RECTANGULAR CONNECTORS
|
|
|
- Marcus Banks
- 5 years ago
- Views:
Transcription
1 RECTANULAR CONNECTORS CN-360 SERIES EATURES Many applications Various connectors are available for connection by means of soldering, wire wrapping, crimping, PC board mounting, and insulation displacement connection (IDC). The user can choose a plug and jack combination that best meet each application. Small size for high-density mounting The connectors are small with a contact and terminal pitch of 2.54 mm (0.100 in.) between pins and between rows and are thus well suited for high-density mounting. Sturdy shell guide Sturdy shell guides are used to prevent mismating and to protect the pins. Excellent cost performance Streamlined design and automated manufacturing, including use of partial solder plating, provide excellent cost performance. SPECIICATIONS MATERIALS Item Specification Item Material Operating temperature range 55 C to +85 C Insulator Polyester (363J: PC94V-2) Current Rating DC 3 A (IDC type: 1 A) Conductor Copper alloy Voltage Rating AC 250 V Plating old plating, silver plating Contact resistance 15 mω max. (DC 6 V, 0.3 A) Insulation resistance 1000 MΩ min. (DC 500 V) Dielectric withstanding voltage AC 500 V for 1 minute Insertion force 2.5 kg max. (8 contacts), 20 kg max. (64 contacts) Withdrawal force 0.3 kg min. (8 contacts), 2.3 kg min. (64 contacts) Soldering φ0.60 mm (0.024 in.) max, AW #23 or less Wire-wrapping φ0.32 mm (0.013 in.) to φ0.26 mm (0.010 in.), AW #28 to #30 Applicable wire Crimping Standard contacts φ0.51 mm (0.020 in.) to φ0.32 mm (0.013 in.), AW #24 to #28, insulator φ1.2 mm (0.047 in.) max. Contacts for thick wires φ0.64 mm (0.025 in.) to φ0.32 mm (0.013 in.), AW #22 to #28, insulator φ1.7 (0.067 in.) max. IDC lat cable 1.27 mm (0.050 in.) pitch, AW #28 (stranded wire), AW #30 (solid wire) Applicable PC board 1.6 mm (0.063 in.) standard thick 1
2 CN-360 Series APPLICATION EXAMPLE CN-365P CN-365J CN-364P CN-364P CN-364J CN-364J CN-365P CN-365J CN-364P CN-364J CN-362J CN-363J CN-365P CN-367J CN-361P CN-365P CN-364P With type cover CN-365J CN-364P With type E cover CN-365P CN-364J With type J1 cover CN-365P CN-365J With type 1 cover With type Ccover With type /E cover With type E cover 2
3 CN-360 Series COVER (TYPE ) R R: 2.84 mm (0.112 in.) (8 and 16 contacts) R: 4.0 mm (0.157 in.) (24 to 64 contacts) 14 mm (0.551 in.) max 10.3 (0.405) UJITSU 28 (1.102) 37 (1.456) Two M2 mm (0.079 in.) thread 8 mm (0.315 in.) screws (shorter) our M2 mm (0.079 in.) thread nuts Two M2 mm (0.079 in.) thread 10 mm (0.394 in.) screws (longer) Two washers Two lock-screws Note: The screws, nuts, washers, and lock-screws PART NUMERS AND DIMENSIONS Number of contacts Part number CN-360C008- CN-360C016- CN-360C024- CN-360C032- CN-360C040- CN-360C048- CN-360C056- CN-360C (0.918) (1.318) (1.718) (2.118) (2.518) (2.918) (3.318) (3.718) (1.262) (1.662) (2.062) (2.462) (2.862) (3.262) (3.662) (4.062) Dimensions: mm (in.) 2.0 (0.078) 6.0 (0.236) 10.0 (0.393) 14.0 (0.551) 18.0 (0.708) φ 3
4 CN-360 Series COVER OR CALE TO CALE CONNECTION (TYPE C) R R: 2.84 mm (0.112 in.) (8 and 16 contacts) R: 4.0 mm (0.157 in.) (24 and 64 contacts) 14 mm (0.551 in.) max (0.405) Note: This cover can be combined with a cover of type, D, or E for cableto-cable connection. UJITSU 28 ( (0.039) Metal fittings Two screws for mounting metal fittings Two M2 mm (0.079 in.) thread 8 mm (0.315 in.) screws (shorter) our M2 mm (0.079 in.) thread nuts Two M2 mm (0.079 in.) thread 10 mm (0.394 in.) screws (longer) Two washers Two metal fittings Note: The screws, nuts, washers, and accessory PART NUMERS AND DIMENSIONS Number of contacts Part number CN-360C008-C CN-360C016-C CN-360C024-C CN-360C032-C CN-360C040-C CN-360C048-C CN-360C056-C CN-360C064-C (1.262) (1.662) (2.062) (2.462) (2.862) (3.262) (3.662) (4.062) Dimensions: mm (in.) 2.0 (0.078) 6.0 (0.236) 10.0 (0.393) 14.0 (0.551) 18.0 (0.708) φ 4
