December 2018 "F" COMPRESSION CONNECTORS RG6 "F" TYPE RG11 CONNECTOR COMPRESSION F PLUG TO F SOCKET RIGHT ANGLE "F" MALE TO "F" MALE BARREL ADAPTOR

Size: px

Start display at page:

Download "December 2018 "F" COMPRESSION CONNECTORS RG6 "F" TYPE RG11 CONNECTOR COMPRESSION F PLUG TO F SOCKET RIGHT ANGLE "F" MALE TO "F" MALE BARREL ADAPTOR"

Virgil Glenn
5 years ago
Views:

Jonsa TV RF Accessories "F" TYPE RG11 CONNECTOR COMPRESSION FOXTEL APPROVAL F30709 The APFTRSF11L Foxtel F Type

62 "F" MALE TO "F" MALE BARREL ADAPTOR FOXTEL APPROVED F30563 F-Type plug (Male) to F-Type plug (Male).

30 DUE END OF JAN 2019 "F" COMPRESSION CONNECTORS RG6 FOXTEL APPROVED F30574 The TRS compression connector is

Sealing protection, cable retention & RFI integrity are provided through dual compression rings that guarantee

72 F PLUG TO F SOCKET RIGHT ANGLE FOXTEL APPROVED F30573 F Right Angle Male to Female Type Bulk APF/FFR3 $1.

(Female) barrel joiner 3GHz. Foxtel approved F30583. Includes nut and washer. APFF/FF3NW $0.60 $0.

Metal housing. FOXTEL Approved F30564. APFF/FQ3 $1.40 $1.

1 Jonsa TV RF Accessories "F" TYPE RG11 CONNECTOR COMPRESSION FOXTEL APPROVAL F30709 The APFTRSF11L Foxtel F Type Connector is a compression F-type connectors for RG11 coaxial cable Foxtel Approval: F30709 APFTRSF11L $6.25 $5.62 "F" MALE TO "F" MALE BARREL ADAPTOR FOXTEL APPROVED F30563 F-Type plug (Male) to F-Type plug (Male). Foxtel approved F APF/F $1.45 $1.30 DUE END OF JAN 2019 "F" COMPRESSION CONNECTORS RG6 FOXTEL APPROVED F30574 The TRS compression connector is designed for fast, convenient installation, while retaining superior performance across the cable. Sealing protection, cable retention & RFI integrity are provided through dual compression rings that guarantee performance regardless of cable type. Corrosion resistant. APFTRSF6L $0.80 $0.72 F PLUG TO F SOCKET RIGHT ANGLE FOXTEL APPROVED F30573 F Right Angle Male to Female Type Bulk APF/FFR3 $1.35 $1.22 F SOCKET TO PAL PLUG FOXTEL APPROVED FOXTEL APPROVED F10437 PAL male to 'F' female adaptor. Foxtel Approved F10437 AP1/FF $1.35 $1.21 F PLUG TO PAL SOCKET FOXTEL APPROVED FOXTEL APPROVED F10156 PAL female to 'F' male adaptor. Foxtel Approved F10156 AP3/F $1.50 $1.35 'F' TO 'F' BARREL ADAPTOR TO SUIT FOXTEL FOXTEL APPROVED F30583 F-type socket (Female) to F-type socket (Female) barrel joiner 3GHz. Foxtel approved F Includes nut and washer. APFF/FF3NW $0.60 $0.54 'F' FEMALE TO F QUICK PUSH ON 'F' MALE FOXTEL FOXTEL APPROVED F30564 'F' socket to Quick Push On 'F' plug. Metal housing. FOXTEL Approved F APFF/FQ3 $1.40 $ OHM F TYPE TERMINATOR FOXTEL FOXTEL APPROVED F30732 F-Type Plug (Male). 75 Ohm Terminator with O-ring. FOXTEL Approved F30732 APFDM1 $0.45 $0.40 DOUBLE 'F' FEMALE WALL PLATE 3GHz FOXTEL FOXTEL APPROVED F x F to F sockets wall plate. 3GHz rating for high definition applications. Foxtel approved F AP022FOX3 $2.75 $2.48 'F' FEMALE TO 'F' FEMALE ENTRY BOX FOXTEL FOXTEL APPROVED F30582 Professional quality "F" to "F" socket through entry box, easy to install. Foxtel Approved F30582 APO1FOX3 $1.50 $1.35 'F' FEMALE WALL PLATE 3GHz FOXTEL APPROVED FOXTEL APPROVED F30577 F to F sockets wall plate. 3GHz rating for high definition applications. Foxtel approved F APO2FOX3 $1.80 $1.62 WN966GME-1

