DESCRIPTION / REMARKS E40972 ROTATION (2).250 FLAG TYPE Q.C. TERMS. WITH INSUL. GRIP ON BROWN LEADS. LEADS SKINNED.750±.062
|
|
- Flora Shepherd
- 5 years ago
- Views:
Transcription
1 Dimensional Drawing MODEL REF CUSTOMER HP VOLTS AMPS HZ RPM ROTATION CUSTOMER PN DESCRIPTION / REMARKS K55HXRHM2147 E40972 DAYTON 1/ C.CW. LEAD END REV BALL BEARING E40972 #16 GREEN GROUND LEAD TO BE ±1.000 BETWEEN CENTERS OF TERMS. TERM. TO FIT #10 SCREW 4 LEADS,#18,.031 THICK INSUL. TO EXTEND BEYOND MOTOR BLACK= ; WHITE= BROWN= ; BRN/WHT STRIPE= AUTOMATIC THERMAL PROTECTOR (2).250 FLAG TYPE Q.C. TERMS. WITH INSUL. GRIP ON BROWN LEADS. LEADS SKINNED.750± NC2A, 4 STUDS ON BOTH ENDS NAMEPLATE DOUBLE SHAFT FLAT 90 APART TOP (2) BLACK DRAIN PLUGS SEE CRIT. REQ. # DIA. B.C GROMMET (4) LEADS,# THICK INSUL. (2) & (2) FOR REVERSING ROTATION TOP TOP DRAIN PLUG INSTRUCTION LABEL WARNING LABEL REVERSING WARNING LABEL TO BE ADJACENT TO LEAD HOLE WATER SLINGER "BUNA N" RUBBER THIS SIDE SPRING WASHER THIS END PROT. AUX. MAIN WHITE BRN/WHT STRIPE MALE TOTALLY ENCLOSED ROTATION: C.CW.LEAD END REV ROTATION IS C.CW VIEWING LEAD END WITH ORG. TO ORG. & YEL. TO YEL. TO REVERSE ROTATION INTERCHANGE ORG. & YEL. LEADS DIMENSIONS UNITS,INCHES FEMALE BLACK BROWN L1 TO BLK TO L2 TO WHT CAPACITOR PAGE OF
2 RPM WATTS AMPS OzFt Curve Descriptions: Motor(1) Test 3 Run 208V 60 Hz 6P HI CCW 3ufd Run Filtered Data SPEED vs TORQUE SPEED vs ILine SPEED vs WATTS Motor Ratings: (1) K055HXHXRHM2147 ID: 1 of 2 Request No: Copyright Dayton Manufacturing Company 2015 Report No: /03/2015 Page 3 PAGE OF
3 Filtered Motor Description Test Conditions Model: K055HXHXRHM2147 Test Type: Run Run Cap: 3 Motor ID: 1 of 2 Test Number: 3 Start Cap: 0µfd Poles: 6 Poles: 6 Environment: Volts: Volts: 208 Tested: 6/25/2015 2:51:55 PM Frequency: 60 Hz: 60 Tested By: Liu, Bingmin HP: 1/6 Rotation: CCW Gear Ratio: 1:1 Speed: 1075 Special Cond: Bearing Friction: 0.05 OzFt Phase: 1 Speed Conn: HI Windage Torque: 0.20 OzFt Protector: 7AM036A5 TestBoard: NMQC Plotter Fixture #1 Special Points Vline(V) Vaux(V) Vcap(V) Iline(A) Imain(A) Iaux(A) Watts RPM Tq(Ozft) HP Eff(%) PF(%) RPM BDT OZFT PAGE OF
4 RPM WATTS AMPS OzFt Curve Descriptions: Motor(1) Test 3 Run 230V 60 Hz 6P HI CCW 3ufd Run Filtered Data SPEED vs TORQUE SPEED vs ILine SPEED vs WATTS Motor Ratings: (1) K055HXHXRHM2147 ID: 1 of 3 Request No: Copyright Dayton Manufacturing Company 2015 Report No: /03/2015 Page 3 PAGE OF
5 Motor Description Test Conditions Model: K055HXHXRHM2147 Test Type: Run Run Cap: 3 Motor ID: 1 of 3 Test Number: 3 Start Cap: 0µfd Poles: 6 Poles: 6 Environment: Volts: Volts: 230 Tested: 5/16/2015 6:46:10 AM Frequency: 60 Hz: 60 Tested By: Liu, Bingmin HP: 1/6 Rotation: CCW Gear Ratio: 1:1 Speed: 1075 Special Cond: Bearing Friction: 0.07 OzFt Phase: 1 Speed Conn: HI Windage Torque: 0.32 OzFt Protector: 7AM036A5 TestBoard: NMQC Plotter Fixture #1 Special Points Vline(V) Vaux(V) Vcap(V) Iline(A) Imain(A) Iaux(A) Watts RPM Tq(Ozft) HP Eff(%) PF(%) Cap RPM BDT OZFT PAGE OF
6 Wiring Diagram.750 PLUG CTION LABEL EL WATER SLINGER "BUNA N" RUBBER THIS SIDE SPRING WASHER THIS END AUX. MAIN BRN/WHT STRIPE NING LABEL TO LEAD HOLE PROT. WHITE MALE ITH SE ADS BLACK BROWN L1 TO BLK TO L2 TO WHT CAPACITOR FEMALE REFER TO S.E.I.M. 241 PAGE 1 OF 1
(A) ±.060 ±.060 (A) NAMEPLATE NAMEPLATE n.004 A TOP TOP CONNECTIONS SLINGER PROTECTOR CONNECTIONS LINE
Dimensional Drawing VAR MODEL CUST. T. NO. A B C D H VOLTS SF AMS HZ RM CONN VOLTS ROT. DESCRITION / REMARKS 00 C55JXKAL58.6 / 5/0.85 6./. 60 450 AUTO 56J,BALL BEARING 00 C55JXKAL58.6 / 5/0.85 6./. 60
More informationBudget Range Operators Handbook
Budget Range Operators Handbook BAMBI AIR COMPRESSORS LTD 152 Thimble Mill Lane Heartlands Birmingham B7 5HT United Kingdom Tel: 0121 322 2299 Fax: 0121 322 2297 Email: sales@bambi-air.co.uk www.bambi-air.co.uk
