CPHS High School Technical Theater
|
|
|
- Mitchell Baker
- 5 years ago
- Views:
Transcription
1 CPHS High School Technical Theater Safety Rules and Regulations The important rules that everyone must follow when working on the stage or in the shop areas.
2 Good News and Quote of the Day
3 Housekeeping Collecting Fees/Safety Packet Turn in Handbook Signatures Crew Hour Sheets Syllabus located under under the link Class Information Must attend one show per sem.
4 How to Get your Hours Today Need Posters Created for PNG Shows. Will comp for two hours worth of time. Must be excellent work and creative design! Ask Mrs. Blake if she needs any help.
5 Daily Objective Demonstrate knowledge of technical theatre safety in the classroom. Create Safety Posters as a demonstration of this knowledge. Test knowledge of theatre safety in the classroom through classroom Jeopardy.
6 Warm-Up 25 minutes In groups of two you will create a Theatre Safety Poster or Advertisement based on an assigned section from the CPHS Theatre Safety Manual. Create Images or pictures of examples of what to do/what not to do. Try and get creative with your posters so people will want to look at them. You will teach your assigned section and present your poster to the class when finished.
7
8
9
10 Poster Examples
11 Safety Rules and Regulations The following power point is a list of rules and regulations that each student must practice on the CPHS stage and shop areas. In order for a student to take part in the many hands-on activities that we will be doing, he/she must pass with an 90 or higher on the written safety test. This is the information is what you must know to pass.
12 Leading Causes of Accidents Insufficient knowledge Improper use of tools and facilities Failure to safeguard hazardous equipment Failure to remove faulty equipment Carelessness Taking unnecessary risks Being in a hurry
13 The Most Dangerous Part of Production The most dangerous time of a production is the strike when the show is over and the technical elements are dismantled and stored. This time of exhilaration and exhaustion warrants a greater degree of attention and vigilance than any other period in the course of the production.
14 NOT PERMITTED! Running, practical jokes, throwing tools or materials, jumping from one level to another, or any other dangerous activity is not permitted.
15 Safety Rules and Regulations 1. Keep the workshop clean and tidy at all times.
16 Safety Rules and Regulations 2. Make sure work areas are clear and safe for work to be done.
17 Safety Rules and Regulations 3. Always seek instruction before using an unfamiliar piece of equipment.
18 Safety Rules and Regulations 4. Only use tools and machines for their intended purpose.
19 Safety Rules and Regulations 5. Report all damaged equipment and do not use it until it is repaired.
20 Safety Rules and Regulations 6. Do not remove, alter, or disable any guard or safety devices on any power tool.
21 Safety Rules and Regulations 7. Never distract the attention of another staff member when a person is operating equipment.
22 Safety Rules and Regulations 8. NEVER indulge in horseplay.
23 Safety Rules and Regulations 9. Report all hazards and unsafe conditions and work practices to the Technical Director.
24 Safety Rules and Regulations 10. You may not use a piece of equipment until you have been checked out on that piece of equipment.
25 Safety Rules and Regulations 11. ALWAYS wear closed toe shoes, eye and ear protection, and appropriate clothing on the stage and shop areas.
26 Safety Rules and Regulations This means: Do not wear rings, ties, or loose clothing when operating machinery. Do not wear sandals or flip flops when on stage or shop areas only hard-sole shoes.
27 Safety Rules and Regulations This means: Wear safety glasses when cutting or drilling materials. Face masks should be worn when working with paints and such materials. Do not wear shorts when working on stage.
28 Safety Rules and Regulations This means: Long hair should be tied back. Remove all dangling necklaces, scarves, etc. Ear protection may be worn at your discretion.
29 Safety Rules and Regulations 12. Make sure depth and thickness levels are properly set on all cutting blades.
30 Safety Rules and Regulations 13. Never operate equipment until guards are in place and working properly.
31 Safety Rules and Regulations 14. Be aware of others around so that nothing is thrown from the a saw, which may cause injury.
32 Safety Rules and Regulations 15. Make sure all on and off switches are in proper working condition.
33 Safety Rules and Regulations 16. Keep hands and clothing away from cutting surfaces.
34 Safety Rules and Regulations 17. Never adjust settings on machinery until switch is off and blades have ceased to rotate.
35 Safety Rules and Regulations 18. Use safe lifting practices.
36 Safety Rules and Regulations This means: Make sure you can physically lift the weight. Get as close to the object as possible for picking it up. Make sure your footing is secure.
37 Safety Rules and Regulations This means: Do not twist while lifting. Lift smoothly but not slowly. Do not jerk the load. Bend at the knees not your waist and keep back straight. Get someone to help you.
