2015 Spring Refining and Equipment Standards Meeting
|
|
|
- Monica McCarthy
- 5 years ago
- Views:
Transcription
1 2015 Spring Refining and Equipment Standards Meeting April 13-16, 2015 Sheraton Seattle Hotel Seattle, Washington Pre- and Post-Week Meetings: April and April 16-17, 2015 Program (Current as of April 1, 2015) Saturday, April 11, 2015 Mechanical Equipment API Task Force 616, Gas Turbines for the Petroleum, Chemical, and Gas Industry Services Sunday, April 12, 2015 General Registration 1:00 pm 5:00 pm Sponsor and Exhibitor Display (Setup) 1:00 pm 5:00 pm Aboveground Storage Tanks/Inspection/Corrosion and Materials Mechanical Equipment SCAST/SCI/SCCM Coordination Committee (Leadership Teams & API Reps) 4:00 pm 5:00 pm Std. 692, Task Force on Compressor Dry Gas Seals API Task Force 616, Gas Turbines for Petroleum, Chemical, and Gas Industry Services 8:00 am 3:30 pm API Task Force 677, General Purpose Gear Units for Petroleum, Chemical, and Gas Industry Services
2 Sunday, April 12, 2015 Piping and Valves Refinery Equipment Task Force on Std. 594, Check Valves: Flanged, Lug, Water, and Butt-Welding 3:00 pm 5:00 pm CRE Chairs and Sponsors Workshop (Members and Invited Guests Only) 6:00 pm 8:00 pm
3 Monday, April 13, 2015 General Welcome Breakfast and General Session Oil and Gas: Where We Are and Where We Are Going 7:00 am 8:30 am Registration Sponsor and Exhibitor Displays Spouses Breakfast 8:00 am 10:00 am Orientation for New Committee Members and New Attendees 8:30 am 9:30 am Special Afternoon Networking Break 2:30 pm 3:00 pm Welcome Reception 6:00 pm 7:00 pm Aboveground Storage Tanks 12 Series (Production Tanks) Task Group 8:30 am 12:00 pm Tank Safety Task Group (2015, 2026, 2027, and 2207) 8:30 am 12:00 pm Refrigerated Tank Task Group 8:30 am 4:30 pm RP 545, Recommended Practice for Lightning Protection of Aboveground Storage Tanks for Flammable or Combustible Liquids 1:00 pm 5:00 pm Owners and Operators 4:30 pm 6:00 pm Manufacturers and Contractors 5:00 pm 6:00 pm
4 Monday, April 13, 2015 Corrosion and Materials Task Group on Corrosion and Materials Research 8:30 am 10:30 am API 934 H, Cr-Mo Reactor Maintenance 10:30 am 12:30 pm API 941, High Temperature Hydrogen Attack 1:30 pm 5:30 pm Electrical Equipment RP 546, Brushless Synchronous Machines 500 kva and Larger RP 500 and 505, Electrical Classification and NEC Proposals RP 545, Recommended Practice for Lightning Protection of Aboveground Storage Tanks for Flammable or Combustible Liquids 1:00 pm 5:00 pm Fitness-for-Service Heat Transfer Equipment API/ASME Joint Committee on Fitness-for-Service Task Group on Std. 560, Fired Heaters (Burners & Dampers) 8:30 am 12:00 pm SCHTE (API 537) & SCPRS (API 521) Meeting 8:30 am 12:00 pm Task Group on Std. 668, Brazed Aluminum Plate Fin Heat Exchangers 8:30 am 4:30 pm
5 Monday, April 13, 2015 Heat Transfer Equipment Inspection SCHTE Fired Consensus Group 1:00 pm 4:30 pm SCHTE Steering Committee (Committee Members Only) 4:30 pm 6:00 pm Inspection Codes Task Group 8:30 am 4:30 pm NDE Task Group / NDE Qualification 4:30 pm 6:00 pm Instrument and Control Systems Mechanical Equipment Subcommittee on Instruments and Control Systems SOME Joint Review on Standard Paragraphs 8:30 am 12:00 pm SOME Joint Review on Std. 616, Gas Turbines for the Petroleum, Chemical, and Gas Industry Services 1:00 pm 5:00 pm
6 Monday, April 13, 2015 Piping and Valves Piping Executive Session (Users Only) 8:30 am 9:30 am Piping Manufacturers and Contractors 8:30 am 9:30 am Piping Subgroup on Gate, Globe, and Check Valves 9:30 am 12:30 pm Piping Subgroup on Quarter Turn Valves and Valve Quality 1:30 pm 5:00 pm Pressure Relieving Systems SCHTE (API 537) & SCPRS (API 521) Meeting 8:30 am 12:00 pm Task Force on Std. 520, Pressure Relieving Devices, Part II Refinery Equipment Technical Data Committee CRE Refractories Project Group Technical Data Book
7 Tuesday, April 14, 2015 General Registration 7:00 am 4:00 pm Sponsor and Exhibitor Displays Spouses Breakfast 7:00 am 9:30 am Special Afternoon Networking Break 2:30 pm 3:00 pm Aboveground Storage Tanks Subgroup Fabrication 8:00 am 5:30 pm Subgroup Design 8:00 am 5:30 pm Corrosion and Materials SCCM Officers (Officers Only) 7:00 am 8:00 am API 934-A-B-C-E CrMo Reactor Specifications 8:00 am 11:00 am RP 939-C Sulfidation 9:00 am 11:00 am API 934-I, CrMo Reactor Inspection 11:00 am 12:00 pm High Temperature Hydrogen Attach JIP (Sponsors Only) 12:00 pm 2:00 pm API RP 934-F, Reactor MPT 2:00 pm 4:00 pm RP 934-J, Coke Drum Repairs 4:00 pm 5:00 pm
