Drilling & Down-hole Completion Tools

Transcription

1 BLANKING PLUGS MODEL: WC-BPL-X [Go] & WC-BPL-XN [No-Go] PRODUCT No.: WC & WC These are wirele operated combation tool of Lock mandrel, Equalizg prong and Equalizg sub, set respective landg nipple of correspondg size and type, the flow path to plug the tubg, used as flow control devices. Plugs are utilized for holdg pressure differentials from above or below when set at relevant profile of Landg Nipples. Features/Benefits: Maximum versatility reducg completion and production matenance costs. Allows for repositiong of flow controls as well conditions change. Keys of lockg mandrel retracted to assembly while runng and retrievg. Runng tool allows selection of nipple to land and set the lock. Maximum flow capacity from large, straight-through bore of lockg mandrel. Nipples stalled tubg strg any order- reducg workover risk Provides unlimited number of positions to set. Same ID all nipples reducg flowg pressure loss and mimizg turbulence. Applications: Selected zones can be produced or shut. To pressure test tubg. To isolate tubg for wellhead repair or removal To set hydraulic actuated packers. To snub tubg or out of the well. Drillg & Down-hole Completion Tools WC BPL X WC BPL XN

2 Drillg & Down-hole Completion Tools BOTTOM BYPASS BLANKING PLUGS MODEL: WC-FSG [Run all Model: WC-LNP-F Nipples] MODEL: WC-FWG [Run Top No-Go Model: WC-LNP-F Nipples] MODEL: WC-RZG [Run Bottom No-Go Model: WC-R Nipples] PRODUCT No.: WC-23801, WC & WC These types of plugs are run the bypass position to allow the passage of well fluid through the assembly, while landg the equipment a Nipple Profile. Runng Tool [Model: WC-C1] is used to run the plug. Once set the Nipple Profile this group of plugs can hold pressure from above and below. The pressure is equalized prior to retrieval by pullg the Equalizg Mandrel. A standard Pullg Tool and proper Probe for the style of Lock is used to pull the plug assembly. This Bottom Bypass Blankg Plugs are manufactured for Standard, H2S & CO2 well environment services/conditions. Applications: Selected zones can be produced or shut. To pressure test tubg. To isolate tubg for wellhead repair or removal To set hydraulic actuated packers. To snub tubg or out of the well. Tubg Nipple Accessory Equalizg Lock For Top For Bottom Runng Tool B Probe Mandrel Mandrel No-Go No-Go Tubg Nipple Plug Pullg Tool Type WC-C1 Fishg Fishg Maximum Maximum /Seal Bore Neck OD Neck ID Plug OD Plug OD ch ch ch ch ch OTIS CAMCO ch ch ch ch 2 1/ /16 2 1/16 40SB6 JDC RB17 JUC /8 2 3/8 2 3/ SB1 JDC RB18 JUC / /8 2 7/8 40SB2 JDC RB19 JUC / /2 3 1/ SB9 JDC RB20 JUC / /2 4 1/ SB10 JDC

3 WC FSB WC LNP F WC FWB WC LNP FN Drillg & Down-hole Completion Tools DOWNHOLE INSTRUMENT HANGERS MODEL: WC-FSB [Run all Model: WC-LNP-F Nipples] MODEL: WC-FWB [Run Top No-Go Model WC-LNP-F Nipples] MODEL: WC-RZB [Run Bottom No-Go Model WC-LNP-FN Nipples] PRODUCT No.: WC-23501, WC & WC These types of hangers are used to hang struments such as Pressure and Temperature Gauges while recessed a Landg Nipple Profile. Recorders are held securely place when recordg data durg high production rates. Pressure data is easily correlated between runs, as recorders are always landed at the same depth. The hangers permit simultaneous surveys to be done on several zones at the same time. Standard wire-le equipment is used to set and retrieve these hangers. These Hangers are available with selective Landg Nipples (e.g.: F Type, Top No Go & Bottom No Go) for Standard, H2S and CO2 service conditions. LANDING NIPPLES [F-TYPE] MODEL: WC-LNP-F & WC-LNP-FN [Bottom No-Go] PRODUCT No.: WC Landg Nipples are of selective, Top No-Go & Bottom No-Go type retag available for respective model of lockg devices. Landg nipples are provided with lockg profile and honed seal bore to locate flow control devices such as velocity safety valves, blankg plugs, equalizg check valves and strument hangers etc. Numbers & location of landg nipple should be carefully considered the completion design stage to allow maximum variation position of various flow control devices. Landg Nipples are available with high tensile alloy steels or API standard grade of materials with API standard or premium thread end connections to suit customer requirements or well environment (standard or H2S/CO2 services). It is available up-to 15,000 Tubg Landg Nipple Seal Bore M. OD No-Go ID

