IMPORTANT SAFETY INSTRUCTIONS

Transcription

1 INSTRUCTION BOOK

2 IMPORTANT SAFETY INSTRUCTIONS This applianc is not intndd fo us by psons (including childn) ith ducd physical, snsoy o mntal capabilitis, o lack of xpinc and knoldg, unlss thy hav bn givn supvision o instuction concning us of th applianc by a pson sponsibl fo thi safty. Childn should b supvisd to nsu that thy do not play ith th applianc. Whn using an lctical applianc, basic safty pcautions should alays b follod, including th folloing: This sing machin is dsignd and manufactud fo houshold us only. Rad all instuctions bfo using this sing machin. DANGER To duc th isk of lctic shock: 1. An applianc should nv b lft unattndd hn pluggd in. Alays unplug this sing machin fom th lctic outlt immdiatly aft using and bfo claning. 2. Alays unplug bfo placing a sing machin bulb. Rplac bulb ith sam typ atd 15 Watts. WARNING To duc th isk of buns, fi, lctic shock, o injuy to psons: 1. Do not allo to b usd as a toy. Clos attntion is ncssay hn this sing machin is usd by o na childn. 2. Us this applianc only fo its intndd us as dscibd in this on s manual. Us only attachmnts commndd by th manufactu as containd in this on s manual. 3. Nv opat this sing machin if it has a damagd cod o plug, if it is not oking poply, if it has bn doppd o damagd, o doppd into at. Rtun this sing machin to th nast authoizd dal o svic cnt fo xamination, pai, lctical o mchanical adjustmnt. 4. Nv opat th applianc ith any ai opning blockd. Kp vntilation opnings of this sing machin and foot contoll f fom accumulation of lint, dust and loos cloth. 5. Nv dop o inst any objct into any opning. 6. Do not us outdoos. 7. Do not opat h aosol (spay) poducts a bing usd o h oxygn is bing administd. 8. To disconnct, tun all contols to th off ( O ) position, thn mov plug fom outlt. 9. Do not unplug by pulling on cod. To unplug, gasp th plug, not th cod. 10. Kp fings aay fom all moving pats. Spcial ca is uid aound th sing machin ndl. 11. Alays us th pop ndl plat. Th ong plat can caus th ndl to bak. 12. Do not us bnt ndls. 13. Do not pull o push fabic hil stitching. It may dflct th ndl causing it to bak. 14. Sitch this sing machin off ( O ) hn making any adjustmnt in th ndl aa, such as thading th ndl, changing th ndl, thading th bobbin o changing th pss foot, and th lik. 15. Alays unplug this sing machin fom th lctical outlt hn moving covs, lubicating, o hn making any oth adjustmnts mntiond in this on s manual. SAVE THESE INSTRUCTIONS Plas not that on disposal, this poduct must b safly cycld in accodanc ith lvant National lgislation lating to lctical/lctonic poducts. If in doubt plas contact you tail fo guidanc. (Euopan Union only)

3 TABLE OF CONTENTS SECTION I. ESSENTIAL PARTS Nam of Pats... 2 Extnsion Tabl... 3 F Am Sing... 3 Standad Accssois... 3 Accssois Stoag Box... 3 SECTION II. GETTING READY TO SEW Conncting th Machin to th Po Supply... 4 Contolling Sing Spd... 4 Pss Foot Lift... 5 Changing Pss Foot... 5 To Attach and Rmov th Foot Hold... 5 Changing Ndls... 6 To chck th ndl... 6 Thad and Ndl Chat... 6 Stting Spool Pins... 7 Rmoving o Insting th Bobbin Cas... 7 Winding th Bobbin... 8 Thading Bobbin Cas... 8 Thading th Machin... 9 Daing Up Bobbin Thad Thad Tnsion Dial Stitch Slcto Dial Stitch Lngth Dial Rvs Stitch Button Daning Plat SECTION V. DECORATIVE STITCHING Shll Tuck Smocking Appliu Sttch Stitch Pattns SECTION VI. TAKING CARE OF YOUR MACHINE Claning th Bobbin Cas and th Hook Dismantling Shuttl Rac Unit Assmbling Shuttl Rac Unit Claning th Fd Dog Sing Light Toublshooting SECTION III. BASIC SEWING Staight Stitch Sing Sam Guid Lins Tuning a Sua Con Zigzag Stitching SECTION IV. UTILITY STITCHING Ticot Stitch Knit Stitch Staight Sttch Rick-ack Sttch Sing Buttons Buttonhol Zipp Application Blind Hm Stitch

