-4.~1~ S L 0 T D I F F U S E R S
|
|
- Prosper Lindsey
- 5 years ago
- Views:
Transcription
1 \ I R DISTR I BUTION SPECIALIST -4.~~ S L 0 T D I F F U S E R S SLSD RLSD Supply Linear Slot Diffuser with hit & miss damper, and with deflectors. Return Linear Slot Diffuser with hit and miss damper, without deflectors. FAISAL JASSIM INDUSTRIES (L.L.C.) P 0. Box: 87 Dubai, U.A.E. Te: Fax: ~ flowtech@fjtco.com Website:
2 A I R D I S T R I B U T I O N S P E C I A L I S T APPLICATIONS FLOWTECH Linear Slot Diffuser (LSD) is a high capacity slot diffuser suited to a wide range of applications. With its pleasant aesthetic appearance it can be used in variety of prestigious locations such as Lobbies, Dinning Halls, Hotels, Palaces and Buildings Entrances where aesthetic is architecturally critical. For this purpose FLOWTECH LSD can be supplied in a straight or curved shape with a wide variety of powder coated colors. Functionally, Linear Slot Diffusers are used in large open areas where perimeter supply or return is required. For this purpose, FLOWTECH LSD is provided with unique curved design of air deflecting vanes which can be adjusted as required to achieve precise control of air flow direction. Usually directional control is required towards perimeter heat source or away from adjacent glass areas. With its steady performance at variable air flow rates, FLOWTECH LSD can be effectively used as part of VAV systems. For this purpose, FLOWTECH LSD can be combined with unitary plenum boxes of designer choice. FLOWTECH LSD can be used as supply air diffuser, return air diffuser or dummy ceiling diffuser for decorative purposes. Rev. 0:00/ E-
3 FLOW ~TECH AI R DISTRIBUTION SPECIALIST Supply Linear Slot Diffuser (SLSD) Product Features: Frame and curved deflection blades are made of extruded aluminum alloy 0 to T Heat Treatment. Available with Hit and Miss Damper of Gl sheet t o control air flow rate w ithout affecting the air flow patterns. I 80 fully adjustable air flow patterns by means of two air deflector blades per slot. Both Deflector Blades and Hit & Miss Damper are powder coated with black color. Available in I to 8 slots. and I " (mm). For maximum rigidity, profi les are fixed at equally spaced intervals using Screw Rods and cylindrical shims of mm dia, made of extruded aluminum Maximum one piece length is 0mm. Larger pieces are jointed using hairline butt joints held by special alignment strips to ensure continuous unbroken runs Curved Segments are available for both sidewall curves (CS) and ceiling curves (CP), with minimum radius of curvature of I OOOmm. Surface mount design Standard Slot Width is I /" ( mm), /4"(0mm) ~ A, ~ ~ B: Type SLSD-S with deflect ors with hit and miss dampers E- Rev. 0:00/ I
4 - If) If) FLOW -"-~TECH AIR D ISTRIBUTION SPECIALIST Standard Sizes: Standard Slot Size mm -- No. of I Slot Slot Slot 4 Slot Slot Slot Slots Neck Size A(mm) Flange Size B(mm) 7 Slot Slot 48 8 Standard Slot Size 0mm No. of I Slot Slot Slot 4 Slot Slot Slots Neck Size A(mm) Flange Size B(mm) Slot 0 7 Slot Slot 0 4 Standard Slot Size mm No. of Slots Neck Size A(mm) Flange Size B(mm) I Slot Slot Slot 4 Slot Slot Slot Slot Slot 77 B Ji~- Type SLSD-S with deflectors with hit & miss dampers (with 90deg end cap) Rev. 0:00/ I E-
5 FLOW~~ECH AIR DISTRIBUT I ON SPECIALIS T Available in powder coated RAL 900 or 90 as standerd color. Hit and miss damper are powder coated in black color as standard. Other powder coated finishes are available on request Plenum By Others w w ~ r ~ ~ ~ yy Ad'"""''''""' ~ ~ By Others ~ ~ ~ y y Y0 g Bndge Bracket By Others II ~ /_ Supportng Clamp False Celing _/ By Others ~ I ~.- li!hc:_.!!!'! ~-=.~ \()( ~ I ~ - Recommended Mounting of Linear Sloe Diffuser with a Plenum Box Spgot for flexible duct connection Ahgmng i Slot dffuser Mountin of Linear Slot Diffuser With a Plenum Box E-4 Rev. 0:00/ I
6 FLow~TEcH AIR D ISTRIBUTION SPECIALIST END CAP (EC) 0mmX0mm "L" shaped removable End Caps are supplied free with each full length to suit any LSD size. The end cap allows the extending or t he shortening of slot diffusers lines without replacing existing pieces. A mitred end cap is available upon request. I i~--~~ Corner Piece Ceiling Type (CPC) Available in any combination of X,Y &.. X Slot Diffuser with End Cap (EC) X (mm) Y (mm) l.(degree) can be of any angle between 4 and / ~ / y Ceiling Type Corner (CPC) Corner Piece Wall Type (CPW) mmxmm up to 00mmX 00mm Comer Pieces are available at 4 to angles for all standard slot sizes. Curved Slot Diffusers (CSD) Slot diffusers can be supplied with ceiling type curve to a minimum of I meter. Our Technician will assist in taking site measurments for special curvature. -- Wall Type Corner (CPW) --.A ' Curved Slot Diffuser (CSD) Mlred end cap lmear slot 0 user Rev. 0:00/ E-
