2018 Exploration & Production Winter Standards Meeting January 22-26, 2018 Hyatt Regency San Antonio San Antonio, Texas
|
|
|
- Mildred Pearson
- 6 years ago
- Views:
Transcription
1 2018 Exploration & Production Winter Standards Meeting January 22-26, 2018 Hyatt Regency San Antonio San Antonio, Texas Current as of November 29, 2017 Subject to change Final program distributed onsite. Sunday, January 21, 2018 General Sponsor and Exhibitor Displays (Setup) 1:00 pm 4:00 pm Registration 1:00 pm 5:00 pm Subcommittee and Task Group Chairs Training 4:00 pm 6:00 pm SC 5 Steering Committee (Steering Committee Members Only) 6:00 pm 7:00 pm
2 Monday, January 22, 2018 General Welcome Breakfast and General Session 7:00 am 8:30 am Registration 7:00 am 4:00 pm Sponsor and Exhibitor Displays 7:00 am 5:00 pm Spouse s Breakfast 8:00 am 10:00 am (Tentative, time subject to change slightly) Morning Coffee Service 8:30 am 9:00 am Orientation for New Committee Members and First-Time Attendees 9:00 am 10:00 am Mid-Morning Coffee Service 10:00 am 10:30 am Afternoon Coffee Service 2:00 pm 2:30 pm Special Networking Break 2:30 pm 3:00 pm Subcommittee and Task Group Chairs Training 3:30 pm 5:30 pm SC 5 Opening Welcome and General Announcements 8:30 am 9:00 am Manufacturers Advisory Group (SC 5/MAG) 9:00 am 11:00 am WI 4212, RP 5L8 3 rd Edition Development (SC 5/TGLP) 11:00 am 12:00 pm
3 Monday, January 22, 2018 WI 7038, Double-Shoulder Connections (Spec 7-2) (SC 5/TGDSE)) 11:00 am 12:00 pm WI s 2360 & 2395, Stress Relief of Cold-Worked Ends & Re-Evaluation of PLSs for Spec 5CT (SC 5/TGOCTG) 11:00 am 12:00 pm Users Advisory Group (SC 5/UAG) WI 4235, Bearing Piece Location for Spec 5L (SC 5/TGLP) 3:00 pm 4:00 pm WI 4232, Moderate Sour Service for Spec 5L (SC 5/TGOCTG/RGPP) 3:00 pm 4:30 pm WI 2351 & 2398, Elevated Temperature (Spec 5CT) (SC 5/TGOCTG/RGPP) 3:00 pm 4:30 pm WI 2345, Coiled Tubing Performance Properties (SC 5/TGOCTG/RGCT) WI 3083, Connection FEA Workflow for RP 5C5 (SC 5/TGTGC) WI 4239, Mechanical Interference Fit (Spec 5L) (SC 5/TGLP) 4:00 pm 5:00 pm Cancelled Moved to Tuesday
4 Monday, January 22, 2018 WI 2390, Add C125 to Spec 5CT (SC 5/TGOCTG/RGSSP) 4:00 pm 5:00 pm WI 2353, Dimensional Mapping for Performance Properties (Spec 5CT) (SC 5/TGOCTG/RGPP) 4:30 pm 5:30 pm Subcommittee on Valves and Wellhead Equipment (SC 6) Subcommittee on Field Operating Equipment (SC 11) Subcommittee on Drilling Well Control Equipment API 6D Task Group, Pipeline Valves (SC 6) 1:00 pm 5:00 pm SC 11 Task Group Meetings 8:30 am 5:00 pm API 16AS Task Group, BOP Systems 8:30 am 12:00 pm API Task Group on S53 Blowout Prevention Equipment Systems for Drilling Wells 1:00 pm 5:00 pm
5 Tuesday, January 23, 2018 General Early Morning Coffee Service 7:00 am 8:30 am Registration 7:00 am 4:00 pm Sponsor and Exhibitor Displays 7:00 am 5:00 pm Spouse/Guest Breakfast 8:00 am 10:00 am (Tentative, time subject to change slightly) Technical Session 9:30 am 11:30 am Mid-Morning Coffee Service 10:00 am 10:30 am Afternoon Coffee Service 2:00 pm 2:30 pm Special Networking Break 2:30 pm 3:00 pm Subcommittee and Task Group Chairs Training WI 2397, Spec 5CT Hardness and NACE MR0175 Ballot (SC 5/TGOCTG/RGSSP) 8:00 am 9:00 am WI 2380, Spec 5CT 10th Edition Development (SC 5/TGOCTG) 8:00 am 10:00 am
6 Tuesday, January 23, 2018 WI 3083, Connection FEA Workflow for RP 5C5 (SC 5/TGTGC) 8:00 am 10:00 pm WI s 1064, 3066, 3078, and 3079 for Thread Compounds (RP 5A3) (SC 5/TGTGC/TGOCTG/TGDSE) 8:00 am 10:00 am WI 4223, Fatigue Equation Development (RP s 5L1 and 5LW) (SC 5/TGLP) 8:00 am 10:00 am Resource Group on Coiled Tubulars (SC 5/RGCT) 8:00 am 12:00 pm WI's 2384 & 2391, Spec 5CT Annex I Requirements and Thread Protector Impact Test Methodology (SC 5/TGOCGT/TGTGC) 10:00 am 12:00 pm WI 4240, Chemistry Changes to HTP for Spec 5L (SC 5/TGLP) 10:00 am 12:00 pm WI s 1066, 2284, 2366, and 2411 for Spec 5CRA, Addition of Ni-Based Alloys (SC 5/TGOCTG/TGLP/RGSSP) 10:00 am 12:00 pm WI 2389, Review TR 5C3 Annex G Analysis for Evaluating Small Data Sets (Spec 5CT) (SC 5/TGTGC) 10:00 am 12:00 pm WI 7040, Spec 5DP 2 nd Edition Development (SC 5/TGDSE) 10:00 am 12:00 pm