4 i u y t SECTION I. ESSENTIAL PARTS Nam of Pats o!0 Rvs stitch button Pattn slcto dial Stitch lngth dial!1 Bobbin ind stopp t Bobbin ind spindl!2 y Spool pins u Bobbin ind thad guid i Thad guid o Thad tak-up lv!0 Thad tnsion dial!3!1 Fac cov!2 Ndl plat!3 Extnsion tabl!4!5!4 Pss foot hold!5 Ndl clamp!6!6 Ndl!7!7 Pss foot!8 Caying handl!9 Po Machin Pss foot Foot contol NOTE: To cay th sing machin, hold th caying handl ith you hand, and suppot th sing machin ith th oth NOTE: Sing machin dsign and spcifications a subjct to chang ithout @4 2

5 Extnsion Tabl Th xtnsion tabl povids addd sing sufac and can b asily movd fo f am sing. Dtaching th tabl: Pull th tabl aay fom th machin. F Am Sing Avoid fabic bunching aound th ndl hn batacking to infoc pockts, plackts and aistlins. Fo stitching slvs, aistbands, pant lgs o any cicula gamnt aa. Fo daning socks o mnding kns, lbos o aas of a in childn's cloths. Standad Accssois Bobbins Sam ipp/ Buttonhol opn Ndl st Sliding buttonhol foot t Blind hm foot y Zipp foot u Daning plat t u y Accssois Stoag Box Sing accssois a convnintly locatd in th xtnsion tabl. Accssois stoag box 3

6 SECTION II. GETTING READY TO SEW Conncting th Machin to th Po Supply t z Tun off th po sitch. x Inst th machin plug into th machin sockt. c Inst th po supply plug into th outlt. v Tun on th po sitch to tun on th po and sing light. Po supply plug Po sitch Outlt Machin sockt t Machin plug CAUTION: Bfo conncting th po cod, mak su th voltag and funcy shon on th machin confom to you lctical po. NOTE: Whil in opation, alays kp you ys on th sing aa, and do not touch any moving pats such as th thad tak-up lv, handhl o ndl. Alays tun off th po sitch and unplug fom th po supply: hn laving th machin unattndd. hn attaching o moving pats. hn claning th machin. Do not plac anything on th foot contol, othis th machin ill un inadvtntly. Opating Instuctions (fo th U.S.A and Canada only) This applianc has a polaizd plug (on blad id than th oth). To duc th isk of an lctic shock, this plug is intndd to fit in a polaizd outlt only on ay. If th plug dos not fit in th outlt, vs th plug. If it still dos not fit, contact a ualifid lctician to install th pop outlt. Do not modify th plug in any ay. Foot Contoll Modl KD-1902, YC-482J-EC o TJC-150 is usd ith this machin. Contolling Sing Spd Sing spd can b vaid by th foot contol. Th had you pss on th foot contol, th fast th machin uns. 4

7 Pss Foot Lift Th pss foot lift aiss and los you pss foot. You can ais it about 0.6 cm (1/4 ) high than th nomal up position fo asy moval of th pss foot o to hlp you to plac havy fabic und th foot. Lost position Nomal up position Highst position Changing Pss Foot Pss foot Goov Pin CAUTION: Whn attaching o moving pss foot, tun OFF th po sitch. To mov Tun th handhl toad you to ais th ndl ba to its highst position. Rais th pss foot. Push th to of th pss foot to snap it off th foot hold. To attach Plac th pss foot so that th pin on th foot lins up dictly blo th goov of th foot hold. Lo th foot hold to lock th foot in plac. To Attach and Rmov th Foot Hold Thumb sc Foot hold Pss ba To mov Rmov th thumb sc by tuning it countclockis ith a scdiv. To attach Match th hol in th foot hold ith th thadd hol in th pss ba. Fit th thumb sc into th hol. Tightn th sc by tuning it clockis ith scdiv. 5