5 CN-360 Series COVER (WIDE OPENIN TYPE) (TYPE D) Cable clamp I 7.5 (0.295) 37 (1.456) 10.5 (0.413) 14 mm (0.551 in.) max (0.405) UJITSU 28 (1.102) our M2 mm (0.079 in.) thread 8 mm (0.315 in.) screws (shorter) our M2 mm (0.079 in.) thread nuts Two cable clamps Two lock-screws Note: The screws, nuts, cable clamp, and lockscrews PART NUMERS AND DIMENSIONS Number of contacts Part number CN-360C040-D CN-360C048-D CN-360C056-D CN-360C064-D (2.518) (2.918) (3.318) (3.718) Dimensions: mm (in.) (2.862) (3.262) (3.662) (4.062) I 12.0 (0.472) 16.0 (0.629) 20.0 (0.789) 5
6 CN-360 Series COVER (LON-SCREW TYPE) (TYPE E) R R: 2.84 mm (0.112 in.) (8 and 16 contacts) R: 4.0 mm (0.157 in.) (24 and 64 contacts) 14 mm (0.551 in.) max (0.405) UJITSU 28 (1.102) 53 (2.086) Two M2 mm (0.079 in.) thread 8 mm (0.315 in.) screws (shorter) our M2 mm (0.079 in.) thread nuts Two M2 mm (0.079 in.) thread 10 mm (0.394 in.) screws (longer) Two washers Two lock-screws Note: The screws, nuts, washers, and lock-screws PART NUMERS AND DIMENSIONS Number of contacts Part number CN-360C008-E CN-360C016-E CN-360C024-E CN-360C032-E CN-360C040-E CN-360C048-E CN-360C056-E CN-360C064-E (0.918) (1.318) (1.718) (2.118) (2.518) (2.918) (3.318) (3.718) (1.262) (1.662) (2.062) (2.462) (2.862) (3.262) (3.662) (4.062) Dimensions: mm (in.) 2.0 (0.078) 6.0 (0.236) 10.0 (0.393) 14.0 (0.551) 18.0 (0.708) φ 6
7 CN-360 Series COVER (STRAIT CALE-OUT COVER) (TYPE ) Section S 19.5 (0.767) 17.5 (10.688) Detail of section S (3.718) 30.5 (1.200) 6 (0.236) 8 (0.314) 10 (0.393) 14 mm (0.551 in.) max (0.405) UJITSU 28 (1.102) 37 (1.456) 55 (2.165) (4.062) Six M2 mm (0.079 in.) thread 8 mm (0.315 in.) screws Six M2 mm (0.079 in.) thread nuts Two cable clamps Two lock-screws Note: The screws, nuts, cable clamps, and lockscrews PART NUMER CN-360C064-7
8 CN-360 Series COVER (RIT ANLE CALE-OUT COVER) (TYPE 1) 19 (0.748) 6 (0.236) 20 (0.787) 20 (0.787) ø9 (0.354) 17 (0.669) 10 (0.393) (3.207) 17 (0.669) (0.576) Two cable clamps Slider Two M2.6 mm (0.102 in.) thread 8 mm (0.315 in.) screws LOCKED STATE METAL ITTINS 6 (0.236) Metal fittings CN-360A11 PC board 1 mm (0.039 in.) min. Note: After connectors are mated, moving the slider locks the connectors. Note: The CN-360 A11-metalfittings are used for this cover. PART NUMER CN-360C
9 CN-360 Series COVER (RIT ANLE CALEOUT COVER) (TYPE /E) Material: Zync die cast Plating: Nickel plating (2.518) 17 (0.669) M2.5 (0.098) 8 (0.314) (1.731) φ11 (0.433) Cable hole M2.5 (0.039) Through-hole (2.853) 12 (0.472) 19 (0.748) 10 (0.393) Two M2.5 mm (0.098 in.) thread 5 mm (0.197 in.) screws Two M2.5 mm (0.098 in.) thread 8 mm (0.315 in.) screws Cable clamp Two lock-screws Note: The screws, cable clamp, and lock-screws PART NUMER CN-360C040-/E 9
10 CN-360 Series COVER (OTUSE ANLE CALE-OUT COVER (40 CONTACTS ONLY)) (TYPE J1) M2.6 (0.102) 25 (0.984) Two screws φ12 (0.472) Cable hole (2.518) 20 (0.787) 24 (0.944) M2 (0.078) 14 (0.511) Three screws (2.824) 10.3 (0.405) 7 Three M2 mm (0.079 in.) thread 14 mm (0.551 in.) long screws Two M2.6 mm (0.102 in.) thread 25 mm (0.984 in.) long screws Two M2.6 mm (0.102 in.) thread 12 mm (0.472 in.) long screws Cable clamp Two M2.6 mm (0.102 in.) thread nuts Three M2 mm (0.079 in.) thread nuts PART NUMER CN-360C040-J1 10
11 CN-360 Series ujitsu Components International eadquarter Offices Japan ujitsu Component Limited otanda-chuo uilding 3-5, igashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) ax: (81-3) Web: North and South America ujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA U.S.A. Tel: (1-408) ax: (1-408) Web: Europe ujitsu Components Europe.V. Diamantlaan WV oofddorp Netherlands Tel: (31-23) ax: (31-23) Web: Asia Pacific ujitsu Components Asia Ltd. 102E Pasir Panjang Road #04-01 Citilink Warehouse Complex Singapore Tel: (65) ax: (65) ujitsu Components America, Inc. All company and product names are trademarks or registered trademarks of their respective owners. Rev. 09/