SATELLITE MULTISTACKER FOXTEL APPROVED FOXTEL APPROVED F30975 DS/MS FOXTEL approved satellite multistacker with built-in DVB-S/S2 tuner and decoder is a standalone device that can be installed

The Multistacker has 4 input ports which cater for low & high band signals. It has 2 ports on the bottom for local and remote power for the multistacker. DS/MS $297.50 $267.

input PSU to RF/ DC out to active devices DS/MSPI $6.80 $6.

interference to DVB-T reception. This will allow you to have trouble free digital TV viewing. ABFLTE $12.75 $11.

Terrestrial frequency: 5-862MHz Satellite frequency: 950-2400MHz Foxtel Approved F30979 DSTD/MS $4.50 $4.

2 SATELLITE MULTISTACKER FOXTEL APPROVED FOXTEL APPROVED F30975 DS/MS FOXTEL approved satellite multistacker with built-in DVB-S/S2 tuner and decoder is a standalone device that can be installed directly after a twin or quad universal dual polarisation LNBF. It is typically installed before the first distribution point in the SMATV system. The Multistacker has 4 input ports which cater for low & high band signals. It has 2 ports on the bottom for local and remote power for the multistacker. DS/MS $ $ F TYPE POWER INJECTOR TO SUIT FOXTEL FOXTEL APPROVED F30980 This power injector is designed for injecting DC power into a satellite multistacker distribution system, such as the DS/MS multistacker. 30Vdc 2A rated. Foxtel approved F Used to remote power the multistacker or the active taps Solder back body with high quality housing Earthing terminals included with wall mounting lugs built into the housing Power injection from DC input PSU to RF/ DC out to active devices DS/MSPI $6.80 $6.12 'F' MALE TO 'F' FEMALE LTE FILTER FOXTEL FOXTEL APPROVED F30874 The 'F' Male to 'F' Female LTE filter is used for filtering unwanted signals above 694MHz from 4G/ LTE transmitters, which can cause interference to DVB-T reception. This will allow you to have trouble free digital TV viewing. ABFLTE $12.75 $11.47 SATELLITE IF/TERRESTRIAL RF DIPLEXER FOXTEL FOXTEL APPROVED F30979 Mix or separate Satellite and Terrestrial signals for RF distribution Power passing from SAT IF Out to In and IN to SAT IF Out Terrestrial frequency: 5-862MHz Satellite frequency: MHz Foxtel Approved F30979 DSTD/MS $4.50 $4.05 FOXTEL APPROVED COMPRESSION CRIMP TOOL KIT FOXTEL APPROVED This premium quality installation kit contains many useful tools designed for FOXTEL installation. 30 x RG6 F-type FOXTEL Connectors 1 x Cable Cutting Tool 1 x Cable Stripper for RG59 RG6 or RG6Q type cable 1 x Compression Tool to suit RG59, RG6 and RG11 PCT connectors 1 x Torque Tool for FOXTEL connectors 1 x Carry Case Type Tool Kit TKIT4 $ COMPRESSION TOOL FOXTEL APPROVED FOXTEL APPROVED F30718 This premium quality compression tool is suitable to use on Foxtel PCT Type connectors. Compression Tool to suit RG59, RG6 and RG11 FOXTEL & PCT type connectors TCA10CT $ $ PLUMBING SILICONE SEALANT TUBE 300g FOXTEL APPROVED F30892 This Foxtel approved silicone sealant is ideal for roofing, gutters and outdoor applications. It has an excellent adhesion quality, which makes it the perfect solution for installing antenna and satellite dish mounting hardware. AMASC $8.50 $7.65 COMPRESSION TOOL RG59 / RG6 FOXTEL F30973 FOXTEL APPROVED F30973 The TCTRHCT F connector compression tool is compatible with RG6 and RG59 PCT F type connectors. During compression, the connector is supported by a 360 balanced compression surface for consistent installations every time. TCTRHCT $65.00 $ M BLACK INSULATION TAPE FOXTEL APPROVED F30893 This PVC tape provides excellent electrical insulation and adhesion to suit air antenna installations. It comes as a standard size of 18mm wide. Length 20M AMAPVC $1.85 $1.66 WN966GME-2

75Ω RG6 QUAD-SHIELDED COAX CABLE SIAMESE FOXTEL APPROVED F30432 Premium quality pay tv approved RG6 Quad shielded coax cable with 0.86mm thick outer PVC jacket. 1.

