Service and Parts Manual Proportional Valves PVG 100 powersolutions.danfoss.com

Transcription

1 MAKING MODERN LIVING POSSIBLE Service and Parts Manual Proportional Valves PVG 100 powersolutions.danfoss.com

2 Contents Function PVG 100 sectional drawing...3 Installation Installation and plug orientation...4 Installation and identification...5 Maximum flow setting...-7 Connections...8 Tightening torques...8 Installation of lever...9 Pressure setting, PVP...9 Adjustment of PVE Installation and technical data for PVPP Pilot drain connection PVMR disassembly PVMR/F assembly Tightening torques and widths across flats Main spool assembly for PVMR Float spool assembly for PVMF PVPF, open center pump side module PVPE, PVPD and Pilot Shut Off PVPV - closed center pump side module PVPV - closed center pump side module with integrated priority function PVB, PVBZ, PVLA, and PVLP PVSI, PVT, and PVTI PVAS assembly kit for PVP with PVSI/PVT PVAS assembly kit for PVP with PVTI PVBS, main spool PVM, mechanical activation PVM, PVMD, PVH, PVMR, and PVMF cover Electrical activation with Hirschmann connector Electrical activation with AMP connector Seal kits for PVG

3 Function PVG 100 sectional drawing 1 LS comp. 13 LS pump 2 T port CF P port 3 4 LS ST T P 5 B A A 8 7 T P T B A B 12 T P T P10 002E 1. LS relief valve 2. LS connection 3. Priority spool for CF 4. LS connection for steering unit 5. Shuttle valve. Pilot operated check valve, POC 7. LS line 8. Logic cartridge for POC 9. Pressure compensator 10. Shock and suction valve, PVLP 11. Main spool, PVBS 12. Max. oil flow adjustment screws for ports A and B 13. LS comp (LS signal sent back to compensators) 3

4 Installation Installation and plug orientation Module of PVB L mm L in L 0 Nm [530 lbf in] 170* [.9] 170* [.9] 0 Nm [530 lbf in] A PVP 118 [4.5] T B P 100* [4] M12 x places 100* [4] * Room for dismantling P10 000E DIN mounting orientation 4

5 Installation and Identification Standard, oil flow direction and setting of max flow PVM to the right of PVP PVEA PVEH/ PVES PVEO PVMR/ PVMF PVMD PVH B A PVS P-A P-B PVB Q max: P B Identification PVM 7-9 Nm [1-79 lbf in] Q max: P A PVP Q max. B Q max. A Q max. A Q max. B A Week of manufacture Year of manufacture Day of the week (A = Monday, B = Tuesday...) Issue number Series number C: PVG code number, week and year of manufacture D: PVP pressure setting C D 3 mm Q max. B Q max. A Nm [70 lbf in] 10 mm E E 5

6 Installation Option, oil flow direction and setting of max flow P-A PVM to the left of PVP 7-9 Nm [1-79 lbf in] P-B B A PVS Q max: P A Q max: P B PVM PVB PVEO PVEA PVP PVMD PVMR/ PVMF PVEH/ PVES PVH E E

7 Installation Connections, pump side module, PVP T end plate, PVS B A PAccu Pp gauge (PVP-OC) T0 P LX Pp gauge LS PVP-OC shown E E Tightening torque Maximum tightening torque Connection BSPP port connection With steel washer With copper washer With aluminum washer With cutting edge UNF port connection With O-ring LS, LX, T0 P A/B Gauge: P, Pp, T Pp Accum. G 3/4 G 1 G 3/4 G 1/4 G 1 G 1 1/4 210 Nm 330 Nm 210 Nm 40 Nm 330 Nm 540 Nm 1850 lbf in 2920 lbf in 1850 lbf in 350 lbf in 2920 lbf in 4780 lbf in 50 Nm 70 Nm 50 Nm 20 Nm 70 Nm 100 Nm 445 lbf in 20 lbf in 445 lbf in 180 lbf in 20 lbf in 885 lbf in 110 Nm 150 Nm 110 Nm 30 Nm 150 Nm 240 Nm 970 lbf in 1330 lbf in 970 lbf in 270 lbf in 1330 lbf in 2125 lbf in 210 Nm 330 Nm 210 Nm 40 Nm 330 Nm 540 Nm 1850 lbf in 2920 lbf in 1850 lbf in 350 lbf in 2920 lbf in 4780 lbf in 1 1/1 in /1 in /1 in-12 9/1 in /1 in /8 in Nm 10 Nm 120 Nm 40 Nm 10 Nm 320 Nm 1040 lbf in 1420 lbf in 1040 lbf in 350 lbf in 1420 lbf in 2830 lbf in 7

