Current as of March 15, 2019 Subject to change Any changes to this program will be updated in the meeting app.
|
|
|
- Kory Cannon
- 5 years ago
- Views:
Transcription
1 2019 Spring Committee on Petroleum Measurement Standards Meeting March 18-22, 2019 Hyatt Regency Dallas Dallas, Texas Current as of March 15, 2019 Subject to change Any changes to this program will be updated in the meeting app. Sunday, March 17 1:00pm 5:00pm Registration Marsalis Connection 1:00pm 5:00pm Sponsor/ Exhibitor Display Setup Only Marsalis Connection 5:30 pm 7:30 pm Chairman s Orientation Cumberland L Monday, March 18 7:00 am 8:30 am Welcome Breakfast and General Session Marsalis A 7:00 am 4:00 pm Registration Marsalis Connection 7:00 am 5:00 pm Sponsor/Exhibitor Displays Marsalis Connection 8:30 am 10:00 am COPM Orientation (Open to new attendees and anyone who wishes to expand their knowledge of COPM procedures for standards development and committee structure.) 8:30 am 10:00 am COPM New Leadership Development (Open to returning attendees who are interested in pursuing a leadership position on a COPM work group or Subcommittee) 8:30 am 10:00 am Vessel Experience Factor (COMA 17.9) 8:30 am 9:30 am Measurement of Multiphase Flow Working Group (CPMA Ch. 20.3) 8:30am 10:00am Standard Practice for Manual Sampling of Petroleum and Petroleum Products (COMQ Ch. 8.1) Sanger AB 8:30 am 11:00 am Calculation of Petroleum Prover Quantity Calibration (COLM Ch. 12.4) 10:00 am 10:30 am Mid-Morning Coffee Service Marsalis Connection
2 10:00 am 12:00 pm Tank Calibration Working Group (COLM Ch. 2) 10:00 am 12:00 pm Reconciliation of Liquid Tank Car Quantities (COMA Ch. 23.2) 10:00 am 12:00 pm LNG Sampling (COMQ Ch. 8.6) 10:00 am- 12:00 pm Coriolis Meters (COLM Ch. 5.6) 10:00 am 12:00 pm CPMA Draft Standard: Application of Hydrocarbon Phase Behavior Modeling in Upstream Measurement and Allocation Systems 1:00 pm 2:00 pm Electronic Liquid Measurement Working Group (COLM 21.2) 1:00 pm 2:00 pm Displacement Provers Working Group (COLM Ch. 4.2) 1:00 pm 2:30 pm Standard Practices for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products (COMQ 8.3) 1:00 pm 2:30 pm Electronic Liquid Measurement Working Group (COGFM Ch. 21.1) Sanger AB Cotton Bowl Moreno AB 1:00 pm 3:00 pm COMA Ad Hoc Group on New Standards Cumberland KL 1:00 pm 3:00 pm Terms and Definitions Work Group (COMET Ch. 1) 1:00 pm 3:00 pm New Ad Hoc Group for Physical Property Standard Cumberland A 1:00 pm 3:30 pm Production Allocation Measurement Working Group (CPMA Ch. 20.1) 2:00 pm 2:30 pm Afternoon Coffee Service Marsalis Connection 2:30 pm 3:00 pm Networking Break Marsalis Connection 3:00 pm 5:00 pm Physical Properties Work Group (COMQ Ch. 11) 3:00 pm 5:00 pm Tank Gauging Task Group (COLM Ch. 3)
3 3:00 pm 5:00 pm Spanish Translation Working Group (COMET) 3:00 pm 5:00 pm Measurement of Cargoes on Board Tank Vessels (COMA Ch. 17.2) 3:30 pm 5:00 pm Normal Conditions Addenda (COLM Ch. 6.1) Cumberland KL 5:15 pm 6:15 pm API-EI Coordination Meeting Cumberland A
4 Tuesday, March 19 7:00 am 8:30 am Breakfast and General Session Marsalis A 7:00 am 4:00 pm Registration Marsalis Connection 7:00 am 5:00 pm Sponsor/Exhibitors Displays Marsalis Connection 8:30 am 10:00 am Online Water Determination (COMQ Ch ) 8:30 am 10:00 am Lease Automatic Custody Transfer (LACT) Systems Working Group (COLM Ch. 6.4A) 8:30 am 10:00 am Measurement of Bulk Cargoes by Draft Survey (COMA Ch ) 8:30 am 10:00 am COGFM Ad Hoc Group on Emerging Issues & New Standards 8:30 am 10:30 am CPMA Wet Gas Sampling WG Cumberland KL 10:00 am 10:30 am Mid-Morning Coffee Service Marsalis Connection 10:00 am 11:00 am Testing Protocol for Flow Computers (COGFM Ch. 22.5) 10:00 am 12:00 pm Calculation of Petroleum Quantities (COLM Ch. 12) 10:00 am 12:00 pm Sediment and Water TAG (COMQ Ch. 10) Marsalis A 10:00 am 12:00 pm DRA Influence on Turbine Metering/Ad Hoc Committee 10:00 am 12:00 pm Measurement of Refrigerated and Pressurized Cargos on Marine Tank Vessels (COMA Ch ) 10:30 am 12:00 pm CPMA Ad Hoc Group on Emerging Issues/New Standards 10:30 am 12:30 pm Review and Revision of TR2571, Fuel Gas Measurement Simplified Flow Measurement and System Uncertainty Determination 11:00 am 12:00 pm Sampling Work Group (COMQ Ch. 8)
