size-Accuracy <=3mm 0-3mm 3-mm -mm -mm -mm -mm -30mm 30-0mm 0-0mm 0-mm -0mm c, d, e, f, g, h, j, js,k, m, n, p, r, s, u, x, z When order, as B-Size-Accuracy 3-mm -mm -mm -30mm 30-0mm 0-0mm When order, as A-Size-Accuracy 0-0mm 0-0mm 0-0mm 0 & & 0& c, d, e, f, g, h, j, js, k, m, n, p, s, u, x, z When order, as C-Size-Accuracy When order, as A-Size-Accuracy 0-mm -0mm 0-0mm 0-00mm 00-mm -0mm ,3,7,,,,0,70, 7,,,07, c, d, e, f, g, h, j, js, k, m, n, p, s, u, x, z When order, as D-Size-Accuracy G3

26 Adj Snap Gages&Limit Gages Adjustable Snap Gages Used for gaging limit sizes for parts. / Conform: ISO 70-. Limit Plug & Ring Gages : Size below mm: solid type, mm above: one end with handle; or, size below 0mm: taperlock plug gauges, 0mm above, one end with handle. Material: Steel or Carbide Gages, below item# is for steel, if you need to order carbide gages, just replace code to 7-xxx or -xxxx. Size Ring Gage Size Ring Gage (mm) Frame No (mm) H h (mm) H h G

27 Pin Gage Sets Inch Sets Laser marking size, size is quite clear. Each set has a certificate, to state the accuracy of each size. Smooth finish micro or better, uniform length, or special order. A must for checking hole diameter & dis tance between holes and hole location. Sizes marked on storage case. All gages Class ZZ. M0 Plus M0 Minus M Plus M Minus M Plus M Minus M3 Plus M3 Minus M Plus M Minus M Plus M Minus M Plus M Minus M7 Plus M7 Minus Size 0.0 to to to to to to to to to to to to to to to to Metric Sets Heat treated to a hardness of 0/ HRC. 0mm / 0mm overall length with sharp corners broken. / Sets include fitted wooden case. Tolerance No. of Piece (mm) Step (mm) mm mm /-0.00mm /-0.00mm mm mm G

28 Steel Pin Gage Sets Class ZZ, +/-.000 Tol. Go/No-Go gage handle furnished with each set Consists of 3, Drawer Cabinets Ceramic Pin Gage Sets Super ior abrasion restance prolongs service life. Because ceramic pin gage are free frome corrosion, they can be handled with bare hands do not require special maintenance or rist prevention treatment. Similar coefficient of thermal expansion to steel, it can be used for measuring steel parts. Size Gage Set No. M0 to M Mto M Mto M3 M0 to M3 M to M7 M0 to M7 M to M7 Plus Minus Size(mm) Steps 0.0mm 0.0mm 0.0mm 0.0mm 0.0mm 0.0mm 0.0mm 0.0mm 0.0mm Length 3mm 3mm 0mm 0mm 0mm 0mm 0mm 0mm 0mm Tol:+/- m Round:0. m Tol:+/- m Round:.0 m Pin Gage Handles One set uses one handle, handles cover all sizes Size Collets are spring adjusting and self-centering design, which are used for whole rang of sizes of pin gage sets. Handles & Collets are made from aluminum to protect pin gages. Color coded Handle for GO/NO GO checking. Power coated handle body. One handle with two free collets. /3 - / One handles cover sizes /3 thru /" Handles all pin gages sizes from: /3 thru /" Go and no go clearly marked Casting Aluminium Specification Handle for.0" to.00" M0 0pcs Handle for.0" to.0" M 0pcs Handle for." to.00" M 0pcs Handle for.0" to." M3 pcs Specification Handle for." to.70" M pcs Handle for.7" to.3" M pcs Handle for.33" to." M pcs Handle for.7" to.000" M7 pcs Inch Gage Block Sets Gage Block Accuracy Table Higher degree of accuracy when used at temperature of F(0 C). Individual serial numbers on each block,regardless of grade. A complete certificate of calibration traceable to the N.I.S.T. showing the deviation of each block. All sets are supplied in deluxe fitted wood case. All sets meet or exceed Fed.Spec. ASME B..-00 Mirror polished surfaces provide superior wringing characteristics. Nominal Size Thru.00 Thru.00 Thru Thru. Thru.3 Thru. Tolerances(in millionths of an inch) Grade 0 +/- +/- +/- +/- +/- +/- Grade AS- +/- +/- +/- +/- +/-0 +/- Grade AS- +/- +/- +/- +/-3 +/-0 +/- Grade Economy +/-0 3 Piece Rectangular Gage Block Sets Sets Included: Blocks: 0.00 Blocks: by steps Blocks: by 0.00 steps Blocks: by 0.0 steps Blocks: by 0.0 steps 3 Blocks:,, Piece Steel Square Gage Block Sets Sets Included: Blocks: 0.00 Blocks: by steps Blocks: by 0.00 steps 7 Blocks: by 0.00 steps Blocks: by.000 steps Grade 0 AS- AS- Economy Steel Solid Carbide Grade 0 AS- AS- Economy G