More informationPVQ 13 A2 R SE 1 S 20 C-11 D
PVQ - Variable Displacement Piston Pump PVQ 13 A2 R SE 1 S 2 C-11 D 1 2 3 4 6 7 8 9 1 1 Model Series PVQ Inline Piston Pump Variable Volume Quiet Series 4 Rotation Viewed from shaft end R Right hand, standard
More informationHazardous Duty Explosion Proof, Three Phase, Blue Chip Severe Duty
Applications: Hazardous Duty Explosion Proof, Three Phase Class I Groups C & D, Class II Groups F & G, Rigid Base installed in hazardous environments as defined by the motor's explosion proof class and
More informationEngineering Data RPM: 3000 HP: Serv. Factor: 1,0 KW:,37 Form Factor: 1,00 Amps: 20 KW2: Form Factor 2: FLA2: Volts: 24. Frame: 71D
Product Features Catalog No: L085/O043/098066.00 Model: CI42D34FT7C Engineering Data RPM: 3000 HP: Serv. Factor: 1,0 KW:,37 Form Factor: 1,00 Amps: 20 KW2: Form Factor 2: FLA2: Volts: 24 Frame: 71D Max
More informationMD R a n g e O p e r a t o r s H a n d b o o k
MD R a n g e O p e r a t o r s H a n d b o o k Covering Models:- MD35/20 MD75/80 MD75/0 MD75/0V MD75/250 MD75/250V MD0/500 MD225/1000 BAMBI AIR COMPRESSORS LTD 2 Thimble Mill Lane Heartlands Birmingham
More informationAutomatic extractor outlet
L-07-2-01e Automatic extractor outlet Type HFA Contents Application Realisation Operation Safety instructions Contents Application Realisation Operation Safety instructions 2 Connection diagram Dimensions
More informationBARNES PROSSER CROWN SERVICE PARTS
MODEL PART NO. SGV3002L 084798 SGV3022L 084799 SGV3062L 084800 SGV3032L 084801 SGV3042L 084802 SGV3052L 088861 SGV5002L 084803 SGV5022L 084804 SGV5062L 084805 SGV5032L 084806 SGV5042L 084807 SGV5052L 088862
More informationIndustrial TE-5.5-MD-CK. Applications. Features. Construction
Industrial TE-5.5-MD-CK Applications Circulation of highly corrosive acids, alkalis, solvents, brine, plating solutions, sterile solutions, and other highly corrosive chemicals and solutions that are compatible
More informationFRANKLIN MOTOR DATA BOOKLET
FRANKLIN MOTOR DATA BOOKLET We Keep You In The Game! 8100 AMF Drive Mechanicsville, VA 23111 1-866-460-QAMF (7263) FRANKLIN MOTOR PARTS - QubicaAMF PART NUMBERS Item Qty Description 785 502 261 60Hz Combo
More informationCompresor lg de BTU modelo QP325KCB
Compresor lg de 24000 BTU modelo QP325KCB Compresor lg de 24000 BTU modelo QP325KCB Ref. No. LGETA-140115-1576 Issued Date 2014.01.15 0.Revision History Rev. No. Rev. 0 Rev. Date - Data Rev. No Rev. description
More informationWELDING POSITIONER MODEL NO:
WELDING POSITIONER WP-250 13-3/4 Diameter Table 0 to 5.5 RPM Rotation Speed Manual Tilt Adjustment 0 to 90 Tilting Angle Standard w/foot Control Switch Shipping Weight 113 lbs. Designed for rotation of
More informationT Y P E V S A B M S E W A G E P U M P
Pe r fo r m a n ce C h a r t s 11 1 D R Y P I T S B U L L E T I N 2 3 9 8 7 6 5 4 3 2 1 12 11 1 / 4 1 1 / 2 9 3 / 4 9 5% 3 HP 5 HP 7 1/2 HP 1 HP 76% 5% C u r v e P a g e V S A B M - 4 1 1 5 R P M M O D
More informationREPLACEMENT PARTS LIST FOR MODELS: Consult factory for all other models
Your Peace of Mind is Our Top Priority Product information presented here reflects conditions at time of publication. Consult factory regarding discrepancies or inconsistencies. MAIL TO: P.O. BOX 134 Louisville,
More informationREPAIR PART NUMBER NUMBER DESCRIPTION 0137 ELE 0136 ELE 12 VOLT SOLENOID
PART REPAIR PART NUMBER NUMBER DESCRIPTION 0137 ELE 0136 ELE 12 VOLT SOLENOID 0203 WHL 0250 WHL WHEEL HUB 0251 WHL AXLE 0252 WHL DUST CAPS 0253 WHL TIRE - 210 SP 0204 WHL 0211 WHL TIRE & WHEEL - SP 0250
More informationNOTE: Parts are no longer available for this tool. The manual will continue on the next page.
