gpphighpressure.com (417) BALL VALVES *Dimensions are subject to change and are considered reference.
|
|
|
- Angelica Hodge
- 5 years ago
- Views:
Transcription
1 LL VLVS 51 *imensions are subject to change and are considered reference.
2 2 1 TURS & NITS O PP LL VLVS Trunnion style ball valves w/positive shut-off in 10,000-15,000-psi ( bar) esigned for fully open and fully closed positions low options in On/Off (2-Way bidirectional) and Switch/ivert (-Way w/bottom inlet) oned & threaded, medium pressure, high pressure and NPT end connections Mounts Ways: Valve top bolt mount Panel mount with nuts* (see diagram) Valve body mounting holes 1 2 Operator friendly & fail safe captured stem design for safety Trunnion style ball design provides reliable operation and consistent sealing under a range of pressures and during system depressurization/repressurization Low torque with easy ergonomic quarter turn handle Panel Mount Hole Pattern Pressure/Temperature ratings from -17 (-27 ) up to 250 (121 ) (SM 1. process piping & hapter IX HP piping calculations) 16 Stainless Steel with luorocarbon M o-rings vailable in Orifice sizes: (4.8mm) (6.4mm) 0.75 (9.5mm) vailable in.25 (6.5mm) to 1 (25.4mm) end connections ll valves are water tested for minimum of 60 seconds at maximum working pressure Shell and seat testing insures no visible leakage! Valves not cycled for a long period of time may have a higher initial actuation torque. 52
3 LL VLV PRT NUMRIN MTRIX gpphighpressure.com ONNTION VRITIONS ssembly Ports Pressure (psi) Size (inch) O-Ring onn. ender Size Material V 2 ON / O 10k 10,000 UN P * NN WY IVRTIN 15k 15, /4 V VITON M M NN S WY SWITHIN 20k 6 /8 PM H W 4 4 WY 8 1/2 U URTHN 8 blank 16 W 5 5 WY H HSTLLOY 24 I INONL *ender not used for female type PIP ML / PIP ML P ML 2 PM ML ML / ML M ML 4 MM ML ML / ML H ML 4 HM ML 6 9 XMPL Part Number V2-10-P4P6: ssembly Valve 2 WY 10 LL VLV WITH UN ORINS N 1/4 N /8 ML PIP PTORS 5 *imensions are subject to change and are considered reference.
4 2-WY LL VLVS SIZ (IN.) PRT PRSSUR IMNSIONS - INHS (mm) NUMR psi (bar) OPNIN 2-WY LL VLV - NPT ML V2-15V-P4 V2-15V-P6 15,000 (104.48) 15, (98.04) (49.02) 1.99 (104.5) (101.09) (50.55) 1/2 IN V2-15V-P8 15, (104.5) (111.25) (55.6) (65.5) (.27) (20.57) (26.92) (58.9) (19.05) (78.74) (8.10) /4 IN V2-10V-P12 10, (689.7) (116.) (58.17) 1 IN V2-10V-P16 10, (689.7) (108.71) (54.6) 2-WY LL VLV - MIUM PRSSUR V2-20V-M (97.79) (48.90) V2-20V-M (106.4) (5.21) 9/16 IN V2-20V-M (122.4) (61.21) (65.5) (.27) (20.57) (26.92) (58.9) (19.05) (78.74) (8.10) /4 IN V2-20V-M (146.81) (7.41) 1 IN V2-20V-M (154.4) (77.22) 2-WY LL VLV - HIH PRSSUR V2-20V-H4 V2-20V-H /16 IN V2-20V-H9 (109.7) 4.82 (122.4) (54.86) (72.9) (.27) (20.57) (26.92) (58.9) (19.05) (78.74) (8.10) 2.41 (61.21) LO TH. THROUH HOL ORII SIZ: ORII SINTOR: (4.76mm) 1/4 (6.5mm) /8 (9.5mm) 4 6 *imensions are subject to change and are considered reference. 54
5 2-WY LL VLVS gpphighpressure.com SIZ PRT PRSSUR IMNSIONS - INHS (mm) LO (IN.) NUMR psi (bar) OPNIN TH. 2-WY LL VLV - 1/4 NPT ML V2-154V-P4 15,000 1/ (104.5) (6.40) (100.58) (50.29) V2-154V-P6 15,000 1/ (104.5) (6.40) (100.58) (50.29) 1/2 IN V2-154V-P8 15,000 1/ (104.5) (6.40) (100.58) (50.29) (65.5) (.27) (20.57) (26.92) (58.9) (19.05) (78.74) (8.10) /4 IN V2-104V-P12 10,000 1/ (689.7) (6.40) (122.4) (61.21) 1 IN V2-104V-P16 10,000 1/ (689.7) (6.40) (108.71) (54.6) 2-WY LL VLV - 1/4 MIUM PRSSUR V2-204V-M4 1/4 (6.40).8 (85.85) 1.69 (42.9) V2-204V-M6 1/ (6.40) (116.) (58.17) 9/16 IN V2-204V-M9 1/ (6.40) (117.86) (58.9) (65.5) (.27) (20.57) (26.92) (58.9) (19.05) (78.74) (8.10) /4 IN V2-204V-M12 1/ (6.40) (122.4) (61.21) 1 IN V2-204V-M16 1/ (6.40) (108.71) (54.6) 2-WY LL VLV - 1/4 HIH PRSSUR V2-204V-H4 V2-204V-H (109.7) (54.86) (72.9) (.27) (20.57) (26.92) (58.9) (19.05) (78.74) (8.10) 9/16 IN V2-204V-H (122.4) (61.21) THROUH HOL ORII SIZ: ORII SINTOR: (4.76mm) 1/4 (6.5mm) /8 (9.5mm) *imensions are subject to change and are considered reference.
