Equalizing Check Valves
|
|
- Dwayne Anderson
- 6 years ago
- Views:
Transcription
1 qualizing heck Valves
2 WR- qualizing heck Valve (ottom ) Sizes. /. /. qualizing heck Valves are sometimes called Standing Valves allowing full fluid flow in the opposite direction (upward). The WR- seats on the bottom shoulder of a WR type profile which prevents downward movement. It is not locked into the profile, and has a built-in method of allowing equalizing before pulling. To Run: - Running Tool To Release: S or J Pulling Tool MTRIL SLTION / L0 M / hrome Moly,000 Yield 0,000 Yield in O-Ring # O-Ring / # y-pass Mandrel qualizing Sleeve rass Shear Screw O-Ring #
3 WR- qualizing heck Valve (ottom ) Sizes. /. qualizing heck Valves are sometimes called Standing Valves allowing full fluid flow in the opposite direction (upward). The WR- seats on the bottom shoulder of a WR type profile which prevents downward movement. It is not locked into the profile, and has a built-in method of allowing equalizing before pulling. To Run: - Running Tool To Release: S or J Pulling Tool MTRIL SLTION / L0 M / hrome Moly,000 Yield 0,000 Yield in O-Ring # O-Ring / # y-pass Mandrel qualizing Sleeve rass Shear Screw O-Ring #
4 WR- qualizing heck Valve (ottom ) Sizes. /. qualizing heck Valves are sometimes called Standing Valves allowing full fluid flow in the opposite direction (upward). The WR- seats on the bottom shoulder of a WR type profile which prevents downward movement. It is not locked into the profile, and has a built-in method of allowing equalizing before pulling. To Run: - Running Tool To Release: S or J Pulling Tool MTRIL SLTION / L0 M / hrome Moly,000 Yield 0,000 Yield in O-Ring # O-Ring / # y-pass Mandrel qualizing Sleeve rass Shear Screw O-Ring #
5 W- qualizing heck Valve (Top ) Sizes. /. /. qualizing heck Valves are sometimes called Standing Valves allowing full fluid flow in the opposite direction (upward). The W- seats on the top shoulder of a W type profile which prevents downward movement. It is not locked into the profile, and has a built-in method of allowing equalizing before pulling. To Run: - Running Tool To Release: S or J Pulling Tool MTRIL SLTION / L0 M / hrome Moly,000 Yield 0,000 Yield in O-Ring # O-Ring / # y-pass Mandrel qualizing Sleeve rass Shear Screw O-Ring # G G
6 W- qualizing heck Valve (Top ) Sizes. /. qualizing heck Valves are sometimes called Standing Valves allowing full fluid flow in the opposite direction (upward). The W- seats on the top shoulder of a W type profile which prevents downward movement. It is not locked into the profile, and has a built-in method of allowing equalizing before pulling. To Run: - Running Tool To Release: S or J Pulling Tool MTRIL SLTION / L0 M / hrome Moly,000 Yield 0,000 Yield in O-Ring # O-Ring / # y-pass Mandrel qualizing Sleeve rass Shear Screw O-Ring # G G
7 W- qualizing heck Valve (Top ) Sizes. /. qualizing heck Valves are sometimes called Standing Valves allowing full fluid flow in the opposite direction (upward). The W- seats on the top shoulder of a W type profile which prevents downward movement. It is not locked into the profile, and has a built-in method of allowing equalizing before pulling. To Run: - Running Tool To Release: S or J Pulling Tool MTRIL SLTION / L0 M / hrome Moly,000 Yield 0,000 Yield in O-Ring # O-Ring / # y-pass Mandrel qualizing Sleeve rass Shear Screw O-Ring # G G
Pump Assembly. 25 Ton Jack. Air Kit. Emerson PN. Hyd Kit. Emerson PN. Air Kit ITEM NO.