8 Changing Ndls Rais th ndl by tuning th handhl toad you and lo th pss foot. z Loosn th ndl clamp sc by tuning it countclockis. Rmov th ndl fom th clamp. x Inst th n ndl into th clamp ith th flat sid aay fom you. Whn insting th ndl into th clamp, push it up as fa as it ill go and tightn th clamp sc fimly ith th scdiv. To chck th ndl Plac th flat sid of th ndl on somthing flat (ndl plat, glass tc.). Th claanc btn th ndl and flat sufac should b consistnt. Nv us a bnt o blunt ndl. Thad and Ndl Chat * In gnal, fin thads and ndls a usd fo sing thin fabics, and thick thads and ndls a usd fo sing havy fabics. * Alays tst thad and ndl siz on a small pic of th fabic hich ill b usd fo actual sing. * Us th sam thad fo ndl and bobbin. * Whn sing sttch, vy fin fabics and synthtics,us a BLUE TIPPED ndl. Th blu tippd ndl ffctivly pvnts skippd stitchs. Light ight Mdium ight Havy ight Fabics Thad Ndl Siz Cp d Chin, Voil, Fin Silk 9 Lan, Ogandy, Fin Cotton o Gogtt, Fin Synthtic 11 Ticot Fin Cotton Covd Polyst Linns, Cotton, Piué, 50 silk 11 Sg, Doubl Knits, 50 to 80 Cotton o Pcal 50 to Synthtic Cotton Covd Polyst Dnim, Td, 50 silk 14 Gabadin, o Suiting, Dapy and 40 to 50 Cotton 16 Upholsty Fabic 40 to 50 Synthtic Cotton Covd Polyst 6

9 Stting Spool Pins Th spool pins a usd fo holding th spool of thad in od to fd thad to th machin. To us, pull up th spool pin. Push don fo stoag. Rmoving o Insting th Bobbin Cas Opn th hook cov. Hook cov Rais th ndl by tuning th handhl toad you. Tak out th bobbin cas by holding th latch. Latch Whn insting th bobbin cas, plac th hon into th css of th hook ac. Hon 7

10 z b x v n c Winding th Bobbin z Pull th handhl out. x Da th thad fom th spool. Guid th thad aound th bobbin ind thad guid. c Inst th thad though th hol in th bobbin fom th insid to th outsid. Put th bobbin on th bobbin ind spindl. v Push it to th ight. b With th f nd of th thad hld in you hand, dpss th foot contol. Stop th machin hn it has mad a f tuns, and cut th thad clos to th hol in th bobbin. n Dpss th foot contol again. Whn th bobbin is fully ound, stop th machin. Rtun th bobbin ind spindl to its oiginal position by moving th spindl to th lft, and cut th thad. m Push th handhl back into th oiginal position. m NOTE: Rtun th bobbin ind spindl hn th machin stops. z Thading Bobbin Cas z Plac th bobbin into th bobbin cas. Mak su th thad uninds in th diction of ao. x x Pull th thad into th bobbin cas slot. c c Da th thad und th tnsion sping and into th dlivy y. * Lav about 10 cm (4 ) of f thad. 8

11 c z Thading th Machin Rais th tak-up lv to its highst position by tuning th handhl toad you. Rais th pss foot. Plac a spool on th spool pin as shon, ith thad coming fom back of th spool. v b x z Da th thad into thad guid using both hands. z x x Whil holding th thad na spool, da thad don into th tnsion aa and thn aound th chck sping hold. c Fimly da th thad up and though th tak up lv fom ight to lft. v Thn da th thad don and slip it into ndl ba thad guid on th lft. b Thad th ndl y fom font to back. c v b NOTE: You may ant to cut th thad nd ith shap scissos fo asi ndl thading. 9