Overall diameter 7.54mm. 150M wooden drum. Length Packaging 150M Reel CRG6UBQS $139.

305M wooden drum. Length Packaging 305M Reel CRG6UBQF $115.00 75Ω RG6 QUAD-SHIELDED COAX CABLE FOXTEL APPROVED F10129 Premium quality pay tv approved RG6 Quad shielded coax cable with 0.

00 RG11 QUAD SHIELD COAXIAL CABLE 305M DRUM FOXTEL APPROVED F10175 Premium quality Pay TV approved RG11 Quad shielded coax cable with 0.94mm thick outer PVC jacket. 1.

Overall diameter 10.34mm. 305 metre per reel. Length 305M CRG11BQ $339.00 TWIN OFFSET KU LO 10.

3 75Ω RG6 QUAD-SHIELDED COAX CABLE SIAMESE FOXTEL APPROVED F30432 Premium quality pay tv approved RG6 Quad shielded coax cable with 0.86mm thick outer PVC jacket. 1.02mm copper clad steel centre conductor. 4.57mm foamed HD polyethylene dielectric. 60 micron thick bonded laminated aluminium foil shielding tape. 4.78mm core diameter. Aluminium alloy wire braided. Overall diameter 7.54mm. 150M wooden drum. Length Packaging 150M Reel CRG6UBQS $ Ω RG6 QUAD-SHIELDED COAX CABLE FLOODED FOXTEL APPROVED F30059 Premium quality pay tv approved RG6 Quad shielded coax cable with 0.86mm thick outer PVC jacket. 1.02mm copper clad steel centre conductor. 4.57mm foamed HD polyethylene dielectric. 60 micron thick bonded laminated aluminium foil shielding tape. 4.78mm core diameter. Aluminium alloy wire braided. Overall diameter 7.54mm. 305M wooden drum. Length Packaging 305M Reel CRG6UBQF $ Ω RG6 QUAD-SHIELDED COAX CABLE FOXTEL APPROVED F10129 Premium quality pay tv approved RG6 Quad shielded coax cable with 0.86mm thick outer PVC jacket. 1.02mm copper clad steel centre conductor. 4.57mm foamed HD polyethylene dielectric. 60 micron thick bonded laminated aluminium foil shielding tape. 4.78mm core diameter. Aluminium alloy wire braided. Overall diameter 7.54mm. Length Packaging 100M Reel CRG6UBQ-1 $ M Box CRG6UBQ/B $ M Reel CRG6UBQ/R $ RG11 QUAD SHIELD COAXIAL CABLE 305M DRUM FOXTEL APPROVED F10175 Premium quality Pay TV approved RG11 Quad shielded coax cable with 0.94mm thick outer PVC jacket. 1.63mm copper clad steel centre conductor. 7.11mm foamed HD polyethylene dielectric. 60 micron thick bonded laminated aluminium foil shielding tape. 7.32mm core diameter. Aluminium alloy wire braided. Overall diameter 10.34mm. 305 metre per reel. Length 305M CRG11BQ $ TWIN OFFSET KU LO 10.7GHz LOW CURRENT FOXTEL APPROVED F30834 The low current twin output LNBF is used to connect 1 x PVR or 2 x standard receivers to a single dish Each receiver is able to select polarity independently The LNBF is commonly used for Foxtel or VAST services on Optus D3 & 10 The Acer LNBF has a L.O. frequency of 10.7 GHz Foxtel approved F30834 LNBTU-LC $62.50 $56.25 QUAD OFFSET KU LO 10.7GHz LOW CURRENT FOXTEL APPROVED F30835 The low current quad output LNBF is used to connect up to 2 x PVR Foxtel or 4 x standard receivers to a single dish Each receiver is able to select polarity independently The LNBF is commonly used for Foxtel or VAST services on Optus D3 & 10 The Acer LNBF has a L.O. frequency of 10.7 GHz LNBQU-LC $87.50 $78.75 WN966GME-3

2 WAY F-TYPE SPLITTER 5-2400MHz FOXTEL FOXTEL APPROVED F30984 The CAS2FA/MS 2 way splitter is designed for the entire terrestrial connectors. Foxtel Approved F30984. Power pass all ports.

