PIP PN03SA0S03 Piping Material Specification 3SA0S03 Class 300, 304/304L Stainless Steel, Socket Weld, C.A.-None, Low Temperature Process
|
|
|
- Francis Vincent Gardner
- 5 years ago
- Views:
Transcription
1 February 2018 Piping PIP PN03SA0S03 Piping Material Specification 3SA0S03 Class 300, 304/304L Stainless Steel, Socket Weld, C.A.-None, Low Temperature Process
2 PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice has been prepared from the technical requirements in the existing standards of major industrial users, contractors, or standards organizations. By harmonizing these technical requirements into a single set of Practices, administrative, application, and engineering costs to both the purchaser and the manufacturer should be reduced. While this Practice is expected to incorporate the majority of requirements of most users, individual applications may involve requirements that will be appended to and take precedence over this Practice. Determinations concerning fitness for purpose and particular matters or application of the Practice to particular project or engineering situations should not be made solely on information contained in these materials. The use of trade names from time to time should not be viewed as an expression of preference but rather recognized as normal usage in the trade. Other brands having the same specifications are equally correct and may be substituted for those named. All Practices or guidelines are intended to be consistent with applicable laws and regulations including OSHA requirements. To the extent these Practices or guidelines should conflict with OSHA or other applicable laws or regulations, such laws or regulations must be followed. Consult an appropriate professional before applying or acting on any material contained in or suggested by the Practice. This Practice is subject to revision at any time. Process Industry Practices (PIP), Construction Industry Institute, The University of Texas at Austin, 3925 West Braker Lane (R4500), Austin, Texas PIP Member Companies and Subscribers may copy this Practice for their internal use. Changes or modifications of any kind are not permitted within any PIP Practice without the express written authorization of PIP. Authorized Users may attach addenda or overlays to clearly indicate modifications or exceptions to specific sections of PIP Practices. Authorized Users may provide their clients, suppliers and contractors with copies of the Practice solely for Authorized Users purposes. These purposes include but are not limited to the procurement process (e.g., as attachments to requests for quotation/ purchase orders or requests for proposals/contracts) and preparation and issue of design engineering deliverables for use on a specific project by Authorized User s client. PIP s copyright notices must be clearly indicated and unequivocally incorporated in documents where an Authorized User desires to provide any third party with copies of the Practice. PUBLISHING HISTORY January 2000 Issued February 2001 Technical Correction May 2016 Complete Revision April 2000 Revised October 2006 Complete Revision February 2018 Editorial Revision Not printed with State funds
3 SERVICE: Low Temperature Process (Note 04) MATERIAL: 304/304L Dual Marked RATING CLASS: 300, ASME B DESIGN CODE: ASME B TEMPERATURE LIMIT: -101 C to 200 C (-150 F to 400 F) (Note 09) STRESS RELIEF: None Required NOMINAL CORROSION ALLOWANCE: None EXAMINATION: Per ASME B31.3 PRESSURE - TEMPERATURE RATINGS METRIC UNITS For NPS 1/2 through NPS 12 (Full flange ratings per ASME B16.5, Table ) For NPS 14 through 24 see Note 01 TEMP ºC -101 to BAR PRESSURE - TEMPERATURE RATINGS US CUSTOMARY UNITS For NPS 1/2 through NPS 12 (Full flange ratings per ASME B16.5, Table II ) For NPS 14 through 24 see Note 01 TEMP ºF -150 to PSIG ITEM NOTES NPS SCH/RAT ENDS DESCRIPTION USER CODE PIPE 01, 23 1/2-1-1/2 40S SS, SMLS, ASTM A312-TP304/304L S SS, EFW, ASTM A312-TP304/304L (Ej=0.80) S SS, EFW, ASTM A312-TP304/304L (Ej=0.80) S SS, EFW, ASTM A312-TP304/304L (Ej=0.80) Calc SS, EFW, ASTM A312-TP304/304L (Ej=0.80) NIPPLES 03, 23 Branch 1/2-1-1/2 40S SS, SMLS, ASTM A312-TP304/304L Swage (CONC) 1/2-1-1/2 40S SS, ASTM A403-WP304/304L-S, MSS SP-95 Swage (ECC) 1/2-1-1/2 40S SS, ASTM A403-WP304/304L-S, MSS SP-95 FITTINGS 02 Sockolet 1/2-1-1/2 Class 3000 SW SS, ASTM A182-F304/304L, MSS SP-97 Thredolet 03 1/2-2 Class 3000 SW SS, ASTM A182-F304/304L, MSS SP-97 SW Latrolet 1/2-1-1/2 Class 3000 