5 1:00 pm 1:30 pm Measurement of Liquid Hydrocarbons by Ultrasonic Flow Meters Using Transit Time Technology (COLM Ch. 5.8) 1:00 pm 2:30 pm Sampler Performance TAG Working Meeting (COMQ Ch. 8.2) 1:00 pm 2:30 pm Committee on Production Measurement and Allocation Coordinating Committee 1:00 pm 2:30 pm Orifice Meters Working Group (COGFM Ch. 14.3) 1:00 pm 2:30 pm Temperature Determination (COMQ Ch. 7) 1:00 pm 3:00 pm Introduction to the Determination of the Volume of Displacement and Tank Powers (COLM Ch ) 1:30 pm 4:00 pm Committee on Measure Education and Training (COMET) Marsalis A 2:00 pm 2:30 pm Afternoon Coffee Service Marsalis Connection 2:30 pm 3:00 pm Networking Break Marsalis Connection 3:00 pm 5:00 pm Mass Measurement by Hydrostatic Tank Gauges (COLM Ch. 16.2) 3:00 pm 5:00 pm Metering (COLM Ch. 5) Cumberland B 3:00 pm 5:00 pm COMQ Ch. Ad Hoc on New Standards 3:00 pm 5:00 pm Committee on Production Measurement and Allocation (CPMA) 4:00 pm 5:00 pm COMA Coordinating Committee 5:00 pm 6:00 pm COMQ Coordinating Committee 6:00 pm 7:30 pm Annual Spring Awards Reception (API and COPM Awards Presentation) Reunion ABC
6 Wednesday, March 20 7:00 am 8:30 am Early-Morning Coffee Service Marsalis Connection 7:00 am 3:00 pm Registration Marsalis Connection 7:00 am 5:00 pm Sponsor/Exhibitor Displays Marsalis Connection 7:30 am 9:30 am Committee on Measurement Accountability (COMA) 8:00 am 9:00 am Proving Systems Working Group (COLM Ch. 4) 9:00 am 11:00 am Venturi Meter Ad-Hoc Group (COGFM) Cumberland KL 10:00 am 10:30 am Mid-Morning Coffee Service Marsalis Connection 10:00 am 12:00 pm COLM, Std 2554, Measurement and Calibration of Tank Cars 10:00 am 12:00 pm Committee on Measurement Quality (COMQ) 10:00 am 12:00 pm Metering Systems Working and Drafting Groups (COLM Ch. 6) 11:00 am 4:30 pm Measurement of Bulk Cargoes by Draft Survey Drafting Group (COMA Ch ) 1:00 pm 2:00 pm COGFM Coordinating Committee 1:00 pm 5:00 pm Committee on Evaporation Loss Estimation (CELE) H Cumberland KL H 2:00 pm 3:00 pm Afternoon Coffee Service Marsalis C 3:00 pm 4:00 pm COLM Coordinating Committee
7 Thursday, March 21 7:00 am 9:00 am Registration McMillan (API Office) 8:00 am 12:00 pm Committee on Evaporation Loss Estimation (CELE) 8:00 am 12:00 pm Committee on Liquid Measurement (COLM) 1:00 pm 5:00 pm Committee on Gas Fluids Measurement (COGFM) 5:15 pm 8:00 pm COPM Executive Committee Meeting (Executive Session Committee Members Only) H Cumberland JKL Marsalis A Cockrell Coffee service for the day inside or just outside meeting rooms Friday, March 22 8:00 am 12:00 pm Committee on Petroleum Measurement (COPM) Pegasus
8:30 am 10:00 am Calculation of Petroleum Prover Quantity Calibration (COLM Ch. 12.4)
2018 Fall Committee on Petroleum Measurement Standards Meeting October 8-12, 2018 Hyatt Regency San Francisco San Francisco, California www.api.org/meetings Current as of August 6, 2018 Subject to change
2016 Spring Committee on Petroleum Measurement Standards Meeting March 14-18, 2016 Hyatt Regency Dallas at Reunion Dallas, Texas
2016 Spring Committee on Petroleum Measurement Standards Meeting March 14-18, 2016 Hyatt Regency Dallas at Reunion Dallas, Texas www.api.org/meetings Current as of February 23, 2016 Subject to change Final
2018 Fall Refining and Equipment Standards Meeting FINAL PROGRAM
2018 Fall Refining and Equipment Standards Meeting FINAL PROGRAM November 12-15, 2018 Hyatt Regency Orlando Orlando, Florida www.api.org/meetings Current as of November 11, 2018 Subject to change SOME
2016 Fall Refining and Equipment Standards Meeting
2016 Fall Refining and Equipment Standards Meeting November 14-17, 2016 Hyatt Regency New Orleans New Orleans, Louisiana www.api.org/meetings Current as of October 18, 2016 Subject to change Pre- & Post-Week
2018 Spring Refining and Equipment Standards Meeting
2018 Spring Refining and Equipment Standards Meeting April 16-19, 2018 Sheraton Seattle Hotel Seattle, Washington www.api.org/meetings Current as of March 25, 2018 Subject to change SOME Pre- & Post-Week
vj.i GUIDELINES --.- PETROLEUM (EXPLORATION & PRODUCTION) (MEASUREMENT) REGULATIONS, 2016 (L.I. 2246)
