UNITED E-X-T-E-N-D-E-D Range
|
|
- Mabel Sanders
- 5 years ago
- Views:
Transcription
1 UNITED E-X-T-E-N-D-E-D Range Drill Jig Bushings For Heavy Duty Applications requiring Bushings of standardized dimensions larger than those provided by the A.N.S.I. standard Bushings. LOCK SCREWS and ROUND CLAMPS USED WITH SF and SFX P-PU HEADLESS PRESS FIT H-HU HEAD PRESS FIT SF SLIP-FIXED SFX SLIP RENEWABLE LS LOCK SCREW RC 1-5 ROUND CLAMP HL-HLU HEAD LINER L-LU LINER ALL BUSHINGS SHOWN ARE IN THIS SECTION STANDARD SIZES: All HARDNESS: Rockwell RC in the hole. CONCENTRICITY: Finished Ground Press Fit Bushings are held to a concentricity of.0005 T.I. R. LEAD: All Finished Ground Bushings feature a concentric O.D. Tolerances of to Manufactured as ordered from semi-finished. RANGE BUSHINGS ARE NOT ORDERING EXAMPLE: 4 P /8 (3.3750) Specify: QUANTITY 4 BUSHING TYPE Press Fit P O.D. 4-1/2 288 LENGTH 3" 48 I.D. TO 4 DECIMAL PLACES 3-3/8" 3.375O WOODRUFF AVE. DOWNEY, CA TELEPHONE (562) / (800) IN CA / FAX (562) /(800)
2 P - PU Headless Press Fit Bushings STANDARD SIZES: All CONCENTRICITY: LEAD: All Finished Ground RANGE BUSHINGS ARE NOT Headless Press Fit P and PU BIG TOUGH SPECIFY 'P' FOR GROUND SPECIFY 'PU' FOR UNGROUND O.D. Tolerances of to A I.D. RANGE B O.D. SIZE C FRACTIONAL LENGTH / ANSI LENGTH SYMBOL BY 16ths UNITED s Highly Popular and Practical Bushings! Headless Press Fit METRIC REF. ONLY NOM. / METRIC DECIMAL FROM - TO FROM - TO NOM. MAX - MIN SYMBOL / P /2-2-1/ P /2-2-3/ P MM MM /4-2-1/ MM MM " P /4-2-3/ P /4-2-7/ P MM MM / P /2-3-1/ P /4-3-3/ MM MM " P / P MM MM / P MM MM /8-3-7/ P MM MM /8-4-1/ P MM MM /8-4-1/ MM MM " P
3 A I.D. RANGE B O.D. SIZE C FRACTIONAL LENGTH UNDER HEAD / ANSI LENGTH SYMBOL BY 16ths METRIC REF. ONLY TECHNICAL NOM. / METRIC DECIMAL FROM - TO FROM - TO NOM. MAX - MIN SYMBOL F G 1-1/ / H /4 3/8 1-1/2-2-1/ / H /4 3/8 1-1/2-2-3/ / H " 3/ MM MM /4-2-1/ " H /4 3/ MM MM /4-2-3/ / H /2 3/8 2-1/ MM - 2-1/ MM - 2-1/ MM - 2-3/ MM MM - H - HU Head Press Fit Bushings 2-7/ MM MM / MM / MM / MM STANDARD SIZES: All CONCENTRICITY: LEAD: All Finished Ground RANGE BUSHINGS ARE NOT Head Press Fit H and HU BIG TOUGH SPECIFY 'H' FOR GROUND SPECIFY 'HU' FOR UNGROUND O.D. Tolerances of to Head Press Fit / H /8 3/ / H /8 1/2 3-3/ H /8 1/ " H /8 1/ / H /8 1/ / MM MM /4 1/2 3-3/8-3-7/ MM MM /8 1/2 3-3/8-4-1/ MM MM /8 1/2 3-5/8-4-1/ MM MM " H /8 1/ WOODRUFF AVE. DOWNEY, CA TELEPHONE (562) / (800) IN CA / FAX (562) /(800)
4 SF Slip Fit Renewable Bushings UNITED s Highly Popular and Practical Bushings! SF Slip Fit STANDARD SIZES: All Slip Fit Renewable CONCENTRICITY: SF BIG TOUGH SPECIFY 'SF' FOR LEAD: All Finished Ground SLIP FIT RENEWABLE RANGE BUSHINGS ARE NOT SEE THIS SECTION FOR TECHNICAL DATA. A I.D. RANGE B O.D. SIZE C FRACTIONAL LENGTH UNDER HEAD / ANSI LENGTH SYMBOL BY 16ths METRIC REF. ONLY NOM. / METRIC DECIMAL FROM - TO FROM - TO NOM. MAX - MIN SYMBOL / / MM MM " SF /2-2-1/ SF /2-2-9/ SF MM MM /4-2-17/ MM MM " SF /4-2-5/ SF /4-2-7/ SF MM MM /8-2-7/ SF MM MM /2-3-1/ SF /4-3-1/ MM MM " SF / SF MM MM / SF MM MM /8-3-3/ SF MM MM /8-4" SF MM MM /8-4-1/ MM MM " SF
5 Milled Flat Slip Fit Bushings STANDARD SIZES: All CONCENTRICITY: LEAD: All Finished Ground RANGE BUSHINGS ARE NOT Milled Flat Slip Fit SFX SPECIFY 'SFX' FOR MILLED FLAT SLIP FIT SEE NEXT PAGE FOR TECHNICAL DATA. SEE FOLLOWING PAGES FOR HL and L LINERS. Milled Flat Slip Fit A I.D. RANGE B O.D. SIZE C FRACTIONAL LENGTH UNDER HEAD / ANSI LENGTH SYMBOL BY 16ths METRIC REF. ONLY NOM. / METRIC FROM - TO FROM - TO NOM. MAX - MIN SYMBOL / / MM MM " SFX /2-2-1/ SFX /2-2-9/ SFX MM MM /4-2-17/ MM MM " SFX /4-2-5/ SFX /4-2-7/ SFX MM MM /8-2-7/ SFX MM MM /2-3-1/ SFX /4-3-1/ MM MM " SFX / SFX MM MM / SFX MM MM /8-3-3/ SFX MM MM /8-4" SFX MM MM /8-4-1/ MM MM " SFX WOODRUFF AVE. DOWNEY, CA TELEPHONE (562) / (800) IN CA / FAX (562) /(800)