SW SS, ASTM A182-F304/304L, MSS SP-97 THRD Latrolet 03 1/2-2 Class 3000 SW SS, ASTM A182-F304/304L, MSS SP-97 SW Elbolet 170 1/2-1-1/2 Class 3000 SW SS, ASTM A182-F304/304L THRD Elbolet 03, 170 1/2-2 Class 3000 SW SS, ASTM A182-F304/304L 90 ELL 1/2-1-1/2 Class 3000 SW SS, ASTM A182-F304/304L, ASME B ELL 1/2-1-1/2 Class 3000 SW SS, ASTM A182-F304/304L, ASME B16.11 Tee 1/2-1-1/2 Class 3000 SW SS, ASTM A182-F304/304L, ASME B16.11 Tee (RED) 1/2-1-1/2 Class 3000 SW SS, ASTM A182-F304/304L, ASME B16.11 Plug 03 1/2-2 THRD SS, ASTM A182-F304/304L, round head, ASME B16.11 Plug 53 1/2-2 PE SS, ASTM A182-F304/304L, round head, ASME B16.11 Coupling 1/2-1-1/2 Class 3000 SW SS, ASTM A182-F304/304L, ASME B16.11 Coupling (RED) 1/2-1-1/2 Class 3000 SW SS, ASTM A182-F304/304L, ASME B16.11 Coupling 03 1/2-1-1/2 Class 3000 THRD SS, ASTM A182-F304/304L, ASME B16.11 Coupling (RED) 03 1/2-1-1/2 Class 3000 THRD SS, ASTM A182-F304/304L, ASME B16.11 Cap 1/2-1-1/2 Class 3000 SW SS, ASTM A182-F304/304L, ASME B16.11 Cap 03 1/2-1-1/2 Class 3000 THRD SS, ASTM A182-F304/304L, ASME B16.11 Reducing Insert 1/2-1-1/2 Class 3000 SW SS, ASTM A182-F304/304L, MSS SP-79 Union (GJ) 1/2-1-1/2 Class 3000 SW SS, ASTM A182-F304/304L, integral seat, MSS SP-83 Reducer (CONC) 2-24 Weld SS, ASTM A403-WP304/304L-W, ASME B16.9 Reducer (ECC) 2-24 Weld SS, ASTM A403-WP304/304L-W, ASME B16.9 BW Pipet Weld SS, ASTM A182-F304/304L, MSS SP LR ELL 2 24 Weld SS, ASTM A403-WP304/304L-W, ASME B LR ELL 2 24 Weld SS, ASTM A403-WP304/304L-W, ASME B16.9 Tee 2 24 Weld SS, ASTM A403-WP304/304L-W, ASME B16.9 Tee (RED) 2 24 Weld SS, ASTM A403-WP304/304L-W, ASME B16.9 Cap 2-24 Weld SS, ASTM A403-WP304/304L-S, ASME B16.9 Process Industry Practices Page 1 of 3
4 ITEM NOTES NPS SCH/RAT ENDS DESCRIPTION USER CODE VALVES Gate 1/2-2 Class 300 SW 316L SS body w/ Trim 12 GA03SU310 Gate 1/2-2 Class 800 SW 316/316L SS body w/ Trim 12 GA08SD310 Gate 06 1/2-2 Class 300 T/SW 316L SS body w/ Trim 12 GA03SU210 Gate 06 1/2-2 Class 800 T/SW 316/316L SS body w/ Trim 12 GA08SD210 Gate 1/2-24 Class 300 RF 316 SS body w/ Trim 12 GA03ST510 Globe 1/2-2 Class 300 SW 316L SS body w/ Trim 12 GL03SU310 Globe 1/2-2 Class 800 SW 316/316L SS body w/ Trim 12 GL08SD310 Globe 3-12 Class 300 RF 316 SS body w/ Trim 12 GL03ST510 Swing Check 62 1/2-2 Class 300 SW 316L SS body w/ Trim 10 CS03SU310 Swing Check 62 1/2-2 Class 800 SW 316/316L SS body w/ Trim 12 CS08SD310 Dual PLT Check 26, Class 300 RF 316 SS body w/ Trim 10 CD03ST510 Swing Check Class 300 RF 316 SS body w/ Trim 10 CS03ST510 Ball 09 1/2-2 Class 300 SW 316L SS body w/ 316 SS trim, R-PTFE ST BA03SU310 Ball Class 300 RF 316 SS body w/ 316 SS trim, R-PTFE ST BA03ST510 Ball 08, Class 300 RF 316 SS body w/ 316 SS trim, R-PTFE ST, FP BA03ST513 Ball Class 300 RF 316 SS body w/ 316 SS trim, R-PTFE ST, GO BA03ST511 Ball 08, Class 300 RF 316 SS body w/ 316 SS trim, R-PTFE ST, GO, FP BA03ST514 Ball Class 300 RF 316 SS body w/ 316 SS trim, R-PTFE ST, GO BA03ST512 Ball 08, Class 300 RF 316 SS body w/ 316 SS trim, R-PTFE ST, GO, FP BA03ST515 Ball 06, 09 1/2-2 Class 300 T/SW 316L SS body w/ 316 SS trim, R-PTFE ST BA03SU210 FLANGES 02 Socketweld 1/2-1-1/2 Class 300 RF SS, ASTM A182-F304/304L, ASME B16.5 Blind 1/2-24 Class 300 RF SS, ASTM A182-F304/304L, ASME B16.5 Weld Neck 2-24 Class 300 RF SS, ASTM A182-F304/304L, ASME B16.5 Pair WN Orifice 2-24 Class 300 RF SS, ASTM A182-F304/304L, ASME B16.36, SW taps GASKETS 1/2-24 Class 300 Spiral wound type 304 SS winding, w/ flexible graphite filler, w/ 304 SS inner ring and CS outer ring, ASME B16.20 BOLTING Stud Bolts ASTM A320, Gr B8 CL 2 stud, w/ 2 heavy hex nuts, ASTM A194, Gr 8 90 BRANCH CONNECTION Legend and Chart BRANCH SIZE 24 T 20 E T 18 E E T 16 E E E T 14 E E E E T 12 W E E E E T 10 W W E E E E T 8 W W W E E E E T 6 W W W W E E E E T 4 W W W W W W E E E T 3 W W W W W W W W E E T 2 W W W W W W W W W E E T 1½ S S S S S S S S S S S S T 1 S S S S S S S S S S S S E T 3/4 S S S S S S S S S S S S E E T 1/2 S S S S S S S S S S S S E E E T ½ 1 3/4 1/2 HEADER SIZE E Reducing Tee S Sockolet T Tee W BW Pipet Process Industry Practices Page 2 of 3