38 Safety Rules and Regulations This means:
39 Safety Rules and Regulations 19. Never work alone in the shop or shop areas.
40 Safety Rules and Regulations 20. Never work in the scene shop without direct supervision from the teacher.
41
42 Quiz Time Which of the following shoes would be the best choice for working in a shop? B A
43 Which items are acceptable to wear in the shop? B Quiz Time A C
44 Quiz Time Which of the following people displays correct lifting?
45 Quiz Time T or F Never work alone in a scene shop. T or F You may use equipment that you have not been checked out on or taught to use. T or F The teacher doesn t have to be present for students to use power tools.
46 Quiz Time T or F Dull blades are okay for use on lumber. T or F Keep hands away from cutting areas. T or F Your workplace should be neat and tidy at all times.
47 Quiz Time T or F It is not necessary to report damage to tools and equipment. T or F Always check depth and thickness of cutting blades. T or F Ear plugs are optional at your discretion.
48 Quiz Time T or F Ladders must be able to support four times the intended load of the ladder, or 3.3 times the intended load for heavy-duty metal or plastic ladders. T or F Steps should be between 15 and 18 inches apart.
49 Quiz Time T or F Ladders should be tied together to provide longer stretches of ladder unless they were built with that intention. T or F Wood ladders should be covered in any opaque coating except for identification labels on ONE side of ONE side-rail. This is to allow examination of the state of the wood.
50 Quiz Time T or F Never use the top two steps of a stepladder. T or F Only parts of the ladder are intended for use as a stepping surface. T or F When using tools on a ladder they should never be secured to the person. Tools should ALWAYS be left on the top of a ladder when not in use.
51 Quiz Time T or F Extension cords used with portable electric tools shall be of three wire type and periodically inspected prior to each use. T or F Any defective tool shall be thrown away immediately T or F Impact tools, such as drift pins, wedges and chisels, should have mushroomed heads.
52 Fill In The Blank of tools shall be kept free of splinters or cracks and be kept tight in the tool. Never work on the or in the alone. When power tools are designed to accommodate, they shall be equipped with when in use.
53 Fill In The Blank When operating the fly system the flyman must call. If you are on-stage when the flyman calls the correct phrase to call back is The fly system should be operated and.
54 Fill In The Blank NO ONE IS ALLOWED ON the you have been assigned. unless
55 Fill In The Blank AT NO TIME SHOULD OR BE BROUGHT INTO THE LIGHT OR AUDIO BOOTH. No one should be inside the or booth with you, without Ms. Raymond s prior approval.
56 Fill In The Blank All instruments must have a safety cable attached and all bolts properly tightened. Do not touch the of any stage lamp. If touched, clean the envelope with alcohol.
57 Fill In The Blank off or hiding in places not visible to me is not allowed. I will consider this the same as walking out of class even if you are still in the building. Do not operate a tool with a safety system that or.
58 Open Ended Questions When is the most dangerous time in a production? Why is it so dangerous? What is the purpose of a shop vacuum? What is something students should never do on a catwalk?
59 Open Ended Questions What happens to the stage curtains or sike when they are touched? Who can prevent tools from being stolen or replaced? Who can prevent bodily harm or injuries to others by following instructions and using tools in a safe manner?
60 Open Ended Questions List four leading causes of accidents while working in a scene shop:
61 Quiz Time Which picture best represents horseplay? A B C
62 Quiz Time B Which picture shows the best use for a staple gun? A
63 Quiz Time Which of the following safety devices do you have a choice in wearing? B A
64 Quiz Time T or F Always seek instruction before using unfamiliar tools. T or F Never distract the tech director when someone is operating equipment. T or F Report all unsafe conditions to the tech director.
65 Quiz Time T or F Make sure all on and off switches are working properly. T or F Be aware of others around you. T or F Never adjust settings while the blade is rotating.
66
67 Exit Slip COPY the question and answer in three or more sentences. Why is Safety important in a technical theatre classroom. Give an example of what not to do.
68 Homework Get Binders for class with properly labeled sections. I will grade you on this next week. Get Theatre Handbook Signed Bring in Class Fees Get Safety Manual Signed. I will grade you on this next week.
69 Tech IV Guys and Dolls Set Design
Williamsport Community Woodshop
Center for Creativity Williamsport Community Woodshop Work Rules The following rules are designed for your safety and the safety of other s. Non-compliance to these rules may result in your expulsion from
Safety Rules General Safety Rules. Scene Shop Safety Power Tools
Safety Rules General Safety Rules Be careful. Pay attention to what you are doing. Never operate a power tool while talking. Never distract a person who is working with a power tool. Being careful is your
University of Delaware. Shop Safety
University of Delaware Shop Safety The first step in preventing personal injury or machine damage in the shop is to make sure that you are familiar with and know how to operate the equipment correctly.