7 A I R D I S T R I B U T I O N S P E C I A L I S T ACCESSORIES Plenum Boxes: Suitable for supply and exhaust linear slot diffuser. Galvanized steel construction. Supply as standard with one side inlet per metre length. Special constructions available on request. Option: Manual quadrant damper, code Q Sizes: Maximum length available 000mm Other Ø D available on request. V V H+0 H+0 ØD ØD Plenum boxes, code P Insulated plenum boxes, code PI mm Slots No. of Slots H Ø D V mm Slots No. of Slots H Ø D V mm Slots No. of Slots H Ø D V E- Rev. 0:00/
8 FLOW -~TECH AIR D ISTRIBUTION SPECIALIST DDDD-DD-DDDD-DDDD RAL Code Color Length in mm or inch No. of Slots SLSD Stands for SLSD model, -Slots, 00mm length and powder coated to RAL-90 color code. A ll igning strips are provided w it h each length of m. For Curved Segments, remark of curvature and plan of curvature shall be included in t he order. Our technicians are available, at your request, to take actual measurements On-Site without any extra charges. Rev. 0:00/ I E-7
9 A I R D I S T R I B U T I O N S P E C I A L I S T GENERAL NOTES Pages onwards give performance data for all models and variants, and unless otherwise stated the following general notes apply: Throws shown are to three terminal velocity of 0.m/s, 0.m/s, 0.7m/s, (0fpm, 00fpm, 0fpm) with coanda effect across a flat ceiling, and with supply air at conditions with max DT=0k cooling. For standard room height of.7 metres, throws should be taken as the distance to the nearest wall (minimum plan dimension, MPD), or to half the distance between linear slot diffuser centres. 4 Care should be taken to avoid 'dumping' on cooling cycles is low jet velocities at the diffuser core. In order to avoid this it is advisable to ensure that neck velocities do not drop below 0.7m/s. The accoustical data were tested in accordance to ASHRAE standards, the octave band sound power levels obtained were plotted to determine the point of tangency with the highest rank Noise Criteria curve (NC) to establish the NC. Noise Criteria ratings were determined by subtracting room absorption of 0dB from the sound power level data. NC, and Pressure values shown, are based on a slot diffuser where the pattern control vanes were set for maximum horizontal throw for one of the test and positioned fully open for the vertical throw test. The hit and miss damper is aligned for a fully open position. The damper should only be used for fine balancing, as for every doubling of pressure there is a resulting increase in the noise level of +9dB for supply, or +db for exhaust. 7 The following tables include the results of tests conducted on samples of air terminals. The test results include Noise Criteria (NC), static pressure versus air flow, throw and effective area. Extrapolation was used to obtain the performance for other sizes and other parameters within the range of products mentioned above. Test method included in ETL report. ETL TEST REPORTS E-8 Rev. 0:00/
10 A I R D I S T R I B U T I O N S P E C I A L I S T PERFORMANCE DATA - SI UNITS SYMBOLS L/Sec :Air volume in litres per second. Af :Effective free area in square meters / per Lm. Vf :Face velocity in meters per second. Ak :Neck area in square meters / per Lm. Vk :Neck velocity in meters per second. Pt :Total pressure in pascal. Th :Throw in meters. NC :Noise Criteria. NOTES The large throw values are based on the minimum terminal velocity of 0. m/sec. The middle throw values are based on the medium terminal velocity of 0.0 m/sec. The small throw values are based on the maximum terminal velocity of 0.7 m/sec. CONDITIONS Supply or Return as indicated. Noise Criteria values are based on (0 db) room attenuation. Damper is fully open. Maximum room height = 4.0m Maximum T = 0K Notes: Rev. 0:00/ E-9
11 See notes on page E-9 A I R D I S T R I B U T I O N S P E C I A L I S T SUPPLY AIR SLOT DIFFUSER - SLSD HORIZONTAL SI-UNITS mm SLOT WIDTH 0 mm SLOT WIDTH mm SLOT WIDTH NO. OF AIR FLOW SLOTS (L/s) / LM EFFECTIVE EFFECTIVE EFFECTIVE Pt (Pa) NC Pt (Pa) NC Pt (Pa) NC AREA (m/lm) (0./0.0/0.7)m/s AREA (m/lm) (0./0.0/0.7)m/s AREA (m/lm) (0./0.0/0.7)m/s < < < < Rev. 0:00/ E-0
12 See notes on page E-9 A I R D I S T R I B U T I O N S P E C I A L I S T SUPPLY AIR SLOT DIFFUSER - SLSD VERTICAL SI-UNITS mm 0 mm mm NO OF AIR FLOW EFFECTIVE AREA EFFECTIVE EFFECTIVE SLOTS (L/s/LM) Pt (Pa) Thow (m) NC Pt (Pa) Thow (m) NC Pt (Pa) Thow (m) NC (m/lm) AREA (m/lm) AREA (m/lm) < 4.9 < < <.9 < < <. < < < 4.9 < < < 4 4. < < < 4. < < < Rev. 0:00/ E-