8 Installation Installation of lever Base with an angle of 22.5 Base with an angle of 37.5 P10 007E Pressure setting, PVP PVP-CC PVP-OC 4 mm 30 ~ 120 bar 30 ~ 1740 psi P10 008E 8

9 Installation PVEH/PVEM/PVES Adjustment of PVE when max. lever travel is exceeded (PVE is factory-preset) Check maximum lever travel in neutral position. 1. Make sure the system is supplied with hydraulic power. 2. Connect supply voltage (UDC) (Signal voltage 0.5 x UDC), or cut off the signal voltage (US) on pin 2. max. 2 [0.08] A B max. 2 [0.08] Lever travel exceeded in PVG 100 Direction of rotation for adjustment of position transducer Direction A Direction B Turn of transducer 1 /4 1 /2 3 /4 Movement of lever 1.5 mm [0.0 in] 3.0 mm [0.12 in] 4.5 mm [0.18 in] 9

10 Installation Installation and technical data for pvpp (solenoid operated pilot drain) 2 (coil nut) 1 (cartridge valve) Position 1 2 Across flats Max. tightening torque 24 mm 45 Nm [0.94 in] [400 lbf in] 20 mm 5 Nm [0.79 in] [44 lbf in] Max. operation pressure 350 bar [507 bar] Max. coil surface temperature 155 C [311 F] Rated voltage 12 V 24 V Current consumtion 22 C (71, F) coil temperature 1.55 A 0.78 A 110 C (230 F) coil temperature 1.00 A 0.50 A Power consumtion 22 C (71, F) coil temperature 19 W 19 W 110 C (230 F) coil temperature 12 W 12 W Max. permissible deviation from rated supply voltage ±10% PVPP connection When installing the wire remember to connect the built-in diode to the plug pins. P10 004E 10

11 Installation Installation and technical data for PVPE (solenoid relief valve) 2 Nm [17.5 lbf in] 2.5 mm Position (coil nut) 2 (cartridge valve) Across flats Max. tightening torque 22 mm 5 Nm [0.87 in] [45 lbf in] 3 mm 85 Nm [1.42 in] [750 lbf in] Max. operation pressure 350 bar [507 bar] Max. coil surface temperature 155 C [311 F] Rated voltage 12 V 24 V Current consumtion 22 C (71, F) coil temperature 1.55 A 0.78 A 110 C (230 F) coil temperature 1.00 A 0.50 A Power consumtion 22 C (71, F) coil temperature 19 W 19 W 110 C (230 F) coil temperature 12 W 12 W Max. permissible deviation from rated supply voltage ±10% PVPE connection When installing the wire remember to connect the built-in diode to the plug pins. P10 288E 11

12 Installation PVMR disassembly P

13 Installation PVMR/F assembly X Y X Z X X Z Tightening torques and widths across flats Width across flats X Y Z 5 mm 3 mm 11 mm PVMF 19 mm PVMR Tightening torque 8 ± 0.5 Nm 15 ± 2 Nm 4 ± 1 Nm [70 ± 4.5 lbf in] [135 ± 20 lbf in] [35 ± 9 lbf in] P

14 Installation Standard main spool assembly for PVMR mm mm 4. 8 Nm [70 lbf in] 8 Nm [70 lbf in] 12 mm Note: Spools must be installed with LS holes on B port side of PVB. E E 14