6 E-X-T-E-N-D-E-D Range Slip Fit Renewable Technical Data SF and SFX Slip Fit See Bushing Pages for Lock Screws and Clamps. LOCK SCREW ROUND CLAMP SF SFX PATENT # 3,606,566 See Bushing Pages for Lock Screws and Clamps. See following Pages for HL and L Liners. ROUND END CLAMP FLAT CLAMP A I.D. RANGE B O.D. SIZE SELECT TECHNICAL DATA FOR SF AND SFX RANGE ROUND SFX ONLY METRIC: REFERENCE ONLY NOM. / METRIC DECIMAL A N S I LOCK ROUND END FLAT FROM - TO FROM - TO NOM. MAX - MIN SYMBOL F G H J K L Y N R SCREWS CLAMPS CLAMPS CLAMPS 1-3/ / " SF /16 3/8 3/16 1-1/8 1" / / /64 LS-3 RC-3 R-3, R-14 F-3, F-14, F MM MM /2-2-1/ / SF /16 3/8 3/16 1-3/8 1-1/ / / /64 LS-3 RC-3 R-3, R-14 F-3, F-14, F /2-2-9/ / SF /16 7/16 7/ /64 1-3/ /4 2-3/ /16 LS-4 RC-4 R-4, R-15 F-4, F-5, F-16, F MM MM /4-2-17/ " SF /16 7/16 7/ /64 1-1/ /8 2-5/16 2-1/16 LS-4 RC-4 R-4, R-15 F-4, F-5, F-16, F MM MM /4-2-5/ / SF /16 7/16 7/ /64 1-5/ /2 2-7/16 2-3/16 LS-4 RC-4 R-4, R-15 F-4, F-5, F-16, F /4-2-7/ / SF /16 7/16 7/ / / /16 2-1/2 2-1/4 LS-4 RC-4 R-4, R-15 F-4, F-5, F-16, F MM MM /8-2-7/ / SF /16 7/16 7/ /64 1-3/ /8 2-9/16 2-5/16 LS-4 RC-4 R-4, R-15 F-4, F-5, F-16, F MM MM /2-3-1/ / SF /16 7/16 7/32 2-7/64 1-7/ / /16 2-1/2 LS-4 RC-4 R-4, R-16 F-4, F-5, F-18, F /4-3-1/ " SF /16 1/2 1/4 2-15/64 2" / /16 2-5/8 LS-5 RC-5 R-5, R-17 F-6, F-7, F-20, F MM MM / / SF /16 1/2 1/4 2-23/64 2-1/ /16 3-1/16 2-3/4 LS-5 RC-5 R-5, R-17 F-6, F-7, F-20, F MM MM / / SF /16 1/2 1/4 2-27/64 2-3/ /8 3" 2-13/16 LS-5 RC-5 R-5, R-17 F-6, F-7, F-20, F MM MM /8-3-3/ / SF /16 1/2 1/4 2-31/64 2-1/ /16 3-1/16 2-7/8 LS-5 RC-5 R-5, R-17 F-6, F-7, F-20, F MM MM /8-4" / SF /16 1/2 1/4 2-39/64 2-3/ /16 3-3/16 3" LS-5 RC-5 R-5, R-17 F-6, F-7, F-20, F MM MM /8-4-1/ " SF /16 1/2 1/4 2-47/64 2-1/ /16 3-5/16 3-1/8 LS-5 RC-5 R-5, R-17 F-6, F-7, F-20, F MM MM UNITED s Highly Popular and Practical Bushings!
7 HL - HLU Head Liner Bushings Head Liner HL and HLU BIG TOUGH SPECIFY 'HL' FOR GROUND SPECIFY 'HLU' FOR UNGROUND O.D. Tolerances of to A I.D. RANGE B O.D. SIZE C FRACTIONAL LENGTH OVERALL / ANSI LENGTH SYMBOL BY 16ths METRIC: REF. DECIMAL STANDARD SIZES: All CONCENTRICITY: LEAD: All Finished Ground RANGE BUSHINGS ARE NOT WOODRUFF AVE. DOWNEY, CA TELEPHONE (562) / (800) IN CA / FAX (562) /(800) Head Liner TECHNICAL DATA NOM./METRIC MAX - MIN NOM. MAX - MIN SYMBOL F G K 2" / HL /8 3/ MM / " HL /8 3/ MM / / HL /2 3/ MM " / HL /8 3/ / MM / / HL /8 3/ / MM / " HL /4 3/16 2-1/ MM / / HL /8 3/16 2-3/ MM / / HL /4 7/32 2-9/ MM " / HL " 7/ / MM / " HL /4 7/ /32 4-3/ / HL /8 7/ /32 4-1/ / HL /2 7/ /32 4-3/ / HL /4 7/ / MM " / HL " 7/ / MM
8 L - LU Headless Liner Bushings Headless Liner A I.D. RANGE B O.D. SIZE C FRACTIONAL LENGTH OVERALL / ANSI LENGTH SYMBOL BY 16ths METRIC: REF. ONLY DECIMAL NOM. / METRIC MAX - MIN NOM. MAX - MIN SYMBOL " MM / L / MM " L / MM / L " MM / L / MM / L / MM " L / MM / L / MM / L " MM / L / " L / / L / / L / MM / L " MM STANDARD SIZES: All CONCENTRICITY: LEAD: All Finished Ground RANGE BUSHINGS ARE NOT Headless Liner L and LU BIG TOUGH SPECIFY 'L' FOR GROUND SPECIFY 'LU' FOR UNGROUND O.D. Tolerances of to / L UNITED s Highly Popular and Practical Bushings!