29 Inch Gage Block Sets Piece Rectangular Gage Block Sets Sets Included: Blocks: 0.00 Blocks: by steps Blocks: by 0.00 steps 7 Blocks: by 0.00 steps Blocks: by.000 steps Inch Ceramic 3&Pcs Gage Block Sets Grade 0 AS- AS- Economy Steel Solid Carbide Grade 0 AS- AS- Economy 3 Piece Piece Special Steel Gage Block Sets Metric Micrometer Checking Sets Caliper Inspection Set ISO30 ISO30 Sets Included: Block: 30mm Block:.3mm Block: 3.mm Set Pcs Pcs Specifications Gage Blocks,:.,., 7.7,.3,.,.0, 7., 0.,.,.0mm Optical Flat: 30mmDia. x mm Gage Blocks,:,.,.,, 3,,,, 0,.0mm Optical Flat: 30mmDia. x mm Grade Steel Setting Rings: mm, mm Pair of gloves. Gage Block Grade: Class Inch Micrometer Checking Sets A certificate shows individual deviation of each block. Gage blocks traceable to the NIST. -Piece feature optical flats with.0 step for checking spindle at half revolution. Optical flats are.000 thickness accuracy,.00000", Flatness,.0000" Parallel. -Piece sets & -Piece sets feature different blocks combination for precision checking of different ranges. Each blocks is serialized. with Fitted wooden case. Set Pcs Pcs Pcs Pcs Specifications Gage Blocks, Grade 0:.0,.0,.,.00,.0,.300,.00,.000 &.000 Optical Flat: Dia. x. Thickness. Gage Blocks, Grade AS-:.0,.0,.,.00,.0,.300,.00,.000 &.000 Optical Flat: Dia. x. Thickness. Gage Blocks Grade 0:.,.,.3,.0,.00,.0,.7,.,.0,.000 Optical Flat: Dia. x.000 &. Thickness. Gage Blocks Grade AS-:.,.,.3,.0,.00,.0,.7,.,.0,.000' Optical Flat: Dia. x.000 &. Thickness. Large Size Steel Gage Block Sets Inch Piece/Set Metric Piece/Set Size,, 7,,,,, 0 Size mm,0mm,7mm,00mm, 0mm,300mm,00mm,00mm mm, 0mm, 7mm, 0mm mm, 0mm, 7mm 00mm Grade AS- 30- AS- 30- Economy 30-3 Grade 0 Grade Grade G7

30 G Piece/Set Nominal Sizes (mm) , Steps(mm) , Blocks Metric Gage Blocks meet ISO30, DIN, & JIS Specifications are supplied as indicated in the table. Ceramic Metric Gage Block Sets Steel Solid Carbide Grade

31 Gage Block Accessories Gage Block Accessory Sets No of set Pcs/set Pcs/set 7Pcs/set Gage Block Accessory Sets Specifications Clamps: 0,0&00mm; Radius Cylindrical Jaws: &mm; Scriber; Center Point;Base Block Clamps: 0,0&00mm; Radius Cylindrical Jaws:,&mm; Beveled Ends jaws:0mm;scriber; Center Point:Knife Edge Jaws Clamps: 0,0&00mm; Radius Cylindrical Jaws:,&mm; Beveled Ends jaws:0mm;scriber; Center Point;Knife Edge Jaws;Base Block Metric No of set 3Pcs/set 7Pcs/set Gage Block Accessory Sets Specifications Clamps: &, Radius Jaws: 0.7 pair, Flat Jaws: Scriber Point, Center Point, Tram Point, Jaws with ref lines, Base Block Clamps:.,, &,Radius Jaws: 0.,0.,0.&0.7, Parallel Jaw: &, Flat Jaws:, Scriber Point, Center Point, Tram Point, Jaws with Ref lines, Base Block Inch Individual Gage Block Accessories Mounting surfaces of each accessories are lapped flat and parallel with gage blocks and base. Metric Base Blocks Metric Clamps Beveled Ends Jaw Knife Edge Jaws Size: LxWxT x7xmm 3-00 Inch Base Blocks Capacity 0mm 0mm 00mm 300mm Size: TxWxL: xx0mm Metric 3-00 Inch Size: Total Length: 0mm Inch Jaw with Ref Line 00mm 00mm 00mm Size 0.3x0.7x" 0.3x0.7x Size: LxWxT x-3/x.7" 3-3 Inch Clamps Inch Tram Point Size:.7x.33x.3" 3-37 Radius Cylindrical Jaws Size: R0.77x0.73" 0mm Straight Edge 3-3 Capacity. 3-3 Scriber Point Metric Size: Total Length: mm 3-7 Radius Rxmm Rxmm Rx0mm Center Point 3-3 Metric Total Length: mm 3-00 Inch Total Length:." Connecting Holder Inch Size: 3-3 Radius R0."x0.3" 3-3 Size: Dia.xmm Inch Flat Jaw R0."x0.7" R0."x0." R0."x.7" R0.7"x." Size: Dia 0.33x Total Length: 0.3x.7x 3-33 For holding 0mm or up with two holes G