2 4 ITM NO. ir Hyd SRIPTION QTY. 2-0P Pump ody 2 2-02P Piston Spring 2-0P Piston ssembly 4 2-04P Piston O-Ring 2-0P ir Piston Rod O-Ring 6 2-06P ir Motor lock 7 2-07P ir Motor lock O-Ring 8 2-08P ir Motor
More informationModel A Sleeve Valve Cement Retainer
Ret. O.D. Model A Sleeve Valve Cement Retainer DIMENSIONAL DATA A B C D E F G H J K L M N P Q R 3.593 3.593 3.500 2.500 3.531 3.531 1.345 3.375.750.437 2.437 2.187 7.062 2.437 5.312 11.685 20.093 3.937
More informationDB Bridge Plug. Features. Benefits. Applications
DB Bridge Plug The WELLFIRST Premium Cast Iron Bridge Plug designed to run on electric line. Rated between 2000-10000-psi differential, and 300 F from above and below. Features Field Proven Design Constructed
More informationOn-Off Connector Skirt
On-Off Connector Skirt Retrievable Packers & Accessories The On-Off Connector Skirt is compact, reliable, fully sealing, J-type tubing disconnect device that automatically engages and releases with a small
More informationInstallation Instructions
Installation Instructions Eibach Springs, Inc. 264 Mariah Circle Corona, California 92879-1751 USA Tech Support 800-222-8811 Ext 114 PRO-UTV #E85-211-002-02-22 Please Note: The UTV kit includes front and
More informationSpecial Note: Single Pawl Spacer is required when using a Ratchet Pawl Assembly.
Line Overview The automatic spring-fed knives feature of this tool prevents excessive strain from being applied from the rig floor that could cause the knives to burn or break before the cut is completed.
More informationBolt. enmey Body Assembly. Bolt Sleeve. Bolt Stop. enmey TM PARTS GUIDE Rev 1.3 Page 2. OM7010 Bolt Tail O-rings
parts guide Bolt OM7010 Bolt Tail O-rings XTC309 Bolt Only lubricate with GR33SE TM paintball marker lubricant. enmey Body Assembly OM7017 Rear Breech O-ring OB7017 SFT O-ring Lightly grease O-ring Grease
More informationsil mla water meter valves
WTR SRIS QULITY Y TRITION sil mla water meter valves THNIL SHT 05/2017 IP09020 SOP SRVI ONITIONS SIL ML series are metallic ball valves manually operated that, due to their design are intended to be used
More informationInstallation Instructions RB 500 Motorized Roller Shades Motorized Roller Shade W/ Fascia Series-Motor Operation...
Installation Instructions RB 500 Motorized Roller Shades Motorized Roller Shade W/ Fascia 5-36 Series-Motor Operation... Installation Option: Leveller b a c Install the brackets (L or R marked inside)
More informationLOCK PROFILE SEAL BORE
BC LANDING NIPPLES BCS LANDING NIPPLE W/ PLUG IN PLACE ORIENTATION RING LOCK PROFILE SEAL BORE BC LANDING NIPPLE Landing Nipples are downhole completion accessories manufactured with an internal lock profile
More informationHydro-Mech Bridge Plug
Manual No: 0620000303 Revision: F Approved By: Quality Engineer Date: 2014-9-9 Hydro-Mech Bridge Plug DESCRIPTION: Map Hydro-Mech Bridge Plug is hydraulically actuated and mechanically set. Compact, with
More informationBall Valves. Stainless Steel Ball Valves Pag Pag Pag Pag Pag Pag. 9.
86300 Pag. 9.6 86310 Pag. 9.6 86320 Pag. 9.6 86330 Pag. 9.6 86700 Pag. 9.6 86710 Pag. 9.7 86720 Pag. 9.7 6300 Pag. 9.7 6310 Pag. 9.7 6400 Pag. 9.8 6410 Pag. 9.8 6560 Pag. 9.8 6570 Pag. 9.8 86900 Pag. 9.9
More informationPressure gauge with plastic case
Pressure gauge with plastic case Designed to monitor pressure in systems not subjected to vibrations. Suitable for all gaseous and liquid media that will not obstruct the pressure system or attack copper
More informationRetrievable Bridge Plugs
Retrievable Bridge Plugs & Associated Equipment Well Intervention omega-completion.com Our Philosophy High performance and integrity The Omega range of Retrievable Bridge Plugs and our accompanying suite
More informationDrawn up by: / RK Revision: 01 Reviewed: Page: 1 of 23 HI-SR 540 USA. Operating instruction SR 540 Face Shield
Page: 1 of 23 Operating instruction SR 540 Face Shield Page: 2 of 23 General information The SR 540 Face Shield can be used together with the SR 500 Powered Air-Purifying Respirator system of components
More informationPressure regulator for water