OUTER RACE SHIM SPACERS METRIC OUTER RACE SHIM SPACERS. All Dimensions in Millimeters. Material:300 Series Stainless Steel
OUTER RACE SHIM SPACERS Material:300 Series Stainless Steel METRIC OUTER RACE SHIM SPACERS All Dimensions in Millimeters Material:300 Series Stainless Steel 6-16 INNER RACE SHAFT SPACERS 3 /32" To 1 /2"
More informationISO 9001:2008 RegIS Reg te te ed QUALIt QUALI Y SYS Y SYS CATALOG 2110
TLO 0 ISO 900:008 Registered QULITY SYSTEM ow igh re Your Stan dards? Theirs ounterbored ase ardened Ours No ounterbore ull bearing surface sup ports the ol for the entire length of bushing. You ll drill
More informationdumont Minute Man Broaches
Catalog K dumont Minute Man Broaches Standard and Special Broaches Keyway Broaches and Sets Internal Hole and Surface Broaches The dumont Company, Greenfield, Massachusetts www.dumont.com The dumont Company
More informationA COMPLETE LISTING OF OUR WASHERS BY INNER DIAMETER STARTS ON PAGE D32
A COMPLETE LISTING OF OUR WASHERS BY INNER DIAMETER STARTS ON PAGE D32 Component Flat Washers Component Flat Washers The Largest Selection in the World! Steel, Stainless Steel and Brass The standard Flatwasher
More informationMS Back-up, Spiral
MS 28782 Back-up, Spiral 1. Material: MIL-R-8791. 2. Surface must be smooth and free from irregularities. 4. Z gap dimension to be met with retainer over a mandrel of M diameter +.000 -.002. 5. Dash numbers
More informationTHREAD/SCREW - Drill & Tap Chart
Machine Screw THREAD/SCREW Drill & Tap Chart Threads Per Inch Min Dia Alum, Brass, & Plasitcs 75% Thread Tap Drills Stainless Steel, Steels & Iron 50% Thread Clearance Hole Drills Close Fit All Materials
More informationALE-40. R06 Miniature Brass Body Regulator. Water and Compressed Air Service 1/8" and 1/4" PTF Port Sizes. Air line equipment.
Air line equipment R Miniature Brass Body Regulator Water and Compressed Air Service 1/" and 1/" PTF Port Sizes Compact design, corrosion resistant construction Brass body with choice of plastic or brass
More informationOperator s/parts Manual
Operator s/parts Manual 24 & 30 Folding No-Till Drill Harrow Manufacturing, Inc. P.O. Box 5060 Salina, Kansas 67402-5060! Read the Operator s manual entirely. When you see this symbol, the subsequent instructions
More informationHardened Steel Washers
USS (Type A Wide) Flat Washers Hardened Steel Washers Grade 8 S.A.E. Dimensions American Standard Lbs. Per No./Pcs. Gauge M Pcs. Per Lb. 3/16 9/16 1/4 18 (3/64) 2.8 361 1/4 3/4 5/16 16 (1/16) 6.7 149 5/16
More informationASYBCO 90 O ELBOW LONG RADIUS O.D. I.D.
90 O ELBOW LONG RADIUS Standard weight Extra strong Schedule 160 Double extra strong ASTM A-234 ASME / ANSI B16.9 Carbon and ferritic alloy steel Produced from X-rayed, stress-relieve welded pipe. Welds
More informationEXH. Specifications. Descriptions. Min. working pressure MPa
Functional explanation Primary pressure flowed from passes through check valve on side, and flows in chamber A and B. Primary pressure also passes through pressure adjustment section and switching valve,
More informationNominal O.D. SERIES 110FW. 64mm 89mm 114mm 168mm 222mm 276mm 330mm 391mm 445mm 498mm 552mm
(DN25) 1.5" (DN40) (DN100) (DN150) (DN200) (DN250) (DN300) 1 (DN350) (DN400) 1 (DN450) (DN500) 2 (DN600) 3 (DN900) 4 (DN1200) 5 (DN1350) O.D. 2.50" 10.8 15.3 43.3 64mm 1 C 2 2 2 L Minimum L 0.7 1.0 1.3
More informationBRINGING YOU THE SINCE 1980
BRINGING YOU THE QUALIT Y YOU DESERVE SINCE 1980 2 0 16 P R O D U C T C ATA LO G A Division of Vermont Precision Tools, Inc. QUALITY POLICY Our policy is to consistently achieve or exceed customer satisfaction
More informationConductor Bushings Series 8174
> Current lead-in for Ex d enclosures > 1 to 72 conductors combined in one current lead-in > Series screw-in plug-in > For voltages up to max. 1 V > For size conductor up to 7 mm 2 www.stahl.de 3163E The
More informationWater Fittings & Hose
Connector Plugs A d1 d R H Male Type Brass Part R Di H A Number Series BSPT CM251 1/8 9 17 22 25 200 CM252 Series 1/4 9 19 26 29 1/4 Flow CM253 3/8 9 19 30 30 CM351 1/8 13 25 26 35 CM352* 300 1/4 13 25
More informationTsubaki Sprocket Capabilities
Tsubaki Sprocket Capabilities Introduction to Made-to-Order Sprockets At Tsubaki, our commitment is to bring you the highest value in the industry today. Period. And as a full line supplier of power transmission
More informationContinental Industries TRANSITION FITTINGS or FAX Visit
