Series CB... E Single Nozzles, Open

Size: px

Start display at page:

Download "Series CB... E Single Nozzles, Open"

Edith Flynn
5 years ago
Views:

1 eries B... ingle Nozzles, Open Ø7 ompany P Products echnology A Application

Product type Hot runner nozzles in the B... range; this series belongs to nozzle class. Nozzle size : Flow bore-ø 7 mm Nozzle style : ingle nozzle eries B.

Available gating types open with torpedo ( ) K Major dimensions (mm) J D Dt H K Dk s Ds R Flow bore Ø Nozzle length Ø of cut out, front entring Ø tip Hot runner exit Ø Head height Head Ø Depth of

..815 W Fe/uNi thermocouple, DIN 43710 Y U F hape of nozzle tip Available nozzle types for this series Gating of nozzle tip N (open) (open with torpedo) V (valve gate) Y H: 1.0... Dt: Ø 7 F H: 1.0... Dt: Ø 7 Application For all usual thermoplastics Max.

for later nozzle series. tandard value resp. average diameter of nozzle range, can be different depending on nozzle series and application. Raster dimensions.

2 Product type Hot runner nozzles in the B... range; this series belongs to nozzle class. Nozzle size : Flow bore-ø 7 mm Nozzle style : ingle nozzle eries B... ingle nozzles, open P A With the nozzle tips in the form of screw-in parts, different nozzle types can be implemented (type = shape and gating of nozzle tip), see table at right. Available gating types open with torpedo ( ) K Major dimensions (mm) J D Dt H K Dk s Ds R Flow bore Ø Nozzle length Ø of cut out, front entring Ø tip Hot runner exit Ø Head height Head Ø Depth of head centring Ø of head centring Nozzle contact radius Ø7 4) Ø27 see right see right Ø53 Ø Heating externally heated, 230 V A zones, W Fe/uNi thermocouple, DIN Y U F hape of nozzle tip Available nozzle types for this series Gating of nozzle tip N (open) (open with torpedo) V (valve gate) Y H: Dt: Ø 7 F H: Dt: Ø 7 Application For all usual thermoplastics Max. shot weight per nozzle (g) 150 (low viscosity) P K H: Dt: Ø 7 4) 5) page no. of related data sheets nhanced classification for improved ease of selection. Part of the nozzle type No. for later nozzle series. tandard value resp. average diameter of nozzle range, can be different depending on nozzle series and application. Raster dimensions. Intermediate values can be found from the prescribed dimensional raster. Minimum and maximum value of nozzle length depend on the selected tip shape. depending on nozzle length V W X W H: Dt: Ø 14 X H: Dt: Ø All rights reserved. rrors and omissions excepted. For a specific application, please consult ynventive. 1 / see the ynventive Hot Runner Guide.

3 1. ut out for the nozzle Nozzle length 1 eries B... ut out in mould plate for nozzle and connections P A 1.6 A 1 x 45 2 General tolerances: urfaces: DIN IO 2768-mK ( ) 4 3 Values of the dimension can be found in the data sheet for the selected nozzle type. B ±0.05 ± A B 2. ut out for connections electrical power thermocouple Groove for locking pin he locking pin secures the nozzle against rotation. 3 3 H7 4. ut out for the nozzle tip a) b) hrough bore nozzle tip (Y...V) Blind bore nozzle tip (W, X) 4 a) b) Dt H ip Ø Hot runner gate Ø Depending on the selected nozzle type, different cut outs are required for the nozzle tip. he dimensions of the cut out for the nozzle tip used can be found in the nozzle data sheet hese data apply for valve gate nozzles. Ø0.02 A Ø0.02 A Ø All rights reserved. rrors and omissions excepted. For a specific application, please consult ynventive. 2 / see the ynventive Hot Runner Guide.

4 Y B Y P A 1. omplete the nozzle description B Y eries & ype 2. election of variables ength code = equal to the value of the length code for this series ±0.05 xample and explanations eries B eries & ype Y ype length chart 0 ength code = Y Nozzle tip shape Y for materials with narrow to medium process window Gating type : open with torpedo ut out in mould plate ooling required he front of the nozzle tip must always be against plastic. DIN IO 2768-mK he numbering of the heating zones starts at All rights reserved. rrors and omissions excepted. For a specific application, please consult ynventive. ength 1 2 Heater zones power / see the ynventive Hot Runner Guide.

5 F B F P A 1. omplete the nozzle description B F eries & ype 2. election of variables ength code = equal to the value of the length code for this series ±0.05 xample and explanations eries B eries & ype F ype length chart 0 ength code 0.6 = F Nozzle tip shape F for materials with narrow to medium process window Gating type : open with torpedo 0 ut out in mould plate ooling required he front of the nozzle tip must always be against plastic. DIN IO 2768-mK he numbering of the heating zones starts at All rights reserved. rrors and omissions excepted. For a specific application, please consult ynventive. ength 1 2 Heater zones power / see the ynventive Hot Runner Guide.

