Certificate No.: 2531 CPR CSC10016 Issue date:

Transcription

1 CERTIFICATE OF CONSTANCY OF PERFORMANCE Issued by DBI Certification, notified body No In compliance with Regulation 305/2011/EU of the European Parliament and of the Council of 9 March 2011 (the Construction Products Regulation or CPR), this certificate applies to the construction product Gallows with mounted signboards type BS Scope: Fixed vertical road traffic signs (ZA.6) The product fulfils the essential characteristic: See Annex 1 Intended use: Complete assemblies of fixed vertical road traffic signs, to be mounted at the top of a straight steel pipe Placed on the market under the name or trade mark of: Saferoad Daluiso A/S Hvidkærvej Odense SV Danmark and produced in the manufacturing plant: CPA30003 This certificate attests that all provisions concerning the assessment and verification of constancy of performance described in Annex ZA of the standards EN :2007 : Fixed, vertical road traffic signs-part 1: Fixed signs under system 1 for the performance set out in this certificate are applied and that the performance of the construction product is assessed to remain constant. The attached annexes form part of this certificate. Date of issue: This certificate will remain valid as long as neither the harmonized standard, the construction product, the AVCP methods nor the manufacturing conditions in the plant are modified significantly unless suspended or withdrawn by the notified product certification body. This certificate was first issued Per Lyster Responsible for evaluation Merete Poulsen Responsible for certification decision Tlf.: Page 1 of 7

2 Annex 1 Description and classification: Sign sizes are maximum sizes (Ø, h and w) Sizes of signboards and different types of gallows Pipes: Minimum steel quality: S235 in dimension Ø48,3 x 2,9, Ø48,3 x 3,0 and Ø48,3 x 3,2 mm Minimum aluminum quality: R p0,2 = 180 MPa, min. 2 mm thickness Classification according to wind load classes Placed in WL1 Placed in WL2 Placed in WL3 TDB1, TDT5 and - TDB1, TDT4, and Tlf.: Page 2 of 7

3 - TDB1, TDT3 and TDB2, TDT5 and DSL0, PL0, TDB3, TDT0, P2, E1 and 600 x 700 mm TDB3, TDT5 and 600 x 700 mm TDB3, TDT6 and SP1 - Tlf.: Page 3 of 7

4 Fixings: Pass. The signs, sizes and gallows are intended for mounting at the top of another straight steel pipe. Together the gallows and the straight steel is the support for the sign. Performance under vehicle impact Visibility Retroreflective signs: Daylight chromaticity & luminance factor To be declared on the support Value/description/ class/reference Pass, ETA 16/0006, Class CR2 Pass, ETA 13/0304 Pass, ETA 11/0426, Pass, ETA 11/0427 Pass, ETA 12/0550 Pass, ETA 10/0118 Pass, ETA 11/0522 Pass, ETA 11/0521 Pass, ETA 13/0303 Non retroreflective signs: Daylight chromaticity & luminance factor Tlf.: Page 4 of 7

5 Retroreflective signs: Coefficient of retroreflection R A External illumination mean illuminance, uniformity of illuminance Durability Impact resistance Sign face material ETA 16/0006 Class RA1 Class RA2, ETA 13/0304 Class RA2, ETA 11/0426 Class RA2, ETA 11/0427 Class RA1, ETA 12/0550 Class RA1, ETA 10/0118 Class RA1, RA2, ETA 11/0521, ETA 11/0522, ETA 13/0303 Value/description /class Value/description /class Pass, ETA 16/0006 npd pass, ETA 13/0304 pass, ETA 11/0426 pass, ETA 11/0427 Pass, ETA 12/0550 Pass, ETA 10/0118 Pass, ETA 11/0521 Pass, ETA 11/0522 Pass, ETA 13/0303 Tlf.: Page 5 of 7

6 Resistance to weathering sign face material: Retroreflective signs Corrosion resistance Steel pipes and fins Screws, nuts and washers Aluminum plate Resistance to penetration of dust and water Pass, ETA 16/0006 Pass, ETA 13/0304 Pass, ETA 11/0426 Pass, ETA 11/0427 Pass, ETA 12/0550 Pass, ETA 10/0118 Pass. ETA 11/0521 Pass, ETA 11/0522 Pass, ETA13/0303 Value/description/ class/reference SP1 The pipe and fins are after manufacturing hot dip galvanized to a minimum of 60µm SP2 Minimum A2, Class 70 SP1 Lacquered Al-plate on back side 3M primer on front side The product can not be provided with compartments for electrical equipment Tlf.: Page 6 of 7

7 Annex 2 TECHNICAL BASIS File number Title Date None Saferoad Daluiso A/S Calculation of minor traffic signs (ITC) Type BS, upper part Ø48,3 x 2,9, Ø48,3 x 3,0, and Ø48,3 x 3.2 mm steel pipes. 3M Advanced Engineer Grade : ETA 16/0006 September M Engineering Grade 3290 I: 0913-CPD-2007/ ETA 13/ ETA 11/ ETA 11/ : ETA 10/ ETA 12/ : ETA 11/ ETA 11/ ETA 13/ Tlf.: Page 7 of 7