Continental Industries TRANSITION FITTINGS 1-800-558-1373 or FAX 1-800-788-1668 Visit www.conind.com ABOUT US Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and
More informationTechnical Data Sheet TI-F50 Locking Units series KFH
English translation of German original Locking Units series KF Further important practical advice is given in Operating Manual BA-F50., Rod diameter 18 mm 50 mm øz 8 L 2 6 x 6 0 min. 4x30 KF 18 to KF 32,
More informationMeter, PD Series, E3 A1, S1 and E4 S1 Prior to 2005 Parts List
Issue/Rev. 0.0 (2/13) Meter, PD Series, E3 A1, S1 and E4 S1 Prior to 2005 Parts List Bulletin PO01001 33 Pre 1994 39 32 31 21 Pre 1994 45 18 48 44 30 78 57 46 Note: Angled housing not shown. The Most Trusted
More information2-3/8 REG JM-4 $1,536 RM-4 $1, /4 REG JM-3 $1,536 RM-3 $1, /8 REG JM-8 $1,827 RM-8 $2,268 TM-8 $3,177 Add $610 $640 $640 $640
MILLING TOOLS Mill Size O.D. 2-1/4-2-1/2 2-5/8-2-3/4 2-7/8-3-1/8 3-1/4-3-5/8 3-3/4-4-1/4 4-3/8-4-5/8-4-3/4 4-7/8-5 1-1/4 JM-1 $1,395 RM-1 $1,817 1-1/4 JM-2 $1,536 RM-2 $1,921 1-1/4 JM-3 $1,536 RM-3 $1,921
More informationBlum TANDEM Concealed Runner
Blum TANDEM Concealed Runner The TANDEM runner is the premier solution for wooden drawers and pullouts from Blum. Featuring ultra light running action, on nylon cylindrical rollers, for maintenance free
More informationPosition locking powerful chuck. CKL2-*-HC Series CKL2-40CS-HC CKL2-50CS-HC CKL2-63CS-HC CKL2-80CS-HC Compressed air to
RV* FH1 G G B FH Specifications Descriptions Cylinder bore size Working fluid Max. working pressure Min. working pressure Ambient temperature Port size Operational stroke length Rod diameter Capacity of
More informationGAS DISTRIBUTION PRODUCTS TRANSITION FITTINGS
GAS DISTRIBUTION PRODUCTS TRANSITION FITTINGS CONTINENTAL INDUSTRIES, INC. The Ultimate Connection CONTINENTAL INDUSTRIES, INC. ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, Inc.,
More informationISO 407 INTERNATIONAL STANDARD. Small medical gas cylinders Pin-index yoke-type valve connections
INTERNATIONAL STANDARD ISO 407 Third edition 2004-11-01 Small medical gas cylinders Pin-index yoke-type valve connections Petites bouteilles à gaz médicaux Raccords de robinets du type à étrier avec ergots
More informationC N C M a c h i n i n g ( 1 2 D )
8 8 5 8 C N C M a c h i n i n g ( 1 2 D ) 40S/40E/40M A Machining Technology Course 8 8 5 8 : C N C M a c h i n i n g ( 1 2 D ) 4 0 S / 4 0 E / 4 0 M Course Description Students develop skills and knowledge
More informationPneumatic spool valve islands
Pneumatic spool valve islands P7.GB.R MEGA SPOOL VALVE ISLANDS MEGA pneumatic spool valve islands offer maximum performance along with flexibility, easy installation and simple operation. Due to their
More informationBUTTERFLY VALVES. Toll Free (877) - ICFLUID -2-
BUTTERFLY VALVES 1. General HyrdoWer is a globally recognized manufacturer of power unit accessories. They have become specialists in the design of Butterfly Valves and Hydraulic Compensators. The shut
More informationTorqBolt Wedge Anchors Torque Controlled Expansion Anchor
TorqBolt Wedge Anchors Torque Controlled Expansion Anchor Product Description The Torqbolt wedge anchor is a torque-controlled, wedge expansion anchor for heavy duty fastening applications where high pull
More informationPressure reducing valve, direct operated
Electric Drives and Controls Table of contents Hydraulics Pressure reducing valve, direct operated Model ZDR 6 D Nominal size 6 Series 4X Maximum operating pressure 20 bar (3050 PSI) Maximum flow 50 L/min
More informationHand lever valves VHER
Hand lever valves VHER Hand lever valves VHER Key features Powerful Flexible Practical -M- Flow 170 3800 l/min 4/3-way valve mid-position closed mid-position exhausted mid-position pressurised Connections:
More information// ADapters GUIDelines
// ADapters GUIDelines ADAPTER SELECTION Selection of an appropriate ALFAGOMMA adapter for a given application depends on the fluid system operating parameters listed below and the tube material and wall
More informationInstallation, Operation and Maintenance Manual for Back Pressure Regulator
Installation, Operation and Maintenance Manual for Back Pressure Regulator Model 8860 2009 Groth Corporation IOM-8860 Rev. B 12541 Ref. ID: 95565 Page 2 of 13 Table of Contents I. INTRODUCTION 3 II. DESIGN
More information- Written price quotations are valid for 30 days from the date of the quote unless otherwise noted.