5 NOTES: 01 If a pipe schedule is shown under "SCH/RAT," it shall be adequate for the full flange rating. If "CALC" is shown, the pressure limit may be lower than full flange rating. 02 All butt-welded component thicknesses shall match the pipe thickness. 03 Threaded joints are permitted only at the outlet of vent and drain valves, hydrostatic connections, outlet instrument take-off valves, and to match equipment. 04 Requirements for low-temperature and cryogenic service shall be in accordance with ASME B31.3, Paragraph and Table These valves shall be used only for vent, drain, and instrument connections. 08 Full-port valves shall be used if indicated on the P&ID. 09 Pressure and temperature rating can be limited by certain components permitted by this Practice. Manufacturer's recommended pressure-temperature restrictions shall be consulted. 23 Sch 80S pipe and pipe nipples shall be used for threaded connections for sizes NPS 1/2 through NPS To be used only if indicated on the P&ID. 53 To be used where required for pipe supports, dummy legs and unused socketweld taps. 62 These check valves shall be installed in a horizontal position with cover up or in a vertical position with upward flow. 63 These check valves shall be installed in a horizontal position with hinge pin vertical or in a vertical position with upward flow. 170 These items should be qualified for use in this specification in accordance with ASME B31.3, Paragraph REFERENCES: Process Industry Practices (PIP) PIP PNF Vents, Drains, and Instrument Connection Details PIP PNSMV023 - Stainless Steel Gate Valve Descriptions PIP PNSMV024 - Stainless Steel Globe Valve Descriptions PIP PNSMV025 - Stainless Steel Check Valve Descriptions PIP PNSMV026 - Stainless Steel Ball Valve Descriptions Process Industry Practices Page 3 of 3
PIP PN03SA0S01 Piping Material Specification 3SA0S01 Class 300, 304/304L Stainless Steel, Socket Weld, C.A., Process
May 2016 Piping PIP PN03SA0S01 Piping Material Specification 3SA0S01 Class 300, 304/304L Stainless Steel, Socket Weld, 0.000 C.A., Process PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to
Process Industry Practices Pipeline Systems
September 2013 Process Industry Practices Pipeline Systems PIP PLX03CS5S01 Pipeline Systems, ASME B31.8 Material Specification Inside Production, Well Site Facility, Class 300, Carbon Steel, 0.03125" (1/32
PIP PN03SV0S01 Piping Material Specification 3SV0S01 Class 300, Alloy 254 SMO (UNS S31254), Socket Weld, C.A. Process (PTFE Packing/Gaskets)
May 2016 Piping PIP PN03SV0S01 Piping Material Specification 3SV0S01 Class 300, Alloy 254 SMO (UNS S31254), Socket Weld, 0.000 C.A. Process (PTFE Packing/Gaskets) PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES
PIP PNSMV004 Carbon Steel Globe Valve Descriptions
February 2015 Piping PIP PNSMV004 Carbon Steel Globe Valve Descriptions PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice has
Pipeline Systems PIP PLSMV004 Carbon Steel Globe Valve Descriptions
November 2017 Pipeline Systems PIP PLSMV004 Carbon Steel Globe Valve Descriptions PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice
PIP PNE00012 Piping Examination and Leak Test Guide
October 2017 Piping PIP PNE00012 Piping Examination and Leak Test Guide PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice has
Hygienic Process Sample PIP PHCM0004 Hygienic Valve Commodity Codes Designator System
Hygienic Process Sample PIP PHCM0004 Hygienic Valve Commodity Codes Designator System PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this
PIP PNSMV037 Bronze and Iron Butterfly Valve Descriptions
October 2017 Piping PIP PNSMV037 Bronze and Iron Butterfly Valve Descriptions PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice
Pipeline Systems PIP PLSC0019 Specification for Pressure Testing HDPE Plastic Pipeline Systems
November 2017 Pipeline Systems PIP PLSC0019 Specification for Pressure Testing HDPE Plastic Pipeline Systems PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry
CERTIFICATION OF COMPLIANCE OF THE USER S DESIGN SPECIFICATION
CERTIFICATION OF COMPLIANCE OF THE USER S DESIGN SPECIFICATION I, the undersigned, being experienced and competent in the applicable field of design related to pressure vessel requirements relative to
INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS
INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS IAPMO GUIDE CRITERIA FOR WATER HEATER SUPPLY SHUTOFF VALVE WITH A / THERMAL EXPANSION CONTROL VALVE IGC 128-2006a8 1. PURPOSE 1.1 The purpose
WHEATLEY WHEATLEY SERIES 500 SWING CHECK VALVE. Installation, Operation and Maintenance Manual
WHEATLEY SERIES 500 SWING CHECK VALVE STANDARD INTEGRAL SEAT & OPTIONAL REMOVABLE SEAT 2" FP - 6" FP 150# - 1500# 8" FP - 12" FP 150# - 900# API 6D and B16.34 2" FP - 4" FP 5000# DRILLING PRODUCTION VALVE
ASYBCO 90 O ELBOW LONG RADIUS O.D. I.D.