6 2-WY LL VLVS SIZ PRT PRSSUR IMNSIONS - INHS (mm) LO (IN.) NUMR psi (bar) OPNIN TH. 2-WY LL VLV - /8 NPT ML V2-156V-P4 15,000 / (104.48) (9.50) (18.4) (69.22) V2-156V-P6 15,000 / (104.5) (9.50) (18.4) (69.22) 9/16 IN V2-156V-P8 15,000 / (104.5) (9.50) (18.4) (69.22) (90.9) (5.05) (25.15) (28.58) (58.9) (25.40) (114.0) (44.45) /4 IN V2-106V-P12 10,000 / (689.7) (9.50) (142.75) (71.7) 1 IN V2-106V-P16 10,000 / (689.7) (9.50) (160.5) (80.26) 2-WY LL VLV - /8 MIUM PRSSUR V2-206V-M4 / (9.50) (15.1) (67.56) V2-206V-M6 / (9.50) (156.21) (78.11) 9/16 IN V2-206V-M9 / (9.50) (18.1) (91.57) (90.9) (5.05) (25.15) (28.58) (58.9) (25.40) (114.0) (44.45) /4 IN V2-206V-M12 / (9.50) (192.02) (96.01) 1 IN V2-206V-M16 / (9.50) (222.25) (111.1) 2-WY LL VLV - /8 HIH PRSSUR VS-206V-H4 VS-206V-H (109.7) (54.86) (90.9) (5.05) (25.15) (28.58) (58.9) (25.40) (114.0) (44.45) 9/16 IN VS-206V-H (122.4) (61.21) THROUH HOL ORII SIZ: ORII SINTOR: (4.76mm) 1/4 (6.5mm) /8 (9.5mm) 4 6 *imensions are subject to change and are considered reference. 56
7 -WY LL VLVS gpphighpressure.com SIZ (IN.) PRT PRSSUR IMNSIONS - INHS (mm) NUMR psi (bar) OPNIN -WY LL VLV - NPT ML VS-15V-P4 VS-15V-P6 15,000 (104.48) 15, (98.04) (49.02) (48.51) 2.06 (104.5) (101.09) (50.55) (52.2) 1/2 IN VS-15V-P8 15, (104.5) (111.25) (55.6) (65.5) (59.94) (20.57) (26.92) (58.9) (19.05) (78.74) (8.10) /4 IN VS-10V-P12 10, (689.7) (116.) (58.17) (84.) 1 IN VS-10V-P16 10, (689.7) (108.71) (54.6) (104.65) -WY LL VLV - MIUM PRSSUR VS-20V-M (97.79) (48.90) (48.01) VS-20V-M (106.4) (5.21) (55.7) 9/16 IN VS-20V-M (122.4) (61.21) (65.5) (60.20) (20.57) (26.92) (58.9) (19.05) (78.74) (8.10) /4 IN VS-20V-M (146.81) (7.41) (84.07) 1 IN VS-20V-M (154.4) (77.22) (84.07) -WY LL VLV - HIH PRSSUR VS-20V-H4 VS-20V-H (47.75) (109.7) (54.86) (72.9) (55.7) (20.57) (26.92) (58.9) (19.05) (78.74) (8.10) 9/16 IN VS-20V-H (122.4) 2.41 (61.21) 2.7 (60.20) LO TH. THROUH HOL SRIPTION ON/O SWITHIN LOW IRTION ON O ON HNL ROTTION 180 SINTION S IVRT 90 PRT NUMR XMPL WITH SWITHIN SINTION (S or ): VS-20-VM4 57 *imensions are subject to change and are considered reference.
8 -WY LL VLVS SIZ PRT PRSSUR IMNSIONS - INHS (mm) LO (IN.) NUMR psi (bar) OPNIN TH. -WY LL VLV - 1/4 NPT ML VS-154V-P4 15,000 1/ (104.5) (6.40) (100.58) (50.29) (48.51) VS-154V-P6 15,000 1/ (104.5) (6.40) (100.58) (50.29) (52.2) 1/2 IN VS-154V-P8 15,000 1/ (104.5) (6.40) (100.58) (50.29) (65.5) (65.02) (20.57) (26.92) (58.9) (19.05) (78.74) (8.10) /4 IN VS-104V-P12 10,000 1/ (689.7) (6.40) (122.4) (61.21) (100.58) 1 IN VS-104V-P16 10,000 1/ (689.7) (6.40) (108.71) (54.6) (100.58) -WY LL VLV - 1/4 MIUM PRSSUR VS-204V-M4 VS-204V-M6 1/4 (6.40) 1/4.8 (85.85) (42.9) (48.01) 2.19 (6.40) (116.) (58.17) (55.6) 9/16 IN VS-204V-M9 1/ (6.40) (117.86) (58.9) (65.5) (60.20) (20.57) (26.92) (58.9) (19.05) (78.74) (8.10) /4 IN VS-204V-M12 1/ (6.40) (122.4) (61.21) (57.66) 1 IN VS-204V-M16 1/ (6.40) (108.71) (54.6) (64.01) -WY LL VLV - 1/4 HIH PRSSUR VS-204V-H (64.01) VS-204V-H (109.7) (54.86) (72.9) (48.01) (20.57) (26.92) (58.9) (19.05) (78.74) (8.10) 9/16 IN VS-204V-H (122.4) (61.21) (71.6) THROUH HOL SRIPTION ON/O SWITHIN LOW IRTION ON O ON HNL ROTTION 180 SINTION S IVRT 90 PRT NUMR XMPL WITH SWITHIN SINTION (S or ): VS-20-VM4 *imensions are subject to change and are considered reference. 58