RECTANGULAR CONNECTORS
RETNGULR ONNETORS FN360 Series FN-365P FN-365J FN-364P FN-364P FN-364J FN-364J FN-365P FN-365J FN-364P FN-364J FN-362J FN-363J FN-365P FN-367J FN-365P FN-364P FN-361P With type cover FN-365J FN-364P With
RECTANGULAR CONNECTORS
RETNGULR ONNETORS FN360 Series FN-365P FN-365J FN-364P FN-364P FN-364J FN-364J FN-365P FN-365J FN-364P FN-364J FN-362J FN-363J FN-365P FN-367J FN-365P FN-364P FN-361P With type cover FN-365J FN-364P With
38999 Space grade ESA/SCC Section. MIL-DTL Space Grade Circular Connectors
38999 Space grade ESA/SCC 3401 Section II MI-DT 38999 Space Grade Circular Connectors 59 38999 Space Grade ESA/SCC 3401 Contents 38999 Space Grade ESA/SCC 3401 SCC Specification.......................................................61
Amphenol RF. Type N. Type N Connectors. Type N. Description. Features/Benefits. Applications
Amphenol RF 144 Connectors Description Named after Paul Neill of Bell Labs after being developed in the 1940 s, the offered the first true microwave performance. The connector was developed to satisfy
COMPONENT SPECIFICATION M80-7XX SERIES CONNECTORS - THREE ROW
COMPONENT SPECIFICATION M80-7XX SERIES CONNECTORS - THREE ROW JUN 200 CONTENTS: SECTION TITLE PAGE Description of Connector and Intended Application 2 2 Marking of Connector and/or Package 2 3 Ratings
PRODUCT SPECIFICATION
MINI-FIT SR. SERIES 1.0 SCOPE This specification covers the 10.00 mm / (.394 in.) centerline tin and gold plated connector series, single and dual row versions in wire to wire and wire to printed circuit
UHF/Mini-UHF Coaxial Connectors
UHF/MiniUHF Coaxial Connectors The Amphenol UHF/MINIUHF connectors are popular and economical, used when impedance mating is not required. General purpose units are designed to operate satisfactorily op
*NOTE: 75 OHM SERIES CONNECTORS ARE NOT INTERMATEABLE WITH THE 50 OHM SERIES.
The Connex N connectors with screw coupling are fully interchangeable with N connectors made to the MIL-C-39012 specification. Designed for use in all systems where very good R.F. and mechanical performance
EPIC Rectangular Connector Inserts. HBE Series. Technical Data Number of Contacts:
HBE Series HBE series inserts provide reliable termination and performance in the vast majority of medium power and control applications. Methods of termination include screw, crimp, and spring cage clamp.
Outer contact 1.0 milliohm max.
MCX.4 11/27/01 5:17 PM Page 17 Connex MCX Series connectors are ideal for applications and designs where weight and space savings are critical. This series has a 50 ohm impedance structure which operates
ibridge and ibridge Ultra
2.00 mm Board to Cable Connectors ED. 06 10.2016 Catalog EA IB001 erni.com erni.cn TABLE OF CONTENTS OVERVIEW General 03 Technical Details 04 Features 05 Electrical and Mechanical Characteristics 10 Ordering
SMB/SMC Coaxial Connectors
The Amphenol SMB/SMC subminiature coaxial connectors with 50 ohm impedance are for applications to 4 GHz (SMB) or 10 GHz (SMC). Generally less expensive then SMA, these connectors are used primarily in
D-Sub Vertical Surface Mount Connectors RoHS compliant Economical Interface Solution for SMT Applications
D-Sub Vertical Surface Mount Connectors RoHS compliant Economical Interface Solution for SMT Applications General In the manufacture of assemblies, the trend toward using SMT components is unbroken. Whereas
CPTCONNECTOR. Board-to-wire. Features. Specifications
CPTCONNECTOR Board-to-wire HIT AIT AIT- HCM SHC HCH MIO CPT BMD RAD CIT GIT0P GITP HIC SNA NAC- SQS SQM SQH SQS Developed in pursuit of miniaturization and low profile as PC board connector for automobile.