90 O ELBOW LONG RADIUS Standard weight Extra strong Schedule 160 Double extra strong ASTM A-234 ASME / ANSI B16.9 Carbon and ferritic alloy steel Produced from X-rayed, stress-relieve welded pipe. Welds
Ball Float Steam Trap UNA 43 PN 16/CL 125/JIS 10K UNA 46 PN 40/CL 150/CL 300/JIS 10K/JIS 20K DN 80, 100, 150, 3", 4", 6"
Data Sheet 819584-00 Issue Date: 01/17 Ball Float Steam Trap UNA 43 PN 16/C 125/JIS 10K UNA 46 PN 40/C 150/C 300/JIS 10K/JIS 20K DN 80, 100, 150, 3", 4", 6" UNA 43 hl, UNA 46 hl UNA 43 v, UNA 46 v with
A soft sealed atmospheric safety valve with large flow capacity and soft seat tightness for steam condenser and turbine applications
SAPAG A soft sealed atmospheric safety valve with large flow capacity and soft seat tightness for steam condenser and turbine applications Features The Sapag Series 1100 steam safety valve is used for
WHEATLEY Series 500 Swing Check Valve
Document Number: TC003001-13 Revision: 02 WHEATLEY Series 500 Swing Check Valve Installation, Operation, and Maintenance Manual TABLE OF CONTENTS BILL OF MATERIALS...3 SCOPE...5 INSTALLATION AND OPERATION
Ball Float Steam Trap UNA 45 MAX, UNA 46 MAX, UNA 46A MAX PN 40/Class 300 DN 40, 50, 65
Data Sheet 819346-02 Issue Date: 05/17 Ball Float Steam Trap UNA 45 MAX, UNA 46 MAX, UNA 46A MAX PN 40/Class 300, 50, 65 UNA 45hl MAX, UNA 46hl MAX, UNA 46Ahl MAX UNA 45v MAX with cover for mounting electrode
Speed control assembly model A-1
Pressure Regulation 533a 1. DESCRIPTION The Viking Speed Control Assembly provides adjustment of the opening speed of Viking Deluge Valves, and adjustment of both the opening and closing speed of Viking
An example of systems that are inherently excellent applications for the cupronickel product are:
W&O Supply, founded in 1975, is the leading provider of marine piping solutions in the United States. W&O Supply, through its branch locations, distributes and provides services for valves, pipe, fittings,
THE HF-210 SERIES. Operating and Service Manual. Series includes all variants of HF-210/211. Issue A October 2014 *Section 6.
THE HF-210 SERIES Operating and Service Manual Series includes all variants of HF-210/211 Issue A October 2014 *Section 6.1 in development 1 TABLE OF CONTENTS 1. Description... 3 2. Installation... 3 3.
THE PROCESS OF JOINT INTEGRITY
BOLTED JOINTS A.333 THE PROCESS OF JOINT INTEGRITY To assist in managing a process, ask yourself the following questions: why, what, who, and how? Why do we need a Flange Joint Integrity program? This
High-Purity. Ball Valves
High-Purity s Components MANUFACTURING ASSEMBLY TESTING HP High-Purity s CFOS Applications Cost-effective systems where cleaning for oxygen-grade services are required, such as: Clean-Dry Air (CDA), Oil-Free
Materials : Forged carbon steel A105N
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 1/4" to 2 Female - Female BSP or NPT, Socket Welding - 29 C + 425 C Max Pressure : 136 Bars (Class 800) Specifications : With draining
Series 8R HIGH PERFORMANCE
Triac 8R Series s are the finest quality 3-piece valves on the market. The high quality investment castings feature a fully machined bore. The superior live-loaded packing system is accomplished with Belleville
756 Safety Relief Valves
756 S a fe t y R e l i e f Va l ve s INTRODUCTION 756 Safety Relief Valves The effects of exceeding safe pressure levels in an unprotected pressure vessel or system, can have catastrophic effects on both
Materials : Carbon steel ASTM A216 WCB
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 400 ( NPS 2" to 16" ) Flanges R.F. Class 150 (PN20) - 29 C + 425 C Max Pressure : 20 Bars Specifications : Removable stainless
Flexible Metal Hose Products
Flexible Metal Hose Products Specialty Flexible Hose Solutions of Stainless Steel The AEROCOM Advantage Aerocom offers engineered solutions that address specific flexible piping challenges such as vibration,
LOT DETAILS FOR
FLANGE, BLIND 600# PF&M 516-70N, AAD14 127 UNUSED 18 FLANGE, BLIND 8IN 600# PF&M 516-70N, BNK14 128 UNUSED 12 FLANGE, BLIND 6IN 600# PF&M 516.70N, AAA15 129 UNUSED 3 FLANGE, BLIND 600# PF&M 516.70N, E0A230
PC3_ and PC4_ Pipeline Connectors
1283050/4 IM-P128-06 ST Issue 4 PC3_ and PC4_ Pipeline Connectors Installation and Maintenance Instructions 1. Safety information 2. Description PC30 shown 3. Installation 4. Welding of pipeline connector
CATALOGUE // The Fort Vale Range of Equipment to suit Hydrogen Peroxide Tank Specification. Fort Vale Engineering Ltd. 2009
CATALOGUE // 20 19 18 16 17 The Fort Vale Range of Equipment to suit Hydrogen Peroxide Tank Specification 15 14 Fort Vale Engineering Ltd. 2009 THIS PAGE IS INTENTIONALLY BLANK HYDROGEN PEROXIDE EQUIPMENT
Model MTB-ASME Vertical Bladder Tanks
DATA SHEET Model MTB-ASME Vertical Bladder Tanks Features n UL Listed for use with various proportioners and foam concentrates n 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
Model MTB-ASME Vertical Bladder Tanks
DATA SHEET Model MTB-ASME Vertical Bladder Tanks Features n UL Listed for use with various proportioners and foam concentrates n 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
PIPE, VALVE & FITTING
1. 2. 3. 4. Steel Pipe 1.1. Sch. 40 Black T&C 1.2. Sch. 40 Black PE 1.3. Sch. 80 Black PE 1.4. Sch. 40 Galvanized PE Threaded Steel Fittings 2.1. Sch. 40 Black Fittings 2.2. Sch. 80 Black Fittings 2.3.