8 Tuesday, April 14, 2015 Electrical Equipment RP 546, Brushless Synchronous Machines 500 kva and Larger RP 500 and 505, Electrical Classification and NEC Proposals Fitness-for-Service Heat Transfer Equipment API/ASME Joint Committee on Fitness-for-Service Task Group on RP 565, Reactor Furnaces in Sulfur Recovery Units for General Refinery Services General Session 8:00 am 9:00 am Generators General Session 8:00 am 10 :00 am Std. 561 (Reforming Furnaces) (RPG/SCHTE Refractory Subgroup) Task Group on Std. 537, Flare Details Ballot Comment Resolution 8:00 am 6:00 pm Task Group on Std. 669, Heat Recovery Systems 8:00 am 6:00 pm Roundtable on Coatings for API 560 9:00 am 12:00 pm
9 Tuesday, April 14, 2015 Heat Transfer Equipment Generators Breakout A 10:00 am 2:30 pm Generators Breakout B 10:00 am 2:30 pm Generators Breakout C 10:00 am 2:30 pm Generators Breakout D 10:00 am 2:30 pm Std. 565 (Reactor Furnaces in Sulfur Recovery) RPG/SCHTE Refractory Subgroup 1:00 pm 6:00 pm Generators General Session 3:00 pm 6:00 pm Inspection Task Group on RP 576 7:30 am 11:30 am Task Force on RP 581, Risk-Based Inspection Ballot Resolution Session and Business Meeting Task Group on RP 580 1:00 pm 2:30 pm Task Group on RP 572 2:30 pm 4:30 pm Inspection Subcommittee Manufacturers and Contractors 4:30 pm 6:30 pm
10 Tuesday, April 14, 2015 Instrument and Control Systems Task Group RP 554, Parts 1-3, Control Systems Functions 8:00 am 11:30 am Task Group on RP 552, Transmission Systems 1:00 pm 5:00 pm Mechanical Equipment SOME Joint Review on Std. 677, General Purpose Gear Units for Petroleum, Petrochemical and Natural Gas Industries SOME Joint Review on Standard 614, Lubrication, Shaft- Sealing and Oil Control Systems and Auxiliaries 1:00 pm 4:30 pm Operating Practices Piping and Valves Registration Operating Practices Symposium (OPS) (Refining and Petrochemical Operating Companies Only) Piping Joint Meeting 8:30 am 11:30 am Task Force on Std. 607, Fire Test for Soft-Seated Quarter Turn Valves 1:00 pm 5:00 pm Task Force on Std. 622, Type Testing of Process Valve Packing for Fugitive Emissions 1:30 pm 4:30 pm Task Force on RP 621, Valve Reconditioning 1:30 pm 4:30 pm
11 Tuesday, April 14, 2015 Pressure Relieving Systems Refinery Equipment Refining Subcommittee Technical Data Committee Task Force on Std. 521, Pressure Relieving and De- Pressurized Systems Project Coordinating Committee 10:00 am 4:00 pm Refining Subcommittee (Committee Members and Invited Guests Only) 1:00 pm 6:00 pm Technical Data Book 8:30 am 12:00 pm
12 Wednesday, April 15, 2015 General Aboveground Storage Tanks Corrosion and Materials Registration 7:00 am 4:00 pm Joint Session Duplex Stainless Steel Welding JIP 8:00 am 10:00 am RP 970, Corrosion Control Documents 8:00 am 10:30 am RP 582, Welding Guidelines 10:00 am 12:00 pm RP 945, Amine SCC 10:30 am 12:00 pm SCCM Joint and Business Meeting 1:00 pm 2:30 pm Electrical Equipment RP 546, Brushless Synchronous Machines 500 kva and Larger SOEE Joint Committee 1:00 pm 5:00 pm Heat Transfer Equipment SCHTE Unfired Consensus Group 7:00 am 8:00 am Generators General Session 8:00 am 10:00 am Std. 561, Reforming Furnaces for H2 & Syngas General Session 8:00 am 9:00 am
13 Wednesday, April 15, 2015 Heat Transfer Equipment (cont d) Task Group on RP 565, Reactor Furnaces in Sulfur Recovery Units for General Refinery Services Burner Subgroup 8:00 am 6:00 pm SCHTE/SOICS RP 556, Gas Heater Controls & Instrumentation 9:30 am 12:00 pm Std. 561, Reforming Furnaces for H2 & Syngas Breakouts 1, 2, and 3 9:00 am 5:00 pm Std. 561, Reforming Furnaces for H2 & Syngas Gas Breakout A 9:00 am -5:00 pm Std. 561, Reforming Furnaces for H2 & Syngas Breakout B 9:00 am 5:00 pm Std. 561, Reforming Furnaces for H2 & Syngas Breakout C 9:00 am 5:00 pm Std. 561, Reforming Furnaces for H2 & Syngas Breakout D 9:00 am 5:00 pm Task Group on Std. 667, Plate and Frame Heat Exchangers 9:00 am 6:00 pm Generators Breakout A 10:00 am 2:30 pm
14 Wednesday, April 15, 2015 Heat Transfer Equipment (cont d) Generators Breakout B 10:00 am 2:30 pm Generators Breakout C 10:00 am 2:30 pm Generators Breakout D 10:00 am 2:30 pm SCHTE/SOICS Consensus Group 1:00 pm 2:30 pm Std. 561, Joint Meeting BMS Subgroup w/soics 3:00 pm 6:00 pm Generators General Session 3:00 pm 6:00 pm Inspection Std. 561, Reforming Furnaces for H2 & Syngas General Session 5:00 pm 6:00 pm 578 Task Group Meeting 7:30 am 9:30 am Inspector Certification Task Group 9:30 am 11:30 am Inspection Summit Planning Committee 1:00 pm 2:00 pm New NDE Qualification Document 2:00 pm 4:00 pm RP 586 Development 4:00 pm 5:30 pm
