PIP PN03SA0S01 Piping Material Specification 3SA0S01 Class 300, 304/304L Stainless Steel, Socket Weld, C.A., Process
|
|
- Gervais Henry
- 5 years ago
- Views:
Transcription
1 May 2016 Piping PIP PN03SA0S01 Piping Material Specification 3SA0S01 Class 300, 304/304L Stainless Steel, Socket Weld, C.A., Process
2 PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice has been prepared from the technical requirements in the existing standards of major industrial users, contractors, or standards organizations. By harmonizing these technical requirements into a single set of Practices, administrative, application, and engineering costs to both the purchaser and the manufacturer should be reduced. While this Practice is expected to incorporate the majority of requirements of most users, individual applications may involve requirements that will be appended to and take precedence over this Practice. Determinations concerning fitness for purpose and particular matters or application of the Practice to particular project or engineering situations should not be made solely on information contained in these materials. The use of trade names from time to time should not be viewed as an expression of preference but rather recognized as normal usage in the trade. Other brands having the same specifications are equally correct and may be substituted for those named. All Practices or guidelines are intended to be consistent with applicable laws and regulations including OSHA requirements. To the extent these Practices or guidelines should conflict with OSHA or other applicable laws or regulations, such laws or regulations must be followed. Consult an appropriate professional before applying or acting on any material contained in or suggested by the Practice. This Practice is subject to revision at any time. Process Industry Practices (PIP), Construction Industry Institute, The University of Texas at Austin, 3925 West Braker Lane (R4500), Austin, Texas PIP Member Companies and Subscribers may copy this Practice for their internal use. Changes or modifications of any kind are not permitted within any PIP Practice without the express written authorization of PIP. Authorized Users may attach addenda or overlays to clearly indicate modifications or exceptions to specific sections of PIP Practices. Authorized Users may provide their clients, suppliers and contractors with copies of the Practice solely for Authorized Users purposes. These purposes include but are not limited to the procurement process (e.g., as attachments to requests for quotation/ purchase orders or requests for proposals/contracts) and preparation and issue of design engineering deliverables for use on a specific project by Authorized User s client. PIP s copyright notices must be clearly indicated and unequivocally incorporated in documents where an Authorized User desires to provide any third party with copies of the Practice. PUBLISHING HISTORY October 1995 Issued as PIP PN03SA0P February 2000 Revision May 2016 Complete Revision February 1999 Revision February 2001 Technical Correction June 1999 Revision October 2006 Complete Revision Not printed with State funds
3 SERVICE: Process MATERIAL: 304/304L Dual Marked RATING CLASS: 300, ASME B DESIGN CODE: ASME B TEMPERATURE LIMIT: -29 C to 425 C (-20 F to 800 F) (Note 09) STRESS RELIEF: None Required NOMINAL CORROSION ALLOWANCE: None EXAMINATION: Per ASME B31.3 PRESSURE - TEMPERATURE RATINGS METRIC UNITS For NPS 1/2 through NPS 14 (Full flange ratings per ASME B16.5, Table ) For NPS 16 through 24 see Note 01 TEMP ºC -29 to BAR PRESSURE - TEMPERATURE RATINGS US CUSTOMARY UNITS For NPS 1/2 through NPS 14 (Full flange ratings per ASME B16.5, Table II ) For NPS 16 through 24 see Note 01 TEMP ºF -20 to PSIG ITEM NOTES NPS SCH/RAT ENDS DESCRIPTION USER CODE PIPE 01, 23 1/2-1-1/2 40S SS, SMLS, ASTM A312-TP 304/304L 2 40S SS, EFW, ASTM A312-TP 304/304L (Ej=0.80) S SS, EFW, ASTM A312-TP 304/304L (Ej=0.80) S SS, EFW, ASTM A312-TP 304/304L (Ej=0.80) Calc SS, EFW, ASTM A312-TP 304/304L (Ej=0.80) NIPPLES 03, 23 Branch 1/2-1-1/2 40S SS, SMLS, ASTM A312-TP 304/304L Swage (CONC) 1/2-2 40S SS, ASTM A403-WP 304/304L-S, MSS SP-95 Swage (ECC) 1/2-2 40S SS, ASTM A403-WP 304/304L-S, MSS SP-95 FITTINGS 02 Sockolet 1/2-1-1/2 Class 3000 SW SS, ASTM A182-F304/304L, MSS SP-97 Thredolet 03 1/2-2 Class 3000 SW SS, ASTM A182-F304/304L, MSS SP-97 SW Latrolet 1/2-1-1/2 Class 3000 SW SS, ASTM A182-F304/304L, MSS SP-97 THRD Latrolet 03 1/2-2 Class 3000 SW SS, ASTM A182-F304/304L, MSS SP-97 SW Elbolet 170 1/2-1-1/2 Class 3000 SW SS, ASTM A182-F304/304L THRD Elbolet 03, 170 1/2-2 Class 3000 SW SS, ASTM A182-F304/304L 90 ELL 1/2-1-1/2 Class 3000 SW SS, ASTM A182-F304/304L, ASME B ELL 1/2-1-1/2 Class 3000 SW SS, ASTM A182-F304/304L, ASME B16.11 Tee 1/2-1-1/2 Class 3000 SW SS, ASTM A182-F304/304L, ASME B16.11 Tee (RED) 1/2-1-1/2 Class 3000 SW SS, ASTM A182-F304/304L, ASME