83 4 WAY F-TYPE SPLITTER 5-2400MHz FOXTEL FOXTEL APPROVED F30986 The CAS4FA/MS 4 way splitter is designed for the entire terrestrial connectors. Foxtel Approved F30986. Power pass all ports.

98 8 WAY F-TYPE SPLITTER 5-2400MHz FOXTEL FOXTEL APPROVED F30988 The CAS8FA/MS 8 way splitter is designed for the entire terrestrial connectors. Foxtel Approved F30988. Power pass all ports.

4 2 WAY F-TYPE SPLITTER MHz FOXTEL FOXTEL APPROVED F30984 The CAS2FA/MS 2 way splitter is designed for the entire terrestrial connectors. Foxtel Approved F Power pass all ports. 2 Way F Type Splitter 4-6dB Insertion Loss Out to In. F30984 CAS2FA/MS $4.25 $ WAY F-TYPE SPLITTER MHz FOXTEL FOXTEL APPROVED F30986 The CAS4FA/MS 4 way splitter is designed for the entire terrestrial connectors. Foxtel Approved F Power pass all ports. 4 Way F Type Splitter dB Insertion Loss Out to In. F30986 CAS4FA/MS $7.75 $ WAY F-TYPE SPLITTER MHz FOXTEL FOXTEL APPROVED F30988 The CAS8FA/MS 8 way splitter is designed for the entire terrestrial connectors. Foxtel Approved F Power pass all ports. 8 Way F Type Splitter 13-16dB Insertion Loss Out to In. F30988 CAS8FA/MS $15.90 $ WAY F-TYPE SPLITTER REVERSE POWER PASS FOXTEL APPROVED F30982 The CAS3FA/MSRP 3 way splitter is designed for the entire terrestrial connectors. Foxtel Approved F Power pass in to all ports out. Splits the SMATV signal into two outputs for RF distribution Solder back body with high quality housing Earthing terminals included with wall mounting lugs built into housing All legs power passing feature from the input to all outputs. 7-9dB Insertion Loss F30982 CAS3FA/MSRP $6.90 $ WAY F-TYPE SPLITTER MHz FOXTEL FOXTEL APPROVED F30985 The CAS3FA/MS 3 way splitter is designed for the entire terrestrial connectors. Foxtel Approved F Power pass all ports. 3 Way F Type Splitter 7-9dB Insertion Loss Out to In. F30985 CAS3FA/MS $6.90 $ WAY F-TYPE SPLITTER MHz FOXTEL FOXTEL APPROVED F30987 The CAS6FA/MS 6 way splitter is designed for the entire terrestrial connectors. Foxtel Approved F Power pass all ports. 6 Way F Type Splitter dB Insertion Loss Out to In. F30987 CAS6FA/MS $14.50 $ WAY F-TYPE SPLITTER REVERSE POWER PASS FOXTEL APPROVED F30981 The CAS2FA/MSRP 2 way splitter is designed for the entire terrestrial connectors. Foxtel Approved F Power pass in to all ports out. Splits the SMATV signal into two outputs for RF distribution Solder back body with high quality housing Earthing terminals included with wall mounting lugs built into housing All legs power passing feature from the input to all outputs. 4-6dB Insertion Loss F30981 CAS2FA/MSRP $4.25 $ WAY F-TYPE SPLITTER REVERSE POWER PASS FOXTEL APPROVED F30983 The CAS4FA/MSRP 4 way splitter is designed for the entire terrestrial connectors. Foxtel Approved F Power pass in to all ports out. Splits the SMATV signal into two outputs for RF distribution Solder back body with high quality housing Earthing terminals included with wall mounting lugs built into housing All legs power passing feature from the input to all outputs dB Insertion Loss F30983 CAS4FA/MSRP $7.75 $6.98 WN966GME-4

Kingray TV RF Accessories SATELLITE MULTISTACKER - KINGRAY KMS-F1 FOXTEL APPROVED F30963 The Kingray KMS-F1 satellite multistacker is designed specifically for use with the Foxtel satellite platform.