NOTE: Parts are no longer available for this tool. The manual will continue on the next page. Form Z455 Date 12-97/D Page 1 of 6 INSTRUCTIONS & PARTS LIST FOR SIOUX 8200 POLISHER GENERAL SAFTEY RULES READ
More information6146XX-X OPEN STYLE HOSE REELS
OPERATOR S MANUAL INCLUDING: OPERATION, INSTALLATION & MAINTENANCE 6146XX-XXX OPEN STYLE HOSE REELS LOW, MEDIUM & HIGH PRESSURE (FOR AIR, WATER & PETROLEUM PRODUCTS) 6146XX-X RELEASED: 2-5-90 REVISED:
More informationRIX COMPRESSORS. MICROBOOST Owner s Manual CONFIGURATION A MB-115 MB-230. November 21, 2002 APPLICABILITY [ A]
RIX COMPRESSORS MICROBOOST Owner s Manual CONFIGURATION A MB-115 MB-230 November 21, 2002 APPLICABILITY [ A] INTRODUCTION Safety This electromechanical equipment is designed to produce high pressure gas.
More informationW01 Rolled Steel Fractional Horsepower Motor
Motors Automation Energy Transmission & Distribution Coatings Fractional Horsepower Motor Technical Catalogue NEMA Market The new generation of WEG general purpose steel motors. The motors of the line
More informationASM. Asynchronous Spindle Motors. SEM Limited Faraday Way Orpington, Kent BR5 3QT United Kingdom
NE ASM Asynchronous Spindle Motors SEM Limited Faraday Way Orpington, Kent BR 3QT United Kingdom Tel: +44 ()189 8847 Fax: +44 ()189 884884 Email: sales@sem.co.uk Web: www.sem.co.uk Version 4 August 2 Asynchronous
More informationOPERATION AND MAINTENANCE INSTRUCTION MANUAL
OPERATION AND MAINTENANCE INSTRUCTION MANUAL AA-74 AIRPAC COMPRESSOR - 120 VOLT - TABLE OF CONTENTS: Introduction.........................1 Package Contents....................1 Operation...........................2
More information(1) Warranty Certificate 01. (2) About the use of Traction Machine 03. (3) General Instructions 03. EMC Directive 03. Copy Right Low 03.
01 (1) Warranty Certificate 01. (2) About the use of Traction Machine 03. (3) General Instructions 03. EMC Directive 03. Copy Right Low 03. Sign - Symbol - Interpretation & Meaning 04. (4) Technical Drawing
More informationATV 90 Y-12 YOUTH 2-STROKE RED (A2004ATB2BUSR) Page 1 of 52 A-ARM, FLOOR PANEL, AND BUMPER ASSEMBLY
2004 ATV 90 Y-12 YOUTH 2-STROKE RED (A2004ATB2BUSR) Page 1 of 52 A-ARM, FLOOR PANEL, AND BUMPER ASSEMBLY 2004 ATV 90 Y-12 YOUTH 2-STROKE RED (A2004ATB2BUSR) Page 2 of 52 A-ARM, FLOOR PANEL, AND BUMPER
More informationDean Pump Self-Priming Chemical Process Pumps
Bulletin C 1.2.34.7 Dean Pump Self-Priming Chemical Process Pumps php Series HEAD CAPACITY RANGE CHARTS php Self Primer - 2 Pole 3500 RPM 500 CAPACITY M 3 /HR 2900 RPM 50 HERTZ 25 50 75 125 150 400 TOTAL
More informationReproduction. Not for 27" & 29" TWO STAGE INTERMEDIATE SNOWTHROWERS Parts Manual for M1227E M1227EX M1529E
Parts Manual for 27" & 29" TWO STAGE INTERMEDIATE SNOWTHROWERS 2011 Model No. Description 1696001 M1227E 1696002 M1227EX 1696003 M1529E Briggs & Stratton Yard Power Products Group 535 Macon Road McDonough,
More informationSPECIFICATIONS Type: Twin stack, single phase Tank: 4 gallon Air Output: PSI; PSI Max PSI: 125 PSI HP: 1.