vj.i --.- GUIDELINES TO PETROLEUM (EXPLORATION & PRODUCTION) (MEASUREMENT) REGULATIONS, 2016 (L.I. 2246) Published: February 2017 Petroleum Commission, Ghan GUIDELINES TO THE PETROLEUM (EXPLORATION AND
Manual of Petroleum Measurement Standards Chapter 6 Metering Assemblies Section 3A Pipeline and Marine
Manual of Petroleum Measurement Standards Chapter 6 Metering Assemblies Section 3A Pipeline and Marine Loading/Unloading Measurement Systems Draft Edition January 2018 Introduction This standard serves
Stormy Phillips BASICS OF LEASE AUTOMATIC CUSTODY TRANSFER (LACT) SYSTEMS
Stormy Phillips BASICS OF LEASE AUTOMATIC CUSTODY TRANSFER (LACT) SYSTEMS Why is Stormy Walking Funny?? What is a LACT system? Introduction A LACT unit is a group of equipment designed specifically for
Final Program. Sunday, June 10, General
2018 Exploration & Production Standards Conference on Oilfield Equipment and Materials June 11-15, 2018 Sheraton Denver Downtown Denver, Colorado www.api.org Current as of June 12, 2018 Subject to change
ONSITE PROVING OF GAS METERS. Daniel J. Rudroff WFMS Inc West Bellfort Sugar Land, Texas. Introduction
ONSITE PROVING OF GAS METERS Daniel J. Rudroff WFMS Inc. 13901 West Bellfort Sugar Land, Texas Introduction With the increased use of Natural Gas as a fuel, and higher natural gas prices buyers and sellers
GAS TRANSPORTER S REQUIREMENTS FOR GAS MEASUREMENT SYSTEMS CONNECTED TO THE NATIONAL GRID GAS NETWORK
SPECIFICATION FOR GAS TRANSPORTER S REQUIREMENTS FOR GAS MEASUREMENT SYSTEMS CONNECTED TO THE NATIONAL GRID GAS NETWORK J510 ( Rev 04/06 ) OCTOBER 2005 . CONTENTS Page FOREWORD BRIEF HISTORY iii iii INTRODUCTION
2018 Exploration & Production Winter Standards Meeting January 22-26, 2018 Hyatt Regency San Antonio San Antonio, Texas
2018 Exploration & Production Winter Standards Meeting January 22-26, 2018 Hyatt Regency San Antonio San Antonio, Texas www.api.org Current as of November 29, 2017 Subject to change Final program distributed
The ERCB Directive 017 Overview
The ERCB Directive 017 Overview November 4, 2009 By Bill Cheung Why measure and report production, flaring, and venting? Public Safety and Environment Understand and monitor emissions Reservoir Engineering
2015 Spring Refining and Equipment Standards Meeting
2015 Spring Refining and Equipment Standards Meeting April 13-16, 2015 Sheraton Seattle Hotel Seattle, Washington Pre- and Post-Week Meetings: April 11-12 and April 16-17, 2015 Program (Current as of April
Meeting Minutes CELE Meeting, Fall 2007 Hyatt Regency Hotel, Atlanta, Georgia Tuesday, October 23, :00 PM 5:00 PM
Meeting Minutes CELE Meeting, Fall 2007 Hyatt Regency Hotel, Atlanta, Georgia Tuesday, October 23, 2007-3:00 PM 5:00 PM 1. Introductions and Opening remarks from the members All present See sign-in sheets
ONSITE PROVING OF GAS TURBINE METERS Daniel J. Rudroff Invensys Metering Systems
ONSITE PROVING OF GAS TURBINE METERS Daniel J. Rudroff Invensys Metering Systems 1322 Foxwood, Houston, Texas 77008 INTRODUCTION With the increased use of Natural Gas as a fuel, higher natural gas prices,
Gas Measurement Fundamentals Certification. Curriculum
Gas Certification Institute, LLC P.O. Box 131525 Houston, Texas 77219-1525 281-598-7200 Phone 281-598-7199 Fax contact@gascertification.com www.gascertification.com Curriculum Copyright 2007-2012 Gas Certification
FAQs about Directive PNG017: Measurement Requirements for Oil and Gas Operations
FAQs about Directive PNG017: Measurement Requirements for Oil and Gas Operations General Is it acceptable to report no gas production? All associated gas (gas produced from an oil well) or non-associated
Oil And Gas Office Houston Fax Test Separator / Off-Shore Metering
Oil And Gas Office Houston 281 361 0708 Fax 201 361 0708 Test Separator / Off-Shore Metering Prepared By : Mr. Phil Lawrence A. M. Inst Mech E. Sales Manager (Oil and Gas Industry) 2.0 Philosophy for Test
Measurement Guideline for Upstream Oil and Gas Operations. Oil and Gas Commission
Measurement Guideline for Upstream Oil and Gas Operations Oil and Gas Commission March 1, 2017 1 Table of Contents Introduction... 14 Intent... 14 WHAT S NEW IN THIS EDITION... 15 Content Additions...