It then restacks the vertical polarity transponder services onto a horizontal polarity, therefore allowing a single cable distribution method for up to 32 satellite transponders plus FTA services

Suitable for new SMATV installations but it allows the combined FTA - Satellite to be distributed down an existing single cable RF distribution network.

This allows Foxtel to make better use of Transponder space in the event that the total 32 transponders are used.

5 Kingray TV RF Accessories SATELLITE MULTISTACKER - KINGRAY KMS-F1 FOXTEL APPROVED F30963 The Kingray KMS-F1 satellite multistacker is designed specifically for use with the Foxtel satellite platform. It combines 2 horizontal & 2 vertical satellite services from 2 orbital locations. It then restacks the vertical polarity transponder services onto a horizontal polarity, therefore allowing a single cable distribution method for up to 32 satellite transponders plus FTA services once combined via a diplexer after the multistacker. Suitable for new SMATV installations but it allows the combined FTA - Satellite to be distributed down an existing single cable RF distribution network. The stacker has been fitted with a 5 position dip switch which is switched to match the State installed. This allows Foxtel to make better use of Transponder space in the event that the total 32 transponders are used. Small wall mountable design, simple installation High quality housing with heat sink Quad SAT IF inputs: 1H + 22kHz, 2V + 22kHz, 3H and 4V Dedicated F female connector input for 12Vdc local powering RF output can be used to remote power the multistacker Grounding screw for earthing Five way switch for state channel allocation by Foxtel KMS-F1 $ $ SUPER BROADBAND AMPLIFIER MHZ - KINGRAY OPTIMISED FOR DIGITAL TV SIGNAL AMPLIFICATION The Kingray DSB38F is a high gain Free-to-Air & Satellite distribution amplifier for use in SMATV applications. It features a combined single input & single output connector, with adjustable gain and equalisation controls, as well as input attenuators. Foxtel approved F Frequency Range: MHz, MHz Input/Outputs: 1 x Input / 1 x Outputs Maximum Gain 36dB (FTA), 41dB (Satellite) Return Loss: >10dB Gain Control: 10dB Supply Voltage: 12V or 18V DC Can be powered locally via a PSK124F or PSK18M or remotely via the RF input Size: 183x150x52mm DSB38F $ $ DUAL INPUT SATELLITE AMPLIFIER - KINGRAY FOXTEL APPROVED F-TYPE Dual input and F-Type satellite distribution amplifier. Capable of powering both vertical and horizontal LNB s simultaneously via the on board regulator. Gain Freq. 29dB MHz SAT29D $ $ dB MHz SAT42D $ $ SINGLE INPUT SATELLITE AMPLIFIERS - KINGRAY FOXTEL APPROVED F-TYPE The SAT25S & SAT40S are single input satellite distribution amplifiers are designed specifically for the new Foxtel single coax cable satellite distribution system. The SAT25S has a max gain of 25dB and the SAT40S has a max gain of 40dB. They feature high output with adjustable gain and equalisation controls. The amplifiers are designed to be powered by an 18V DC power supply, such as the Kingray PSK18S. They can be either locally or remotely powered. Gain Freq. 25dB MHz SAT25S $ $ dB MHz SAT40S $ $ WN966GME-5

FTA / SATELLITE DIPLEXER - KINGRAY FOXTEL APPROVED F30953 - POWER PASS The Kingray KDPTSF diplexer is designed for peak performance across the terrestrial & satellite bands up to 2400 MHz.

50 $3.15 2 WAY F-TYPE SPLITTER 5-2400MHz - KINGRAY FOXTEL APPROVED F30950 The Kingray KSP2F 2 way splitter is 2 Way F Type Splitter 4-5.5dB Insertion Loss KSP2F $3.00 $2.70 5-40 4.0 10 40-1000 4.

80 $3.42 5-40 7.5 10 40-1000 8.0 10 1000-1750 9.5 10 1750-2400 10.