7 Tuesday, January 23, 2018 WI 2419, Pre-Cracking Requirements for 5CT SR39 for C110 (and potential other grades) (SC 5/TGOCTG/RGPP). 11:00 am 12:00 pm WI 2408, Update Annex D for TR 5C3, Technical Report-Out on PRAC III Project (Includes WI s 2315, 2318A, 2352, 2386) (SC 5/TGOCTG/RGSSP) WI 2381, Charpy Energy Requirements (Spec 5CT) (SC 5/TGOCTG) WI 7001, RP 7G-1 (7G Revision) (SC 5/TGDSE) Resource Group on NDT (SC 5/RGNDT) WI 2413, DCB Side Grooves for Spec 5CT (SC 5/TGOCTG) 3:00 pm 4:00 pm WI 7030, RP 7G-2 Second Edition Maintenance (SC 5/TGDSE) WI 4234, Coiled Line Pipe (Spec 5LCP) Maintenance (SC 5/TGLP/RGCT)
8 Tuesday, January 23, 2018 WI 3081, Connection Testing Methods for MFHW Low-Cycle Fatigue (SC 5/TGTGC) WI 1069, Harmonize NDE Personnel Certification in Spec s 5CT, SCRA, and 5L (SC 5/TGOCTG/TGLP/RGNDT) WI 2400, Acceptance Criteria for C110 for Method D (Spec 5CT) (SC 5/TGOCTG/RGSSP) 4:00 pm 5:00 pm WI 2405, Hydrotesting Heavy Wall Tubulars (Spec 5CT) (SC 5/TGOCTG) 4:00 pm 5:00 pm WI 2416, Collapse Equations in TR 5C3 for 5L Pipe (SC 5/TGOCTG/RGPP 5:00 pm 6:00 pm
9 Tuesday, January 23, 2018 Subcommittee on Valves and Wellhead Equipment (SC 6) Subcommittee on Oil Well Cements (SC 10) Subcommittee on Field Operating Equipment (SC 11) Subcommittee on Drilling, Completion, and Fracturing Fluids (SC 13) API 6A Task Group, Wellhead and Christmas Tree Equipment 8:00 am 12:00 pm Oil Well Cements (SC 10) 8:00 am 5:00 pm SC 11 Task Group Meetings 8:30 am 5:00 pm Drilling, Completion, and Fracturing Fluids (SC 13) 8:00 am 5:00 pm
10 Tuesday, January 23, 2018 Subcommittee on Drilling Well Control Equipment API 16FR Task Group, Repair & Remanufacture of Marine Drilling Riser Equipment 8:00 am 12:00 pm API 16B Task Group, Coiled Tubing, Snubbing, and Wireline Well Control Stack Equipment 8:00 am 12:00 pm API 16C Task Group, Choke and Kill Systems 1:00 pm 5:00 pm API 16ST Task Group, Coiled Tubing Well Control Equipment Sysytems 1:00 pm 5:00 pm Subcommittee on Completion Equipment (SC 19) Subcommittee on Materials (SC 21) Subcommittee on Completion Equipment (SC 19) 9:00 am 5:30 pm Pipeline Flange and Fitting Work Group (SC 21) Task Group on Bolting Issues (SC 21) 1:30 pm 3:30 pm
11 Wednesday, January 24, 2018 General Committee on Standardization of Oilfield Equipment and Materials (CSOEM) Early Morning Coffee Service 7:00 am 8:30 am Registration 7:00 am 3:00 pm Sponsor and Exhibitor Displays 7:00 am 5:00 pm Mid-Morning Coffee Service 10:00 am 10:30 am Afternoon Coffee Service 2:00 pm 3:00 pm API Reception 6:00 pm 7:30 pm CSOEM Research & Budget Meeting (Committee Members and Invited Guests Only) 9:00 am 12:00 pm WI 4228, RP 5L3 Working Group (SC 5/TGLP) 8:00 am 10:00 am WI 3065, RP 5B1 6 th Edition Development (SC 5/TGTGC) 8:00 am 10:00 pm
12 Wednesday, January 24, 2018 WI 7022, Spec 7-1 Revision (SC 5/TGDSE) 8:00 am 10:00 am Resource Group on Sour Service Products (SC 5/RGSSP) 8:00 am 10:30 am WI 7041, Working Gauge Calibration for Spec 7-2 (SC 5/TGDSE/TGTGC) 10:00 am 11:00 am Line Pipe Global Industry Standards Liaison Group (SC 5/TGLP) 10:00 am 11:00 am Spec 5B Maintenance (SC 5/TGTGC) 10:00 am 11:00 am WI 2403, Simulated PWHT Requirements (RP 5C6) (SC 5/TGOCTG) 10:00 am 11:00 am Resource Group on Performance Properties (SC 5/RGPP) 10:30 am 12:00 pm WI 2407 Positive Material Identification for Spec 5CRA (SC 5/TGOCTG/RGSSP) 11:00 am 12:00 pm
13 Wednesday, January 24, 2018 Subcommittee on Valves and Wellhead Equipment (SC 6) WI 4232, Moderate Sour Service for Spec 5L Pipe (SC 5/TGLP/RGSSP) 11:00 am 12:00 pm WI 4235, Bearing Piece Location for Spec 5L (SC 5/TGLP) 11:00 am 12:00 pm WI 2414, Oblique Angle Requirement in Spec 5CT (SC 5/TGOCTG/RGNDT) WI 4241, Spec 5L 46 th Edition Development (SC 5/TGLP) Task Group on Oil Country Tubular Goods (SC 5/TGOCTG) Subcommittee 6 on Valves and Wellhead Equipment (SC 6) 8:00 am 2:00 pm Cancelled
14 Wednesday, January 24, 2018 Subcommittee on Oil Well Cements (SC 10) Subcommittee on Field Operating Equipment (SC 11) Subcommittee on Drilling, Completion, and Fracturing Fluids (SC 13) Subcommittee on Fiberglass and Plastic Tubulars (SC 15) Oil Well Cements (SC 10) 8:00 am 5:00 pm Subcommittee on Field Operating Equipment (SC 11) 8:30 am 12:00 pm SC 11 Task Group Meetings 1:00 pm 5:00 pm Drilling Completion, and Fracturing Fluids (SC 13) 8:00 am 5:00 pm Task Group on Fiberglass Line Pipe and Tubulars (SC 15/TG 1) 8:00 am 5:00 pm Thermoplastic Liners (SC 15/TG 3) 8:00 am 5:00 pm
