DAV CENTENARY COLLEGE, FARIDABAD
|
|
|
- Amberlynn Patrick
- 5 years ago
- Views:
Transcription
1 DAV CENTENARY COLLEGE, FARIDABAD SUMMARY OF LESSION PLAN (JAN-18 TO APRIL-18) Name of Asst/Associate Professor : RASHMI VERMA Class & Section : BCA-2ND Semester Subject : Logical Organization of computer-ii (BCA-107) Academic Session : January April 2018 Date Topics to be Covered 1st Jan 2018 Sequential Logic :- Characteristics 2nd Jan 2018 Flip-Flops 3rd Jan 2018 Clocked RS, D Flip-Flops Week 1 4th Jan 2018 JK Flip-Flop, T Flip-Flop 5th Jan 2018 Guru Govind Singh Birthday 6th Jan 2018 Tutorial class on Flip-Flops 7th Jan th Jan 2018 Master-Slave Flip-Flops 9th Jan 2018 State table, state diagram and state equations 10th Jan 2018 Flip-flop excitation tables Week 2 11th Jan 2018 Class test Unit th Jan 2018 UNIT-II Sequential Circuits: Designing registers 13th Jan 2018 Serial Input Serial Output (SISO), Serial Input Parallel Output (SIPO) 14th Jan th Jan 2018 Parallel Input Serial Output (PISO), Parallel Input Parallel Output (PIPO) 16th Jan 2018 Bidirectional Shift Register 17th Jan 2018 Universal Shift Register Week 3 18th Jan 2018 Designing counters- Diff between synchronous and asynchronous counter 19th Jan bit Ripple Counter 20th Jan 2018 Asynchronous up-down Counter 21st Jan nd Jan 2018 Basant Panchmi 23rd Jan 2018 MOD -N Asynchronous counter 24th Jan 2018 Sir Chhotu Ram Jayanti Week 4 25th Jan 2018 Synchronous up Counter 26th Jan 2018 Republic Day 27th Jan 2018 Synchronous down Counter 28th Jan th Jan 2018 Synchronous up-down counter 30th Jan 2018 Synchronous MOD-N counter 31st Jan 2018 Guru Ravidass Birthday Week 5 1st Feb 2018 Doubt class on Register 2nd feb 2018 Presentation by students on register 3rd Feb 2018 Presentation by students on register 4th Feb th Feb 2018 Design of synschronous counter using T-Flip Flop 6th Feb 2018 Design of synschronous counter using JK-Flip Flop 7th Feb 2018 Tutorial class on Asynchronous counter Week 6 8th Feb 2018 Tutorial class on Synchronous counter
2 9th Feb th Feb th Feb th Feb th Feb th Feb 2018 Week 7 15th Feb th Feb th Feb th Feb th Feb th Feb st Feb 2018 Week 8 22nd Feb rd Feb th Feb th Feb th Feb th Feb th Feb 2018 Week 9 1st Mar nd Mar rd Mar th Mar th Mar th Mar th Mar 2018 Week 10 8th Mar th Mar th Mar th Mar th Mar th Mar th Mar 2018 Week 11 15th Mar th Mar th Mar th Mar th Mar th Mar st Mar 2018 Week 12 22nd Mar rd Mar th Mar th Mar th Mar 2018 Class test Unit - II Maharishi Dayanand Saraswati Jayanti UNIT-IV - Instruction Design & I/O Organization Maha Shivratri Instruction Format CPU interfacing Bus CPU Registers Timing and cycle constraints Addressing Modes Machine instruction Instruction set selection Instruction cycle I/O Interface Interrupt structure Program-controlled Interrupt-controlled DMA transfer I/O Channels IOP Test of unit-4 UNIT-III-Memory & I/O Devices Memory Parameters Semiconductor RAM Static RAM and types Shaheedi diwas of Bhagat Singh Working of static RAM (Ram navami) Dynamic RAM and Types
3 27th Mar 2018 Working of Dynamic RAM 28th Mar 2018 ROM and types of ROM Week 13 29th Mar 2018 Mahavir Jayanti 30th Mar 2018 Memory Hierarchy 31st Mar 2018 Magnetic Storage Devices 1st Apr 2018 Types of Magnetic storage Devices 2nd Apr 2018 Optical Storage Devices 3rd Apr 2018 Tyes of Optical Strorage devices 4th Apr 2018 Difference between magnetic storage and optical storage Week 14 5th Apr 2018 Flash memory 6th Apr 2018 Input Devices 7th Apr 2018 Output Devices 8th Apr th Apr 2018 Input Controller 10th Apr 2018 Output Controller 11th Apr 2018 Presentation by students on unit-3 Week 15 12th Apr 2018 Presentation by students on unit-3 13th Apr 2018 Vaisakhi 14th Apr 2018 Dr Ambedkar Jayanti 15th Apr th Apr 2018 Discussion on important topics 17th Apr 2018 Tutorial class 18th Apr 2018 Parashurama Jayanti Week 16 19th Apr 2018 Revision of Unit-I 20th Apr 2018 Revision of Unit-I 21st Apr 2018 Revision of Unit-II 22nd Apr rd Apr 2018 Revision of Unit-II 24th Apr 2018 Revision of Unit-IV 25th Apr 2018 Revision of Unit-IV Week 17 26th Apr 2018 Revision of Unit-III 27th Apr 2018 Previous year question paper discussion 28th Apr 2018 Previous year question paper discussion 29th Apr 2018 Week 18 30th Apr 2018 Buddha Purnima SUMMARY OF LESSION PLAN (JAN-18 TO APRIL-18) Class & Section : BCA-IInd Semester Subject : Structured System Analysis and Design (BCA-109) Session - January April 2018 Date Topic to be covered 1st Jan 2018 Intrduction to System 2nd Jan 2018 Characteristics of a System 3rd Jan 2018 Elements of a system Week 1 4th Jan 2018 Elements of a system