B16.11 Plug 03 1/2-2 THRD SS, ASTM A182-F304/304L, round head, ASME B16.11 Plug 53 1/2-2 PE SS, ASTM A182-F304/304L, round head, ASME B16.11 Coupling 1/2-1-1/2 Class 3000 SW SS, ASTM A182-F304/304L, ASME B16.11 Coupling (RED) 1/2-1-1/2 Class 3000 SW SS, ASTM A182-F304/304L, ASME B16.11 Coupling 03 1/2-2 Class 3000 THRD SS, ASTM A182-F304/304L, ASME B16.11 Coupling (RED) 03 1/2-2 Class 3000 THRD SS, ASTM A182-F304/304L, ASME B16.11 Cap 1/2-1-1/2 Class 3000 SW SS, ASTM A182-F304/304L, ASME B16.11 Cap 03 1/2-2 Class 3000 THRD SS, ASTM A182-F304/304L, ASME B16.11 Reducing Insert 1/2-1-1/2 Class 3000 SW SS, ASTM A182-F304/304L, MSS SP-79 Union (GJ) 1/2-1-1/2 Class 3000 SW SS, ASTM A182-F304/304L, integral seat, MSS SP-83 Reducer (CONC) 2-24 Weld SS, ASTM A403-WP 304/304L-W, ASME B16.9 Reducer (ECC) 2-24 Weld SS, ASTM A403-WP 304/304L-W, ASME B16.9 BW Pipet Weld SS, ASTM A182-F304/304L, MSS SP LR ELL 2-24 Weld SS, ASTM A403-WP 304/304L-W, ASME B LR ELL 2-24 Weld SS, ASTM A403-WP 304/304L-W, ASME B16.9 Tee 2-24 Weld SS, ASTM A403-WP 304/304L-W, ASME B16.9 Tee (RED) 2-24 Weld SS, ASTM A403-WP 304/304L-W, ASME B16.9 Cap 2-24 Weld SS, ASTM A403-WP 304/304L-S, ASME B16.9 Stub End LJ Weld SS, ASTM A403-WP 304/304L-W, ASME B16.9, short pattern Process Industry Practices Page 1 of 3
4 ITEM NOTES NPS SCH/RAT ENDS DESCRIPTION USER CODE VALVES Gate 1/2-2 Class 300 SW 316L SS body w/ Trim 12 GA03SU301 Gate 1/2-2 Class 800 SW 316L SS body w/ Trim 12 GA08SU300 Gate 06 1/2-2 Class 300 T/SW 316L SS body w/ Trim 12 GA03SU201 Gate 1/2-24 Class 300 RF 316 SS body w/ Trim 12, FP GA03ST501 Gate 06 1/2-2 Class 800 T/SW 316L SS ext body w/ Trim 12, GA08SU200 Globe 1/2-2 Class 300 SW 316L SS body w/ Trim 12 GL03SU301 Globe 1/2-2 Class 800 SW 316L SS body w/ Trim 12 GL08SU300 Globe 3-12 Class 300 RF 316 SS body w/ Trim 12 GL03ST500 Lift Check 61 1/2-2 Class 300 SW 316L SS body w/ Trim 10 piston CL03SU301 Lift Check 61 1/2-2 Class 800 SW 316L SS body w/ Trim 10, piston CL08SU300 Wafer Dual PLT 07, 26, 63, 3-24 Class 300 RF 316 SS body w/ Trim 10 CD03ST700 Check 160 Lug Dual PLT 26, Class 300 RF 316 SS body w/ Trim 10 CD03ST702 Check Swing Check Class 300 RF 316 SS body w/ Trim 10 CS03ST501 Dual PLT Check 26, Class 300 RF 316 SS body w/ Trim 10 CD03ST510 Ball 09 1/2-2 Class 300 SW 316L SS body w/ 316 SS trim, R-PTFE ST BA03SU300 Ball Class 300 RF 316 SS body w/ 316 SS trim, R-PTFE ST BA03ST503 Ball Class 300 RF 316 SS body w/ 316 SS trim, R-PTFE ST, GO BA03ST505 Ball 08, Class 300 RF 316 SS body w/ 316 SS trim, R-PTFE ST, FP BA03ST502 Ball 08, Class 300 RF 316 SS body w/ 316 SS trim, R-PTFE ST, GO, FP BA03ST504 Ball Class 300 RF 316 SS body w/ 316 SS trim, R-PTFE ST, GO BA03ST500 Ball 08, Class 300 RF 316 SS body w/ 316 SS trim, R-PTFE ST, GO, FP BA03ST501 Ball 06, 09 1/2-2 Class 300 T/SW 316L SS body w/ 316 SS trim, R-PTFE ST BA03SU200 Wafer Butterfly 07, 09, Class 300 RF 316 SS body w/ 316 SS trim, 316 SS/PTFE ST BF03ST700 Wafer Butterfly 07, 09, Class 300 RF 316 SS body w/ 316 SS trim, 316 SS/PTFE ST, GO BF03ST701 Lug Butterfly 09, 26, Class 300 RF 316 SS body w/ 316 SS trim, 316 SS/PTFE ST BF03ST702 Lug Butterfly 09, 26, Class 300 RF 316 SS body w/ 316 SS trim, 316 SS/PTFE ST, GO BF03ST703 Lug Butterfly 09, 26, Class 300 RF 316 SS body w/ 316 SS trim, 316 SS/PTFE ST, GO BF03ST704 FLANGES 02 Socket Weld 1/2-1-1/2 Class 300 RF SS, ASTM A182-F304/304L, ASME B16.5 Blind 1/2-24 Class 300 RF SS, ASTM A182-F304/304L, ASME B16.5 Lap Joint Class 300 CS, ASTM A105, ASME B16.5 Weld Neck Class 300 RF SS, ASTM A182-F304/304L, ASME B16.5 Pair WN Orifice 2-24 Class 300 RF SS, ASTM A182-F304/304L, ASME B16.36, SW taps GASKETS 1/2-24 Class 300 Spiral wound type 304 SS winding, w/ flexible graphite filler, w/ 304 SS inner ring and CS outer ring, ASME B16.20 BOLTING Stud Bolts ASTM A193, Gr B7 stud, w/ 2 heavy hex nuts, ASTM A194, Gr 2H Cap Screw 178 ASTM A193, Gr. B7 heavy hex Process Industry Practices Page 2 of 3
5 90 BRANCH CONNECTION Legend and Chart BRANCH SIZE 24 T 20 E T 18 E R T 16 E E E T 14 E E E E T 12 W E E E E T 10 W W E E E E T 8 W W W E E E E T 6 W W W W E E E E T 4 W W W W W W E E E T 3 W W W W W W W W E E T 2 W W W W W W W W W E E T 1½ S S S S S S S S S S S S T 1 S S S S S S S S S S S S E T 3/4 S S S S S S S S S S S S E E T 1/2 S S S S S S S S S S S S E E E T ½ 1 3/4 1/2 HEADER SIZE E Reducing Tee S Sockolet T Tee W BW Pipet NOTES: 01 If a pipe schedule is shown under "SCH/RAT," it shall be adequate for the full flange rating. If "CALC" is shown, the pressure limit may be lower than full flange rating. 02 All butt-welded component thicknesses shall match the pipe thickness. 03 Threaded joints are permitted only at the outlet of vent and drain valves, hydrostatic connections, outlet instrument take-off valves, and to match equipment. 06 These valves shall be used only for vent, drain, and instrument connections. 07 These valves have no flanges but are installed between line flanges with extra-length bolts. 