2 GALLON TWIN STACK AIR COMPRESSOR Model: 9526 DO NOT RETURN TO STORE. Please CALL 800-348-5004 for parts and service. CALIFORNIA PROPOSITION 65 WARNING: You can create dust when you cut, sand, drill or
More informationOWNER S MANUAL INSTALLATION AND OPERATING INSTRUCTIONS REPAIR PARTS LIST
OWNER S MANUAL INSTALLATION AND OPERATING INSTRUCTIONS REPAIR PARTS LIST SSCX AND SSCXS SERIES CENTRIFUGAL PUMP High Head Model ODP MOTORS TEFC MOTORS HP Number 115/230/60/1 208-230/460/60/3 115/230/60/1
More informationCOOPER POWER SERIES. 50 A 2:1 series multiple (dual voltage) switch cap/wrench, lever or hotstick operable handles installation instructions
Voltage Regulators MN800013EN Effective February 2016 Supersedes S800-70-1 August 2012 COOPER POWER SERIES 50 A 2:1 series multiple (dual voltage) switch cap/wrench, lever or hotstick operable handles
More informationPLEASE READ CAREFULLY BEFORE INSTALLING OR USING MEGA POOL SAVER MPS 1100
MPS-1100 User Manual Mega Pool Saver Ltd PLEASE READ CAREFULLY BEFORE INSTALLING OR USING MEGA POOL SAVER MPS 1100 For further up to date instructions on how to install Mega Pool Saver MPS 1100, please
More informationFOR INSTALLING CO 2 BLENDER KIT (P/N IN BEER SYSTEM
IMI CORNELIUS INC One Cornelius Place Anoka, MN 55303-623 Telephone (800) 238-3600 Facsimile (612) 22-326 INSTALLATION INSTRUCTIONS FOR INSTALLING CO 2 BLENDER KIT (P/N 111612000 IN BEER SYSTEM SECONDARY
More informationOMS Technical Information. Versions OMS. Versions
Versions Versions Mounting flange Shaft Port size European version US version Drain connection Check valve Main type designation Standard flange Cyl. 32 G 1/2 l Yes Yes Cyl. 1.25 in 7/8-14 UNF l Yes Yes
More informationMODEL 300 BACKLAPPER OWNERS MANUAL
MODEL 300 BACKLAPPER OWNERS MANUAL Neary Technologies 1173 Benson Street River Falls, WI 54022 1 Manual No. 30019 (7-07) SAFETY INSTRUCTIONS Safety Awareness Symbols are inserted into this manual to alert
More informationCM MBC & CM MBC PARTS LIST
8650 Enterprise Drive, Peosta IA 52068 319-556-7484 / Fax 319-556-1235 CM-1500-0MBC & CM-1503-1MBC Engine Oil Grade: Engine Oil Capacity: Pump Oil Grade: Pump Oil Capacity: Nozzle Size: PARTS LIST (After
More informationSpare Parts catalogue 2012
Spare Parts catalogue 2012 TriFlo Pump Number Description Part # Pump Model Quantity 1 Barrel Union Nut 9-2008 AH, XH, ET, ST, SK 2 2 Barrel Union Pipe Socket 9-2007 AH, XH, ET, ST, SK 2 3 O-ring Barrel
More information100C Air Compressor Kit
10010 100C Air Compressor (standard mounting bracket, CE Spec) 10014 100C Air Compressor (no leader hose or check valve, CE Spec) 10016 100C Air Compressor (with Omega Bracket, CE Spec) IMPORTANT: It is
More informationNikuni KTM Series Pumps
Nikuni KTM Series Pumps ( Micro Bubble Generator for DAF System ) Client : Project : Model : KTM2F- (Cast Iron/SS material fittings) Date : Doc. No. : Revision No. : Japan Headquarters : 843-5, Kuji, Takatsu-Ku,
More informationOperating Instructions Model and Hydrostatic Test Pump
Operating Instructions Model 39300 and 39301 Hydrostatic Test Pump Dimension Weight Pump Style Capacity Pressure Motor Lubrication Control Gauge Inlet Connection Outlet Connection Discharge Hose Hose Ends
More informationIMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS CAUTION - To reduce risk of electrical shock: - Do not disassemble. Do not attempt repairs or modifications. Refer to qualified service agencies for all service and repairs.
More informationHazardous Duty Division 1 Explosion Proof Class I Only, Groups C (as noted), D
lass I Only, Groups (as noted), D Blue hip, EPAct Efficiency, Three Phase 10:1 Variable torque, 2:1 onstant torque 1.15 Service Factor lass F insulation Meets temperature code T2A All ast iron construction
More informationDifferential Pressure Regulator Type Type 45-6 (0.1 to 1 bar, DN 15) Mounting and Operating Instructions EB 3226 EN
Differential Pressure Regulator Type 45-6 Type 45-6 (0.1 to 1 bar, DN 15) Mounting and Operating Instructions EB 3226 EN Edition March 2008 Contents Contents Page 1 Design and principle of operation...................