10 5-40 11 10 40-1000 12 10 1000-1750 13 10 1750-2400 15 10 2 WAY F-TYPE SPLITTER 5-2400MHZ DC - KINGRAY FOXTEL APPROVED F30998 - REVERSE POWER PASS The Kingray KSP2FRPP 2 way splitter is Approved.

With this splitter, it allows the installer to power active taps remotely with the use of a PIK2400 & a PSK124F to provide power. KSP2FRPP $4.00 $3.60 5-40 4.0 10 40-1000 4.5 10 1000-1750 5.

6 FTA / SATELLITE DIPLEXER - KINGRAY FOXTEL APPROVED F POWER PASS The Kingray KDPTSF diplexer is designed for peak performance across the terrestrial & satellite bands up to 2400 MHz. This A class diplexer is compact in design with excellent screening characteristics and approved by Foxtel. Frequency Range: MHz, MHz Insertion Loss: 1.5dB Return Loss: 12dB KDPTSF $3.50 $ WAY F-TYPE SPLITTER MHz - KINGRAY FOXTEL APPROVED F30950 The Kingray KSP2F 2 way splitter is 2 Way F Type Splitter 4-5.5dB Insertion Loss KSP2F $3.00 $ WAY F-TYPE SPLITTER MHz - KINGRAY FOXTEL APPROVED F30951 The Kingray KSP3F 3 way splitter is 3 Way F Type Splitter dB Insertion Loss KSP3F $3.80 $ WAY F-TYPE SPLITTER MHz - KINGRAY FOXTEL APPROVED F30964 The Kingray KSP6F 6 way splitter is 6 Way F Type Splitter 11-15dB Insertion Loss KSP6F $9.00 $ WAY F-TYPE SPLITTER MHZ DC - KINGRAY FOXTEL APPROVED F REVERSE POWER PASS The Kingray KSP2FRPP 2 way splitter is Approved. Reverse Power Pass. The KSP2FRPP has been specifically designed for use in a multistacker system. With this splitter, it allows the installer to power active taps remotely with the use of a PIK2400 & a PSK124F to provide power. KSP2FRPP $4.00 $ WAY F-TYPE SPLITTER MHz - KINGRAY FOXTEL APPROVED F30952 The Kingray KSP4F 4 way splitter is 4 Way F Type Splitter dB Insertion Loss KSP4F $4.50 $ WAY F-TYPE SPLITTER MHz - KINGRAY FOXTEL APPROVED F30965 The Kingray KSP8F 8 way splitter is 8 Way F Type Splitter 11-15dB Insertion Loss KSP8F $11.00 $ WAY F-TYPE SPLITTER MHZ DC - KINGRAY FOXTEL APPROVED F REVERSE POWER PASS The Kingray KSP4FRPP 4 way splitter is designed for the entire terrestrial & satellite bands from 5 to 2400 MHz. Suits "F" type connectors. Foxtel Approved. Reverse Power Pass 2A max. The KSP4FRPP has been specifically designed for use in a multistacker system. With this splitter, it allows the installer to power active taps remotely with the use of a PIK2400 & a PSK124F to provide power. KSP4FRPP $6.00 $ WN966GME-6

8 PORT ACTIVE TAP 47-2400MHz - KINGRAY FOXTEL APPROVED F31011 The Kingray Active Taps are specially designed for the distribution of terrestrial & satellite (Foxtel ) services in a multiple dwelling

Can be locally or remotely powered Frequency Range 47-862 & 950-2400MHz 1 Input - 8 Output KAT8F $195.00 $175.

dwelling application. They feature high output with adjustable gain and equalisation control. 16 outlets 47-2400MHz. Can be locally or remotely powered.

50 24 PORT ACTIVE TAP 47-2400MHz - KINGRAY FOXTEL APPROVED F31095 The Kingray Active Taps are specially designed for the distribution of terrestrial & satellite (Foxtel ) services in a multiple

