StormPRO & SewerPRO. Twin-Walled Corrugated Polypropylene Pipe and Fittings System for Non-Pressure Applications LIGHT WEIGHT
|
|
- Muriel Riley
- 6 years ago
- Views:
Transcription
1 StormPRO & SewerPRO Twin-Walled Corrugated Polypropylene Pipe and Fittings System for Non-Pressure Applications LIGHT WEIGHT EASY TO HANDLE - COST EFFECTIVE TO INSTALL SIMPLE & EFFECTIVE JOINTS ADAPTS TO SOIL MOVEMENT DOMESTIC OR INDUSTRIAL APPLICATIONS USED IN AGGRESSIVE OR SALINE SOILS Quality ISO 9001 Lic 570
2 VINIDEX STORMPRO AND SEWERPRO CORRUGATED POLYPROPYLENE PIPE SYSTEM. A full system solution in sizes from DN150 to DN900. Lower total installed cost Lightweight product easy to handle Less heavy lifting equipment required Pipes easy to cut Ease of jointing Introducing the improved PRO2 joint. Reduced jointing forces Enhanced joint performance under adverse soil movement and deflection conditions New rubber ring design The new PRO2 joint is not compatible with the old joint or rubber rings. Make sure you only use fittings labelled PRO2 with PRO2 pipes to ensure dimensional compatibility and system performance. Note that systems may not be leak tight if PRO2 fittings are not used. PRO2 sockets should only be joined using PRO2 rubber rings Optimum hydraulic performance Smooth inner skin for hydraulic flow Surface resistant to buildup Can be used in aggressive or saline soils Sensitive to the environment Light internal colour to facilitate video inspection Complete range of fittings Polypropylene (PP), Polyethylene (PE) and polyvinyl chloride () materials are used in PRO fittings. All fittings are SN8 minimum. offers a range of adaptors to connect to non PRO systems. Special fittings can also be provided you should contact. Note that fittings DN450 and larger are generally not stocked. Contact sales for price and availability. StormPRO Fittings, Accessories and Tools also offers fittings, accessories and tools specifically designed for StormPRO applications. The PROgrommet is a quick and easy system to install 100mm and 150mm connections to Storm- PRO pipe. The PROsaw has been specifically designed to accommodate the PRO rib height and for simple installation of the PROgrommet. 1
3 PRODUCT RANGE StormPRO Polypropylene Pipe Nominal 6m Length Nominal Diameter Comments StormPRO2 SN8 PP 6.02m StormPRO2 SN8 PP 5.99m StormPRO2 SN8 PP 5.94m StormPRO2 SN8 PP 5.93m StormPRO2 SN8 PP 5.95m StormPRO2 SN8 PP 5.89m StormPRO2 SN8 PP 5.85m StormPRO2 SN8 PP 5.92m Reduced Spigot StormPRO2 SN8 PP 5.91m Reduced Spigot Available in other lengths for projects Sufficient Lubricant is supplied with pipe. Additional Lubricant may be ordered if required. SewerPRO Polypropylene Pipe Nominal 3m Length Nominal Diameter Comments SewerPRO2 SN10 PP 2.95m SewerPRO2 SN10 PP 2.92m SewerPRO2 SN10 PP 2.87m SewerPRO2 SN10 PP 2.86m SewerPRO2 SN10 PP 2.86m SewerPRO2 SN10 PP 2.80m SewerPRO2 SN10 PP 2.76m SewerPRO2 SN10 PP 2.82m Reduced Spigot SewerPRO2 SN10 PP 2.81m Reduced Spigot Available in other lengths for projects PP PRO Shorts PRO MHole SP SN10 600mm PP PRO MHole SP SN10 600mm PP PRO MHole SP SN10 600mm PP PRO MHole SP SN10 600mm PP PRO MHole SP SN10 600mm PP PRO MHole SP SN10 600mm PP PRO MHole SP SN10 600mm PP PRO MHole SP SN10 600mm PP 2
4 Rubber Rings Rubber rings are normally supplied with all pipes and fittings. Additional rubber rings may be ordered separately if required. DN PRO2 PP Ring EPDM PRO2 PP Ring EPDM PRO2 PP Ring EPDM PRO2 PP Ring EPDM PRO2 PP Ring EPDM PRO2 PP Ring EPDM PRO2 PP Ring EPDM PRO2 PP Ring EPDM PRO2 PP Ring EPDM Rubber Rings for use with Slip Couplings DN PRO2 PP SlipCoup Ring EPDM PRO2 PP SlipCoup Ring EPDM and PE PRO Couplings PRO Coupling SN PRO Coupling SN PRO Coupling SN PRO Coupling SN PRO Coupling RMPE Contact PRO Coupling RMPE Contact PRO Coupling RMPE Contact PE PRO Slip Couplings PRO Slip Coupling SN PRO Slip Coupling SN PRO Slip Coupling SN PRO Slip Coupling SN PRO Slip Coupling RMPE Contact PRO Slip Coupling RMPE Contact PRO Slip Coupling RMPE Contact PRO Slip Coupling PE Contact PRO Slip Coupling PE Contact 3