15 Wednesday, January 24, 2018 Subcommittee on Drilling Well Control Equipment Subcommittee on Materials (SC 21) API 16A Task Group, Drill-Through Equipment 8:00 am 12:00 pm API 16D Task Group, Control Systems for Drilling Control and Diverter Equipment API 16AR Task Group, Repair/Remanufacture of Drill-Through Equipment Subcommittee on Materials 1:30 pm 5:00 pm
16 Thursday, January 25, 2018 General Early Morning Coffee Service 7:00 am 8:30 am Registration 7:00 am 10:00 am Mid-Morning Coffee Service 10:00 am 10:30 am Afternoon Coffee Service 2:00 pm 3:00 pm API Monogram / APIQR Forum Task Group on Threading, Gauging, and Compounds 8:00 am 10:00 am Task Group on Line Pipe 8:00 am 12:00 pm Task Group on Drill Stem Elements (SC 5/TGDSE) 10:00 am 12:00 pm SC 5 Planning Meeting (Steering Committee Members Only) 1:00 pm 2:00 pm 2:00 pm 4:00 pm
17 Thursday, January 25, 2018 Subcommittee on Oil Well Cements (SC 10) Subcommittee on (SC 11) Subcommittee on (SC 15) Subcommittee on Subcommittee on Quality Standards (SC 18) Subcommittee on Supply Chain Management (SC 20) SC 10, Follow-Up Working Session 8:00 am 5:00 pm SC 11 Task Group Meetings 1:00 pm 5:00 pm Fiberglass and Plastic Tubulars (SC 15) 8:00 am 5:00 pm SC 16 Steering Committee (Subcommittee officers and Invited Guests Only) 8:00 am 10:00 am Subcommittee 16, Subcommittee on Drilling Well Control Systems 1:00 pm 5:00 pm Subcommittee on Quality Standards Subcommittee on Supply Chain Management (SC 20) 8:30 am 12:00 pm
18 Friday, January 26, 2018 Committee on Standardization of Oilfield Equipment and Materials (CSOEM) CSOEM Governance Meeting (Budget and SC Reports) (Committee Members, Subcommittee Officers and Invited Guests Only) 8:00 am 12:00 pm CSOEM Executive Committee (Voting Members and Representatives Only) 1:00 pm 5:00 pm
Final Program. Sunday, June 10, General
2018 Exploration & Production Standards Conference on Oilfield Equipment and Materials June 11-15, 2018 Sheraton Denver Downtown Denver, Colorado www.api.org Current as of June 12, 2018 Subject to change
2016 Fall Refining and Equipment Standards Meeting
2016 Fall Refining and Equipment Standards Meeting November 14-17, 2016 Hyatt Regency New Orleans New Orleans, Louisiana www.api.org/meetings Current as of October 18, 2016 Subject to change Pre- & Post-Week
2018 Spring Refining and Equipment Standards Meeting
2018 Spring Refining and Equipment Standards Meeting April 16-19, 2018 Sheraton Seattle Hotel Seattle, Washington www.api.org/meetings Current as of March 25, 2018 Subject to change SOME Pre- & Post-Week
2018 Fall Refining and Equipment Standards Meeting FINAL PROGRAM
2018 Fall Refining and Equipment Standards Meeting FINAL PROGRAM November 12-15, 2018 Hyatt Regency Orlando Orlando, Florida www.api.org/meetings Current as of November 11, 2018 Subject to change SOME
2016 Spring Committee on Petroleum Measurement Standards Meeting March 14-18, 2016 Hyatt Regency Dallas at Reunion Dallas, Texas
2016 Spring Committee on Petroleum Measurement Standards Meeting March 14-18, 2016 Hyatt Regency Dallas at Reunion Dallas, Texas www.api.org/meetings Current as of February 23, 2016 Subject to change Final
8:30 am 10:00 am Calculation of Petroleum Prover Quantity Calibration (COLM Ch. 12.4)
2018 Fall Committee on Petroleum Measurement Standards Meeting October 8-12, 2018 Hyatt Regency San Francisco San Francisco, California www.api.org/meetings Current as of August 6, 2018 Subject to change
DE149. Wireline Servicing, Fishing Job for Completion and Workover
DE149 Wireline Servicing, Fishing Job for Completion and Workover H.H. Sheik Sultan Tower (0) Floor Corniche Street Abu Dhabi U.A.E www.ictd.ae ictd@ictd.ae Course Introduction: This five-day course is
2015 Spring Refining and Equipment Standards Meeting
2015 Spring Refining and Equipment Standards Meeting April 13-16, 2015 Sheraton Seattle Hotel Seattle, Washington Pre- and Post-Week Meetings: April 11-12 and April 16-17, 2015 Program (Current as of April
NORSOK STANDARD SYSTEM REQUIREMENTS BOP, DIVERTER AND DRILLING RISER SYSTEM (SYSTEM NO.: 12-30, 12-40)
NORSOK STANDARD SYSTEM REQUIREMENTS BOP, DIVERTER AND DRILLING RISER SYSTEM (SYSTEM NO.: 12-30, 12-40) Rev.1, Dec. 1994 CONTENTS 1 FOREWORD 2 2 SCOPE 2 3 NORMATIVE REFERENCES 2 4 DEFINITIONS AND ABBREVIATIONS
Current as of March 15, 2019 Subject to change Any changes to this program will be updated in the meeting app.