4 Week 2 Week 3 Week 4 Week 5 Week 6 Week 7 5th Jan 2018 Guru Govind Singh Birthday 6th Jan 2018 Types of System 7th Jan th Jan 2018 Types of System Continued 9th Jan 2018 SDLC and its Phases 10th Jan 2018 Preliminary survey & feasibility study Phases 11th Jan 2018 system Analysis and Design Phases 12th Jan 2018 System Testing, Implimentation and maintenance 13th Jan 2018 Presentation on SDLC 14th Jan th Jan 2018 Role of System Analysis 16th Jan 2018 Analyst and User Interface 17th Jan 2018 System planning & Initial Investigation 18th Jan 2018 Planning in System Analysis 19th Jan 2018 Sources of Project requests 20th Jan 2018 Fact Finding Techniques 21st Jan nd Jan 2018 Basant Panchmi 23rd Jan 2018 Information Gathering Tools 24th Jan 2018 Sir Chhotu Ram Jayanti 25th Jan 2018 Determination of Feasibility 26th Jan 2018 Republic Day 27th Jan 2018 Revision of SDLC Fact Finding techniques 28th Jan th Jan 2018 Test of Unit -I 30th Jan 2018 Tools of Structured Analysis 31st Jan 2018 Guru Ravidass Birthday 1st Feb 2018 DFD-Logical & Physical 2nd feb 2018 Flow Charts and Gantt charts 3rd Feb 2018 Decision Tree/ Decision Table 4th Feb th Feb 2018 Structured English-Pros and Cons 6th Feb 2018 Feasibility Analysis & Report 7th Feb 2018 Cost Benefit Analysis 8th Feb 2018 Presentation on Structured Analysis Tools 9th Feb 2018 Methods of Determining Cost / benefit 10th Feb 2018 MaharshiDayanand Saraswati Jayanti 11th Feb th Feb 2018 Assignments Question and Discussion 13th Feb 2018 Maha Shivratri 14th Feb 2018 Interpret Result of Analysis 15th Feb 2018 Interpret Result of Analysis and Final Action 16th Feb 2018 Revision of Unit -II 17th Feb 2018 Revision & doubts of Unit I & II 18th Feb th Feb 2018
5 20th Feb st Feb 2018 Week 8 22nd Feb rd Feb th Feb th Feb th Feb th Feb th Feb 2018 Week 9 1st Mar nd Mar rd Mar th Mar th Mar th Mar th Mar 2018 Week 10 8th Mar th Mar th Mar th Mar th Mar th Mar th Mar 2018 Week 11 15th Mar th Mar th Mar th Mar th Mar th Mar st Mar 2018 Week 12 22nd Mar rd Mar th Mar th Mar th Mar th Mar th Mar 2018 Week 13 29th Mar th Mar st Mar st Apr nd Apr rd Apr th Apr 2018 Week 14 5th Apr th Apr 2018 Objectives of System Design Logical and Physical Design Examples Design Methodologies Structured Design Form Driven Methodologies IPO Charts Structured Walkthrough Presentation on system design and charts Objectives of Input design Objectives of output design Form Design Classification of Forms Classification of Forms Types of Forms Requirements of Form Design Form Layout Consideration Shaheedi diwas of Bhagat Singh Form Control (Ram navami) Assignments Questions and Discussion Doubts of unit III Test of Unit -III Mahavir Jayanti Introduction to System Testing Testing and its objectives (Bank Holiday) Test plan Testing Techniques Types of System Test Types of System Test Presentation on system testing
6 7th Apr 2018 Examples on system testing 8th Apr th Apr 2018 Quality Assurance and its types 10th Apr 2018 Goals of quality assurancein System Life cycle 11th Apr 2018 System implimentation Week 15 12th Apr 2018 Types of implementation 13th Apr 2018 Vaisakhi 14th Apr 2018 Dr Ambedkar Jayanti 15th Apr th Apr 2018 System evaluation and its types 17th Apr 2018 Presentation on system implementation and evaluation 18th Apr 2018 Parashurama Jayanti Week 16 19th Apr 2018 System maintenace and its types 20th Apr 2018 Types of System maintenace 21st Apr 2018 Types of System maintenace 22nd Apr rd Apr 2018 System documentation 24th Apr 2018 Forms of documentation 25th Apr 2018 Test on unit -IV Week 17 26th Apr 2018 Previous year question paper discussion 27th Apr 2018 Previous year question paper discussion 28th Apr 2018 Revision of full syllabus 29th Apr 2018 Week 18 30th Apr 2018 Buddha Purnima Signature of Teacher Signature of Head of Deptt.