5 15 Degree PRO Bends PRO Bend 15D SN8 FF Contact PRO Bend 15D SN8 FF Contact PRO Bend 15D SN8 FF Contact PRO Bend 15D SN8 FF Contact 22.5 Degree PRO Bends PRO Bend 22.5D SN8 FF Contact PRO Bend 22.5D SN8 FF Contact PRO Bend 22.5D SN8 FF Contact PRO Bend 22.5D SN8 FF Contact M&F PP 30 Degree PRO Bends PRO Bend 30D SN8 FF Contact PRO Bend 30D SN8 FF Contact PRO Bend 30D SN8 FF Contact PRO Bend 30D SN8 FF Contact PRO Bend 30D SN10 MF PP Contact PRO Bend 30D SN10 MF PP Contact F&F PP 45 Degree PRO Bends PRO Bend 45D SN10 FF PP PRO Bend 45D SN8 FF PRO Bend 45D SN8 FF PRO Bend 45D SN8 FF PRO Bend 45D SN10 MF PP Contact PRO Bend 45D SN10 MF PP Contact PRO Bend 45D SN10 MF PP Contact PRO Bend 45D SN10 MF PP Contact PRO Bend 45D SN10 MF PP Contact M&F PP 4
6 PP 88 Degree PRO Bends PRO Bend 88D SN10 FF PP PRO Bend 88D SN8 FF PRO Bend 88D SN8 FF PRO Bend 88D SN8 FF PRO Bend 88D SN10 MF PP Contact PRO Bend 88D SN10 MF PP Contact PRO Bend 88D SN10 MF PP Contact PRO Bend 88D SN10 MF PP Contact PRO Bend 88D SN10 MF PP Contact M&F PP PP 45 Degree PRO Junctions PRO Jun 45D SN10 FF PP x x150 PRO Jun 45D SN8 FF PRO Jun 45D SN8 FF x x150 PRO Jun 45D SN8 FF x x225 PRO Jun 45D SN8 FF PRO Jun 45D SN8 FF x x150 PRO Jun 45D SN8 FF x x225 PRO Jun 45D SN8 FF x x300 PRO Jun 45D SN8 FF PRO Jun 45D SN8 FF PRO Jun 45D SN10 MF PP Contact x x375 PRO Jun 45D SN10 MF PP Contact PRO Jun 45D SN10 MF PP Contact PRO Jun 45D SN10 MF PP Contact PRO Jun 45D SN10 MF PP Contact PRO Jun 45D SN10 MF PP Contact M&F PP 5
7 45 Degree PRO Junction Adaptor to DWV x x100 PROJun45D SN8 FF SWJ x PROJun45D SN8FF RRJ PP 88 Degree PRO Junctions PRO Jun 88D SN10 FF PP x x150 PRO Jun 88D SN8 FF PRO Jun 88D SN8 FF x x150 PRO Jun 88D SN8 FF x x225 PRO Jun 88D SN8 FF PRO Jun 88D SN8 FF x x150 PRO Jun 88D SN8 FF x x225 PRO Jun 88D SN8 FF x x300 PRO Jun 88D SN8 FF PRO Jun 88D SN8 FF x x375 PRO Jun 88D SN10 MF PP Contact PRO Jun 88D SN10 MF PP Contact PRO Jun 88D SN10 MF PP Contact PRO Jun 88D SN10 MF PP Contact PRO Jun 88D SN10 MF PP Contact PRO Jun 88D SN10 MF PP Contact M&F PP 6
8 PP M&F PP PRO Tees PRO Tee SN10 FF PP x x150 PRO Tee SN8 FF PRO Tee SN8 FF x x150 PRO Tee SN8 FF x x225 PRO Tee SN8 FF PRO Tee SN8 FF x x150 PRO Tee SN8 FF x x225 PRO Tee SN8 FF x x300 PRO Tee SN8 FF PRO Tee SN8 FF x x150 PRO Tee SN10 MF PP Contact x x225 PRO Tee SN10 MF PP Contact x x300 PRO Tee SN10 MF PP Contact x x375 PRO Tee SN10 MF PP Contact PRO Tee SN10 MF PP Contact PRO Tee SN10 MF PP Contact PRO Tee SN10 MF PP Contact PRO Tee SN10 MF PP Contact PRO Tee SN10 MF PP Contact PP PRO Inspection Tees x PRO InspTee SN10 FF PP x x150 PRO InspTee SN8 FF x x150 PRO InspTee SN8 FF x x150 PRO InspTee SN8 FF PRO Level Invert Tapers x x150 PRO LITaper SN8 FF x x150 PRO LITaper SN8 FF x x225 PRO LITaper SN8 FF x x225 PRO LITaper SN8 FF x PRO LITaper SN8 FF 7
9 PP and PE PRO Push On Caps PRO Push on Cap PP PRO Push on Cap PP PRO Push on Cap PRO Push on Cap PRO Push on Cap RMPE Contact PRO Push on Cap RMPE Contact PRO Push on Cap RMPE Contact PRO Adaptor Couplings - PRO to DWV SWJ PRO Coupling SN8 SWJ PRO Coupling SN8 SWJ PRO Coupling SN8 SWJ PRO Coupling SN8 SWJ PRO Adaptor Couplings - PRO to DWV RRJ PRO Coupling SN8 RRJ PRO Coupling SN8 RRJ PRO Coupling SN8 RRJ PRO Coupling SN8 RRJ PRO Adaptor Couplings - PRO to Ultra Rib PRO Coupling URib SN PRO Coupling URib SN PRO Coupling URib SN PRO Coupling URib SN8 PRO Adaptor Couplings - PRO Spigot to DWV SWJ Socket (DWV socket has thread for access cap) x x100 PRO LIT M-DWV F no cap 8
10 PRO Adaptor Couplings - PRO Spigot to DWV SWJ Socket PRO Access Coup DWV F +cap PRO Adaptor Couplings - PRO to DWV Spigot SP-PRO SOC SN8 Adap SP-PRO SOC SN8 Adap SP-PRO SOC SN8 Adap SP-PRO SOC SN8 Adap Stormwater Applications Only Stormwater 90 PRO Elbows PRO Elbow 90D SN8 FF PRO Elbow 90D SN8 FF PRO Elbow 90D SN8 FF 45 Degree Stormwater Junctions x x150 PRO Jun 45D SN10 MF PP Contact x x225 PRO Jun 45D SN10 MF PP Contact x x300 PRO Jun 45D SN10 MF PP Contact PE 88 Degree Stormwater Junctions x x150 PRO Jun 88D SN10 MF PP Contact x x225 PRO Jun 88D SN10 MF PP Contact x x300 PRO Jun 88D SN10 MF PP Contact PE (For use with StormPRO Only) PROgrommet / / PROgrommet / / PROgrommet /450/ /450/ PROgrommet /450/ /450/ PROgrommet /750/ /750/ PROgrommet PROsaw Diameter PRO Saw Diameter PRO Saw 9
11