Solenoid valves, two-step on/off Type PMLX REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Solenoid valves, two-step on/off PMLX REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction........................................................................................3
Materials : Forged carbon steel A350 LF2
Size : Ends : Min Temperature : Max Temperature : DN 15 to 50 (NPS 1/2" to 2") Female - Female NPT, Socket Welding - 46 C + 425 C Max Pressure : 250 Bars (Class 1500) Specifications : Rising rotating stem
Quality Plastic Pipe Fittings. Technical Data. Fabricated PVC Fittings IPS Class 100, 125, 160, 200 SCH 40 & SCH 80 Solvent Weld & Gasketed
Quality Plastic Pipe Fittings Technical Data Fabricated PVC Fittings IPS Class 100, 125, 160, 200 SCH 40 & SCH 80 Solvent Weld & Gasketed Effective April 1, 2002 PIPE DIMENSIONS IPS-IRON PIPE SIZE Minimum
IAPMO GUIDE CRITERIA FOR BALL VALVES IAPMO IGC PURPOSE
INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS IAPMO GUIDE CRITERIA FOR BALL VALVES IAPMO IGC 157-20067 1 PURPOSE 1.1 The purpose of this standard is to establish an acceptable standard
Code 61 4-Bolt Flanges
INDUSRIES D. 730 Eaton ay, Annacis Business Park oll Free 1-800-928-1170 ebsite: www.sealum.com 4-Bolt s O Ring Boss National Pipe hread Socket eld Pipe Socket eld ube Butt eld Pipe Cover Plates Union
DUPLEX TECHNICAL INFORMATION FABRICATED DUPLEX STRAINERS
DUPLEX STRAINER TECHNICAL INFORMATION - 119 - SCREEN OPENINGS 100 Mesh - 30% O.A. 0.006 Openings 80 Mesh - 36% O.A. 0.008 Openings 60 Mesh - 38% O.A. 0.010 Openings 40 Mesh - 41% O.A. 0.016 Openings 30
VERTICAL BLADDER TANK
Balanced Pressure Proportioning System Reliable Foam System Requiring Only Water Power Perfect For Tight Spaces UL Listed, ASME, National Board Registered Bladder-UL162 Approved, High Tensile Pressure
Vertical Bladder Tanks
DATA SHEET Vertical Bladder Tanks Features UL Listed and FM Approved for use with various ANSUL proportioners and foam concentrates 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
Model MTB-ASME Horizontal Bladder Tanks
DATA SHEET Model MTB-ASME Horizontal Bladder Tanks Features n UL Listed and FM Approved for use with various proportioners and foam concentrates n 175 psi (12.1 bar) maximum allowable working pressure
PVC FASTTAP SADDLES for IPS Mains. Main Size OUTLET 1 FPT 3/4 CTS (7/8 OD) COMPRESSION 1 CTS (1 1/8 OD) COMPRESSION 3/4 IPS COMPRESSION
PVC FASTTAP SADDLES PVC FASTTAP SADDLES for IPS Mains THE ULTIMATE CONNECTION OUTLET 3/4 IPS FEMALE SLIP OR 1 IPS MALE SLIP SOLVENT WELD 1 IPS FEMALE SLIP SOLVENT WELD 3/4 MPT 1 MPT 3/4 FPT MAIN 13/16
HORIZONTAL BLADDER TANK
Balanced Pressure Proportioning System Reliable Foam System Requiring Only Water Power Perfect For Low Ceilings UL Listed, ASME, National Board Registered Bladder-UL162 Approved, High Tensile Pressure
Storage Systems and Accessories
Storage Systems and Accessories High Pressure Air and Inert Gases 4500-6000 PSIG DOT and ASME Cylinders High Pressure Storage Systems If an application requires storage, either in the form of a single
Technical data. Back pressure limit: 27.5% of set pressure. Capacity certification: ASME Boiler & Pressure Vessel Code Section I and VIII
VALVES & CONTROLS CROSBY SAFETY VALVES H ig h C a p a c it y, S t e a m S e r v ic e, F la n g e d S t e e l S a f e t y V a lv e Introduction Crosby Style HSL is a full nozzle reaction type safety valve
v. Size shall be specified on drawings.
SPECIFICATION FOR VACUUM INSULATED PIPING Part 1 General 1. Submittals a. After award of contract and before executing any manufacturing, shop drawings and specifications shall be submitted to the customer
BALL VALVE ASSEMBLY AND MAINTENANCE PROCEDURE FOR LCV BALL VALVES REF. DOC. MMM LCVE Rev.0 July 2010 SERIES SFF & SFR.