More informationParts Manual STRIKER Striker 2840 Parts List - PN Printed in USA 03/18/08
Parts Manual STRIKER 2840 Striker 2840 Parts List - PN 238155 - Printed in USA 03/18/08 Standard Parts Recommended General Wear Parts Ref No Part Description Qty Part No 1 Squeegee Hose Assembly
More informationAPAS - 72 Parts Manual
VERSION HISTORY The table below summarizes the history of this document as it is published onto the company website(s). It identifies the version, date of issue and revisions and changes. VERSION DATE
More informationESE SERIES. Series Overview. Specifications
Series Overview + Compact Capsule Design + Fully Compliant With IEEE 802.3 Formats + 100Base-T / 1000Base-T Ethernet Cable + T568B Wiring Terminated With RJ45 Connectors + High Quality Gold on Gold Contacts
More informationGT22 Trimmer/Brushcutter UT Page 1 of 16 Accessories
GT22 Trimmer/Brushcutter UT-26039 Page 1 of 16 Accessories GT22 Trimmer/Brushcutter UT-26039 Page 2 of 16 Accessories Ref # Part Number Qty S/P/F Description 1 UP00578 1 TOOL KIT 2 DG07819 1 /P STRAP 3
More information400H HARDMOUNT AIR COMPRESSOR KIT PART NO H HARDMOUNT AIR COMPRESSOR KIT PART NO
400H HARDMOUNT AIR COMPRESSOR KIT PART NO. 40042 450H HARDMOUNT AIR COMPRESSOR KIT PART NO. 45042 400H 450H IMPORTANT: It is essential that you and any other operator of this product read and understand
More informationLibrary of Set Points for PVIGPS.M. Factory settings for Intelipro PV
Library of Set Points for PVIGPS.M Factory settings for Intelipro PV Set Point Default Range Step Mains CT Ratio [A/5A] 400 1A/5A 25000A/5A A/5A Mains CT Polar Forward Forward Reverse EF CT Ratio [A/5A]
More informationPage - CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 ITEM QUANTITY FOR MODEL 302
CONTENTS. Page - SPECIFICATIONS 200 SPECIFICATION 200 SELECTION CHART PFC 201 SELECTION CHART 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 2 204 PERFORMANCE CURVE 3 205 PERFORMANCE CURVE
More informationWINCH USER GUIDE WARN 3000ACI Utility Winch Part Number: 93000
WINCH USER GUIDE WARN 3000ACI Utility Winch Part Number: 93000 Your safety, and the safety of others, is very important. To help you make informed decisions about safety, we have provided installation
More informationParts. Ultra 395/495/595t Ultra Max II 490/495/595t S. Korean patent VAC psi (228 bar, 22.8 MPa) Maximum Working Pressure
Parts Ultra 395/495/595t Ultra Max II 490/495/595t Korean patent 10--0579681 309675S EN 3300 psi (228 bar, 22.8 MPa) Maximum Working Pressure 0 VAC Type Stand Series Lo-boy Series Hi-boy Series Ultra 395t
More informationExchange Part# 2018 List Price
List 21824-1-10PK 10 PK -FUSE-3AG-TIME DELAY-.25x1.25L-1A $15 N/A N/A N/A 25151-1 29" LEXAN TUBE FOR LATHE WORKLIGHT $114 N/A N/A TUBE FOR 29 WORK LIGHT REPLACES - 22287-1840SX, R UNIT NOT NORMALLY IN
More informationGX200 QX2 ENGINE, JPN, VIN# GCAE Page 1 of 34 AIR CLEANER (DUAL)
GX200 QX2 ENGINE, JPN, VIN# GCAE-1000001 Page 1 of 34 AIR CLEANER (DUAL) GX200 QX2 ENGINE, JPN, VIN# GCAE-1000001 Page 2 of 34 Ref # Part Number Qty Description AIR CLEANER (DUAL) 1 16271-ZE1-000 1 GASKET,
More informationIntroduction INDEX. INTRODUCTION HSE
Introduction INDEX SECTION PAGE INTRODUCTION ORDERING CODE GLOSSARY MOTOR OPTION TECHNICAL SE SE3 / SE5 SE7 / S7 SE9 / S9 SE12 / S12 SE14 / S14 SE14-2 / S14-2 SE17 / S17 SE17-2 / S17-2 SE21 / S21 SE21-2
More information*NOTE: 75 OHM SERIES CONNECTORS ARE NOT INTERMATEABLE WITH THE 50 OHM SERIES.