ISD #535 Rochester Public Schools
ISD #535 Rochester Public Schools Health & Safety Office Maintenance Service Building 10 9½ St SE Rochester, MN 55904 507-328-4507 Management Plan for Machine Guarding Modification Date Document Modification
Student Shop Safety. University of Tennessee Safety Guide GS-005. Purpose. Scope and Applicability. Definitions and Abbreviations.
Student Shop Safety University of Tennessee Safety Guide GS-005 Document Contact: EHS Date effective: August 1, 2012 Revision Date: June 7, 2017 Purpose Machine shops are present in many departments and
DEPARTMENT OF THEATRE AND DANCE CALIFORNIA STATE UNIVERSITY, FULLERTON
DEPARTMENT OF THEATRE AND DANCE CALIFORNIA STATE UNIVERSITY, FULLERTON SCENIC LAB SAFETY PROCEDURES (CPAC 154) 1. POLICY The Department Scenic Lab is a facility, which supports courses in scenic design
"SAFETY ORIENTATION IN CONSTRUCTION ENVIRONMENTS"
MAJOR PROGRAM POINTS "SAFETY ORIENTATION IN CONSTRUCTION ENVIRONMENTS" Part of the "CONSTRUCTION SAFETY KIT" Series Quality Safety and Health Products, for Today...and Tomorrow OUTLINE OF MAJOR PROGRAM
"SAFETY ORIENTATION IN CONSTRUCTION ENVIRONMENTS"
PRESENTER'S GUIDE "SAFETY ORIENTATION IN CONSTRUCTION ENVIRONMENTS" Part of the Construction Safety Kit Series Quality Safety and Health Products, for Today... and Tomorrow OUTLINE OF MAJOR PROGRAM POINTS
OSHA Office of Training and Education 2
The Occupational Safety and Health Administration aims to ensure employee safety and health in the United States by working with employers and employees to create better working environments. Since its
DENTAL SHOP SAFETY. James Kaznosky Environmental Health and Safety
DENTAL SHOP SAFETY James Kaznosky Environmental Health and Safety TRAINING OBJECTIVES Types of Machines at Dental School lab General Shop Hazards General Shop Safety Rules What to do in Case of Injury
Student Information & Laboratory Safety Contract
Student Information & Laboratory Safety Contract Mrs. Mawhiney Student Information Last Name First Name Preferred Name Home Address (including ZIP) Home Phone student e-mail Parent/Guardian Name Relationship
QUEENSLAND UNIVERSITY OF TECHNOLOGY
QUEENSLAND UNIVERSITY OF TECHNOLOGY SITE SPECIFIC SAFETY MANAGEMENT PLAN FOR SAMFORD HOUSE SAMFORD ECOLOGICAL RESEARCH FACILITY SAMFORD VALLEY 2007 Dylan Randall SN: 06305466 dylan.randall@student.qut.edu.au
General Guidelines: 1. Conduct yourself in a responsible manner at all times in the Art Classroom.
ART STUDENT SAFETY CONTRACT Purpose: Art is a hand-on class. You will be doing many activities in this room that will require the use of chemicals, tools and machines. Safety in the Art Room is the number
Work At Heights Toolkit. for Supervisors
Work At Heights Toolkit for Supervisors For Supervisors How to use this toolkit? The toolkit aims to provide information for supervisor to communicate one topic a day to workers. Pictures are for illustration
accidents which arise due to non-observance of these instructions and the safety information herein. SPECIFICATIONS
18 GAUGE 1-1/4 INCH BRAD NAILER Model: 7611 CALIFORNIA PROPOSITION 65 WARNING: You can create dust when you cut, sand, drill or grind materials such as wood, paint, metal, concrete, cement, or other masonry.
Job Safety Analysis. Macau PuiChing Middle School Ranger - Delphinus MATE ROV 2016
Job Safety Analysis Ranger - Delphinus MATE ROV 2016 Job safety analysis and control measures Prevention is better than cure, so prior to starting any task, evaluate the potential hazards and take the
CONSTRUCTION SAFETY PROGRAM FOR. Golder Acoustics Inc.
CONSTRUCTION SAFETY PROGRAM FOR Golder Acoustics Inc. TABLE OF CONTENTS Topic... Page Safety and Health Policy... 2 Safety and Health Objectives... 3 Job Site Inspections... 4 Contractor Safety Administrator...