SERIES SFF & SFR SFF / SFR EN/ANSI/ASME/API/BS/NF SFF EN/DIN/BS/NF Page 1 of 16 REVIEW CONTROL PROCEDURE REF.: DOC. MMM LCVE REV. DATE CARRIED OUT BY APPROVED BY DESCRIPTION 0 19/07/2010 J. Rubio J.Tejedor
BALL VALVE ASSEMBLY AND MAINTENANCE PROCEDURE. REF. DOC.MMM900N Rev.1 March 2014 SERIES M DIN / ANSI. Page 1 of 17
SERIES M DIN / ANSI Page 1 of 17 REVIEW CONTROL PROCEDURE REF.DOC.MMM900N REV. DATE CARRIED OUT BY APPROVED BY DESCRIPTION 0 12/05/2013 E.Hidalgo J.Tejedor Initial Edition 1 27/03/2014 D.Grau J.Tejedor
Telefon (+45) Telefax (+45)
Uni-Valve A /S VENTILER & INSTRUMENTER Telefon (+45) 43 43 82 00 Telefax (+45) 43 43 74 75 mail@uni-valve.com www.uni-valve.com UNI-S83 / S84 3/4-way ball valve Installation and Operating manual 3/4-WAY
776 Cryogenic Safety Valve
776 Cryogenic Safety Valve INTRODUCTION 776 Cryogenic Safety Valve The effects of exceeding safe pressure levels in an unprotected pressure vessel or system, can have catastrophic effects on both plant
29 SERIES - SAFETY VALVE
INDUSTRIES, INC. 29 SERIES - SAFETY VALVE INSTALLATION, OPERATION, & MAINTENANCE Part I Document Number: ES1016-1 Revision Level: A Issued By: David Edmonds Date: 6/20/04 Approved By: Date: 10/4/04 Conbraco
(714) Irvine Pipe & Supply, Inc.
STEEL PIPE STEEL STEEL SCHEDULE 40 PIPE TYPE 316 STANDARD LENGTH: 20 (AVAILABLE IN 5 & 10 LENGTHS) SIZE 1/4 #SP62 3/8 #SP63 1/2 #SP65 3/4 #SP67 1 #SP610 1-1/4 #SP612 1-1/2 #SP615 2 #SP620 2-1/2 #SP625
Sample Cylinders and Accessories
Sample Cylinders and Accessories SC and MC Series FITOK Group FITOK GmbH (Headquarter) Sprendlinger Landstr. 115, 6069 Offenbach am Main, Germany Tel.: +49 69 8900 4498 Fax: +49 69 8900 4495 FITOK, Inc.
Horizontal Bladder Tanks
DATA SHEET Horizontal Bladder Tanks Features UL Listed and FM Approved for use with various ANSUL proportioners and foam concentrates 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
PTF4 Pivotrol Pump (patented) version Dual Mechanism - Pressure Powered Pump
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
TECHNICAL DATA. Notes: For use with Trim Charts on Pages 2-4
Page 1 of 5 Telephone: 29-95-9501 Technical Services: 877-8-5 Fax: 29-8-0 Email: techsvcs@vikingcorp.com Model F Dry Valve with Trim Valve Size Part Number 17PTR 175PTR 17PTR Standard Trim Sets include
MSC Guidelines for Refrigeration Machinery
Procedure Number E1-32 Revision Date: 07/27/10 S. J. Kelly, CDR, Chief of Engineering Division References: a. 46 CFR Part 56.50-105 Low Temperature Piping b. 46 CFR Part 58.20 Refrigeration Machinery c.
Technical Data Sheet T 2025
Self-operated emperature Regulators emperature Regulator ype 4 Valve closes when the temperature rises. emperature Regulator ype 4u Valve opens when the temperature rises. Balanced single-seated globe
PIP RESP73H Application of ASME B Specification for Horizontal End Suction Centrifugal Pumps for Chemical Process
May 2018 Machinery PIP RESP73H Application of ASME B73.1-2012 Specification for Horizontal End Suction Centrifugal Pumps for Chemical Process PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort
MSS STANDARD PRACTICE SP-61 This MSS Standard Practice was developed under the consensus of the MSS Technical Committee 114 and the MSS Coordinating C
MSS SP-61-2009 Pressure Testing of Valves Standard Practice Developed and Approved by the Manufacturers Standardization Society of the Valve and Fittings Industry, Inc. 127 Park Street, NE Vienna, Virginia
Welcome to the LESER Seminar, Taipei 28. June Design_of_safety_relief_valves_250804_Cal
Welcome to the LESER Seminar, Taipei 28. June 2006 1 Design of safety relief valves 2 Design of safety valves Target Classification of Pressure Relief Devices General design of Safety Relief valves 3 Design
Type 92S Pilot-Operated Steam Regulator
Type 92S Pilot-Operated Steam Regulator Introduction The Type 92S steam regulator is piston actuated for high cycle steam service which includes a Type 6492L, 6492H, or pilot (see Figure 1). These pilots
Vertical and Horizontal Bladder Tanks
DATA SHEET Vertical and Horizontal Tanks Application The ANSUL bladder tank is one component in a balanced pressure proportioning system. Its operation requires no external power other than a pressurized
SAN ANTONIO WATER SYSTEM I.H. 10 Ground Storage Tank Rehabilitation and Painting Project SAWS Job No Solicitation No.