15 Installation Standard float spool assembly for PVMF P A F 11 mm 8 Nm [70 lbf in] Note: Spools must be installed with LS holes on B port side of PVB. 12 mm 8 Nm [70 lbf in] E E 15

16 PVPF, open center pump side module 4 mm 20 Nm [177 lbf in] mm Nm [310 lbf in] mm 4 Nm [35 lbf in] mm 4 Nm [35 lbf in] mm 3 Nm [25 lbf in] 4 41 mm Nm [750 lbf in] E E 1

17 Type Description Code number G1 thread UNF thread PVPF Open center with pilot 12 bar 11B5110 supply for electrical spring 11B5510 actuation and pilot gage port 20 bar 11B5112 spring 11B5512 PVPF Open center with pilot 12 bar 11B5140 supply for electrical spring 11B5540 actuation, pilot gage port, and facility for 20 bar 11B5142 pilot shut o spring 11B5542 Item Description Code No. 1 Spool, 12 bar Spool, 20 bar Orifice, 0.7 dia, M Washer, 19.3 x 34.0 x 3.0 [0.7 x 1.34 x 0.12] Spring, 12 bar Spring, 20 bar Spring, 12 bar Spring, 20 bar O-ring, 33.3 x 2.4 [1.31 x 0.09] Plug Orifice, 0.7 dia, M8 x Plug, G 1/4 thread 31X Plug, 9/1-18 UNF thread O-ring, 11.9 x 1.98 [0.47 x 0.08] Washer, 13.5 x 17.5 x 1.5 [0.53 x 0.9 x 0.0] LS relief valve 155L Plastic cap 155L Plastic plug w/o-ring (1 5/1-12 UNF thread) 15H Plastic plug w/gasket (G1 thread) 33X Plug assembly, w/o-ring (9/1-18 UNF thread) A Plastic plug w/gasket (9/1-18 UNF thread) 15H Plastic plug w/gasket (G 1/4 thread) 33X Cap plug assembly w/o-ring Spring, PR Spool, PR Filter retainer (non-serviceable) Filter, PR (non-serviceable) Screw, pilot check valve (M10 x 1) Spring, pilot check valve Ball, pilot check valve (M steel) Orifice, 0.4 dia (M10 x 1) Plug assembly, w/seal (M12 x 1.5) Seal kit (includes item and 12) LS relief valve service tool 155L494 E E 17

18 PVPE, PVPD and pilot shut-off (PVPP) 1 3 mm 85 Nm [750 lbf in] 85 Nm [750 lbf in] 17 mm mm 2 Nm [17.5 lbf in] mm 5 Nm [44.2 lbf in] Nm [ lbf in] E E 18

19 PVPE, PVPD and pilot shut-off (PVPP) Type PVPE Code No. PVPD Accessory plug (PVPF only) PVPP Extra electrical relief ( PVPF only) 12 volt 155G volt 155G G5041 Electrical pilot shut-o valve 12 volt 11B5052 (PVPV or PVPF) 24 volt 11B5054 Item Description Code No. 1 Electrical plug 155G Electrical relief valve, 12 volt (item 3, 4, and 5 included) 155G Electrical relief valve, 24 volt (item 3, 4, and 5 included) 155G O-ring, x 2.2 [1.18 x 0.10] Back-up ring 27.0 x 2.0 [1.0 x 0.08] O-ring, 2.7 x 1.78 [1.05 x 0.07] 1 1 Spring Orifice, M5 x 0.5 dia. [ 0.2 x 0.02] Spool Plug (item 10 included) 1 10 O-ring, 30.3 x 2.4 [1.19 x 0.09] 1 11 Insert (item 9 and 10 included) 155G Coil nut (item 13 included) O-ring, -05 viton, 75D, 12 x 2 [0.47 x 0.08] Coil, 12 volt, 22w DIN Coil, 24 volt, 22w, DIN Solenoid valve (item 12, 1, 17, 18, 19, and 20 included) O-ring, 1.4 x 2.2 [0.5 x 0.09](3-908)D Back-up ring, 8-014, x 13.8 x 0.7 [0.43 x 0.54 x 0.03] O-ring, O-ring, Back-up ring, PVPE seal kit (includes item 3, 4, and 5) 155G PVPP seal kit (includes item 10, 13, 1, 17, 18, 19, and 20) E101 30E 19