Lab: Safety Due: Lab # 0
Name: Lab Section: Lab: Safety Due: Lab # 0 Purpose Science is a hands-on laboratory class. You will be doing many laboratory activities which require the use of hazardous chemicals. Safety in the science
WORKSHOP CARPENTRY/FENCING
ELECTRICAL Power Cords 1. Check all power cords (extension leads) before use to ensure that the tag is current. Please Note: For all workshop areas and hostel, this is every year. For all office areas
CUSTODIAL Safety Inspection Checklist
CUSTODIAL Safety Inspection Checklist Priority 1 Any condition which is life-threatening, or may cause injury, or permanent disability Priority 2 Any condition which may cause serious, but non-disabling
CONSTRUCTION SAFETY SERIES: Safety Orientation
ERI Safety Videos Videos for Safety Meetings C001 CONSTRUCTION SAFETY SERIES: Safety Orientation Leader s Guide Marcom Group Ltd. INTRODUCTION TO THE PROGRAM Structure and Organization Information in this
EMPLOYEE SAFETY ORIENTATION - PHYSICAL PLANT, RESIDENCE
Name Department Initial Orientation Date Supervisor Review Instructions: Check off each section once you have read and discussed it with your Supervisor. EMPLOYEE SAFETY ORIENTATION - PHYSICAL PLANT, RESIDENCE
accidents which arise due to non-observance of these instructions and the safety information herein. SPECIFICATIONS
18 GAUGE 2 INCH BRAD NAILER Model: 7555 CALIFORNIA PROPOSITION 65 WARNING: You can create dust when you cut, sand, drill or grind materials such as wood, paint, metal, concrete, cement, or other masonry.
OWNER S MANUAL. Page: 1 of 8
Air Needle Scaler OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal
2.25 Work Equipment Policy and Procedure Table of Contents
Table of Contents Section 1 - Policy... 3 1.1 Purpose... 3 1.2 Scope... 3 1.3 Requirements... 3 1.4 Responsibilities... 3 Section 2 - Procedure... 4 Section 3 - References... 5 3.1 Statutory Documents...
Custodial and Janitorial
Custodial and Janitorial Safety Man says Janitorial and Custodial staff are located throughout school facilities and are critical to the success of safety efforts on every campus. Custodial and Janitorial
Slips, Trips, Falls Safety Meeting
Meeting Objectives To point out the danger of one of the most common and preventable causes of serious accidents and accidental deaths, and to explain practices to help avoid such accidents. The result
NZQA registered unit standard 1178 version 7 Page 1 of 6
Page 1 of 6 Title Follow safe practices in an electrical workplace Level 2 Credits 3 Purpose This unit standard covers general safety practices for workers in the electrical and related industries. People
New Employee Safety Orientation. Presented by: Risk Management Services 2419 Cockrell, Dallas TX (972)
New Employee Safety Orientation Presented by: Risk Management Services 2419 Cockrell, Dallas TX 75215 (972) 925-4050 Welcome to a Culture of Safety! We want to help you work safely so you go home to your
New Employee Safety Indoctrination Checklist
New Employee Safety Indoctrination Checklist Emergency Response Training Read and understand the Facility s Emergency Response Action Plan Complete Emergency Response Training Locate the Facility s Evacuation
Increase safety in the workplace
Increase safety in the workplace Serious accidents can easily happen in the workshop or on construction sites, so keeping yourself and others safe at work is vital. Your supervisor has asked you to prepare
RARS5000 AIR BODY SAW OWNER S OPERATING MANUAL
RARS5000 AIR BODY SAW OWNER S OPERATING MANUAL DESCRIPTION 1. No mar 2. No mar tip 3. Housing grip 4. Trigger 5. Air inlet 6. Air inlet plug 7. Plastic board Important! It is essential that you read the
Welcome to good housekeeping training. This session is designed for all employees. To many people, good housekeeping in the workplace just means
Welcome to good housekeeping training. This session is designed for all employees. To many people, good housekeeping in the workplace just means sweeping up at the end of the shift. But good housekeeping
University of Massachusetts Dartmouth
Page 1 of 7 University of Massachusetts Dartmouth College of Engineering Mechanical Engineering Department Best Laboratory Safety Practices This handbook intends to provide you with essential safety information
The Yorkshire Waterways Museum, Dutch River Side, Goole, POND AND NATURE TRAIL RISK ASSESSMENT SHE/RA/00
The Sobriety Project The Yorkshire Waterways Museum, Dutch River Side, Goole, DN14 5TB POND AND NATURE TRAI RISK ASSESSMENT SHE/RA/00 Title of Activity: ocation(s) of Work: Using the pond area and nature
Meet Today s Webinar Team
Meet Today s Webinar Team Moderator: Stacy Rose, CSP Stacy is a certified professional with 16 years experience in workplace safety. Stacy holds a bachelor s in industrial engineering and a master s in
Hudson City School District. Student Safety Contract
Hudson City School District Student Safety Contract Purpose To all Students The following rules and regulations are extremely important to your safety in many areas of the school environment. Your instructor
Take Home Test Score:
STUDENT I, (Student s name) have read and agree to follow all of the safety rules set forth in this contract. I realize that I must obey these rules to insure my own safety, and that of my fellow students