15 Wednesday, April 15, 2015 Instrument and Control Systems Joint SOICS/SCHTE RP 556, Gas Heater Controls & Instrumentation 9:00 am 12:00 pm SOICS/SCHTE Consensus Group 1:00 pm 2:30 pm Mechanical Equipment SOME Joint Review on 10-Year Plan 8:00 am 8:30 am SOME Joint Review on Std. 681, Liquid Ring Compressors for Petroleum, Chemical, and Gas Industry Services 8:30 am 12:00 pm SOME Joint Review on RP 688, Pulsation and Vibration Control in Positive Displacement Machinery Systems for Petroleum, Petrochemical, and Natural Gas Industry Services 1:00 pm 5:00 pm Operating Practices Registration Operating Practices Symposium (OPS) (Refining and Petrochemical Operating Companies Only) 7:00 am 12:00 pm Operating Practices Symposium (OPS) (Refining and Petrochemical Operating Companies Only) (Breakfast 8:00 am 8:30 am) OPS Networking Lunch (Symposium Participants Only) 12:00 pm 1:00 pm
16 Wednesday, April 15, 2015 Piping and Valves Pressure Relieving Systems Executive Roundtable (User Members Only) 8:30 am 12:00 pm Task Force on Std. 526/527, Pressure Relief Valves 8:00 am 10:00 am Task Group on Std :00 am 12:00 pm Joint Session 1:30 pm 5:00 pm Refinery Equipment CRE Refractories Project Group
17 Thursday, April 16, 2015 General Registration 7:00 am 12:00 pm Corrosion and Materials Heat Transfer Equipment WRC/MPC Heavy Wall CrMo Vessel PREVENT Program (Open to Members and Guests Upon Request) Std. 560 RPG/SCHTE Refractory Joint SCHTE-SOME Consensus Group Meeting (Unfired Equipment in SOME Standards) Task Group on RP 536, Post Combustion NOx Control 8:00 am 6:00 pm RP 565, Joint Meeting w/soics BMS Subgroup 8:00 am 6:00 pm Std. 810, Welded Plate Block Heat Exchangers 1:00 pm 6:00 pm Inspection Task Groups 570/574 7:00 am 12:00 pm Inspector Certification Exam Construction Breakout 1 (Invited Guests Only) Inspector Certification Exam Construction Breakout 2 (Invited Guests Only) Subcommittee on Inspection Joint Meeting 1:30 pm 5:00 pm
18 Thursday, April 16, 2015 Instrument and Control Systems Mechanical Equipment RP 565, Joint Meeting w/schte BMS Subgroup 8:00 am 6:00 pm Task Force on Std. 614, Lubrication, Shaft-Sealing, and Oil-Control Systems and Auxiliaries Task Force on Std. RP 681, Liquid Ring Compressors Task Force on Std. 688, Pulsation and Vibration Control in Positive Displacement Machinery Systems for Petroleum, Petrochemical, and Natural Gas Industry Services Joint SOME-SCHTE Consensus Group Meeting (Unfired Equipment in SOME Standards) Pressure Relieving Systems Refinery Equipment PERF II Inlet Stability Committee on Refinery Equipment (Members and Invited Guests Only) 8:00 am 6:00 pm
19 Friday, April 17, 2015 Heat Transfer Equipment Inspection Joint SCHTE-SOME Consensus Group Meeting (Rotating Equipment in SCHTE Fired Standards) Inspector Certification Exam Construction Breakout 1 (Invited Guests Only) Inspector Certification Exam Construction Breakout 2 (Invited Guests Only) Mechanical Equipment Joint SOME-SCHTE Consensus Group Meeting (Rotating Equipment in SCHTE Fired Standards) Task Force on Std. 688, Pulsation and Vibration Control in Positive Displacement Machinery Systems for Petroleum, Petrochemical, and Natural Gas Industry Services Task Force on Std. 614, Lubrication, Shaft-Sealing, and Oil-Control Systems and Auxiliaries Saturday, April 18, 2015 Inspection Inspector Certification Exam Construction Breakout 1 (Invited Guests Only) Inspector Certification Exam Construction Breakout 2 (Invited Guests Only)
2018 Spring Refining and Equipment Standards Meeting
2018 Spring Refining and Equipment Standards Meeting April 16-19, 2018 Sheraton Seattle Hotel Seattle, Washington www.api.org/meetings Current as of March 25, 2018 Subject to change SOME Pre- & Post-Week
2016 Fall Refining and Equipment Standards Meeting
2016 Fall Refining and Equipment Standards Meeting November 14-17, 2016 Hyatt Regency New Orleans New Orleans, Louisiana www.api.org/meetings Current as of October 18, 2016 Subject to change Pre- & Post-Week
2018 Fall Refining and Equipment Standards Meeting FINAL PROGRAM
2018 Fall Refining and Equipment Standards Meeting FINAL PROGRAM November 12-15, 2018 Hyatt Regency Orlando Orlando, Florida www.api.org/meetings Current as of November 11, 2018 Subject to change SOME
Final Program. Sunday, June 10, General
2018 Exploration & Production Standards Conference on Oilfield Equipment and Materials June 11-15, 2018 Sheraton Denver Downtown Denver, Colorado www.api.org Current as of June 12, 2018 Subject to change
Design. Pompetravaini-NSB API SB Liquid Ring Compressor for Gas Processing. Working Principle
SB Pompetravaini-NSB API SB Liquid Ring Compressor for Gas Processing A family of API liquid ring compressors has been developed and has been in the market for nearly a decade, they are specifically made
Training Fees 4,000 US$ per participant for Public Training includes Materials/Handouts, tea/coffee breaks, refreshments & Buffet Lunch.