13 A I R D I S T R I B U T I O N S P E C I A L I S T RETURN AIR SLOT DIFFUSER - RLSD SI-UNITS mm SLOT WIDTH 0mm SLOT WIDTH mm SLOT WIDTH NO. OF SLOTS AIR FLOW (L/s) / LM Pt (Pa) NC Pt (Pa) NC Pt (Pa) NC See notes on page E-9 E- Rev. 0:00/
14 A I R D I S T R I B U T I O N S P E C I A L I S T PERFORMANCE DATA - IP UNITS SYMBOLS CFM :Air volume in cubic feet per minute. Af :Effective free area in square feet / per L.Ft. Vf :Face velocity in feet per minute. Ak :Neck area in square feet / per L.Ft. Vk :Neck velocity in feet per minute. Pt :Total pressure in inches water gauge. Th :Throw in feet NC :Noise Criteria. NOTES The large throw values are based on the minimum terminal velocity of 0 fpm. The middle throw values are based on the medium terminal velocity of 00 fpm. The small throw values are based on the maximum terminal velocity of 0 fpm. CONDITIONS Supply or Return as indicated. Noise Criteria values are based on (0 db) room attenuation. Damper is fully open. Maximum room height = 4.0m Maximum T = 0K Notes: Rev. 0:00/ E-
15 See notes on page E- A I R D I S T R I B U T I O N S P E C I A L I S T SUPPLY AIR SLOT DIFFUSER - SLSD HORIZONTAL IP-UNITS / SLOT WIDTH /4 SLOT WIDTH SLOT WIDTH NO. OF AIR FLOW SLOTS (CFM/LFT) EFFECTIVE Pt EFFECTIVE EFFECTIVE Pt Pt AREA (inwg) Terminal Velocity (SQ.FT./LFT) Terminal Velocity (SQ.FT./LFT) Terminal Velocity (0/00/0) fpm NC AREA (0/00/0) fpm NC AREA (0/00/0) fpm NC (in-wg) (in-wg) (SQ.FT./LFT) < < < < Rev. 0:00/ E-4
16 A I R D I S T R I B U T I O N S P E C I A L I S T SUPPLY AIR SLOT DIFFUSER - SLSD VERTICAL IP-UNITS / /4 NO OF AIR FLOW SLOTS (CFM/LFT) EFFECTIVE AREA EFFECTIVE AREA EFFECTIVE AREA Pt (in-wg) Thow (ft) NC Pt (in-wg) Thow (ft) NC Pt (in-wg) Thow (ft) NC (SQ.FT./LFT) (SQ.FT./LFT) (SQ.FT./LFT) < 0.07 < < < 0.00 < < < < < < 0.0 < < < < < < < < < See notes on page E- Rev. 0:00/ E-
17 A I R D I S T R I B U T I O N S P E C I A L I S T RETURN AIR SLOT DIFFUSER - RLSD IP-UNITS NO. OF SLOTS AIR FLOW (CFM / LFT) / SLOT WIDTH /4 SLOT WIDTH SLOT WIDTH Pt (in-wg) NC Pt (in-wg) NC Pt (in-wg) NC See notes on page E- E- Rev. 0:00/
for Pleasant & Healthy Air-Distribution ISO 9001:2000 Linear Slot Diffusers Product Bulletin 133-D
for Pleasant & Healthy Air-Distribution ISO 9001:2000 Product Bulletin 133-D Linear Slot Diffusers Pleasant.. Serene.. YOU & DASCO... Since 1964 Partners for good health INTRODUCTION Linear slot diffusers
More informationHCD HIGH CAPACITY DRUM LOUVER
HIGH CAPACITY DRUM LOUVER The s (HCD) consist of extruded aluminum blades mounted inside a rotatable drum to produce long air throws with a high degree of directional control. Rotateable drum provides
More informationSupply air diffuser ROFB, RPFB
Supply air diffuser ROFB, RPFB ROFB and RPFB are supply air diffusers with an integrated plenum box for freely suspended installation in a ceiling. The diffuser ROFB comes with an unperforated and RPFB
More informationAdjustable swirl diffuser ODZA TECHNICAL DATA
Adjustable swirl diffuser ODZA TECHNICAL DATA 2 Adjustable swirl diffuser ODZA Adjustable ceiling swirl diffuser ODZA is intended for commercial and industrial buildings with a large room volume and high
More informationCEILING DIFFUSERS technical CONTROL THE AIR YOU BREATHE. types -CD, CAB. Europair Africa a division of Performancair Products Africa (Pty) Ltd
CEILING DIFFUSERS technical types -CD, CAB Europair Africa a division of Performancair Products Africa (Pty) Ltd tel +27 11 974 2425 fax +27 11 974 7251 web www.europair-africa.com email: info@europair-africa.com
More informationCLB 3 ATTRACTIVE JOINABLE LINEAR PROFILE EASILY ACCESIBLE VOLUME ADJUSTMENT INCLUDED FLEX CLAMP HEATING AND COOLING TERMINAL REHEAT AVAILABLE
CONSTANT VOLUME LINEAR BAR CEILING DIFFUSER CLB 3 ATTRACTIVE JOINABLE LINEAR PROFILE EASILY ACCESIBLE VOLUME ADJUSTMENT INCLUDED FLEX CLAMP HEATING AND COOLING TERMINAL REHEAT AVAILABLE CONTROL THE PERIMETER
More informationC O L M A N. Air Distribution SWIRL DIFFUSERS DRS SERIES DRS SERIES
C O L M N ir Distribution E N G I N E E R E D I R P R O D U C T S SWIRL DIFFUSERS DRS SERIES DRS SERIES D SERIES SWIRL DIFFUSERS pplication The DRS, DQS, DCS and DSS series of fixed circular swirl diffusers
More informationEXTRUDED ALUMINUM SQUARE AND RECTANGULAR DIFFUSERS
INDUSTRIAL REGISTRATION NO.353 EXTRUDED ALUMINUM SQUARE AND RECTANGULAR DIFFUSERS SQUARE AND RECTANGULAR FLUSH CEILING DIFFUSERS OUTSTANDING FEATURES: Extruded aluminum construction 1-2-3-4 way throw patterns.