08 Full-port valves shall be used if indicated on the P&ID. 09 Pressure and temperature rating can be limited by certain components permitted by this Practice. Manufacturer's recommended pressure-temperature restrictions shall be consulted. 22 Stub ends with lap-joint back-up flanges may be used for temperatures up to 500ºF (260ºC). For higher temperatures, weld-neck flanges shall be used. 23 Sch 80S pipe and pipe nipples shall be used for threaded connections for sizes NPS 1/2 through NPS To be used only if indicated on the P&ID. 53 To be used where required for pipe supports, dummy legs and unused socketweld taps. 61 These check valves shall be installed in a horizontal position with cover up. 62 These check valves shall be installed in a horizontal position with cover up or in a vertical position with upward flow. 63 These check valves shall be installed in a horizontal position with hinge pin vertical or in a vertical position with upward flow. 160 Wafer-type valves are not recommended for hazardous or flammable service or for temperatures greater than 260 C (500 F). 170 These items should be qualified for use in this specification in accordance with ASME B31.3, Paragraph Use cap screws for valves or flanges containing threaded holes. It is recommended that cap screws be supplied by valve supplier/manufacturer to ensure proper length for all threaded holes. REFERENCES: Process Industry Practices (PIP) PIP PNF Vents, Drains, and Instrument Connection Details PIP PNSMV023 - Stainless Steel Gate Valve Descriptions PIP PNSMV024 - Stainless Steel Globe Valve Descriptions PIP PNSMV025 - Stainless Steel Check Valve Descriptions PIP PNSMV026 - Stainless Steel Ball Valve Descriptions PIP PNSMV027 - Stainless Steel Butterfly Valve Descriptions Process Industry Practices Page 3 of 3
PIP PN03SA0S03 Piping Material Specification 3SA0S03 Class 300, 304/304L Stainless Steel, Socket Weld, C.A.-None, Low Temperature Process
February 2018 Piping PIP PN03SA0S03 Piping Material Specification 3SA0S03 Class 300, 304/304L Stainless Steel, Socket Weld, C.A.-None, Low Temperature Process PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES
More informationPIP PN03SV0S01 Piping Material Specification 3SV0S01 Class 300, Alloy 254 SMO (UNS S31254), Socket Weld, C.A. Process (PTFE Packing/Gaskets)
May 2016 Piping PIP PN03SV0S01 Piping Material Specification 3SV0S01 Class 300, Alloy 254 SMO (UNS S31254), Socket Weld, 0.000 C.A. Process (PTFE Packing/Gaskets) PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES
More informationProcess Industry Practices Pipeline Systems
September 2013 Process Industry Practices Pipeline Systems PIP PLX03CS5S01 Pipeline Systems, ASME B31.8 Material Specification Inside Production, Well Site Facility, Class 300, Carbon Steel, 0.03125" (1/32
More informationPIP PNSMV004 Carbon Steel Globe Valve Descriptions
February 2015 Piping PIP PNSMV004 Carbon Steel Globe Valve Descriptions PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice has
More informationPipeline Systems PIP PLSMV004 Carbon Steel Globe Valve Descriptions
November 2017 Pipeline Systems PIP PLSMV004 Carbon Steel Globe Valve Descriptions PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice
More informationHygienic Process Sample PIP PHCM0004 Hygienic Valve Commodity Codes Designator System
Hygienic Process Sample PIP PHCM0004 Hygienic Valve Commodity Codes Designator System PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this
More informationPIP PNE00012 Piping Examination and Leak Test Guide
October 2017 Piping PIP PNE00012 Piping Examination and Leak Test Guide PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice has
More informationPIP PNSMV037 Bronze and Iron Butterfly Valve Descriptions
October 2017 Piping PIP PNSMV037 Bronze and Iron Butterfly Valve Descriptions PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice
More informationWHEATLEY WHEATLEY SERIES 500 SWING CHECK VALVE. Installation, Operation and Maintenance Manual
WHEATLEY SERIES 500 SWING CHECK VALVE STANDARD INTEGRAL SEAT & OPTIONAL REMOVABLE SEAT 2" FP - 6" FP 150# - 1500# 8" FP - 12" FP 150# - 900# API 6D and B16.34 2" FP - 4" FP 5000# DRILLING PRODUCTION VALVE
More informationPipeline Systems PIP PLSC0019 Specification for Pressure Testing HDPE Plastic Pipeline Systems
November 2017 Pipeline Systems PIP PLSC0019 Specification for Pressure Testing HDPE Plastic Pipeline Systems PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry
More informationBall Float Steam Trap UNA 43 PN 16/CL 125/JIS 10K UNA 46 PN 40/CL 150/CL 300/JIS 10K/JIS 20K DN 80, 100, 150, 3", 4", 6"
Data Sheet 819584-00 Issue Date: 01/17 Ball Float Steam Trap UNA 43 PN 16/C 125/JIS 10K UNA 46 PN 40/C 150/C 300/JIS 10K/JIS 20K DN 80, 100, 150, 3", 4", 6" UNA 43 hl, UNA 46 hl UNA 43 v, UNA 46 v with
More informationASYBCO 90 O ELBOW LONG RADIUS O.D. I.D.