Pressure regulator for water rass version with VGW and international drinking water approvals Stainless steel version with VGW approval Compact plastic version Manometer port at pressure output The water
More informationTorque Specifications
SENR3130-10 Torque Specifications All Caterpillar Products S/N From the library of Barrington Diesel Club CONTENT General Information 01/07/2005 Introduction to Torque 01/07/2005 Torque-Turn 01/07/2005
More informationHow to Order RM0 0 Z. IN/OUT fitting type Metric size Inch size Straight Elbow Straight Elbow Straight Elbow Straight Elbow ø ø ø ø ø ø ø ø ø/ ø/ ø/ ø
Series RM/ End lock RME Port Plug End block End block type Mounting position L Left side R Right side L side end block 0. L VVQ0000 Single unit regulator / Port plug for regulator block ø0 0 Options Note
More informationSATURNSERIES INTERCHANGE > ISO (for the couplings)
NTERHANE > (for the couplings) TEHNAL FEATURES AND OPTONS nterchange (for the couplings) Sealing description Nitrile NR onnection system Push Available sizes Material /treatment Available threads from
More informationPRESSURE SEQUENCE VALVE TYPE UZK
PRESSURE SEQUENCE VALVE TYPE UZK Size 10, 20, 30 31,5 MPa up to 450 dm 3 /min WK 450 414 04. 2000r. Pressure sequence valves type UZK are used for switching a system or part of a system off when a set
More informationTHE BP-690 SERIES. Operating and Service Manual. Series includes all variants of BP-LF/MF-690/691
THE BP-690 SERIES Operating and Service Manual Series includes all variants of BP-LF/MF-690/691 Issue B April 2015 1 TABLE OF CONTENTS 1. Description... 3 2. Installation... 3 3. Operation... 4 4. Special
More informationGenesis, and T10 Tools
Avseal II Nose Assembly Instructions Genesis, 07220 and T10 Tools Safety Rules This technical datasheet must be read with particular attention to the safety rules and operating instructions listed in the
More informationSmooth Vent Valve. Series XVD XL XL Q D- XVD XGT CYV
Smooth Vent Valve Series Valve / needle valve integrated construction requires only 1/4 the piping space of previous models. Particulates significantly reduced through the use of a metal diaphragm in the
More informationFLOW CONTROL VALVES FLOW CONTROL VALVE HF WITH PRESSURE COMPENSATION SIZE 01 E 4. Description of the model designation. Outside dimensions
FLOW CONTROL VALV HF WITH PRSSUR COMPNSATION SIZ it incorporates a pressure compensation mechanism, the flow is kept constant even if the pressure varies at the and/or port. When equipped with a check
More informationnile va25 valve WATER SERIES SCOPE SERVICE CONDITIONS COMPONENTS TECHNICAL SHEET 08/2012 IP19010 PAG. 1/6
WER SERIES QULIY Y RDIION nile va25 valve EHNIL SHEE 08/2012 IP19010 SOPE SERVIE ONDIIONS NILE series are manually operated metallic ball valves, by its design and raw materials are intended to be used
More informationPoollift Delphin. Version: February, 2015 MANUAL AND OPERATING INSTRUCTIONS
Poollift Delphin Version: February, 2015 MANUAL AND OPERATING INSTRUCTIONS Content 1. Introduction... 3 2. Technical Specifications... 3 Used materials... 3 3. Installation Instructions... 4 Fastening
More informationIP2M, IP2AM and IP2DM Monnier International Compressed Air Filter/ Regulators
L ocal regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification
More informationVK/VP SERIES : Sealless Vertical Pump. Assembling Instructions 2010
VK/VP SERIES : Sealless Vertical Pump Assembling Instructions 2010 20610 Manhattan Place Suite 116 Torrance, CA 90501 Phone: 310-328-9114 Fax: 310-328-9441 1. Motor Shaft and Pump Base (1) (2) Place a
More informationPart # Balanced SCUBA Regulator Assembly for M-48 SuperMask and MOD-1 Installation Guide
KIRBY MORGAN Kirby Morgan Dive Systems, Inc. Part #200-125 Balanced SCUBA Regulator Assembly for M-48 SuperMask and MOD-1 Installation Guide Part Number Description Qty 200-120 Balanced SCUBA Regulator
More informationInstallation Manual. Version 12-10
Installation Manual The products and parts shown herein are to be installed and used adjusted in accordance with these instructions. Any deviation by the buyer, installer, or user from these instructions