3M Telecommunications Solutions for Networks. Quante QSA (= LSA plus) System Catalogue. Innovation
3M Telecommunications Solutions for Networks Quante QSA (= LSA plus) System Catalogue Innovation IDC Modules Overview 3M Quante Cross Connect System QSA QSA Series 1 Connection modules for screw fixing
Conductor Bushings Series 8174
> Current lead-in for Ex d enclosures > 1 to 72 conductors combined in one current lead-in > Series screw-in plug-in > For voltages up to max. 1 V > For size conductor up to 7 mm 2 www.stahl.de 3163E The
AIT- CONNECTOR. Board-to-wire/Wire-to-wire terminal. Features. Specifications
AIT- CONNECTOR.4 terminal Board-to-wire/Wire-to-wire Features Ultra Low Profile Connector Over 3% Height uction as compared to the Standard USCAR Footprints. Variations There are multiple varieties of
Primary Terminals & Connectors
Primary & Pure electrolytic copper with electro-tin plating for corrosion resistance Deep internal serrations promote firm wire grip for maximum strength Insulation (where applicable) is color coded to
Quick Reference Guide Power Series Switches
Quick Reference Guide The Power Series employs a Quick-make/Quick-break wiping action contact mechanism. This highspeed movement reduces the teasing of the contact surfaces reducing pitting due to arcing.
EPIC Rectangular Connectors HBE Series
HBE Series The HBE series inserts are suitable for applications with high voltages and current. The inserts can be terminated in a variety of ways: screw, crimp, or spring cage clamp. TECHNICAL DATA Number
AIT- CONNECTOR. Board-to-wire/Wire-to-wire. Features. Specifications
AIT- CONNECTOR Board-to-wire/Wire-to-wire Features Ultra Low Profile Connector Over % Height uction as compared to the Standard USCAR Footprints. Variations There are multiple varieties of AIT- Connectors
Plok. Rapid Mating Multi-Pin Industrial Connector. Amphenol Industrial Sine Systems * Pyle Connectors Corporation
- Plok Rapid Mating Multi-Pin Industrial onnector mphenol Industrial Sine Systems * Pyle onnectors orporation eatures and enefits Rapid mate spring loaded, push to mate, pull to unmate coupling system
TURQUOISE SWITCHES ABJ (BJ) SWITCHES
Ultra-miniature Size Sealed Switches TURQUOISE SWITCHES ABJ (BJ) SWITCHES Terminal type Mounting hole 2.3 mm type FEATURES Ultra-miniature size, High sealing performance sealed switches Elastomer double
MMCX Coaxial Connectors
The Amphenol MMCX series is the next generation of microminiature connectors. Offering a reliable broadband performance from DC to 6 GHz. These 50 ohm connectors incorporate the industryapproved MMCX interface,
ST Connectors & Adapters
Features & Benefits High performance singlemode and multimode pre-polished ferrules ST* compatible bayonet coupling Field installable Standard crimp and crimpless screw type KEVLAR retention Variety of
Pegasus Series Amphenol Pcd
Pegasus Series Amphenol Pcd Amphenol Pcd is one of the world s leading suppliers of interconnect products for Military, Commercial Aerospace and Industrial applications. Located north of Boston in Beverly,
Eurostyle Terminal Blocks Focus Product Stock List
Eurostyle Terminal Blocks Focus Product Stock List Introduction Table of Contents In an ongoing effort to better serve the Industrial Machinery, Commercial, and HVAC markets, Tyco Electronics is pleased
Screw Terminal Block Cables
9 Screw Terminal Block s Pre-terminated s Simplify of Terminal Blocks to PLC Modules 1 Reduce setup time with cables pre-terminated for the exact PLC module in use 1 No need to make custom connectors 1
SMB Series. SMB Series. Specifications. Interface Dimensions. Available in 50 Ohm and 75 Ohm versions. Snap-on interface reduces installation time.
Available in 50 Ohm and 75 Ohm versions. Snap-on interface reduces installation time. Self-cleaning outer spring withstands moderate vibration. Small & lightweight. Frequency Range: Up to 4 GHz Specifications
Junction Boxes Series 8118
> Enclosure in glass fibre reinforced polyester resin > 3 different sizes available with 4, 5 or as a junction box with integrated miniature fuse: 3 terminals and 1 miniature fuse 7 terminals and 1 miniature
SMARTen STP Patch Cords Features
Features Patch Cords are used in the work area and cross-connect generic cabling applications Comprise a length of eight-wire flexible patch cable, terminated with two eight-position RJ-45 plugs at each
PRODUCT SPECIFICATION. SFP+ Cage and Cage Assembly 1 of 8 A
SFP+ Cage and Cage Assembly 1 of 8 A 1.0 Objective This specification defines the performance, test, quality and reliability requirements of the _Small Form-factor Pluggage (SFP+) product. 2.0 Scope This
1mm Pitch SMT Board-to-Board Connectors(Standard Interface Connector Compliant with VESA FPDI-1)
1mm Pitch SMT Board-to-Board Connectors(Standard Interface Connector Compliant with VESA FPDI-1) DF Series Features 1. Compliant with the VESA FPDI-1 Standard Interface Connector The and contact connectors
PURA. Pure Gas Dewpoint Transmitter. Users Guide
PURA Pure Gas Dewpoint Transmitter Users Guide Issue January 2003 Page 2 Table of Contents SECTION PAGE 1 Product Overview 3 2 Preparation 3 3 Installation 3 3.1 PURA Premium & OEM Dewpoint Transmitter
ACCESSORIES. Standard packing
ACCESSORIES HC RELAYS (Sockets and Terminal ) FEATURES. HC Relay Sockets In the table below, the suitable for each type of HC relay is indicated by a black dot. ) Plug-in type, type, and wrapping type
Compact Pressure Switch
Compact Pressure Switch Series ZSE1 (For Vacuum)/SE1 (For Positive Pressure) For General Pneumatics Can be integrated with ZM ejector system. RoS Variable hysteresis 1 to 10% of set pressure (Variable)
Introduction. Description. Series P48 Pressure Controls for Steam, Air or (hot) Water. Feature and Benefits
PSC9626 European Refrigeration Controls Catalogue Catalog Section 6 Product Bulletin Series Pressure Controls for Steam, Air or (hot) Water Introduction The series pressure controls are designed as operating
Glenair Well-Master TM 260 Micro-D Withstands Extreme High Temperature
Section : Well-Master Micro- + P eader lenair Well-Master TM Micro- Withstands Extreme igh Temperature Standard Micro- connectors are rated for +125. lenair's MWM Micro- can withstand +150 continuous operating
Datamate Specification. Pin Numbering. Mating Profiles. Materials. Mechanical. 3 Row 6.
