pneumatic rack and pinion actuators
|
|
- Rodger Garrison
- 5 years ago
- Views:
Transcription
1 pneumatic rack and pinion actuators
2 actuator features actuator features Nominal Values: Pressure rating of psig ( barg). Standard temperature range is -4 F to 5 F (- C to 5 C). High temperature range is -4 F to 3 F (- C; 5 C). Low temperature range is -4 F to 5 F (-4 C to 5 C). Pre-lubricated for life of actuator on assembly. Fully tested on manufacture %. Rotation adjustment -9 From MOD. 5 up to n standard + or - 5 o in both clockwise and counterclockwise direction by means of adjusting screws outside the internal air supply chambers n standard visual position indicators MOD. 7 n standard + or - 5 o in counterclockwise direction by means of adjusting screws in the caps n kit for + or - 5 o in clockwise direction available on request Die cast aluminum end caps n Standard polyester powder coated n Nickel plated upon request Concentric spring sets n Standard treatment phosphated n High resistance and reliability n Spring sets to suit different air pressure/ torque requirements n Long securing screws to allow safe dismantling for maintenance n Same body dimensions for DA/SR versions Assembling screws n Stainless steel as standard External connection n Namur pinion mounting n Namur solenoid valve mounting n Bottom of pinion according to ISO 5-DIN 3337 n Optional Beacon Indicator Operating Pressure Range - 4 psig to psig (. barg to barg) Operating Media Clean, dry air or clean, dry, non-corrosive gas Stroke 9 degrees standard Steel pinion n Nickel-plated for resistance to corrosion n Stainless steel (optional) for corrosive environments n Anti-blowout design Body manufactured from extruded aluminum UNI 66 n Hard-coat anodized as standard finish 45-5 (micron) n Good wear resistance n Bore finished to high standard to ensure low friction and long life Piston guides n Large contact area n Self-lubricating materials n Long life Seals n standard n Viton high temperature (optional) n H low temperature (optional) Pistons n Die cast aluminum n Nickel-plating upon request Twin rack and pinion design n Constant torque output (double acting) n compact design n Balanced internal forces n Robust design to ensure long life
3 PBM Pneumatic Actuator Torque Ratings Actuator Model All published torque values are guaranteed minimum values. Spring Set Double Acting Actuators Actuator Model Air pressure at actuator (psig) 6 psig psig Constant Torque Output Repair Kit PAVCL453D PAVCL PAVCL453D PAVCL PAVCL453D PAVCL PAVCL453D PAVCL PAVCL453D ,336 PAVCL PAVCL453D - - 5,64, PAVCL PAVCL453D - - 5,57,96 PAVCL PAVCL453D ,3 4, PAVCL PAVCL453D ,394 5,59 PAVCL PAVCL453D - -,9,9 PAVCL PAVCL453D ,97 5,469 PAVCL Spring Return Actuators Spring Torque Output (in-lbs) Air Pressure at Actuator (psig) 6 psig psig Torque Output from Pressure (in-lbs.) Start End Start End Start End PAVCL53S N/A N/A PAVCL453S N/A N/A 55 PAVCL53S N/A N/A PAVCL453S N/A N/A PAVCL53S N/A N/A PAVCL453S N/A N/A PAVCL53S N/A N/A PAVCL453S N/A N/A PAVCL53S N/A N/A PAVCL453S N/A N/A 37 PAVCL53S ,44 54 N/A N/A PAVCL453S ,43 N/A N/A, PAVCL53S ,33 7,35 64 N/A N/A PAVCL453S ,93,55 N/A N/A,76 79 PAVCL53S ,95,36,9 56 N/A N/A PAVCL453S ,7,453 N/A N/A,4,7 PAVCL53S ,4,77,447,35 N/A N/A PAVCL453S ,37, N/A N/A 3,45, PAVCL53S ,699 3, 4,7 3, N/A N/A PAVCL453S ,67 4,664 N/A N/A 5,93 3,539 PAVCL53S ,549,44,495 6,4 N/A N/A PAVCL453S ,735,735 N/A N/A 5,36 9, Weights and Operation Volumes Actuator Model Rotate CCW DA/SR Volume (cu.in.) Rotate CW DA Approx. wgt (lbs) Volume (cu.in.) PAVCL453D PAVCL453S PAVCL453D PAVCL453S PAVCL453D PAVCL453S PAVCL453D PAVCL453S PAVCL453D PAVCL453S PAVCL453D PAVCL453S PAVCL453D PAVCL453S PAVCL453D PAVCL453S PAVCL453D PAVCL453S PAVCL453D PAVCL453S PAVCL453D ,6. PAVCL453S Repair Kit PAVCL PAVCL PAVCL PAVCL PAVCL PAVCL PAVCL PAVCL PAVCL PAVCL PAVCL