6 B P A 1. omplete the nozzle description B eries & ype 2. election of variables ength code = F= equal to the value of the length code for this series ±0.05 xample and explanations eries B eries & ype ype length chart 0 ength code F min. max = Nozzle tip shape for materials with narrow to medium process window Gating type : open with torpedo 10 F= 0 min. ut out in mould plate ooling required he front of the nozzle tip must always be against plastic. DIN IO 2768-mK F (mm) 10 he numbering of the heating zones starts at All rights reserved. rrors and omissions excepted. For a specific application, please consult ynventive. ength 1 2 Heater zones power / see the ynventive Hot Runner Guide.

7 W B W P A 1. omplete the nozzle description B W eries & ype 2. election of variables ength code = equal to the value of the length code for this series ±0.05 xample and explanations = eries B eries & ype W W ype Nozzle tip shape W length chart 0 ength code for materials with narrow to medium process window Gating type : open with torpedo 4.8 R6 Ra max. R a ut out type B tandard for W01 ut out in mould plate ooling required DIN IO 2768-mK Ra (mm) for H = a (mm) for H = he numbering of the heating zones starts at All rights reserved. rrors and omissions excepted. For a specific application, please consult ynventive. ength 1 2 Heater zones power / see the ynventive Hot Runner Guide.

8 W B W P A 1. omplete the nozzle description B W eries & ype 2. election of variables ength code = equal to the value of the length code for this series ±0.05 xample and explanations = eries B eries & ype W W ype Nozzle tip shape W length chart 0 ength code for materials with narrow to medium process window Gating type : open with torpedo R7 R0.5 0 max. R ut out type for improved colour change ut out in mould plate ooling required DIN IO 2768-mK he numbering of the heating zones starts at All rights reserved. rrors and omissions excepted. For a specific application, please consult ynventive. ength 1 2 Heater zones power / see the ynventive Hot Runner Guide.

9 X B X P A 1. omplete the nozzle description B X eries & ype 2. election of variables ength code = equal to the value of the length code for this series ±0.05 xample and explanations = X eries B eries & ype X ype Nozzle tip shape X for materials with medium to wide process window length chart 0 ength code Gating type : open with torpedo 4.8 R6 0 max. R ut out type A tandard for X01 ut out in mould plate ooling required DIN IO 2768-mK he numbering of the heating zones starts at All rights reserved. rrors and omissions excepted. For a specific application, please consult ynventive. ength 1 2 Heater zones power / see the ynventive Hot Runner Guide.

10 X B X P A 1. omplete the nozzle description B X eries & ype 2. election of variables ength code = equal to the value of the length code for this series ±0.05 xample and explanations = X eries B eries & ype X ype Nozzle tip shape X for materials with medium to wide process window length chart 0 ength code Gating type : open with torpedo R7 R0.5 0 max. R ut out type for improved colour change ut out in mould plate ooling required DIN IO 2768-mK he numbering of the heating zones starts at All rights reserved. rrors and omissions excepted. For a specific application, please consult ynventive. ength 1 2 Heater zones power / see the ynventive Hot Runner Guide.

AU - Australia +61 3 886 3475 diepro@optusnet.com.au BR - Brasil - Brazil +55 (0)11 611 3433 synventive@uol.com.br A - anada +1 514-421-863 +1 604-43-7702 N - People's Republic of hina +86 512 62838870 +86 755 82315175 lutek@lutek.

11 AU - Australia diepro@optusnet.com.au BR - Brasil - Brazil +55 (0) synventive@uol.com.br A - anada N - People's Republic of hina lutek@lutek.ca ahmed@dccnet.com infohrcn@synventive.com Z - zech Rebpublic infohrcz@synventive.com D - Germany +4 (0) infohrde@synventive.com DK - Denmark infohrsc@synventive.com - pain infohres@synventive.com FI - Finland +358(0) cle@clegroup.fi FR - France +33 (0) infohrfr@synventive.com GB - Great Britain +44 (0) infohruk@synventive.com I - Israel adb2@barak.net.il IN - India infohrin@synventive.com I - Italy infohrit@synventive.com JP - Japan jminamizono@synventive.com N - he Netherlands +31 (0) infohrnl@synventive.com P - Poland +48 (0) infohrpl@synventive.com P - Portugal infohrp@synventive.com G - ingapore infohrsg@synventive.com K - lovak Republic +421 (0) infohrsk@synventive.com U - United tates of America info@synventive.com

AREA TOTALS OECD Composite Leading Indicators. OECD Total. OECD + Major 6 Non Member Countries. Major Five Asia. Major Seven.

AREA TOTALS OECD Composite Leading Indicators. OECD Total. OECD + Major 6 Non Member Countries. Major Five Asia. Major Seven. Reference series Composite leading indicators OECD Composite Leading Indicators AREA TOTALS 7-03- 19 OECD Total 19 OECD + Major 6 Non Member Countries 19 Major Seven 19 Major Five Asia 19 Euro area 19