4 LANDING NIPPLE S MODEL: WC-LNP-X [X Type] & WC-LNP-XN [Bottom No-Go] PRODUCT No.: WC & WC MODEL: WC-LNP-R [R Type] & WC-LNP-RN [Bottom No-Go] PRODUCT No.: WC & WC LOCK MANDRELS MODEL: WC-LM-X & WC-LM-XN PRODUCT No.: WC & WC MODEL: WC-LM-R & WC-LM-RN PRODUCT No.: WC & WC Landg nipples are run to the well on the completion tubg to provide a specific landg location for subsurface flow control equipment. The common ternal profiles of these Landg Nipples make them universal. WC-LNP-X Landg Nipple is used standard weight tubg while WC- LNP-R Landg Nipple is typically used with heavy weight tubg. The completion can have as many selective nipples with IDs desired sequence on the tubg strg. This requires number of positions of Landg Nipples for settg and lockg subsurface flow controls. The flow controls required to be placed side the well is attached to the required lock mandrel and run to the well via the selective runng tool on slick le/wirele. The slick-le operator usg the selective runng tool can set the flow control the selective landg nipple at the desired depth. Once location is found to be unsatisfactory or well conditions gets changed, the flow control equipment could be moved up or down the tubg strg to another landg nipple location. These operations can be done by wirele/slick-le under pressure without killg the well. Bottom No-Go equipments are designed for use sgle nipple stallations or as the bottom nipple a series of selective or Top No- Go landg nipples. These landg nipples have the same packg bore ID for a particular tubg size and weight. Here N designates Bottom No-Go. Features / Benefits: Large Bore for mimum restriction Universal nipple with one ternal profile Retractable lockg Keys Locks designed to hold pressure from above or below from sudden reversals Optional hold down Interference hold-down for smaller locks Shear p hold-down for larger locks Drillg & Down-hole Completion Tools WC LNP X WC LNP XN WC LNP R WC LNP RN WC LM X WC LM R

5 Drillg & Down-hole Completion Tools SIZE WEIGHT lb/ft TUBING ID X and XN LANDING NIPPLES AND LOCK MANDRELS FOR STANDARD TUBING WEIGHTS X PROFILE XN PROFILE LOCK MANDREL DRIFT SEALING BORE SEALING BORE NO-GO ID ID mm mm mm mm 2 1/ / / / / / SIZE 2 3/8 2 7/8 3 1/ / / R and RN LANDING NIPPLES AND LOCK MANDRELS FOR HEAVY TUBING WEIGHTS TUBING RPROFILE RN PROFILE LOCK MANDREL WEIGHT ID DRIFT SEALING BORE SEALING BORE NO-GO ID ID lb/ft mm mm mm mm