SHASTA COUNTY OFFICE OF EDUCATION CODE OF SAFE PRACTICES (CONSTRUCTION) Name of Project
SHASTA COUNTY OFFICE OF EDUCATION CODE OF SAFE PRACTICES (CONSTRUCTION) Name of Project GENERAL* 1. All employees shall follow these safe practices rules, render every possible aid to safe operations,
Identify, evaluate and assess workplace improvements to reduce hazards. Provide personal protective equipment based on hazard assessment
PAGE 1 OF 7 1.0 INTRODUCTION The purpose of this program is to help employees work safely in their environments by identifying and assessing workplace hazards, eliminating or reducing the hazards where
HEALTH & SAFETY ARRANGEMENTS FOR MANAGEMENT OF WORK AT HEIGHT
HEALTH & SAFETY ARRANGEMENTS FOR MANAGEMENT OF WORK AT HEIGHT INTRODUCTION Cwmni CYNNAL recognises that accidents can arise from working at height. Falls from height can be a cause of injury and absence
SAFETY HANDBOOK FOR VOLUNTEERS
SAFETY HANDBOOK FOR VOLUNTEERS This handbook is intended to provide you with a general orientation to volunteering with HFHWM and a basic understanding of our policies. You are encouraged to familiarize
CHAPTER 37: EQUIPMENT TRAINING CERTIFICATION
CHAPTER 37: EQUIPMENT TRAINING CERTIFICATION EQUIPMENT TRAINING CERTIFICATION INTRODUCTION Prior to any JTT worker operating a piece of equipment, they must be properly trained on the applicable piece
WORK HEALTH AND SAFETY
Employees in South Australia are protected by and required to adhere to State & National health and safety regulations. Employers, employees and others all have an important role to play. For further information
RELEASE AND WAIVER OF LIABILITY FOR ADULTS and CONSTRUCTION SAFETY GUIDE
PLEASE READ CAREFULLY. RELEASE AND WAIVER OF LIABILITY FOR ADULTS and CONSTRUCTION SAFETY GUIDE THIS IS A LEGAL DOCUMENT. BY AGREEING TO AND SIGNING THIS DOCUMENT YOU ARE GIVING UP CERTAIN LEGAL RIGHTS
SAFETY HANDBOOK FOR HABITAT VOLUNTEERS
SAFETY HANDBOOK FOR HABITAT VOLUNTEERS This handbook is intended to provide you with a general orientation to volunteering with Habitat for Humanity of Morgan County (HFHMC) and a basic understanding of
75 Ton SD Shop Press Operating Instructions
75 Ton SD Shop Press Operating Instructions MODEL NO. 856SD Hazard Symbols Used in the Manuals This manual includes the hazard symbols defined below when the operations or maintenance job involves a potential
Los Angeles Unified School District Division of Adult and Career Education LOS ANGELES UNIFIED SCHOOL DISTRICT DIVISION OF ADULT AND CAREER EDUCATION
LOS ANGELES UNIFIED SCHOOL DISTRICT DIVISION OF ADULT AND CAREER EDUCATION SCHOOL: AREA: SAFETY TEST FOR INDUSTRIAL EDUCATION AUTO BODY REPAIR DIVISION OF ADULT AND CAREER EDUCATION Name of Student: Date:
Westfield State University Dever Stage Safety Manual
Westfield State University Dever Stage Safety Manual November 2010 Prepared by Ernie Iannaccone, WSU Technical Director Subject to Change at the discretion of the Technical Director 11/01/2010 Page 1 Contents
RISK ASSESSMENT. Bobcat Excavator. Models , (Series D & G) For. Version 1.2
PO Box 50, Hornsby, NSW 2077 Phone: 1800 643 853 Web: www.bobcat.com.au RISK ASSESSMENT For Bobcat Excavator Models 322 341, (Series D & G) CONTENTS Applicability Standards referenced in the preparation
PPE and Tools PPE and Tools
PPE and Tools PPE and Tools PPE Definition Personal protective equipment (PPE) refers to protective clothing, helmets, goggles, or other garments or equipment designed to protect the wearer's body from
Thanks for shopping with Improvements! 20 Reel Mower with Catcher Item #
Thanks for shopping with Improvements! 20 Reel Mower with Catcher Item # 411837 To order, call 1-800-642-2112 West Chester, OH 45069 0313 If you have any questions regarding this product, call 1-800-642-2112
Parts and Owners Manual
Parts and Owners Manual MOWER MODEL: SERIAL: ENGINE MODEL & HP: DATE PURCHASED: PURCHASED FROM: You must receive special training from the dealer before operating this mower. 9/30/2005 Commercial Mower
POWER DELIVERY. Contractor Health & Safety General Terms and Conditions. Appendix B Personal Protective Equipment
Personal Protective Equipment ( PPE ): All PPE worn on IPL job sites must have ANSI and/or approval ratings. Hard hats and safety glasses with side shields (including prescription eyewear) shall be worn
Hand and Power Tool. Version 1.0
This document is intended to provide basic safety guidelines for the Physical Plant Department at Community College of Allegheny County. The information provided in this guide may vary by site. Version
Welcome Back To School
Welcome Back To School Bellringer: (Think, Pair, Share) 1. What does science mean to you? 2. What does Biology mean to you? 3. What do you think you will be exploring this year in Biology? LAB SAFETY RULES
AUTOMOTIVE SYSTEMS LABORATORY SAFETY GUIDE (V1-8/30/17)
COLLEGE OF ENGINEERING & APPLIED SCIENCES FLOYD HALL AUTOMOTIVE SYSTEMS LABORATORY SAFETY GUIDE (V1-8/30/17) ROOM G-114 1 P a g e General Lab Safety Rules 1. Safety glasses, or appropriate goggles/face
New Hire Safety Orientation. Welcome to Flexicrew, our number one priority is you and your safety.