12 Pty Limited ABN HEAD OFFICE Level 4, 26 College Street Darlinghurst NSW 2010 PO Box 747, Darlinghurst NSW 1300 Reception: CUSTOMER SERVICE Phone: Fax: sales@vinidex.com.au Web: AUSTRALIAN OPERATIONS Sydney 254 Woodpark Rd Smithfield NSW 2164 Adelaide 9 11 Kaurna Ave Edinburgh SA 5111 Townsville 18 Enterprise Ave Bohle QLD 4816 Darwin 61 Marjorie St Pinelands NT 0829 Wagga Wagga 280 Byrnes Rd Wagga Wagga NSW 2650 Launceston Toowoomba Perth Sainsbury Rd O Connor WA Thistle St Sth Launceston TAS 7249 Lot 2 Witmack Rd Wellcamp QLD 4350 Melbourne Unit 1, 10 Duerdin St Notting Hill VIC 3168 Brisbane 224 Musgrave Rd Coopers Plains QLD 4108 Rodney Industries 19 Valente Close Chermside QLD St Albans Rd Sunshine VIC 3020 Limitation of Liability This product catalogue has been compiled by Pty Limited ( the Company ) to promote better understanding of the technical aspects of the Company s products to assist users in obtaining from them the best possible performance. The product catalogue is supplied subject to acknowledgement of the following conditions: 1 The product catalogue is protected by copyright and may not be copied or reproduced in any form or by any means in whole or in part without prior consent in writing by the Company. 2 Product specifications, usage data and advisory information may change from time to time with advances in research and field experience. The Company reserves the right to make such changes at any time without further notice. 3 Correct usage of the Company s products involves engineering judgements, which can not be properly made without full knowledge of all the conditions pertaining to each specific installation. The Company expressly disclaims all and any liability to any person whether supplied with this publication or not in respect of anything and all of the consequences of anything done or omitted to be done by any such person in reliance whether whole or part of the contents of this publication. 4 No offer to trade, nor any conditions of trading, are expressed or implied by the issue of content of this product catalogue. Nothing herein shall override the Company s Condition of Sale, which may be obtained from the Registered Office or any Sales Office of the Company. 5 This product catalogue is and shall remain the property of the Company, and shall be surrendered on demand to the Company. 6 Information supplied in this product catalogue does not override a job specification, where such conflict arises; consult the authority supervising the job. Copyright Pty Limited. VIN
StormPRO & SewerPRO. Twin-Walled Corrugated Polypropylene Pipe and Fittings System for Non-Pressure Applications LIGHT WEIGHT
Twin-Walled Corrugated Polypropylene Pipe and Fittings System for Non-Pressure Applications LIGHT WEIGHT EASY TO HANDLE - COST EFFECTIVE TO INSTALL SIMPLE & EFFECTIVE JOINTS ADAPTS TO SOIL MOVEMENT DOMESTIC
More informationTwin-Walled Corrugated Polypropylene Pipe and Fittings System for Non-Pressure Applications
StormPRO & SewerPRO Twin-Walled Corrugated Polypropylene Pipe and Fittings System for Non-Pressure Applications LIGHT WEIGHT EASY TO HANDLE - COST EFFECTIVE TO INSTALL SIMPLE & EFFECTIVE JOINTS ADAPTS
More informationEUROFLO CULVERT PIPE. Fittings / Pipes
EUROFLO CULVERT PIPE Fittings / Pipes F EUROFLO FITTINGS RUBBERS SIZE CODE COMMENT 160 OD 200 OD 250 OD 315 OD 400 OD 500 OD 630 OD 800 OD 1000 OD 1200 OD 1550 OD 1750 OD 1950 OD 520-160-RBR 520-200-RBR
More informationEUROFLO CULVERT PIPE. Fittings / Pipes
EUROFLO CULVERT PIPE Fittings / Pipes F EUROFLO FITTINGS RUBBERS SIZE CODE COMMENT 250 OD 315 OD 400 OD 500 OD 630 OD 800 OD 1000 OD 1200 OD 520-250-RBR 520-315-RBR 520-400-RBR 520-500-RBR 520-630-RBR
More informationLevel 1. Certificate of Conformity. Australian Certification Services Pty Ltd grants to the WaterMark User: Uponor GmbH. Trading as UPONOR Q & E
Level 1 Certificate of Conformity Australian Certification Services Pty Ltd grants to the WaterMark User: Uponor GmbH Trading as UPONOR Q & E the right to use the WaterMark as shown above in conjunction
More informationHumeCeptor system Installation guide. Issue 2
HumeCeptor system Installation guide Issue 2 Purpose of this guide This guide outlines the construction procedures and requirements for the installation of the HumeCeptor system. This document should be
More informationDecant Filling of Gas Cylinders
Safety Advice No. 18 Document No. 142-018 (Version 06) Decant Filling of Gas Cylinders ANZIGA ANZIGA is the peak industry group for the manufacture and distribution of gases in Australia and New Zealand.