DAV CENTENARY COLLEGE FARIDABAD
DAV CENTENARY COLLEGE FARIDABAD SUMMARY OF LESSION PLAN (JAN-18 TO APRIL-18) Name of Asst/Associate Professor : STUTI TANDON Class & Section: BCA - 4th Semester Subject: WEB DESIGNING (BCA-206) Session-
DAV CENTENARY COLLEGE FARIDABAD
DAV CENTENARY COLLEGE FARIDABAD LESSON PLAN Name of Asst/Associate Professor : ANJALI MANCHANDA Class & Section: BCA -2nd semester Subject: 'C' Programming (BCA-106) Session - January 2018 - April 2018
DAV CENTENARY COLLEGE FARIDABAD
DAV CENTENARY COLLEGE FARIDABAD SUMMARY OF LESSION PLAN (JAN-18 TO APRIL-18) Name of Asst/Associate Professor : UTTAMA PANDEY Class & Section: BCA -2nd semester Subject: 'C' Programming (BCA-106) Session
DAV CENTENARY COLLEGE FARIDABAD
DAV CENTENARY COLLEGE FARIDABAD LESSON PLAN Name of Asst/Associate Professor : Sonia Bhatia Class & Section B Com( hons) II Sem (A + B) Subject Business Organisation & Management Session Jan April 2018
DAV CENTENARY COLLEGE FARIDABAD
DAV CENTENARY COLLEGE FARIDABAD Summary of Lesson Plans of College Faculty Name of Asst/Associate Professor : Sh. Mukesh Bansal Class & Section : B.Com 6th Sem (A,B,C) Subject : Cost Accounting Academic
DAV CENTENARY COLLEGE FARIDABAD
DAV CENTENARY COLLEGE FARIDABAD Summary of Lesson Plans of College Faculty Name of Asst/Associate Professor : Dr.Reena Grewal Class & Section : M.A IVth semester Subject : Indian Writings in English II
DAV CENTENARY COLLEGE FARIDABAD
DAV CENTENARY COLLEGE FARIDABAD LESSON PLAN Name of Asst/Associate Professor : Ms Rajni Tuteja Class & Section : M.COM IV Semester Subject : Business Research Methods Session Jan April 2018 Date Topic
DAV CENTENARY COLLEGE FARIDABAD
14th Jan 2018 5th Feb 2018 DAV CENTENARY COLLEGE FARIDABAD Summary of Lesson Plans of College Faculty Name of Asst/Associate Professor : DR ARCHANA SINGHAL Class & Section: B.Com (PASS) 2nd Sem Section
DAV CENTENARY COLLEGE FARIDABAD
Name of Asst/Associate Professor : DR ANJU GUPTA Class & Section: B.Com (PASS) 2nd Sem Section A Subject: : financial accounting Academic Session Jan April 2018 Week 1 Week 2 Week 3 Week 4 Week 5 Date
DAV CENTENARY COLLEGE FARIDABAD
DAV CENTENARY COLLEGE FARIDABAD LESSON PLAN Name of Asst/Associate Professor : Ms. Smriti Sharma Class & Section: BBA GEN 2ND SEMESTER (A) Subject : ORGANISATION BEHAVIOUR Session Jan April 2018 Date Topic
Synchronous Sequential Logic. Topics. Sequential Circuits. Chapter 5 Steve Oldridge Dr. Sidney Fels. Sequential Circuits
Synchronous Sequential Logic Chapter 5 Steve Oldridge Dr. Sidney Fels Sequential Circuits Topics What happens when we add memory? Latches Flip-Flops Clocks State Tables Reduction of States 10/6/2010 c
Lesson Plan. Lesson Plan : 17 Weeks (January-April 2018) Class M.Com 2 nd Sem International Business. 4 th Sem Economics
Lesson Plan Name of the Assistant Professor : Pramila Lesson Plan : 17 Weeks (January-April 2018) Week Date Class M.Com 2 nd Sem International Business Class B.M.C 4 th Sem Economics Class B.A. 2 nd Sem
ACADEMIC CALENDER-2017
Month Day of the Date Number of Working days ACADEMIC CALENDER-2017 Weekdays Activities Number of Days classes are held Number of Weeks classes are held (at 5 days per week) January 1 Sunday New Year Day
GOVERNMENT OF HIMACHAL PRADESH GENERAL ADMINISTRATION DEPARTMENT SECTION-A No. GAD-A(F)9-5/2017 Dated Shimla-2 the 07 th September, 2017.