12 z Daing Up Bobbin Thad z Rais th pss foot and hold th ndl thad lightly ith you lft hand. x c x Tun th handhl sloly toad you ith you ight hand until th ndl gos don and continu tuning th handhl until th takup lv is at its highst position. Lightly da up th ndl thad foming a loop of th bobbin thad. c Pull 10 cm (6 ) of both thads back and und th pss foot. Thad Tnsion Dial y t Coct tnsion Th thad tnsion is adjustd dpnding on th sing matials, lays of fabic and sing mthod. Fo an idal zigzag stitch, th bobbin thad dos not sho on th ight sid (top sid) of th fabic, and th ndl thad shos slightly on th ong sid (bottom sid) of th fabic. Ndl thad (Top thad) Bobbin thad (Bottom thad) Right sid (Top sid) of fabic Wong sid (Bottom sid) of fabic t Thad tnsion dial y Stting mak Ndl thad tnsion is too tight Whn th bobbin thad (bottom thad) appas on th ight sid (top sid) of th fabic, loosn th ndl thad tnsion by moving th dial to a lo numb. Ndl thad tnsion is too loos Whn th ndl thad (top thad) appas on th ong sid (bottom sid) of th fabic, tightn th ndl thad tnsion by moving th dial to a high numb. 10

13 Stitch Slcto Dial Tun th stitch slcto dial to st th stting mak ith th symbol cosponding to th dsid pattn. Stting mak CAUTION To avoid ndl o fabic damag, mak su th ndl is up and out of th fabic hil slcting a stitch. A B C D E F G Stitch Lngth Dial Tun th stitch lngth dial to st th stting mak ith th dsid stitch lngth. Th high th numb, th long th stitch lngth. Stting mak Adjust th dial in th ang hn you s th zigzag stitch. St th dial at S.S. to s th sttch stitch pattn sing. If th sttch stitch pattn is unvn, tun th stitch lngth dial in th diction of to compss it, o + to xpand it. + S.S. 11

14 Rvs Stitch Button As long as you kp th vs stitch button dpssd, th machin ill s in vs. Daning Plat Position th daning plat ith 3 pins on th bottom. Fit th daning plat pins into th ndl plat hols. Th fd dogs ill sho though th daning plat hols. 12

15 SECTION III. BASIC SEWING Staight Stitch Sing Pattn slcto: A o B Pss foot: Zigzag foot Thad tnsion: 2 6 Stitch lngth: z Rais th pss foot and position th fabic ith its dg lining up ith a sam guid lin on th ndl plat. Lo th ndl into th fabic. Lo th pss foot and smooth th thads toad th back. Dpss th foot contol. Gntly guid th fabic along th guid lin ltting th fabic fd by itslf. x Fo fastning th nd of sams, pss th vs stitch lv and s sval vs stitchs. Rais th pss foot and mov th fabic, daing th thads to th back. c Cut th thads ith th thad cutt. Th thads a no th pop lngth to bgin sing th nxt sam. To chang th diction Stop th machin and tun th handhl toad you to bing th ndl don into th fabic. Rais th pss foot. Pivot th fabic aound th ndl to chang sing diction as dsid. Lo th pss foot and continu sing. 13

16 Sam Guid Lins Th numbs on th ndl plat indicat th distanc btn th cnt ndl position and th guidlin. Th numbs in font a cntimts. Th numbs in back a factions of an inch. Numb /8 5/8 6/8 Distanc (cm) Cnt ndl position Guid lins Numbs Tuning a Sua Con To tun a sua con 5/8 (1.6 cm) fom th fabic dg. Stop stitching and lo th ndl by tuning th handhl countclockis. Rais th pss foot and tun th fabic to lin th dg ith th 5/8 (1.6 cm) sam guid. Lo th pss foot and bgin stitching in th n diction. Lin up th fabic dg facing you ith th coning guid shon. Coning guid Zigzag Stitching Pattn slcto: C Pss foot: Zigzag foot Thad tnsion: 2 5 Stitch lngth: Simpl zigzag stitching is idly usd fo ovcasting, sing on buttons, tc. Tun th pattn slcto btn th zigzag stitch (C) and staight stitch (lft position) (B) to adjust th stitch idth. 14