9 -WY LL VLVS gpphighpressure.com SIZ PRT PRSSUR IMNSIONS - INHS (mm) LO (IN.) NUMR psi (bar) OPNIN (122.4) (61.21) (71.6) TH. -WY LL VLV - /8 NPT ML VS-156V-P4 15,000 / (104.5) (9.50) (18.4) (69.22) (60.96) VS-156V-P6 15,000 / (104.5) (9.50) (18.4) (69.22) (60.96) 9/16 IN VS-156V-P8 15,000 / (104.5) (9.50) (18.4) (69.22) (90.9) (60.96) (25.15) (28.58) (58.9) (25.40) (114.0) (44.45) /4 IN VS-106V-P12 10,000 / (689.7) (9.50) (142.75) (71.7) (64.26) 1 IN VS-106V-P16 10,000 / (689.7) (9.50) (160.5) (80.26) (7.15) -WY LL VLV - /8 MIUM PRSSUR VS-206V-M4 / (9.50) (15.1) (67.56) (54.6) VS-206V-M6 / (9.50) (156.21) (78.11) (7.41) 9/16 IN VS-206V-M9 / (9.50) (18.1) (91.57) (90.9) (78.49) (25.15) (28.58) (58.9) (25.40) (114.0) (44.45) /4 IN VS-206V-M12 / (9.50) (192.02) (96.01) (89.66) 1 IN VS-206V-M16 / (9.50) (222.25) (111.1) (89.66) -WY LL VLV - 1/4 HIH PRSSUR VS-206V-H4 4.1 (104.14) VS-206V-H (109.7) (54.86) (90.9) (109.22) (25.15) (28.58) (58.9) (25.40) (114.0) (44.45) 9/16 IN VS-206V-H (122.4) (61.21) (12.08) THROUH HOL SRIPTION ON/O SWITHIN LOW IRTION ON O ON HNL ROTTION 180 SINTION S IVRT 90 PRT NUMR XMPL WITH SWITHIN SINTION (S or ): VS-20-VM4 59 *imensions are subject to change and are considered reference.
HIGH-PRESSURE RELIEF VALVES H-900HP SERIES
IPRSSUR RLI VLVS 9P SRIS TURS n 9P is available as /P products. n 316St.St. onstruction n Service up to psi n Set Pressure from 5 psig to psig ( 3.5 to 414 bar) n Identifying colored springs for each pressure
High Pressure Equipment Medium Pressure Valves, Fittings and Tubing
igh Pressure quipment Medium Pressure Valves, ittings and Tubing service igh Pressure quipment Company has developed a line of Medium Pressure products to assure safe and easy plumbing through. These needle
High Pressure Equipment Medium Pressure Valves, Fittings and Tubing
igh Pressure quipment Medium Pressure Valves, ittings and Tubing service igh Pressure quipment Company has developed a line of Medium Pressure products to assure safe and easy plumbing through. These needle
Go to Table of Contents. Ball and Plug Valves
Ball and Plug s July 2014 Series s Parker series manually, pneumatically and electrically actuated two-way and three-way ball valves are designed for 1/4 and 1/2 turn media shutoff or switching applications
High Pressure Bleed Valves, Gauge Valves and Block & Bleed Valves
High Pressure leed Valves, Gauge Valves and lock & leed Valves FITOK Group FITOK GmbH (Headquarter) Sprendlinger Landstr., 9 Offenbach am Main, Germany Tel.: +9 9 9 9 Fax: +9 9 9 9 FITOK, Inc. North Promenade
Medium Pressure Valves, Fittings and Tubing Pressures to 21,000 psi
Medium Pressure Valves, ittings and Tubing MXMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed
Specialty Products. Specialty Products Index
Specialty Products MAXIMATOR has been designing and manufacturing specialty products to serve the high pressure market for over thirty years and has a worldwide reputation for quality and reliability.