More information104 Chamber System Ostendorf. Ostendorf. Chamber System ISO RV-Systém OSMA
104 Chamber System Ostendorf Ostendorf Chamber System ISO 9001 RV-Systém OSMA Ostendorf Chamber System 105 Ostendorf Chamber System The Ostendorf Chamber System is multifunctional enough to offer suitable
More informationSPECIFICATIONS & INSTALLATION GUIDE ANOTHER QUALITY PRODUCT BY FORZA GLOBAL WATER CRIMP EDITION: 0001
WATER CRIMP TM SPECIFICATIONS & INSTALLATION GUIDE ANOTHER QUALITY PRODUCT BY FORZA GLOBAL EDITION: 0001 2 WATER CRIMP FORZA GLOBAL are the manufacturers and distributors of FORZA PE-Xa PIPING Systems
More informationQuality Plastic Pipe Fittings. Technical Data. Fabricated PVC Fittings IPS Class 100, 125, 160, 200 SCH 40 & SCH 80 Solvent Weld & Gasketed
Quality Plastic Pipe Fittings Technical Data Fabricated PVC Fittings IPS Class 100, 125, 160, 200 SCH 40 & SCH 80 Solvent Weld & Gasketed Effective April 1, 2002 PIPE DIMENSIONS IPS-IRON PIPE SIZE Minimum
More informationLevel 1. Certificate of Conformity. Australian Certification Services Pty Ltd grants to the WaterMark User: Uponor GmbH. Trading as Uponor GmbH
Level 1 Certificate of Conformity Australian Certification Services Pty Ltd grants to the WaterMark User: Uponor GmbH Trading as Uponor GmbH the right to use the WaterMark as shown above in conjunction
More informationPressure relief valve DHV 716 set range: 0,5-10,0 bar
Pressure relief valve DHV 7 set range: 0,5-0,0 bar Advantage pressure setting possible at any time, also during operation optimum monitoring valves high reproducibility of the set pressure high level of
More informationInspection Chambers Project
Inspection Chamber Project Details Project Name Inspection Chambers Project Client Name Wavin Site ddress Parsonage Way, Chippenham, SN15 5PN Produced y dmin 3 Date 29/03/2017 Your components - Calc Ref
More informationSPECIFICATIONS & INSTALLATION GUIDE ANOTHER QUALITY PRODUCT BY FORZA GLOBAL WATER CRIMP EDITION: 0001
WATER CRIMP TM SPECIFICATIONS & INSTALLATION GUIDE ANOTHER QUALITY PRODUCT BY FORZA GLOBAL EDITION: 0001 2 WATER CRIMP FORZA GLOBAL are the manufacturers and distributors of FORZA PE-Xa PIPING Systems
More informationPVC Push Fit System. No glue. No wait. Just push and go.
PVC Push Fit System No glue. No wait. Just push and go. Join the revolution. A technical leader for over 50 years, LASCO fittings are relied upon worldwide. Now with the launch of their revolutionary
More informationLASCO Schedule 40 PVC Fittings
LASCO Schedule 40 PVC Fittings A technical leader for over 65 years, LASCO fittings are relied upon worldwide and hold a reputation for quality products, innovation and technical leadership. Product Range
More informationExtract from TELECOMMUNICATIONS PERFORMANCE MONITORING REPORT No. 66 September Quarter 2009
Extract from TELECOMMUNICATIONS PERFORMANCE MONITORING REPORT No. 66 Optus Regulatory Affairs September 2009 SingTel Optus Pty Limited ABN 90 052 833 208 2 Telecommunications Performance Monitoring Report
More informationPressure relief valve DHV 725 set range: 0,2-10,0 bar
Pressure relief valve DHV 75 set range: 0, - 0,0 bar Advantage pressure setting possible at any time, also during operation optimum monitoring valves high reproducibility of the set pressure high level
More informationTRANSFER OF OWNERSHIP
Principal Racing Authorities General What is a Principal Racing Authority (PRA)? A PRA is the body, statutory or otherwise, that has the control and general supervision of racing within a State or Territory,
More informationAVK SERIES 601, 602, 603 & 605 UNIVERSAL COUPLINGS, ADAPTORS & END CAPS INSTALLATION, OPERATION & MAINTENANCE MANUAL
Instruction for use Thank you for selecting an AVK product. With correct use, the product is guaranteed to deliver a long and reliable service. This manual has been prepared to assist you with the installation,
More informationPressure Relief Valve DHV 718
Advantages frictionless components low maintenance low pressure increase up to fully opened valve constant low vibration controlling hermetically sealed by diaphragm for oscillating pumps for viscous media
More informationPVC DWV FITTINGS PVC-0312 MARCH 2012 SUPERCEDES PVC-0112 ASTM D2665
PVC DWV FITTINGS PVC-0312 MARCH 2012 SUPERCEDES PVC-0112 ASTM D2665 COUPLING (Hub x Hub) 434043 1 1/4 50 10200 9.04 431130 1 1/2 100 10800 2.04 431148 2 75 5400 2.66 431155 3 50 1500 9.16 431163 4 35
More informationPresence PR, PRC & PRE
Presence PR, PRC & PRE Instructions for Use www.airliquide.com www.airliquidehealthcare.com.au CONTENT 1. Inspection checks to be performed by the User before initial use 2. Operational Information 2.1
More informationCPVC Transition Fittings - Female Adapter. CPVC X LEAD FREE BRASS Lead Free Max working pressure F ASTM D 2846
CPVC Transition Fittings - Female Adapter STD4703BTLF12 1/2 CPVC X 1/2 FIP 25 250 CPVC Transition Fittings - Female Adapter STD4703BTLF34 3/4 CPVC X 3/4 FIP 25 250 CPVC Transition Fittings - Female Adapter
More information-Proline Polypropylene Single Wall Piping
EFFECTIVE: 6/01/11 Industrial Piping Systems Dimensional Guide #PDIM Proline Super Proline Single Chemical Wall Grade Piping PVDF System -Proline Single Wall Piping s 3 r z s www.asahi-america.com Dimensions
More informationRisk Assessment System Utilised at the George Fisher Mine for Lateral and Vertical Development
Risk Assessment System Utilised at the George Fisher Mine for Lateral and Vertical Development Author: V. Clay Wittchen Planning Superintendent Xstrata Zinc / Mount Isa Mines George Fisher Mine Contact
More informationMATERIALS FOR PLUMBING SYSTEMS FITTING AND INSTALLATION GUIDE
MATERIALS FOR PLUMBING SYSTEMS FITTING AND INSTALLATION GUIDE THINK GLOBALLY, ACT LOCALLY CONTENTS Propex DZR fittings and pex 2 Why depend on Propex hot and cold piping system 3 Cross linked polyethylene
More informationPE PIPE SYSTEMS VIADUX VERSION 1.0
PE PIPE SYSTEMS VIADUX VERSION 1.0 OVERVIEW Viadux s ADVANTAGE is a high strength PE100 Polyethylene piping system and can be used for conveying all types of liquids, slurries and gases. Some of the common
More informationFIBERGLASS MULTI-GARD MULTI-CELL RACEWAY
FIBERGLASS MULTI-GARD MULTI-CELL RACEWAY Heavy Wall Bullet Resistant Bends Terminators Couplings Adapters Expansion Joints Epoxy Kits Spacers 23240 Chagrin Blvd Suite 405 Cleveland, OH 44122 216-464-3400
More informationSkolan Safe Soundproof pipe system Delivery range 2018
www.skolan-safe.de Skolan Safe Soundproof pipe system Delivery range 2018 Gebr. Ostendorf Kunststoffe GmbH Rudolf-Diesel-Straße 6 8 49377 Vechta Germany Phone +49 (0) 4441 874-10 Fax +49 (0) 4441 874-15
More informationDuoSafe. DuoSafe Inch Systems. Larger sizes on request
pvc-u and pvc-c DuoSafe DuoSafe systems are manufactured from rigid PVC-U or rigid PVC-C, with containment pipe options including grey or clear PVC-U, PVC-C, ABS or Polyethylene. They are ideal for above
More informationtubepress press procedure
tubepress press procedure tubepress 15mm up to 35mm tubepress 15 mm up to 35 mm 1. The tube ends must be clean with no scratches or grooves. Remove end caps. Cut tube to length. 2. Deburr tube inside and
More informationRain Barrels. Did You Know?