New Hire Safety Orientation Welcome to Flexicrew, our number one priority is you and your safety. 1 New Employee Responsibilities As a contract worker with Flexicrew Staffing, I understand by signing this
CALIFORNIA BLACKSMITH ASSOCIATION
CALIFORNIA BLACKSMITH ASSOCIATION SAFETY PLAN AND GUIDE PREPARED JANUARY 2002 Revision 1 1 Forward Safety is paramount and cannot be overly expressed. Two of the main elements of Safety are: Common sense.
ERI Safety Videos Videos for Safety Meetings POWER SAW SAFETY. Leader s Guide 2001, SAFETY SOURCE PRODUCTIONS
ERI Safety Videos Videos for Safety Meetings 2111 POWER SAW SAFETY Leader s Guide 2001, SAFETY SOURCE PRODUCTIONS POWER SAW SAFETY This easy-to-use Leader s Guide is provided to assist in conducting a
INTENDED USE TECHNICAL SPECIFICATIONS
1/2IN. HEAVY-DUTY AIR IMPACT WRENCH OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result
Slip, Trip and Fall Prevention
Slip, Trip and Fall Prevention Safety Training Course Module Two: Preventing Slips, Trips and Falls Copyright protected. All rights reserved. Training Agenda: Module Two Preventing Slips, Trips, and Falls
Table of Contents. Welcome Letter Contact Information Paperwork Committee Descriptions Attendance... 5
Table of Contents Welcome Letter... 2 Contact Information... 3 Paperwork... 3 Committee Descriptions... 4 Attendance... 5 Rehearsal Information... 6 Theater Rules & Etiquette... 7 Costume Information...
ONFORCE PRO SAFETY GUIDE. I. Introduction
ONFORCE PRO SAFETY GUIDE I. Introduction By partnering with OnForce, service buyers can connect with thousands of highly skilled service professionals to fulfill on-site work throughout the US. One of
DEPARTMENT SAFETY RULES AND PROCEDURES
DEPARTMENT SAFETY RULES AND PROCEDURES 1. Working Hours 1.1. Work is primarily performed in the student machine shop under the direct supervision of a technician or faculty advisor weekdays between 8 am-
California Fast Food Safety Association INJURY AND ILLNESS PREVENTION PROGRAM
California Fast Food Safety Association INJURY AND ILLNESS PREVENTION PROGRAM OF: POLICY AND RESPONSIBILITY: We are committed to maintaining an injury and illness free workplace. Accordingly we have adopted
PAC. Risk Management Resources. The cost of Workers Compensation can be controlled. Also visit WELLAdvised
PAC Risk Management Resources The cost of Workers Compensation can be controlled Also visit www.babbins.com WELLAdvised Safety Guidelines for Home Visits 1) Do not give consumers your home phone number.
INSTALLATION MANUAL Matheson Tri-Gas Cabinet Enclosures
INSTALLATION MANUAL Matheson Tri-Gas Cabinet Enclosures MINT-0289-XX TABLE OF CONTENTS Limited Warranty... 3 User Responsibility... 3-4 General Service... 4 Safety Precautions.... 5 Physical Dimensions..