6 EQUALIZING CHECK VALVE CHOKE MODEL: WC-ECVC PRODUCT No.: WC The equalizg check valve choke is a top No-Go wire-le retrievable tool which controls upward flow and prevents downward flow. It is landed and set the F Type landg Nipple. An tegral, erosion resistant, ceramic orifice is sized to control the upward flow as desired, while downward flow is checked with a ball and seat device. Pressure can be equalized across the valve by breakg the equalizg plug. Tubg Seal Bore ECVC Max OD C1 Runng Tool To Run To Equalize To Pull N1 Shank A Guide A Prong Pullg Tool Drillg & Down-hole Completion Tools N1 Probe 2 3/8 2 7/8 3 1/2 4 1/ /8 2 3/8 1/2 2 7/8 2 7/8 1/2 3 1/2 3 1/2 5/8 4 1/2 4 1/2 5/8 40RB17 40SB1 JUC-TD15185 JDC-TD RB18 40SB2 JUC-TD15189 JDC-TD RB19 40SB9 JDC15181 JUC RB20 40SB10 JDC15183 JUC /8 2 7/8 3 1/2 4 1/2

7 Drillg & Down-hole Completion Tools EQUALIZING CHECK VALVES MODEL: WC-ECV-F [Run all Model: WC-F Landg Nipple & L Slidg Sleeve] & WC-ECV-FN [Run all Model: WC-FN Landg Nipple] PRODUCT No.: WC & WC Equalizg Check Valves are complete equipment units, without any Lockg Device. They are utilized the respective tubg mounted equipments. Both models are run to a landg nipple or slidg sleeves profile through wirele operated tools to hold pressure from above only. 'WC- ECV-F' model check valve lands on the top of a 'WC-LNP-F' landg nipple profile while the 'WC-ECV-FN' model seats on the Bottom No-Go shoulder of a WC-FN' landg nipple. A WC-C1 Runng Tool is used to run both valve assemblies. Both models can be equalized prior to retrieval, by shiftg open the Equalizg Mandrel Ports. Standard Pullg Tool is utilized for retrieval of these valves. Equalizg Check Valves are manufactured for Standard, H2S and CO2 service conditions. Applications: Can be used as a pluggg device for pressure testg of tubg. To set hydraulically actuated packer with the check valve at down. For gas lift operations. To be used as a standg valve wells with down-hole Electric pumps. WC ECV F WC ECV FN Tubg Nipple Seal Check Valve Bore WC-C1 Runng Tool To Run To Pull Jar Down Pullg Tool type Pullg Tool ECV-F ECV-FN Max. OD Max. OD Inches OTIS CAMCO OTIS CAMCO 2 1/ /16 40SB6 JDC SB6 JDC / RB17 JUC /8 40SB1 JDC SB1 JDC / RB18 JUC /8 40SB2 JDC SB2 JDC / RB19 JUC /2 40SB9 JDC SB9 JDC / RB20 JUC /2 40SB10 JDC SB10 JDC

8 Drillg & Down-hole Completion Tools GS PULLING TOOL MODEL: WC-PTGS PRODUCT No.: WC The Model: WC-GS Pullg Tool is a wirele service tool designed to retrieve flow control devices from well bore. Pullg Tool is designed to engage an ternal type fishg neck. The tool is available a wide range of sizes for standard, H2S or CO2 service well conditions. The Pullg Tool is designed to be released from the down-hole device by downward jarrg. GR PULLING TOOL MODEL: WC-PTGR PRODUCT No.: WC A shear up adapter is available for convertg a GS Type Pullg Tool to GR pullg tool. The shear p on the GS Pullg Tool must be removed. The complete assembly, now a Type GR Pullg Tool will operate with a shear-up to release action stead of a shear down. Conversion adapters are available to suit all sizes of GS Pullg Tool R PULLING TOOL MODEL: WC-PTR PRODUCT No.: WC The WC-R Pullg Tool is a wirele service tool designed to remove retrievable subsurface devices with external fishg necks from a well. This tool utilizes a set of three dogs to engage the fishg neck. The WC-R Pullg Tool is available a wide range of sizes, with three reaches each sizes. All tools can be supplied for standard or H2S service.