4 COMPONENTI ATTUATORI ACTUATOR PARTS MOD. DAL 5 AL MOD. FROM 5 TO 6 Part. A Solo per mod. Only for mod Part. A 7 5 POSIZ. ITEM ITEM 3 4 3* 5 4* 6 7 5* 6* 9 7 ** 9* ** 6 7 3* *** 9 4* 5* DESCRIZIONE MATERIALE TRATTAMENTO QUANTITY MATERIAL TREATMENT TREATMENT DA Alluminio estruso - Extruded aluminium Ossidato duro - Hard anodized Corpo - Body Acciaio - Steel Pignone antiespulsione pinion BODY - Anti-blowoutEXTRUDED ALUMINUM HARD ANODIZEDNichelato - Nickel plated O-ring ANTI-BLOWOUT PINION STEEL NICKEL PLATED Anello distanziale - spacer ring O-RING O-ring DESCRIPTION DESCRIPTION MATERIAL O-ring SPACER RING Acciaio inox - Stainless steel Camma - Cam O-RING Anello camma - spacer O-RING Anello sotto Seeger - spacer Acciaio inox Stainless steel Rondella - washer CAM STAINLESS STEEL Acciaio - Steel Nichelato - Nickel plated Seeger - snap ring SPACER Alluminio pressofuso - Die cast aluminium Pistone - Piston SPACER O-ring STEEL Anello antifrizione - Antifriction ring WASHER STAINLESS Pattino reggispinta - thrust block SNAP RING STEEL NICKEL PLATED Dado di bloccaggio reg. - Stop bolt retaining nut Acciaio inox - Stainless steel PISTON DIE CAST ALUMINUM Acciaio inox - Stainless steel Vite di regolazione - Stop bolt Acciaio - Steel Fosfatata - Zinc-phosphate Molla esternao-ring - External spring Acciaio - Steel Fosfatata - Zinc-phosphate Molla centrale - central spring ANTIFRICTION RING Acciaio - Steel Fosfatata - Zinc-phosphate Molla interna - internal spring THRUST [4] Alluminio pressofuso - Die cast aluminium Verniciato - Painted Tappo sinistro - LeftBLOCK end cap Alluminio Tappo Right end capnut STOPdestro BOLT- RETAINING STAINLESS STEELpressofuso - Die cast aluminium Verniciato - Painted Guarnizioni Tappi - End cap seats STOP BOLT STAINLESS STEEL O-ring EXTERNAL SPRING ZINC-PHOSPHATE Acciaio inox - Stainless steel Vite di serraggio tappi - End cap fixing screw STEEL *Parts subject to wear ** Reinforced series DIN 47 -= UNI 7436 Valid for mod only ***Only for mod. 6-- Sis te 7 STAINLESS STEEL 4 : OH : / SA SO S END CAP FIXING SCREW /I 5 PAINTED : O-RING S anagement ce di m rti ISO 9 a m SA DIE CAST ALUMINUM END CAP SEATS IS O 9 RIGHT END CAP H ato fic O Particolari soggetti ad usura - Parts subject to wear ** Serie STEEL rinforzata DIN 47 - UNI Reinforced series DIN 47 - UNI *** CENTRAL SPRING ZINC-PHOSPHATE [4] Vale solo per mod Valid for mod only. INTERNAL SPRING STEEL ZINC-PHOSPHATE *** Solo per mod Only for mod LEFT END CAP DIE CAST ALUMINUM PAINTED Q.TA Q.TA QUANTITY DA SR SR [4] [4] Vedi set molle pagina 5 See spring 5 setting at page [4] SEE SPRING SETTING AT PAGE 5 - IS O
5 COMPONENTI ATTUATORI ACTUATOR PARTS MOD Part. A Part. A *Parts subject to wear ITEM DESCRIPTION MATERIAL TREATMENT QUANTITY DA QUANTITY SR BODY EXTRUDED ALUMINUM HARD ANODIZED ANTI-BLOWOUT PINION STEEL NICKEL PLATED 3* O-RING 4* O-RING 5* ANTIFRICTION RING PTFE 5% GRAPHITE 6* ANTIFRICTION RING PTFE 7 PLATE GGG4 PAINTED WASHER STAINLESS STEEL 4 9 STOP BOLT RETAINING NUT STAINLESS STEEL STOP SCREW STEEL ZINC PLATED FIXING SCREWS STAINLESS STEEL 4 4 PISTON DIE CAST ALUMINUM ZINC-PHOSPHATE 3 PRECOMPRESSED SPRING STEEL See spring setting at page 5 4 END CAP FIXING SCREW STAINLESS STEEL 5 END CAP DIE CAST ALUMINUM PAINTED 6* THRUST BLOCK 6 6 7* SPACER RING PINION WASHER STAINLESS STEEL 9 SNAP RING STEEL NICKEL PLATED * O-RING * ANTIFRICTION RING PTFE 5% GRAPHITE O-RING O-RING 4 4 ANTI BLOWOUT KEY
6 Dimensional Data for models 5 to MOD. DRILLING ISO 5 CH A B C D E F G H Ø I J ØK L M N O P Q R S T NPT 5 F3-F UNC BX.9 /4- UNC BX.35 / 63 F5-F /4- UNC BX.3 5/6- UNC BX.47 / 75 F5-F /4- UNC BX.3 5/6- UNC BX.47 / 5 F5-F /4- UNC BX.3 5/6- UNC BX.47 / F7-F /6- UNC BX.3 3/-6 UNC BX.55 /4 5 F7-F /6- UNC BX.47 3/-6 UNC BX.59 /4 5 F7-F o /6- UNC BX.47 3/-6 UNC BX.59 /4 4 F-F /-6 UNC BX.59 /-3 UNC BX.7 /4 6 F-F / /-6 UNC BX.55 /-3 UNC BX.67 /4 F / / / 5/- UNC BX.94 /4
7 Dimensions for model 7 MOD. DRILLING ISO 5 CH A B C D E F G H ØI J ØK L L M N O P S T NPT U V W Z 7 F /4- UNC B X. /