More informationSmooth Vent Valve XVD. Series
Smooth Vent Valve Series Valve / needle valve integrated construction requires only 1/4 the piping space of previous models. Particulates significantly reduced through the use of a metal diaphragm in the
More informationSO 9001 I ACCESSORIES
ISO 9001 ESSORIES ESSORIES INDEX Page In-Line Mounted Flow ontrol Valves 3 In-Line Mounted heck Valves 3 Quick Exhaust, heck and Shuttle Valves In-Line Ported Lockout Valves 5 Mufflers 6 Fittings 7-9 2
More informationMUELLER GAS. No-Blo Operations Using D-5. Drilling Machine. Reliable Connections. General Information 2
operating Instructions manual MUELLER GAS TAble of contents PAGE No-Blo Operations Using D-5 General Information 2 Installing No-Blo Service Tees, Service Stop Tees and Curb Stop Tees 3-8 Reconditioning
More informationSmooth Vent Valve. XVD Series
Smooth Vent Valve Series Valve / needle valve integrated construction requires only 1/4 the piping space of previous models. Particulates significantly reduced through the use of a metal diaphragm in the
More informationBR 27g. Operating, assembly and maintenance instructions for discontinuous sampling valve. 1. Design, operation and dimensions:
Operating, assembly and maintenance instructions for discontinuous sampling valve BR 27g The equipment may only be dismounted and disasembled by skilled staff, who are familiar with the assembly, start-up,
More informationBasic Movement Patterns Locomotor Skills 1.3
Basic Movement Patterns Locomotor Skills 1.3 Jumping Forward & Sideways & Landing Extending Arms upward upon takeoff Arms Reach Full Extension about head height at lift off Extending the Hips, Knees, and
More informationPressure reducing valve, direct operated, sandwich plate, type ZDR6D...40B/(New Series)
Pressure reducing valve, direct operated, sandwich plate, type ZDR6D...40B/(New Series) Huade América 1 BEIJING HUADE HYDRAULIC INDUSTRIAL GROUP CO.,LTD. Pressure reducing valve, direct operated, sandwich
More informationVBGx-xx-xx Externally Threaded Control Ball Valves PN25 (DN15 TO DN32)
VGx-xx-xx Externally Threaded Control all Valves PN25 (DN15 TO DN32) PPLICTION The VG2 2-Way and VG3 3-Way Control all Valves control hot and chilled water with glycol solutions up to 50% according to
More informationmiño 2000 valve GAS SERIES SCOPE SERVICE CONDITIONS TECHNICAL SHEET 06/2015 IP10010 PAG. 1/6
GS SRIS miño 2000 valve THNIL SHT 06/2015 IP10010 SOP MIÑO series are manually operated metallic ball valves. The valves can not be dismantle, avoiding tampering of components in contact with gas, and
More informationSV5 Safety Valve Installation and Maintenance Instructions
3120036/3 IM-S13-12 CH Issue 3 SV5 Safety Valve Installation and Maintenance Instructions 1. General specification 2. Supply 3. Before fitting the valve 4. Installation 5. Damage prevention 6. Commissioning
More informationVBGx-xx-xx Externally Threaded Control Ball Valves PN25 (DN15 TO DN32)
VGx-xx-xx Externally Threaded Control all Valves PN25 (DN15 TO DN32) PPLICTION The VG2 2-Way and VG3 3-Way Control all Valves control hot and chilled water with glycol solutions up to 50% according to
More informationBridge Plugs, Ball Drop & Caged Ball Plugs For Zone Isolation
Bridge Plugs, Ball Drop & Caged Ball Plugs For Zone Isolation ADVANTAGE composite bridge plug, caged ball and ball drop (flow thru) frac plug provide a means to isolate multiple zones during high pressure
More informationRS(H)20, 25 USER MANUAL
RS(H)20, 25 USER MANUAL Read the complete manual before installing and using the regulator. WARNING Before removing a regulator from the system for service, you must depressurize system purge the system
More informationROTATING DISK VALVES INSTALLATION AND MAINTENANCE 1. SCOPE 3 2. INFORMATION ON USAGE 3 3. VALVE TYPES 3 4. OPERATORS 5 5. VALVE CONSTRUCTION 6
Sub Section INDEX Page Number 1. SCOPE 3 2. INFORMATION ON USAGE 3 3. VALVE TYPES 3 4. OPERATORS 5 5. VALVE CONSTRUCTION 6 6. INSTALLATION AND OPERATION 6 7. MAINTENANCE 8 8. REPAIR 9 9. ASSEMBLY 10 10.