SPECIFICATIONS - All material is solid brass with a #8 mirror finish unless otherwise noted. - All material sold by length is priced in one foot increments. ORDERING PROCEDURE - Use a Purchase Order number.
More informationACCESSORIES. Standard packing
ACCESSORIES HC RELAYS (Sockets and Terminal ) FEATURES. HC Relay Sockets In the table below, the suitable for each type of HC relay is indicated by a black dot. ) Plug-in type, type, and wrapping type
More informationWide opening parallel grippers Series CGLN
CATALOGUE > s 202 Wide opening parallel grippers Series CGLN > Grippers Series CGLN Magnetic Sizes: ø 0-6 - 20-25 - 32 mm» High flexibility during mounting» High grip force» Rack and pinion synchronized
More informationINFORMATION SHEET: SERIES GRC PARALLEL GRIPPERS
INFORMATION SHEET: SERIES GRC PARALLEL S IMPORTANT INFORMATION DO NOT DISCARD! Use this formation sheet to assist with gripper stallation and setup. File with matenance or mache documentation. TO ORDER
More informationDouble Pilot Operated Cartridge Check Valve, Size 8
Double Pilot Operated Cartridge Check Valve, Size 8 Q max = 7 l/min (19 gpm), p max = 35 bar (5 psi) pilot operated, two-stage, spring-closed cartridge-type poppet valve Compact design for cavity type
More informationHow to Order RM0 0 Z. IN/OUT fitting type Metric size Inch size Straight Elbow Straight Elbow Straight Elbow Straight Elbow ø ø ø ø ø ø ø ø ø/ ø/ ø/ ø
Series RM/ End lock RME Port Plug End block End block type Mounting position L Left side R Right side L side end block 0. L VVQ0000 Single unit regulator / Port plug for regulator block ø0 0 Options Note
More informationIndex Table. Model 794. Installation, Operating and Maintenance Instructions
CLOCKWISE MANUAL MAKING INTO CCW TABLE Index Table Model 794 Installation, Operating and Maintenance Instructions Black & Webster Products Division 545 Hupp Ave. P.O. Box 831, Jackson, Michigan 49204 2009
More informationINSTALLATION INSTRUCTIONS. Parts List. Tools Required. Before You Begin. Installation. Customer Information BICYCLE ATTACHMENT JUL.
INSTALLATION INSTRUCTIONS JUL. 2006 Parts List Bicycle attachment Key plates (2) Tools Required Phillips screwdriver Flat-tip screwdriver Before You Begin Customer Information This Bicycle Attachment is
More informationDigital relief valves D-CG
Digital relief valves D-G unctional Symbols D-G- Specifications Size Maximum working pressure Rated flow Maximum flow Maximum adjustable pressure Ma Minimum control pressure Hysteresis Repeatability emperature
More informationBrass Tubular. P-Traps. Item # Description Qty
B r a s s T u b u l a r P-Traps 1 1-1/4 17 ga CP P-Trap 1B with brass nuts 1D with box flange 1BD with box flange and brass nuts 115 with 15 wall bend 1B15 with 15 wall bend and brass nuts 1D15 with 15
More informationParts Manual. Scraper Hitches PH:
Parts Manual Scraper Hitches 12-18 1 Table of Contents A123299 Swivel Hitch 3 A1063527 Super Swivel Hitch 4 A125056 Yoke Hitch 5 A125057 Super Capacity Hitch 6 A125223 MDU Hitch 7 A123224 360 Swivel Hitch
More informationBores: ø 10, 16, 20, 25, 32 mm
> Series CGLN wide opening parallel grippers CATALOGUE > Release 8.8 Series CGLN wide opening parallel grippers New version Bores: ø 0, 6, 20, 25, 32 mm»» High installation versatility»» Rack and pinion
More informationBridge Plugs, Ball Drop & Caged Ball Plugs For Zone Isolation
Bridge Plugs, Ball Drop & Caged Ball Plugs For Zone Isolation ADVANTAGE composite bridge plug, caged ball and ball drop (flow thru) frac plug provide a means to isolate multiple zones during high pressure
More informationM i l l i n g O p e r a t i o n s I ( 1 1 C )
8 8 5 4 M i l l i n g O p e r a t i o n s I ( 1 1 C ) 30S/30E/30M A Machining Technology Course 8 8 5 4 : M i l l i n g O p e r a t i o n s I ( 1 1 C ) 3 0 S / 3 0 E / 3 0 M Course Description Students
More informationQuality Cutting Tools Carbide Tipped Solid Carbide 2009
Quality Cutting Tools Carbide Tipped Solid Carbide 2009 Keyseats Counterbores End Mills Drills Reamers INDEX BY NAME 2 INDEX OF PRODUCTS PAGE SHANK CUTTERS Chamfer Cutters 17 Corner Rounding Cutters 18
More informationSIT Group 710 MINISIT MULTI-FUNCTIONAL GAS CONTROL THERMOELECTRIC FLAME SUPERVISION DEVICE PRESSURE REGULATOR TEMPERATURE CONTROL PIN 0085AQ0287
SIT Group 710 MINISIT MULTI-FUNCTIONAL GAS CONTROL THERMOELECTRIC FLAME SUPERVISION DEVICE PRESSURE REGULATOR TEMPERATURE CONTROL PIN 0085AQ0287 MULTI-FUNCTIONAL CONTROL WITH THERMOSTAT Multi-functional
More informationCKL2 Series. Powerful chuck. Operational stroke length: 5, 6, 8, 10, 12, 16, 20, 23mm. Specifications. Switch specifications
RV* FH1 G B FH G A S Specifications Descriptions Size Cylinder bore size mm Working fluid Max. working pressure MPa Min. working pressure MPa Ambient temperature C Port size Operational stroke length mm
More informationGASKET CUTTER SYSTEMS
Product Catalog No. 0503 New Metric Sizes Included GASKET CUTTER SYSTEMS The Leader In Gasket Cutting Tools for Over 75 Years EXTENSION GASKET CUTTERS Now you can cut accurate gaskets quickly and efficiently
More informationT H E G E O R G E W H A L L E Y C O M P A N Y w w w. c o o l a n t f e d t o o l i n g. c o m
Solid Steel Stop Screw Note: When coolant-thru-the-tool is not necessary, these screws can also be used as a standard Backup or Adjusting Screw no. 101-001 855-001 3/4-16 L.H. 101-002 855-002 13/16-16
More informationElectrically Operated Pressure-Relief Cartridge, Size 10
Electrically Operated Pressure-Relief Cartridge, Size 1 Q max = 14 l/min (37 gpm), p max = bar (5 psi) seated pilot stage, spool-type design, with remote contral port Z Series WUVPOC-2, WUVPLC-2 1 Description
More informationGEMO 1.3 SANITARY ISO2037
SANIARY ISO2037 51 UES AND FIINGS Catalog able of Contents page 53 66 ISO2037 FIINGS Introduction & Order Information ends 8009 S2WK.. 55 8010 SL2WS... 55 8011 S2WCL... 55 8012 SL2WS... 56 ees 8013 S7W...