Training Title GAS CONDITIONING & PROCESSING Training Duration 5 days Training Venue and Dates Gas Conditioning & Processing 5 07 11 April, 2019 $4,000 Dubai, UAE Trainings will be conducted in any of
ASME BOILER CODE WEEK AND PRESSURE VESSEL CODE WEEK May 5-10, 2019 Grand and Little America Hotels, Salt Lake City, Utah
ASME BOILER CODE WEEK AND PRESSURE VESSEL CODE WEEK May 5-10, 2019 Grand and Little America Hotels, Salt Lake City, Utah ***The schedule is subject to change. Please pick up the most updated schedule onsite***
Compressors. Basic Classification and design overview
Compressors Basic Classification and design overview What are compressors? Compressors are mechanical devices that compresses gases. It is widely used in industries and has various applications How they
2018 Exploration & Production Winter Standards Meeting January 22-26, 2018 Hyatt Regency San Antonio San Antonio, Texas
2018 Exploration & Production Winter Standards Meeting January 22-26, 2018 Hyatt Regency San Antonio San Antonio, Texas www.api.org Current as of November 29, 2017 Subject to change Final program distributed
Liquid Ring Compressor Catching Chemicals Conserving Cash
Liquid Ring Compressor Catching Chemicals Conserving Cash You favour inherently safer solutions avoiding hazards rather than controlling them. We have developed a new range of compressors. 1 NSB GAS PROCESSING
T e l N o : F a x N o : E m a i l : a i s h c m c - m e. c o m w w w. c m c - m e.
MU047: Practical Valve Technology: Selection, Installation, Upgrading, Inspection & Troubleshooting MU047 Rev.002 CMCT COURSE OUTLINE Page 1 of 7 Training Description: This five-day intensive course covers
2016 Spring Committee on Petroleum Measurement Standards Meeting March 14-18, 2016 Hyatt Regency Dallas at Reunion Dallas, Texas
2016 Spring Committee on Petroleum Measurement Standards Meeting March 14-18, 2016 Hyatt Regency Dallas at Reunion Dallas, Texas www.api.org/meetings Current as of February 23, 2016 Subject to change Final
Orifice plate, model FLC-OP Orifice flange, model FLC-FL Annular chamber, model FLC-AC
Flow measurement Orifice plate, model FLC-OP Orifice flange, model FLC-FL Annular chamber, model FLC-AC WIKA data sheet FL 10.01 Applications Power generation Oil production and refining Water treatment
BODY OF KNOWLEDGE API-510 PRESSURE VESSEL INSPECTOR CERTIFICATION EXAMINATION
BODY OF KNOWLEDGE API-510 PRESSURE VESSEL INSPECTOR CERTIFICATION EXAMINATION May and September, 2017 and January 2018 (Replaces May 2016) API Authorized Pressure Vessel Inspectors must have a broad knowledge
Company Profile.. About Sammi Machinery
Company Profile.. About Sammi Machinery What is Line Blind Valve? Line blinding has been used to pipe lines in various indutries wherever either positive shut-off is most concerned or full flow should
SIHI LPH-X - Liquid Ring Compressors
- Liquid Ring Compressors LPH 50523 LPH 60527 Pressure range: Suction volume range: 0.2 to 1.5 bar 260 to 780 m³/h CONSTRUCTION Sterling SIHI liquid ring compressors are displacement compressors with a
API-510 PRESSURE VESSEL INSPECTOR
BODY OF KNOWLEDGE API-510 PRESSURE VESSEL INSPECTOR CERTIFICATION EXAMINATION July 2013 (Replaces July 2012) API Authorized Pressure Vessel Inspectors must have a broad knowledge base relating to maintenance,
PROCEDURES FOR REPAIRS TO ASME NV STAMPED PRESSURE RELIEF DEVICES OF NUCLEAR SAFETY RELATED PRESSURE RELIEF VALVES
NB16 0603 NR Task Group 1 9 16 1. One update by NR task group page 3: 7/17/19 2. Two updates to S6.1 and S6.3 on page 1: 7/19/17 SUPPLEMENT 6 PROCEDURES FOR REPAIRS TO ASME NV STAMPED PRESSURE RELIEF DEVICES
Compressor Seal Replacement and Upgrades SERVICES
Compressor Seal Replacement and Upgrades SERVICES Compressor Seal Upgrades An Elliott Group compressor seal upgrade increases seal reliability and reduces process gas leakage to improve overall efficiency.
8:30 am 10:00 am Calculation of Petroleum Prover Quantity Calibration (COLM Ch. 12.4)
2018 Fall Committee on Petroleum Measurement Standards Meeting October 8-12, 2018 Hyatt Regency San Francisco San Francisco, California www.api.org/meetings Current as of August 6, 2018 Subject to change
Changes Between API STD 521 6th Ed and 5th Ed Cataloged
Changes Between API STD 521 6th Ed and 5th Ed Cataloged Dustin Smith Smith & Burgess LLC 7600 W Tidwell, Houston, TX Dustin.Smith@smithburgess.com John Burgess Jarrett Doe Smith & Burgess LLC 7600 W Tidwell,
Training Fees 4,000 US$ per participant for Public Training includes Materials/Handouts, tea/coffee breaks, refreshments & Buffet Lunch.
Training Title CONTROL & SAFETY RELIEF VALVES Training Duration 5 days Training Venue and Dates Control & Safety Relief Valves 5 06-10 May, 2018 $4,000 Dubai, UAE Trainings will be conducted in any of
Flexible Metal Hose Products
Flexible Metal Hose Products Specialty Flexible Hose Solutions of Stainless Steel The AEROCOM Advantage Aerocom offers engineered solutions that address specific flexible piping challenges such as vibration,
Section 20 TABLE OF CONTENTS Pressurized Equipment and Systems. 20.A General B Compressed Air and Gas Systems
Section 20 TABLE OF CONTENTS Pressurized Equipment and Systems Section: Page 20.A General... 20-1 20.B Compressed Air and Gas Systems... 20-4 20.C Boilers and Systems... 20-7 20.D Compressed Gas Cylinders...