The Connex N connectors with screw coupling are fully interchangeable with N connectors made to the MIL-C-39012 specification. Designed for use in all systems where very good R.F. and mechanical performance
More informationNikuni KTM Series Pumps
Nikuni KTM Series Pumps ( Micro Bubble Generator for DAF System ) Client : Project : Model : KTM2N- (SS34 Material) Doc. No. : Date : Revision No. : Japan Headquarters : 843-5, Kuji, Takatsu-Ku, Kawasaki-Shi,
More informationVERTICAL TURBINE PUMPS Right Angle Gears. Shaft Guarding for Horizontal Mounted Spicer Universal Joint Drive Shafts
Peerless Pump Company Indianapolis, IN 46207-7026 VERTICAL TURBINE PUMPS Right Angle Gears SECTION 110 Page 1 January 2, 2007 Shaft Guarding for Horizontal Mounted Spicer Universal Joint Drive Shafts A
More informationAPPLICATION. Conveyors Metal working machines Machines for agriculture Road building machines Mining machinery Food industries
HYDRAULIC APPLICATION Conveyors Metal working machines Machines for agriculture Road building machines Mining machinery Food industries Special vehicles Plastic and rubber machinery etc. CONTENTS Specification
More informationACCESSORIES FOR LANCASTER PUMPS & WATER SYSTEMS INDEX
PAGE 1 ACCESSORIES FOR LANCASTER PUMPS & WATER SYSTEMS INDEX ADAPTERS PAGE OFFSET CASING ADAPTER 2 PITLESS ADAPTER 2 ROPE ADAPTER 4 VENTURI MALE ADAPTER 2 AIR VALUME CONTROL AIR VALVES 2 CABLE SUBMERSIBLE
More informationAIR COMPRESSOR. Failure to follow all instructions as listed below may result in electrical shock, fire, and/or serious personal injury.
2 GALLON AIR COMPRESSOR Model: 7517 DO NOT RETURN TO STORE. Please CALL 800-348-5004 for parts and service. CALIFORNIA PROPOSITION 65 WARNING: You can create dust when you cut, sand, drill or grind materials
More informationOperating Instructions Models and Hydrostatic Test Pumps
Operating Instructions Models 33100 and 33101 Hydrostatic Test Pumps 33100 DIMENSIONS: WEIGHT: PUMP: MOTOR: CONTROL: GAUGE: DISCHARGE HOSE: 16 (40cm) L x 22 (55cm) W x 18 (45cm) H 87 lbs., 39.5 kg Triplex
More informationPost Hole Digger SA P Parts Manual. Copyright 2018 Printed 01/29/18
Post Hole Digger SA20 37305 317-215P Parts Manual Read the Operator's Manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life
More information1020 Industrial Drive, Orlinda, TN fax
Operation Manual Tank Distribution System A-UPT Series 615-654-4441 sales@specialtyh2o.com 615-654-4449 fax TABLE OF CONTENTS Section 1 GENERAL 1.2 Warnings and Cautions... 1 1.2 Theory of Operation...
More informationAIR COMPRESSOR OPERATION & MAINTENANCE INSTRUCTIONS MODEL NO: CHAMP 3 PART NO: LS0115
AIR COMPRESSOR MODEL NO: CHAMP 3 PART NO: 2225222 OPERATION & MAINTENANCE INSTRUCTIONS LS0115 INTRODUCTION Thank you for purchasing this CLARKE Air Compressor. Please read this manual fully before use
More information200 PSI COMPRESSORS - MODEL NUMBERS
200 PSI COMPRESSORS - MODEL NUMBERS 380C AIR COMPRESSOR KIT PART NO. 38033 480C AIR COMPRESSOR KIT PART NO. 48043 380C 480C IMPORTANT: It is essential that you and any other operator of this product read
More informationNikuni KTM Series Pumps
Nikuni KTM Series Pumps ( Micro Bubble Generator for DAF System ) Client : Project : Model : KTM5S3- (SS34 material) Date : Doc. No. : Revision No. : Japan Headquarters : 843-5, Kuji, Takatsu-Ku, Kawasaki-Shi,
More informationREPLACEMENT PARTS LIST FOR MODELS:
Product information presented here reflects conditions at time of publication. Consult factory regarding discrepancies or inconsistencies. MAIL TO: P.O. BOX 16347 Louisville, KY 406-0347 SHIP TO: 3649
More information250C-IG COMPRESSOR KIT 12V PART NO C-IG COMPRESSOR KIT 24V PART NO
250C-IG COMPRESSOR KIT 12V PART NO. 25050 250C-IG COMPRESSOR KIT 24V PART NO. 25058 IMPORTANT: It is essential that you and any other operator of this product read and understand the contents of this manual
More information250C-IG COMPRESSOR KIT 12V PART NO C-IG COMPRESSOR KIT 24V PART NO
250C-IG COMPRESSOR KIT 12V PART NO. 25050 250C-IG COMPRESSOR KIT 24V PART NO. 25058 IMPORTANT: It is essential that you and any other operator of this product read and understand the contents of this manual
More information420C AIR COMPRESSOR KIT PART NO C AIR COMPRESSOR KIT PART NO
420C AIR COMPRESSOR KIT PART NO. 42042 460C AIR COMPRESSOR KIT PART NO. 46043 420C 460C IMPORTANT: It is essential that you and any other operator of this product read and understand the contents of this
More informationSPARE PARTS LIST BRUSHCUTTERS/CLEARING SAWS FC2145 W,
SPARE PARTS LIST BRUSHCUTTERS/CLEARING SAWS FC2145 W, 2010-09 ACCESSORIES FC2145 W, 2010-09 ACCESSORIES FC2145 W, 2010-09 Ref Part No Description Remark QTY KIT 1 502 21 60-13 ACCESSORY BAG 1 2 501 60