Rain Barrels Rain barrels are water storage units designed to collect water from impermeable surfaces like roofs. The most common type of rain barrel collects runoff from roofs by connecting to gutter
More informationPressure Reducing Valve DMV 750 set range: bar
Pressure Reducing Valve DMV 750 set range:.0-6.0 bar Advantage pressure setting possible at any time, also during operation hermetically sealed by valve diaphragm high level of operating safety and long
More informationTROPHY CABINET. STATE LONG COURSE RELAY CHAMPIONSHIP David Pope Memorial Trophy 2007 Doncaster Dolphins
TROPHY CABINET STATE LONG COURSE RELAY CHAMPIONSHIP David Pope Memorial Trophy 2007 Doncaster Dolphins VICTORIAN LONG COURSE MASTERS SWIMMING CHAMPIONSHIPS Country Club Champions Donated by Powerpoints
More informationCONNECTION > Super-rapid fittings Series 6000 GENERAL DATA. Fitting with connecting tube. Sprint
Super-rapid fittings for plastic tubes Series 6000 Sprint Tube external diameters: 3,, 5, 6, 8, 10, 12, 1, 16 mm Fittings threads: metric (M3, M5, M6, M7), BSP (G1/8, G1/, G3/8, G1/2, G3/), BSPT (R1/8,
More informationPipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
More informationMAGNA-CHEM AUTOMATIC CHLORINATOR - MODEL: CSA-2P MAGNA ORP Chlorine Pump
A. PARTS MAGNA-CHEM AUTOMATIC CHLORINATOR - MODEL: CSA-2P MAGNA ORP Chlorine Pump Assembly & Operating Instructions Parts for liquid chlorine pump head 1pc. 1/4 poly delivery tubing, 4 meters 1pc. drum
More informationPressure Reducing Valve DMV 755 set range: 1,0-9,0 bar
Pressure Reducing Valve DMV 755 set range:,0-9,0 bar Advantage pressure setting possible at any time, also during operation high reproducibility of the set pressure high level of operating safety and long
More informationTorque Specifications
SENR3130-10 Torque Specifications All Caterpillar Products S/N From the library of Barrington Diesel Club CONTENT General Information 01/07/2005 Introduction to Torque 01/07/2005 Torque-Turn 01/07/2005
More informationPressure Reducing Valve DMV 755
Pressure Reducing Valve DMV 755 Nominal size DN 10 50 Nominal size 3/8 2 Nominal pressure PN 10 bar Features pressure setting range 1 to 9 bar control valve for reliable reduction of system pressures to
More informationTHE PROCESS OF JOINT INTEGRITY
BOLTED JOINTS A.333 THE PROCESS OF JOINT INTEGRITY To assist in managing a process, ask yourself the following questions: why, what, who, and how? Why do we need a Flange Joint Integrity program? This
More informationABS DWV FITTINGS BOW INDUSTRIAL CORPORATION
JANUARY 31, 2011 SUPERCEDES ABS-0111 ASTM D2661 BOW INDUSTRIAL CORPORATION CHAMPLAIN, NY USA TEL: 800.852.8527 info@bow-group.com FAX: 800.526.5668 www.bow-group.com JANUARY 31, 2011 Page 1 COUPLING (Hub
More informationFP McCann Tunnels and Shafts 1
FP M c Cann FP McCann Tunnels and Shafts 1 The McCann range of shaft and tunnel products have been developed to meet the requirements of the latest industry standards which include the British Tunnelling
More informationPressure relief valve DHV 712 DN 65-80: 0,5-10 bar, DN : 0,3-4 bar, DN 100: 0,5-6 bar
Pressure relief valve DHV 7 DN 5-80: 0,5-0 bar, DN 5-00: 0, - bar, DN 00: 0,5 - bar Advantage for high pressure stability reliable reduction of pressure peaks and pulsations pressure setting possible at
More informationSEries 29 Hydrant valves installation, operation & maintenance manual
Instruction for use Thank you for selecting an AVK product. With correct use, it will give long and reliable service. This manual has been prepared to assist you install, operate and maintain the valve
More informationPressure Reducing Valve DMV 750
ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 D-32602 Vlotho Fon +49 (0) 57 33-7 99-0 Fax +49 (0) 57 33-7 99-2 00 www.asv-stuebbe.de contact@asv-stuebbe.de Pressure Reducing Valve DMV 750 Advantages reduction
More informationInserta Products, Inc.