SAFETY MANUAL FOR FLAMMABLE PRODUCT TRANSFER
SAFETY MANUAL FOR FLAMMABLE PRODUCT TRANSFER SUPPLIMENT TO eom IMPORTANT READ THIS MANUAL BEFORE PRODUCT INSTALLATION, OPERATION, INSPECTION & MAINTENANCE Tougher and more rigid guidelines are being established
Frequently Asked Questions Directive 056 Facilities Technical
Frequently Asked Questions Directive 056 Facilities Technical October 2017 This document clarifies and supports some of the technical requirements related to Directive 056: Energy Development Applications
PRESSURIZED EQUIPMENT AND SYSTEMS
SECTION 20 PRESSURIZED EQUIPMENT AND SYSTEMS 20.A GENERAL 20.A.01 Inspections and tests - general. a. Pressurized equipment and systems shall be inspected and performance tested before being placed in
Screw Gas Compressors & Dry Gas Seals Applications. Singapore, Mandarin Orchard Singapore. Training Course : Training Course For One Week In
Training Course : Screw Gas Compressors & Dry Gas Seals Applications Training Course For One Week In Singapore, Mandarin Orchard Singapore Which Be Held As Under Details : Tel. : 00965 22610021 99600277,
Gas Compressor Operation and Control
Training Title Gas Compressor Operation and Control Training Duration 5 days Training Venue and Dates Gas Compressor Operation and Control 5 7 11 October, 2018 $4,000 Dubai, UAE Trainings will be conducted
Current as of March 15, 2019 Subject to change Any changes to this program will be updated in the meeting app.
2019 Spring Committee on Petroleum Measurement Standards Meeting March 18-22, 2019 Hyatt Regency Dallas Dallas, Texas www.api.org/meetings Current as of March 15, 2019 Subject to change Any changes to
Record of Assessment OFFICER IN CHARGE OF AN ENGINEERING WATCH
Record of Assessment for OFFICER IN CHARGE OF AN ENGINEERING WATCH Candidate s Name Candidate s Signature Candidate s Mariner Reference NOTE TO QUALIFIED ASSESSOR(S): In performing your function as a Qualified,
Event Time Event Name Meeting Room Sunday, January Monday, January
Event Time Event Name Meeting Room Sunday, January 25 2015 Opens @ 12:00 PM - 06:00 PM Registration Opens @ 12:00 PM - 06:00 PM ASME Office 01:00 PM - 03:00 PM CNC Task Group on NQA-1 Part II Checklist
v. Size shall be specified on drawings.
SPECIFICATION FOR VACUUM INSULATED PIPING Part 1 General 1. Submittals a. After award of contract and before executing any manufacturing, shop drawings and specifications shall be submitted to the customer
VALVES OPERATION, MAINTENANCE & TROUBLESHOOTING
Training Title VALVES OPERATION, MAINTENANCE & TROUBLESHOOTING Training Duration 5 days Training Venue and Dates Valves operation, Maintenance & Troubleshooting 5 02-06 Dec $3,750 Dubai, UAE In any of
NATURAL GAS MAINTENANCE. Part 192 Subpart "M"
NATURAL GAS MAINTENANCE Part 192 Subpart "M" CONTACT INFORMATION Pamela West Pipeline Safety Specialist U.S. Department of Transportation PHMSA Inspector Training and Qualifications Main: (405) 686-2310
Process Safety Management Of Highly Hazardous Chemicals OSHA 29 CFR
Process Safety Management Of Highly Hazardous Chemicals OSHA 29 CFR 1910.119 PSM - Definition Not all refining hazards are caused by the same factors or involve ve the same degree of potential damage.
Safety in Petroleum Industry
Chemical ( Industrial ) Disaster Management Conference, Bangalore 30 January 2014 Safety in Petroleum Industry Refineries and Petrochemical plants are highly energyintensive Handle highly inflammable and
MU102: Mechanical Seals Applications for Rotating Machinery
MU102: Mechanical Seals Applications for Rotating Machinery MU102 Rev.001 CMCT COURSE OUTLINE Page 1 of 5 Training Description: All Rotating Equipment Machinery require controlling of the pumped fluids
ANNEX AMENDMENTS TO THE INTERNATIONAL CODE FOR FIRE SAFETY SYSTEMS (FSS CODE) CHAPTER 15 INERT GAS SYSTEMS
Annex 3, page 2 ANNEX AMENDMENTS TO THE INTERNATIONAL CODE FOR FIRE SAFETY SYSTEMS (FSS CODE) CHAPTER 15 INERT GAS SYSTEMS The text of existing chapter 15 is replaced by the following: "1 Application This
Pibiviesse High Performance Control Ball Valve
Pibiviesse High Performance Control Ball Valve Sizes 2 to 48 Pressure rating up to ANSI 2500# Anti-cavitation and low noise trim available High turndown High rangeability Unique self-cleaning effect Single
Welcome to the LESER Seminar, Taipei 28. June Design_of_safety_relief_valves_250804_Cal
Welcome to the LESER Seminar, Taipei 28. June 2006 1 Design of safety relief valves 2 Design of safety valves Target Classification of Pressure Relief Devices General design of Safety Relief valves 3 Design
DCV6 Disc Check Valve
1342050/6 IM-P134-22 ST Issue 6 DCV6 Disc Check Valve Installation and Maintenance Instructions Printed IM-P134-22 in the UK ST Issue 6 Copyright 20101 Safe operation of this product can only be guaranteed
MECHANICAL EQUIPMENTS: COMPRESSORS, PUMPS, SEALS, SPEED DRIVES, CONTROL VALVES & ACTUATORS & SAFETY RELIEF VALVES
Training Title MECHANICAL EQUIPMENTS: COMPRESSORS, PUMPS, SEALS, SPEED DRIVES, CONTROL VALVES & ACTUATORS & SAFETY RELIEF VALVES Training Duration 5 days Training Venue and Dates REF Mechanical Equipments:
Safety Selector Valves Dual Pressure Relief Device System
ANDERSON GREENWOOD Features and enefits Provides a safe, efficient method of switching from an active pressure relief device to a standby, maintaining system overpressure protection regardless of Safety
MSC Guidelines for Pressure Vessels
References: a. 46 CFR Part 54 Pressure Vessels S. T. Brady, CDR, Chief, Engineering Division b. ASME Boiler and Pressure Vessel Code (BPVC), Section VIII, Division 1, (1998 Edition) c. Navigation and Inspection
Liquid Ring Compressors Engineered-to-Order Compressor Systems
Liquid Ring Compressors Engineered-to-Order Compressor Systems NASH Liquid Ring Compressors Greatest Performance Range of Liquid Ring Compressors Worldwide The ability to compress wet, saturated or dirty
TECHNOLOGIES. M Series. Positive return metering pumps [API675]
![TECHNOLOGIES. M Series. Positive return metering pumps [API675]](/thumbs/90/101415964.jpg "TECHNOLOGIES. M Series. Positive return metering pumps [API675]")
M Series Positive return metering pumps [API675] Hydraulic double diaphragm metering pump in AISI 316L stainless steel A line of plunger and hydraulic double diaphragm metering pumps designed according
INSTALLATION COMMISSIONING, OPERATION & MAINTENANCE MANUAL
WedgeRock RW Series Worm Gear Actuators INSTALLATION COMMISSIONING, OPERATION & MAINTENANCE MANUAL Revision 01 Date 4/3/17 Page 1 Table of Contents 1.0 INTRODUCTION... 4 1.1 PURPOSE... 4 1.2 AUDIENCE...
FlashCO2, CO2 at 23 $/ton
FlashCO2, CO2 at 23 $/ton A cost effective solution of capturing CO2 from Steam Methane Reforming (SMR) Hydrogen production plants by the FlashCO2 process Introduction to a cost effective solution Driven
Liquid Ring Compressors Engineered-to-Order Compressor Systems
Liquid Ring Compressors Engineered-to-Order Compressor Systems NASH Liquid Ring Compressor Systems Engineered-to-Order Liquid Ring Compressor Systems Unmatched experience Nash liquid ring compressors are
PKP Prozessmesstechnik GmbH. Borsigstrasse 24. D Wiesbaden-Nordenstadt. Tel: / Fax: / Operating Instructions
PKP Prozessmesstechnik GmbH Borsigstrasse 24 D-65205 Wiesbaden-Nordenstadt Tel: 06122 / 7055-0 Fax: 06122 / 7055 50 Operating Instructions PMR02 / PMR04 Bourdon Tube Pressure Gauge Contents 1 Introduction
CURI Pierside Stainless Diesel Tank
Mechanical Integrity Report for the CURI Pierside Stainless Diesel Tank at 208 North Palmetto Boulevard Clemson, South Carolina 29631 Inspection: 26 September 2012 Prepared by: George E. Matthews, E.I.T.
Record of Assessment OFFICER IN CHARGE OF AN ENGINEERING WATCH
Record of Assessment for OFFICER IN CHARGE OF AN ENGINEERING WATCH Candidate s Name Candidate s Signature NOTE TO QUALIFIED ASSESSOR(S): In performing your function as a Qualified, you may use your initials
Pipeline Pigging and Hydrostatic Test
Project Engineering Standard Solutions, Standards and Software www.klmtechgroup.com Page 1 of 20 Rev: 01 KLM #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama 81200 Johor Bahru Malaysia. KLM
Type Testing of Rising Stem Valves Equipped with Graphite Packing for Fugitive Emissions
Type Testing of Rising Stem Valves Equipped with Graphite Packing for Fugitive Emissions 1 Scope This standard specifies the requirements and acceptance criteria (100 ppmv) for fugitive emission type testing
QUALITY ASSURANCE SPECIFICATION NONDESTRUCTIVE EXAMINATION PAGE 1 OF 7
QUALITY ASSURANCE SPECIFICATION REVISION: 0 DATE: 08/29/14 NONDESTRUCTIVE EXAMINATION PAGE 1 OF 7 1.0 Purpose The purpose of this specification is to establish the minimum quality assurance requirements
ISO INTERNATIONAL STANDARD. Petroleum, petrochemical and natural gas industries Rotary-type positivedisplacement. Part 1: Process compressors
INTERNATIONAL STANDARD ISO 10440-1 Second edition 2007-08-01 Petroleum, petrochemical and natural gas industries Rotary-type positivedisplacement compressors Part 1: Process compressors Industries du pétrole,
Regulated Oil and Gas Companies under National Energy Board Jurisdiction
File 185-A000-41 8 August 2003 Regulated Oil and Gas Companies under National Energy Board Jurisdiction Dear Sir / Madam: Guidance Notes for Pressure Equipment under National Energy Board Jurisdiction
RELIEF VALVES. General Description
RELIEF VALVES FOR CONDENSER SERVICE General Description Graham Viking Valves are produced in three basic designs: Horizontal, Vertical and Angle. The Horizontal and Angle valves are available with various
VALVE MANUFACTURERS ASSOCIATION API 622 API 624
VALVE MANUFACTURERS ASSOCIATION API 622 API 624 Written by Rich Davis Manager Business Development Western Hemisphere & China Flexitallic L.P., Deer Park, Texas Presented By: Steve Butler, Shell Global
MSC Guidelines for Refrigeration Machinery
Procedure Number E1-32 Revision Date: 07/27/10 S. J. Kelly, CDR, Chief of Engineering Division References: a. 46 CFR Part 56.50-105 Low Temperature Piping b. 46 CFR Part 58.20 Refrigeration Machinery c.