20 PVPV, closed center pump side module 14 mm mm Service tool torque Nm [177 lbf in] ± 3 Nm [310 ± 5 lbf in] 35 ± 3 Nm [310 ± 5 lbf in] mm ± 3 Nm [310 ± 5 lbf in] Nm [750 lbf in] 13 mm E E 20

21 PVPV, closed center pump side module Type Description Code number G1 thread UNF thread Closed center with pilot supply for electrical actuation and pilot gage port 11B B5511 Closed center with pilot supply for hydraulic actuation and pilot gage port PVPV Closed center with pilot supply for electrical actuation, pilot gage port, and facility for pilot shut o Closed center with pilot supply for hydraulic actuation, pilot gage port, and facility for pilot shut o 11B B Item Description Code No. 10 Orifice, 0.7 dia, M8 x Plug, G 1/4 thread 31X Plug, 9/1-18 UNF thread Washer, 13.5 x 17.5 x 1.5 [0.53 x 0.9 x 0.0] O-ring, 11.9 x 1.98 [0.47 x 0.08] LS relief valve Plastic cap 155L Plastic plug w/o-ring (1 5/1-12 UNF thread) 15H Plastic plug w/gasket (G1 thread) 33X Plug assembly, w/o-ring (9/1-18 UNF thread) A Plastic plug w/gasket (9/1-18 UNF thread) 15H Plastic plug w/gasket (G 1/4 thread) Cap plug assembly w/o-ring 15H Spring, PVE Spring, PVH Spool, PR Filter retainer (non-serviceable) Filter, PR (non-serviceable) Screw, pilot check valve (M10 x 1) Spring, pilot check valve Ball, pilot check valve (M steel) Seal kit (includes item 12 and 18) LS relief valve service tool 155L494 P10 299E 21

22 PVPV - closed center pump side module 140 Nm [103 lbf ft].25 in 10 mm 1 Service tool 20 Nm [177 lbf in] in 13 Nm [115 lbf in] mm 4 Nm [35 lbf in] 0 Nm [44 lbf ft] mm mm mm 25 Nm [221 lbf in] Nm [28-31 lbf ft] 0 Nm [44 lbf ft] E E 22

23 PVPV - closed center pump side module with integrated priority function E E Type Description Code number P=G 3 /4 thread P=1 1 /1 thread T=G 1 thread T=1 5 /1 thread PVPV Closed center pump side module 11B B511 Item Description Code No. 1 Spool, priority valve Spring, priority valve O-ring, x 2.20 [0.7 x 0.09] Plug, priority valve, M22 x 1.5 (LSt: int. thread 9/1-18 UNF) 1 4 Plug, priority valve, M22 x 1.5 (LSt: internal thread G 1/4) 1 5 Plastic plug w/gasket (9/1-18 UNF thread) 15H Plastic plug w/gasket (G 1/4 UNF thread) 33X Spool, pressure reducer Spring, pressure reducer Cap plug assembly w/o-ring Shuttle disk assembly Plug, G 1/4 thread 3 11 Plug, 9/1-18 UNF thread 3 12 Washer, 13.5 x 17.5 x 1.5 [0.53 x 0.9 x 0.0] 3 12 O-ring, 11.9 x 1.98 [0.47 x 0.08] 3 13 LS relief valve 155L Plastic cap 155L O-ring, x 2.95 [1.17 x 0.12] (3-91) Plug, 1 5/1-12 UNF thread Plug, M22 x 1.5 thread Plastic plug w/gasket (1 5/1-12 UNF thread) 15H Plastic plug w/gasket (G1 thread) 33X Plastic plug w/gasket (3/4-1 UNF thread) 15H Plastic plug w/gasket (G 1/2 thread) 33X Plastic plug w/gasket (1 1/1-12 UNF thread) 15H Plastic plug w/gasket (G 3/4 thread) 33X Plug assembly, w/o-ring (9/1-18 UNF thread) A 3 22 Plug assembly, w/o washer (G 1/4 thread) 31X Orifice, 0.40 dia, M10 x Mounting bracket Washer Screw, M Seal kit (includes item 3, 9, 12, and 15) LS relief valve service tool 155L