More informationPOP Safety Valve. POP Safety Valve INTRODUCTION DEFINITIONS
POP Safety Valve POP Safety Valve INTRODUCTION The effects of exceeding safe pressure levels in an unprotected pressure vessel or system, can have catastrophic effects on both plant and personnel. Safety
More informationLEAK TROUBLESHOOTING
LEAK TROUBLESHOOTING If you suspect that your TMC isolation system is leaking (most often evidenced by going through air/nitrogen tanks too quickly), this guide will help you to find and fix the problem.
More information4400 TwinHybrid Gas Seal
4400 TwinHybrid Gas Seal EQUIPMENT PREPARATION MECHANICAL SEAL INSTALLATION INSTRUCTIONS 1 2 200.005" 0,13 mm 125 µ" 3,2 µm R a 3 4 32 µ" 0,8 µm R a 1000 ±.002" 0,05mm CAUTIONS These instructions are general
More informationHigh Pressure Check Valves
High Pressure heck Valves Pressures to 60,000 psi (4137 bar) O-Ring heck Valves Minimum operating temperature for standard o-ring check valves 0 F (-17.8 ). For low temperature option to -423 F (-252 )
More informationACCREDITED H series Inclined pressure reducing valve sizes DN 15 (1/2 ) and DN 20 (3/4 )
Inclined pressure reducing valves 533..H series RIT ISO 91 FM LFFI /17 G replaces / G Function Pressure reducing valves are installed in residential water systems to reduce and stabilise inlet pressure
More informationThule RideAlong Mini Front Child Bike Seat
Congratulations on your purchase of the Thule RideAlong Mini front child bike seat. This is a premium product with every detail carefully designed for high safety and easy use. We wish you and your child
More informationDirectional Valves. Hydraulic Operated Directional Valves
Service Data Vickers Directional Valves Hydraulic Operated Directional Valves (F*) DG3V 8 (B) ** (L) (X) (*) (*) 10 (EN**) Released 04/96 5007.03/EN/0496/S DG3V-8-*(C) - (X) - 10 Spring Centered 473726
More informationCALEFFI. Reduced pressure zone backflow preventer. 574 series 01022/18 NA D E C F B D E. Function
Reduced pressure zone backflow preventer series LEFFI 01022/18 N REITE ISO 9001 FM 216 ISO 9001 No. 000 Function The backflow preventer can be used in all plumbing systems where there is danger of the
More informationDIVE RESCUE INTERNATIONAL, INC. Divator MKII Parts Price List
DIVE RESCUE INTERNATIONAL, INC. Divator MKII Parts Price List KEY: Please Note: Prices Subject to Change Without Notice PP= Positive Pressure or with Safety Pressure NPP = Non Positive Pressure or w/o
More informationHATFIELD. Continuing the Tradition SEMI-AUTOMATIC SHOTGUN INSTRUCTION MANUAL
HATFIELD Continuing the Tradition SEMI-AUTOMATIC SHOTGUN INSTRUCTION MANUAL READ THE INSTRUCTIONS AND WARNINGS IN THIS MANUAL CAREFULLY BEFORE USING THIS FIREARM SAFETY HANDLING RULES 1.Always keep the
More informationSeries ACG/ARG/AWG. Regulator with Built-in Pressure Gauge Filter Regulator with Built-in Pressure Gauge
Regulator with uilt-in ressure auge ilter Regulator with uilt-in ressure auge Series /R/W - - - R- L- W- R L W V Visibility of pressure gauge is improved in various installation places When mounting on
More informationAPT14, APT14HC and APT14SHC Spares 2
6120251/7 IM-P612-06 ST Issue 7 APT14, APT14HC and APT14SHC Spares 2 Installation and Maintenance Instructions 1. Safety information 2. Replacement of trap and outlet check valve mechanism 3. Replacement
More informationBulletin 2533-M3/USA Service Bulletin. Series PR25MA, PR25P, PR25S, PR32P, PR32S. Effective: July 1, Pilot Operated Pressure Reducing Valves
Service Bulletin Series PR25MA, PR25P, PR25S, PR32P, PR32S Effective: July 1, 1995 Pilot Operated Pressure Reducing Valves WARNING FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS
More informationCALEFFI. Inclined pressure reducing valves series 01024/17 GB. replaces 01024/14 GB
Inclined pressure reducing valves 533 series RIT ISO 91 FM 15 LFFI /17 G replaces /1 G Function Pressure reducing valves are installed in residential water system to reduce and stabilise inlet pressure
More informationMounting and operating instructions EB 2530 EN. Self-operated Pressure Regulator. Pressure Reducing Valve Type M 44-2