8 United States Canada Brazil Mexico Chile Australia United Kingdom Germany Sweden Spain Belgium France Ireland Switzerland Austria The Netherlands India Taiwan China Thailand Singapore Visit PBM online at to find the PBM domestic or international representative near you. PBM, Inc. 7 Sandy Hill Road n Irwin, PA PBM n n Fax: n info@pbmvalve.com LT-A 3/
HEAVY DUTY KNIFE GATE VALVE
HEAVY DUTY KNIFE GATE VALVE The (SER.22) model knife gate is a bi-directional lug type valve designed according to MSS-SP-81 and TAPPI TIS 405-8 for industrial service applications. The completely new
More informationTEC 1/2 3/ /4 1 1/ /2 3 4 DN A B 125,5 125,
143 B F F C A 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4 DN 15 20 25 32 40 50 65 80 100 A 77 85 91 118 126 142 147 179 188 B 125,5 125,5 159 218 225 250 270 290 330 C 40 40 59 69,5 126 87 88 97,5 104,5 F 12 12
More informationzkratka označení: PAL* technický list výrobku vytvořeno :13 1/6 pneumatický pohon série RE > tvrdý anodizovaný hliník NBR
pneumatický pohon série RE > tvrdý anodizovaný hliník zkratka označení: PAL* technický list výrobku Ausf Feder Modell Nm Port DW L B H kg RE161 RE1 RE043 RE6 RE161 RE1,1 bei 6 bar 35,5 bei 6 bar 70,6 bei
More information64 Series Pressure Reducing Regulators
Instruction Manual Form 1245 64 Series March 2006 64 Series Pressure Reducing Regulators W1943 Figure 1. 64 Series Regulator Introduction Scope of Manual This manual provides instructions for the installation,
More informationType Pressure Regulator. for increased air capacity. Fig. 1: Type Pressure Regulator. Mounting and Operating Instructions EB EN
Type 4708-45 Pressure Regulator for increased air capacity Fig. 1: Type 4708-45 Pressure Regulator Mounting and Operating Instructions EB 8546-1 EN Edition March 2010 Definition of the signal words used
More informationStandard Specifications
NARM, 2 Ways of Connection Small Size Pressure Gauge ø5mm Reverse flow function available on the standard model Space Saving -B2 NARM-6A-NG Standard Specifications Fluid Proof pressure psig (MPa) Max.
More informationType 4708 Supply Pressure Regulator
Type 478 Pressure Regulator Application pressure regulator used to provide pneumatic measuring and control equipment with a constant air supply Set point ranges. to.6 bar ( to 4 psi) or. to 6 bar (8 to
More informationType 4708 Supply Pressure Regulator
Type 708 Pressure Regulator Application pressure regulator used to provide pneumatic measuring and control equipment with a constant air supply Set point range 0.5 to bar (8 to 90 psi) The pressure regulator
More information1000/13.02 KOBSERT. Thread inserts for metals
1000/13.02 KOBSERT Thread inserts for metals Contents KOBSERT Thread inserts for metals Page The principle 3 The benefits 3 Product types 3 Applications in the Automotive and General industry 4 Technical
More informationPressure Reducing Valve DMV 750 set range: bar
Pressure Reducing Valve DMV 750 set range:.0-6.0 bar Advantage pressure setting possible at any time, also during operation hermetically sealed by valve diaphragm high level of operating safety and long
More informationVite Screw M8x55 4
AXD Alluminio / Alluminum 300 RPM E VERSION Ø5/8 72 73 7 75 71 23 22 2 70 7 33 3 35 37 3 38 3 0 2 1 12 1 21 1 18 17 1 25 28 2 30 31 32 5 3 8 10 7 8 50 51 52 80 8 5 53 5 55 G VERSION Ø3/ 81 82 83 8 85 5
More informationType 4708 Supply Pressure Regulator
Type 478 Pressure Regulator Application pressure regulators used to provide pneumatic measuring and control equipment with a constant air supply Set point ranges. to. bar ( to 4 psi). to bar (8 to 9 psi)
More informationINSTALLATION INSTRUCTIONS. CVS 67CFR Pressure Reducing Instrument Supply Regulator INTRODUCTION
INSTALLATION INSTRUCTIONS CVS 67CFR Pressure Reducing Instrument Supply Regulator INTRODUCTION The CVS Controls 67CFR Filter regulator is a pressure reducing supply regulator typically used for pneumatic
More informationTechnical information for hinges
451 452 Technical information for hinges In the tables on the following pages are listed a large range of hinge variations. Many more variations are possible if hinges with guide tabs are required i.e.