More informationComponents for air preparation and pressure adjustment. OUT port position ( ) connected Rear side. of IN port. Air tank. directly.
Components preparation and pressure adjustment ABP Overview ABP is a component that enables boosting by s only up to twice primary pressure (.0MPa max.) in combination with using air tank but not using
More informationContinental Industries STEEL SERVICE TEES or FAX Visit
Continental Industries STEEL SERVICE TEES 1-800-558-1373 or FAX 1-800-788-1668 Visit www.conind.com ABOUT US Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and
More information10 - TU0425 BU Color B Black W White R Red BU Blue Y Yellow G Green C Clear YR Orange. Tubing model. Inch size (Series TIUB) Model 3.
Series -TU Tubing For general pneumatic tubing Flexible tubing Curve and Operating pressure MPa - Refer to page for Safety Instructions and pages 7 to for Fittings and Tubing.. Applicable for general industrial
More informationHEAVY DUTY PNEUMATIC
HEAVY DUTY PNEUMATIC Series A4 MEDIUM DUTY HYDRAULIC Series H4 PERMANENTLY LUBRICATED HEAVY DUTY PNEUMATIC Series L4 586.778.7680 SERIES A4/L4/H4 39 A4/L4/H4 FEATURES 1 1 9 9 12 8 7 5 12 3 13 4 10 2 11
More informationInstallation Guide Wall Mounted Angled Flagpole
Installation Guide 1.5m - 4m Angled Flagpole Dimensions Flagpole Dimensions Wall Bracket Dimensions 2m Aluminium 76mm Glassfibre 114.3mm angle from vertical 2000mm 250mm 300mm 1715mm Backplate thickness
More informationF OVERHEAD CONSTRUCTION & STRINGING EQUIPMENT WIRE GRIPS WIRE GRIPS SELECTION CHART PATENTED HI-TOOL TRIGGER GRIP
WIRE GRIPS All models are fitted with swing down safety latch, with most models including a patented one handed trigger grip as standard. Convenient sized and special shaped pulling eyes to suit all brands
More informationMUELLER. Mega-Lite Drilling Machine. Reliable Connections. table of contents PAGE. Equipment 2. Operating Instructions 3-4. Parts Information 5
operating Instructions manual MUELLER Mega-Lite Drilling Machine table of contents PAGE Equipment 2 Operating Instructions 3-4 Parts Information 5 Travel Charts 6-11! WARNING: 1. Read and follow instructions
More informationSide-of-Pole Mount for 1 Module (SPM1) For Module Types A & B
Side-of-Pole Mount for 1 Module (SPM1) For Module Types A & B ASSEMBLY INSTRUCTIONS step-by-step assembly and installation Version 1, Rev A PCN 080311-2 SP3363-1 Side-of-Pole Mount for 1 Module (SPM1)
More informationAS13 1F-M3 AS13 1F-M5 AS23 1F-01 AS23 1F-02
Spee Controller with One-touch Fittings Series Elbow Style, Universal Style Minimizes installation time an cost Reuces the mounting height an enables compact machinery esign. Effective area is larger than
More informationSpecial square punch with flattened corners
Special square punch with flattened corners Mild steel (St37), plastic and aluminium to 2.0 Punching of burr-free openings 12.7 dia pilot drill 503102 Punch including punch, die, draw stud, counter nut
More informationOperating instruction for the quick-change tap holders type:
type: HF 20 HF 30 Date of edition: 15.07.2008 Stage of alteration: 4 Please keep this for future use! Contents: 1 Application range, safety instructions and technical data... 3 1.1 Application range,
More informationGACELA roller runners
INDEX roller runners 1... pp. 4 RUNNERS... ADJUSTABLE... FOR DOWEL-FIX DRAWER ASSEMBLY... QUICK ASSEMBLY... WITH ADJUSTABLE FRONT... FOR DROP-DOWN FRONT... 4 5 6 7 8 2 GACELA-3... 38 GACELA-3 RUNNERS...
More informationK&B Vault and Riser Closures
K&B Vault and Riser Closures K&B Vault Closures K&B Closures are strong, lightweight, and protect a wide variety of vault splice configurations with an air and water tight seal. K&B closures offer a full
More informationNHR-X-X Encore Feed Hoppers
Instruction Sheet P/N 60986-0 NHR-X-X Encore Feed Hoppers WARNING: Allow only qualified personnel to perform the following tasks. Follow the safety instructions in this document and all other related documentation.