Datamate Specification Materials Mechanical Mouldings: Glass-filled thermoplastic UL94V-0 Female contacts: rass shell, with eryllium opper inner contact Male contacts: Phosphor bronze Finish: See individual
![[Instruments for vacuum measurement, checking and adjustment] 3](/thumbs/94/121874202.jpg "[Instruments for vacuum measurement, checking and adjustment] 3")
MUELLER. A Wall Type. Indicator Post. Reliable Connections. General Information 2. Technical Data/ Dimensions 3. Installation 4-5.
Installation Instructions manual MUELLER table of contents PAGE A-20814 Wall Type General Information 2 Technical Data/ Dimensions Installation 4-5 Maintenance 6 Parts 7 Indicator Post! WARNING: 1. Read
Prewired position switches FA series
2 Prewired position switches FA series Selection diagram 01 08 10 11 1 15 1 02 external rubber gasket external rubber gasket 1 51 52 54 55 56 5 ACTUATORS adjustable lever safety adjustable lever 41 45
Operating Instructions
Operating Instructions Light-metal Ex d enclosures / flameproof enclosure > 8265/0 Empty enclosure > 8265/4 Control panel, integrated in Ex e enclosure > 8265/5 Control panel Table of Contents 1 Table
Limit switches OsiSense XC Special For material handling applications, type XC1 AC
Presentation For material handling applications, type XC C b XC C with slow break contacts v With head for linear movement () 00_ 00_ 000_ Page / 00_ 00_ XCC XCC Page / XCC XCC / General characteristics
Small Form-factor Pluggable Connector
Small Form-factor Pluggable Connector OUTLINE SPT series is a connector and cage which is compatible to Small Form-factor Pluggable(SFP/ SFP+) specification of Multi-Source greement(ms) for optical transceivers.
Compact Pressure Switch
Compact Pressure Switch Series 2 (For Vacuum)/ 2 (For Positive Pressure) For General Pneumatics Can be integrated with ZX or ZR ejector system. A Easy and simple wiring Connector type 77 Compact Pressure
025 SERIES 40 POSITION CAP ASSY H-TYPE(Male Connector)
05FEB07 Rev.G4 1. Part Name and Part Number 1.1 Housing AMP Part Number 025 SERIES I/O CONNECTORS (H-Type,V-Type 2Row) Part Name 1376350 025 SERIES 8 POSITION CAP ASSY H-TYPE(Male Connector) 1376352 025
Pressure regulators Manually operated Fine setting valves. Brochure
Pressure regulators Manually operated s Brochure Pressure regulators Manually operated s Qn = 9 l/min Actuating element: Push button Internal thread Poppet valve Qn = 9 l/min Actuating element: Push button
EX-RECESSED CEILING LIGHT FITTINGS
EX-RECESSED CEILING LIGHT FITTINGS RLF/RLF-INOX 250 18-58 W / RLF/RLF-INOX 250... N 18-36 W Metallic design for Zone 1 and Zone 21 The RLF... explosion-protected recessed ceiling light fittings with electronic
Accessories. Finger Guards 134. Filter Guards grille 139. Accessories 140. Technology. DC Axial Fans. DC Radial Fans. Specials.
13 Technology Finger Guards 134 Filter Guards grille 139 140 Specials DC Axial Fans DC Radial Fans Everything that you need for your fan. ebm-papst provides an extensive range of accessories for optimum
GENERAL APPLICATION NOTES
GENERAL APPLICATION NOTES There are common considerations when using our connectors. Additional considerations may apply based on the particular connector being used, the application, and conditions in
E10 E10 E10 E10 E10 E10 E10 E10 E10 E10 E10 E10 E10 E10. Cable gland Series 8161/7, 8161/8. Installation Equipment and Accessories E10/1.