More informationCHILLED BEAM FLEXICOOL IQID
CHILLED BEAM FLEXICOOL IQID TECHNICAL CATALOGUE 2 Flexicool IQID Chilled beam - Technical catalogue CHILLED BEAM FLEXICOOL IQID The chilled beam Flexicool IQID is an integrated system for ventilation,
More informationfor Asia / Pacific Radial outlet RA-N3... DS 4134 AUS /
for Asia / Pacific Radial outlet RA-N... DS AUS./ Radial outlet RA-N Preliary remarks KRANTZ KOMPONENTEN radial outlets of type RA-N have fixed radial vanes. They generate high-quality, diffuse supply
More informationvento specification sheet
type purpose application linear diffuser 18mm diffuser for air distribution for false ceiling the diffuser is used for the supply and exhaust of cooled or heated air in facilities such as offices, shopping
More informationGENERAL OVERVIEW GENERAL OVERVIEW
GENERAL OVERVIEW A GENERAL OVERVIEW Traditional HVAC systems in most commercial buildings today employ Overhead Mixing (Mixed Ventilation, MV) to meet both outdoor air ventilation and space conditioning
More informationRound duct nozzle jet diffuser Model DSA-RR
Round duct nozzle jet diffuser Model DSA-RR Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3
More informationPrecision Duct Systems 4570 Commerce Cir SW Atlanta, GA Phone (404)
Project Name: Engineer: Contractor: Section Number: Date Submitted: Date Approved: Pressure Class: Material Type: Connections: 2005 Up to 10 wg 1995 2 wg pos 1995 4 wg pos 1995 10 wg 2005 neg WG: 1995
More informationChilled beam iq Star WEGA II
Chilled beam iq Star WEGA II Key features Ventilation Water Heating and cooling Adjustable induction Flow Pattern Control In option: Demand Controlled Ventilation, Pressure independent, Electrical heating,
More informationLindabPremum. Supply air beam. lindab we simplify construction
lindab we simplify construction Lindab 03.2016 Lindab Ventilation. All forms of reproduction without written permission are forbidden. is the registered trademark of Lindab AB. Lindab's products, systems,
More informationTECHNICAL DESCRIPTION
TECHNICAL DESCRIPTION Exhaust Hose Reel ser. 865, electric motor driven No. 981118101 Description Limit switches, for hose coiling and uncoiling integrated in drive unit. Motor turns drum via a planetary
More informationLindabPremax. Supply air beam. lindab we simplify construction
lindab we simplify construction Lindab 03.2016 Lindab Ventilation. All forms of reproduction without written permission are forbidden. is the registered trademark of Lindab AB. Lindab's products, systems,
More informationCALMO
---------------------------------------------------- Sound attenuator with recessed connection for rectangular ducts ---------------------------------------------------------------------- GENERAL is, due
More informationCADENZA
---------------------------------------------- ---------------------------------------------------------------------- Attenuator with aerodynamically shaped splitters for rectangular ducts GENERAL has
More informationSizes JNŽ-6, ANŽ-3, ANŽ-4
JNŽ-6, ANŽ-3, ANŽ-4 Application are used in all kinds of low pressure air conditioning, air heating ind ventilation, where it is necesary to equalise the pressure between adjacent rooms. They can be applied
More informationKrantz Components. Multifunction Sail AVACS. Cooling and Heating Systems
Multifunction Sail AVACS Cooling and Heating Systems 2 AVACS Air Ventilation And Cooling System 3 System design Air diffuser box Air connection Sound absorbers (optional) Cooling element with heat conducting
More informationIP65 Air Differential Pressure Switch
Page 1 of 5 PA-DPS-9x IP65 Air Differential Pressure Switch Features: Benefits: Close switching differential IP65 Housing Duct fixing kit included Switching point easily adjusted with scale in One screw
More informationTechnical Documentation Linear diffusers series LDB
Technical Documentation Linear diffusers series 70435 Stuttgart, Grenzstraße 7, Germany Tel. +49 711 81-0, Fax +49 711 81-7 info@ltg-ag.de www.ltg-ag.com LTG Incorporated 105 Corporate Drive, Suite E Spartanburg
More informationSafidDampers. Class 1A & Class 1 Low Leakage Volume Control Damper ( Flange Type ) SPK Standard Construction. Description SPK
( Flange Type ) SPK 30 400 Standard Construction FRAME: 60mm x 30mm x.5mm (6 Ga.) galvanized steel formed channel for flange connection. BLADES: 00mm, 5mm and 50mm wide airfoil shaped blades extruded aluminum.
More informationAir Differentail Pressure Switch
Page 1 of 5 PA-DPS-8x Air Differentail Pressure Switch Features: Benefits: Close switching differential Duct fixing kit included Switching point easily adjusted with scale in Pascals Conduit entry can
More information- Written price quotations are valid for 30 days from the date of the quote unless otherwise noted.
SPECIFICATIONS - All material is solid brass with a #8 mirror finish unless otherwise noted. - All material sold by length is priced in one foot increments. ORDERING PROCEDURE - Use a Purchase Order number.
More informationOperating Instructions for Cobra and Lynx Duct Leakage Testers
Operating Instructions for Cobra and Lynx Duct Leakage Testers Table of Contents Introduction Introduction... 2 Safety Precautions Safety Precautions.. 2 Prior to Testing System Preparation.. 4 Power Requirements...