32 G30 Basic Thread Designation M.x0.3 Mx0. M.x0. M3x0. M3.x0. Mx0.7 Mx0. Mx Mx. Mx Mx. Mx. Mx0.7 Mx.7 Mx. Mx. Mx Mx Mx. Mx Mx Mx. M7x Mx. M0x. M0x. M0x Mx. Mx. Mx3 Mx Mx. M7x3 M7x M30x3. M30x M30x. M33x M3x. M3x M3x M3x Metric threads Standard series-internal Threads Only(Class H) Min Pitch Dia Max Pitch Dia Min Minor Dia Max Minor Dia

33 G3 Basic Thread Designation M.x0.3 Mx0. M.x0. M3x0. M3.x0. Mx0.7 Mx0. Mx Mx. Mx Mx. Mx. Mx0.7 Mx.7 Mx. Mx. Mx Mx Mx. Mx Mx Mx. M7x Mx. M0x. M0x. M0x Mx. Mx. Mx3 Mx Mx. M7x3 M7x M30x3. M30x M30x. M33x M3x. M3x M3x M3x Metric threads Standard series-external Threads Only(Class g) Max Major Dia Min Major Dia Max Pitch Dia Min Pitch Dia

34 G3 Norminal Size 0-0NF, -NC, -7NF, -NC, -NF, 3-NC, 3-NF, -0NC. -NF, -0NV, -NF, -3NC, -0NF, -3NC, -3NF, -NC, -3NF, -NC, -NF, -3NEF, /-0NC, /-NF, /-3NEF, /-NC, /-NF, /-3NEF, 3/-NC, 3/-NF, 3/-3NEF, 7/-NC, 7/-0NF, 7/-NEF, /-N,UN /-3NC, /-0NF, /-NEF, /-NC, /-NF, Inch threads standard series-internal Threads Only(American National & Unified series) /-NEF, /-NC, /-NF, /-NEF, /-NEF, 3/-NC, 3/-NF, 3/-0NEF, 3/-0NEF, 7/-NC, 7/-NF, 7/-0NEF, /-0NEF, "-NC, "-N, "-NS,UNS "-0NEF, /-N,UN /-NEF, /-7NC. /-NF, /-NEF, 3/-N,UN 3/-NEF, /-7NC, /-NF, /-NEF, /-N,UN /-NEF, 3/-NC, 3/-NF, 3/-NEF, 7/-N,UN 7/-NEF, /-NC, /-NF, /-NEF,

35 G33 Norminal Size 0-0NF, -NC, -7NF, -NC, -NF, 3-NC, 3-NF, -0NC. -NF, -0NV, -NF, -3NC, -0NF, -3NC, -3NF, -NC, -3NF, -NC, -NF, -3NEF, /-0NC, /-NF, /-3NEF, /-NC, /-NF, /-3NEF, 3/-NC, 3/-NF, 3/-3NEF, 7/-NC, 7/-0NF, 7/-NEF, /-N,UN /-3NC, /-0NF, /-NEF, /-NC, /-NF, Inch threads standard series-external Threads Only(American National & Unified series) /-NEF, /-NC, /-NF, /-NEF, /-NEF, 3/-NC, 3/-NF, 3/-0NEF, 3/-0NEF, 7/-NC, 7/-NF, 7/-0NEF, /-0NEF, "-NC, "-N, "-NS,UNS "-0NEF, /-N,UN /-NEF, /-7NC. /-NF, /-NEF, 3/-N,UN 3/-NEF, /-7NC, /-NF, /-NEF, /-N,UN /-NEF, 3/-NC, 3/-NF, 3/-NEF, 7/-N,UN 7/-NEF, /-NC, /-NF, /-NEF,

36 BESTOOL