> Explosion protection type "Increased safety" > Degree of protection IP68 > Ex e and Ex i versions > Integrated blind plug (accessory) for closing unused cable glands > Cable diameter ranges from 1 to
Compact pressure switches for gas and air
Compact pressure es for gas and air / 5.0 Printed in Germany Edition 0.8 Nr. 9 544 6 Technical description The pressure is an adjustable compact pressure according to EN 854 for combustion plants. The
Pressure switch and Thermostat CAS
Data sheet Pressure switch and Thermostat CAS The CAS Series consists of a series of pressure controlled switches and temperature controlled switches. In this series, special attention has been given to
INSTRUCTION MANUAL. January 23, 2003, Revision 0
INSTRUCTION MANUAL Model 810A In-Vitro Test Apparatus for 310B Muscle Lever January 23, 2003, Revision 0 Copyright 2003 Aurora Scientific Inc. Aurora Scientific Inc. 360 Industrial Parkway S., Unit 4 Aurora,
Tapped Hole (.375) Tapped hole 15 (.594) (.391±.004) Frame 19±0.2 (.750±.008) 12.7±0.2 (.500±.008) 19±0.2 (.750±.008) R S 4 x Ø 5.4 (.
434 Lift-off In-line Zinc can also be 31.5 19.1 (.750) For Lift-Off For on Lift-Off 1300 (300 lbf) 2200 (500 lbf) 56 T.P.I. (2.21) 31.5 19.1 (.750) Tapped hole Ø 9.5 (.375) ultimate 3300 (750 lbf) 9300
DK ton, Double-acting, Die-type Crimping Tool
INSTRUCTION MANUAL DK6040 60-ton, Double-acting, Die-type Crimping Tool Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register
JSP. MKT Series J S P -
Loose Taped Fig.1 Fig. 2 JSP Typical applications: blocking, coupling, decoupling, by-passing, interference suppression in low voltage applications (i.e.:automotive) Ød ±0.05 All dimensions are in mm.
INSTRUCTION MANUAL Pressure Relief Device LPT
INSTRUCTION MANUAL Pressure Relief Device LPT 5COV475800 LPT REV00 CONTENT: 1 SAFETY 1.1 Safety instructions 2 1.2 Specified applications 2 1.3 Safety notes on the equipment operation 2 2 PRESSURE RELIEF
I.H.S INSTALLATION INSTRUCTIONS
I.H.S INSTALLATION INSTRUCTIONS TOOLS REQUIRED The following tools will be required for installation of your I.H.S. system. Item Qty Needed 9/16 Open End Wrench 2 3/4 Open End Wrench 1 1/2 Open End Wrench
Mini-Mac Applicator Specification Sheet Part No (Replaces )
Mini-Mac Applicator Specification Sheet Part No. 63801-2900 (Replaces 19814-1000) FEATURES ΠQuick set-up time; plus the crimp height, track and feed adjustments can be preset in applicator ΠConductor
Operating Instructions
Operating Instructions Ex d Enclosures in Light Metal / Flameproof Encapsulation > 8265/0 Empty Enclosure > 8265/4 controller, installed in Ex e enclosure > 8265/5 controller Contents 1 Contents 1 Contents...2
INSTRUCTIONS 360 Y-DROP HAGIE STS 2015
INSTRUCTIONS 60 Y-DROP HAGIE STS 05 INSTRUCTIONS 60 Y-DROP HAGIE STS 05 INTRODUCTION Before beginning, it s important to know where each mounting bracket fits relative to the row spacing involved. The
Emergency Stop Devices/Rope Pull Switches
Rope pull switch with pulltoreset button for emergency stop device Metal housing Emergency stop device with detent mechanism according to EN ISO 13850 and EN 602041 Clamping head for pull rope Indication
Series P48. Pressure Controls for Steam, Air or (hot) Water. Product Bulletin. Generous wiring space provided. Splash-proof enclosure (IP54)
Series P48 Pressure Controls for Steam, Air or (hot) Water Product Bulletin The series P48 pressure controls are designed as operating or high/low cut-out control on steam, air or (hot) water applications.
Installation, use and maintenance instructions. Gas burner (5)
Installation, use and maintenance instructions Gas burner MODEL GAS 4 TYPE 516 T80 291 (5) TECHNICAL FEATURES Thermal output 180-470 kw 154.800-404.200 kcal/h Fuel Natural gas Pci 8-10 kwh/m 3 = 7000-8600
M8, M12, M18, M30 Cube 40 x 40 mm. 2 mm 15 mm 2 mm 15 mm 20 mm 40 mm
Bulletin 872C, 871TM, 871FM, 871C, 871P Product Line Overview Proximity Sensors (872C, 871TM, 871FM) 6 / 2011 Features Bulletin 872C 871TM 871P Size Sensing Range Standard Sensing Range Extended Sensing
CONTENTS PAGE. Introduction... HUM 2 Availability... HUM 2 Applications... HUM 2
CONTENTS PAGE SECTION PAGE erjjboseries Introduction... HUM 2 Availability... HUM 2 Applications... HUM 2 Testing... HUM 2 Part Number System... HUM 2 General Information... HUM 2 Ampacity Chart for Standard
RG2 Gripper Datasheet Version 1.6
RG2 Gripper Datasheet Version 1.6 The RG2 gripper is a flexible electric gripper specially designed for robots from Universal Robots. The long stroke allows the gripper to handle a variety of object sizes.