REVIEW OF LPG FLOW MEASUREMENT TECHNOLOGIES AND MEASUREMENT ISSUES
Executive Summary REVIEW OF LPG FLOW MEASUREMENT TECHNOLOGIES AND MEASUREMENT ISSUES A Report for National Measurement System Programme Unit Department of Trade & Industry 151 Buckingham Palace Road London
Measurement Requirements for Upstream Oil and Gas Operations
Directive 017 Revised edition February 2, 2009 Measurement Requirements for Upstream Oil and Gas Operations The Energy Resources Conservation Board (ERCB/Board) has approved this directive on February
Oil and Gas Custody Transfer
Downstream Focus By Emerie Dupuis Daniel Measurement and Control, Emerson Process Management Oil and Gas Custody Transfer When money changes hands, flow measurement accuracy matters. When flow measurement
ProSoft Technology, Inc. Summary Regarding Alberta Energy and Utilities Board Directive 017 of May 2007
Overview ProSoft Technology, Inc. Summary Regarding Alberta Energy and Utilities Board Directive 017 of May 2007 ProSoft Technology s Gas and Liquid Flow Computer (AFC) products will comply with the requirements
Type , , S2.20 Specialized test procedure Procedure for testing LPG bulk meters using a vapour displacement prover
Field Inspection Manual Part: 4-STP Section: 26 Page: 1 of 14 Type 52.11-13, 52.21-23, S2.20 Specialized test procedure Procedure for testing LPG bulk meters Application This test is applied to LPG bulk
NEW VERSAFLOW CORIOLIS
Steffen Baecker June 20, 2017 NEW VERSAFLOW CORIOLIS With Stable Two-phase Flow Measurement Honeywell Internal VersaFlow Flow Technologies Volume flow measurement Conductive fluids only - Water - Chemicals
Diagnostics for Liquid Meters Do they only tell us what we already know? Terry Cousins - CEESI
Diagnostics for Liquid Meters Do they only tell us what we already know? Terry Cousins - CEESI DIAGNOSTICS FOR LIQUID METERS-DO THEY ONLY TELL US WHAT WE ALREADY KNOW? T. Cousins CEESI CMSI INTRODUCTION
Operational experiences with the EuroLoop Liquid Hydrocarbon Flow Facility
Operational experiences with the EuroLoop Liquid Hydrocarbon Flow Facility Jos G.M. van der Grinten, NMi EuroLoop Bart van der Stap, Flowways Dick van Driel, Krohne Abstract The operational experiences
FAQs about Directive 017
FAQs about Directive 017 General What measurement points are covered in this directive? The requirements in this directive cover all measurement points required by the Oil and Gas Conservation Regulations
Issue Date: Effective Date: Supersedes: V-15 (rev. 2)
Bulletin Category: VOLUME Bulletin: V-15 (rev. 3) Page: 1 of 6 Manual Correction of Measured Liquid Volumes to Equivalent Volumes at Reference Conditions 1.0 Scope This bulletin communicates the policy
TWO PHASE FLOW METER UTILIZING A SLOTTED PLATE. Acadiana Flow Measurement Society
TWO PHASE FLOW METER UTILIZING A SLOTTED PLATE Acadiana Flow Measurement Society Gerald L. Morrison Presented by: Mechanical Engineering Department Daniel J. Rudroff 323 Texas A&M University Flowline Meters
Vehicle-mounted meters, pump supplied
Purpose This inspection procedure outline (IPO) defines the minimum tests which must be performed to ensure that basic volumetric measuring devices comply with the legislation. Application Vehicle-mounted
Vehicle- or rack-mounted liquefied gas meters, pump supplied
Purpose This inspection procedure outline (IPO) defines the minimum tests which must be performed to ensure that basic volumetric measuring devices comply with the legislation. Application Rack/fixed metering
SOFTWARE APPLICATIONS DETAILS. Abstract This document is the calculation details for working with KELTON Standard Calculation Package (FLOCALC.