Medium Pressure Valves, Fittings and Tubing Pressures to 22,500 psi
Medium Pressure Valves, ittings and Tubing Pressures to 22,00 psi MXMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality
HIGH-PRESSURE RELIEF VALVES
HIGH-PRESSURE RELIEF VALVES H-9HP SERIES FEATURES n St.St. 316 Construction n MAWT up to 6 psi n Set Pressure from 5 psig to 6 psig ( 3.5 to 4 bar) n Identifying colored springs for each pressure range
Precision and Instrument Regulators 1/4" port size
Section 8 Precision and Instrument Regulators /" port size Contents -8 Precision Air Pressure Regulator /" ports............ale-8-2 R38 Instrument Regulator Aluminum Model /" ports.........ale-8- -8 R38
Hip Air Operated Valves
Hydraulic & Offshore Supplies Hip Air Operated s YOUR GATEWAY TO GLOBAL SUPPLY HOSE ASSEMBLIES PRESSURE TESTING WALFORM EQUIPMENT PACKAGES FLANGES PIPE & TUBE Air Operated s High Pressure Equipment Company
SPECIFICATIONS. Approximate Weight: 10 oz. Surface Finish: Ra micro inch or less MATERIALS OF CONSTRUCTION
DIFFUSION-RESISTANT, DIAPHRAGM SEAL, EXCESS FLOW SHUT-OFF VALVES (FS SERIES) FS Series Excess Flow Shut-Off Valves are designed to automatically shut-off the delivery of gas in a line if the flow exceeds
shutoff valves 900 Series psig Manual Shutoff Valves
0 6000 psig Manual Shutoff Valves Features Zero leakage Protected o-ring Full flow passages Freedom from wire drawing Panel mount standard Hand wheel or toggle handle How it Works Closed O-ring seal on
PRO-50 Instrument Supply Regulator
Features CRN Approved The PRO-50 Regulator has been granted a Canadian Registration Number. Sour Service Capability Available in NACE configurations that comply with NACE MR0175/MR0103. Environmental limits
High Pressure Equipment Taper Seal Valves, Fittings and Tubing
igh quipment Taper Seal Valves, ittings and Tubing 0,000 and,000 psi service igh quipment Company has developed the Taper Seal line of products to assure safe and easy plumbing through,000 psi. These needle
BERMAD Waterworks. Level Control Valve with Altitude Pilot. 700 Series. Model X. Features and Benefits. Major Additional Features
Level Control Valve with Altitude Pilot High level reservoirs & water towers Energy cost critical systems Systems with poor water quality Inherent refreshing Level sustaining at reservoir outlet The Level
Installation, Operation, and Maintenance Manual
Installation, Operation, and Maintenance Manual Welker Instrument Supply Pressure System Model WIC The information in this manual has been carefully checked for accuracy and is intended to be used as a
Choosing the right miniature instrument and control valve is a snap
Choosing the right miniature instrument and control valve is a snap INVALCO Micro Valve The Micro Valve is a unique miniature valve offering versatility and rugged construction. Since its introduction
Ball Valves Subsea Series
Ball Valves Subsea Series Internal Pressures to 20,000 psi (1379 bar) Water Depths to 12,500 ft (3810 meters) Autoclave Engineers subsea ball valves have been designed to fulfill the ever growing demand
Variable displacement vane pump (with mechanical pressure compensator)
Variable displacement vane (with mechanical pressure compensator) PVS-Type Key Features: Rotation: Right (viewed from shaft end) Mounting flanges: 4-hole flange (UNI ISO 319/2) onnections: GS SP (UNI ISO
Bladder-Type Accumulators
18 ladder-type ccumulators n Overview The typical bladder accumulator makes use of the considerable differences in the relative compressibility between a gas and a fluid. typical design consists of a gas
Flow control valves Series RFU - RFO 2/
CATALOGUE > Release 8.5 > Valves Series RFU - RFO Flow control valves Series RFU - RFO Unidirectional and bidirectional flow control valves Ports: M5, G1/8, G1/4, G3/8 and G1/ Nominal diameter: M5 = 1,5
INSTALLATION, MAINTENANCE & OPERATING INSTRUCTIONS 2-4 REDUCED PORT/ FULL PORT (5700/6700) ANSI CLASS 150/300/600/900/1500/2500 TRUNNION BALL VALVES
PBV-USA,Inc. 12735 Dairy Ashford. Stafford, Texas USA 77477 281-340-5400; 800-256-6193 FAX: 281-340-5499 INDUSTRIAL BALL VALVES IM0 69 April 2001 Rev 9 INSTALLATION, MAINTENANCE & OPERATING INSTRUCTIONS
600 Series. Brass Ball Valves
Series Brass Ball Valves full range of economical brass ball valves intended for your common fluid control applications. vailable in standard and full port threaded, full port solder end, and full port
Butterfly Control Valve. DMK/6 Series
Butterfly Control Valve DMK/6 Series UL Listed for US and Canada UL 842 and ULc C125 & C842 File # MH 18741 Models DMK 707/6 (3/4 NPT) DMK 710/6 (1 NPT) DMK 712/6 (1 1/4 NPT) DMK 715/6 (1 1/2 NPT) DMK
Homestead Series 820 AWWA Butterfly Valves
Homestead Series 820 AWWA Butterfly Valves Dependable Valves for Water & Wastewater Service BODY: The ductile iron body meets or exceeds the design strength requirements of the AWWA C504 standards. Flange
Pressure Independent Control Series
Document No. 155-522 Pressure Independent Control Series Two-Way Cast Iron Flanged Bodies, ANSI 125 and 250 Description Siemens Pressure Independent Control Valves integrate three functions into a single
Direct Operated Precision Regulator Modular Style. Standard Specifications
1 Direct Operated Precision Regulator Modular Style Series P3 Courtesy of Steven Engineering, Inc.-23 Ryan Way, South San Francisco, CA 948-637-Main Office: (65) 588-92-Outside Local Area: (8) 258-92-www.stevenengineering.com
BERMAD Waterworks. Pressure Reducing Valve. 700 Series. Model 720. Features and Benefits. Major Additional Features
Pressure Reducing Valve Flow and leakage reduction Cavitation damage protection Throttling noise reduction Burst protection System maintenance savings The Pressure Reducing Valve is a hydraulically operated,
VG Series VGG and VGD Gas Valves for use with SKP Electro-hydraulic Actuators
VG Series VGG and VGD Gas Valves for use with SKP Electro-hydraulic Actuators Technical Instructions Document No. 155-51P5 VG August 1, 01 VGG VGD0 VGD0 Description Only when assembled to Series SKP actuators
Pump Assembly. 25 Ton Jack. Air Kit. Emerson PN. Hyd Kit. Emerson PN. Air Kit ITEM NO.
