Pressure regulators Pressure relief valves Safety valves. Brochure

Transcription

1 Pressure regulators Pressure relief valves Safety valves Brochure

2 2 Pressure regulators Pressure relief valves Safety valves Qn = l/min thread-in 3 Safety valve, Series RV2 Qn = l/min thread-in 7

3 Pressure regulators Pressure relief valves Qn = l/min thread-in 3 Certificates Version Working pressure min./max. Ambient temperature min./max. Medium CE declaration of conformity Poppet valve 0 bar / 20 bar -20 C / +100 C Compressed air Materials: Housing Seals Brass Fluorocaoutchouc Technical Remarks The specified performance values are achieved at a 10% (PE <1 bar, +0.1 bar) pressure increase, measured with compressed air at 20 C.

4 4 Pressure regulators Pressure relief valves Qn = l/min thread-in Port 1 Opening pressure of valve [bar] Flow 1 2 [l/min] Part No. G 1/ R G 1/ R G 1/ R G 1/ R G 1/ R G 1/ R G 1/ R G 1/ R G 1/ R G 1/ R G 1/ R G 1/ R G 3/ R G 3/ R G 3/ R G 3/ R G 3/ R G 3/ R G 3/ R G 3/ R G 3/ R G 3/ R G 1/ R G 1/ R G 1/ R G 1/ R G 1/ R G 1/ R G 1/ R G 1/ R G 1/ R G 1/ R G 1/ R G 1/ R G 1/ R G 1/ R G 1/ R G 1/ R G 1/ R G 3/ R G 3/ R G 3/ R G 3/ R G 3/ R G 3/ R G 3/ R G 3/ R G 3/ R G 3/ R

5 Pressure regulators Pressure relief valves Qn = l/min thread-in 5 Dimensions L H G D SW G = connection Part No. Ø D H L SW T NW [Nm] R R R R R R R R R R R R R R R R R R R R R R R R R R T = maximum torque NW = nominal width

6 6 Pressure regulators Pressure relief valves Qn = l/min thread-in Part No. Ø D H L SW T NW [Nm] R R R R R R R R R R R R R R R R R R R R R R R T = maximum torque NW = nominal width

7 Pressure regulators Pressure relief valves 7 Safety valve, Series RV2 Qn = l/min thread-in Certificates Version Working pressure min./max. Ambient temperature min./max. Medium CE declaration of conformity Poppet valve 0 bar / 20 bar -20 C / +100 C Compressed air Materials: Housing Seals Brass Fluorocaoutchouc Technical Remarks The specified performance values are achieved at a 10% (PE <1 bar, +0.1 bar) pressure increase, measured with compressed air at 20 C. Opening pressure of valve < 1 bar Port 1 = input (e.g. pressure reservoir) port 2 = exhaust Port 1 Port 2 Opening pressure of valve [bar] Flow 1 2 [l/min] Part No. G 3/8 G 1/ R G 3/8 G 1/ R G 3/8 G 1/ R G 1/2 G 3/ R G 1/2 G 3/ R G 3/4 G R

8 8 Pressure regulators Pressure relief valves Safety valve, Series RV2 Qn = l/min thread-in Dimensions L2 L1 2 G1 1) 1 L3 G SW 1) Flow direction: 1 to Part No. G1 L1 L2 L3 SW T NW [Nm] R G 1/ R G 1/ R G 1/ R G 3/ R G 3/ R G T = recommended torque NW = nominal width

9 AVENTICS GmbH Ulmer Straße Laatzen, GERMANY Phone Fax info@aventics.com Find more contact information at Only use the AVENTICS products shown in industrial applications. Read the product documentation completely and carefully before using the product. Observe the applicable regulations and laws of the respective country. When integrating the product into applications, note the system manufacturer s specifications for safe use of the product. The data specified only serve to describe the product. No statements concerning a certain condition or suitability for a certain application can be derived from our information. The information given does not release the user from the obligation of own judgment and verification. It must be remembered that the products are subject to a natural process of wear and aging An example configuration is depicted on the title page. The delivered product may thus vary from that in the illustration. Subject to change. AVENTICS S.à r.l. This document, as well as the data, specifications and other information set forth in it, are the exclusive property of AVENTICS S.à r.l.. It may not be reproduced or given to third parties without its consent. PDF online