More informationLindabSolus. Supply air beam. lindab we simplify construction
lindab we simplify construction Lindab 03.2016 Lindab Ventilation. All forms of reproduction without written permission are forbidden. is the registered trademark of Lindab AB. Lindab's products, systems,
More informationGripping rotary modules
Gripping rotary modules Gripping rotary modules GRIPPING ROTARY MODULES Series Size Page Gripping rotary modules RP 314 RP 1212 318 RP 1216 322 RP 1520 326 RP 2120 330 RP 2128 334 RC 338 RC 1212 342 RC
More informationTABLE OF CONTENTS International Racquetball Federation officially approved specifications. Copyright 01/13/1983; rev.
Racquetball Court Specifications TABLE OF CONTENTS International Racquetball Federation officially approved specifications. Copyright 01/13/1983; rev. 1988; 1997, 2013 SECTION ONE: Performance and Specifications
More informationComponents for air preparation and pressure adjustment. OUT port position ( ) connected Rear side. of IN port. Air tank. directly.
Components preparation and pressure adjustment ABP Overview ABP is a component that enables boosting by s only up to twice primary pressure (.0MPa max.) in combination with using air tank but not using
More informationPro-Form Direct Vent System
The Pro-Form direct vent system has best in industry features that provide ease of installation, extreme durability and superior performance. The Pro-Form direct vent system is fully tested and listed
More informationLindabArchitect. Supply air beam
Lindab 01.2018 Lindab Ventilation. All forms of reproduction without written permission are forbidden. is the registered trademark of Lindab AB. Lindab's products, systems, product and product group designations
More informationEvolution. Radiant Panels. Radiant panel system LPHW up to 90 C Suspended ceiling grid or sofit mounting Vertical wall surface mounting
Evolution Radiant Panels Radiant panel system LPHW up to 90 C Suspended ceiling grid or sofit mounting Vertical wall surface mounting Contents IDENTIFICATION DESCRIPTION Page STYLE CG 3-7 STYLE CS, FC
More informationHVAC Air Duct Leakage. Tech University 2013 Presented By: Mark Terzigni Project Manager Technical Services SMACNA
HVAC Air Duct Leakage Tech University 2013 Presented By: Mark Terzigni Project Manager Technical Services SMACNA Learning Objectives Understand the difference between System leakage and Duct leakage Understand
More informationPressure decay sensor Pressure decay sensor Flow at 90 psi (6 bars) Tripping point at 90 psi (6 bar) supply Connection Mechanical life Relay C
Position Detectors Order/Technical Support Tel: (800) 6773 / FAX: (800) 677386 / www.crouzetusa.com / Pressure decay sensor Pressure decay sensor 8 04 02 Flow at 90 psi (6 bars) Tripping point at 90 psi
More informationAppendix A. Luminaire Schedule and Cutsheets
Appendix A Luminaire Schedule and Cutsheets Page 1 of 79 Tag Luminaire Manufacturer Description Catalog No. Mounting No. Alfa Gemini fully adjustable, directional track head with G26 bronze, mesh metal
More informationMANUAL. Verkstadsvagen 2, SE SKELLEFTEA, Sweden Tel , Fax P17W45_MPREX_F_EN
MANUAL Verkstadsvagen 2, SE 931 61 SKELLEFTEA, Sweden Tel. +46 910-361 80, Fax. +46 910-130 22 www.fumex.com info@fumex.se P17W45_MPREX_F_EN Contents Important information 3 Applications 3 Technical data
More informationAIR DIFFUSION INDUCTIVE MICRO-PERFORATED DUCTS
cop1 SISTEMI INNOVATIVI TRATTAMENTO ARIA AMBIENTE AIR DIFFUSION INDUCTIVE MICRO-PERFORATED DUCTS SELECTION CATALOGUE JULY 2012 EDITION INTRODUCTION The DLD air diffusion perforated ducts are born with
More informationBULLETIN FA-300. February 1999 AXIAD II. Adjustable Pitch Airfoil Axial Flow Fan
BULLETIN FA-300 February 1999 AXIAD II Adjustable Pitch Airfoil Axial Flow Fan AXIAD II The axial flow fan with: High efficiency Low sound level Adjustable pitch blades Complete range of accessories Axial
More informationK13.12 FACE FIXED PANIC EXIT DEVICE K13 DOORS
K13 DOORS K13.12 FACE FIXED PANIC EXIT DEVICE 01.03.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Base set n
More informationRamp Hand-railing System. Complies with Building Regulations. Lockinex. ea i, ea u i
Ramp Hand-railing System Complies with Building Regulations Lockinex ea i, ea u i INTRODUCTION COMPOSITION, MANUFACTURE Handrails to ramps must comply to current building regulations. The Lockinex system
More informationStatesville, NC. Results of AM ASHRAE 110 Laboratory Fume Hood Performance Evaluations Venturi Hood