24 PVB, basic module, PVLA, anti-cavitation valve PVLP, shock and anticavitation valve PVBZ, poppet valves 27 mm 0 Nm [44 lbf ft] same as opposite side of housing PVLP 8 PVLA 13 mm 40 Nm [354 lbf in] E E 24

25 PVB, basic module PVB, PVBZ, PVLA, and PVLP Type Description Code number G 3 /4 thread 1 1 /1-14 thread PVB Post compensated Without PVLP With PVLP 11B250 11B20 PVBZ Post compensated w/pilot operated check valves on work port A and B Without PVLP With PVLP 11B252 11B22 PVB Post compensated Without PVLP With PVLP 11B50 11B0 PVBZ Post compensated w/pilot operated check valves on work port A and B Without PVLP With PVLP 11B52 11B2 Item Description Code No. 1 Compensator valve assembly Housing Plastic plug, G 3 /4 33X Plastic plug, 1 1 / H Pilot operated check valve assembly Shuttle disk assembly Logic check valve assembly PVLP see below PVLA 157B PVLA plug 157B O-ring, 15. x 1.78 [0.1 x 0.07] O-ring O-ring Pilot cartridge seal kit * Seal kit (includes item 10, 12, and 13) Description Code No. 32 = 157B = 157B = 157B2250 PVLP 157B2 _ 50 = 157B = 157B = 157B225 Pressure setting (bar) 3 = 157B = 157B = 157B = 157B = 157B = 157B = 157B = 157B = 157B = 157B = 157B = 157B2350 E E 25

26 PVT & PVTI - end plate PVT100 - tank module PVTL 100/32 - interface module mm 40 Nm [354 lbf in] E E 2

27 PVT & PVTI - end plate PVT100 - tank module PVTL 100/32 - interface module Type Description Code number G 1 1 /4 thread 1 5 /8-12 thread PVT PVT PVTI End plate with tank port and PVLP shock valve facility End plate with tank port and LX port and PVLP shock valve facility 100/32 interface module with tank port and PVLP shock valve facility 11B B B B B2220 Item Description Code No. 1 PVTI 100/32 interface housing with tank port PVT 100 end plate housing with tank port PVLP see below PVLA 157B Shipping plug, 9 / H Shipping plug, G 1 /4 33X Shipping plug, 1 5 / Shipping plug, G 1 1 /4 15H Plug w/o-ring 157B Description Code No. 32 = 157B = 157B = 157B2250 PVLP 157B2 _ 50 = 157B = 157B = 157B225 Pressure setting (bar) 3 = 157B = 157B = 157B = 157B = 157B = 157B = 157B = 157B = 157B = 157B = 157B = 157B2350 E E 27