Self-operated Pressure Regulator Pressure Reducing Valve Type M 44-2 Type M 44-2, connection G 1 4, K VS = 0.15 Type M 44-2, connection G 1, K VS = 6 Fig. 1 Type M 44-2 Pressure Reducing Valve Mounting
More informationHORNE 20 THERMOSTATIC MIXING VALVE TYPE H-2003
PO Box 7, Rankine Street Johnstone, Renfrewshire Scotland. PA5 8BD Tel: 01505 321 455 Fax: 01505 336 287 Email: technical@horne.co.uk Web: www.horne.co.uk HORNE 20 THERMOSTATIC MIXING VALVE TYPE H-2003
More informationPilot operated pressure relief valve sandwich plate,type ZDB/Z2DB6 Huade América 1
Pilot operated pressure relief valve sandwich plate,type ZDB/Z2DB6 Huade América 1 BEIJING HUADE HYDRAULIC INDUSTRIAL GROUP CO.,LTD. Pilot operated pressure relief valve sandwich plate,type ZDB/Z2DB6 Size
More informationModulating liquid level regulators, direct-controlled, type SV 1 and 3 REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Modulating liquid level regulators, direct-controlled, type SV 1 and 3 REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction...3 Technical data...3 Approvals...3 Identification...3
More informationAssembly instructions nortik scubi 2 Recreational kayak
Assembly instructions nortik scubi 2 Recreational kayak QR-Code assembly video: Assembly instructions nortik scubi 2 Dear Customer, You have purchased a nortik scubi 2, an innovative hybrid kayak for recreational
More informationDouble Pilot Operated Cartridge Check Valve, Size 8
Double Pilot Operated Cartridge Check Valve, Size 8 Q max = 7 l/min (19 gpm), p max = 35 bar (5 psi) pilot operated, two-stage, spring-closed cartridge-type poppet valve Compact design for cavity type
More informationFloat valves Types SV 1 and SV 3
Data sheet Float valves s SV 1 and SV 3 The SV 1 and 3 can be used separately as a modulating liquid level regulator in refrigerating, freezing and air conditioning systems for ammonia or fluorinated refrigerants.
More information1.0 - OPENING AND CLOSING THE DOOR
The purpose of this manual is to provide the user with instructions on how to safely open and close, how to conduct routine maintenance, and how to install the PEI TWINLOCK Closure on a pressure vessel.
More informationCA16 and CA16S-14 Air and Gas trap Installation and Maintenance Instructions
1483250/3 IM-P148-10 ST Issue 3 CA16 and CA16S-14 Air and Gas trap Installation and Maintenance Instructions 1 General safety information CA16 and CA16S-14 ½" and ¾" 2 General product information 3 Installation
More informationExcess Flow Valves. General Information. How They Work. An Explanation and Warning. Proper Installation
xcess low Valves General Information RegO xcess low Valves have been designed, developed, and manufactured for a wide variety of industry needs for more than three decades. Throughout the years, those
More informationCASH VALVE TYPE KP BACK PRESSURE VALVES
A high capacity pilot operated back pressure valve that offers accurate control and dependable protection against overpressure conditions FEATURES Automatically maintains maximum pressure in a vessel or
More informationBIOPAK 240R MAINTENANCE TOOL KIT. TOOL KIT PART NUMBER: B Revision A
BIOPAK 240R MAINTENANCE TOOL KIT User Manual TOOL KIT PART NUMBER: B6 02 5003 79 0 Revision A Contents Subject Page About the Maintenance Tool Kit 1 Description of the Maintenance Tool Kit 2 Various Test
More informationPressure reducing valves
Pressure reducing valves series 60-6 - 6-66 cert. n 000 ISO 9001 06/01 G Replaces 06/97 G Function Pressure reducers are devices which, when installed on a water system, reduce and stabilise the pressure
More informationAcoustic Techniques to Monitor and Troubleshoot Gas-lift Wells
37 th Gas-Lift Workshop Houston, Texas, USA February 3 7, 2014 Acoustic Techniques to Monitor and Troubleshoot Gas-lift Wells Carrie-Anne Taylor, Engineer Lynn Rowlan, Engineer Echometer Company Feb. 3-7,
More information! WARNING! IMPORTANT HPA AIR TANK SAFETY INSTRUCTION AND GUIDELINES ! WARNING! IMPORTANT SAFETY INSTRUCTION AND GUIDELINES
! WARNING! IMPORTANT SAFETY INSTRUCTION AND GUIDELINES! WARNING! IMPORTANT HPA AIR TANK SAFETY INSTRUCTION AND GUIDELINES This Paintball Marker is NOT A TOY. Misuse can cause serious injury or death. It