ASYBCO 90 O ELBOW LONG RADIUS O.D. I.D.
90 O ELBOW LONG RADIUS Standard weight Extra strong Schedule 160 Double extra strong ASTM A-234 ASME / ANSI B16.9 Carbon and ferritic alloy steel Produced from X-rayed, stress-relieve welded pipe. Welds
STANDARD SPECIFICATION FOR SPLIT TEES (HOT TAP MATERIAL)
STANDARD SPECIFICATION FOR SPLIT TEES (HOT TAP MATERIAL) TEE (HOT TAPPING MATERIAL) S-04-02-040 Page 1 of 7 1.0 SCOPE This specification covers the basic requirements for the design, manufacture and supply
FLUID DYNAMICS Ch.E-204 Umair Aslam Lecturer Department of Chemical Engineering
FLUID DYNAMICS Ch.E-204 Umair Aslam Lecturer Department of Chemical Engineering Fluid Mechanics is the branch of physics that studies fluids (liquids, gases, and plasmas) and the forces on them. Fluid
DUPLEX TECHNICAL INFORMATION FABRICATED DUPLEX STRAINERS
DUPLEX STRAINER TECHNICAL INFORMATION - 119 - SCREEN OPENINGS 100 Mesh - 30% O.A. 0.006 Openings 80 Mesh - 36% O.A. 0.008 Openings 60 Mesh - 38% O.A. 0.010 Openings 40 Mesh - 41% O.A. 0.016 Openings 30
SABERINDO PACIF SABERINDO PACIFIC CIFIC SABERINDO PA. A Tyco International Company
CIF A Tyco International Company 1 Foam Concentrate CIF 3% AFFF -UL Listed -UL Canada Listed 6% AFFF 6 parts AFFF concentrate to 94 parts water -UL Listed- Foam Liquid -UL Canada Listed 3% FLUOROPROTEIN
Australian/New Zealand Standard
AS/NZS 3788:2006 AS/NZS 3788:2006 Australian/New Zealand Standard Pressure equipment In-service inspection AS/NZS 3788:2006 This Joint Australian/New Zealand Standard was prepared by Joint Technical Committee
Engineering Standard. Saudi Aramco DeskTop Standards
Engineering Standard 30 March 2005 Instrumentation Standards Committee Members Al-Awami. L.H., Chairman Tuin, R.R., Vice Chairman Al-Dakhil, T.K. Al-Dhafeeri, F.T. Al-Khalifa, A.H. Al-Madhi, F.A. Alqaffas,
WATER MADE EASY MARINE ENERGY MUNICIPAL INDUSTRIAL
Capital Controls Series 71V3000 The Series 71V3000 electrically-heated vaporizer automatically vaporizes and superheats liquid chlorine, sulfur dioxide or ammonia at a rate controlled by the gas feed system.
USE OF NONCONTACTING SEALS IN VOLATILE SERVICES
USE OF NONCONTACTING SEALS IN VOLATILE SERVICES by Bob Goodenberger Regional Engineer, South Central Region John Crane Inc. Webster, Texas Douglas E. Barron Reliability Analyst ChevronPhillips Chemical
V-Major, V-Compact. Reciprocating Compressors. Intelligent Air Technology
V-Major, V-Compact Reciprocating Compressors Intelligent Air Technology & Significant Energy Savings with Lower Running Costs Efficient. LOW POWER CONSUMPTION 75% of the running cost of an air compressor
Safety Engineering -Pressure Systems-
Safety Engineering -Pressure Systems- M. Jahoda Introduction Pressure Systems means a system comprising one or more pressure vessels of rigid construction, any associated piping and protective devices
API 510: Pressure Vessel Inspection Code (API Exam Preparation Training)
An Intensive 2-Week Training Course API 510: Pressure Vessel Inspection Code (API Exam Preparation Training) Maintenance, Inspection, Rating, Repair and Alteration 11-22 Aug 2019, Dubai 07-MAY-18 This
Anderson Greenwood Type 4142 piped away pressure relief valves
7 Anderson Greenwood Type 4142 piped away pressure relief valves High capacity weight or spring loaded pressure relief valves that pipe away to a closed header system. Designed to work closer to a tank's
Pressure Piping Code-Industrial Piping. Part 6: Safeguarding
ICS 23.040 J74 National Standard of the People's Republic of China GB/T 20801.6-2006 Pressure Piping Code-Industrial Piping Part 6: Safeguarding ffi1jtfil~ju1t1 I~tfil ~6$?t: ~~~1? Issued on: December
Installation of Ballast Water Management Systems
(Sept 2015) (Rev.1 May 2016) Installation of Ballast Water Management Systems 1. Application In addition to the requirements contained in BWM Convention (2004), the following requirements are applied to
Discussion on Fugitive Emissions Standards Rich Davis
Discussion on Fugitive Emissions Standards Rich Davis Business Development Manager Flexitallic LP Emissions Standards API 622 Type Testing of Process Valve Packing for Fugitive Emissions (under revision)
RUPTURE HAZARD OF PRESSURE VESSELS
United States Office of Solid Waste EPA 550-F-97-002a Environmental Protection and Emergency Response Agency (5104) RUPTURE HAZARD OF PRESSURE VESSELS The Environmental Protection Agency (EPA) is issuing
Relief Systems. 11/6/ Fall
Relief Systems 1 Relief Scenarios o A single relief event requires a particulate vent area and valve size o Relief scenarios are determined based on a PHA o For each scenario, a vent area is calculated
Guideline No.M-05(201510) M-05 AIR COMPRESSOR. Issued date: 20 October China Classification Society
Guideline No.M-05(201510) M-05 AIR COMPRESSOR Issued date: 20 October 2015 China Classification Society Foreword This Guideline constitutes the CCS rules, and establishes the applicable technical requirements
Training Title IDENTIFY OPERATIONAL UPSETS, REVIEW & VALIDATE IN OIL & CHEMICAL PLANTS
Training Title IDENTIFY OPERATIONAL UPSETS, REVIEW & VALIDATE IN OIL & CHEMICAL PLANTS Training Duration 5 days Training Venue and Dates Identify Operational Upsets, Review & Validate in Oil & Chemical
Right-Angle Tube Roller Model
SPECIFICATIONS Model no. Free Speed (RPM) Throttle Rotation Max. Torque Ft-Lb Air Pressure psi Air Inlet Hose Air Flow @Free Speed Spindle Weight 909-1700 95 Lever type Reversible 240 90 1/2 NPT 1/2 I.D.