9 Drillg & Down-hole Completion Tools S PULLING TOOL MODEL: WC-PTS PRODUCT No.: WC The S Pullg Tool is a wirele service tool designed to remove retrievable subsurface devices with external fishg necks from a well. This tool utilizes a set of three dogs to engage the fishg neck. This Pullg Tool is available a wide range of sizes, with three reaches each size. All tools can be supplied for standard or H2S service. By changg only the core of the S Pullg Tool, it is possible to obta SB, SS or SJ types Pullg Tools. The WC-S Pullg Tool is designed to be released from the down-hole device by downward jarrg. Therefore the WC-S Pullg Tool is particularly suited for use as a pullg tool when extensive jarrg is required. Because of the downward shear release of the WC-S Pullg Tool, it is particularly useful as a runng tool for collar stops, pack-off anchor stops, and other subsurface devices landed agast a positive no-go. SIZE TYPE TO ENGAGE REACH MAX O.D. FISHING NECK O.D. TOP THREAD CONNECTION 1 1/2 SB / /2 SS / SB / SS / /2 SB / /2 SS / SB / SS / SB /16-10

10 Drillg & Down-hole Completion Tools X LINE RUNNING TOOL MODEL: WC-RTX PRODUCT No.: WC The X Le Selective Runng Tool is designed to stall subsurface control equipments usg a type WC-LM-X Lockg Mandrel. The selective features of the WC-X Le Runng Tool allow the operator to stall the down-hole device a pre-determed WC-LNP-X Landg Nipple by adjustg the tool to the selective position. If the subsurface control is to be stalled the upper most landg nipple, the lockg mandrel may be run with the keys the control or location position. In addition to settg the WC-LM-X Lockg Mandrel, the Runng Tool may be used to locate WC-LNP-X Landg Nipples. The R Le Selective Runng Tool, similar design, is also available a wide range of sizes to stall Type WC-LM-R Lockg Mandrels heavy weight tubg. C1 RUNNING TOOL MODEL: WC-C1 PRODUCT No.: WC The model WC-C1 runng tool runs flow Control devices to the well those have external fishg neck locks. A thread protector, which has the same OD as the tool body, makes selective settg possible. A seal bore locatg rg provides Top No go settg. The C1 runng tool has box-down connection to make up with A or N1 type shanks as required. Tubg Nipple Accessory Runng Locatg Top Thread Fish Shear P Seal Bore Tool Rg Connection Neck Diameter 2 1/16 2 3/8 2 7/8 3 1/2 4 1/2 OD / / / / / OD s OD 15/ /8 15/ /16 15/ /16 1 1/ /16 1 1/ /16

11 Drillg & Down-hole Completion Tools A SHANK MODEL: WC-A PRODUCT No.: WC A shank is used with the C1 runng tool to run lock mandrels to the well (keepg dogs retracted durg runng ). It can also be used as a probe carrier when probes are required durg runng operations. Shank Length Shank Accessory Standard Locks No-Go Locks Dogs Trailg Dogs Retracted Dogs Trailg 2 1/16 2.3/8 2.7/8 3.1/2 4.1/ /4 5 7/ / /16 6 3/ / / / N1 SHANK MODEL: WC-N1 PRODUCT No.: WC N1 shank is used conjunction with the C1 runng tool to run and land flow control equipments such as lock mandrels, blankg plugs, etc to landg nipples. Max. OD Top Bottom Length Connection Connection 2 3/ /4-16 1/ /8 2 7/ / /16

12 N1 PROBE MODEL: WC-N1-P PRODUCT No.: WC This probe is used to retrieve lock mandrels. It is used with standard pullg tools. Specification Guide: Max. OD Bottom Connection Length 2 3/ / /8 2 7/ / /16 Drillg & Down-hole Completion Tools A PROBE MODEL: WC-A-P PRODUCT No.: WC These probes are widely used runng, equalizg and pullg operations of various flow control devices. Accessory Probe Major OD Top Connection /16 7/ /2 1/ /2 1/ /8 5/ /8 5/8-11 B PROBE MODEL: WC-B-P PRODUCT No.: WC These are used with a standard pullg tools to retrieve lock mandrels. Lock Probe Length Top Bottom Connection Connection / /2 13 7/ / /2 13 1/ / /2 13 1/ / /8-11 5/ / /4-12 5/8-11