GOVERNMENT OF HIMACHAL PRADESH GENERAL ADMINISTRATION DEPARTMENT SECTION-A GAD-A(F)9-5/2017 Dated Shimla-2 the 07 th September, 2017. NOTIFICATION The Governor, Himachal Pradesh is pleased to order that
GOBARDANGA HINDU COLLEGE NAAC Accredited (2 nd Cycle) A Grade College Affiliated to the West Bengal State University. Academic Calendar
GOBARDANGA HINDU COLLEGE NAAC Accredited (2 nd Cycle) A Grade College Affiliated to the West Bengal State University Academic Calendar 2018-2019 P.O. KHANTURA, 24 PARGANAS (North), West Bengal, Pin 743273
82C288 BUS CONTROLLER FOR PROCESSORS (82C C C288-8)
BUS CONTROLLER FOR 80286 PROCESSORS (82C288-12 82C288-10 82C288-8) Y Provides Commands and Controls for Local and System Bus Y Wide Flexibility in System Configurations Y High Speed CHMOS III Technology
HAND BOOK OF GUIDELINES FOR THE SESSION
HAND BOOK OF GUIDELINES FOR THE SESSION 2018-19 FOR LA PETITE (TODDLERS, P.G.) Page 1 April 2018 Intelligence without ambition is a bird without wings. 2nd April-6 th April 2018 (Monday-Friday) 13 th April
KHATAULI MUZAFFARNAGAR- U.P. Tel: ,
KHATAULI - 251201 MUZAFFARNAGAR- U.P. Tel: 01396-275753, 9458537668 CALENDAR 2018-2019 APRIL 2018 1 Sunday Easter Sunday, Holiday 2 Monday Easter Monday, Staff Meeting 3 Tuesday New Academic Year starts:
David C. Yen Miami University
The Information System Consultant's Handbook Systems Analysis and Design Miami UniversityVy and David C. Yen Miami University CRC Press Boca Raton London New York Washington, D.C. Contents Part I: Principles
8. Union Territory Administrations shall decide the list of holidays terms of Instructions issued in this regard by the Ministry of Home Affairs.
F.No.12/7/2015-JCA-2 Government of India Ministry of Personnel, Public Grievances and Pensions (Department of Personnel and Training) North Block, New Delhi Dated the 11th June, 2015 Subject: Holidays
CPE/EE 427, CPE 527 VLSI Design I L21: Sequential Circuits. Review: The Regenerative Property
CPE/EE 427, CPE 527 VLSI esign I L21: Sequential Circuits epartment of Electrical and Computer Engineering University of Alabama in Huntsville Aleksandar Milenkovic ( www.ece.uah.edu/~milenka ) www.ece.uah.edu/~milenka/cpe527-5f
VLSI Design I; A. Milenkovic 1
Review: The Regenerative Property V i V o V i V o CPE/EE 47, CPE 57 VLSI esign I : Sequential Circuits epartment of Electrical and Computer Engineering University of labama in Huntsville leksandar Milenkovic
MICROPROCESSOR ARCHITECTURE
MICROPROCESSOR ARCHITECTURE UOP S.E.COMP (SEM-I) PIPELINED ARCHITECTURE Prof.P.C.Patil Department of Computer Engg Matoshri College of Engg.Nasik pcpatil18@gmail.com. Bus Cycles of 80386 2 Bus Cycles of
2. In addition to the holidays mentioned in Annexure- L all Government
GOVERNMENT OF HMACHAL PRADESH GENERAL ADMNSTRATON DEPARTMENT S.CTlON-A GAD-A(F)LJ-4/20 13 Dated Shimla-2 the ~3~eptember.2013. NOTfiCATON The Governor. Himachal Pradesh is pleased to order that the holidays
SESSION April
SESSION - 2017-18 April Date Days 1 Saturday New Session commences,annual fee deposit 2 Sunday Annual fee deposit 3 Monday Annual fee deposit 4 Tuesday Annual fee deposit 5 Wednesday Holiday - Ram Navami
ARMY PUBLIC SCHOOL JAMMU CANTT SUMMARY OF ANNUAL CALENDER ( )
ARMY PUBLIC SCHOOL JAMMU CANTT SUMMARY OF ANNUAL CALENDER ( 2018 2019 ) A. EXAMINATION SCHEDULE : CLASS I TO XI a) Unit -I : 14 May to 21 May 2018 b) UNIT -II : 30 Aug to 10 Sept 2018 c) Half Yearly Exam
CARIBBEAN EXAMINATIONS COUNCIL
CARIBBEAN EXAMINATIONS COUNCIL REPORT ON CANDIDATES WORK IN THE ADVANCED PROFICIENCY EXAMINATION MAY/JUNE 2011 ELECTRICAL AND ELECTRONIC TECHNOLOGY Copyright 2010 Caribbean Examinations Council St Michael,
F.No.12/5/2009-JCA-2 Government of India Ministry of Personnel Public Grievances and Pensions (Department of Personnel and Training)
F.No.12/5/2009-JCA-2 Government of India Ministry of Personnel Public Grievances and Pensions (Department of Personnel and Training) Dated : June 9, 2009 Subject: Holidays to be observed in Central Government
VLSI Design 14. Memories
Last module: Synthesis and Verilog This module Memory arrays SRMs Serial Memories Dynamic memories Memory rrays Memory rrays Random ccess Memory Serial ccess Memory Content ddressable Memory (CM) Read/Write
Government of India Ministry of Personnel Public Grievances and Pensions Department of Personnel and Training North Block, New Delhi No.
Government of India Ministry of Personnel Public Grievances and Pensions Department of Personnel and Training North Block, New Delhi No.12/1/2007-JCA IMMEDIATE Dated the 30th July, 2007 Subject: Holidays
HW #5: Digital Logic and Flip Flops
HW #5: Digital Logic and Flip Flops This homework will walk through a specific digital design problem in all its glory that you will then implement in this weeks lab. 1 Write the Truth Table (10 pts) Consider
Subject: Holidays to be observed in Central Government Offices during the year reg.
we. F.No.12/3/2017-JCA-2 Government of India Ministry of Personnel, Public Grievances and Pensions (Department of Personnel and Training) Establishment (JCA-2) Section North Block, New Delhi Dated the
Subject: Holidays to be observed in Central Government Offices during the year 2013.