90 O ELBOW LONG RADIUS Standard weight Extra strong Schedule 160 Double extra strong ASTM A-234 ASME / ANSI B16.9 Carbon and ferritic alloy steel Produced from X-rayed, stress-relieve welded pipe. Welds
More informationWHEATLEY Series 500 Swing Check Valve
Document Number: TC003001-13 Revision: 02 WHEATLEY Series 500 Swing Check Valve Installation, Operation, and Maintenance Manual TABLE OF CONTENTS BILL OF MATERIALS...3 SCOPE...5 INSTALLATION AND OPERATION
More informationCERTIFICATION OF COMPLIANCE OF THE USER S DESIGN SPECIFICATION
CERTIFICATION OF COMPLIANCE OF THE USER S DESIGN SPECIFICATION I, the undersigned, being experienced and competent in the applicable field of design related to pressure vessel requirements relative to
More informationINTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS
INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS IAPMO GUIDE CRITERIA FOR WATER HEATER SUPPLY SHUTOFF VALVE WITH A / THERMAL EXPANSION CONTROL VALVE IGC 128-2006a8 1. PURPOSE 1.1 The purpose
More informationA soft sealed atmospheric safety valve with large flow capacity and soft seat tightness for steam condenser and turbine applications
SAPAG A soft sealed atmospheric safety valve with large flow capacity and soft seat tightness for steam condenser and turbine applications Features The Sapag Series 1100 steam safety valve is used for
More informationTHE HF-210 SERIES. Operating and Service Manual. Series includes all variants of HF-210/211. Issue A October 2014 *Section 6.
THE HF-210 SERIES Operating and Service Manual Series includes all variants of HF-210/211 Issue A October 2014 *Section 6.1 in development 1 TABLE OF CONTENTS 1. Description... 3 2. Installation... 3 3.
More informationCATALOGUE // The Fort Vale Range of Equipment to suit Hydrogen Peroxide Tank Specification. Fort Vale Engineering Ltd. 2009
CATALOGUE // 20 19 18 16 17 The Fort Vale Range of Equipment to suit Hydrogen Peroxide Tank Specification 15 14 Fort Vale Engineering Ltd. 2009 THIS PAGE IS INTENTIONALLY BLANK HYDROGEN PEROXIDE EQUIPMENT
More informationSerie 06-M6. Swing wafer check valve. made in. Application fields. Check valves E U R O P E WATER CONDITIONING INDUSTRY
Swing wafer check valve BRANDONI made in E U R O P E Application fields WATER CONDITIONING INDUSTRY HEATING 38 www.brandoni.it The valves in series 06 are swing wafer check valves, manufactured in accordance
More informationBall Float Steam Trap UNA 45 MAX, UNA 46 MAX, UNA 46A MAX PN 40/Class 300 DN 40, 50, 65
Data Sheet 819346-02 Issue Date: 05/17 Ball Float Steam Trap UNA 45 MAX, UNA 46 MAX, UNA 46A MAX PN 40/Class 300, 50, 65 UNA 45hl MAX, UNA 46hl MAX, UNA 46Ahl MAX UNA 45v MAX with cover for mounting electrode
More informationTHE PROCESS OF JOINT INTEGRITY
BOLTED JOINTS A.333 THE PROCESS OF JOINT INTEGRITY To assist in managing a process, ask yourself the following questions: why, what, who, and how? Why do we need a Flange Joint Integrity program? This
More information756 Safety Relief Valves
756 S a fe t y R e l i e f Va l ve s INTRODUCTION 756 Safety Relief Valves The effects of exceeding safe pressure levels in an unprotected pressure vessel or system, can have catastrophic effects on both
More informationPC3_ and PC4_ Pipeline Connectors
1283050/4 IM-P128-06 ST Issue 4 PC3_ and PC4_ Pipeline Connectors Installation and Maintenance Instructions 1. Safety information 2. Description PC30 shown 3. Installation 4. Welding of pipeline connector
More informationVERTICAL BLADDER TANK
Balanced Pressure Proportioning System Reliable Foam System Requiring Only Water Power Perfect For Tight Spaces UL Listed, ASME, National Board Registered Bladder-UL162 Approved, High Tensile Pressure
More informationModel MTB-ASME Vertical Bladder Tanks
DATA SHEET Model MTB-ASME Vertical Bladder Tanks Features n UL Listed for use with various proportioners and foam concentrates n 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
More informationHigh-Purity. Ball Valves
High-Purity s Components MANUFACTURING ASSEMBLY TESTING HP High-Purity s CFOS Applications Cost-effective systems where cleaning for oxygen-grade services are required, such as: Clean-Dry Air (CDA), Oil-Free
More informationModel MTB-ASME Vertical Bladder Tanks
DATA SHEET Model MTB-ASME Vertical Bladder Tanks Features n UL Listed for use with various proportioners and foam concentrates n 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
More informationAn example of systems that are inherently excellent applications for the cupronickel product are:
W&O Supply, founded in 1975, is the leading provider of marine piping solutions in the United States. W&O Supply, through its branch locations, distributes and provides services for valves, pipe, fittings,
More informationDUPLEX TECHNICAL INFORMATION FABRICATED DUPLEX STRAINERS
DUPLEX STRAINER TECHNICAL INFORMATION - 119 - SCREEN OPENINGS 100 Mesh - 30% O.A. 0.006 Openings 80 Mesh - 36% O.A. 0.008 Openings 60 Mesh - 38% O.A. 0.010 Openings 40 Mesh - 41% O.A. 0.016 Openings 30