More informationBasic Pneumatics. Module 9: Time delay valve. Academic Services PREPARED BY. April 2012
Basic Pneumatics PREPARED BY Academic Services April 2012 Applied Technology High Schools, 2012 Module Objectives After the completion of this module, the student will be able to: Demonstrate an understanding
More informationBTV. Internally threaded 2-way control valve. Flow characteristics. Function
Internally threaded 2-way control valve The valves are designed for control of hot, cold or glycol-mixed water in heating and ventilation systems. They are pressure balanced (from DN20-50, not DN15) and
More informationSandwich Valves. 1 Change in flow, temperature or fluid (SSU) rating will affect valve
Technical Information Series PRM General Description Series PRM reducing valves are used to regulate pressure, in one area of a circuit, below normal system pressure. This style valve is well suited to
More informationVARIABLE SLIPPAGE PUMP
VARIABLE SLIPPAGE PUMP Dover Artificial Lift, part of Dover Energy, is a team of industry-leading companies that utilize their collective resources to help oil & gas producers optimize revenues, profitability,
More informationDrilling & Down-hole Completion Tools
BLANKING PLUGS MODEL: WC-BPL-X [Go] & WC-BPL-XN [No-Go] PRODUCT No.: WC-41403 & WC-41409 These are wirele operated combation tool of Lock mandrel, Equalizg prong and Equalizg sub, set respective landg
More informationAdjustment of SF6 pressure
General FBX is a pressurised, sealed unit device in accordance with IEC62271-1. It therefore does not require any periodic refilling. Any abnormal drop in pressure must be subject to corrective maintenance.
More informationSpare parts list ( ) Spare parts list HD 2.3/14 C Ed Food
Spare parts list (5.972-564.0) Spare parts list HD 2.3/14 C Ed Food 05.08.2013 www.kaercher.com EN Page 2 Page 3 Page 4 Table of contents Spare parts list HD 2.3/14 C Ed Food (5.972-564.0)... 6 10 Housing
More informationRHPS Series RD(H)F40 User Manual. Read the complete manual before installing and using the regulator.
RHPS Series RD(H)F40 User Manual Read the complete manual before installing and using the regulator. 2 WARNING Before removing a regulator from the system for service, you must depressurize system purge
More informationSTAINLESS STEEL LOW PRESSURE REDUCING VALVE LPRV ELITE
MAIN CHARACTERISTICS The stainless steel LPRV elite low pressure reducer is intended for the pressure reduction of the fluids such as water, air, clear liquids not in charge of and the compatible gases
More informationRegulator. Modular Type AR10 AR20 AR25 AR30 AR40 AR40-06 AR50 AR60. Pages 36 through 40 AR20K AR25K AR30K AR40K AR40K-06 AR50K AR60K
Modular Type Regulator Series R Regulator Series R Model R M5 x.8 ccessory R2 /8, /4 R /4, 3/8 R3 /4, 3/8 R4 /4, 3/8, /2 Pages 36 through 4 Regulator with back flow mechanism Series RK R4-6 R5 R6 R2K RK
More informationSTAD-D. Balancing valves Balancing valve for domestic water systems, DN Balancing valves
STAD-D Balancing valves Balancing valve for domestic water systems, DN 15-50 Balancing valves IMI TA / Balancing valves / STAD-D STAD-D The STAD-D balancing valve delivers accurate hydronic performance
More informationRegulator. Modular Type AR10 AR20 AR25 AR30 AR40 AR40-06 AR50 AR60. Pages 36 through 40 AR20K AR25K AR30K AR40K AR40K-06 AR50K AR60K
Modular Type Regulator Series R Regulator Series R Model R M5 x.8 ccessory R2 /8, /4 R /4, 3/8 R3 /4, 3/8 R4 /4, 3/8, /2 Pages 36 through 4 Regulator with back flow mechanism Series RK R4-6 R5 R6 R2K RK,
More informationNorth American sealing solutions Bridge Plug Ball Drop Frac Plug Caged Ball Frac Plug
North American sealing solutions Bridge Plug Ball Drop Frac Plug Caged Ball Frac Plug The North American Sealing Solutions composite bridge plug, caged ball and ball drop (flow thru) frac plug provide
More informationFilling valves AL, ALM Series Automatic filling units ALOMDIW, ALOMDNW Series
Filling valves AL, ALM Series Automatic filling units ALOMDIW, ALOMDNW Series Main features Designed for automatic filling of sealed heating systems and for protection of the water mains from risk of contamination.