MOST IMMEDIATE F.No.12/4/2012-JCA-2 Government of India Ministry of Personnel, Public Grievances and Pensions (Department of Personnel and Training) North Block, New Delhi Dated the 5th June, 2012 Subject:
Holidays to be observed in Central Government year 2010.
F.No.12j 5j2009-JCA-2 Government of India Ministry of Personnel, Public Grievances and Pensions (Department of Personnel and Training) North Block, New Delhi Dated the 9 th June, 2009 Holidays to be observed
PC-based systems ELOP II-NT
ELOP II-NT... the safe decision. 1 (mm 9910) Continuity in the work process... Double work processes resulting from a lack of interfaces between project stages is an unnecessary waste of time and money
Subject: Holidays to be observed in Central Government Offices during the2019- reg.
F. No.12/2/2018-JCA-2 Government of India Ministry of Personnel, Public Grievances and Pensions (Department of Personnel and Training) Establishment (JCA-2) Section North Block, New Delhi Dated the 11th
CALENDAR Monday 09 April, March, 2019
CALENDAR Monday 09 April, 2018 31 March, 2019 APRIL Sunday, 01 Holiday: EASTER Wednesday, 04 Thursday, 05 Saturday, 07 Sunday, 08 Monday, 09 Wednesday, 11 Saturday, 14 Wednesday, 18 Thursday, 19 Friday,
AMRISHBHAI R.PATEL SCHOOL SHIRPUR. PLANNER PRIMARY & SECONDARY SECTION CLASS 1 TO 10
AMRISHBHAI R.PATEL SCHOOL SHIRPUR. PLANNER 2018-19 PRIMARY & SECONDARY SECTION CLASS 1 TO 10 COLOUR CODES USED IN THE PLANNER TESTS AND EXAMS WEEKLY CYCLE TESTS SUNDAYS AND HOLIDAYS NON-INSTRUCTIONAL WORKING
Profile-driven Selective Code Compression
Profile-driven Selective Code Compression Yuan Xie and Wayne Wolf Electrical Engineering Department Princeton University Princeton, NJ 08540, USA yuanxie,wolf@ee.princeton.edu Haris Lekatsas NEC USA 4
Failure modes and models
Part 5: Failure modes and models Course: Dependable Computer Systems 2007, Stefan Poledna, All rights reserved part 5, page 1 Failure modes The way a system can fail is called its failure mode. Failure
Distributed Control Systems
Unit 41: Unit code Distributed Control Systems M/615/1509 Unit level 5 Credit value 15 Introduction With increased complexity and greater emphasis on cost control and environmental issues, the efficient
THE CANDU 9 DISTRffiUTED CONTROL SYSTEM DESIGN PROCESS
THE CANDU 9 DISTRffiUTED CONTROL SYSTEM DESIGN PROCESS J.E. HARBER, M.K. KATTAN Atomic Energy of Canada Limited 2251 Speakman Drive, Mississauga, Ont., L5K 1B2 CA9900006 and M.J. MACBETH Institute for
Science&Motion. SAM BalanceLab. Sports. control the invisible. Most advanced pressure plate for coaching
SAM BalanceLab Science&Motion Sports control the invisible Most advanced pressure plate for coaching Balance - the invisible key to success Stop the guesswork and start to rely on facts Science and Motion
VLSI Design 12. Design Styles
1 9 8 5 1 9 8 7 1 9 9 1 1 9 9 3 1 9 9 9 2 0 0 1 2 0 0 5 2 0 0 7 2 0 0 9 Pr odu ctiv it y (T r an s./ St a f -M o nt h ) VLSI Design Last module: Floorplanning Sequential circuit design Clock skew This
CT PET-2018 Part - B Phd COMPUTER APPLICATION Sample Question Paper
CT PET-2018 Part - B Phd COMPUTER APPLICATION Sample Question Paper Note: All Questions are compulsory. Each question carry one mark. 1. Error detection at the data link layer is achieved by? [A] Bit stuffing
GOVERNMENT OF NATIONAL CAPITAL TERRITORY OF DELHI DIRECTORATE OF EDUCATION: SCHOOL BRANCH OLD SECRETARIAT DELHI CIRCULAR
GOVERNMENT OF NATIONAL CAPITAL TERRITORY OF DELHI DIRECTORATE OF EDUCATION: SCHOOL BRANCH OLD SECRETARIAT DELHI-110054 No. DE.23(3)/Sch.Br./2019-20/tpi Dated :091(41)_00 CIRCULAR Sub: Mandatory 220 Working
Data Sheet T 8389 EN. Series 3730 and 3731 Types , , , and. EXPERTplus Valve Diagnostic
Data Sheet T 8389 EN Series 3730 and 3731 Types 3730-2, 3730-3, 3730-4, 3730-5 and Type 3731-3 Electropneumatic Positioners EXPERTplus Valve Diagnostic Application Positioner firmware to detect potential
Certification Exhibit FCC ID: R7PIWRS4. FCC Rule Part: ACS Report Number: W03.11.A