Statesville, NC Results of AM ASHRAE 11 Laboratory Fume Hood Performance Evaluations Venturi Hood January, 217 Prepared By: Exposure Control Technologies Inc. 231-C East Johnson Street Cary, NC 27513 Phone:
More informationMechanical Wind Recorder
THE WORLD OF WEATHER DATA - THE WORLD OF WEATHER DATA - THE WORLD OF WEATHER DATA Instruction for Use 021186/11/06 Mechanical Wind Recorder 4.3900.20.000 ADOLF THIES GmbH & Co. KG Hauptstraße 76 37083
More informationAPPENDIX A SAMPLE FHT SPECIFICATION (This recommended FHT specification is available from
SAMPLE FHT SPECIFICATION (This recommended FHT specification is available from www.nebb.org) NEBB recommends that these FHT Specifications be referenced as related documents in other appropriate sections
More informationVA40 - VA45 Technical Datasheet
VA40 - VA45 Technical Datasheet Variable area flowmeter Local indication without auxiliary power Adaptable to meet customers' requirements Replaceable mounting parts KROHNE CONTENTS VA40 - VA45 1 Product
More informationUse of Correction Factors When Commissioning Air Systems
Shaun Matthews G5 Thesis 24 th January 2016 Rev. 2 Use of Correction Factors When Commissioning Air Systems S. Matthews Grade 5 Thesis - Use Of Correction Factors Rev. 2 1 of 12 Contents Introduction What
More informationChannel Bracket Support Cable Bracket Bearer Locking Pin Foundation Bolt Iron Anchor Step Manhole Sump Grill PVC/Steel Ladder Ladder Support & Hook
Manhole Accessories Channel Bracket Support Cable Bracket Bearer Locking Pin Foundation Bolt Iron Anchor Step Manhole Sump Grill PVC/Steel Ladder Ladder Support & Hook Manhole Guard Lifter Manhole Ventilator
More informationPressure Reducing Valve DMV 755 set range: 1,0-9,0 bar
Pressure Reducing Valve DMV 755 set range:,0-9,0 bar Advantage pressure setting possible at any time, also during operation high reproducibility of the set pressure high level of operating safety and long
More informationEDGE SERIES PRICE LIST. June 1st, 2017 Edition I1I
EDGE SERIES PRICE LIST June 1st, 2017 Edition I1I EDGE SERIES F R A M E L E S S PA N E L S Desk Dividers FEATURES Symmetry Office EDGE Series Panels offer the adaptability of the Terrace Panel without
More informationMini Channel & Fittings
Our mini channels and fittings provide for an economical method of supporting light load requirements on a strut system. Channel Channels are cold formed on our modern rolling mills from 18 Ga. (1.2 mm)
More informationFMU4X, FMC4X FMU4P, FMC4P
ENVIRONMENTALLY SOUND REFRIGERANT FMU4X, FMC4X FMU4P, FMC4P Product Specifications HORIZONTAL FAN COILS FMU4P and FMC4P 1 1/2, 2, 2 1/2, and 3 Tons FMU4X and FMC4X 1 1/2, 2 and 2 1/2 Tons ALL MODELS Horizontal
More informationCLEANROOM GEL GRID CEILING SYSTEM PRODUCT DATA Division
5023 HAZEL JONES ROAD, BOSSIER CITY, LA 71111 888.315.1561 800.877.8746 FAX SALES@GORDONCLEANROOM.COM GORDONCLEANROOM.COM AN EMPLOYEE OWNED COMPANY CLEANROOM GEL GRID CEILING SYSTEM PRODUCT DATA Division
More informationDigital Flow Switch. Series PFM7
Compatible with rgon (r), Carbon Dioxide (CO) and the Mixed Gas (r+co) Digital Flow witch eries PFM7 Flow adjustment valve Fluid r, CO r + CO RoH -color display ee abnormal values at a glance. llows flow
More informationPROVIDING QUALITY SOLUTIONS FOR THE AUDIOMETRIC INDUSTRY
PROVIDING QUALITY SOLUTIONS FOR THE AUDIOMETRIC INDUSTRY PRODUCT OPTIONS AMB Portable Series: Booths consist of 2 or 3 inch panels with integrated ventilation in the roof and floor. AMB 410: Consists
More informationRCP5W-RA Series. www. r o b o c y lind e r. d e. Dust-/Splash-/Water-proof RoboCylinder Rod Type with Battery-less Absolute Encoder
Product Data Sheets RCPW-RA RoboCylinder Brochure Extract GB Dust-/Splash-/Water-proof RoboCylinder Rod with Battery-less Absolute Encoder RCPW-RA Series www. r o b o c y lind e r. d e Specification Table
More informationGeneral Information Gravity roller conveyors are available in many sizes and configurations as shown on the following pages. There are many factors to consider when selecting a gravity conveyor. The following
More informationPressure reducing valves Index
Index General information page Introduction 506 General introduction 507 for a steam plant 509 Product information BSP thread page Brass 510 ; BSP female thread 511 ; BSP male thread 513 Stainless steel
More informationDESIGN OF AN EFFECTIVE LOW PRESSURE VAV AIR DISTRIBUTION SYSTEM
ABSTRACT The aim of this paper is to provide the air conditioning engineer with a clear set of guidelines for use in the design of the air distribution system for a low pressure Variable Air Volume system.