28 PVAS assembly kit for PVP with PVT 17 mm Nm [28-31 lbf ft ] 3 PVT 5 PVB * 5 * E101 31E 28

29 PVAS assembly kit for PVP with PVT Type Description Code No. PVAS for 1 PVB basic module 11B8001 PVAS for 2 PVB basic modules 11B8002 PVAS for 3 PVB basic modules 11B8003 PVAS for 4 PVB basic modules 11B8004 PVAS for 5 PVB basic modules 11B8005 PVAS for PVB basic modules 11B800 PVAS for 7 PVB basic modules 11B8007 PVAS for 8 PVB basic modules 11B8008 Item Description Code No. 1 Nut, M10 x Washer Stay bolt, M10 x 111 mm [4.37 in] 3 Stay bolt, M10 x 159 mm [.2 in] 3 Stay bolt, M10 x 207 mm [8.15 in] 3 Stay bolt, M10 x 255 mm [10.04 in] 3 Stay bolt, M10 x 303 mm [11.93 in] 3 Stay bolt, M10 x 351 mm [13.82 in] 3 Stay bolt, M10 x 399 mm [15.71 in] 3 Stay bolt, M10 x 447 mm [17.0 in] 3 5 O-ring, 1.0 x 2.5 x [0.3 x 0.1] O-ring, 5.0 x 2.0 [0.19 x 0.08] O-ring, 24.0 x 3.0 [0.94 x 0.12] O-ring, 20.0 x 3.0 [0.79 x 0.12] O-ring, 14.0 x 2.0 [0.55 x 0.08] Seal kit (includes item 5,, 7, 8, and 9) E E 29

30 PVAS assembly kit for PVP with PVTI 10 mm Nm [28-31 lbf ft ] PVTI 5 PVB * 5 * E E 30

31 PVAS assembly kit for PVP with PVTI Type Description Code No. PVAS for 1 PVB basic module 11B8021 PVAS for 2 PVB basic modules 11B8022 PVAS for 3 PVB basic modules 11B8023 PVAS for 4 PVB basic modules 11B8024 PVAS for 5 PVB basic modules 11B8025 PVAS for PVB basic modules 11B802 PVAS for 7 PVB basic modules 11B8027 PVAS for 8 PVB basic modules 11B8028 Item Description Code No. 1 Nut, M10 x Washer Stay bolt, M10 x 111 mm [4.37 in] 3 Stay bolt, M10 x 159 mm [.2 in] 3 Stay bolt, M10 x 207 mm [8.15 in] 3 Stay bolt, M10 x 255 mm [10.04 in] 3 Stay bolt, M10 x 303 mm [11.93 in] 3 Stay bolt, M10 x 351 mm [13.82 in] 3 Stay bolt, M10 x 399 mm [15.71 in] 3 Stay bolt, M10 x 447 mm [17.0 in] 3 5 O-ring, 1.0 x 2.5 x [0.3 x 0.1] O-ring, 5.0 x 2.0 [0.19 x 0.08] O-ring, 24.0 x 3.0 [0.94 x 0.12] O-ring, 20.0 x 3.0 [0.79 x 0.12] O-ring, 14.0 x 2.0 [0.55 x 0.08] Seal kit (includes item 5,, 7, 8, and 9) E E 31

32 PVBS main spool Friction detent mm mm 8 Nm [70 lbf in] 12 mm 8 Nm [70 lbf in] Mechanical float Nm [70 lbf in] Main spool 8 Nm [70 lbf in] 12.5 mm De Float B-port 8 Nm [70 lbf in] Note: Spools must be installed with LS holes on B port side of PVB. 8 Nm [70 lbf in] E E 32

33 PVBS main spool Type Description Code No. PVBS Standard PVBS Electric float position, B port PVBS Mechanical float position, B port PVBS Friction detent Item Description Code No. 1 Main spool Plug O-ring,.0 x 1.5 [0.24 x 0.0] Spring stop, black Spring Spring, hydraulic actuation 155L Tension rod Spring stop (float position), gold Bushing (float position) Float position, B port (item 3 included) 155L Friction detent (item 3 included) 155L Spring stop (float position), silver 1 1 E E 33

34 PVM, mechanical activation Nm [70 lbf in] 8 5 mm Nm [ lbf in] mm 8 Nm [70 lbf in] 7 10 mm 4 mm 8 Nm [70 lbf in] 13 mm 11 mm E E 34