More informationFit Testing. C50 APR New Equipment Training Module March 2010 Rev01
Fit Testing Once all three steps are complete, the mask must be fit tested. This is done using the TSI Portacount Test System Before either of the tests begin, the mask must be set up properly. Fit and
More informationMix and Flow of Matter Unit Test. For each of the following hazardous products match the correct WHMIS symbol
/40 Student Name Class Section 1.1 WHMIS For each of the following hazardous products match the correct WHMIS symbol 1 Flammable A. 2 Corrosive B. 3 Dangerously Reactive C. Section 1.2 The Many Uses of
More informationIWCF Equipment Sample Questions (Surface Stack)
IWCF Equipment Sample Questions (Surface Stack) 1. During a well control operation 4000 psi was shut in below the middle pipe rams. Ram type BOP data: Model: Cameron U type Rated Working Pressure: 15000
More informationOFI Testing Equipment - Aging Cell Instructions Page 1 of 4. Instructions OFITE AGING CELLS
OFI Testing Equipment - Aging Cell Instructions Page 1 of 4 Instructions OFITE AGING CELLS The OFITE Aging Cell is a patented pressure vessel that enables samples to be subjected to temperatures higher
More informationMounting and Operating Instructions EB 8546 EN. Supply Pressure Regulator Type Fig. 1 Supply pressure regulators
Supply Pressure Regulator Type 4708 Type 4708-5352 on Type 3730 Positioner Type 4708-52 with filter receptacle Type 4708-6252 on Type 3372 ctuator Fig. Supply pressure regulators Mounting and Operating
More informationBRV71 and BRV73 Pressure Reducing Valves
2103050/4 IM-P210-04 CH Issue 4 BRV71 and BRV73 Pressure Reducing Valves Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation 4. Start-up and adjustment
More informationFloat valves Types SV 4, SV 5 and SV 6
Data sheet Float valves Types SV 4, SV 5 and SV 6 SV 4-6 are for use on the low pressure side as modulating liquid level regulators in refrigeration, freezing and air conditioning systems with ammonia
More informationW I L D W E L L C O N T R O L COMPLETIONS AND WORKOVERS
COMPLETIONS AND WORKOVERS Completions & Workovers Learning Objectives You will learn - The reasons why a well needs to be worked over. The benefits derived from working a well over. To prepare a well completion.
More informationWHEATLEY WHEATLEY SERIES 500 SWING CHECK VALVE. Installation, Operation and Maintenance Manual
WHEATLEY SERIES 500 SWING CHECK VALVE STANDARD INTEGRAL SEAT & OPTIONAL REMOVABLE SEAT 2" FP - 6" FP 150# - 1500# 8" FP - 12" FP 150# - 900# API 6D and B16.34 2" FP - 4" FP 5000# DRILLING PRODUCTION VALVE
More informationDiscontinued. Powers Controls. Technical Instructions Document No P25 RV Rev. 1, May, RV 201 Pressure Reducing Valves.
Powers Controls RV 201 Pressure Reducing Valves Description Features Product Numbers Dual Pressure PRV Technical Instructions Document No. 155-049P25 RV 201-1 Single Pressure PRV The RV 201 Pressure Reducing
More informationTypical Piping Layouts for PREMIX Blower Mixer Systems
PREMIX Blower s Page 3103 Block & Bleed system is frequently required by insurance authorities. Typical Piping Layouts for PREMIX Blower Systems Maxon assumes no responsibility for the use or misuse of
More informationSpare parts list. ( ) Spare parts list HD 3.0/20 C Ea
Spare parts list (5.972-551.0) Spare parts list HD 3.0/20 C Ea 24.06.2016 www.kaercher.com EN Page 2 / 51 Page 3 / 51 Page 4 / 51 Table of contents Order instructions Spare parts list HD 3.0/20 C Ea (5.972-551.0)
More informationCameron MBS Multi-Bowl Wellhead System
Cameron MBS Multi-Bowl Wellhead System MBS Multi-Bowl Wellhead System Tubing Head Adapter Tubing Hanger Upper Casing Spool Pack-off Bushing Emergency Slip and Seal Assembly Lower Casing Head Standard MBS
More information