More informationUCA2 Series. Bore size: 10, 16, 25, 32. UCA2 UCA2-L (with switch) Double acting Compressed air to 60 (no freezing)
SCP* CMK CM SC CKV C/OV CT MDC SMD JSK/M U STR SRL SM RCC Specifications Descriptions Bore size mm ctuation Working fluid Max. working pressure MPa Min. working pressure MPa Withstanding pressure MPa mbient
More informationTABLE OF CONTENTS PRODUCTS & INFORMATION
SHORING CATALO G TABLE OF CONTENTS PRODUCTS & INFORMATION PAGE HL SHORING FRAMES (10k/leg)...3 STEEL SHORING ACCESSORIES... 4 SHORING TOWER... 5 SHORING JACK... 6 SHORING FRAME ALLOWABLE WORKING LOADS...7
More informationPNEUMATIC CONNECTORS SELECTION
PNEUMATIC CONNECTORS SELECTION Basic Model Diameter Inches (mm) Round Pneumatic Selection Chart No. of Tubes on Tubulation Diameter Inches (mm) Page Rating (psi)* 19 M & F. 460 (11.7) 19.040 (1.02) 8 100
More informationF13.11 PARALLEL HINGES F13 PROJECT-OUT WINDOWS AND TOP HUNG WINDOWS
F13 PROJECT-OUT WINDOWS AND TOP HUNG WINDOWS F13.11 01.06.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. General...F13.11.03
More informationEncore PE 50-lb Feed Hopper
Instruction Sheet P/N 160429-01 Encore PE 50-lb Feed Hopper WARNING: Allow only qualified personnel to perform the following tasks. Follow the safety instructions in this document and all other related
More informationFITTING IDENTIFICATION AMERICANT THREAD TYPES APPENDIX ALFAGOMMA // APPENDIX. Dash numers. NPTF (National Pipe Tapered Fuel)
// FITTINGS GUIDelines FITTING IDENTIFICATION numers Most fluid piping system sizes are measured by dash numbers. These are universally used abbreviations for the size of component expressed as the numerator
More informationNorth American sealing solutions Bridge Plug Ball Drop Frac Plug Caged Ball Frac Plug
North American sealing solutions Bridge Plug Ball Drop Frac Plug Caged Ball Frac Plug The North American Sealing Solutions composite bridge plug, caged ball and ball drop (flow thru) frac plug provide
More informationCourtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800)
hose \ `hoz \ n : a flexible tube for conveying gases or fluids tubing \ `t(y)u-bing \ n : a stiff material in the form of a tube used for conveying gases or fluids Do you use a garden tube? The answer
More informationNYT CLT- VYH /8 O.D. Copper Tubing 1/8 O.D. Nylon Tubing (Former Part No ) 1/8 O.D. Miniature Vinyl Hose (Former Part No
hose \ `hoz \ n : a flexible tube for conveying gases or fluids tubing \ `t(y)u-bing \ n : a stiff material in the form of a tube used for conveying gases or fluids Do you use a garden tube? The answer
More information005 Series Modular Valves
5 Series Modular Valves ype of Modular Valve Class Graphic Symbols age Solenoid Operated Directional Valve DSG-5- *** - * - ressure Control Valves Flow Control Valves Directional Control Valves Modular
More informationU.S. TSUBAKI BS/DIN ROLLER CHAIN
TSUBAKI BS/DIN ROLLER CHAIN BS/DIN Roller Chain These chains are manufactured to International Standards Organization metric dimensions (ISO 606), British Standard (BS 228), and DIN 8187. They are available
More informationSMP-BC Sanitary Mixproof Valve
SMP-BC Sanitary Mixproof Valve Application SMP-BC is a sanitary pneumatic seat valve, designed for safety and leak detection when two different products flow through only one valve The valve is for use
More informationSmith Meter PD Meter Meter, PD Series, F4 S6, S7. Parts List Bulletin PO01012 Issue/Rev 0.0 (7/13)
Smith Meter PD Meter Meter, PD Series, F4 S6, S7 Parts List Bulletin PO01012 Issue/Rev 0.0 (7/13) 17 34 71 71 19 33 21 71 58 35 68 25 26 10 44 60 59 61 24 55 54 57 16 14 29 36 28 42 70 48 27 41 32 6 47
More informationGripping rotary modules
Gripping rotary modules Gripping rotary modules GRIPPING ROTARY MODULES Series Size Page Gripping rotary modules RP 314 RP 1212 318 RP 1216 322 RP 1520 326 RP 2120 330 RP 2128 334 RC 338 RC 1212 342 RC
More informationCLIPPARD HOSE & TUBING
hose \ `hoz \ n : a flexible tube for conveying gases or fluids tubing \ `t(y)u-bing \ n : a stiff material in the form of a tube used for conveying gases or fluids Do you use a garden tube? The answer
More informationF OVERHEAD CONSTRUCTION & STRINGING EQUIPMENT GRIP SELECTION
Hi-Tool NGK Wire Grips (MADE IN JAPAN) safety latch, with most models including a patented one grip as Convenient be more cost effective by being able to 40, 50 & 60kN grip models feature a twist grip
More informationBARRIER OFFSET 0" A 6" 6" A 12" 12" A 26" A 26" 3A OR 4A L OR S * ** L OR S L OR S
ACCEPTABLE (TCB) TYPES AND ANCHORING DETAILS BASED ON UNDERLYING SURFACE TYPE AND BARRIER OFFSET FROM DROP-OFF BARRIER OFFSET UNDERLYING SURFACE 0" A 6" 6" A 12" 12" A 26" A 26" TCB TYPE DETAIL TCB TYPE
More informationDP Spare parts list. Demolition pulverizer. DP 2800 s/n DEQ Construction Tools GmbH No
DP 2800 Spare parts list Demolition pulverizer DP 2800 s/n DEQ139266-2018 Construction Tools GmbH No. 3390719501 2018-01-01 General information This spare parts list applies to the following: Part number
More informationMAINTANCE MANUAL CNC ROTARY TABLE MODEL: DMNC-5C YUASA INTERNATIONAL.