35 PVM, mechanical activation Type Description Angle Code No. PVM Adjustable B3171 PVM Adjustable B3172 PVM Adjustable, without lever and base - 157B3173 PVM Adjustable, without lever B3174 PVM Adjustable, without lever B3175 PVM Non-adjustable B3191 PVM Non-adjustable B3192 PVM Non-adjustable, without lever and base - 157B3193 PVM Non-adjustable, without lever B3194 PVM Non-adjustable, without lever B3195 Item Description Code No. 1 Seal nut 81X Threaded pin 81X Screw, M x 15 SHCS O-ring, 5.0 x 2.0 [0.2 x 0.08] Profile O-ring Housing Lever with nut Base kit, L Base kit, Screw, M5 x 25 SS SHCS Washer Base/lever kit, L Base/lever kit, Seal kit (includes item 4 and 5) 157B E E 35

36 PVH, PVMD, PVMF, and PVMR covers 19 mm PVMR 11 mm PVMF Nm [35 lbf in] Nm [70 lbf in] 5 mm PVH Nm [133 lbf in] 3mm PVMD PVMR/ PVMF E E 3

37 PVH, PVM, PVMD, PVMF, and PVMR covers Type Description Code No. PVMD Mechanical activated cover 157B0001 PVH Hydraulic activated cover, G 1 /4 - thread 157B0008 Hydraulic activated cover, 9 /1-18 UNF thread 157B0007 PVMR Mechanical detent 157B0015 PVMF Mechanical float 157B0005 Item Description Code No. 21 Profile O-ring O-ring, 5.0 x 2.0 [0.2 x 0.08] Cover 1 24 Screw, M x Cover (PVMF/PVMR) 1 2 O-ring, 19.3 x 2.4 [0.7 x 0.09] (PVMF/PVMR) Plug (PVMF) 1 27 Plug (PVMR) 1 28 Ball, 5 mm [0.5] (PVMF/PVMR) Spring (PVMR) 3 29 Spring (PVMF) 3 30 O-ring,.0 x 1.5 [0.24 x 0.59] (PVMF) 3 30 O-ring, 14.0 x 2.0 [0.55 x 0.08] (PVMR) 3 31 Plug (PVMF) 3 31 Plug (PVMR) 3 32 O-ring, 21.3 x 2.4 [0.84 x 0.09] Cover, G 1 /4 - thread 1 33 Cover, 9 /1-18 UNF thread 1 35 Sealing plug, G 1 /4 - thread 2 35 Sealing plug, 9 /1-18 UNF thread 2 Seal kit (includes item 21, 22, 2, 30, and 32) 157B E E 37

38 Electrical activation, Hirschmann conn. PVEH/PVES mm 8 Nm [70 lbf in ] PVEO/ PVEO-R mm 8 Nm [70 lbf in ] E101 32E 38

39 Electrical activation, Hirschmann conn. PVEO PVEO-R On/O actuation On/O, 12 volt, Hirschmann connector On/O, 24 volt, Hirschmann connector On/O with ramp, 12 volt, Hirschmann connector On/O with ramp, 24 volt, Hirschmann connector Code No. 157B B B B4229 Proportional actuation Code No. PVEH PVES Standard, active fault monitoring, volt, Hirschmann conn. 157B4032 Standard, passive fault monitoring, volt, Hirschmann conn. 157B4033 Float, active fault monitoring, volt, Hirschmann conn. 157B4332 0% hysteresis active fault monitoring, volt, Hirschmann conn. 157B4832 0% hysteresis passive fault monitoring, volt, Hirschmann conn. 157B4832 Item Description Code No. 3 Electric plug, DIN 4350, gray, PG L Electric plug, Din 4350, black, PG 9 984L Screw, M x Plug * O-ring, 30.0 x 2.5 [1.18 x 0.10] * O-ring, 8.0 x 2.0 [.35 x 0.08] * O-ring x 2.0 [0.39 x 0.08] * Filter * O-ring, 4.0 x 1.0 [0.1 x 0.04] Check valve Orifice, 1.0 mm [0.04] Orifice, 0.8 mm [0.03] Seal kit (includes item 7, 8, 9, 10, and 11) 157B E E 39

40 Electrical activation, AMP connector 2 5 PVEA/PVEH/PVES 5 mm 8 Nm [70 lbf in ] mm 8 Nm [70 lbf in ] Nm [70 lbf in ] 5 mm 5 PVEA-DI/ PVEH-DI PVED PVEO/ PVO-R E E 40