More informationDescription Supply pressure Pressure range Connection Device Page max. bar bar thread
Pressure Regulators Supply pressure Pressure range onnection Device Page max. bar bar thread Maxi -Series, robust, interlockable 1 0. 1.8 / 17 G¼ - G1 R0, R1.0 made of plastic, also for liquids 1,5 0 4
More informationDirectional Control Valves Series VA13 and VA15 3- and 5-port valves, G1/8
Directional Control Valves Series VA13 and VA15 3- and 5-port valves, G1/8 Catalogue 9127003472GB-ul VA13 and VA15 Directional Control Valves Robust 3- and 5-port valves with brass bodies and stainless
More informationDirect Operated Precision Regulator Modular Style. Standard Specifications
1 Direct Operated Precision Regulator Modular Style Series P3 Courtesy of Steven Engineering, Inc.-23 Ryan Way, South San Francisco, CA 948-637-Main Office: (65) 588-92-Outside Local Area: (8) 258-92-www.stevenengineering.com
More informationProduct Range. Product Range
Product Range Product Range EXCELLENT SOLUTIONS FOR COMPRESSED AIR With more than 30 years experience in pneumatic field, Aignep is an Italian leading manufacturer of compressed air elements. Aignep is
More informationPressure relief valve DHV 712 DN 65-80: 0,5-10 bar, DN : 0,3-4 bar, DN 100: 0,5-6 bar
Pressure relief valve DHV 7 DN 5-80: 0,5-0 bar, DN 5-00: 0, - bar, DN 00: 0,5 - bar Advantage for high pressure stability reliable reduction of pressure peaks and pulsations pressure setting possible at
More informationARI-DP32 / DP33 / DP34 / DP34T / DP34Tri / DP35 Pneumatic actuator ARI-DP
ARI-DP32 / DP33 / DP34 / DP34T / DP34Tri / DP35 ARI-DP32 / DP33 Pneumatic actuator Page 2 DP-Actuator Extended stem on air failure ARI-DP34 Pneumatic actuator Page 2 ARI-DP34T Pneumatic actuator Page 6
More informationBall Valves Gemels GE3 3-WAY HIGH PRESSURE BALL VALVES. Type and way of valve GE3 3-way high pressure ball valves
Carbon Steel Ball Valves Gemels 7.1.1 GE3 3-WAY HIGH PRESSURE BALL VALVES GE3 carbon steel GE3 G 1/2 DN13 1 1 1 1 A B Type and way of valve GE3 3-way high pressure ball valves Valves dimension of inch
More informationPressure Reducing Valve DMV 755
Pressure Reducing Valve DMV 755 Nominal size DN 10 50 Nominal size 3/8 2 Nominal pressure PN 10 bar Features pressure setting range 1 to 9 bar control valve for reliable reduction of system pressures to
More informationMasoneilan* 78 Model Air Filter Regulator
GE Oil & Gas Masoneilan* 78 Model Air Filter Regulator Instruction Manual [Rev. D] GE Data Classification : Public THESE INSTRUCTIONS PROVIDE THE CUSTOMER/OPERATOR WITH IMPORTANT PROJECT-SPECIFIC REFERENCE
More informationVRX Alluminio / Alluminum
VRX Alluminio / Alluminum 1 3625 0051 Vite Screw 4 15 5026 0260 Kit Pistone Piston Kit 3 2 3002 0553 Supporto Support 1 16 1802 0213 Molla Ritorno Pistone Piston Spring 3 4 03 0150 Carter Pompa Pump Crankcase
More information2-jaw self-centering pneumatic parallel gripper (series SX)
SX 2-jaw self-centering pneumatic parallel gripper (series SX) Double acting (normally closed on request). High gripping force. Protection class: IP67. Double O-Ring sealing on the columns. Suitable for
More informationALUMINIUM TANK AND COMPENSATOR - SERIES 09
ALUMINIUM TANK AND Series 09 has been extended with the addition of an air/oil compensator. The Ø100 air/oil compensator consists of two aluminium flanges and an anodized jacket with an ISO profile, all
More informationMounting and Operating Instructions EB EN. Type Supply Pressure Regulator. with increased air capacity
Type 4708-45 Supply Pressure Regulator with increased air capacity Translation of original instructions Mounting and Operating Instructions EB 8546-1 EN Edition March 2016 Note on these mounting and operating
More informationTEC 1/2 3/4 DN A B C 32,25 32,25 F Kg/cm 2 bar LBS - psi
360 A B F F C 1/2 3/4 DN 15 20 A 60 60 B 93 93 C 32,25 32,25 F 12 12 Kg/cm 2 bar 15 15 LBS - psi 218 218 360 10 9 8 7 6 5 11 12 13 1 2 3 4 Pos. DESCRIZIONE / DESCRIPTION Qt. MATERIALE / MATERIAL 1 Corpo
More informationKit Raccordo Asp. Chem. Coupling Kit 1
# CODIGO DESCRIPCION OBSERVACIONES PRECIO 1 1210005600 Guarnizione OR O-Ring Ø2,62x9,13 1 0.37 2 3202025300 Tappo Plug 1 1.31 3 3021003100 Spina Elastica Elastic Pin 4x24 1 0.29 4 1802018000 Molla Spring
More informationTYPE 2800E EXTERNALLY MOUNTED, GAS LUBRICATED, NON-CONTACTING, DOUBLE CARTRIDGE SEAL
A Seat/Mating Ring B Face/Primary Ring (inboard) C Spring D Face/Primary Ring (outboard) E O-Ring F Drive Collar G Setting Ring H Sleeve TYPE 2800E B A D C H E Spiral Groove Technology G F Product Description
More informationMounting and Operating Instructions EB 8546 EN. Supply Pressure Regulator Type Fig. 1 Supply pressure regulators
Supply Pressure Regulator Type 4708 Type 4708-5352 on Type 3730 Positioner Type 4708-52 with filter receptacle Type 4708-6252 on Type 3372 ctuator Fig. Supply pressure regulators Mounting and Operating
More informationPressure and Flow Control Valves DBGM, German and European Patents
Pressure and Flow Control Valves DBGM, German and European Patents Absolutely Reliable Pressure and Flow Control In water mains of sizes DN 50 to DN 150, ERHARD Control Valves in straight or angle pattern
More informationDiscontinued. Powers Controls. Technical Instructions Document No P25 RV Rev. 1, May, RV 201 Pressure Reducing Valves.