2 4 ITM NO. ir Hyd SRIPTION QTY. 2-0P Pump ody 2 2-02P Piston Spring 2-0P Piston ssembly 4 2-04P Piston O-Ring 2-0P ir Piston Rod O-Ring 6 2-06P ir Motor lock 7 2-07P ir Motor lock O-Ring 8 2-08P ir Motor
Premium Series. Economical Price & Reliable Performance. High Quality. Rust-Resistant. Long Life. Tamper-Resistant locking Screw.
Premium Series High Quality Forged Brass Body Rust-Resistant Nickel Plated Finish Long Life Corrosion Resistant Valve Seat Economical Price & Reliable Performance Tamper-Resistant locking Screw Reduces
VG Series VGG and VGD Gas Valves for use with SKP Electro-hydraulic Actuators
VG Series VGG and VGD Gas Valves for use with SKP Electro-hydraulic Actuators Technical Instructions Document No. 155-51P5 VG August 11, 005 GAS009R1 VGG VGD0 VGD0 Description Only when assembled to SKP
IN-LINE CHECK VALVES CIT-02 / 03 / 06 / 10 (1/4,3/8,3/4,1-1/4) RIGHT ANGLE CHECK VALVES CRT / CRG-03 / 06 / 10 (3/8,3/4,1-1/4)
IN-LIN HK VLVS IT- / 3 / / (/,3/8,3/,-/) RIGHT NGL HK VLVS RT / RG-3 / / (3/8,3/,-/) Up to 5 MPa (33 PSI), 3 L/min (33 U.S.GPM) Pub. - IRTIONL ONTROLS These valves allow free flow in one direction and
WaterSource Heat Pump Hose Kit Performance Specification-Summary
WaterSource Heat Pump Hose Kit Performance Specification-Summary AUTOMATIC & MANUAL BALANCING HOSE KITS Contractor shall provide and install Hays Hose Kits. Each kit, shall include a Hays 2500 Series Mesurflo
Relief Valves. Relief Valves. International, Inc. Company ACIRCOR. RS Differential NB 9.5mm. RVA In-line Differential NB 6 to 19mm
s s RS Differential NB 9.5mm RVA In-line Differential NB 6 to 19mm RV Direct Acting NB up to 9mm LPR Low Pressure Differential NB 8mm We design, machine, build and test all our products on one site in
BERMAD Waterworks. Pressure-Reducing Valve. 700 Series. Model 720. Features and Benefits. Major Additional Features
Pressure-Reducing Valve Flow and leakage reduction Cavitation damage protection Throttling noise reduction Burst protection System maintenance savings The Pressure-Reducing Valve is a hydraulically-operated,
Pressure Reducing Valve DMV 750 set range: bar
Pressure Reducing Valve DMV 750 set range:.0-6.0 bar Advantage pressure setting possible at any time, also during operation hermetically sealed by valve diaphragm high level of operating safety and long
Pressure Reducing Valve DMV 755
Pressure Reducing Valve DMV 755 Nominal size DN 10 50 Nominal size 3/8 2 Nominal pressure PN 10 bar Features pressure setting range 1 to 9 bar control valve for reliable reduction of system pressures to
PP-1, PP-1W, PP-2, & PP-3
Welker Pitot Probe Model PP-1, PP-1W, PP-2, & PP-3 The information in this manual has been carefully checked for accuracy and is intended to be used as a guide for the installation, operation, and maintenance
Schroeder Check Test Point System
Perforated polyamide / kevlar hose, 2 mm ID, 5 mm OD, plastic dust cap. L in (mm) P (max) psi (bar) 6 (150) 10,000 (680) 12 (300) 10,000 (680) 24 (610) 10,000 (680) 36 (915) 10,000 (680) 48 (1220) 10,000
MEDICAL CYLINDER VALVES
MEDICAL CYLINDER VALVES 3 1 Medical integrated valve for oxygen air and medical mixture 1.1 ALIONE 1.2 ALPINOX-valve 1.3 ALPINOX-valve compact 2 Cylinder valve with RPV for oxygen and medical gases -
INSTRUMENTATION VALVES
INSTRUMENTATION VALVES INSTRUMENTATION BALL VALVES INTEGRAL-BONNET NEEDLE VALVES TOGGLE VALVES (TG Series) CHECK VALVES (CHV Series: For General Industry) RELIEF VALVES (RVL/RVH Series) INSTRUMENTATION
Index 7.1. Page R2 12/99
High Equipment Air Operated s High Equipment Company offers five lines of air operators to accommodate remote operation of pressure valves up to 00,000 psi. Various models of diaphragm and piston operated
Index 7.1. Page R2 12/99
High Equipment Air Operated s High Equipment Company offers five lines of air operators to accommodate remote operation of pressure valves up to 00,000 psi. Various models of diaphragm and piston operated
Full Range Pressure Compensating Variable Flow Control
Engineering & Manufacturing Solutions Specifications: See flow chart for capacity. Rated for 3000 psi (207 bar). Weighs 7- ¾ lbs. (3.52 kg). 30-Micron Filtration Recommended. Torque to turn side lever
Operation Manual. Diaphragm Sensed Gas Pressure Regulators
687 Technology Way Napa, CA 94558 Phone: (707) 259-0102 FAX: (707) 259-0117 www.aptech-online.com Diaphragm Sensed Gas (AP/AZ/AK Models: 20, 100, 500, 1000, 1000T 10PA, 1100, 1200, 12PA, 1300, 1400T, 14PA,
Field Adjustable Pressure Reducing (URFA)
IL JUSTL PRSSUR RUING 10-1 ield djustable Pressure Reducing (UR) lkhart s UR valve is a true pressure reducing valve, operated automatically by inner hydraulic controls. While the valves are preset at
3 & 4-Way Mixing & Diverting Valves
Applications: 3-Way Valve The ESBE VRG series of 3 & 4-way valves are designed to mix water to the appropriate temperature to meet the zone or system requirements within heating and cooling systems. The
VCO O-ring Face Se al Fit tings
www.swagelok.com O-ring Face Se al Fit tings /8 to sizes 36 or 36L stainless steel, NPT, S thread, and weld connections 2 O-ring Face Seal Fittings ontents Features........................................