SOFTWARE APPLICATIONS FLOCALC.net CALCULATION DETAILS Abstract This document is the calculation details for working with KELTON Standard Package (FLOCALC.net) Document Title: FLOCALC.net Details Contents
API MPMS Chapter 17.6 Guidelines for Determining the Fullness of Pipelines between Vessels and Shore Tanks
API MPMS Chapter 17.6 Guidelines for Determining the Fullness of Pipelines between Vessels and Shore Tanks 1. Scope This document describes procedures for determining or confirming the fill condition of
Wet Gas Flowmetering Guideline
Wet Gas Flowmetering Guideline ASME MFC-19G 2008 THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS Three Park Avenue New York, New York 10016-5990 CONTENTS Foreword... v Standards Committee Roster... vi 1 Introduction...
Manual of Petroleum Measurement Standards Chapter 6.1A
Manual of Petroleum Measurement Standards Chapter 6.1A Metering Assemblies General Considerations DRAFT EDITION, Xxxxxx 2017 Table of contents to be created by editing committee 1 Scope This standard is
Gas Flow Calibration Basics
Basics - May, 2012 Gas Flow Calibration Basics Gas Flow Calibration Basics - May, 2012 Prepared By: Edward Morrell VP of Engineering - Bios Gas & Flow & Calibration Flow is the Quantity of material transported
Validation of Custody Transfer Metering Skid at Site After Laboratory Proving
flotek.g 2017- Innovative Solutions in Flow Measurement and Control - Oil, Water and Gas August 28-30, 2017, FCRI, Palakkad, Kerala, India Validation of Custody Transfer Metering Skid at Site After Laboratory
National Occupational Standards For Measurement Processes Approved by UKCG May 2003
National Occupational Standards For Measurement Processes Approved by UKCG May 2003 1 of 36 AMENDMENTS AMENDMENT & DATE PAGES CHANGES MADE BY: CHECKED BY: APPROVED BY: Updated to new OPITO logo 30-01-08
Software Applications
Software Applications FLOCALC TM Details Abstract This document contains the calculation details for working with the KELTON Standard Package (FLOCALC) Document Title: FLOCALC Details Contents 1.0 Revision
Special Documentation Proline Promass 500 Coriolis Flowmeter Modbus RS485 Petroleum Application Package
MANUAL Special Documentation Proline Promass 500 Coriolis Flowmeter Modbus RS485 Petroleum Application Package SD02137O/06/EN/01.17 Valid as of version 01.01.zz (Device firmware) 71382463 Important All
Operational Settings:
instrucalc features more than 70 routines associated with control valves, ISO flow elements, relief valves and rupture disks, and calculates process data at flow conditions for a comprehensive range of
SLOP RECEPTION AND PROCESSING FACILITIES
RULES FOR CLASSIFICATION OF SHIPS NEWBUILDINGS SPECIAL SERVICE AND TYPE ADDITIONAL CLASS PART 5 CHAPTER 8 SLOP RECEPTION AND PROCESSING FACILITIES JANUARY 2011 CONTENTS PAGE Sec. 1 General Requirements...
Truck-mounted Mass Flow Metering for LPG Delivery
Truck-mounted Mass Flow Metering for LPG Delivery Itron, Inc. 1310 Emerald Rd. Greenwood, SC 29646 Introduction The mathematician Gustave De Coriolis first described the Coriolis Effect, which is an inertial
Accurate Measurement Guidelines
Introduction This standard is designed to provide production operations personnel with detail information concerning Fieldwood's Measurement Standard Operating Procedures. Included are the following: Meter
Towards ISO Koos van Helden, B.ASc. International Account Manager Eastern Hemisphere mailto:
Towards ISO 17089-1 Koos van Helden, B.ASc. International Account Manager Eastern Hemisphere mailto: koos.vanhelden@kpnmail.nl Who am I? My name: Koos van Helden International Account Manager Eastern Hemisphere
FUNDAMENTALS OF NATURAL GAS LIQUID MEASUREMENT. Don Sextro, Targa Resources. Dan Comstock, The University of Texas (PETEX)
FUNDAMENTALS OF NATURAL GAS LIQUID MEASUREMENT Don Sextro, Targa Resources Dan Comstock, The University of Texas (PETEX) Introduction The measurement of natural gas liquids (NGL) is similar in many respects
"BS An overview of updates to the previous ( 2009 ) edition. Andrew Wrath & BS7965 Working Group
"BS7965 2013 - An overview of updates to the previous ( 2009 ) edition Andrew Wrath & BS7965 Working Group BS7965:2013 Guide to the selection, installation, operation and calibration of diagonal path transit
We re Going Global. Vessel Loss Control. Technical Notes #36
Technical Notes #36 We re Going Global Vessel Loss Control When the vessel loaded, the gauging reports showed x amount but when it arrived at its discharge port, why was the amount vastly different? In
Compiled by: B Beard. Approved by: SH Carstens. Description of requirements and procedures for compact provers to be used as verification standards.