Powers Controls RV 201 Pressure Reducing Valves Description Features Product Numbers Dual Pressure PRV Technical Instructions Document No. 155-049P25 RV 201-1 Single Pressure PRV The RV 201 Pressure Reducing
More informationRR 16 Commercial & Industrial Regulator
RR 16 Commercial & Industrial Regulator The RR 16 regulator is designed for industrial use: gas supply networks, district stations, industries, heating plants, as well as for all installations where accurate
More informationIndex Table. Model 794. Installation, Operating and Maintenance Instructions
CLOCKWISE MANUAL MAKING INTO CCW TABLE Index Table Model 794 Installation, Operating and Maintenance Instructions Black & Webster Products Division 545 Hupp Ave. P.O. Box 831, Jackson, Michigan 49204 2009
More informationSeries Way Ball Valve Threaded. SERIES 38 3-Way. Easy to Automate! See automated data sheets for pre-sized assemblies 38-TH-0025-XXX-T
This investment cast 3-way valve can be an economical option for flow patterns that normally require multiple 2-way valves. Available in L or T port configurations, this valve is excellent for diverting
More informationGripTight Isolation Plug Test Plug Standard Sizes
GripTight Isolation Plug Test Plug Standard s PAGE 1 OF 9 PIPE SIZE SCH 5 10 20 30 40 60 80 100 120 140 160 XXS 3/4" GTDBB 075P5 GTDBB 075P10 N/A N/A GTDBB 075P40 N/A GTDBB 075P80 N/A N/A N/A GTDBB 075P160
More informationK13.12 FACE FIXED PANIC EXIT DEVICE K13 DOORS
K13 DOORS K13.12 FACE FIXED PANIC EXIT DEVICE 01.03.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Base set n
More informationSize : Ends : Min Temperature : Max Temperature : Materials : Cast iron EN GJL 250 body. Reinforced lug for DN200 :
Reinforced lug for DN200 : Size : Ends : Min Temperature : Max Temperature : DN 50 to 200 mm Between flanges ISO PN10/16 ( PN10 for DN200 ) - 10 C + 110 C Max Pressure : 10 Bars Specifications : Long neck
More informationRR 16 Commercial & Industrial Regulator
Gas RR 16 Commercial & Industrial Regulator Applications The RR 16 regulator is designed for industrial use: gas supply networks, district stations, industries, heating plants, as well as for all installations
More informationDS06D,G Dial Set Pressure Regulating Valve
DS06D,G Dial Set Pressure Regulating Valve PRODUCT DATA FEATURES APPLICATION Built-in, factory-calibrated outlet pressure adjustment dial. Noncorroding unitized cartridge contains all working parts and
More informationComponents for air preparation and pressure adjustment. OUT port position ( ) connected Rear side. of IN port. Air tank. directly.
Components preparation and pressure adjustment ABP Overview ABP is a component that enables boosting by s only up to twice primary pressure (.0MPa max.) in combination with using air tank but not using
More informationshutoff valves 900 Series psig Manual Shutoff Valves
0 6000 psig Manual Shutoff Valves Features Zero leakage Protected o-ring Full flow passages Freedom from wire drawing Panel mount standard Hand wheel or toggle handle How it Works Closed O-ring seal on
More informationSCH-27. Diaphragm Pressure Switch. Setting range: mbar to bar. Temperature: max C. Material: stainless steel
Diaphragm Pressure Switch measuring monitoring analysing SCH-27 P3 Setting range: 0.7... 6 mbar to 8... 160 bar Temperature: max. +100 C Material: stainless steel Connection: G ½ male, ½" NPT male, ¼"
More information1800CPB2 Service Regulators Maximum Inlet Pressure 125 PSIG
A C E D SB-8520.2 1800CPB2 Service Regulators Maximum Inlet 125 PSIG AMC Quality System QMI is Accredited by: C R E D I T ISO 9001 Certified Certificate #006697 R E ANSI RAB G I S T R A R Dutch Council
More informationSPG. Application example. Pneumatic 2-Finger Parallel Gripper Heavy-load Gripper. Weight 35 kg. Stroke per finger 100 mm.