More informationHORIZONTAL BLADDER TANK
Balanced Pressure Proportioning System Reliable Foam System Requiring Only Water Power Perfect For Low Ceilings UL Listed, ASME, National Board Registered Bladder-UL162 Approved, High Tensile Pressure
More informationMaterials : Forged carbon steel A105N
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 1/4" to 2 Female - Female BSP or NPT, Socket Welding - 29 C + 425 C Max Pressure : 136 Bars (Class 800) Specifications : With draining
More informationVertical Bladder Tanks
DATA SHEET Vertical Bladder Tanks Features UL Listed and FM Approved for use with various ANSUL proportioners and foam concentrates 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
More informationModel MTB-ASME Horizontal Bladder Tanks
DATA SHEET Model MTB-ASME Horizontal Bladder Tanks Features n UL Listed and FM Approved for use with various proportioners and foam concentrates n 175 psi (12.1 bar) maximum allowable working pressure
More informationTHE HF-300 SERIES. Operating and Service Manual. Series includes all variants of HF-300/301
THE HF-300 SERIES Operating and Service Manual Series includes all variants of HF-300/301 Issue A July 2015 1 TABLE OF CONTENTS 1. Description... 3 2. Installation... 3 3. Operation... 4 3.1. Spring Loaded...
More informationSolenoid valves, two-step on/off Type PMLX REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Solenoid valves, two-step on/off PMLX REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction........................................................................................3
More informationLOT DETAILS FOR
FLANGE, BLIND 600# PF&M 516-70N, AAD14 127 UNUSED 18 FLANGE, BLIND 8IN 600# PF&M 516-70N, BNK14 128 UNUSED 12 FLANGE, BLIND 6IN 600# PF&M 516.70N, AAA15 129 UNUSED 3 FLANGE, BLIND 600# PF&M 516.70N, E0A230
More informationSpeed control assembly model A-1
Pressure Regulation 533a 1. DESCRIPTION The Viking Speed Control Assembly provides adjustment of the opening speed of Viking Deluge Valves, and adjustment of both the opening and closing speed of Viking
More informationHorizontal Bladder Tanks
DATA SHEET Horizontal Bladder Tanks Features UL Listed and FM Approved for use with various ANSUL proportioners and foam concentrates 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
More informationINSTALLATION, MAINTENANCE & OPERATING INSTRUCTIONS 2-4 REDUCED PORT/ FULL PORT (5700/6700) ANSI CLASS 150/300/600/900/1500/2500 TRUNNION BALL VALVES
PBV-USA,Inc. 12735 Dairy Ashford. Stafford, Texas USA 77477 281-340-5400; 800-256-6193 FAX: 281-340-5499 INDUSTRIAL BALL VALVES IM0 69 April 2001 Rev 9 INSTALLATION, MAINTENANCE & OPERATING INSTRUCTIONS
More informationPTF4 Pivotrol Pump (patented) version Dual Mechanism - Pressure Powered Pump
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationVertical and Horizontal Bladder Tanks
DATA SHEET Vertical and Horizontal Tanks Application The ANSUL bladder tank is one component in a balanced pressure proportioning system. Its operation requires no external power other than a pressurized
More informationSeries 8R HIGH PERFORMANCE
Triac 8R Series s are the finest quality 3-piece valves on the market. The high quality investment castings feature a fully machined bore. The superior live-loaded packing system is accomplished with Belleville
More informationMaterials : Forged carbon steel A350 LF2
Size : Ends : Min Temperature : Max Temperature : DN 15 to 50 (NPS 1/2" to 2") Female - Female NPT, Socket Welding - 46 C + 425 C Max Pressure : 250 Bars (Class 1500) Specifications : Rising rotating stem
More informationPIPE, VALVE & FITTING
1. 2. 3. 4. Steel Pipe 1.1. Sch. 40 Black T&C 1.2. Sch. 40 Black PE 1.3. Sch. 80 Black PE 1.4. Sch. 40 Galvanized PE Threaded Steel Fittings 2.1. Sch. 40 Black Fittings 2.2. Sch. 80 Black Fittings 2.3.
More informationQuality Plastic Pipe Fittings. Technical Data. Fabricated PVC Fittings IPS Class 100, 125, 160, 200 SCH 40 & SCH 80 Solvent Weld & Gasketed
Quality Plastic Pipe Fittings Technical Data Fabricated PVC Fittings IPS Class 100, 125, 160, 200 SCH 40 & SCH 80 Solvent Weld & Gasketed Effective April 1, 2002 PIPE DIMENSIONS IPS-IRON PIPE SIZE Minimum
More informationIAPMO GUIDE CRITERIA FOR BALL VALVES IAPMO IGC PURPOSE
INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS IAPMO GUIDE CRITERIA FOR BALL VALVES IAPMO IGC 157-20067 1 PURPOSE 1.1 The purpose of this standard is to establish an acceptable standard
More informationMaterials : Carbon steel ASTM A216 WCB
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 400 ( NPS 2" to 16" ) Flanges R.F. Class 150 (PN20) - 29 C + 425 C Max Pressure : 20 Bars Specifications : Removable stainless
More informationGREIG FILTERS, INC. OPERATION MANUAL
GREIG FILTERS, INC. OPERATION MANUAL MODEL DCFH 3P 15/3 100 S4 DOE/222 DUAL CARTRIDGE FILTER HOUSING TABLE OF CONTENTS I. INTRODUCTION II. CARTRIDGE FILTER HOUSING UNIT A. OPERATION B. INSTALLATION C.