BERMAD Waterworks. Level Control Valve with Bi-Level Vertical Float. 700 Series Model B. Features and Benefits. Major Additional Features
Level ontrol Valve with i-level Vertical Float Reservoir filling Very low supply-pressure Low noise generation Energy cost-critical systems Systems with poor water quality Reservoir outlet Distribution
FITTINGS THREAD LUBRICANTS. Fittings 20,000 PSI
Jetstream offers a wide variety of fittings with various connection types to fit your 20,000 psi application needs. The standard connection types, Type M, MP, and MP Tube lance, are available in standard
Series 44 Self-operated Pressure Regulators. Type 44-0 B Pressure Reducing Valve. ANSI version
Series 44 Self-operated Pressure Regulators Type 44-0 B Pressure Reducing Valve ANSI version Application Set points from 3 to 290 psi (0.2 to 20 bar) with valves ½ NPT to 1 NPT as well as NPS ½ and 1 Pressure
TBV-CM. Combined control & balancing valves for small terminal units For modulating control NPT threads
TBV-CM Combined control & balancing valves for small terminal units For modulating control NPT threads IMI TA / Control valves / TBV-CM TBV-CM Designed for use in terminal units in heating and cooling
Technical data sheet. Type overview. Technical data. Safety notes. T5-R2.. Open-close en v Subject to changes 1 / 3
Technical data sheet R2.. Open-close ball valves, 2-way, with internal thread for open and closed cold and warm water systems for shut-off functions on the water side and 2-point controls in air-handling
High-Purity. Ball Valves
High-Purity s Components MANUFACTURING ASSEMBLY TESTING HP High-Purity s CFOS Applications Cost-effective systems where cleaning for oxygen-grade services are required, such as: Clean-Dry Air (CDA), Oil-Free
AIR AND VACUUM VALVES
MINING DIVISION AIR AND VACUUM VALVES FOR HIGH FLOW K-6NS SERIES DESCRIPTION The K-6NS Series Air and Vacuum Valve discharges air during the filling or charging of the system and admits air into the system
HP/UHP Spring-Loaded Regulator
Description HP (High Purity) and UHP (Ultra High Purity) products are for service where the product must be kept free of contamination. The design is kept simple to minimise dead areas where contaminants
Regulator. Modular Type AR10 AR20 AR25 AR30 AR40 AR40-06 AR50 AR60. Pages 36 through 40 AR20K AR25K AR30K AR40K AR40K-06 AR50K AR60K
Modular Type Regulator Series R Regulator Series R Model R M5 x.8 ccessory R2 /8, /4 R /4, 3/8 R3 /4, 3/8 R4 /4, 3/8, /2 Pages 36 through 4 Regulator with back flow mechanism Series RK R4-6 R5 R6 R2K RK,
Regulator. Modular Type AR10 AR20 AR25 AR30 AR40 AR40-06 AR50 AR60. Pages 36 through 40 AR20K AR25K AR30K AR40K AR40K-06 AR50K AR60K
Modular Type Regulator Series R Regulator Series R Model R M5 x.8 ccessory R2 /8, /4 R /4, 3/8 R3 /4, 3/8 R4 /4, 3/8, /2 Pages 36 through 4 Regulator with back flow mechanism Series RK R4-6 R5 R6 R2K RK
61 Series Pilots for Pilot-Operated Pressure Reducing Regulators
61 Series Pilots for Pilot-Operated Pressure Reducing Regulators June 2011 Introduction 61 Series pilots are used with Types 1098-EGR and EZL pressure reducing regulators. These pilots can also be integrally
1/2 to 2-1/2 NPT; 0 to 230 PSI Advantages / Benefits
/-Way Angle-Seat Valve Type 000 to - NPT; 0 to 30 Advantages / Benefits Spring return closed or open, double-acting Materials: bronze, stainless steel High flow rate Self-adjusting packing glands with
2-port seat valves PN25 with externally threaded connections
4 379 2-port seat valves PN25 with externally threaded connections VVG55.. Valve body bronze CC491K (Rg5) DN 15...25 (½...1 ") kvs 0.25...6.3 m3/h Stroke 5.5 mm Sets of ALG.. with threaded and ALS.. with
M45 ISO Ball Valve DN25 to 150 Installation and Maintenance Instructions
BAC 13310 IM-P133-42 ST Issue 2 M45 ISO Ball Valve DN25 to 150 Installation and Maintenance Instructions 1. General safety information 2. General product information 3. Installation 4. Commissioning 5.