More informationHYDRAULIC MOTORS MTM APPLICATION OPTIONS CONTENTS EXCELLENCE GENERAL
HYDRAULIC OORS APPLICAION» Skid Steer Loaders» etal working machines» renchers» Augers» Agricultural machines» Road building machines» Special vehicles» ine machines» Woodworking and sawmill machinery»
More informationREPLACEMENT PARTS LIST FOR MODELS:
Your Peace of Mind is Our Top Priority Product information presented here reflects conditions at time of publication. Consult factory regarding discrepancies or inconsistencies. MAIL TO: P.O. BOX 16347
More informationIMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS CAUTION - To reduce risk of electrical shock or electrocution: - Do not disassemble. Do not attempt repairs or modifications. Refer to qualified service agencies for all service
More informationSpectraPure PUMPED RO SYSTEMS (PSP) User s Manual for PSP-1500 Systems
SpectraPure PUMPED RO SYSTEMS (PSP) User s Manual for PSP-1500 Systems 2 3 PSP-1500 SYSTEM DESCRIPTION Reverse Osmosis RO Reverse Osmosis utilizes the unique properties of a semi-permeable membrane to
More informationThe Limit Switch with Better Seal, Shock Resistance, and Strength. General-purpose Limit Switch. Model Number Structure
General-purpose Limit Switch CSM_DA-_N_DS_E The Limit Switch with Better Seal, Shock Resistance, and Strength A double seal on the head, a complete gasket cover, and other features ensure a better seal
More informationGT20 String Trimmer UT Page 1 of 16 Accessories
GT20 String Trimmer UT-26037 Page 1 of 16 Accessories GT20 String Trimmer UT-26037 Page 2 of 16 Accessories Ref # Part Number Qty S/P/F Description 1 PS01443 1 TOOL KIT 2 DG07819 1 /P STRAP 3 G07830 1
More informationRocky Mountain Instinct / Pipeline Alloy Frame Assembly Guide. Date: April 7, 2017
Rocky Mountain Instinct / Pipeline Alloy Frame Assembly Guide Date: April 7, 2017 1 Table of Contents Front Triangle Preparation... 4 Parts Needed... 4 Instructions... 4 Chain Stay Preparation... 6 Parts
More informationLIST NO.E078 ENGINE. ENGINE BRUSH CUTTER Model CG 27EAS (E1)
LIST E078 (E1) ENGINE ENGINE BRUSH CUTTER Model 2010 7 16 A B 1 2 1 3 4 5 6 7 16 15 17 13 8 9 10 11 12 13 14 15 18 19 20 11 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46
More informationNikuni KTM Series Pumps
Nikuni KTM Series Pumps ( Micro Bubble Generator for DAF System ) Client : Project : Model : KTM8F- (Cast Iron/SS material fittings) Date : Doc. No. : Revision No. : Japan Headquarters : 843-5, Kuji, Takatsu-Ku,
More informationGeneral Purpose Three Phase Open Dripproof (ODP) NEMA Premium Efficient IE3
General Purpose Three Phase Open Dripproof (ODP) Premium Efficient IE3 GENERAL APPLICATIONS: For pumps, fans, compressors, material handling, and other general purpose applications where contaminants are
More informationPost Hole Digger AP-SA PK Parts Manual. Copyright 2018 Printed 07/11/18
Post Hole Digger AP-SA20 37692 317-215PK Parts Manual Read the Operator's Manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your
More informationSPARE PARTS LIST BRUSHCUTTERS/CLEARING SAWS BC2145,
SPARE PARTS LIST BRUSHCUTTERS/CLEARING SAWS BC2145, 2010-09 ACCESSORIES BC2145, 2010-09 ACCESSORIES BC2145, 2010-09 Ref Part No Description Remark QTY KIT 1 502 21 60-13 ACCESSORY BAG 1 2 501 60 02-03
More informationRARS5000 AIR BODY SAW OWNER S OPERATING MANUAL
RARS5000 AIR BODY SAW OWNER S OPERATING MANUAL DESCRIPTION 1. No mar 2. No mar tip 3. Housing grip 4. Trigger 5. Air inlet 6. Air inlet plug 7. Plastic board Important! It is essential that you read the
More information100L AIR COMPRESSOR MODEL NO: TIGER 16/1010 PART NO: OPERATION & MAINTENANCE INSTRUCTIONS LS01/13
100L AIR COMPRESSOR MODEL NO: TIGER 16/1010 PART NO: 2244025 OPERATION & MAINTENANCE INSTRUCTIONS LS01/13 INTRODUCTION Thank you for purchasing this product. Before attempting to use this product, please
More informationTurbo Blowers. Combustion Excellence Since Features. Benefits
Turbo Blowers Features Integral molded scroll design Turbine bladed impeller Steel inlet guard Precisely balanced impellers eliminate vibration Complete line of available accessories for adapting to any
More informationRP series Rotor Pumps
ontact etails RP series Rotor Pumps Nomenclature Features Low noise Substantial reduction of the operation noise, by to db (comparison with aikin products), and improved sound quality are achieved by adopting
More informationG SERIES METRIC MACHINE SCREW ACTUATOR
G SERIES METRIC MACHINE SCREW ACTUATOR kn to 0kN Duff-Norton metric actuators are manufactured to the same high quality standards and include all the same features and benefits as the standard line of
More information1. PARTS INTRODUCTION ELECTRICAL NOTES INSTALLATION 5/6. 5. START UP 6/7. 6. MAINTENANCE 7/8/9. 7. PRESSURE SWITCH ADJUSTMENTS 9/10.