MAINTANCE MANUAL CNC ROTARY TABLE MODEL: DMNC-5C YUASA INTERNATIONAL. INDEX DESCRIPTION PAGE (1)SPECIFICATION 2 (2)OUTSIDE DIMENSION LAYOUT 3 (3)INSPECTION REPORT 4 (4)PREPARATION FOR OPERATION 5 4-1.LUBRICATING
More informationPIONEER OIL TOOLS LIMITED
Sir William Smith Road, Kirkton Industrial Estate, Arbroath, Angus, Scotland, UK. DD113RD Tel: +44 (0)1241 877776 Fax: +44 (0)1241 871037 Email: sales@pioneeroiltools.com Website: www.pioneeroiltools.com
More informationDiaphragm Accumulators
1. DESCRIPTION 1.1. FUNCTION Fluids are practically incompressible and cannot therefore store pressure energy. The compressibility of a gas is utilised in hydro-pneumatic accumulators for storing fluids.
More informationInfrared Linescanners
Thermal Imaging and Temperature Profiles for Continuous Process Monitoring and Quality Control HD Infrared Linescanners PROCESS & ANALYTICAL INSTRUMENTS Mountings and Accessories LSPHD Mountings and Accessories
More informationSLEEVE AND COLLAR MOUNT FREESTALLS
SLEEVE AND COLLAR MOUNT FREESTALLS FREESTALLS-1 FEATURES Hot dipped galvanized or pre-galvanized loop option. Heavy galvanized 3 1/2 post Easy installation Adjustable height Cow friendly loop profile to
More informationRE / Meter out pressure compensator Sandwich plate design Type SCA... /Series 2X. Description of function, Section 1/6. Replaces: 09.
Meter out pressure compensator Sandwich plate design Type SCA... /Series X Sizes 6, 5 up to 35 bar up to 35 L/min RE 9 47/.96 RE 9 47/.96 Replaces: 9.87 Sandwich plate design Load compensation in lines
More informationWagner Die Supply W A G N E R P U N C H E S ONTARIO, CA TACOMA, WA DALLAS, TX ELMHURST, IL. Diemaking & Diecutting Source and Resource
W A G N E R P U N C H E S www.wagnerdiesupply.com ONTARIO, CA TACOMA, WA DALLAS, TX ELMHURST, IL America s Punch Experts - Since 1947. Since we opened our doors in 1947, Wagner has focused on providing
More informationFASTENERS, CLAMPS & STRAPS
Bands...169 Buckles...170 Cable Ties...171 Clip, Ring & Pin Kits...168 Clips, Rings & Pins...168 Hose Clamps...170,171 Screw Anchor Expanders...168 Strap Tensioners & Adaptors...172 Tie Wire...172 Tie
More informationFITTINGS THREAD LUBRICANTS. Fittings 20,000 PSI
Jetstream offers a wide variety of fittings with various connection types to fit your 20,000 psi application needs. The standard connection types, Type M, MP, and MP Tube lance, are available in standard
More information4-63 T UBE FITTINGS TUBING P OLYURETHANE TUBING SERIES TU P RODUCTS FOR A LIST OF STOCKED PRODUCTS, PLEASE SEE THE CURRENT SMC PRICE LIST S TOCKED
T UBE FITTINGS 4-63 P OLYURETHANE TU Flexible tubing For general industrial air and water applicatons 20m and 100m coils 8 colour option Available in metric size (TU) and inch size (TIUB) CONTACT SMC FOR
More informationHose Reel Enclosure Retrofit Kit
Instructions Hose Reel Enclosure Retrofit Kit 332143A EN Retrofits the Series 500 Hose Reel Enclosure for use with a XD20 Series Hose Reel. For professional use only. Kit No. 24P914 Important Safety Instructions
More information3-1/8 in (79mm) Scalloped Hollow Carrier Gun
4 SPF (13 SPM) GunFacts Tube : 0 o 60 o 90 o 180 o 1 1 1 2 1 2 0363-B**-041 0363-B**-046 0363-B**-044 0363-A**-044 0363-B**-042 0363-A**-042 0502-B**-041 0502-B**-046 0502-B**-044 0502-A**-044 0502-B**-042
More informationA Low Cost Digital Angle Gage, version 3
A Low Cost Digital Angle Gage, version 3 By R. G. Sparber Copyleft protects this document. 1 Sometimes re-inventing the wheel has advantages. What you see here is just a variation on a sine bar. The accuracy
More informationMaterial Handling Hose
Novaflex 5000 Slurry King Hose Pure Gum Liner Tough, versatile alternative to inflexible, cumbersome steel tubing. The easy handling and reusable quick-fastening flange system make installation a snap.
More informationORNAMENTAL CANTILEVER GATE INSTRUCTIONS
U.S.A. Patent Number 5,36,83 ORNAMENTAL CANTILEVER GATE INSTRUCTIONS *NOTICE: Ornamental Cantilever Gates are supplied with rolls of 2 mesh safety screening in sufficient quantities to cover the entire
More information