More informationInserta Products, Inc.
CODE 6 & 6 -BOLT SPLIT TYPE The INSERTA CODE 6 and CODE 6 -Bolt, Split Flange Type, Modular Connectors, are used in integrated hydraulic systems in place of welded and threaded pipe fittings. These are
More informationBALL VALVE ASSEMBLY AND MAINTENANCE PROCEDURE. REF. DOC.MMM900N Rev.1 March 2014 SERIES M DIN / ANSI. Page 1 of 17
SERIES M DIN / ANSI Page 1 of 17 REVIEW CONTROL PROCEDURE REF.DOC.MMM900N REV. DATE CARRIED OUT BY APPROVED BY DESCRIPTION 0 12/05/2013 E.Hidalgo J.Tejedor Initial Edition 1 27/03/2014 D.Grau J.Tejedor
More informationBALL VALVE ASSEMBLY AND MAINTENANCE PROCEDURE FOR LCV BALL VALVES REF. DOC. MMM LCVE Rev.0 July 2010 SERIES SFF & SFR.
SERIES SFF & SFR SFF / SFR EN/ANSI/ASME/API/BS/NF SFF EN/DIN/BS/NF Page 1 of 16 REVIEW CONTROL PROCEDURE REF.: DOC. MMM LCVE REV. DATE CARRIED OUT BY APPROVED BY DESCRIPTION 0 19/07/2010 J. Rubio J.Tejedor
More informationSample Cylinders and Accessories
Sample Cylinders and Accessories SC and MC Series FITOK Group FITOK GmbH (Headquarter) Sprendlinger Landstr. 115, 6069 Offenbach am Main, Germany Tel.: +49 69 8900 4498 Fax: +49 69 8900 4495 FITOK, Inc.
More informationFlange Bolt Torquing. for Resistoflex Plastic-Lined Piping Products. Torquing. Retorquing. Hydrotesting. Annual retorquing
Flange Bolt Torquing for Resistoflex Plastic-Lined Piping Products Torquing When assembling flange connections, always use a full complement of clean, new high strength A193-B7 bolting. If using stainless
More informationInstallation, Operation and Maintenance Manual for Back Pressure Regulator
Installation, Operation and Maintenance Manual for Back Pressure Regulator Model 8860 2009 Groth Corporation IOM-8860 Rev. B 12541 Ref. ID: 95565 Page 2 of 13 Table of Contents I. INTRODUCTION 3 II. DESIGN
More informationROTATING DISK VALVES INSTALLATION AND MAINTENANCE 1. SCOPE 3 2. INFORMATION ON USAGE 3 3. VALVE TYPES 3 4. OPERATORS 5 5. VALVE CONSTRUCTION 6
Sub Section INDEX Page Number 1. SCOPE 3 2. INFORMATION ON USAGE 3 3. VALVE TYPES 3 4. OPERATORS 5 5. VALVE CONSTRUCTION 6 6. INSTALLATION AND OPERATION 6 7. MAINTENANCE 8 8. REPAIR 9 9. ASSEMBLY 10 10.
More informationType 92S Pilot-Operated Steam Regulator
Type 92S Pilot-Operated Steam Regulator Introduction The Type 92S steam regulator is piston actuated for high cycle steam service which includes a Type 6492L, 6492H, or pilot (see Figure 1). These pilots
More informationTechnical data. Back pressure limit: 27.5% of set pressure. Capacity certification: ASME Boiler & Pressure Vessel Code Section I and VIII
VALVES & CONTROLS CROSBY SAFETY VALVES H ig h C a p a c it y, S t e a m S e r v ic e, F la n g e d S t e e l S a f e t y V a lv e Introduction Crosby Style HSL is a full nozzle reaction type safety valve
More informationCode 61 4-Bolt Flanges
INDUSRIES D. 730 Eaton ay, Annacis Business Park oll Free 1-800-928-1170 ebsite: www.sealum.com 4-Bolt s O Ring Boss National Pipe hread Socket eld Pipe Socket eld ube Butt eld Pipe Cover Plates Union
More information29 SERIES - SAFETY VALVE
INDUSTRIES, INC. 29 SERIES - SAFETY VALVE INSTALLATION, OPERATION, & MAINTENANCE Part I Document Number: ES1016-1 Revision Level: A Issued By: David Edmonds Date: 6/20/04 Approved By: Date: 10/4/04 Conbraco
More informationFisher 8532 High-Performance Butterfly Valve
Product Bulletin D101552X012 852 Valve Fisher 852 High-Performance Butterfly Valve The Fisher 852 high-performance butterfly valve (figure 1) provides outstanding performance under extreme pressure and
More informationHuat Siang Hardware Sdn. Bhd. Wire Mesh. Steel Sheet Piles. 1 of 33
Huat Siang Hardware Sdn. Bhd. Wire Mesh Steel Sheet Piles 1 of 33 2 of 33 Rails Purlins 3 of 33 4 of 33 Plates Plates 5 of 33 Hollow Sections HOLLOW SECTIONS SUPPLIER IN MALAYSIA - Huat Siang Hardware
More informationTelefon (+45) Telefax (+45)
Uni-Valve A /S VENTILER & INSTRUMENTER Telefon (+45) 43 43 82 00 Telefax (+45) 43 43 74 75 mail@uni-valve.com www.uni-valve.com UNI-S83 / S84 3/4-way ball valve Installation and Operating manual 3/4-WAY
More informationType ACE97. Introduction. Installation. P.E.D. Categories. Specifications. Overpressure Protection. Installation Guide English May 2002
Installation Guide English May 2002 Type ACE97 Introduction This installation guide provides instructions for installation, startup, and adjustment. To receive a copy of the instruction manual, contact
More informationBS Series Basket Strainer
BS Series Basket Strainer Operating, Installation, & Maintenance Manual Corrosion Resistant Fluid and Air Handling Systems. Dated 04-26-12 PRESSURE DROP SIMTECH strainers are engineered to offer the lowest
More informationCOMMITTEE DRAFT. API 520 Part I 10 th Edition Ballot Item 2.1. This ballot covers the following item:
This ballot covers the following item: API 520 Part I 10 th Edition Ballot Item 2.1 2008 12 Modify guidance to PRV datasheets (Line 17) to assist user s with determining the temperature to use for selecting
More informationNORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017
SECTION 33 1000 - WATER DISTRIBUTION PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationPilot Operated Safety Relief Valves
Pilot Operated Safety Relief Valves Engineering complete solutions Call Us on 01482 619600 The Company Four Key Divisions 1. Relief. Safety Relief. Pressure Reducing & Sustaining Valves. Broady Flow Control
More informationMSC Guidelines for Refrigeration Machinery
Procedure Number E1-32 Revision Date: 07/27/10 S. J. Kelly, CDR, Chief of Engineering Division References: a. 46 CFR Part 56.50-105 Low Temperature Piping b. 46 CFR Part 58.20 Refrigeration Machinery c.