More informationPrintview: End and intermediate plate; 1 mm thick - Item No.:
Printview: End and intermediate plate; mm thick - Item No: 89-2 End and intermediate plate; mm thick Item No: 89-2 End and intermediate plate; mm thick Marking Business data Supplier WAGO Item no 89-2
More informationAir-service devices, Series MU1
Electric Drives and Controls Hydralics Linear Motion and Assembly Technologies Pneumatics Service Air-service devices, Series MU1 Technical data Pressure regulator valve, MU1, G 1 Technical Data Type Operating
More informationElectro Controls. Level WattsIndustries.co.uk
Electro Controls Level - 2017 WattsIndustries.co.uk levels Section 19 LIQUID LEVEL SWITCHES HORIZONTAL ELL.. Volt free contacts To monitor liquid level in tanks and switch pumps or an alarm in the event
More informationCLEAN-PROTECT Emergency Gas Release Absorber Models: CP500SF, CS1000SF
CLEAN-PROTECT Emergency Gas Release Absorber Models: CP500SF, CS1000SF Controlled product information. Intended use: technical reference for quotations and similar customer projects. Not intended for general
More informationSlide and Turn System SF35
Profile system Framed slide and turn system Non-thermally insulated aluminum profiles with insulated glass Option of flush or weathered bottom track The flush bottom track is particularly suitable for
More informationEZ SERIES FIXED ACCESS LADDERS
EZ SERIES FIXED ACCESS LADDERS Engineered from the ground up for OSHA 1910.3 COMPLIANCE Installs in three easy steps 1 ATTACH MOUNTING BRACKETS PLACE RUNG IN BRACKET 3 SECURE WITH BOLTON CAPTURE PLATE
More informationParts Manual. Scraper Hitches PH:
Parts Manual Scraper Hitches 12-18 1 Table of Contents A123299 Swivel Hitch 3 A1063527 Super Swivel Hitch 4 A125056 Yoke Hitch 5 A125057 Super Capacity Hitch 6 A125223 MDU Hitch 7 A123224 360 Swivel Hitch
More informationE 094 E 103 E 143 Tank top mounting Connection up to G1 / -16 SAE Nominal flow rate up to 135 l/min / 35.7 gpm
Return Filters E 9 E E Tank top mounting Connection up to G / -6 SAE Nominal flow rate up to 5 l/min / 5.7 gpm Description Application In the return line circuits of hydraulic systems. Performance features
More informationRolled Rotary Ball Screw
51E Rolled Rotary Ball Screw Model BLR End cap Collar Seal Spacer Ball End cap Screw shaft Outer ring Ball screw nut Retainer Outer ring Ball Fig.1 Structure of Large Lead Rotary Nut Ball Screw Model BLR
More informationExtension Platform. Base Platform. Crossover. Exit railing. Exit Railing
Base Platform Galvanized With metal grate and two brackets Railing on the long side and a face side Extension Platform Galvanized With metal grate and one bracket Railing on the long side with rail connection
More informationDICTATOR Spring Rope Pulleys for the Closing of Sliding Doors
DICTATOR for the Closing of Sliding Doors Spring rope pulleys are a simple, efficient and cost-effective closing device for sliding doors. During the opening of the door the internal spring is tensioned
More informationAuto Feed Lube, Auto Feed Tank ALF400 to 900, ALT-5/-9
Auto Feed Lube, Auto Feed Tank 00 to 900, -/-9 Standard Specifications Fluid Proof pressure Operating pressure differential range (Difference between tank pressure and line pressure) Vibration resistance
More informationA17W23_MASE_MUS_EN MANUAL
A1W2_MASE_MUS_EN MANUAL CONTENTS 1 Identification 1.1 Manufacturer 1.2 Product name 1. Year of manufacture 1. Area of use 2 Technical specification 2.1 Design 2.2 Function 2. Technical data 2. Security
More informationIntegral type Differential pressure flowmeter VNT Series
Integral type Differential pressure flowmeter VNT Series OUTLINE VH series Wafer-Cone differential pressure flowmeter and high precision differential pressure transmitter are integrated into one flowmeter.
More informationFlow VA 520. incl. temperature measurement. Intelligent solutions for ac- for compressed air and gases R 1/4 (DN 8) DN 15 R 3/4 (DN 20) DN 25
VA 520 incl. temperature R 1/4 (DN 8) DN 15 R 3/4 (DN 20) DN 25 R 1 1/4 (DN 32) DN 40 R 2 (DN 50) Intelligent solutions for ac- for compressed air and gases work according to the approved calorimetric
More informationFlow VA 520. incl. temperature measurement. Intelligent solutions for ac- for compressed air and gases R 1/4 (DN 8) DN 15 R 3/4 (DN 20) DN 25
VA 520 incl. temperature R 1/4 (DN 8) DN 15 R 3/4 (DN 20) DN 25 R 1 1/4 (DN 32) DN 40 R 2 (DN 50) Intelligent solutions for ac- for compressed air and gases work according to the approved calorimetric
More information2-Port Seat Valves with Flange, PN 16
4 45 2-Port Seat Valves with Flange, PN 6 VVF45... dular cast iron EN-GJS-400-5 valve body DN 50...50 k vs 9...00 m /h Can be equipped with SKB...- or SKC...- electrohydraulic actuators Use For use in
More informationMultiWoody design Mario Cucinella
design Mario Cucinella 9000 7000 5000 MaxiWoody ø 260 MaxiWoody ø 315 MaxiWoody ø 380 www.iguzzini.com 473 Compositions Flanges and supports for 2 floodligts single flange double flange for 3 floodligts
More informationOwner s Manual Installation and Operation
Owner s Manual Installation and Operation Models: RED40-N-AU RED40ST-N-AU Ref No: GMK10107 AS4553:2008 Important operating and maintenance instructions included. NOTICE DO NOT DISCARD THIS MANUAL Read,
More informationAutomatic extractor outlet
L-07-2-01e Automatic extractor outlet Type HFA Contents Application Realisation Operation Safety instructions Contents Application Realisation Operation Safety instructions 2 Connection diagram Dimensions
More informationLimit switches OsiSense XC Special For material handling applications, type XC1 AC
Presentation For material handling applications, type XC C b XC C with slow break contacts v With head for linear movement () 00_ 00_ 000_ Page / 00_ 00_ XCC XCC Page / XCC XCC / General characteristics
More informationATHLETICS Track & Field Equipment
ATHLETICS Track & Field Equipment Aluminium Curbing Order No. 11260 The aluminium curbing is made from special made anodized aluminium profiles. It is a mobile marker and separator of the running track.