13 Drillg & Down-hole Completion Tools A GUIDE MODEL: WC-A-G PRODUCT No.: WC The Model WC-A-G Guide is basically a prong carrier. It centers and limits the probe penetration durg equalizg operations. The Guide is manufactured with vertical slots to allow fluid bypass when equalizg takg place. Accessory Guide Fish Neck Top Thread Connection Maximum Tool OD / / / / / / / / / / / / / / /16 SLIDING SLEEVES MODEL: WC-CMD [Down Shift] & WC-CMU [Up Shift] PRODUCT No.: WC & WC These slidg sleeves provide a means of communication between the tubg and annulus which could be opened and closed as per necessity. It has ternal honed seal bores located top and bottom housg for placement of flow control devices. The ternal sleeve is shifted to open or close by usg BO shiftg tool. CMD Slidg Sleeve is down-shift to open while CMU is beg shifted up for openg of the ports. CMD slidg sleeve can be converted to CMU type or vice-versa by changg the upper and lower subs. TUBING SEAL MAX. OD MIN. ID LENGTH SIZE BORE In 2 7/ / / / / /

14 Drillg & Down-hole Completion Tools L SLIDING SLEEVE MODEL: WC-L PRODUCT No.: WC The WELLCARE Model WC-L slidg sleeve is a downhole tool used to establish communication, when desired, between the tubg and annulus. Selective and or top No-Go lockg devices are available for use with the sleeve. It has Seal bores above and below the ports, and a top No-Go shoulder and lockg groove. The WC-L slidg sleeve locates seals and retas flow control accessories that have either top No-Go or selective locks. WELLCARE Model WC-L slidg sleeve is manufactured for standard H2S and H2S CO2 services. TUBING SLIDING SLEEVE SEAL BORE OD Couplg OD

15 Drillg & Down-hole Completion Tools SAFETY VALVE LANDING NIPPLE MODEL: WC-SVLNP PRODUCT No.: WC Safety Valve Landg Nipples are used to accommodate WELLCARE model Wirele retrievable sub surface safety valves. These nipples have a lockg recess and a hydraulic communication port located between the two polished bore. This nipple features an tegral control le connection port which operates sub surface safety valves. Tubg Landg Nipple Seal Bore Workg Pressure. mm. mm Psi 2 3/ / ½ , ,000 7, ,000 4 ½ ½ SEPARATION SLEEVE MODEL: WC-SSVS PRODUCT No.: WC WELLCARE Separation Sleeve, when attached to an appropriate lock is a wire-le retrievable tool, used to isolate the control le port of Safety Valve Landg Nipples.

16 SURFACE CONTROLLED SUBSURFACE SAFETY VALVES MODEL: WC-SSSV PRODUCT No.: WC Surface Controlled Subsurface Safety valves are stalled the upper wellbore to provide emergency closure of the producg conduits the events of an emergency. This safety valve system is designed to be fail safe, so that the wellbore is isolated the event of any system failure or damage to the surface production control facilities. WELLCARE model safety valve is a self equalizg, Wirele retrievable, surface controlled and flapper type. WELLCARE model Safety valve is stalled respective Landg Nipples. Features/Benefits: Self equalizg type Workg pressure up to 10,000 psi Sealg and sealg surfaces are out of flow path, when valve is the open position Solid construction of flapper made from bar stock. Specification Guide Landg Nipple Workg Tubg Valve ID Seal Bore Pressure. mm. mm In. Mm Psi Drillg & Down-hole Completion Tools 2 3/ / ½ ½ ,000 6,000 7,500 10, ½