CODE 6 & 6 -BOLT SPLIT TYPE The INSERTA CODE 6 and CODE 6 -Bolt, Split Flange Type, Modular Connectors, are used in integrated hydraulic systems in place of welded and threaded pipe fittings. These are
More informationA GUIDE TO AUSTRALASIA S GAMBLING INDUSTRIES OVERVIEW 2015/16. Facts, Figures and Statistics
A GUIDE TO AUSTRALASIA S GAMBLING INDUSTRIES Facts, Figures and Statistics OVERVIEW 2015/16 A Guide to Australasia s Gambling Industries Published and Prepared by the (AGC). Level 1/1 Little Collins Street
More informationPressure Reducing Valve
ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 D-32602 Vlotho Fon +49 (0) 57 33-7 99-0 Fax +49 (0) 57 33-7 99-2 00 www.asv-stuebbe.de contact@asv-stuebbe.de Advantages high reproducibility of setting pressure
More information3" UC Ultra-Chuck Durable Lightweight Air Inflated Bladder Chuck Operation/Repair Manual. (76.2 mm) DOUBLE E COMPANY, INC.
3" UC-3000 (76.2 mm) Ultra-Chuck Durable Lightweight Air Inflated Bladder Chuck Operation/Repair Manual DOUBLE E COMPANY, INC. 319 Manley Street, West Bridgewater, MA 02379 U.S.A. Tel: (508) 588-8099 /
More information1 DRIVE INDUSTRIAL IMPACT WRENCH
1 DRIVE INDUSTRIAL IMPACT WRENCH 92622 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2004 by Harbor Freight
More informationTBV-CM. Combined control & balancing valves for small terminal units For modulating control
TBV-CM Combined control & balancing valves for small terminal units For modulating control IMI TA / Control valves / TBV-CM TBV-CM Designed for use in terminal units in heating and cooling systems, the
More informationINSERT PRESSURE FITTINGS PRODUCTS PRICE LIST PRICE GROUP DISCOUNT MULTIPLIER DESCRIPTION 05 PVC INSERT FITTINGS
PRICE GROUP DESCRIPTION 05 PVC INSERT FITTINGS DISCOUNT MULTIPLIER Phone: (315) 451-1100 or (800) 776-2266 Fax: (800) 729-3299 7652 Morgan Road Liverpool, New York 13090 PRODUCTS INSERT PRESSURE FITTINGS
More informationInstallation, operation & maintenance manual - original version
Installation, operation & maintenance manual - original version AVK gate valves for water and wastewater Series 01, 02, 06, 12, 15, 18, 20, 26, 32, 33, 36, 38, 50, 55 and 636 COPYRIGHT AVK GROUP A/S 2018
More informationMODEL MN-PWV PRESSURIZED WATER VESSEL ASSEMBLY OPERATING MANUAL
MODEL MN-PWV PRESSURIZED WATER VESSEL ASSEMBLY OPERATING MANUAL Prepared by CR Manning Edited by SC Woidtke Rev August 22, 2011 PRESSURIZED WATER VESSEL OPERATING MANUAL 1. Background 1.1 The Pressurized
More informationSimple to install connection fails. The Talbot Pushfit fitting is pressure rated PN 16.
Talbot Pushfit Talbot Pushfit - Fittings for Water Pipe Talbot Grippa Universal Service Connector The Talbot Pushfit connection is a tried and tested method of connecting low, The Talbot Grippa is a universal
More informationIAPMO GUIDE CRITERIA FOR BALL VALVES IAPMO IGC PURPOSE
INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS IAPMO GUIDE CRITERIA FOR BALL VALVES IAPMO IGC 157-20067 1 PURPOSE 1.1 The purpose of this standard is to establish an acceptable standard
More informationISO INTERNATIONAL STANDARD. Hydraulic fluid power Hose assemblies Part 1: Dimensions and requirements
INTERNATIONAL STANDARD ISO 17165-1 First edition 2007-10-15 Hydraulic fluid power Hose assemblies Part 1: Dimensions and requirements Transmissions hydrauliques Flexibles de raccordement Partie 1: Dimensions
More informationMAKE BOLLARD IMPACT RESISTANT PROTECT FOUNDATIONS RE-USE BOLLARD
\\ PROTECT FOUNDATIONS In-ground or surface mount Impact Recovery System protects foundations from damage when bollards are impacted, need replacing or upgrading. Surface mount version uses Impact resistant
More informationFEATURES. **Caution: Temperature and pressure affect the strength and chemical resistance of plastic and rubber.
ACCU-PULSE I Pulsation Dampeners Chargeable / Plastic / Dome Top lightweight, compact design 150 psi rating extensive range of materials Technical Data FEATURES remove pulsating flows from positive displacement
More informationDPS (C900) Price List - April 2016
DPS (C900) Price List - April 2016 Ductile Iron Bends (Cat. A) Ductile Iron Tees (Cat. A) Ductile Iron Reducers (Cat. A) Page 3 Page 4-5 Page 5-7 Plugs (Cat. A) Caps (Cat. A) LHD-Series Restraints (Cat.
