NEW Dual Certified Ex d & Ex e UNIONS Multi Angle Unions for Explosive Atmospheres CMP PRODUCTS

Transcription

1 NW ual Certified x d & x e UNIONS Multi Angle Unions for xplosive Atmospheres CMP PROUCTS

2 780 SRIS Inline Union Union Type 780 with lameproof x d IIC & Increased Safety x e II forms of protection. The CMP Type 780 Metallic Union is designed to allow connection of rigid and flexible conduit, or terminated Cable Glands, to any fixed equipment. The 780 Union provides a running connection by means of an integral coupling arrangement that eliminates the need to rotate the conduit, or cable, or equipment to achieve a correct termination. The ease of installation offered by the 780 Union consequently makes the process of removing the conduit or other terminated cable entry device from the equipment a simple, fast and effective one. Available in rass, lectroless Nickel Plated rass, Aluminium or Stainless Steel these Unions are approved for use in conjunction with Class I, iv 1 and 2, x d and x e certified equipment and cable entry devices, and can also be supplied with thread conversion between the forward and rear threads to either a reduced size or a variety of different thread types, e.g. Metric to, or to metric. Type 780 II 2 G x d IIC Gb, x e IIC Gb, x ta IIIC a IP6X x d IIC Gb, x e IIC Gb, x d I Mb, x e I Mb, x ta IIIC a IP6X Class I, iv 1 & 2, Groups A,,C, ; nclosure type 4X : Class I, Zone 1, TC C-G.ГБ x d IIC Gb U, x e IIC Gb U, x ta IIIC a U C A A General Purpose Industrial version is also available. Available with an integral O Ring seal. or such options please add above, e.g. 780RM2M2. NPSI Certificate GYJ X x d IIC Gb G3836.1,2,3-60 C to +200 C rass (standard), lectroless Nickel Plated rass, Aluminium, Stainless Steel (rass, Metric) MTRIC orward A emale (rass, ) orward emale ore iameter C lats Hex Ø 780M2M2 M20 X M20 X T1T1 1/ / M3M3 M25 X M25 X T2T2 3/ / M4M4 M32 X M32 X T3T M5M5 M40 X M40 X T4T4 1-1/ / M6M6 M50 X M50 X T5T5 1-1/ / M7M7 M63 X M63 X T6T M8M8 M75 X M75 X T7T7 2-1/ / M9M9 M90 X M90 X T8T or material options please add the following suffix to the ; rass (no suffix required), Nickel Plated rass 5, 316 Grade Stainless Steel 4, Copper ree Aluminium 1

3 PX780RX SRIS Inline arrier Union *Ordered seperately arrier Union Type PX780RX with lameproof x d IIC & Increased Safety x e II forms of protection. The CMP Type PX780RX Rapidx Metallic arrier Union is designed to allow connection of rigid and flexible conduit, or terminated Cable Glands, to any fixed equipment. The PX780RX Union provides a running connection by means of an integral coupling arrangement that eliminates the need to rotate the conduit, or cable, or equipment to achieve a correct termination. Type PX780RX II 2 G x d IIC Gb, x e IIC Gb, x ta IIIC a IP6X C A The PX780RX also incorporates a barrier compartment. The ease of installation offered by the PX780RX arrier Union consequently makes the process of removing the conduit or other terminated cable entry device from the equipment a simple, fast and effective one. Available in rass, lectroless Nickel Plated rass, Aluminium or Stainless Steel these arrier Unions are approved for use in conjunction with Class I, iv 1 and 2, x d and x e certified equipment and cable entry devices, and can also be supplied with thread conversion between the forward and rear threads to either a reduced size or a variety of different thread types, e.g. Metric to, or to metric. x d IIC Gb, x e IIC Gb, x d I Mb, x e I Mb, x ta IIIC a IP6X Class I, iv 1 & 2, Groups A,,C, ; nclosure type 4X : Class I, Zone 1, TC C-G.ГБ x d IIC Gb U, x e IIC Gb U, x ta IIIC a U Available with an integral O Ring seal. or such options please add above, e.g. PX780RXRM2M2. or epoxy compound version please remove RX from ordering reference -60 C to +85 C rass (standard), lectroless Nickel Plated rass, Aluminium, Stainless Steel (rass, Metric) MTRIC orward emale Size (rass, ) orward emale iameter Over Cores C. Number of Cores Postrusion lats Hex Ø PX780RXM2M2 M20 X M20 X 1.5 PX780RXT1T1 1/ / PX780RXM3M3 M25 X M25 X 1.5 PX780RXT2T2 3/ / PX780RXM4M4 M32 X M32 X 1.5 PX780RXT3T PX780RXM5M5 M40 X M40 X 1.5 PX780RXT4T4 1-1/ / PX780RXM6M6 M50 X M50 X 1.5 PX780RXT5T5 1-1/ / PX780RXM7M7 M63 X M63 X 1.5 PX780RXT6T PX780RXM8M8 M75 X M75 X 1.5 PX780RXT7T7 2-1/ / PX780RXM9M9 M90 X M90 X 2.0 PX780RXT8T or material options please add the following suffix to the ; rass (no suffix required), Nickel Plated rass 5, 316 Grade Stainless Steel 4, Copper ree Aluminium 1