17 Drillg & Down-hole Completion Tools TUBING RETRIEVABLE SAFETY VALVE MODEL: WC-TRSV PRODUCT No.: WC Tubg Retrievable Surface Controlled Sub Surface Safety Valves form part of production strg. Hydraulic control le extendg from the valve to the wellhead connects to a part on the outside of the valve. The opposite end of the control le the connects to the wellhead. Hydraulic pressure applied through this control le acts on hydraulic pistons with the valve. The force generated moves the flow tube down agast a power sprg and tubg pressure, causg the flapper to open. Matag this hydraulic pressure causes the flow tube to move up by the action of the closed position. Workg Tubg Max. OD M. ID Pressure mm mm mm PSI x X ,000 / 10,000 5,000

18 D2 SHIFTING TOOL Drillg & Down-hole Completion Tools MODEL: WC-D2 PRODUCT No.: WC The D2 shiftg tool is used to provide a safe, Selective and controlled method of openg and closg Model 'L' Slidg sleeve. Features / Benefits: Automatic Locatg Collet- Flags the operator when a sleeve is reached. It also dicates when the tool passes through a sleeve or nipple. Proof of Completed Shift- As soon as a shift-either Open or Close is completed, an attempt to repeat the operation will give a positive dication that the shift was performed. Safety Feature- If the sleeve is opened the presence of a differential pressure favor of the annulus, the release mechanism is held operative by the flow until the pressure is balanced to allow safe removal. Open and Close Sleeves one Trip- Run shiftg tools tandem if required to both open and close sleeves on the same run well. Run tool with collect up to open sleeves or with collect down (Inverted position) to close sleeves. Deliberate Release- Even after the shiftg tool is seated the sleeve; it can be released without shiftg the closg sleeve. Shiftg WC-L Slidg Fishg Tool Collet Top Thread Sleeve Neck Connection / / / / / / / / / / / / /

19 Drillg & Down-hole Completion Tools BO SHIFTING TOOL MODEL: WC-BO PRODUCT No.: WC The BO Shiftg Tool is used to move the ner sleeve to its open or closed position slidg sleeves circulatg devices. The shiftg tool engages the recess the upper (or lower) end of the ner sleeve to permit the sleeve to be shifted by a jarrg action. The tool is designed to release itself only after the sleeve reaches its fully open or closed position. This automatic-releasg feature corporates a releasg profile on the key itself that acts to compress the key sprg and release the positiong tool. A shear p is an added feature designed to release the tool the event well conditions make it impossible to shift the sleeve. SLIDING END SIDE FISH KEYS OD KEYS OD CONNECTION DOOR NECK EXPENDED RETRACTED LENGTH THREADS ID /16 10 UN /16 10 UN /16 10 UN /16 10 UN /16 10 UN /16 10 UN /16 10 UN /16 10 UN /16 10 UN /16 10 UN /16 10 UN /16 10 UN 13.88

20 Drillg & Down-hole Completion Tools LGE SEPARATION SLEEVE MODEL: WC-SS PRODUCT No.: WC This Separation Sleeve is a Top No-Go device which is run on wirele and designed to be landed and set the L Type slidg sleeve. These are equipped with two packg assemblies those seal the upper and lower seal bore of slidg sleeve, therefore isolatg the sleeve ports. Production can be mataed by producg the well through the side diameter of the tool. The separation Sleeve is also designed with an ternal equalizg plug to equalize pressure before retrievg. To Run To Equalize To Pull Seal Max OD Bore C1 N1 A A Pullg WC-N1-P Inches Inches Runng Shank Guide Probe Tool Tool Probe 2 3/8 2 7/8 3 1/2 4 1/ /8 2 3/8 1/ /8 2 7/8 1/ /2 3 1/2 5/ /2 4 1/2 5/8 40RB17 40SB1 JUC-TD15185 JDC-TD RB18 40SB2 JUC-TD15189 JDC-TD RB19 40SB9 JDC15181 JUC RB20 40SB10 JDC15183 JUC /8 2 7/8 3 1/2 4 1/2