CA14 SG Iron Air and Gas Trap ½" and ¾" (Screwed)
ert. No. LRQ 9638 ISO 91 14 SG Iron ir and Gas Trap ½" and ¾" (Screwed) TI-P148-1 ST Issue 6 escription The 14 is a range of float type automatic liquid drainers for air and gas systems. The body and cover
JR Series. Gas Pressure Reducing Valves. a division of Jordan Valve GAS PRESSURE REDUCING VALVES
a division of Jordan Valve JR Series Gas Pressure Reducing Valves GAS PRESSURE REDUCING VALVES The LowFlow JR Series line of high pressure regulators have the ability to handle very high pressures and
Pressure and/or Temperature Pilot Operated Steam Regulators Series 2000
Hoffman Specialty Regulators Regulators Pressure and/or Temperature Operated Regulators Series 2000 The Hoffman Specialty Series 2000 consists of main valves, pilot valves, wells and hardware kits. They
Series Way Ball Valve Threaded. SERIES 38 3-Way. Easy to Automate! See automated data sheets for pre-sized assemblies 38-TH-0025-XXX-T
This investment cast 3-way valve can be an economical option for flow patterns that normally require multiple 2-way valves. Available in L or T port configurations, this valve is excellent for diverting
Pneumatic Powered - Plunger Pumps
Models 42/62/82 D Series P.O. Box 80769 Lafayette, LA 70598-0769 (337) 235-9838 FAX (337) 235-9852 www.sidewinderpumps.com Pneumatic Powered - Plunger Pumps Suggested Installation & Operating Instructions
Polyethylene Valves for Natural Gas.
Polyethylene Valves for Natural Gas. Providing valves and equipment to the world s energy markets for over 00 years. Polyethylene Valves Made in the U.S.A. The POLYBALL valve is manufactured at our Mansura,
Section 3000 CONVEYOR CHAIN LUBRICATION SCHEMATIC...39 AIR OPERATED SPRAY DISPENSERS - CENTRAL ACRYLIC RESERVOIR Section 3000 Index
Section 3000 AIR OPERATED SPRAY DISPENSERS - CENTRAL ACRYLIC RESERVOIR...36 Versatile type of lubrication able to feed liquid to elevated, distant or inaccessible points. CONVEYOR CHAIN LUBRICATION SCHEMATIC...39
627 Series Pressure Reducing Regulators
627 Series Pressure Reducing Regulators Introduction The 627 Series direct-operated pressure reducing regulators (Figure 1) are for low and high-pressure systems. These regulators can be used with natural
Engineered Valves Group. Revision 2. FABRI-VALVE High Performance Knife Gate Valve.
Engineered Valves Group XS 150 Revision 2 FABRI-VALVE High Performance Knife Gate Valve www.engvalves.com Fabri-Valve XS150 High Performance Knife Gate Valve XS150 High Performance Knife Gate Valve T he
2-Port and 3-Port Seat Valves with Female Thread, PN16
4 362 VVI4 VXI4 2-Port and 3-Port Seat Valves with Female Thread, PN6 VVI4... VXI4... ronze valve body CC49K (Rg5) DN5... DN50 k vs 2.5... 40 m 3 /h Female threaded connections Rp as to ISO 7/ Can be equipped
INDUSTRIAL EXCESS ESS FLOW VALVES
INDUSTRIAL EXCESS ESS FLOW VALVES H-911 SERIES FEATURES n Stainless Steel Construction n MAWP 6000 psi (413 bar) n MAWT 400 F (204 C) n Variable connection sizes (1/8 to 1/2'' & 6 to 12mm) n Cv = 0.5 ;
FOR INSTALLING CO 2 BLENDER KIT (P/N IN BEER SYSTEM
IMI CORNELIUS INC One Cornelius Place Anoka, MN 55303-623 Telephone (800) 238-3600 Facsimile (612) 22-326 INSTALLATION INSTRUCTIONS FOR INSTALLING CO 2 BLENDER KIT (P/N 111612000 IN BEER SYSTEM SECONDARY
Installation Operating Instructions for Simple Duplex Manual Manifolds PX-TSD Series
Introduction Powerex manifolds are cleaned, tested and prepared for the indicated gas service and are built in accordance with the Compressed Gas Association guidelines. The manifold consists of a regulator
Operation Manual Piston Sensed Gas Pressure Regulators
687 Technology Way Napa, CA 94558 Phone: (707) 259-0102 FAX: (707) 259-0117 www.aptech-online.com Operation Manual Piston Sensed Gas Pressure Regulators (Models KT9, KT10, Welded KT10, KT12) Table of Contents:
How to Order RM0 0 Z. IN/OUT fitting type Metric size Inch size Straight Elbow Straight Elbow Straight Elbow Straight Elbow ø ø ø ø ø ø ø ø ø/ ø/ ø/ ø
Series RM/ End lock RME Port Plug End block End block type Mounting position L Left side R Right side L side end block 0. L VVQ0000 Single unit regulator / Port plug for regulator block ø0 0 Options Note
Series variation. Silencer. High damping effect and 2 types of materials. Applicable cylinder bore size (mm) Effective sectional area (mm 2 )
Series variation High damping effect and types of materials Model / appearance Metering valve with silencer Model no. SMW-6 SMW-8 FMS-M SMW- SMW- (R) M M /8 / /8 / / / / 6 8 Effective sectional area (mm
STANDARD FOR CONTROL VALVE SEAT LEAKAGE
11-3 STANDARD FOR CONTROL VALVE SEAT LEAKAGE 1. PURPOSE 1.1 This standard establishes a series of seat leakage classes for control valves and defines the test procedures. 2. SCOPE & LIMITATIONS 2.1 Selection
Avenger Model 33M Installation & Operation Instructions
Avenger Model 33M Installation & Operation Instructions Manufacturing Contact Information A+ Corporation, LLC Call for expert product application assistance: 41041 Black Bayou Rd. Gonzales, LA 70737 Phone:
PVQ 13 A2 R SE 1 S 20 C-11 D
PVQ - Variable Displacement Piston Pump PVQ 13 A2 R SE 1 S 2 C-11 D 1 2 3 4 6 7 8 9 1 1 Model Series PVQ Inline Piston Pump Variable Volume Quiet Series 4 Rotation Viewed from shaft end R Right hand, standard
North American Simplex Basket Strainers for Gas and Oil
Combustion North American Simplex Basket Strainers for Gas and Oil A mesh lining (304 stainless standard or 316 stainless or monel special), either 20, 40 or 100 mesh, can be provided, depending on the
B2KL: 6-way ball valve with male thread, PN 16
Product data sheet 3.1 58.001 K: 6-way ball valve with male thread, PN 16 How energy efficiency is improved fficiency means precise control and low actuating forces eatures 6-way ball valve for changeover
Bladder Accumulators. General Information. Bladder Accumulators. Introduction. Accumulator Function. Why use a Bladder Accumulator?