More information776 Cryogenic Safety Valve
776 Cryogenic Safety Valve INTRODUCTION 776 Cryogenic Safety Valve The effects of exceeding safe pressure levels in an unprotected pressure vessel or system, can have catastrophic effects on both plant
More informationMODEL 200 KNIFE GATE VALVES INSTALLATION & MAINTENANCE MANUAL
MODEL 200 KNIFE GATE VALVES INSTALLATION & MAINTENANCE MANUAL Index 1. List of components / General arrangement 2. Description 3. Handling 4. Installation 5. Actuators / Operation 6. Maintenance a. Changing
More informationTHE MF-400 SERIES. Operating and Service Manual. Series includes all variants of MF-400/401
THE MF-400 SERIES Operating and Service Manual Series includes all variants of MF-400/401 Issue A October 2013 1 TABLE OF CONTENTS 1. Description... 3 2. Installation... 3 3. Operation... 4 4. Special
More informationPVC FASTTAP SADDLES for IPS Mains. Main Size OUTLET 1 FPT 3/4 CTS (7/8 OD) COMPRESSION 1 CTS (1 1/8 OD) COMPRESSION 3/4 IPS COMPRESSION
PVC FASTTAP SADDLES PVC FASTTAP SADDLES for IPS Mains THE ULTIMATE CONNECTION OUTLET 3/4 IPS FEMALE SLIP OR 1 IPS MALE SLIP SOLVENT WELD 1 IPS FEMALE SLIP SOLVENT WELD 3/4 MPT 1 MPT 3/4 FPT MAIN 13/16
More informationModels 461-S, 461-8S and S Regulators. R-1330 Rev. 7
Models 461-S, 461-8S and 461-12S Regulators R-1330 Rev. 7 461-S, 461-8S and 461-12S Regulators The Sensus Models 461-S, 461-8S and 461-12S are balanced valve, spring type regulators designed for distribution
More informationTechnical Data Sheet T 2025
Self-operated emperature Regulators emperature Regulator ype 4 Valve closes when the temperature rises. emperature Regulator ype 4u Valve opens when the temperature rises. Balanced single-seated globe
More informationConstant Pressure Crude Oil Container Model CPCCP
Installation, Operations, and Maintenance Manual Constant Pressure Crude Oil Container Model CPCCP The information in this manual has been carefully checked for accuracy and is intended to be used as a
More informationFlexible Metal Hose Products
Flexible Metal Hose Products Specialty Flexible Hose Solutions of Stainless Steel The AEROCOM Advantage Aerocom offers engineered solutions that address specific flexible piping challenges such as vibration,
More informationDual position solenoid valve Type ICSH 25-80
Data sheet Dual position solenoid valve Type ICSH 25-80 ICSH dual position solenoid valve belongs to the ICV family and consists of an ICV housing, an ICS insert together with an ICSH top cover with 2
More informationSABERINDO PACIF SABERINDO PACIFIC CIFIC SABERINDO PA. A Tyco International Company
CIF A Tyco International Company 1 Foam Concentrate CIF 3% AFFF -UL Listed -UL Canada Listed 6% AFFF 6 parts AFFF concentrate to 94 parts water -UL Listed- Foam Liquid -UL Canada Listed 3% FLUOROPROTEIN
More informationPILOT OPERATED RELIEF VALVE SAFETY PRODUCTS THAT PROTECT EQUIPMENT, LIVES & THE ENVIRONMENT
PILOT OPERATED RELIEF VALVE SAFETY PRODUCTS THAT PROTECT EQUIPMENT, LIVES & THE ENVIRONMENT Model Number Model Description Page # Pilot operated Relief Valves Pilot Operated Relief Valves 3-27 Operation
More informationMaterials : Forged carbon steel A105N
Size : Ends : Min Temperature : Max Temperature : DN 15 to 50 (NPS 1/2" to 2") Socket Welding -29 C + 425 C Max Pressure : 250 Bars (Class 1500) Specifications : Rising stem (OS&Y) Welded bonnet Full bore
More informationPRESSURE REGULATORS UPSTREAM DIFFERENTIAL PRESSURE. APPLICATION: For maintaining a constant differential pressure across meter.
PRESSURE REGULATORS UPSTREAM DIFFERENTIAL PRESSURE APPLICATION: For maintaining a constant differential pressure across meter. PRESSURE RANGE: Steel: 10 psig to 300 psig CAPACITY: Refer to Table of Contents.