4 784 SRIS 45 Union Union With 45 end Type 784 with lameproof x d IIC & Increased Safety x e II forms of protection. The CMP Type 784 Metallic Union is designed to allow connection of rigid and flexible conduit, or terminated Cable Glands, to any fixed equipment. The 784 Union provides a running connection at an angle of 45 by means of an integral coupling arrangement that eliminates the need to rotate the conduit, or cable, or equipment to achieve a correct termination. The ease of installation offered by the 784 Union consequently makes the process of removing the conduit or other terminated cable entry device from the equipment a simple, fast and effective one. Available in rass, lectroless Nickel Plated rass, Aluminium or Stainless Steel these Unions are approved for use in conjunction with Class I, iv 1 and 2, x d and x e certified equipment and cable entry devices, and can also be supplied with thread conversion between the forward and rear threads to either a reduced size or a variety of different thread types, e.g. Metric to, or to metric. A General Purpose Industrial version is also available. If 2 separate enclosures are required to be connected together please contact CMP Type 784 NPSI Certificate II 2 G x d IIC Gb, x e IIC Gb, x ta IIIC a IP6X x d IIC Gb, x e IIC Gb, x d I Mb, x e I Mb, x ta IIIC a IP6X C A G Class I, iv 1 & 2, Groups A,,C, ; nclosure type 4X : Class I, Zone 1, TC C-G.ГБ x d IIC Gb U, x e IIC Gb U, x ta IIIC a U GYJ X x d IIC Gb G3836.1,2,3 Available with an integral O Ring seal. or such options please add above, e.g. 784RM2M C to +200 C rass (standard), lectroless Nickel Plated rass, Aluminium, Stainless Steel (rass, Metric) orward MTRIC emale (rass, ) orward emale ore iameter C Overhang lats Hex Ø 784M2M2 M20 X M20 X T1T1 1/ / M3M3 M25 X M25 X T2T2 3/ / M4M4 M32 X M32 X T3T M5M5 M40 X M40 X T4T4 1-1/ / M6M6 M50 X M50 X T5T5 1-1/ / M7M7 M63 X M63 X T6T or material options please add the following suffix to the ; rass (no suffix required), Nickel Plated rass 5, 316 Grade Stainless Steel 4, Copper ree Aluminium 1