Pegasus Series Amphenol Pcd
is one of the world s leading suppliers of interconnect products for Military, Commercial Aerospace and Industrial applications. Located north of Boston in Beverly, Massachusetts, the company designs and
Weatherproof Products
Red ot Iberville arlon Weatherproof Products S oxes and overs pplications : S boxes are S approved for wet locations S device boxes are installed in applications that require a rugged unit to accept wiring
Agilent Wedge for Probing High-Pitch ICs A Hands-Free Solution for Probing Fine-Pitch ICs
Agilent Wedge for Probing High-Pitch ICs A Hands-Free Solution for Probing Fine-Pitch ICs Application Note Making reliable, nondestructive connections to 0.5 and 0.65 mm components Table of Contents 2
10 switches simultaneously. The settings of the master sensor (source of copy) can be copied to the slave sensors. Reducing setting labor
2-Color Display High-Precision Digital Pressure Switch Series ZSEA(F)/EA ZSE E RoHS New IP65 ZSE E ZSE0 E0 M8 connector type E70 ZSE E E Applicable Air, Non-corrosive gas, Non-flammable gas fluid Can copy
Expert Hydrostatic Level Transmitters
Expert Hydrostatic s General Features MJK Expert hydrostatic level transmitters are designed for level measurement by submerging the transmitter in open channels, drains and tanks. Expert hydrostatic level
POWR-BLOKS Distribution/Splicer Blocks and Covers
SPECIFICATIONS Voltage : 600V erage: Based on NEC Table 310-16, using 75 C copper wire Material: Phenolic rated at 150 C and Thermoplastic rated at 125 C (LD1400 and LS1300 series only) : Standard: Highly
Luminus Series Amphenol Pcd
Luminus Series Amphenol Pcd Amphenol Pcd is one of the world s leading suppliers of interconnect products for Military, Commercial Aerospace and Industrial applications. Located north of Boston in Beverly,
1mm Pitch SMT Board to Board Connector(Standard Interface Connector Compliant with VESA FPDI-1)
1mm Pitch SMT Board to Board Connector(Standard Interface Connector Compliant with VESA FPDI-1) DF Series Features 1. Compliant with the VESA FPDI-1 Standard Interface Connector The and contact connectors
1.0mm PITCH I/O CABLE IDT TOOL
INSTRUCTION MANUAL NO. IS-8023E ISSUED 1995-09-25 REVISED 2005-07-20 REV. G 1.0mm PITCH I/O CABLE IDT TOOL (Tool Number: 578xx-5000) OPERATING MANUAL Molex Japan Co., Ltd. Molex Japan Co., Ltd. Contents
Data sheet Pressure switch type CS December 2001 DKACT.PD.P10.A B1119
Pressure switch type CS December 2001 DKACT.PD.P10.A2.02 520B1119 Introduction Pressure switch type CS is part of the Danfoss pressure control range. All CS pressure switches have a built-in pressure-operated,
Pressure switch and Thermostat Type KPS
MAKING MODERN LIVING POSSIBLE Data sheet Pressure switch and Thermostat Type KPS The KPS Series consists of a series of pressure and temperature controlled switches. In this series, special attention has
COOPER POWER SERIES. 50 A 2:1 series multiple (dual voltage) switch cap/wrench, lever or hotstick operable handles installation instructions
Voltage Regulators MN800013EN Effective February 2016 Supersedes S800-70-1 August 2012 COOPER POWER SERIES 50 A 2:1 series multiple (dual voltage) switch cap/wrench, lever or hotstick operable handles
Foundation Products. Poured In Ground Anchor Bolts E1 - E4. Structural Foundations E5 - E12. Copyright 2016 s Industry Inc. SIE-RA-CMP EN
Foundation Products Poured In Ground Anchor Bolts E1 - E4 Structural Foundations E5 - E12 EA EB Poured in Ground Anchor Bolts Layout SIEMENS Anchor Bolts 131702-4X shown for reference purposes only! Actual
Pressure switches and thermostats, type KPS
Description KPS units are pressure-controlled switches. The position of the contacts depends on the pressure in the inlet connection and the set scale value. In this series, special attention has been
TECHNICAL CHARACTERSTICS
and solenoid valves spool version GM - GL series Type of valves with dorsal consumption: GM-...series with integrated connections GL-...series without connections TECHNICAL CHARACTERSTICS Ambient temperature:
F series Foot Switches
F series Foot Switches ITC presents a complete line of foot switches from Bernstein, designed to respond to the most stringent requirements for machine control and safety applications. The F series includes
GACELA roller runners
INDEX roller runners 1... pp. 4 RUNNERS... ADJUSTABLE... FOR DOWEL-FIX DRAWER ASSEMBLY... QUICK ASSEMBLY... WITH ADJUSTABLE FRONT... FOR DROP-DOWN FRONT... 4 5 6 7 8 2 GACELA-3... 38 GACELA-3 RUNNERS...
Installation Guide, MPower Echelon Console
Installation Guide, MPower Echelon Console AC Performance, AC Sport and AC Performance Plus Schwinn Echelon Console (External Routing) 1. Install batteries to console. Mount the console to the bike. 2.