SPG Size 100 Weight 35 kg 10,000 N Stroke per finger 100 mm Workpiece weight 50 kg Application example Gripper unit for heavy V8 engine blocks. SPG 100 2-Finger Heavy-load Gripper 446 www.schunk.com SPG
More informationPressure relief valve DHV 716 set range: 0,5-10,0 bar
Pressure relief valve DHV 7 set range: 0,5-0,0 bar Advantage pressure setting possible at any time, also during operation optimum monitoring valves high reproducibility of the set pressure high level of
More informationPressure-Relief Cartridge Valve, Size 4
Pressure-Relief Cartridge Valve, Size 4 Q max = 30 l/min, p max = 420 bar Seated design, direct acting, with mechanical operation Compact construction for cavity type AL 3/4-16 UNF High flow rates 7 pressure
More informationPressure Reducing Valve DMV 755 set range: 1,0-9,0 bar
Pressure Reducing Valve DMV 755 set range:,0-9,0 bar Advantage pressure setting possible at any time, also during operation high reproducibility of the set pressure high level of operating safety and long
More informationTelefon (+45) Telefax (+45)
Uni-Valve A /S VENTILER & INSTRUMENTER Telefon (+45) 43 43 82 00 Telefax (+45) 43 43 74 75 mail@uni-valve.com www.uni-valve.com UNI-S83 / S84 3/4-way ball valve Installation and Operating manual 3/4-WAY
More informationBall valve HKSF-W100. Ball valve HKSF-W100. RMA Kehl GmbH & Co. KG Oststrasse 17 D Kehl / Germany
Ball valve HKSF-W100 RMA Kehl GmbH & Co. KG Oststrasse 17 D-77694 Kehl / Germany info@rma-kehl.de www.rma-armaturen.de 1 Design Features: RMA-ball valves type HKSF-W are fully welded and completely maintenance-free
More informationSECTION BUTTERFLY VALVES
SECTION 15112 BUTTERFLY VALVES PART 1 GENERAL 1.01 SUMMARY A. All butterfly valves shall be of the tight closing, rubber seated type and fully comply with the latest revision of AWWA Standard C504, Class
More informationInstallation Instructions, Pressure Regulator Series
Installation Instructions, Pressure Regulator 20517 Series Manual Model: 20517, L20517 Air motor Operated: F20517, LF20517 Hydraulic Motor Operated: G20517, LG20517 1. GENERAL ------------------------------------------------------------------------------
More informationPressure Dump Valve Service Kit for Series 3000 Units
Instruction Sheet Pressure Dump Valve Service Kit for Series 000 Units. Overview The Nordson pressure dump valve is used to relieve hydraulic pressure instantly in Series 00, 400, 500, and 700 applicator
More informationAREA TOTALS OECD Composite Leading Indicators. OECD Total. OECD + Major 6 Non Member Countries. Major Five Asia. Major Seven.
Reference series Composite leading indicators OECD Composite Leading Indicators AREA TOTALS 7-03- 19 OECD Total 19 OECD + Major 6 Non Member Countries 19 Major Seven 19 Major Five Asia 19 Euro area 19
More informationSSV-Actuator HON 673 (K 1a, K 2a)
SSVActuator HON 673 ( 1a, 2a) 673.20 OPERATING AND MAINTENANCE INSTRUCTIONS/ SPARE PARTS EDITION 01/2017 Serving the Gas Industry orldwide 1. General Our leaflet 720.00 gives full information with technical
More informationDual position solenoid valve Type ICSH 25-80
Data sheet Dual position solenoid valve Type ICSH 25-80 ICSH dual position solenoid valve belongs to the ICV family and consists of an ICV housing, an ICS insert together with an ICSH top cover with 2
More informationSingle and double acting, magnetic, self-centering Bores: ø 16, 20, 25, 32, 40 mm
> Series CGPT self-centering parallel grippers with T-guide Series CGPT self-centering parallel grippers with T-guide Single and double acting, magnetic, self-centering Bores: ø 6, 20, 25, 32, 40 mm New
More informationSeries CGZT three-jaw grippers with T-guide
Series CGZT three-jaw grippers with T-guide New Single and double acting, magnetic, self-centering Sizes: 40, 50, 64, 80, 100, 125, 160 mm The new Series CGZT pneumatic grippers, thanks to the use of a
More informationOPERATING INSTRUCTIONS & SERVICE MANUAL
OPERATING INSTRUCTIONS & SERVICE MANUAL Steamaster 6 Reservoir Avenue Greenacre Sydney NSW 2190 Australia Tel: 1300 855 677 Tel: +61 2 9796 3433 Fax: +61 2 9796 3395 www.steamaster.com.au 5 1 5 Steamaster
More informationSeries C8/CR Cryogenic
Triac C8/CR Series 3-Piece Ball feature a direct mount automation pad. The high quality investment castings feature a fully machined bore. The superior live loaded packing system is accomplished with Belleville
More informationAWWA C504 COMPLIANT VALVES FROM 3 THRU 108
AWWA C504 COMPLIANT VALVES FROM 3 THRU 108 PO Box 411 Berwick PA 18603 800-247-VALV www.crispinvalve.com 500 SERIES: Sizes 3-20 Available The K-Flo 500 Series is a heavy-duty resilient seated butterfly
More informationPlummer Block Housings
Plummer Block Housings TECHNICAL INFORMATION Feature The majority of SLB Plummer Block Housing is made of Gray Cast Iron and is of the models of 'SN', 'SNU' and 'SAF'. Its basic size conforms with 'ISO'
More informationPneumatic Powered - Plunger Pumps
Models 42/62/82 D Series P.O. Box 80769 Lafayette, LA 70598-0769 (337) 235-9838 FAX (337) 235-9852 www.sidewinderpumps.com Pneumatic Powered - Plunger Pumps Suggested Installation & Operating Instructions
More informationOperation and Maintenance, Spare Parts Serving the Gas Industry - WORLDWIDE. edition 06/2005
Gas Pressure Regulator RMG 502a Operation and Maintenance, Spare Parts 502.20 edition 06/2005 Serving the Gas Industry - WORLDWIDE Contents page 1. General Remarks 3 1.1 Safety Instructions 3 2. Special
More informationVESSEL & REACTOR VALVES. VS Series SPRAY & RINSE VALVES PROCESS VALVES
VS Series VESSEL & REACTOR VALVES SPRAY & RINSE VALVES PROCESS VALVES CLEANING VESSELS OR REACTORS WITHOUT OPENING TO ATMOSPHERE Spray & Rinse Valves Code: VRR-VRS Automatic models use an electric or air
More informationPressure relief valve DHV 718
Pressure relief valve DHV 78 Benefits diaphragm controlled pressure relief valve with piston guidance simple design, reliable function particularly suitable for oscillating pumps constant, frictionless