1. Scope Description of requirements and procedures for compact provers to be used as verification standards. 2. Reference documents Trade Metrology Act SANS1698 3. Policy A. BASIC REQUIREMENTS Compact
TGD-L (LP) Tank Gauging Device TGD L (Level) TGD LP (Level Pressure) Main features:
Product data sheet TGD-L (LP) Main features: Automatic signal self-calibration reflectors in every the tank, 2 seconds the acoustic Less cabling signal only is guided 2 wires in a steel pipe going Non-contact
APPENDIX C TANK BATTERIES
C-i APPENDIX C TANK BATTERIES C - 1. Understanding the Tank Battery. 1. Openings to Vessels for Lines. 2. The Shape and Purpose of Vessels. 3. From the Well to the Tank Battery. C-1 The Lease Pumper s
Measurement Requirements for Oil and Gas Operations
DRAFT Directive 017 Release date: Effective date: Replaces previous edition issued arch 31, 2016 easurement Requirements for Oil and Gas Operations The Alberta Energy Regulator has approved this directive
Software Applications
Software Applications FLOCALC.net Details Abstract This document is the calculation details for working with KELTON Standard calculation Package (FLOCALC.net) Document Title: FLOCALC.net Details Contents
MEASUREMENT GUIDELINES
MEASUREMENT GUIDELINES Under the Newfoundland and Labrador and Nova Scotia Offshore Areas Drilling and Production Regulations ISBN #978-1-927098-05-9 TABLE OF CONTENTS PART ONE - GENERAL... 1 1.1 Introduction...
API Standard Venting Atmospheric and Low-Pressure Storage Tanks: Nonrefrigerated and Refrigerated
General API Standard 2000 - Venting Atmospheric and Low-Pressure Storage Tanks: Is there any limit for the maximum allowable linear velocity or any other parameter for the roof of a floating roof tank
Ships tank - General requirements
INTERNATIONAL OIML R 95 RECOMMENDATION Edition 1990 (E) Ships tank - General requirements Bateaux-citernes - Prescriptions générales OIML R 95 Edition 1990 (E) ORGANISATION INTERNATIONALE DE MÉTROLOGIE
Level MEASUREMENT 1/2016
Level MEASUREMENT 1/2016 AGENDA 2 A. Introduction B. Float method C. Displacer method D. Hydrostatic pressure method E. Capacitance method G. Ultrasonic method H. Radar method I. Laser method J. Level
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 17089-1 First edition 2010-11-15 Measurement of fluid flow in closed conduits Ultrasonic meters for gas Part 1: Meters for custody transfer and allocation measurement Mesurage
PETROLEUM & GAS PROCESSING TECHNOLOGY (PTT 365) SEPARATION OF PRODUCED FLUID
PETROLEUM & GAS PROCESSING TECHNOLOGY (PTT 365) SEPARATION OF PRODUCED FLUID Miss Nur Izzati Bte Iberahim Introduction Well effluents flowing from producing wells come out in two phases: vapor and liquid
ISO 6570 INTERNATIONAL STANDARD. Natural gas Determination of potential hydrocarbon liquid content Gravimetric methods
INTERNATIONAL STANDARD ISO 6570 First edition 2001-06-15 Natural gas Determination of potential hydrocarbon liquid content Gravimetric methods Gaz naturel Détermination de la teneur en hydrocarbures liquides
Yokogawa Systems and PCI Training
Yokogawa Systems and PCI Training 09 th December 2014 Nico Marneweck 082 883 2652 Kallie Bodenstein 083 226 2787 Marco Coccioni 072 409 5779-1 - Introduction Training customised for the South Africa Industrial
Performance Improvement of Large Installation base of Wellhead Venturi Wet Gas Measurement in Petroleum Development Oman (PDO)
Performance Improvement of Large Installation base of Wellhead Venturi Wet Gas Measurement in Petroleum Development Oman (PDO) Abdullah Al Obaidani, Khalil Al Hanashi, Hamed Al Hadhrami, Dawood Al Sulaimani
CUSTODY TRANSFER OF FLUIDS IN MALAYSIA
CUSTODY TRANSFER OF FLUIDS IN MALAYSIA 25 NOVEMBER 2017 TCFF WORKSHOP, APMP 2017 CSIR-NPL INDIA DR ABDUL RAHMAN MOHAMED 1 NATIONAL METROLOGY INSTITUTE OF MALAYSIA CONTENTS 1.0 Introduction 2.0 Act and
General Specifications
General Specifications GS 34P02P31-02E Gas Flow Calculation Portfolio (FCN-RTU) GENERAL This general specification document describes the Gas Flow Calculation Portfolio on FCN-RTU low power autonomous
Sunday, March 25. Monday, March 26
27 th ASNT Research Symposium Meetings and Events Schedule Page 1 Sunday, March 25 10:00 AM 5:00 PM Standards Development Committee Dade 1:00 PM 5:00 PM Council Office Open Palm Beach 3:00 PM 5:00 PM Registration
LPG DRIVER ATTENDED TRANSPORT LOADING
November 1993 Prepared By: Ken A. Steward. P.E. Linco-Electromatic, Inc. 4580 West Wall Street Midland, Texas 78703 LPG DRIVER ATTENDED TRANSPORT LOADING INTRODUCTION The safest and most accurate method