Certification Exhibit FCC ID: R7PIWRS4 FCC Rule Part: 15.247 ACS Report Number: 09-0412.W03.11.A Manufacturer: Cellnet Technology Inc. Model: Gridstream DCIWR Manual 5015 B.U. Bowman Drive Buford, GA 30518
Academic Calendar Wish you a Happy New Year. North Eastern Regional Institute of Science & Technology
North Eastern Regional Institute of Science & Technology [Deemed- to- be University under Section-3 of the UGC Act, 1956] (Under Ministry of Human Resource Development, Govt of India) Nirjuli 791109::Arunachal
Fast Software-managed Code Decompression
Fast Software-managed Code Decompression Charles Lefurgy and Trevor Mudge Advanced Computer Architecture Laboratory Electrical Engineering and Computer Science Dept. The University of Michigan, Ann Arbor
VLSI Design I; A. Milenkovic 1
CPE/EE 427, CPE 527 VLSI esign I L2: ynamic Sequential Circuits epartment of Electrical and Computer Engineering University of Alabama in Huntsville Aleksandar Milenkovic ( www. ece.uah.edu/~milenka )
Introducing STAMP in Road Tunnel Safety
Introducing STAMP in Road Tunnel Safety Kostis Kazaras National Technical University of Athens, Mechanical Engineering School, Greece Contact details: kkazaras@gmail.com kkaz@central.ntua.gr Problem illustration
Exercise 1: Control Functions
Exercise 1: Control Functions EXERCISE OBJECTIVE When you have completed this exercise, you will be able to control the function of an asynchronous ripple counter. You will verify your results by operating
TAKING IT TO THE EXTREME The WAGO-I/O-SYSTEM for extreme Applications
TAKING IT TO THE EXTREME The WAGO-I/O-SYSTEM for extreme Applications extreme Temperature...from -40 C to +70 C (-40 F to +158 F) extreme Vibration...up to 5G Acceleration extreme Isolation...up to 5kV
AMS 6915 Board mount pressure sensor with digital output (I²C)
Board mount pressure sensor with digital output (I²C) FEATURES Calibrated and temperature compensated pressure sensor with digital output (I²C) Differential, relative (gage), bidirectional differential,
Internationa l Women s Day. Holi. World Day of Water. Theme-
CCA CALENDAR FOR APRIL - 2017 Date Day Pre-primary Primary Senior's Sports Activity Holiday 01.04.2017 Saturday Memory Test 02.04.2017 03.04.2017 Monday 04.04.2017 Tuesday Maha Astmi 05.04.2017 Wednesday
A4 Operation Manual. Fig.1-1 Controller Socket Diagram
A4 Operation Manual Safety Instruction Please read this manual carefully, also with related manual for the machinery before use the controller. For installing and operating the controller properly and
Touch Screen Guide. OG-1500 and OG Part # T011
Touch Screen Guide OG-1500 and OG-2000 Part # 9000000.T011 Effective 11/2010 External View Internal View 1. Transducer Banks 2. Oxygen Sensor 3. PLC These are the two manifolds with three (3) transducers
Analysis of 2015 Trail Usage Patterns along the Great Allegheny Passage
Analysis of 2015 Trail Usage Patterns along the Great Allegheny Passage Prepared for the Allegheny Trail Alliance, August 2016 By Dr. Andrew R. Herr Associate Professor of Economics Saint Vincent College
1 STARTUP Overview Buttons Basics of Control Resetting Faults and Alarms OPERATION...
Operation & Service Manual 940126-0002 pco 3 Programmable Logic Controller Contents 1 STARTUP...1 1.1 Overview... 1 1.1.1 Buttons... 1 1.1.2 Basics of Control... 1 1.2 Resetting Faults and Alarms... 2
A4s Operation Manual
A4s Operation Manual Safety Instruction Please read this manual carefully, also with related manual for the machinery before use the controller. For installing and operating the controller properly and
Electronic Automatic Transmission for Bicycle
Electronic Automatic Transmission for Bicycle Team 4 Tianqi Liu, Ruijie Qi, and Xingkai Zhou ECE 445 Project Proposal Spring 2018 TA: Hershel Rege 1 Introduction 1.1 Objective Nowadays, an increasing number
Transportation Planning Division
Transportation Planning Division Presentation Outline Study Tasks Recap of Previous Meetings Data Collected Focus Areas within Study Limits Design Principles Tool Box Recommended Concepts Schedule Moving
Industrial Compressor Controls Standard Custom