More informationMounting and Operating Instructions EB 3007 EN. Self-operated Pressure Regulators. Differential Pressure Regulators (opening) Type Type 42-25
Self-operated Pressure Regulators Differential Pressure Regulators (opening) Type 42-20 Type 42-25 Type 42-20 Differential Pressure Regulator Type 42-25 Differential Pressure Regulator Mounting and Operating
More informationPNEUMATIC PRESSURE CONTROLLERS
PNEUMATIC PRESSURE CONTROLLERS VARIABLE VOLUME PRESSURE CONTROLLER MODELS: V-1 R AND V-2R The 3D Variable Volume Pressure Controller is available for requirements of 0-1,000 psi and 0-6,000 psi in absolute
More informationR123 R123/34 brass. Brass pressure regulator, for compressed air, gas and liquid
R123 R123/34 brass Brass pressure regulator, for compressed air, gas and liquid FEATURES Pressure regulator for inlet pressure up to 50 bar (725 psi) in the standard version. Connection ports. R123 1 -F
More informationPressure Dump Valve Service Kit for Series 2300 Units
Instruction Sheet Pressure Dump Valve Service Kit for Series 00 Units. Overview The Nordson pressure dump valve is used to relieve hydraulic pressure instantly in Series 00 applicator tanks when the unit
More informationPressure relief valve DHV 725 set range: 0,2-10,0 bar
Pressure relief valve DHV 75 set range: 0, - 0,0 bar Advantage pressure setting possible at any time, also during operation optimum monitoring valves high reproducibility of the set pressure high level
More informationV5197A. Firing Rate Gas Valve APPLICATION FEATURES PRODUCT HANDBOOK
V5197A Firing Rate Gas Valve PRODUCT HANDBOOK APPLICATION The V5197A are firing rate valves used to provide variable flow control of air, natural gas, liquefied petroleum (LP), and manufactured gases.
More informationHand-operated regulating valves in stainless steel Types REG-SA SS and REG-SB SS
Data sheet Hand-operated regulating valves in stainless steel Types REG-SA SS and REG-SB SS In certain specific areas such as outdoor applications and corrosive atmospheres, such as coastal installations,
More informationFlanged pressure reducer/stabilizer VRCD
Flanged pressure reducer/stabilizer VRCD 2 This unit reduces and stabilizes the upstream pressure by operating on its load losses with a constant downstream pressure irrespective of the rate of flow value.
More informationHigh Pressure Cylinder Valves
High Cylinder Valves CBA series Commercial and POL Style Acetylene Cylinder Valves O-Ring seal type 8 CBO series Vertical Outlet Acetylene Valve with Handwheel for Collar Style Cylinders 9 CBH/CBI series
More informationParts List for Type S Flowmeters
P101 Rev. C Type S Flowmeter Parts List: 5/8" 2" Type S Flowmeters Parts List for Type S Flowmeters 5/8" and 3/4" Type S Flowmeters with 100 and 600 Series Register and Internal Gear Train 28 3.0, 3.1
More informationType 4660 High-Low Pressure Pilot
Product Bulletin Type 4660 High-Low Pressure Pilot The Type 4660 pneumatic high-low pressure pilot (figure 1) activates safety shutdown systems for flowlines, production vessels, and compressors. This
More informationCFC2. Float Control For Closed Tanks MODEL. Specifications. Dimensions (In Inches) Reservoir Connection 1" NPT (Typ. Both Ends 2 Places)
MODEL Float Control For Closed Tanks Accurate Liquid Level Control Fully Hydraulic Operation Simple Design, Easy Maintenance No Lubrication Necessary No Gears, No Mechanical Linkage Between Valve and Control
More informationWide opening parallel grippers Series CGLN
CATALOGUE > s 202 Wide opening parallel grippers Series CGLN > Grippers Series CGLN Magnetic Sizes: ø 0-6 - 20-25 - 32 mm» High flexibility during mounting» High grip force» Rack and pinion synchronized
More informationMounting and Operating Instructions EB 8546 EN. Type 4708 Supply Pressure Regulators. Translation of original instructions. Type Type
Type 4708 Supply Pressure Regulators Translation of original instructions Type 4708-53 Type 4708-64 Type 4708-12 Mounting and Operating Instructions Edition March 2018 Note on these mounting and operating
More informationBALL VALVE ASSEMBLY AND MAINTENANCE PROCEDURE. REF. DOC.MMM900N Rev.1 March 2014 SERIES M DIN / ANSI. Page 1 of 17
SERIES M DIN / ANSI Page 1 of 17 REVIEW CONTROL PROCEDURE REF.DOC.MMM900N REV. DATE CARRIED OUT BY APPROVED BY DESCRIPTION 0 12/05/2013 E.Hidalgo J.Tejedor Initial Edition 1 27/03/2014 D.Grau J.Tejedor
More informationPressure Relief Valve DHV 718
Pressure Relief Valve DHV 718 Nominal size DN 8 50 Nominal size 3/8 2 Nominal pressure PN 10 bar Features pressure setting range 0.5 to 10 bar diaphragm controlled pressure relief valve simple design,
More informationSection GATE VALVES
Section 02521 PART 1 GENERAL 1.01 SUMMARY This Section includes the furnishing and installation of gate valves for isolation and dead-end service as shown on Plans and as specified herein. 1.02 MEASUREMENT
More informationMeter, PD Series, E3 S6, S7 All Parts List
Issue/Rev. 0.0 (3/13) Meter, PD Series, E3 S6, S7 All Parts List Bulletin PO01005 32 68 29 17 68 16 14 19 15 68 20 54 22 18 24 58 23 10 59 41 31 56 55 57 47 52 25 27 34 34 26 40 67 44 39 The Most Trusted
More informationSolenoid valves, two-step on/off Type PMLX REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Solenoid valves, two-step on/off PMLX REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction........................................................................................3
More informationPressure Sensing Valve - Model 4023
Pressure Sensing Valve - Model 4023 Overview AMOT Model 4023 can be used as a 2 or 3-way capacity, pressure sensing valve. This valve is ideal for applications that require compressor suction and discharge
More informationAir Saving Valve. Series ASQ. Series ASR. Pressure Valve. Flow valve TMH ASD AS AS-FG AS-FP AS-FM ASP ASN AQ ASV AK VCHC ASS. r r AS-FE KE 10 0.