2019 Spring Committee on Petroleum Measurement Standards Meeting March 18-22, 2019 Hyatt Regency Dallas Dallas, Texas www.api.org/meetings Current as of March 15, 2019 Subject to change Any changes to
DRILLING HOSE SOLUTIONS
DRILLING HOSE SOLUTIONS HIGH PRESSURE FLEXIBLE LINES FOR A WIDE RANGE OF DRILLING APPLICATIONS HIGH QUALITY - HIGH STANDARD WE DELIVER ACCORDING TO THE HIGHEST LEVELS OF SPECIFICATIONS AND STANDARDS WITH
ASME BOILER CODE WEEK AND PRESSURE VESSEL CODE WEEK May 5-10, 2019 Grand and Little America Hotels, Salt Lake City, Utah
ASME BOILER CODE WEEK AND PRESSURE VESSEL CODE WEEK May 5-10, 2019 Grand and Little America Hotels, Salt Lake City, Utah ***The schedule is subject to change. Please pick up the most updated schedule onsite***
Success Paths: A Risk Informed Approach to Oil & Gas Well Control
API Winter E&P Standards Conference, Austin January 18, 2017 Success Paths: A Risk Informed Approach to Oil & Gas Well Control Dr. Dan Fraser Director, Strategic Alliances for Global Energy Solutions,
Statewide Rule 36: H2S
Statewide Rule 36: H2S Sam Birdwell, State H2S Coordinator August 2018 RRC Jurisdiction Oil and natural gas industry Intrastate Pipelines, natural gas and hazardous liquid pipeline industry Liquefied Petroleum
Engineered solutions for complex pressure situations
SPECIAL SERVICES Engineered solutions for complex pressure situations Cudd Energy Services (CES) delivers custom engineered solutions to resolve complex pressure situations resulting from equipment failure
WellCAP IADC WELL CONTROL ACCREDITATION PROGRAM
WellCAP IADC WELL CONTROL ACCREDITATION PROGRAM WELL SERVICING OPERATIONS (WIRELINE, COILED TUBING & SNUBBING) CORE CURRICULUM AND RELATED FORM WCT-2WSI INTRODUCTORY LEVEL For information on how an course
Flange Bolt Torquing. for Resistoflex Plastic-Lined Piping Products. Torquing. Retorquing. Hydrotesting. Annual retorquing
Flange Bolt Torquing for Resistoflex Plastic-Lined Piping Products Torquing When assembling flange connections, always use a full complement of clean, new high strength A193-B7 bolting. If using stainless
International Well Control Forum. Well Intervention Pressure Control Level 2 Syllabus July 2015 Version 7.0
International Well Control Forum Well Intervention Pressure Control Level Syllabus July 01 Version 7.0 Well Intervention Pressure Control Syllabus - Level Contents Guidance Notes... 1. OVERVIEW... 1.1.
Event Time Event Name Meeting Room Sunday, January Monday, January
Event Time Event Name Meeting Room Sunday, January 25 2015 Opens @ 12:00 PM - 06:00 PM Registration Opens @ 12:00 PM - 06:00 PM ASME Office 01:00 PM - 03:00 PM CNC Task Group on NQA-1 Part II Checklist
RPSEA UDW Forum June 22 & 23, Secure Energy for America
RPSEA UDW Forum June 22 & 23, 2010 Secure Energy for America PROJECT TEAM RPSEA Operator Advisory Committee Anadarko Chevron Shell ConocoPhillips Subcontractors IntecSea NOV CTES General Marine Contractors
PIP PNE00012 Piping Examination and Leak Test Guide
October 2017 Piping PIP PNE00012 Piping Examination and Leak Test Guide PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice has
5k Slickline Lightweight Pressure Control Equipment 4 ID
5k Slickline Lightweight Pressure Control Equipment 4 ID Table of Contents 5k Slickline Lightweight Pressure Control Equipment 4 ID... 1 Hydraulic Slickline Stuffing Box... 3 Wireline Lubricators... 4
3(752/(80 SPECIALTY 3(752/(80 SPECIALTY 5(17$/,1& 5(17$/,1&
KWIK~CONTROL SSV/SCSSV Remote Control CONTROL PANEL Used During Down Hole Operations for Running Long Bottom Hole Assembly (Screens, Blank Pipe, etc) to Give Operator Control in the Immediate Vicinity
API RP 2D sect C.4.1.2: 4-yearly load test of BOP crane to SWL +5 Ton and NDT inspection post load test.
API Commonly Used & Relevant Spec's & RP notes: API RP 2D sect C.4.1.2: 4-yearly load test of BOP crane to SWL +5 Ton and NDT inspection post load test. API Spec 4F: Crown Block Data Plate section 4.4.4.