Technical Seminars 2012 Industrial Compressor Controls Standard Custom CONTROLLING the power of ENERGY 1 TM 2 Woodward Compressor Controls Small Steam Turbine Driven Compressors (ITCC) 3 Simple Compressor
Domino DUEMMEGI. Domino. Communication Interface DFTS User s Manual. Release September 2007
Domino Domino Communication Interface DFTS User s Manual Release 2.3 - September 2007 srl Via Longhena 4-20139 MILANO Tel. 02/57300377 - FAX 02/55213686 Domino - DFTS: User s Manual R.2.3 Index 1- INTRODUCTION...3
Road Traffic Estimates
Road Traffic Estimates Methodology Note An annual series of road traffic estimates are published by the Department for Transport, approximately 6 months after the end of the reference year. Data Collection
July 2015 Sept Cork City Pedestrian Counter Report
July 2015 Sept 2015 Cork City Pedestrian Counter Report Disclaimer Cork City Council has produced this report based on information extracted from our Pedestrian Counter Monitoring System. Although care
NY 5 BRT Conceptual Design Study: Study Advisory Committee Meeting 1. with Creighton Manning Engineering, LLP Logitrans Herb Levinson
NY 5 BRT Conceptual Design Study: Study Advisory Committee Meeting 1 with Creighton Manning Engineering, LLP Logitrans Herb Levinson September 22, 2003 Overview Introduction to the consultant team Goals
Potential usefulness of Continuous flow intersections in greater Philadelphia
Potential usefulness of Continuous flow intersections in greater Philadelphia Final Proposal By Russell Wight Submitted 12/8/06 Advisor: Professor Faruq M.A. Siddiqui Abstract For my Engineering 90 project
Aims and Objectives The main aims of the Walking Initiative pilot scheme were as follows:
Title The Golden Flip Flop walking initiative Short description The Golden Flip Flop Walking Initiative was a practice developed within the overarching CIVITAS ARCIMEDES project. ARCHIMEDES (2008-2012)
Time-Delay Electropneumatic Applications
Exercise 3-4 EXERCISE OBJECTIVE & & & To introduce time delays; To describe the operation of a time-delay valve; To describe the operation of a time-delay relay. DISCUSSION Time-Delays Time delays are
DATA ITEM DESCRIPTION Title: Failure Modes, Effects, and Criticality Analysis Report
DATA ITEM DESCRIPTION Title: Failure Modes, Effects, and Criticality Analysis Report Number: Approval Date: 20160106 AMSC Number: N9616 Limitation: No DTIC Applicable: Yes GIDEP Applicable: Yes Defense
PL estimation acc. to EN ISO
PL estimation acc. to EN ISO 3849- Example calculation for an application MAC Safety / Armin Wenigenrath, January 2007 Select the suitable standard for your application Reminder: The standards and the
COMPRESSOR PACK SUCTION CONTROLLER TYPE: LP41x
Electrical Installation Requirements Care should be taken to separate the power and signal cables to prevent electrical interference and possible damage due to inadvertent connection. SUPPLY E L N LN2
Computer Simulation Programms in Mine Rescue Education and Training, on the Example of Student Mine Rescue Teams
Computer Simulation Programms in Mine Rescue Education and Training, on the Example of Student Mine Rescue Teams Prof. Dr.-Ing. Helmut Mischo 1, Prof Dr.-Ing. Jürgen Brune 2 1 Technische Universität Bergakademie
Operational Comparison of Transit Signal Priority Strategies
Operational Comparison of Transit Signal Priority Strategies Revision Submitted on: November, 0 Author: Adriana Rodriguez, E.I Assistant Engineer Parsons Brinckerhoff 0 South Orange Avenue, Suite 00 Orlando,
Accellera Systems Initiative SystemC Standards Update
Accellera Systems Initiative SystemC Standards Update Martin Barnasconi (NXP), Philipp A. Hartmann (Intel), Stephan Schulz (Fraunhofer) Accellera Systems Initiative Presentation Overview Accellera Overview
ELE 455/555 Computer System Engineering. Section 2 The Processor Class 4 Pipelining with Hazards
ELE 455/555 Computer System Engineering Section 2 The Processor Class 4 Pipelining with Hazards Overview Simple Datapath 2 tj Overview Pipeline Control 3 tj Data Hazards Data Hazards sub $2,$1,$3 $2 =?