More informationProtector Aluminium Fencing and Balustrades
Certification Body: ABN: 80 111 217 568 JAS-ANZ Accreditation No. Z4450210AK PO Box 7144, Sippy Downs Qld 4556 +61 (07) 5445 2199 www.certmark.org Certificate Holder: Protector Aluminium ABN: 94 088 343
More informationHigh Pressure Tube Unions
High Pressure Tube Unions DILO. Sustainably tight. Made in Germany I am totally convinced by the high safety level even under extreme pressure. Christian Komm, Siemens AG, Power Generation DILO High pressure
More informationIAPMO IS PUBLIC REVIEW DRAFT Thrust Blocking for Rubber Gasketed and Solvent Cement Joints
IAPMO IS 33-2019 PUBLIC REVIEW DRAFT Thrust Blocking for Rubber Gasketed and Solvent Cement Joints IAPMO Standard IAPMO IS 33 2019 Published: Month Year Published by International Association of Plumbing
More informationNAMED RACEHORSE TRANSFER OF OWNERSHIP INFORMATION AND INSTRUCTIONS
Info Sheet Named Racehorse Transfer of ship When should a Named Racehorse Transfer of ship form be lodged? Any change of ownership of a named racehorse throughout its racing life must be immediately notified
More informationAIR/OVER HYDRAULIC JACK 20 TON
AIR/OVER HYDRAULIC JACK 0 TON 4487 ASSEMBLY AND OPERATING INSTRUCTIONS 349 Mission Oaks Blvd., Camarillo, CA 930 Visit our Web site at http://www.harborfreight.com Copyright 999 by Harbor Freight Tools.
More informationEcoflex pre-insulated pipe energy efficiency made easy
E c o f l e x C o m p l e t e Catalog Supplement June 2010 Hydronic heating, cooling and potable-water distribution Fast, easy installations Energy-efficient Flexible, durable Custom-cut, long lengths
More informationExtract from TELECOMMUNICATIONS PERFORMANCE MONITORING REPORT No. 61 June Quarter 2008
Extract from TELECOMMUNICATIONS PERFORMANCE MONITORING REPORT No. 61 Optus Regulatory Affairs July 2008 SingTel Optus Pty Limited ABN 90 052 833 208 2 Telecommunications Performance Monitoring Report No.
More informationTEST PROTOCOL VERIFICATION OF THE BEHAVIOUR OF A MECHANICAL COMPRESSION COUPLING DURING SETTLEMENT
TEST PROTOCOL VERIFICATION OF THE BEHAVIOUR OF A MECHANICAL COMPRESSION COUPLING DURING SETTLEMENT Nova Siria factory, Roletto, April 6, 2011 Introduction Mechanical steel compression couplings (CC) are
More informationA GUIDE TO AUSTRALASIA S GAMBLING INDUSTRIES CHAPTER NINE 2015/16. Facts, Figures and Statistics. Gambling Participation
A GUIDE TO AUSTRALASIA S GAMBLING INDUSTRIES Facts, Figures and Statistics CHAPTER NINE Gambling Participation 2015/16 A Guide to Australasia s Gambling Industries Published and Prepared by the Australasian
More information6. Features & Benefits Installation Considerations Jointing Instructions Pipe Sizing Calculations & Tables
Contents 2. Overview 3-4. Pipe 5. Fittings 6. Features & Benefits 7-13. Installation Considerations 14-16. Jointing Instructions 17-23. Pipe Sizing Calculations & Tables 24-28. Gas Plus Fitting & Tools
More informationSERIES A24 RAISED RIB
SERIES A24 RAISED RIB Eurobelt Series A24 Raised Rib conveyor belt has been designed mainly to be used with finger plates. It has ribs that, sticking out 6 mm above the module, provide a greater resistance
More informationPRODUCT CATALOGUE 2010
PRODUCT CATALOGUE 2010 Page 2 TABLE OF CONTENTS PRODUCT LINE DESCRIPTION PAGE NO. COMPANY PROFILE Brief Company History, NEXOR, About Us, Mission 3 1 2 3 4 5 NEXOR HDPE Pressure Mains Pipe For Potable
More informationGas plug-in hose, straight-through form. Instructions for Use. suitable for gas socket model G2019T, G2016T. G2023 from 01/1990.
Gas plug-in hose, straight-through form Instructions for Use suitable for gas socket model G2019T, G2016T Model Year built: G2023 from 01/1990 en_int Gas plug-in hose, straight-through form 2 from 12 Table
More informationPressure Relief Valve DHV 718
Pressure Relief Valve DHV 718 Nominal size DN 8 50 Nominal size 3/8 2 Nominal pressure PN 10 bar Features pressure setting range 0.5 to 10 bar diaphragm controlled pressure relief valve simple design,
More informationAbout. providing superior performance and reliability. Bromic regulators are AGA or UL144 approved.