CHE Well Testing Package/Service:
CHE Well Testing Package/Service: CHE delivers well testing package And services, trailer mounted well testing package and offshore/onshore well testing services with over 10 years experience. Our testing
RECOMMENDATION FOR INTERCHANGEABLE FLANGED DRILLING CHOKE DIMENSIONS
RECOMMENDATION FOR INTERCHANGEABLE FLANGED DRILLING CHOKE DIMENSIONS TECHNICAL REPORT TR0601 AWHEM publications may be used by anyone desiring to do so. Every effort has been made by the Association to
Drilling Blowout Prevention Requirements and Procedures
Directive 036 Release date: January 31, 2018 Effective date: January 31, 2018 Replaces previous edition issued February 2006. Drilling Blowout Prevention Requirements and Procedures The Alberta Energy
Cased-Hole Logging Environment
Cased-Hole Logging Environment 2 Planning a Production Logging Job Planning is an important part of a production logging job. Frequently these jobs can only be done in safety during daylight. Thus, the
2018 TAC SPRING TECHNICAL MEETINGS PROGRAM April ~ Ottawa, Ontario
04/19/2018 2018 TAC SPRING TECHNICAL MEETINGS PROGRAM April 18-23 ~ Ottawa, Ontario N.B.: Abbreviations: Program activities are being held at the Shaw Centre and the Novotel Ottawa Hotel. Registration
Subsea Wellhead and Conductor Fatigue
Subsea Wellhead and Conductor Fatigue 29th January 2014 Simeon Powell, PE Importance of Wellhead Fatigue Fatigue failure of high pressure wellhead housing Due to VIV West of Shetland Region 440 meter water
Welcome to the LESER Seminar, Taipei 28. June Design_of_safety_relief_valves_250804_Cal
Welcome to the LESER Seminar, Taipei 28. June 2006 1 Design of safety relief valves 2 Design of safety valves Target Classification of Pressure Relief Devices General design of Safety Relief valves 3 Design
TARPON A Minimal Facilities Platform
TARPON A Minimal Facilities Platform Contents Introduction TARPON Description TARPON Features TARPON Benefits TARPON Proofs TARPON Typical Installation Options Design Codes & Certification Novel Application
Texas Administrative Code
TITLE 16 PART 1 CHAPTER 3 RULE 3.13 Texas Administrative Code ECONOMIC REGULATION RAILROAD COMMISSION OF TEXAS OIL AND GAS DIVISION Casing, Cementing, Drilling, Well Control, and Completion Requirements
Chapter 5 Drilling and Well Testing Practices
Chapter 5 Drilling and Well Testing Practices Drilling and Well Testing Practices Activities in rotary drilling, completing, testing and maintaining a well. Health and safety requirements shall be covered
NBIC Committee Action Block
NBIC Committee Action Block Subject File Number Change of Service NB 08 0321 (Inspec) NB 08 0320 (Install) NB 08 0322 (R & A) Prop. on Pg. Proposal Explanation Part 2: Add a new Supplement 9, Requirements
Successful Deployment of a Long Gun String Via Intelligent Coiled Tubing
Successful Deployment of a Long Gun String Via Intelligent Coiled Tubing Parry Hillis: Technical Manager BakerHughes David Ayre: BP Well Perforation Specialist Jim Gilliat: TCP/DST Business Development
Cameron MBS Multi-Bowl Wellhead System
Cameron MBS Multi-Bowl Wellhead System MBS Multi-Bowl Wellhead System Tubing Head Adapter Tubing Hanger Upper Casing Spool Pack-off Bushing Emergency Slip and Seal Assembly Lower Casing Head Standard MBS
Captains Meeting 2009 Introduction to Well Testing- Expro. Edwin Schoorl
Captains Meeting 2009 Introduction to Well Testing- Expro Edwin Schoorl Agenda Oil and Gas presence Well construction Well testing Welltest System Welltest Equipment Welltest Video Questions Oil and gas
SPE Forum: Source Control for Wells in Shallow Water. Lars Herbst, Gulf of Mexico Regional Director
SPE Forum: Source Control for Wells in Shallow Water Lars Herbst, Gulf of Mexico Regional Director Agenda Introduction and Background Historical Well Control Events Scope of Discussion Scenario Driven
API SC 6 SUBCOMMITTEE ON VALVE AND WELLHEAD EQUIPMENT TASK/WORK GROUP STATUS REPORT. 6D/6DSS TG02 on Revisions & Corrections FEBRUARY 8, 2011
API SC 6 SUBCOMMITTEE ON VALVE AND WELLHEAD EQUIPMENT TASK/WORK GROUP STATUS REPORT 6D/6DSS TG02 on Revisions & Corrections FEBRUARY 8, 2011 TABLE OF CONTENTS 1. SCOPE OF WORK... 1-1 2. PREVIOUS STATUS
NORSOK Standard D-010 Rev 4, August 2012
Foreword 2 Introduction 2 1 Scope 4 2 Normative and informative references 4 2.1 Normative references 4 2.2 Informative references 5 3 Terms, definitions and abbreviations 5 3.1 Terms and definitions 6
T e l N o : F a x N o : E m a i l : a i s h c m c - m e. c o m w w w. c m c - m e.