SAN ANTONIO WATER SYSTEM I.H. 10 Ground Storage Tank Rehabilitation and Painting Project SAWS Job No. 13-0118 Solicitation No. B-16-014-GC September 1, 2016 TO BIDDER OF RECORD: The following changes,
SECTION DOMESTIC WATER PIPING
PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions Specification Sections, apply to this Section. B. Related Sections
ROTATING DISK VALVES INSTALLATION AND MAINTENANCE 1. SCOPE 3 2. INFORMATION ON USAGE 3 3. VALVE TYPES 3 4. OPERATORS 5 5. VALVE CONSTRUCTION 6
Sub Section INDEX Page Number 1. SCOPE 3 2. INFORMATION ON USAGE 3 3. VALVE TYPES 3 4. OPERATORS 5 5. VALVE CONSTRUCTION 6 6. INSTALLATION AND OPERATION 6 7. MAINTENANCE 8 8. REPAIR 9 9. ASSEMBLY 10 10.
Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
NORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017
SECTION 33 1000 - WATER DISTRIBUTION PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
CL838 Series Twin Parallel Flow Service Regulators
CL838 Series Twin Parallel Flow Service Regulators The CL838 series regulators is a single valve body regulator with large twin diaphragm cases that are pilot loaded to insure a high degree of accuracy
299H Series. Introduction. P.E.D. Categories. Specifications. Installation. Warning. Installation Guide English September 2012
Installation Guide English September 2012 299H Series Introduction This Installation Guide provides instructions for installation, startup, and adjustment of 299H Series regulators. To receive a copy of
Flange Bolt Torquing. for Resistoflex Plastic-Lined Piping Products. Torquing. Retorquing. Hydrotesting. Annual retorquing
Flange Bolt Torquing for Resistoflex Plastic-Lined Piping Products Torquing When assembling flange connections, always use a full complement of clean, new high strength A193-B7 bolting. If using stainless
GREIG FILTERS, INC. OPERATION MANUAL
GREIG FILTERS, INC. OPERATION MANUAL MODEL DCFH 3P 15/3 100 S4 DOE/222 DUAL CARTRIDGE FILTER HOUSING TABLE OF CONTENTS I. INTRODUCTION II. CARTRIDGE FILTER HOUSING UNIT A. OPERATION B. INSTALLATION C.
WHEATLEY Series 822/820 Swing Check Valve
Document Number: TC003001-12 Revision: 02 WHEATLEY Series 822/820 Swing Check Valve Installation, Operation, and Maintenance Manual TABLE OF CONTENTS BILL OF MATERIALS...3 SCOPE...4 INSTALLATION AND OPERATION
PILOT OPERATED RELIEF VALVE SAFETY PRODUCTS THAT PROTECT EQUIPMENT, LIVES & THE ENVIRONMENT
PILOT OPERATED RELIEF VALVE SAFETY PRODUCTS THAT PROTECT EQUIPMENT, LIVES & THE ENVIRONMENT Model Number Model Description Page # Pilot operated Relief Valves Pilot Operated Relief Valves 3-27 Operation
WaterSource Heat Pump Hose Kit Performance Specification-Summary
WaterSource Heat Pump Hose Kit Performance Specification-Summary AUTOMATIC & MANUAL BALANCING HOSE KITS Contractor shall provide and install Hays Hose Kits. Each kit, shall include a Hays 2500 Series Mesurflo
PILOT OPERATED PRESSURE VACUUM RELIEF VALVE MODEL 1660
PILOT OPERATED PRESSURE VACUUM RELIEF VALVE MODEL 1660 Patent Protected Premium Seat Tightness to Set Pressure Snap or Modulating Valve Action Provides Ability to Meet Clean Air Act Requirements 600 TYPICAL
Steam Trap BK 15 (DN40, DN 50) Original Installation Instructions English
Steam Trap BK 15 (DN40, DN 50) EN English Original Installation Instructions 810682-03 1 Contents Page Important Notes Usage for the intended purpose... 4 Safety note... 4 Danger... 4 Attention... 4 Application
Pibiviesse High Performance Control Ball Valve
Pibiviesse High Performance Control Ball Valve Sizes 2 to 48 Pressure rating up to ANSI 2500# Anti-cavitation and low noise trim available High turndown High rangeability Unique self-cleaning effect Single
Sample C ylinde rs, Acce ssorie s, and O utage Tube s
www.swagelok.com Sample C ylinde rs, cce ssorie s, and O utage s Features Sizes from 10 to 3785 cm 3 (1 gal) Working pressures up to 5000 psig (344 bar) 304L and 316L stainless steel and alloy 400 2 Sample
Dual position solenoid valve Type ICSH 25-80
Data sheet Dual position solenoid valve Type ICSH 25-80 ICSH dual position solenoid valve belongs to the ICV family and consists of an ICV housing, an ICS insert together with an ICSH top cover with 2
Models 461-S, 461-8S and S Regulators. R-1330 Rev. 7
Models 461-S, 461-8S and 461-12S Regulators R-1330 Rev. 7 461-S, 461-8S and 461-12S Regulators The Sensus Models 461-S, 461-8S and 461-12S are balanced valve, spring type regulators designed for distribution
Huat Siang Hardware Sdn. Bhd. Wire Mesh. Steel Sheet Piles. 1 of 33
Huat Siang Hardware Sdn. Bhd. Wire Mesh Steel Sheet Piles 1 of 33 2 of 33 Rails Purlins 3 of 33 4 of 33 Plates Plates 5 of 33 Hollow Sections HOLLOW SECTIONS SUPPLIER IN MALAYSIA - Huat Siang Hardware
Self-operated Pressure Regulators for special applications
Self-operated Pressure Regulators for special applications Type 2357-31 Pressure Build-up Regulator with safety function and integrated excess pressure valve Application Pressure regulators for cryogenic
1 to 12 Full Bore Double Block & Bleed Pipeline Valves to a Standard ANSI B16.10 Length
FLEXIBILITY RELIABILITY Oliver Twinsafe Valves Ltd s comprehensive range of piping valves is designed to exceed the demands of today s international clients. The expertise of our design department together
Type ACE97. Introduction. Installation. P.E.D. Categories. Specifications. Overpressure Protection. Installation Guide English May 2002
Installation Guide English May 2002 Type ACE97 Introduction This installation guide provides instructions for installation, startup, and adjustment. To receive a copy of the instruction manual, contact
BERMAD Waterworks. Combination Air Valve. Air Valves Series. Typical Applications. Features & Benefits. Additional Features.