Why do I need dual channel safety? Pete Archer - Product Specialist June 2018
Why do I need dual channel safety? Pete Archer - Product Specialist June 2018 To answer this, we need some basic background information. First why is safety needed? Here are 4 good reasons. 1. To Protect
Standard Chiller 1/4 compressors Manual version: /10/96
Application program for Macroplus II Standard Chiller 1/4 compressors Manual version: 1.4-18/10/96 Program code: EP000ECH02 Rif.: 68EM Contents 0$,1)($785(6 HARDWARE...2 FUNCTIONS OF THE SYSTEM...3 PROTECTIONS...3
Bidirectional Forwarding Detection Routing
This chapter describes how to configure the ASA to use the Bidirectional Forwarding Detection (BFD) routing protocol. About BFD Routing, page 1 Guidelines for BFD Routing, page 5 Configure BFD, page 5
E-Milad (Birthday Qf Prophet Mohammad) 3. Maha Shivaratri March 02 PhaIguna 11 Wednesday SAKA ERA 1933
To be published in Delhi Gazette Part-IV (Extraordinary) GOVERNMENT OF NATIONAL CAPITAL TERRITORY OF DELHI GENERAL ADMINISTRATION DEPARTMENT (CO-ORDINATION BRANCH) DELHI SECRETAl%TAT - 110113, Y.P. ESTATE,
Configuring Bidirectional Forwarding Detection for BGP
CHAPTER 7 Configuring Bidirectional Forwarding Detection for BGP This chapter describes how to configure Bidirectional Forwarding Detection (BFD) for BGP. This chapter includes the following sections:
Technology Corner Dating of Electronic Hardware for Prior Art Investigations
Technology Corner Dating of Electronic Hardware for Prior Art Investigations Sellam Ismail VintageTech sellam@vintagetech.com http://vintagetech.com INTRODUCTION AND BACKGROUND In many legal matters, specifically
Gas Module for Series GMS800
Title Page SUPPLEMENTARY OPERATING INSTRUCTIONS Gas Module for Series GMS800 Components Application Information Operating Data Document Information Described Product Product name: Gas Module Basic device:
* Analysis of TCG ( Total Combustible Gas ) and 6 kinds of Gases * High Sensitivity for C 2
Portable DGA Dissolved Gas Analyzer MITSUBISHI Portable Dissolved Gas Analyzer (PGA-300) is used to analyze 6 kinds of dissolved gases in transformer oil, thereby improving prompt action
Series 3730 and Series 3731 EXPERTplus Valve Diagnostics with Partial Stroke Test (PST)
Series 3730 and Series 3731 EXPERTplus Valve Diagnostics with Partial Stroke Test (PST) Application Positioner firmware for early detection of control valve faults giving maintenance recommendations. Valid
& Role of Powerline Carrier
Countdown Pedestrian Signals & Role of Powerline Carrier Richard W. Wall, Ph.D. NIATT Department tof Electrical l & Computer Engineering 9/15/2008 University of Idaho NIATT 1 Presentation Outline Rules,
UNIVERSITY OF WATERLOO
UNIVERSITY OF WATERLOO Department of Chemical Engineering ChE 524 Process Control Laboratory Instruction Manual January, 2001 Revised: May, 2009 1 Experiment # 2 - Double Pipe Heat Exchanger Experimental
Addressing DDR5 design challenges with IBIS-AMI modeling techniques
Addressing DDR5 design challenges with IBIS-AMI modeling techniques Todd Westerhoff, SiSoft Doug Burns, SiSoft Eric Brock, SiSoft DesignCon 2018 IBIS Summit Santa Clara, California February 2, 2018 Agenda
MEDICAL EQUIPMENT IV MECHANICAL VENTILATORS. Prof. Yasser Mostafa Kadah
MEDICAL EQUIPMENT IV - 2013 MECHANICAL VENTILATORS Prof. Yasser Mostafa Kadah Mechanical Ventilator A ventilator is a machine, a system of related elements designed to alter, transmit, and direct energy
Faculty of Medicine Calendar for the Academic Year
Faculty of Medicine Calendar for the Academic Year 2018-2019 PHASE I CELL SCIENCES - I SUBJECT COMMITTEE Start Date October 08, 2018 End Date November 29, 2018 Exam Date November 30, 2018 CELL SCIENCES
Autonomous blimp control with reinforcement learning
University of Wollongong Research Online University of Wollongong Thesis Collection 1954-2016 University of Wollongong Thesis Collections 2009 Autonomous blimp control with reinforcement learning Yiwei
Accellera Systems Initiative SystemC Standards Update
Accellera Systems Initiative SystemC Standards Update Martin Barnasconi, Philipp A. Hartmann, Trevor Wieman Inaugural DVCon Europe, October 14, 2014 Accellera Systems Initiative Presentation Overview Accellera
Training Fees 3,400 US$ per participant for Public Training includes Materials/Handouts, tea/coffee breaks, refreshments & Buffet Lunch.
Training Title DISTRIBUTED CONTROL SYSTEMS (DCS) 5 days Training Venue and Dates DISTRIBUTED CONTROL SYSTEMS (DCS) Trainings will be conducted in any of the 5 star hotels. 5 22-26 Oct. 2017 $3400 Dubai,
C. Mokkapati 1 A PRACTICAL RISK AND SAFETY ASSESSMENT METHODOLOGY FOR SAFETY- CRITICAL SYSTEMS
C. Mokkapati 1 A PRACTICAL RISK AND SAFETY ASSESSMENT METHODOLOGY FOR SAFETY- CRITICAL SYSTEMS Chinnarao Mokkapati Ansaldo Signal Union Switch & Signal Inc. 1000 Technology Drive Pittsburgh, PA 15219 Abstract
5.1 Introduction. Learning Objectives
Learning Objectives 5.1 Introduction Statistical Process Control (SPC): SPC is a powerful collection of problem-solving tools useful in achieving process stability and improving capability through the
(C) Anton Setzer 2003 (except for pictures) A2. Hazard Analysis
A2. Hazard Analysis In the following: Presentation of analytical techniques for identifyin hazards. Non-formal, but systematic methods. Tool support for all those techniques exist. Techniques developed
Front-end Realization of ASIC for Traffic Light Control with Real Time Clock Synchronization
Front-end Realization of ASIC for Traffic Light Control with Real Time Clock Synchronization Mukul Bhargava M.Tech Scholar Deptt. of Elex. & Instr., Shri G.S. Institute of technology, Indore-452003 (M.P.)
Biped Walking Robot Control System Design
69 Biped Walking Robot Control System Design Jian Fang Abstract For biped walking robot posture instability problems presented this paper, ZMP gait planning algorithm and a time division multiplexing servo