MU047: Practical Valve Technology: Selection, Installation, Upgrading, Inspection & Troubleshooting MU047 Rev.002 CMCT COURSE OUTLINE Page 1 of 7 Training Description: This five-day intensive course covers
AUSTRALIA ARGENTINA CANADA EGYPT NORTH SEA U.S. CENTRAL U.S. GULF. SEMS HAZARD ANALYSIS TRAINING September 29, 2011
AUSTRALIA ARGENTINA CANADA EGYPT NORTH SEA U.S. CENTRAL U.S. GULF SEMS HAZARD ANALYSIS TRAINING September 29, 2011 Purpose The purpose of this meeting is to provide guidelines for determination of hazard
Standard Operating Procedures
Standard Operating Procedures GlassBore and GlassLine EUE 8RD Tubular Goods Composite Lining Systems Focus on Safety and Quality COMPOSITE LINING SYSTEMS Table of Contents Section 1 page 3 Arrival on Production
Blowout Prevention Equipment Systems for Drilling Wells
Ballot Draft 2 Blowout Prevention Equipment Systems for Drilling Wells API STANDARD 53 FOURTH EDITION, XXX 201X This draft is for committee balloting purposes only. This document is not an API Standard;
Subsea Safety Systems
Subsea Safety Systems The ELSA-HP has been developed to service the high pressure horizontal tree completion and intervention market. With systems designed and qualified up to 15,000 psi, 250 degf and
THE PROCESS OF JOINT INTEGRITY
BOLTED JOINTS A.333 THE PROCESS OF JOINT INTEGRITY To assist in managing a process, ask yourself the following questions: why, what, who, and how? Why do we need a Flange Joint Integrity program? This
IRP 5 : Minimum Wellhead Requirements An Industry Recommended Practice (IRP) for the Canadian Oil and Gas Industry
5 : Minimum Wellhead Requirements An Industry Recommended Practice () for the Canadian Oil and Gas Industry EDITION: 3 SANCTION DATE: June 20, 2018 Copyright/Right to Reproduce Copyright for this Industry
WellCAP IADC WELL CONTROL ACCREDITATION PROGRAM
WellCAP IADC WELL CONTROL ACCREDITATION PROGRAM WIRELINE OPERATIONS CORE CURRICULUM AND RELATED FORM WCT-2WLF FUNDAMENTAL LEVEL The purpose of the core curriculum is to identify a body of knowledge and
APPENDIX A1 - Drilling and completion work programme
APPENDIX A1 - Drilling and completion work programme Information about the well and drilling To the extent possible, the international system of units (SI) should be adhered to, and the drilling programme
Date of Issue: July 2016 Affected Publication: API Specification 16C, Choke and Kill Equipment, Second Edition, March 2015 ADDENDUM 1
Date of Issue: July 2016 Affected Publication: API Specification 16C, Choke and Kill Equipment, Second Edition, March 2015 ADDENDUM 1 Page 16, Section 4.6, delete the entire section and renumber all subsequent
Casing Design. Casing Design. By Dr. Khaled El-shreef
Casing Design By Dr. Khaled El-shreef 1 Casing Design CONTENTS Function of Casing Casing Types & Tools Strength Properties Casing Specification Casing Design 2 1 RUNNING AND CEMENTING CASING Reasons for
IRP 5 : Minimum Wellhead Requirements An Industry Recommended Practice (IRP) for the Canadian Oil and Gas Industry Volume
5 : Minimum Wellhead Requirements An Industry Recommended Practice () for the Canadian Oil and Gas Industry Volume 5 2018 EDITION: 3 SANCTION DATE: INSERT DATE HERE Copyright/Right to Reproduce Copyright
GAS LIFT IN NEW FIELDS
GAS LIFT IN NEW FIELDS GAS LIFT in NEW FIELDS NEW DESIGN FOR WELLS AND COMPRESSORS RESERVOIR AND PRODUCTION SIMULATION MATCHING REQUIRED PRODUCTION NODAL ANALYSIS SIMULATION USED TO SELECT INJECTION DEPTH
Recommended Practice for Performance Testing of Cementing Float Equipment
Recommended Practice for Performance Testing of Cementing Float Equipment API Recommended Practice 10F Third Edition, April 2002 ANSI/API 10F/ISO 10427-3: 2003 ISO 10427-3: 2003 Petroleum and natural gas
Module No. # 04 Lecture No. # 3.1 Case studies (continued) (Refer Slide Time: 00:10)
Health, Safety and Environmental Management in Petroleum and offshore Engineering Prof. Dr. Srinivasan Chandrasekaran Department of Ocean Engineering Indian Institute of Technology, Madras Module No. #
Fluid Sealing Association
Fluid Sealing Association STANDARD FSA-PSJ-701-06 PIPING SYSTEMS NON-METALLIC EXPANSION JOINT HYDROTESTING AND VACUUM TESTING 994 Old Eagle School Road, Suite 1019 Wayne, Pennsylvania 19087-1866 Phone:
This document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 16148 Second edition 2016-04-15 Gas cylinders Refillable seamless steel gas cylinders and tubes Acoustic emission examination (AT) and follow-up ultrasonic examination (UT) for
Safety and Risk Engineering. HSE Case Implementation Clive Rawson
Safety and Risk Engineering HSE Case Implementation Clive Rawson Purpose ALARP Risk Assessment Major Accident Events Bowties Safety Critical Systems Performance Standards Implementation Getting HSE Case
Drilling Blowout Prevention Requirements and Procedures
Directive 036 Drilling Blowout Prevention Requirements and Procedures February 16, 2006 Effective January 1, 2008, the Alberta Energy and Utilities Board (EUB) has been realigned into two separate regulatory
VortexFlow DX (Downhole) Tool Installation Instructions
VortexFlow DX (Downhole) Tool Installation Instructions www.vortextools.com Page 1 of 10 The VortexFLOW tools are based upon Technology that is a result of U.S.A. patents 6,151,751; 6,659,118; 6,749,374;
Perforating Options Currently Available in Horizontal Shale Oil and Gas Wells. Kerry Daly, Global BD Manager- DST TCP