Proper Operation of Heath Consultants Incorporated Plunger Bar
Proper Operation of Heath Consultants Incorporated Plunger Bar Heath Consultants Incorporated 9030 Monroe Road Houston, TX 77061 (800) HEATH-US www.heathus.com Notice The contents of this manual are proprietary
School Safety Guidelines All machinery should have safety-guards and protective gear for users
Bedok South Secondary School Design and Technology Workshop Safety Introduction The Bedok South Secondary School (BDS) Design and Technology (D&T) department believes strongly that all students, teachers,
SPECIFICATIONS Type: Twin stack, single phase Tank: 4 gallon Air Output: PSI; PSI Max PSI: 125 PSI HP: 1.
2 GALLON TWIN STACK AIR COMPRESSOR Model: 9526 DO NOT RETURN TO STORE. Please CALL 800-348-5004 for parts and service. CALIFORNIA PROPOSITION 65 WARNING: You can create dust when you cut, sand, drill or
HEALTH AND SAFETY POLICY APPENDIX B WORKING AT HEIGHT GUIDE AND RISK ASSESMENT
KENSWORTH PRIMARY SCHOOL HEALTH AND SAFETY POLICY APPENDIX B WORKING AT HEIGHT GUIDE AND RISK ASSESMENT KPS-005 RISK ASSESSMENT FOR: Title of activity / person Working at height low level activities What
Slips, Trips and Falls
This document is intended to provide basic safety guidelines for the Physical Plant Department at Community College of Allegheny County. The information provided in this guide may vary by site. Version
Do you have a written, effective Injury and Illness Prevention Program (IIPP)? Does everyone know who is responsible for the IIPP in the worksite?
HEALTH HAZARD AND ASSESSMENT SAFETY COMMITTEES CHECKLIST HAZARD ASSESSMENT CHECKLIST AG TOOL 2 1 Sample Safety Inspection Checklist Workplace: Date: Inspected by: Each No answer may indicate a problem.
The purpose of this training is to give field technicians awareness training and guidelines on potential hazards they may encounter in the field.
Purpose The purpose of this training is to give field technicians awareness training and guidelines on potential hazards they may encounter in the field. Manual Material Handling Manual material handling
Safe Work Method Statement
Company Name: Safe Work Method Statement Site Address: Other Details: Contractor: Activity/Trade: Electrician Date: TASKS List the tasks required to perform the activity in sequence carried out. Entry
20 Ton SD Shop Press Operating Instructions
20 Ton SD Shop Press Operating Instructions MODEL NO. 850SD Hazard Symbols Used in the Manuals This manual includes the hazard symbols defined below when the operations or maintenance job involves a potential
M S I C R A N E S C A L E
2 M E A S U R E M E N T S Y S T E M S I N T E R N A T I O N A L Table of Contents Forward...3 Safe Operating Guidelines...4 Operating Suggestions...4 Handling Hoist Motion...4 Safe Loading and Rigging
DRAG HARROW SAFETY & OPERATING INSTRUCTIONS. Original Language. Serial No. Order No.
DR ` DRAG HARROW SAFETY & OPERATING INSTRUCTIONS Serial No. Order No. Original Language DR Power Equipment Toll-free phone: 1-800-DR-OWNER (376-9637) Fax: 1-802-877-1213 Website: www.drpower.com Read and
Los Angeles Unified School District Division of Adult and Career Education LOS ANGELES UNIFIED SCHOOL DISTRICT DIVISION OF ADULT AND CAREER EDUCATION
LOS ANGELES UNIFIED SCHOOL DISTRICT DIVISION OF ADULT AND CAREER EDUCATION SCHOOL: AREA: SAFETY TEST FOR INDUSTRIAL EDUCATION WELDING Name of Student: Date: Address: Phone: Date Enrolled: Date of Birth:
SS650 HELMET USER MANUAL
SS650 HELMET USER MANUAL READ BEFORE USING YOUR SPEED AND STRENGTH HELMET Congratulations on the purchase of your new Speed and Strength motorcycle helmet. At Speed and Strength, we take great pride in
Part #: 15158; 15159; 15188; 61027; 61029; 61140; 61141
Product Name: Guardrail Receivers Part #: 15158; 15159; 15188; 61027; 61029; 61140; 61141 Instruction Manual Do not throw away these instructions! Read and understand these instructions before using equipment!