More informationPressure Reducing Valve DMV 755
Pressure Reducing Valve DMV 755 Nominal size DN 10 50 Nominal size 3/8 2 Nominal pressure PN 10 bar Features pressure setting range 1 to 9 bar control valve for reliable reduction of system pressures to
More informationSizing of extraction ventilation system and air leakage calculations for SR99 tunnel fire scenarios
Sizing of extraction ventilation system and air leakage calculations for SR99 tunnel fire scenarios Yunlong (Jason) Liu, PhD, PE HNTB Corporation Sean Cassady, FPE HNTB Corporation Abstract Extraction
More informationCentriflow Plus High-pressure plug fan - Technical Data
Centriflow Plus 3 High-pressure plug fan - Technical Data Contents General description...3 General survey chart...4 Design description Fan Impeller...5 Fan Inlet...5 base with base frame...5 Hub...5 Air
More informationREPORT NUMBER: G COQ-004 rev 1 ORIGINAL ISSUE DATE: May 18, 2010 REVISION DATE: June 7, 2010
TEST REPORT REPORT NUMBER: G100017878COQ-004 rev 1 ORIGINAL ISSUE DATE: May 18, 2010 REVISION DATE: June 7, 2010 EVALUATION CENTER Intertek Testing Services NA Ltd. 1500 Brigantine Drive Coquitlam, B.C.
More informationFinvector Perimeter Heating
Finvector Perimeter Heating Products that perform... By people who care Identification Contents Page Identification 2 Introduction 2 Authority 2 Description 3-6 Range 2 Casings 3 Elements 3 Introduction
More informationVISUAL AIDS FOR DENOTING OBSTACLES
CHAPTER 6. VISUAL AIDS FOR DENOTING OBSTACLES 6.1 Objects to be marked and/or lighted Note. The marking and/or lighting of obstacles is intended to reduce hazards to aircraft by indicating the presence
More informationARCA cabinet NEW. High performance polycarbonate cabinet. Protection in demanding environments
ARCA cabinet NEW High performance polycarbonate cabinet Protection in demanding environments NEW Fibox ARCA Fibox ARCA non corrosive electrical cabinets for use in extremely harsh and demanding environments
More information2-Port Seat Valves with Flange, PN 16
4 40 2-Port Seat Valves with Flange, PN 6 VVF4... Grey cast iron EN-GJL-250 valve body DN 50...50 k vs 9...00 m /h Can be equipped with SQX- electromotoric or SKD...-, SKB...- or SKC...- electrohydraulic
More informationLiquid level instruments BM 24 /BM 51
KROHNE 09/2001 7.02362.21.00 GR/PRINTO Liquid level instruments / Status: 10/99 Variable area flowmeters Vortex flowmeters Flow controllers Electromagnetic flowmeters Ultrasonic flowmeters Mass flowmeters
More informationArmatures for analytical probes
Armatures for analytical probes For many different types of installations and applications Large range of probe holders General purpose, water treatment, food & beverage, pharmaceutical applications Type
More informationCompact pressure switches for gas and air
Compact pressure es for gas and air / 5.0 Printed in Germany Edition 0.8 Nr. 9 544 6 Technical description The pressure is an adjustable compact pressure according to EN 854 for combustion plants. The
More informationBarcol-Air BRM Radiant Module
Barcol-Air BRM Radiant Module General The high capacity Radiant Cooling Module BRM is based on the principles of the radiant cooling technology. Due to the purpose designed profile and the geometry of
More informationInstallation and Operation Manual
Manual Static pressure transducer with controller Differential static pressure transducer with analog output and optional PI control mode Large diaphragm element with differential transformer Transducer
More informationMott Manufacturing Limited
Mott Manufacturing Limited 452 Hardy Road, Brantford, Ontario, Canada, N3T 5L8. Telephone: 519-752-7825 Fax: 519-752-2895 Web Site: www.mott.ca Fume Hood Performance Test Test Date: 9-Sep-08 Model Number:
More informationM2 Antenna Systems, Inc. Model No: VLP16
M2 Antenna Systems, Inc. Model No: 100-600VLP16 SPECIFICATIONS: Model... 100-600VLP16 Frequency Range... 100-600 MHz Cont. *Gain... 9.64 dbi Front to back... 12 db Typical Beamwidth... E=64 / H=70 Feed
More informationDatasheet liniled Handrail 42.4 V1017 IK10. F RoHS FROST CLEANING AGENTS RESISTANT UV RESISTANT
Datasheet liniled Handrail 42.4 V1017 F RoHS IP40 IP68 IK10 AISI 316 UV RESISTANT FROST CLEANING AGENTS RESISTANT Handrail 42.4 Product information Technical specifications Product specifcations Required
More informationMEDAP-MOBILE GAS SUPPLY
MEDAP-MOBILE GAS SUPPLY This document is intended to provide information to an international audience outside of the US. MOBILE GAS SUPPLY 3 MOBILE GAS SUPPLY FOR TRANSPORTATION AND WARD PRESSURE REGULATORS,
More informationLayout Guidelines. Overview
TECHNICA RESOURCES ayout Guidelines Included are the design layout guidelines for evaporative cooling products in several situations typically encountered by designers. These guidelines represent minimum
More information