7 8 PORT ACTIVE TAP MHz - KINGRAY FOXTEL APPROVED F31011 The Kingray Active Taps are specially designed for the distribution of terrestrial & satellite (Foxtel ) services in a multiple dwelling application. They feature high output with adjustable gain and equalisation control. 8 outlets MHz. Can be locally or remotely powered Frequency Range & MHz 1 Input - 8 Output KAT8F $ $ PORT ACTIVE TAP MHz - KINGRAY FOXTEL APPROVED F31010 The Kingray Active Taps are specially designed for the distribution of terrestrial & satellite (Foxtel ) services in a multiple dwelling application. They feature high output with adjustable gain and equalisation control. 16 outlets MHz. Can be locally or remotely powered. Frequency Range & MHz 1 Input - 16 Output KAT16F $ $ PORT ACTIVE TAP MHz - KINGRAY FOXTEL APPROVED F31095 The Kingray Active Taps are specially designed for the distribution of terrestrial & satellite (Foxtel ) services in a multiple dwelling application. They feature high output with adjustable gain and equalisation control. 24 outlets MHz. Can be locally or remotely powered. Frequency Range & MHz 1 Input - 24 Output KAT24F TBA (Due Feb 2019) 32 PORT ACTIVE TAP MHz - KINGRAY FOXTEL APPROVED F30976 The Kingray Active Taps are specially designed for the distribution of terrestrial & satellite (Foxtel ) services in a multiple dwelling application. They feature high output with adjustable gain and equalisation control. 32 outlets MHz. Can be locally or remotely powered. Frequency Range & MHz 1 Input - 32 Output KAT32F $ $ WN966GME-7

2 WAY F-TYPE TAP - KINGRAY FOXTEL APPROVED 2 way F-Type passive tap.

2 Way Passive Tap Power Pass Through Port Tap Value -12dB KT212F $4.30 $3.

4 Way Passive Tap Power Pass Through Port Tap Value Insertion Loss -12dB 4-5dB KT412F $5.00 $4.50-15dB 3-4.

8 Way Tap F Type Power Pass Through Port Tap Value -16dB KT816F $12.00 $10.

Foxtel Approved F31017. PIK2400 $6.00 $5.

terminator that is DC blocked. KFTERM01 $1.90 $1.

8 2 WAY F-TYPE TAP - KINGRAY FOXTEL APPROVED 2 way F-Type passive tap. Works across the entire terrestrial & satellite bands up from 5 to 2400 MHz. Foxtel Approved. Power Pass Through Port. 2 Way Passive Tap Power Pass Through Port Tap Value -12dB KT212F $4.30 $ dB KT215F $4.30 $ WAY F-TYPE TAP - KINGRAY FOXTEL APPROVED 4 way F-Type passive tap. Works across the entire terrestrial & satellite bands up from 5 to 2400 MHz. Foxtel Approved. Power Pass Through Port. 4 Way Passive Tap Power Pass Through Port Tap Value Insertion Loss -12dB 4-5dB KT412F $5.00 $ dB 3-4.5dB KT415F $5.00 $ dB dB KT420F $5.00 $ WAY F-TYPE 16dB TAP - KINGRAY FOXTEL APPROVED F way F-Type passive tap. Works across the entire terrestrial & satellite bands up from 5 to 2400 MHz. Foxtel Approved. Power Pass Through Port. 8 Way Tap F Type Power Pass Through Port Tap Value -16dB KT816F $12.00 $10.80 F-TYPE POWER INJECTOR - KINGRAY FOXTEL APPROVED F31017 F-Type power injector up to 60V DC 2A max. Operates at the frequency MHz. For use to remotely power active taps or multistacker, in conjunction with a suitable power supply. Foxtel Approved F PIK2400 $6.00 $5.40 IN-LINE DC BLOCK F MALE TO F FEMALE FOXTEL APPROVED F31082 The KDBLOCK is an in-line DC block with a voltage rating at 100V DC max. KDCBLOCK TBA (Due Feb 2019) 75 OHM F-TERMINATOR DC BLOCKING - KINGRAY FOXTEL APPROVED F30999 The KFTERM01 is a 75 ohm terminator that is DC blocked. KFTERM01 $1.90 $1.71 POWER SUPPLY & LINE INJECTORS - KINGRAY FOXTEL APPROVED Power supplies to be used with Kingray TV and SAT accessories Description 12 VDC 2 Amp PSK124F $60.00 $ VDC 500mA (DC Plug). PSK18S $21.00 $ VDC 500mA (F Type) Male PSK18M $21.00 $ VDC 500mA (F Type) Male (excludes power cord) PSK183F TBA (Due February 2019) PSK18S PSK124F PSK18M PSK183F WN966GME-8