5 PX784RX SRIS 45 arrier Union *Ordered seperately arrier Union with 45 bend Type PX784RX with lameproof x d IIC & Increased Safety x e II forms of protection. The CMP Type PX784RX Metallic arrier Union is designed to allow connection of rigid and flexible conduit, or terminated Cable Glands, to any fixed equipment at a 45 angle. The PX784RX Union provides a running connection by means of an integral coupling arrangement that eliminates the need to rotate the conduit, or cable, or equipment to achieve a correct termination. The PX784RX also incorporates a barrier compartment. The ease of installation offered by the PX784RX arrier Union consequently makes the process of removing the conduit or other terminated cable entry device from the equipment a simple, fast and effective one. Type PX784RX II 2 G x d IIC Gb, x e IIC Gb, x ta IIIC a IP6X x d IIC Gb, x e IIC Gb, x d I Mb, x e I Mb, x ta IIIC a IP6X C A G Available in rass, lectroless Nickel Plated rass, Aluminium or Stainless Steel these arrier Unions are approved for use in conjunction with Class I, iv 1 and 2, x d and x e certified equipment and cable entry devices, and can also be supplied with thread conversion between the forward and rear threads to either a reduced size or a variety of different thread types, e.g. Metric to, or to metric. If 2 separate enclosures are required to be connected together please contact CMP Class I, iv 1 & 2, Groups A,,C, ; nclosure type 4X : Class I, Zone 1, TC C-G.ГБ x d IIC Gb U, x e IIC Gb U, x ta IIIC a U Available with an integral O Ring seal. or such options please add above, e.g. PX784RXRM2M2. or epoxy compound version please remove RX from ordering reference -60 C to +85 C rass (standard), lectroless Nickel Plated rass, Aluminium, Stainless Steel (rass, Metric) MTRIC orward emale Size (rass, ) orward emale Size iameter over Cores C. number of Cores Overhang lats Hex Ø PX784RXM2M2 M20 X M20 X 1.5 PX784RXT1T1 1/ / PX784RXM3M3 M25 X M25 X 1.5 PX784RXT2T2 3/ / PX784RXM4M4 M32 X M32 X 1.5 PX784RXT3T PX784RXM5M5 M40 X M40 X 1.5 PX784RXT4T4 1-1/ / PX784RXM6M6 M50 X M50 X 1.5 PX784RXT5T5 1-1/ / PX784RXM7M7 M63 X M63 X 1.5 PX784RXT6T or material options please add the following suffix to the ; rass (no suffix required), Nickel Plated rass 5, 316 Grade Stainless Steel 4, Copper ree Aluminium 1

6 789 SRIS 90 Union Union With 90 end Type 789 with lameproof x d IIC & Increased Safety x e II forms of protection. The CMP Type 789 Metallic Union is designed to allow connection of rigid and flexible conduit, or terminated Cable Glands, to any fixed equipment. The 789 Union provides a running connection at an angle of 90 by means of an integral coupling arrangement that eliminates the need to rotate the conduit, or cable, or equipment to achieve a correct termination. The ease of installation offered by the 789 Union consequently makes the process of removing the conduit or other terminated cable entry device from the equipment a simple, fast and effective one. Available in rass, lectroless Nickel Plated rass, Aluminium or Stainless Steel these Unions are approved for use in conjunction with Class I, iv 1 and 2, x d and x e certified equipment and cable entry devices, and can also be supplied with thread conversion between the forward and rear threads to either a reduced size or a variety of different thread types, e.g. Metric to, or to metric. A General Purpose Industrial version is also available. If 2 separate enclosures are required to be connected together please contact CMP Type 789 NPSI Certificate II 2 G x d IIC Gb, x e IIC Gb, x ta IIIC a IP6X x d IIC Gb, x e IIC Gb, x d I Mb, x e I Mb, x ta IIIC a IP6X Class I, iv 1 & 2, Groups A,,C, ; nclosure type 4X : Class I, Zone 1, TC C-G.ГБ x d IIC Gb U, x e IIC Gb U, x ta IIIC a U GYJ X x d IIC Gb C A G Available with an integral O Ring seal. or such options please add above, e.g. 789RM2M2. G3836.1,2,3-60 C to +200 C rass (standard), lectroless Nickel Plated rass, Aluminium, Stainless Steel (rass, Metric) orward MTRIC emale Size (rass, ) orward emale ore iameter C Overhang lats Hex Ø 789M2M2 M20 X M20 X T1T1 1/ / M3M3 M25 X M25 X T2T2 3/ / M4M4 M32 X M32 X T3T M5M5 M40 X M40 X T4T4 1-1/ / M6M6 M50 X M50 X T5T5 1-1/ / M7M7 M63 X M63 X T6T or material options please add the following suffix to the ; rass (no suffix required), Nickel Plated rass 5, 316 Grade Stainless Steel 4, Copper ree Aluminium 1