REGULATORS 1 About Bromic Plumbing & Gas provide a wide variety of regulators to suit applications from recreational to professional, in both Natural Gas & LPG (propane). Our range of regulators includes
More informationBelt strength. Available the belt. (kg/m) PP - Polypropylene 2, to [B] PE - Polyethylene 1, to [B]
SERIES E20 FLAT TOP Eurobelt Series E20 Flat Top, due to a closed surface configuration, is the suitable conveyor belt for those applications in which it is not necessary any drainage through the belt
More informationHDPE. Dredging Pipeline
HDPE Dredging Pipeline R Ace Flowtech Co., Ltd Office address: No.2, 2-1601, Rongyuan Road, Huayuan Industrial Park, Tianjin Binhai Hi- Tech Area, Tianjin City, China, 300384 Factory address: No.51 Lutai
More informationBall Float Steam Trap UNA 43 PN 16/CL 125/JIS 10K UNA 46 PN 40/CL 150/CL 300/JIS 10K/JIS 20K DN 80, 100, 150, 3", 4", 6"
Data Sheet 819584-00 Issue Date: 01/17 Ball Float Steam Trap UNA 43 PN 16/C 125/JIS 10K UNA 46 PN 40/C 150/C 300/JIS 10K/JIS 20K DN 80, 100, 150, 3", 4", 6" UNA 43 hl, UNA 46 hl UNA 43 v, UNA 46 v with
More informationHORSE REGISTRATION. Types of Ownership
This form is used to name and register the ownership of a horse. The Foal Identification Card or Document of Description must be lodged with the application. A horse can be registered in the names of up
More informationPVC Electrical Fittings & Accessories Price List
PVC Electrical Fittings & Accessories Price List Effective August 26, 2002 Electrical Products PVC Electrical Fittings & Accessories Price List PVC Electrical Standards 2 Schedule 40 Fittings: Couplings,
More informationHORSE REGISTRATION. Types of Ownership
This form is used to name and register the ownership of a horse. The Foal Identification Card or Document of Description must be lodged with the application. A horse can be registered in the names of up
More informationDVS Technical Codes an Bulletins
DVS Technical Codes an Bulletins DVS 1904-1 (2010-02) Adhesive bonding of plastics in domestic installation Requirements on plants and personnel... 1 DVS 1904-2 (2010-02) Adhesive bonding of plastics in
More informationHORSE REGISTRATION. Types of Ownership
This form is used to name and register the ownership of a horse. The Foal Identification Card or Document of Description must be lodged with the application. A horse can be registered in the names of up
More informationPVC FASTTAP SADDLES for IPS Mains. Main Size OUTLET 1 FPT 3/4 CTS (7/8 OD) COMPRESSION 1 CTS (1 1/8 OD) COMPRESSION 3/4 IPS COMPRESSION
PVC FASTTAP SADDLES PVC FASTTAP SADDLES for IPS Mains THE ULTIMATE CONNECTION OUTLET 3/4 IPS FEMALE SLIP OR 1 IPS MALE SLIP SOLVENT WELD 1 IPS FEMALE SLIP SOLVENT WELD 3/4 MPT 1 MPT 3/4 FPT MAIN 13/16
More informationModel MTB-ASME Horizontal Bladder Tanks
DATA SHEET Model MTB-ASME Horizontal Bladder Tanks Features n UL Listed and FM Approved for use with various proportioners and foam concentrates n 175 psi (12.1 bar) maximum allowable working pressure
More informationHUPF Series DESCRIPTION APPLICATION INSTRUCTION SHEET GAS PRESSURE REGULATOR WITH INCORPORATED FILTER EN1C-0003NL05 R1205.
HUPF Series GAS PRESSURE REGULATOR WITH INCORPORATED FILTER INSTRUCTION SHEET DESCRIPTION Spring-loaded regulator with inlet pressure compensation and zero shut-off. The outlet pressure is kept constant
More informationMUELLER. Mega-Lite Drilling Machine. Reliable Connections. table of contents PAGE. Equipment 2. Operating Instructions 3-4. Parts Information 5
operating Instructions manual MUELLER Mega-Lite Drilling Machine table of contents PAGE Equipment 2 Operating Instructions 3-4 Parts Information 5 Travel Charts 6-11! WARNING: 1. Read and follow instructions
More informationpvc well casing & drop pipe
C e r t a i nte e d pvc well casing & drop pipe P V C We l l P r o d u c t s Sure Fit PVC well casing and drop pipe have gained broad acceptance since their introduction almost 40 years ago. Today, due
More informationINSTALLATION, OPERATION AND MAINTENANCE GUIDE
INSTALLATION, OPERATION AND Placement in Pipeline System When installing Process Development & Control s ElastoTITE Elastomer-Hinged Check Valves in a pipeline, a minimum of five pipe diameters should
More informationIndustry Guidelines POLYETHYLENE (PE) PIPES AND FITTINGS FOR COMPRESSED AIR ISSUE 6.8
Industry Guidelines POLYETHYLENE (PE) PIPES AND FITTINGS FOR COMPRESSED AIR ISSUE 6.8 Ref: POP002 19 APR 2009 Disclaimer In formulating this guideline PIPA has relied upon the advice of its members and,
More informationTECHNICAL DATASHEET HC71 SERIES SAFETY HELMET DESCRIPTION APPLICATIONS
HC71 SERIES SAFETY HELMET DESCRIPTION The Australian made Protector HC71 series ABS safety helmet (Type 1) with comfortable 6 point terylene head harness is designed to deflect falling objects and provide
More informationF-08 HIGH-PRESSURE HOSE USED IN CO2 SYSTEM
Guideline No.: F-08(201510) F-08 HIGH-PRESSURE HOSE USED IN CO2 SYSTEM Issued date: October 20,2015 China Classification Society Foreword: This Guide is a part of CCS Rules, which contains technical requirements,
More informationFlue Gas Venting Systems
Flue Gas Venting Systems 1 F L U E G A S V E N T I N G S Y S T E M S SYSTEM 636 Fully Certified to ULC S636 System 636 is rated for flue gas temperatures up to and including 65ºC System 636 is rated for
More informationPerspectives on the long-term outlook for iron ore
Perspectives on the long-term outlook for iron ore John Barkas john.barkas@metalytics.com.au Iron Ore 2015 Perth WA, 13 July 2015 Disclaimer Metalytics is a consultancy based in Sydney, Australia that
More informationDT400/436 Tee Connector Installation Instructions
Connectors Lorem ipsum and dolor Splices sit Amat Effective September 2014 Supersedes IS550-30-1 March 2011 MN650001EN DT400/436 Tee Connector Installation Instructions DISCLAIMER OF WARRANTIES AND LIMITATION
More informationGases for the healthcare sector
Gases for the healthcare sector WHAT YOU CAN EXPECT FROM US Focus on understanding and meeting your requirements We aim to provide straightforward, cost effective and flexible services and products that
More informationEVALUATION SUBJECT: PUSH FIT FITTINGS DIVISION: PLUMBING SECTION: DOMESTIC WATER PIPING. Report Holder:
ICC-ES Report PMG-1149 Reissued 08/2017 This report is subject to renewal 08/2018 EVALUATION SUBJECT: PUSH FIT FITTINGS DIVISION: 22 00 00 PLUMBING SECTION: 22 11 16 DOMESTIC WATER PIPING Report Holder:
More informationAn example of systems that are inherently excellent applications for the cupronickel product are:
W&O Supply, founded in 1975, is the leading provider of marine piping solutions in the United States. W&O Supply, through its branch locations, distributes and provides services for valves, pipe, fittings,
More information