9 ZyCast Foxtel Approved Modulators SINGLE INPUT FOXTEL APPROVED MODULATOR - ZYCAST HDMI TO DIGITAL RF HD DVB-T MODULATOR The KT-FX1 is a Foxtel approved single input (HDMI) HD digital modulator that encodes HDMI signal to any DTV channel. Pre-programmed with a Foxtel approved channel listing MHz to 816.5MHz (CH6 to CH69). 90dB and MER >38dB. H.264 AVC (MPEG-4) MPEG Layer II/AAC to distribute a crystal-clear 1080p Full-HD picture over a new or existing coaxial cable TV installation. Programming of the KT-FX1 is done via a web GUI and front LCD panel. KT-FX1 $ Foxtel Contract Installer Enquiries Welcome SINGLE IN FOXTEL APPROVED MODULATOR AUDIO OUT - ZYCAST HDMI TO DIGITAL RF HD DVB-T MODULATOR WITH AUDIO OUT The KT-FX1DA is a Foxtel approved single input (HDMI) HD digital modulator that encodes Full-HD 1080p HDMI signal to any Australian DTV channel. Pre-programmed with Foxtel approved channel listings. Frequency range of 177.5MHz to 816.5MHz (CH6 to CH69). Output level of 90dB and MER of >38dB. Video compression is via H.264 AVC (MPEG-4) and audio compression via MPEG Layer II/AAC to distribute a crystal-clear Foxtel over new or existing coaxial cable. In addition, the KT-FX1DA allows the modulator source audio (output via RCA) to distribute to a PA amplifier. This audio has adjustable timing for matching the latency delay of the HD picture. This makes ZyCast the ideal solution for pub and club installations. Programming of the KT-FX1DA is done via a web GUI and front LCD panel. KT-FX1DA $ Foxtel Contract Installer Enquiries Welcome FOUR INPUT FOXTEL APPROVED MODULATOR - ZYCAST HDMI TO DIGITAL RF HD DVB-T MODULATOR The KT-FX4 is a Foxtel approved quad input (HDMI) HD digital modulator that encodes Full-HD 1080p signals to any DTV channels. Pre-programmed with a Foxtel approved channel listing. Frequency range of 177.5MHz to 816.5MHz (CH6 to CH69). Output level of 90dB and MER of >38dB, the KT-FX4 makes use of video compression via H.264 AVC (MPEG-4) and audio compression via MPEG Layer II/AAC to distribute four crystal-clear HD pictures over new or existing coaxial cable. Programming of the KT-FX4 is done via a web GUI and front LCD panel. KT-FX4 $1, Foxtel Contract Installer Enquiries Welcome FOUR INPUT FOXTEL APPROVED MODULATOR WITH RCA AUDIO OUT - ZYCAST HDMI TO DIGITAL RF HD DVB-T MODULATOR WITH AUDIO OUT The KT-FX4DA is a genuine Foxtel approved quad input (HDMI) 1080p Full-HD digital modulator that encodes HDMI signals to any Australian DTV channel for easy, convenient HD-TV AV distribution. Pre-programmed with Foxtel approved channel listing. With an output level of 90dB and MER of >38dB, the KT-FX4DA makes use of video compression via H.264 AVC (MPEG-4) and audio compression via MPEG Layer II/AAC to distribute four crystal-clear full HD pictures over a new or existing TV coaxial cable installation. In addition, the KT-FX4DA allows one of the modulators sources audio (output via RCA) to distribute to a PA amplifier plus you can also easily adjust the delay in the audio signal for perfect lip-sync if required. This makes the KT-FX4DA an ideal solution for pub and club installations. Programming of the KT-FX4DA is done via a web GUI and front LCD panel. Frequency range of 177.5MHz to 816.5MHz (CH6 to CH69). KT-FX4DA $2, Foxtel Contract Installer Enquiries Welcome WN966GME-9

Amphenol RF. Type N. Type N Connectors. Type N. Description. Features/Benefits. Applications

Amphenol RF. Type N. Type N Connectors. Type N. Description. Features/Benefits. Applications Amphenol RF 144 Connectors Description Named after Paul Neill of Bell Labs after being developed in the 1940 s, the offered the first true microwave performance. The connector was developed to satisfy