CONTENTS 1. PARTS 3. 2. INTRODUCTION 4. 3. ELECTRICAL NOTES 5. 4. INSTALLATION 5/6. 5. START UP 6/7. 6. MAINTENANCE 7/8/9. 7. PRESSURE SWITCH ADJUSTMENTS 9/10. 8. ELECTRICAL CONNECTIONS 10/11. 9. SPECIFICATIONS
More informationVSD03M DIRECTIONAL CONTROL VALVES
NFPA SIZE D03 TYPICAL PERFORMANCE SPECIFICATIONS Performance is measured on a four-way circuit (full circuit). Performance may e reduced from that shown if a three-way circuit (half circuit) is used, i.e.
More informationMeter, PD Series, E3 S6, S7 All Parts List
Issue/Rev. 0.0 (3/13) Meter, PD Series, E3 S6, S7 All Parts List Bulletin PO01005 32 68 29 17 68 16 14 19 15 68 20 54 22 18 24 58 23 10 59 41 31 56 55 57 47 52 25 27 34 34 26 40 67 44 39 The Most Trusted
More informationMeter, PD Series, E3 A1, S1 and E4 S1 Prior to 2005 Parts List
Issue/Rev. 0.0 (2/13) Meter, PD Series, E3 A1, S1 and E4 S1 Prior to 2005 Parts List Bulletin PO01001 33 Pre 1994 39 32 31 21 Pre 1994 45 18 48 44 30 78 57 46 Note: Angled housing not shown. The Most Trusted
More informationCopyright MAY, 2008 By Grizzly Industrial, Inc. Warning: No portion of this manual may be reproduced in any shape or form without the written
MODEL G5791/G5792 17-PIECE 1 2" IMPACT WRENCH & RATCHET KIT INSTRUCTION MANUAL Copyright MAY, 2008 By Grizzly Industrial, Inc. Warning: No portion of this manual may be reproduced in any shape or form
More informationHydrotherapy Jets System for a Fiberglass Pool
Page 1 of 5 Parts List 1-50 Flex PVC pipe 2-1 1 / 2 " Ball Valves 4-1/2" 90 degree elbows 4 - Lengths of 1/2" PVC 4 - Jet bodies 4 - Jet nozzles 6 - Female slip/female slip unions 2 - Female slip/fpt union
More informationDLE5.7CN V/60Hz 1~
dle57cn_102h3682_r290_115v_60hz_06-18_ds.xlsx Sales code: 102H3682 1~ design Oil type Polyolester Refrigerant(s) R290 Oil viscosity 32cSt Displacement 5,7cm³ / 0,35cu.in Oil quantity 221cm³ / 7,5fl.oz
More informationInstallation Instructions
116-3027, 116-3017 X-Pando Adjustable Steel Protector Installation Instructions 1404 N. Marshall Ave. El Cajon CA. 92020 For technical support call us at (800) 368-3075 NB 6/28/10 607-0112 Step 1. Mounting
More informationSubmersible Electric Pumps for drainage of clean and slightly dirty water DIWA Series
Submersible Electric Pumps for drainage of clean and slightly dirty water DIWA Series Submersible pumps for clean and slightly dirty water manufactured in AISI 304 stainless steel. Head up to 20 metres,
More informationDP Spare parts list. Demolition pulverizer. DP 2800 s/n DEQ Construction Tools GmbH No
DP 2800 Spare parts list Demolition pulverizer DP 2800 s/n DEQ139266-2018 Construction Tools GmbH No. 3390719501 2018-01-01 General information This spare parts list applies to the following: Part number
More informationHYDRAULIC MOTORS MV APPLICATION GENERAL
HYDRAULIC V APPLICAION» Conveyors» etal working machines» Agriculture machines» Road building machines» ining machinery» Food industries» Special vehicles» Plastic and rubber machinery etc. CONENS Specification
More informationDUAL 444C ONBOARD AIR SYSTEM
DUAL 444C ONBOARD AIR SYSTEM PART NO. 20019 IMPORTANT: It is essential that you and any other operator of this product read and understand the contents of this manual before installing and using this product.
More information400C & 450C DUAL PERFORMANCE VALUE PACKS
(Chrome) PART NO. 40013 (Silver) PART NO. 45012 (Chrome) PART NO. 45013 IMPORTANT: It is essential that you and any other operator of this product read and understand the contents of this manual before
More informationThe X-11 Molding Chamber
The User Guide to The X-11 Molding Chamber Table of Contents Overview of Features & Specifications... 3 Features... 4-5 Safety & Maintenance... 6 Initial Startup Procedure... 7 Using the X-11... 8-9 Using
More information