Air Saving Valve Series R Pressure Valve Series Q Flow Valve P r.9.7 2..3.1 D -FE KE -FG -FP -FM.1.2.2.3 pressure (MPa) -D -T P ow valve Fl N AQ V e n by o i t p nsum n stroke o c r i r a Cuts g the retu
More informationPressure booster. Air Service Units Series Page. General 5.1. Pressure boosters ø Pressure boosters ø 40 c/w air pressure regulator 5.
Series 17 Pressure booster Page General Pressure boosters ø 4 Pressure boosters ø 4 c/w air pressure regulator Pressure booster ø 63 Pressure booster ø 63 c/w air pressure regulator Pressure booster ø
More informationAVK SERIES 601, 602, 603 & 605 UNIVERSAL COUPLINGS, ADAPTORS & END CAPS INSTALLATION, OPERATION & MAINTENANCE MANUAL
Instruction for use Thank you for selecting an AVK product. With correct use, the product is guaranteed to deliver a long and reliable service. This manual has been prepared to assist you with the installation,
More information180 Series Rotary Shear Directional Control Valve
180 Series Rotary Shear Directional Control Valve Up to l 38 lpm, 10 US gpm l 700 bar, 10,000 psi Milwaukee, WI 53235, US el: +1 (414) 769-6400 sales-us@webtec.com St. Ives, Cambs. E27 3LZ, UK el: +44
More informationSeries 4 Cv= Air-Pilot operated valves. 3-way/2-position, 5-way/2-position, 5-way/3-position
3 Cv =.73-2.00 Series 4 Cv=.73-2.00 Air-Pilot operated valves Series 4: 1/8,, 3-way/2-position; 5-way/2-position; 5-way/3-position 1/2 5-way/2-position The pneumatically operated,3-way/2-position, 5-way/2-position
More informationInstallation, operation & maintenance manual - original version
Installation, operation & maintenance manual - original version AVK gate valves for water and wastewater Series 01, 02, 06, 12, 15, 18, 20, 26, 32, 33, 36, 38, 50, 55 and 636 COPYRIGHT AVK GROUP A/S 2018
More informationRef GAS WAFER BUTTERFLY VALVE. Model/Ref:
Model/Ref: 1141 www.lauridsenindustri.com Size : Ends : Min Temperature : Max Temperature : DN 32/40 to 200 mm Between ISO PN10/16 and ANSI150 flanges - 20 C + 60 C Max Pressure : 5 Bars Specifications
More informationR300 HELYON. Brass high pressure regulator, for compressed air, gas and liquids
HELYON 5 Chemin du Jubin 69570 DARDILLY Tél. +33 (0)4 72 52 16 70 - Fax +33 (0)4 72 52 16 71 R300 Brass high pressure regulator, for compressed air, gas and liquids FEATURES Pressure regulator for inlet
More information670 Series Panel-Mounted Loading Regulators
November 1992 Bulletin 62.3:670 670 Series Panel-Mounted Loading Regulators The Types 670, 6, 674, and 675 panel-mounted loading regulators (figures 1, 2, 3 and 6) are compact, rugged units used primarily
More informationPower Valve: Precision Regulator. High precision, large capacity relief regulator
Power Valve: Precision Regulator Series VEX High precision, large capacity relief regulator port large exhaust capacity pressure reducing valve which utilizes a nozzle flapper mechanism available as air
More informationA soft sealed atmospheric safety valve with large flow capacity and soft seat tightness for steam condenser and turbine applications
SAPAG A soft sealed atmospheric safety valve with large flow capacity and soft seat tightness for steam condenser and turbine applications Features The Sapag Series 1100 steam safety valve is used for
More informationMeter, PD Model T-11 and T-11NF Parts List
Form No. P0565.11 Meter, PD Model T-11 and T-11NF Parts List Issue/Rev. 1.1 (9/11) Bulletin P0565.11 The Most Trusted Name In Measurement Item G Description Calibrator Version Qty. Part Number Item Description
More information