BERMA Waterworks Combination Air Valve Model C7 BERMA C7 is a high quality combination air valve for a variety of water networks and operating conditions. It evacuates air during pipeline filling, allows
SERIES SAFETY VALVE
R Manufactured by Conbraco Industries, Inc. 10-600 SERIES SAFETY VALVE INSTALLATION, OPERATION, & MAINTENANCE Part I Document Number: ES-1325 Revision Level: B Issued By: T.HAMILTON Date: 3/3/16 Approved
THE HF-300 SERIES. Operating and Service Manual. Series includes all variants of HF-300/301
THE HF-300 SERIES Operating and Service Manual Series includes all variants of HF-300/301 Issue A July 2015 1 TABLE OF CONTENTS 1. Description... 3 2. Installation... 3 3. Operation... 4 3.1. Spring Loaded...
Forged stainless steel ASTM A182 F316
MADE OF STAINLESS... Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 8 to 25 (NPS 1/4" to 1") Female - Female NPT - 29 C + 538 C Max Pressure : 138 Bars (Class 800) Specifications
INSTALLATION, MAINTENANCE & OPERATING INSTRUCTIONS 2-4 REDUCED PORT/ FULL PORT (5700/6700) ANSI CLASS 150/300/600/900/1500/2500 TRUNNION BALL VALVES
PBV-USA,Inc. 12735 Dairy Ashford. Stafford, Texas USA 77477 281-340-5400; 800-256-6193 FAX: 281-340-5499 INDUSTRIAL BALL VALVES IM0 69 April 2001 Rev 9 INSTALLATION, MAINTENANCE & OPERATING INSTRUCTIONS
ISO 9001:2000 Certifi ed Certifi cate No. C By-Pass Pigging Valves
ISO 9001:2000 Certifi ed Certifi cate No. C2007-01814 By-Pass Pigging Valves Carbon Steel - Alloy Steel - Stainless Steel Advantages over fabricated trap systems include: The simple design is easier to
SUBMITTAL NOTES PROJECT: Ross Model 50RWR-A Pilot Operated Surge Relief Valve with Hydraulic Anticipation. Size: inch / mm
SUBMITTAL NOTES PROJECT: Ross Model 50RWR-A Pilot Operated Surge Relief Valve with Hydraulic Anticipation Size: inch / mm Every Ross Valve shall be hydrostatically tested for body integrity and tight seating
Inserta Products, Inc.
CODE 6 & 6 -BOLT SPLIT TYPE The INSERTA CODE 6 and CODE 6 -Bolt, Split Flange Type, Modular Connectors, are used in integrated hydraulic systems in place of welded and threaded pipe fittings. These are
PRESSURE REGULATORS UPSTREAM DIFFERENTIAL PRESSURE. APPLICATION: For maintaining a constant differential pressure across meter.
PRESSURE REGULATORS UPSTREAM DIFFERENTIAL PRESSURE APPLICATION: For maintaining a constant differential pressure across meter. PRESSURE RANGE: Steel: 10 psig to 300 psig CAPACITY: Refer to Table of Contents.
Constant Pressure Crude Oil Container Model CPCCP
Installation, Operations, and Maintenance Manual Constant Pressure Crude Oil Container Model CPCCP The information in this manual has been carefully checked for accuracy and is intended to be used as a
Materials : Forged carbon steel A105N
Size : Ends : Min Temperature : Max Temperature : DN 15 to 50 (NPS 1/2" to 2") Socket Welding -29 C + 425 C Max Pressure : 250 Bars (Class 1500) Specifications : Rising stem (OS&Y) Welded bonnet Full bore
Serie 06-M6. Swing wafer check valve. made in. Application fields. Check valves E U R O P E WATER CONDITIONING INDUSTRY
Swing wafer check valve BRANDONI made in E U R O P E Application fields WATER CONDITIONING INDUSTRY HEATING 38 www.brandoni.it The valves in series 06 are swing wafer check valves, manufactured in accordance
2-step solenoid valve Type ICLX
Data sheet 2-step solenoid valve ICLX 32-150 ICLX 2-step solenoid valves belong to the ICV family. ICLX are used in suction lines to open against high differential pressure, e.g. after a hot gas defrost
2-step solenoid valve Type ICLX
Data sheet 2-step solenoid valve ICLX 32-150 ICLX 2-step solenoid valves belong to the ICV family. ICLX are used in suction lines for the opening against high differential pressure, e.g. after hot gas