MENAPS 2013 Perforating Options Currently Available in Horizontal Shale Oil and Gas Wells Kerry Daly, Global BD Manager- DST TCP MENAPS 13-17 WELL FLOW MANAGEMENT TM Scope/ Contents: MENAPS 13-17 Study
ASPIRE for Integrity Management Support for Upstream Assets. Payam Jamshidi, TWI Ltd Sebastian Hartmann, Innospection Ltd
ASPIRE for Integrity Management Support for Upstream Assets Payam Jamshidi, TWI Ltd Sebastian Hartmann, Innospection Ltd OVERVIEW - Discussion of corroded pipe assessment procedures under combined loading
RULE 36 & H 2 S SAFETY
OUTLINE OF RULE 36 RULE 36 & H 2 S SAFETY RULE 36 IS A SAFETY RULE DESIGNED TO PROTECT THE GENERAL PUBLIC FROM THE HAZARDS OF H 2 S RESULTING FROM INTENTIONAL AND ACCIDENTAL RELEASES. PROPERTIES OF H 2
VALVE MANUFACTURERS ASSOCIATION API 622 API 624
VALVE MANUFACTURERS ASSOCIATION API 622 API 624 Written by Rich Davis Manager Business Development Western Hemisphere & China Flexitallic L.P., Deer Park, Texas Presented By: Steve Butler, Shell Global
A New Thermoplastic Composite Riser for Deepwater Application
A New Thermoplastic Composite Riser for Deepwater Application Martin van Onna, Managing Director Airborne Composite Tubulars Patrick O Brien, Group Director Strategic Business & Marketing, Wood Group Kenny
RP 6.0: INSPECTION AND CERTIFICATION OF BLOWOUT PREVENTERS
RP 6.0: INSPECTION AND CERTIFICATION OF BLOWOUT PREVENTERS A Recommended Practice (RP) for the Canadian Land-Based Drilling and Well Servicing Industry EDITION: 3 SANCTION DATE: December 9, 2015 CANADIAN
Deepwater Horizon Incident Internal Investigation
Not all Information has been verified or corroborated. Subject to review based on additional information or analysis. Deepwater Horizon Incident Internal Investigation 1 Areas of Discussion Investigation
PROPOSED NEW SUB- CODE 1 RIG UP AND TEAR. Possibly Fits into Existing Code. 7/26/2018 Review PROPOSED NEW CODE EXISTING OPERATION
NW NW 1 RIG UP AND TAR 1 no sub-code RIG UP AND TAR DOWN Start: Rig released from previous well, nd: Rig fully rigged up, acceptance tests successfully completed, and signed off. DOWN 1 1 Rig Under Tow
Discussion on Fugitive Emissions Standards Rich Davis
Discussion on Fugitive Emissions Standards Rich Davis Business Development Manager Flexitallic LP Emissions Standards API 622 Type Testing of Process Valve Packing for Fugitive Emissions (under revision)
NORSOK STANDARD DRILLING & WELL OPERATIONS
NORSOK STANDARD DRILLING & WELL OPERATIONS D-010 This NORSOK standard is developed by NTS with broad industry participation. Please note that whilst every effort has been made to ensure the accuracy of
Aging Cell, OFITE Style. Included Items
DRILLING FLUIDS EQUIPMENT For over 30 years OFI Testing Equipment (OFITE) has provided instruments and reagents for testing drilling fluids, well cements, completion fluids, and wastewater. In addition
American Society of Sanitary Engineering PRODUCT (SEAL) LISTING PROGRAM
American Society of Sanitary Engineering PRODUCT (SEAL) LISTING PROGRAM ASSE STANDARD #1003 - REVISED: 2009 Water Pressure Reducing Valves for Domestic Water Distribution Systems MANUFACTURER: CONTACT
Why Do Not Disturb Is a Safety Message for Well Integrity
Why Do Not Disturb Is a Safety Message for Well Integrity Presented at the Practical Well Integrity Conference 9-10 December, 2014 in Houston By Ron Sweatman, Principal Advisor, Reservoir Development Services,
WHEATLEY WHEATLEY SERIES 500 SWING CHECK VALVE. Installation, Operation and Maintenance Manual
WHEATLEY SERIES 500 SWING CHECK VALVE STANDARD INTEGRAL SEAT & OPTIONAL REMOVABLE SEAT 2" FP - 6" FP 150# - 1500# 8" FP - 12" FP 150# - 900# API 6D and B16.34 2" FP - 4" FP 5000# DRILLING PRODUCTION VALVE
IAPMO GUIDE CRITERIA FOR BALL VALVES IAPMO IGC PURPOSE
INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS IAPMO GUIDE CRITERIA FOR BALL VALVES IAPMO IGC 157-20067 1 PURPOSE 1.1 The purpose of this standard is to establish an acceptable standard
ISO 4081 INTERNATIONAL STANDARD. Rubber hoses and tubing for cooling systems for internal-combustion engines Specification
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 4081 Third edition 2010-06-01 Rubber hoses and tubing for cooling systems for internal-combustion engines Specification Tubes et tuyaux en caoutchouc
Changes for API 6A 21st Edition
Changes for API 6A 21st Edition Log of Submitted Changes API 6A TG 2 Revised October 29, 2013 Added Items 138,139,140 & 141 1. Casting and forgings MATERIALS - Provide additional guidance in Annex A proposed
Specification for Choke and Kill Equipment
Specification for Choke and Kill Equipment API SPECIFICATION THIRD EDITION, XXXX 2018 DRAFT 1 Choke and Kill Equipment 1 Scope This specification establishes the minimum requirements for the design and
INSTALLATION, MAINTENANCE & OPERATING INSTRUCTIONS 2-4 REDUCED PORT/ FULL PORT (5700/6700) ANSI CLASS 150/300/600/900/1500/2500 TRUNNION BALL VALVES
PBV-USA,Inc. 12735 Dairy Ashford. Stafford, Texas USA 77477 281-340-5400; 800-256-6193 FAX: 281-340-5499 INDUSTRIAL BALL VALVES IM0 69 April 2001 Rev 9 INSTALLATION, MAINTENANCE & OPERATING INSTRUCTIONS
W I L D W E L L C O N T R O L CIRCULATION & WELL CONTROL
CIRCULATION & WELL CONTROL Learning Objectives You will learn: The importance of pump rates and pressures during well control operations Pressure relationships Basic calculations necessary in well control
Hose related sections of API RP 7L Proposed changes for 2 nd Ed. draft 5 June 2018.