Vertical and Horizontal Bladder Tanks
DATA SHEET Vertical and Horizontal Tanks Application The ANSUL bladder tank is one component in a balanced pressure proportioning system. Its operation requires no external power other than a pressurized
Diamond Engineering Works (India)
+91-8048737814 Diamond Engineering Works (India) https://www.safetyvalves.co.in/ We are reckoned as the pioneering Manufacturer and Supplier entity providing best in class range of Industrial Valves And
HEALTH AND SAFETY PROGRAM 201 HOT TAP PERMIT/FILLET WELD REPAIRS
Page 1 of 15 1.0 PURPOSE 1.1. Axiall, Plaquemine Complex, has developed this Hot Tap Permit Program to eliminate potential accidents, injuries, and to enhance employee protection. 1.2. To provide for the
The Feasibility of Flare Gas Recovery for Ethylene Plants Dr. John Joyce, PhD, PE
The Feasibility of Flare Gas Recovery for Ethylene Plants Dr. John Joyce, PhD, PE 3/7/16 Page 1 Flare Gas Recovery Concept and technology for flare gas recovery (FGR) has bloomed (especially compressor
THE PRESSURE NEWS GASKET FAILURE DURING HYDROSTATIC TEST IN THIS ISSUE: OVERPRESSURE PROTECTION FOR FIRE PROTECTION SYSTEMS SPRINKLER TANKS
THE PRESSURE NEWS Volume 14, Issue 3, September 2009 IN THIS ISSUE: Gasket Failure... 1 Overpressure Protection for Fire Protection System Sprinkler Tanks... 1 ABSA Board of Directors... 2 The 60th Annual
GUIDELINES FOR CONDUCTING HYDROGENATION REACTIONS
Page 1 of 5 GUIDELINES FOR CONDUCTING 1. Definition of Hydrogenation and Hydrogenolysis Reactions Hydrogenation reactions are synthetic transformations involving hydrogen, metallic catalysts (such as nickel,
Liquid Ring Compressors Engineered-to-Order Compressor Systems
Liquid Ring Compressors Engineered-to-Order Compressor Systems NASH Liquid Ring Compressors Greatest Performance Range of Liquid Ring Compressors Worldwide The ability to compress wet, saturated or dirty
WHEATLEY WHEATLEY SERIES 500 SWING CHECK VALVE. Installation, Operation and Maintenance Manual
WHEATLEY SERIES 500 SWING CHECK VALVE STANDARD INTEGRAL SEAT & OPTIONAL REMOVABLE SEAT 2" FP - 6" FP 150# - 1500# 8" FP - 12" FP 150# - 900# API 6D and B16.34 2" FP - 4" FP 5000# DRILLING PRODUCTION VALVE
PV4 and PV6 Piston Valves
1181250/1 IM-P118-05 ST Issue 1 PV4 and PV6 Piston Valves Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation 4. Commissioning 5. Operation 6.
INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS
INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS IAPMO GUIDE CRITERIA FOR WATER HEATER SUPPLY SHUTOFF VALVE WITH A / THERMAL EXPANSION CONTROL VALVE IGC 128-2006a8 1. PURPOSE 1.1 The purpose
Manual Actuated Boiler Blowdown Valves
Manual Actuated Boiler Blowdown Valves Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation 4. Operation 5. Maintenance 6. Spare parts p.1 1. Safety
PIP PNE00012 Piping Examination and Leak Test Guide
October 2017 Piping PIP PNE00012 Piping Examination and Leak Test Guide PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice has
Installation, Operation, and Maintenance Manual
Installation, Operation, and Maintenance Manual Welker Probe Instrument Regulator Model The information in this manual has been carefully checked for accuracy and is intended to be used as a guide for
SHOP WELDED TANKS STANDARD CONNECTIONS
STEEL WELDED TANKS Tanks are constructed using 3/16 and ¼ inch A36 material. Welding and testing are performed according to API 12F specifications. Shop welded tanks are also available in special sizes
Safety relief valves SFV 20-25
MAKING MODERN LIVING POSSIBLE Technical brochure Safety relief valves SFV 20-25 www.danfoss.com/ir Contents Page Introduction........................................................................................3
GREIG FILTERS, INC. OPERATION MANUAL
GREIG FILTERS, INC. OPERATION MANUAL MODEL DCFH 3P 15/3 100 S4 DOE/222 DUAL CARTRIDGE FILTER HOUSING TABLE OF CONTENTS I. INTRODUCTION II. CARTRIDGE FILTER HOUSING UNIT A. OPERATION B. INSTALLATION C.
Leak testing of Valves. Standards for acceptable Rates of Valve Leakage
Leak testing of Valves Standards for acceptable Rates of Valve Leakage American Petroleum Institute (API) The API standard 598: Valve Inspection and Testing, covers the testing and inspection requirements
Title: Pressure Relieving and Venting Devices Function: Ecology & Safety No.: BC Page: 1 of 7 Reviewed: 6/30/12 Effective: 7/1/12 (Rev.
Preparer: Team Member, North America, Process Safety Center of Expertise No.: BC032.020 Page: 1 of 7 Owner: Manager, North America Process Safety Center of Expertise Approver: Sr. Vice President, Ecology