Listening to the flow
Listening to the flow Measuring the flow of gas and liquids moving together through pipes is a notoriously difficult challenge. Malcolm Brown learns more about BP s initiative in developing a sonar-based
MEASUREMENT DEFINITIONS
MEASUREMENT DEFINITIONS Until relatively recently, different terms for oil volumes were used on ship and ashore leading to confusion and built-in accounting discrepancies. The accurate determination of
HYDRAULICS. H89.8D - Hydraulic Bench
HYDRAULICS H89.8D - Hydraulic Bench 1. General The H89.8D and ancillary equipment have been developed to provide a comprehensive range of experiments in fluid mechanics. The bench is of robust construction
NFOGM temadag
NFOGM Temadag 19.3.2015 Challenges with calibration and adjustment of liquid USM`s Standards for Gas USM`s Author : Steinar Fosse, Norwegian Petroleum Directorate 1 NFOGM temadag 19.3.2015 Challenges with
Manual of Petroleum Measurement Standards Chapter 3 Tank Gauging
Manual of Petroleum Measurement Standards Chapter 3 Tank Gauging Section 5 Standard Practice for Level Measurement of Light Hydrocarbon Liquids Onboard Marine Vessels by Automatic Tank Gauging FIRST EDITION,
John Wright NIST Fluid Metrology Group February 21, 2013
John Wright NIST Fluid Metrology Group February 21, 2013 WGFF Meetings 2010 at FLOMEKO in Taipei, 28 attendees 2011 at BIPM, France, 11 attendees 2012 at International Symposium on Fluid Flow Measurement,
Field Instrumentation Training Strategy
Field Instrumentation Training Strategy 21 st Nico Marneweck 082 883 2652 Kallie Bodenstein 083 226 2787 Marco Coccioni 072 409 5779-1 - Introduction Training customised for the South Africa Industrial
All-Russia D.I.Mendeleyev Scientific and Research Institute for Metrology (VNIIM)
All-Russia D.I.Mendeleyev Scientific and Research Institute for Metrology (VNIIM) APMP 2015 TCFF Meeting 2 Nov. 2015 Beijing, China Konstantin Popov k.v.popov@vniim.ru Contents Participating in second
GAS CONTRACTS MEASUREMENT LANGUAGE AND ITS EVOLUTION. Lohit Datta-Barua, Ph. D. Enterprise Products
GAS CONTRACTS MEASUREMENT LANGUAGE AND ITS EVOLUTION Lohit Datta-Barua, Ph. D. Enterprise Products GENERAL: The business environment in our industry has seen tremendous change since early 1980s. This has
Impact of imperfect sealing on the flow measurement of natural gas by orifice plates
Impact of imperfect sealing on the flow measurement of natural gas by orifice plates Rubens Silva Telles 1, Kazuto Kawakita 2 1 IPT Instituto de Pesquisas Tecnológicas, São Paulo, Brazil, rtelles@ipt.br
Ron Gibson, Senior Engineer Gary McCargar, Senior Engineer ONEOK Partners
New Developments to Improve Natural Gas Custody Transfer Applications with Coriolis Meters Including Application of Multi-Point Piecewise Linear Interpolation (PWL) Marc Buttler, Midstream O&G Marketing
Measurement & Analytics Wet gas monitoring
Product guide PG/FLOW/010-EN Measurement & Analytics Wet gas monitoring Economical wet gas metering using non-proprietary correlations Measurement made easy Introduction With many of the most economically
Sponsorship Prospectus. May 20-23, 2019 Foxwoods Resort & Casino Mashantucket, CT
Sponsorship Prospectus May 20-23, 2019 Foxwoods Resort & Casino Mashantucket, CT About INNOVATE 2019 This will be JMT s 13th year hosting INNOVATE, a conference for nonprofit finance professionals, that
Technical Bulletin, Meter Factor Linearization
Last Updated: 06-April-2009 TB-970803B Technical Bulletin, OMNI FLOW COMPUTERS, INC. 12620 West Airport Boulevard, Suite 100 Sugar Land, Texas 77478 United States of America Phone-281.240.6161 Fax: 281.240.6162
IE068: Process Instrumentation Technology
IE068: Process Instrumentation Technology IE068 Rev.002 CMCT COURSE OUTLINE Page 1 of 8 Training Description: This course covers fundamental and practical of instrumentation measurements including Flow
TECHNIQUES OF COMPOSITE SAMPLING. Kris Kimmel. YZ Systems, Inc Pollok Drive Conroe, Texas 77303
TECHNIQUES OF COMPOSITE SAMPLING Kris Kimmel YZ Systems, Inc. 3101 Pollok Drive Conroe, Texas 77303 Introduction Since a gas sampling system can be referred to as a cash register it is very important that
General Specifications
General Specifications GS 34P02P32-01E Gas Flow Calculation Portfolio (FCN-500) GENERAL This general specification document describes the Gas Flow Calculation Portfolio for FCN-500 on FCN autonomous controllers.