Hose related sections of API RP 7L Proposed changes for 2 nd Ed. draft 5 June 2018. Item 5202 stated that: API 7L hose sections need to be updated to accommodate the intended changes of hose sections of
DEPARTMENT OF ENVIRONMENTAL PROTECTION Office of Oil and Gas Management
DEPARTMENT OF ENVIRONMENTAL PROTECTION Office of Oil and Gas Management DOCUMENT NUMBER: 800-0810-003 TITLE: EFFECTIVE DATE: AUTHORITY: POLICY: PURPOSE: APPLICABILITY: DISCLAIMER: Guidelines for Development
INSTRUCTIONS FOR THE USE OF ROTARY DRILLING, VIBRATOR AND CEMENT HOSES
ContiTech Rubber Industrial Kft. Hose Technical Department HANDLING Page: 1/9 Date: 31.07.2008 Invalidate the document TKO AS3 rev.4 INSTRUCTIONS FOR THE USE OF ROTARY DRILLING, VIBRATOR AND CEMENT HOSES
COMPLETING AND SERVICING CRITICAL SOUR WELLS INDUSTRY RECOMMENDED PRACTICE (IRP) VOLUME SANCTIONED APRIL 2006
COMPLETING AND SERVICING CRITICAL SOUR WELLS INDUSTRY RECOMMENDED PRACTICE () VOLUME 2-2006 SANCTIONED APRIL 2006 PUBLISHED JANUARY 2007 This document as well as future revisions and additions are available
CRITICAL SOUR DRILLING
CRITICAL SOUR DRILLING AN INDUSTRY RECOMMENDED PRACTICE (IRP) FOR THE CANADIAN OIL AND GAS INDUSTRY IRP VOLUME 1 2008 SANCTION Edition 5 Sanction January Date 2004 Copyright/Right to Reproduce Copyright
Type Testing of Rising Stem Valves Equipped with Graphite Packing for Fugitive Emissions
Type Testing of Rising Stem Valves Equipped with Graphite Packing for Fugitive Emissions 1 Scope This standard specifies the requirements and acceptance criteria (100 ppmv) for fugitive emission type testing
COMMITTEE DRAFT. API 520 Part I 10 th Edition Ballot Item 2.1. This ballot covers the following item:
This ballot covers the following item: API 520 Part I 10 th Edition Ballot Item 2.1 2008 12 Modify guidance to PRV datasheets (Line 17) to assist user s with determining the temperature to use for selecting
BVM CORPORATION TYPE AAX TONG 55,000 FT/LBS. TORQUE Part number: Serial Number:
BVM CORPORTION TYPE X TONG 55,000 FT/LBS. TORQUE Part number: Serial Number: WRNING: Manual tongs which have experienced excessive wear or are found to have cracks should be replaced or repaired by BVM
API-510 PRESSURE VESSEL INSPECTOR
BODY OF KNOWLEDGE API-510 PRESSURE VESSEL INSPECTOR CERTIFICATION EXAMINATION July 2013 (Replaces July 2012) API Authorized Pressure Vessel Inspectors must have a broad knowledge base relating to maintenance,
DNVGL-OS-E101 Edition January 2018
OFFSHORE STANDARDS DNVGL-OS-E101 Edition January 2018 The electronic pdf version of this document, available free of charge from http://www.dnvgl.com, is the officially binding version. FOREWORD DNV GL
FAQ regarding NORSOK D-007 Revision 2
February 2016 FAQ regarding NORSOK D-007 Revision 2 Well testing system INTRODUCTION NORSOK standard D-007 Revision 2 was released in September 2013. The purpose of this document is to ensure uniform interpretation
Reply 2: See Reply 1.
LAST UPDATED: APRIL, 2018 Ed Section Question Answer 3rd 5.5.2 Background: Section 5.5.2 calls out the design verification testing requirements for blowout preventers. It only points to Section 5.7. i.e.,
TN-20/2007. Special Precautions for Fusing Saddle Fittings to Live PE Fuel Gas Mains Pressurized on the Basis of a 0.
TN-20/2007 Special Precautions for Fusing Saddle Fittings to Live PE Fuel Gas Mains Pressurized on the Basis of a 0.40 Design Factor Special Precautions for Fusing Saddle Fittings to Live PE Fuel Gas Mains
COSASCO 6000 PSI SINGLE ISOLATION SERVICE VALVE (FR) MAINTENANCE
COSASCO 6000 PSI SINGLE ISOLATION SERVICE VALVE (FR) MAINTENANCE 11841 Smith Avenue Santa Fe Springs, CA 90670 Tel: (562) 949-0123 (800) 635-6898 Fax: (562) 949-3065 www.cosasco.com Page: 2 of 26 Revision
Specification for Choke and Kill Equipment
Specification for Choke and Kill Equipment API SPECIFICATION THIRD EDITION, XXXX 2018 DRAFT 1 Choke and Kill Equipment 1 Scope This Specification identifies requirements for the performance, design, materials,
Well Control Drill Guide Example Only. Drill Guide is the list of drills, questions and attributes that are in DrillPad.
Well Control Drill Guide Example Only Drill Guide is the list of drills, questions and attributes that are in DrillPad. This Well Control Drill Guide will be used in conjunction with the rig-specific well
WellCAP IADC WELL CONTROL ACCREDITATION PROGRAM
WellCAP IADC WELL CONTROL ACCREDITATION PROGRAM WELL SERVICING OPERATIONS SNUBBING CORE CURRICULUM AND RELATED FORM WCT-2SS SUPERVISORY LEVEL The purpose of the core curriculum is to identify a body of
INTERPRETATION NOTE ISSUED UNDER THE PETROLEUM DRILLING REGULATIONS (CNR 1150/96)
BOP CLASSIFICATION SYSTEM FOR ONSHORE NEWFOUNDLAND AND LABRADOR INTERPRETATION NOTE ISSUED UNDER THE PETROLEUM DRILLING REGULATIONS (CNR 1150/96) PREPARED BY THE PETROLEUM RESOURCE DEVELOPMENT DIVISION
Blowout during Workover Operation A case study Narration by: Tarsem Singh & Arvind Jain, OISD
1. Introduction An incident of gas leakage from a well took place during workover operations. Subsequently, the gas caught fire on the fourth day in which twelve persons were injured. Two contract workers,