41 Electrical activation, AMP connector PVEO PVEO-R On/O actuation On/O, 12 volt, AMP connector On/O, 24 volt, AMP connector On/O with ramp, 12 volt, AMP connector On/O with ramp, 24 volt, AMP connector Code No. 157B B B B4904 Proportional actuation Code No. Standard, active fault monitoring, volt, AMP conn. 157B4734 PVEA Standard, passive fault monitoring, volt, AMP conn. 157B4735 PVEA-DI Standard, active fault monitoring, volt, AMP conn. 157B473 Standard, passive fault monitoring, volt, AMP conn. 157B4737 Standard, active fault monitoring, volt, AMP conn. 157B4034 PVEH Standard, passive fault monitoring, volt, AMP conn. 157B4035 Standard, active fault monitoring, volt, AMP conn. 157B403 PVEH-DI Standard, passive fault monitoring, volt, AMP conn. 157B4037 PVES 0% hysteresis active fault monitoring, volt, AMP conn. 157B4834 0% hysteresis passive fault monitoring, volt, AMP conn. 157B4835 PVED 0% hyst., passive or acrive fault monitoring, volt, AMP 157B4943 Item Description Code No. 2 AMP female connector, gray 157B AMP female connector, black 157B Screw, M x Plug O-ring, 30.0 x 2.5 [1.18 x 0.10] O-ring, 8.0 x 2.0 [.35 x 0.08] O-ring x 2.0 [0.39 x 0.08] Filter O-ring, 4.0 x 1.0 [0.1 x 0.04] Check valve Orifice, 1.0 mm [0.04] Orifice, 0.8 mm [0.03] Seal kit (includes item 7, 8, 9, 10, and 11) 157B E E 41

42 Seal kits Seal kits for PVG 100 Module Code No. Page No. PVM / PVH / PVMD / PVMR / PVMF 157B , 37 PVEO/PVEA/PVEH/PVES/PVEH-DI/PVED 157B , 41 PVPV/PVPF/PVB/PVT/PVTI (for each sealing face) , 31 PVPP PVPE 155G P10 300E 42

43 Notes 43

44 Products we offer: y Bent Axis Motors y Closed Circuit Axial Piston Pumps and Motors y Displays y Electrohydraulic Power Steering y Electrohydraulics y Hydraulic Power Steering y Integrated Systems y Joysticks and Control Handles y Microcontrollers and Software y Open Circuit Axial Piston Pumps y Orbital Motors y PLUS+1 GUIDE y Proportional Valves y Sensors y Steering y Transit Mixer Drives Danfoss Power Solutions is a global manufacturer and supplier of high-quality hydraulic and electronic components. We specialize in providing state-of-the-art technology and solutions that excel in the harsh operating conditions of the mobile off-highway market. Building on our extensive applications expertise, we work closely with our customers to ensure exceptional performance for a broad range of off-highway vehicles. We help OEMs around the world speed up system development, reduce costs and bring vehicles to market faster. Danfoss Your Strongest Partner in Mobile Hydraulics. Go to for further product information. Wherever off-highway vehicles are at work, so is Danfoss. We offer expert worldwide support for our customers, ensuring the best possible solutions for outstanding performance. And with an extensive network of Global Service Partners, we also provide comprehensive global service for all of our components. Please contact the Danfoss Power Solution representative nearest you. Comatrol Schwarzmüller-Inverter Turolla Valmova Hydro-Gear Daikin-Sauer-Danfoss Local address: Danfoss Power Solutions US Company 2800 East 13th Street Ames, IA 50010, USA Phone: Danfoss Power Solutions GmbH & Co. OHG Krokamp 35 D Neumünster, Germany Phone: Danfoss Power Solutions ApS Nordborgvej 81 DK-430 Nordborg, Denmark Phone: Danfoss Power Solutions Building #22, No Jin Hai Rd Jin Qiao, Pudong New District Shanghai, China Phone: Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed. All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.