Copper Bonded Ground Rod / Grounding Rods / Copper Bonded Earth Rod / Earthing rods
Copper Bonded Ground Rod / Grounding Rods / Copper Bonded Earth Rod / Earthing rods Copper bonded earth rods are made from low carbon Steel. Earth Rods are molecularly bonded with 99.9% pure electrolytic
Miniature controls. Contactors. Overload relays. Starters. Control relays
Contactors Overload relays Starters Control relays Description General features Wiring terminations available include plugon connectors, wire pins for PC board mounting and solder connections Low power
TECHNICAL INFORMATION
TECHNICAL INFORMATION Model No. Description RP2300FC, RP2301FC Router CONCEPT AND MAIN APPLICATIONS Models RP2300FC and RP2301FC are upgraded sister tools of our current plunge-type electronic router Model
Opening Angle 76º 30º [337] 45º 76º 30º [213] 45º 76º 30º [169] 45º 76º 30º [337] 45º 76º 30º [337] 45º 76º 30º [128] 45º 76º 30º [404] 45º 76º 30º
![Opening Angle 76º 30º [337] 45º 76º 30º [213] 45º 76º 30º [169] 45º 76º 30º [337] 45º 76º 30º [337] 45º 76º 30º [128] 45º 76º 30º [404] 45º 76º 30º](/thumbs/81/84065106.jpg "Opening Angle 76º 30º [337] 45º 76º 30º [213] 45º 76º 30º [169] 45º 76º 30º [337] 45º 76º 30º [337] 45º 76º 30º [128] 45º 76º 30º [404] 45º 76º 30º")
17.22 Picture Force N [lbs] Opening Angle Weight Opening/closure time min 84A3-310000000 84A3X310000000 84A3Y310000000 84A3Z310000000 60º 1,35 84A3-0000000 84A3X0000000 950 84A3Y0000000 [213] 84A3Z0000000
Telescopic winch handle Speedfriend"
Winch handles, jib furlers JIB FURLERS - WINCH HANDLES - SPREADER COVERS 57 Floating winch handles Floating universal size winch handles Fitted with "Lock In" winch system; universal size for any winch;
Hand lever valves VHER
Hand lever valves VHER Hand lever valves VHER Key features Powerful Flexible Practical -M- Flow 170 3800 l/min 4/3-way valve mid-position closed mid-position exhausted mid-position pressurised Connections:
Installation Manual , Rev BC January Micro Motion R-Series Coriolis Flow Sensors
Installation Manual 20002514, Rev BC January 2018 Micro Motion R-Series Coriolis Flow Sensors Safety and approval information This Micro Motion product complies with all applicable European directives
4/2 way Pneumatic Solenoid Valve
4/2 way Pneumatic Solenoid Valve Compact design Push-over solenoid coil Exhaust air can be regulated Tube, threaded and sub-base connections Type combined with Seat valve version Type 2508 Type 2510/11
TANDEM MODULATOR FOR OUTLET GAS FLOW: STEPPED (836 TANDEM) - CONTINUOUS (837 TANDEM) SERVO-CONTROLLED PRESSURE REGULATOR
SIT Group 836-837 TANDEM MULTIFUNCTIONAL GAS CONTROL MODULATOR FOR OUTLET GAS FLOW: STEPPED (836 TANDEM) - CONTINUOUS (837 TANDEM) SERVO-CONTROLLED PRESSURE REGULATOR ALL ADJUSTMENTS ACCESSIBLE FROM ABOVE
MDM Accessories
Accessories General Hardwares are the screwlock assemblies or the brackets used for the mounting of connectors on panels or PC, or for the fixing of plugs and receptacles. They are not fixed on the connectors
Position switches FP series
A Position switches FP series Selection diagram 0 08 8 9 0 0 0 Ø 8 mm Ø, mm external rubber stainless steel stainless steel fiber glass rod gasket sphere sphere adjustable lever safety adjustable lever
The Limit Switch with Better Seal, Shock Resistance, and Strength. General-purpose Limit Switch. Model Number Structure
General-purpose Limit Switch CSM_DA-_N_DS_E The Limit Switch with Better Seal, Shock Resistance, and Strength A double seal on the head, a complete gasket cover, and other features ensure a better seal
THREADED CONNECTORS TEMPERATURE: 300 F [150 C] Body Material/ Contact Material/ O-ring. Connector Contact Terminations
![THREADED CONNECTORS TEMPERATURE: 300 F [150 C] Body Material/ Contact Material/ O-ring. Connector Contact Terminations](/thumbs/80/82442241.jpg "THREADED CONNECTORS TEMPERATURE: 300 F [150 C] Body Material/ Contact Material/ O-ring. Connector Contact Terminations")
THREADED CONNECTORS Suggested Mounting Detail For ed s TEMPERATURE: 300 F [150 C] Customer Bore 25000 0.312 0.308 #1/4-28 2500 5 #16 PIN X #22 CUP Body / Arlon 2000/ BeCu Gold Contact Mating 4805-063-002