More informationStorage Systems and Accessories
Storage Systems and Accessories High Pressure Air and Inert Gases 4500-6000 PSIG DOT and ASME Cylinders High Pressure Storage Systems If an application requires storage, either in the form of a single
More informationMSS STANDARD PRACTICE SP-61 This MSS Standard Practice was developed under the consensus of the MSS Technical Committee 114 and the MSS Coordinating C
MSS SP-61-2009 Pressure Testing of Valves Standard Practice Developed and Approved by the Manufacturers Standardization Society of the Valve and Fittings Industry, Inc. 127 Park Street, NE Vienna, Virginia
More informationPipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
More informationSAN ANTONIO WATER SYSTEM I.H. 10 Ground Storage Tank Rehabilitation and Painting Project SAWS Job No Solicitation No.
SAN ANTONIO WATER SYSTEM I.H. 10 Ground Storage Tank Rehabilitation and Painting Project SAWS Job No. 13-0118 Solicitation No. B-16-014-GC September 1, 2016 TO BIDDER OF RECORD: The following changes,
More informationSECTION DOMESTIC WATER PIPING
PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions Specification Sections, apply to this Section. B. Related Sections
More informationSEries 29 Hydrant valves installation, operation & maintenance manual
Instruction for use Thank you for selecting an AVK product. With correct use, it will give long and reliable service. This manual has been prepared to assist you install, operate and maintain the valve
More informationSUBMITTAL NOTES PROJECT: Ross Model 50RWR-A Pilot Operated Surge Relief Valve with Hydraulic Anticipation. Size: inch / mm
SUBMITTAL NOTES PROJECT: Ross Model 50RWR-A Pilot Operated Surge Relief Valve with Hydraulic Anticipation Size: inch / mm Every Ross Valve shall be hydrostatically tested for body integrity and tight seating
More informationAnderson Greenwood Series 93 Positive Pressure POSRV Installation and Maintenance Instructions
Before installation these instructions must be fully read and understood Installation and maintenance instructions for Series 93 Positive Pressure Pilot Operated Safety Relief Valves (POSRV). The intent
More informationSample C ylinde rs, Acce ssorie s, and O utage Tube s
www.swagelok.com Sample C ylinde rs, cce ssorie s, and O utage s Features Sizes from 10 to 3785 cm 3 (1 gal) Working pressures up to 5000 psig (344 bar) 304L and 316L stainless steel and alloy 400 2 Sample
More informationBronze Fittings & Flanges Brass Nipples
CORPORTE OFFICE TEL (800) 766-0076 LOCL (323) 890-4455 FX (323) 890-4456 WWW.SMITHCOOPER.COM ronze Fittings & Flanges rass Nipples 125 lb ronze Threaded Fittings 90 Elbow 1/8 36E 1001C 0.54 - - 0.078 50
More informationFLOAT OPERATED LEVEL CONTROLLER
PNEUMATIC LEVEL SWITCH NO RELAY APPLICATION: Liquid level controller for oil and gas separators, water knockouts, gas scrubbers and accumulators. FEATURES: Push-button dump valve override standard Float
More information-Proline Polypropylene Single Wall Piping
EFFECTIVE: 6/01/11 Industrial Piping Systems Dimensional Guide #PDIM Proline Super Proline Single Chemical Wall Grade Piping PVDF System -Proline Single Wall Piping s 3 r z s www.asahi-america.com Dimensions
More informationWelcome to the LESER Seminar, Taipei 28. June Design_of_safety_relief_valves_250804_Cal
Welcome to the LESER Seminar, Taipei 28. June 2006 1 Design of safety relief valves 2 Design of safety valves Target Classification of Pressure Relief Devices General design of Safety Relief valves 3 Design
More information(714) Irvine Pipe & Supply, Inc.
STEEL PIPE STEEL STEEL SCHEDULE 40 PIPE TYPE 316 STANDARD LENGTH: 20 (AVAILABLE IN 5 & 10 LENGTHS) SIZE 1/4 #SP62 3/8 #SP63 1/2 #SP65 3/4 #SP67 1 #SP610 1-1/4 #SP612 1-1/2 #SP615 2 #SP620 2-1/2 #SP625
More informationAPCO ARV CLEAN WATER AIR RELEASE VALVES. Model 50A
APCO ARV CLEAN WATER AIR RELEASE VALVES Model 50A Instruction D12013 February 2017 Instructions These instructions provide installation, operation and maintenance information for APCO ARV Clean Water Air
More informationJR Series. Gas Pressure Reducing Valve GAS PRESSURE REDUCING VALVE
JR Series Gas Pressure Reducing Valve GAS PRESSURE REDUCING VALVE The LowFlow JR Series line of high pressure regulators have the ability to handle very high pressures and very low flows. These valves
More informationMagnetic Level Gauges
Bulletin B 03 04 Magnetic Level Gauges Remote Reading Systems Magnetic Level Switches Magnetic level gauges OPERATING PRINCIPLE The operation of the magnetic level gauge is based on some elementary physical
More information299H Series. Introduction. P.E.D. Categories. Specifications. Installation. Warning. Installation Guide English September 2012
Installation Guide English September 2012 299H Series Introduction This Installation Guide provides instructions for installation, startup, and adjustment of 299H Series regulators. To receive a copy of
More informationNAVSEA STANDARD ITEM. 2.2 T9074-AS-GIB-010/271, Requirements for Nondestructive Testing Methods
NAVSEA STANDARD ITEM ITEM NO: 009-53 DATE: 29 JUL 2011 CATEGORY: II 1. SCOPE: 1.1 Title: Bolted Bonnet Steam Valve; repair (shop) 2. REFERENCES: 2.1 S9086-CJ-STM-010/CH-075, Fasteners 2.2 T9074-AS-GIB-010/271,
More information