General Information Introduction Accumulator unction Bladder accumulators provide a means of regulating the performance of a hydraulic system. The design of the Stauff bladder accumulator makes use of
THE MF-400 SERIES. Operating and Service Manual. Series includes all variants of MF-400/401
THE MF-400 SERIES Operating and Service Manual Series includes all variants of MF-400/401 Issue A October 2013 1 TABLE OF CONTENTS 1. Description... 3 2. Installation... 3 3. Operation... 4 4. Special
299H Series. Introduction. P.E.D. Categories. Specifications. Installation. Warning. Installation Guide English September 2012
Installation Guide English September 2012 299H Series Introduction This Installation Guide provides instructions for installation, startup, and adjustment of 299H Series regulators. To receive a copy of
180 Series Rotary Shear Directional Control Valve
180 Series Rotary Shear Directional Control Valve Up to l 38 lpm, 10 US gpm l 700 bar, 10,000 psi Milwaukee, WI 53235, US el: +1 (414) 769-6400 sales-us@webtec.com St. Ives, Cambs. E27 3LZ, UK el: +44
Leak testing of Valves. Standards for acceptable Rates of Valve Leakage
Leak testing of Valves Standards for acceptable Rates of Valve Leakage American Petroleum Institute (API) The API standard 598: Valve Inspection and Testing, covers the testing and inspection requirements
Type ACE97. Introduction. Installation. P.E.D. Categories. Specifications. Overpressure Protection. Installation Guide English May 2002
Installation Guide English May 2002 Type ACE97 Introduction This installation guide provides instructions for installation, startup, and adjustment. To receive a copy of the instruction manual, contact
IFP C175-* REMOTE CONTROL RELIEF VALVE
IFP C175-* REMOTE CONTROL RELIEF VLVE Low Pressure Differential Quiet Operation Easy to djust Handle Three Pressure Ranges vailable Panel Mount Design P T Model Pressure Range (PSI) Rated Flow (US GPM)
American Society of Sanitary Engineering PRODUCT (SEAL) LISTING PROGRAM
American Society of Sanitary Engineering PRODUCT (SEAL) LISTING PROGRAM ASSE STANDARD #1003 - REVISED: 2009 Water Pressure Reducing Valves for Domestic Water Distribution Systems MANUFACTURER: CONTACT
Pressure relief valve DHV 712 DN 65-80: 0,5-10 bar, DN : 0,3-4 bar, DN 100: 0,5-6 bar
Pressure relief valve DHV 7 DN 5-80: 0,5-0 bar, DN 5-00: 0, - bar, DN 00: 0,5 - bar Advantage for high pressure stability reliable reduction of pressure peaks and pulsations pressure setting possible at
VRD Series VRD40.xxxUx Double Valves for use with SKP... electro-hydraulic actuators
VRD Series VRD40.xxxUx Double Valves for use with SKP... electro-hydraulic actuators Document No. 7649 VRD40.xxxUx ISO 9001 and 14001 REGISTERED FIRM Only with series SKPxx.xxxUx actuators Description
JR Series. Gas Pressure Reducing Valve GAS PRESSURE REDUCING VALVE
JR Series Gas Pressure Reducing Valve GAS PRESSURE REDUCING VALVE The LowFlow JR Series line of high pressure regulators have the ability to handle very high pressures and very low flows. These valves
2-port and 3-port seat valves, PN16
s 4 47 VVI47 VXI47 CVTIX 2-port and 3-port seat valves, PN6 with internally threaded connections VVI47.. VXI47.. ronze valve body CC49K (Rg5) DN 5...5 k vs 2.5...4 m 3 /h Internally threaded connections
Operating instruction
Operating instruction MV, XV, HG, HP, RKO, D2G, TV, BV, WB & SLV 1 Introduction 2 2 Stafsjö s knife gate valves 2 3 Technical information 2 3.1 Pressure test 2 3.2 Labelling 2 4 Storage 3 5 Transportation
ISO Sub-bases. Port sizes G 1 /4 - G1 and 1 /4NPT - 1 /2NPT. Sub-bases tovdma specification, for ISO sizes #1, #2, #3 and #4
Port sizes 1 / - 1 and 1 /NPT - 1 /NPT Sub-bases tovd 3 specification, for ISO sizes #1, #, #3 and # Universal bases for ISO sizes #1 and #, side and bottom ported Technical Data edium: See individual
TOP ENTRY BALL VALVE CATALOG TECA9000
TOP NTRY LL VLV TLO T9000 STION N - TOP NTRY VLVS TL O ONTNTS SRIPTION P Top ntry all Valve eatures N-3 Materials List N 4-5 Seat Materials and Seat esigns N 6-7 Pressure-Temperature Ratings N 8-10 IMNSIONS