Installation Effects on Ultrasonic Flow Meters for Liquids. Jan Drenthen - Krohne
Installation Effects on Ultrasonic Flow Meters for Liquids Jan Drenthen - Krohne Jan G. Drenthen & Pico Brand ALTOSONIC 5 Installation effects on ultrasonic flow meters for liquids 1. Introduction 2. Meter
IE011: Process Control & Instrumentation Technology
IE011: Process Control & Instrumentation Technology IE011 Rev.001 CMCT COURSE OUTLINE Page 1 of 8 Training Description: This intensive course covers fundamental and practical of instrumentation measurements
Fundamentals of NGL Sampling Systems. By Dominic Giametta & Jim Klentzman
Fundamentals of NGL Sampling Systems By Dominic Giametta & Jim Klentzman The purpose of this paper is to discuss in depth the systems we use as a standard to sample natural gas liquids, or NGL s. Before
Temperature Determination Liquid-in-Glass Thermometers
This document is not an API Standard; it is under consideration within an API technical committee but has not received all approvals required to become an API Standard. It shall not be reproduced or circulated
Rupture Disc Sizing for Micro Motion Coriolis Sensors
Rupture Disc Sizing for Micro Motion Coriolis Sensors www.emerson.com/micromotion Rupture Disc Sizing White Paper 1 Introduction Emerson s Micro Motion Coriolis flow meters are widely used in many industries
This document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 5167-5 First edition 2016-03-01 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 5: Cone meters
InstrumentationTools.com
Author: Instrumentation Tools Categories: F Measurement Fmeter Characteristics Experts claim that over 75 percent of the fmeters installed in industry are not performing satisfactorily. And improper selection
General Specifications
General Specifications GS 34P02P31-01E Gas Flow Calculation Portfolio (FCN-100/FCN-RTU/FCJ) GENERAL This general specification document describes the Gas Flow Calculation Portfolio on FCN/FCJ autonomous
CALCULATING THE SPEED OF SOUND IN NATURAL GAS USING AGA REPORT NO Walnut Lake Rd th Street Houston TX Garner, IA 50438
CALCULATING THE SPEED OF SOUND IN NATURAL GAS USING AGA REPORT NO. 10 Jerry Paul Smith Joel Clancy JPS Measurement Consultants, Inc Colorado Engineering Experiment Station, Inc (CEESI) 13002 Walnut Lake
API MPMS Chapter 17.12/EI HMC 51 PROCEDURES FOR BULK LIQUID CHEMICAL CARGO INSPECTIONS
1 Scope 1.1 General 1.2 Measurement stages 1.3 Quality control 1.4 Summary of data to be reported 2 Normative References 3 Definitions 4 General principles 4.1 The purpose of a cargo inspection 4.2 General
Standards are finally approved by the Standards High Council of Iranian Ministry of Petroleum.
FOREWORD This Standard is intended to be used within and for Iranian Ministry of Petroleum (N.I.O.C, N.I.G.C, N.P.C., N.I.O.R.D.C. and other affiliate organizations and companies) and has been prepared
Micro Motion Multiphase Applications
Micro Motion Multiphase Applications Production Volume Reconciliation (PVR) Transient Bubble Remediation (TBR) Transient Mist Remediation (TMR) Supplement MMI-20026578, Rev AC February 2018 Safety and
Case Study Results on Natural Gas Custody Transfer Measurement with Coriolis Meters in Saudi Arabia
Case Study Results on Natural Gas Custody Transfer Measurement with Coriolis Meters in Saudi Arabia Introduction Mohammed Al-Torairi: Saudi Aramco mohammed.torairi@aramco.com WC-1337, Al-Midra Tower Dhahran
Have you seen a truck weighing bridge? Do you know how it works?
Have you seen a truck weighing bridge? Do you know how it works? Weigh bridge It weighs the empty weight of the truck and then the loaded weight. The difference is the weight of the cargo on that truck.
RESOLUTION A.567(14) adopted on 20 November 1985 REGULATION FOR INERT GAS SYSTEMS ON CHEMICAL TANKERS
INTERNATIONAL MARITIME ORGANIZATION A 14/Res.567 16 January 1986 Original: ENGLISH ASSEMBLY - 14th session Agenda item lo(b) IMO RESOLUTION A.567(14) adopted on 20 November 1985 THE ASSEMBLY, RECALLING