Chapter 2 Rigging. Cutting Wire Rope. Anchoring Wire Rope to Drum. Winding Wire Rope Onto Drum
Chapter 2 Rigging Cutting Wire Rope The wire rope must be tightly seized on both sides of the point where the wire rope will be cut, as shown in Figure 2-1. Seize the wire rope with either seizing wire
1. SAFETY 2. PREPARATION 3. FRAME 4. TRANSMISSION 5. DRIVE 6. ROW UNIT 7. OPTIONAL EQUIPMENT
TABLE OF CONTENTS 1. SAFETY 2. PREPARATION 3. FRAME 4. TRANSMISSION 5. DRIVE 6. ROW UNIT 7. OPTIONAL EQUIPMENT This symbol means: ATTENTION - BECOME ALERT YOUR SAFETY IS INVOLVED. When you see this symbol
TRADE AREA: ELECTRICAL INDUSTRY
TRADE AREA: ELECTRICAL INDUSTRY Some possible workplace hazards and possible ways for Host employers and Apprentices/Trainees in controlling these hazards. What are possible hazards? What could be possible
Risk Assessment For : Ace Tones Entertainments Ltd
Assessment Name: Bungee Run Assessment Type: General Assessor Name: Lewis Slack Affected Site(s): Assessment Date: 29/05/2017 Review Period: Annually Approved By: Lewis Slack Review Date: 29/05/2018 Approved
Part 3. Safe Hospitality. Safety, Health & Welfare in Hotels, Restaurants, Catering & Bars. Part 3 - Bars
Part 3 Safe Hospitality Safety, Health & Welfare in Hotels, Restaurants, Catering & Bars SHOULD BE READ IN CONJUNCTION WITH Part 1 - General Contents SHOULD BE READ IN CONJUNCTION WITH Part 1 - General
CORPORATE HEADQUARTERS WESTERN SALES AND MANUFACTURING PLANT P.O.
SLIDE OWNERS MANUAL CORPORATE HEADQUARTERS WESTERN SALES AND MANUFACTURING PLANT P.O. Box 400 1017 SW Berg Parkway Canby, Oregon 97013 Phone: (503) 266-2231 Fax: (503) 266-4334 www.srsmith.com 06-821 S.R.
MARCH CORE REFRESHER HSE TOOL BOX
MARCH CORE REFRESHER HSE TOOL BOX PPE & HAND SAFETY SELECTION OF PERSONAL PROTECTION EQUIPMENT Once it has been determined that personal protection equipment is to be used; select the protective equipment
PUN M Manual Finger Punch Safety and Operation Manual
PUN M Manual Finger Punch 300-600 - 900 Safety and Operation Manual For punching thermoplastic belting materials only. WARNING IMPROPER OR UNSAFE use of this tool can result in serious bodily injury! This
WALL-MOUNT GARDEN HOSE REEL OWNER S MANUAL
WALL-MOUNT GARDEN HOSE REEL OWNER S MANUAL Perpendicular Mount Parallel Mount WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety
You must NOT touch any equipment unless you are authorised to work on or with that equipment and you have followed correct safety procedures.
SYDNEY TOWN HALL 1 HIRER & CONTRACTOR SAFETY FACT SHEET Issue 2 September 2013 www.sydneytownhall.com.au City of Sydney - Venue Management will provide and maintain a safe working environment for the health,
Volunteer Safety Manual
Volunteer Safety Manual Habitat for Humanity Sonoma County Building homes, communities, and hope! 1 Introduction Habitat for Humanity of Sonoma County VOLUNTEER WORK CREW SAFETY MANUAL Safety is everybody
Wolfson Campus Natural Science Department. Biology Laboratory. Student Safety Contract
Wolfson Campus Natural Science Department Biology Laboratory Student Safety Contract July 2000 Wolfson Campus Student Safety Contract-Biology Laboratory Purpose The Biology laboratory is a hands-on learning
Removing Frozen Clips
Removing Frozen Clips Warning You cannot undertake this activity in the rail corridor unless you have completed a pre work brief and work site protection plan. Reference should also be made to the Protocol
60 Drum Style Spike Aerator
60 Drum Style Spike Aerator OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
Page 1. Single Scull Car Rack Assembly and User s Manual " "
Page 1 Single Scull Car Rack Assembly and User s Manual Page 2 Items in the box: (2) V cradles (2) 4 rails (1) 1 3/4 X 18 rail coupler (4) 1/4-20 X 4 1/2 bolts (2) 1/4-20 X 2 1/2 bolts (12) 1/4 flat washers
Working safely in an engineering environment
Unit 001 Working safely in an engineering environment Level: 2 Credit value: 5 NDAQ number: 500/9514/6 Unit aim This unit covers the skills and knowledge needed to prove the competences required to work
Klondex Midas Operations, Inc. Midas Mine Elko County, NV
Klondex Midas Operations, Inc. Midas Mine Elko County, NV April 28, 2014 Machinery 2 Overview Underground gold mine (2014: approximately 258,021 h worked and 159 employees) 53-year-old miner Victim was
techconnect CARPENTRY Objectives Unit 2 Workplace Safety TechConnect - STUDENT WORKBOOK 2-1 Workplace Safety - Unit 2
Unit 2 Workplace Safety techconnect One of the keys to working in any industry is the safety and health of the workers. The carpentry industry can be a dangerous industry in which to work if you do not