7 PX789RX SRIS 90 arrier Union *Ordered seperately arrier Union with 90 bend Type PX789RX with lameproof x d IIC & Increased Safety x e II forms of protection. The CMP Type PX789RX Metallic arrier Union is designed to allow connection of rigid and flexible conduit, or terminated Cable Glands, to any fixed equipment at a 90 angle. The PX789RX Union provides a running connection by means of an integral coupling arrangement that eliminates the need to rotate the conduit, or cable, or equipment to achieve a correct termination. The PX789RX also incorporates a barrier compartment. The ease of installation offered by the PX789RX arrier Union consequently makes the process of removing the conduit or other terminated cable entry device from the equipment a simple, fast and effective one. Type PX789RX II 2 G x d IIC Gb, x e IIC Gb, x ta IIIC a IP6X x d IIC Gb, x e IIC Gb, x d I Mb, x e I Mb, x ta IIIC a IP6X C A G Available in rass, lectroless Nickel Plated rass, Aluminium or Stainless Steel these arrier Unions are approved for use in conjunction with Class I, iv 1 and 2, x d and x e certified equipment and cable entry devices, and can also be supplied with thread conversion between the forward and rear threads to either a reduced size or a variety of different thread types, e.g. Metric to, or to metric. If 2 separate enclosures are required to be connected together please contact CMP Class I, iv 1 & 2, Groups A,,C, ; nclosure type 4X : Class I, Zone 1, TC C-G.ГБ x d IIC Gb U, x e IIC Gb U, x ta IIIC a U Available with an integral O Ring seal. or such options please add above, e.g. 7PX89RXRM2M2. or epoxy compound version please remove RX from ordering reference -60 C to +85 C rass (standard), lectroless Nickel Plated rass, Aluminium, Stainless Steel (rass, Metric) MTRIC orward emale Size (rass, ) orward emale Size iameter over Cores C. number of Cores Overhang lats Hex Ø PX789RXM2M2 M20 X M20 X 1.5 PX789RXT1T1 1/ / PX789RXM3M3 M25 X M25 X 1.5 PX789RXT2T2 3/ / PX789RXM4M4 M32 X M32 X 1.5 PX789RXT3T PX789RXM5M5 M40 X M40 X 1.5 PX789RXT4T4 1-1/ / PX789RXM6M6 M50 X M50 X 1.5 PX789RXT5T5 1-1/ / PX789RXM7M7 M63 X M63 X 1.5 PX789RXT6T or material options please add the following suffix to the ; rass (no suffix required), Nickel Plated rass 5, 316 Grade Stainless Steel 4, Copper ree Aluminium 1

8 NWCASTL (Headquarters) Tel: +44 (0) ax: +44 (0) Mail: CMP Products 36, Nelson Way, Nelson Park ast Cramlington, Northumberland N23 1WH, United Kingdom HOUSTON (Texas Inc) Tel: ax: Mail: CMP Products Texas Inc 5222 N. Sam Houston Pkwy. Houston, Texas, 77032, USA PRTH, WA Tel: ax: Mail: perthoffice@cmp-products.com CMP Products Pty Ltd Unit 3-22 Harlond Avenue, Malaga, WA 6090 Australia RISAN, QL Tel: ax: Mail: qldoffice@cmp-products.com CMP Products Pty Ltd Unit 2 / 1-5 Knobel Court, Shailer Park, QL 4128 Australia UAI Tel: ax: Mail: meoffice@cmp-products.com CMP Products Middle ast Office Office 6WA Room 134, PO OX ubai Airport ree Zone, ubai, United Arab mirates PUSAN Tel: ax: Mail: pusanoffice@cmp-products.com CMP Products (Korea) Ltd 19 Rm1915 Centum IS Tower, #1209, Jaesong1-dong, Haeundae-gu, usan, South Korea, SINGAPOR Tel: ax: Mail: seaoffice@cmp-products.com CMP Products (S..A) Pte Ltd. 21 Toh Guan Road ast, #09-03, Toh Guan Centre, Singapore SHANGHAI Tel: ax: Mail: shanghaioffice@cmp-products.com CMP Products ivision Room 304, uilding 7, No.1888 XinJinqiao Road Pudong, Shanghai , P.R. China CMP PROUCTS TPC Issue 2-07/14 JOHANNSURG Tel: ax: Mail: africaoffice@cmp-products.com CMP Products 49 New Road, lock A, Ground loor Midrand,1685, Johannesburg, S.A