17 SECTION IV. UTILITY STITCHING Ticot Stitch Pattn slcto: D Pss foot: Zigzag foot Thad tnsion: 1 4 Stitch lngth: This stitch is usd to finish th a dg on synthtics and oth fabics that tnd to puck. Plac you fabic to allo a 1.6 cm (5/8") sam. Tim th sam alloanc aft sing. B caful not to cut th stitchs. Knit Stitch Pattn slcto: G Pss foot: Zigzag foot Thad tnsion: 1 4 Stitch lngth: S.S. This knit stitch is idal fo sing sima and sttch vlou bcaus it povids th gatst amount of lasticity and stngth. Plac you fabic to allo a 1.6 cm (5/8 ) sam. Tim th sam alloanc aft sing. B caful not to cut th stitchs. 15

18 Staight Sttch Pattn slcto: A Pss foot: Zigzag foot Thad tnsion: 2 6 Stitch lngth: S.S. This stong, duabl stitch is commndd h both lasticity and stngth a ncssay to nsu comfot and duability. Us it to infoc aas such as cotch and amhol sams as ll as to liminat pucking on knits and sttch fabics. Also us hn constucting itms uiing xta stngth such as backpacks. Rick-ack Sttch Pattn slcto: C Pss foot: Zigzag foot Thad tnsion: 2 6 Stitch lngth: S.S. S on sttch fabics in any aa that you might us a zigzag stitch. This stitch is also usd as a dcoativ topstitch. 16

19 Sing Buttons Pattn slcto: C Pss foot: Zigzag foot Thad tnsion: 3 7 Stitch lngth: Any t Daning plat t Attach th daning plat. Match th hols in th button ith th hoizontal slot on th pss foot. Adjust th stitch idth matching th distanc of th hols in th button. Lo th foot to hold th button in plac. Chck to s if th ndl nts into th hols in th button by tuning th handhl by hand. S about tn (10) stitchs. To stngthn th shank, cut th thads laving about 4.0 (10.0 cm). Bing th ndl thad don though on of th hols in th button and ind it aound th shank. Bing th ndl thad to th ong sid (bottom sid) and knot. Aft button sing is compltd, mov th daning plat. 17

20 Buttonhol Pattn slcto: (BH) Pss foot: Sliding buttonhol foot Thad tnsion: 1 5 Stitch lngth: * Mak a tst buttonhol on a sampl duplicating th fabic, intfacing and sams of th actual gamnt. * Plac th button on th fabic sampl and mak th top and bottom to dtmin th position of th buttonhol. * Us intfacing on sttch fabics. z x (C) (B) c v b m (A) n z Cafully mak buttonhol lngth on fabic. Plac th fabic und th foot ith th buttonhol making unning toad you. x Mov th slid (A) toad you so that th top mak (C) on th slid mts th stat mak (B). Lin up th makings on th foot ith th top mak on th fabic. NOTE: Th scal on th slid is ngavd in cntimts. c St th pattn slcto dial at. S foad until you ach th font making of you buttonhol. Stop sing at a lft stitch. v St th pattn slcto dial at. S 5 stitchs. Stop sing at a ight stitch. b St th pattn slcto dial at. S until you ach th back making of th buttonhol. Stop sing at a ight stitch. n St th pattn slcto dial at. S a f batacks and ais th ndl fom th fabic. St th pattn slcto dial at a staight stitch. S a f locking stitchs. m Rmov th fabic fom th machin and cut th sing thad. Inst a pin insid th batack. Thn cut th opning ith a sam ipp. Tak ca not to cut th stitchs. 18

21 Zipp Application Pattn slcto: A Pss foot: Zipp foot Thad tnsion: 2 6 Stitch lngth: Pin o bast zipp tap to fabic and plac it und th foot. Smooth th thads toad th back and lo th foot. To s th lft sid of th zipp, guid th zipp tth along th dg of th foot and stitch though th gamnt and zipp tap. Tun th fabic and s th oth sid of th zipp in th sam ay as you did th lft sid. Blind Hm Stitch Pattn slcto: E o F Pss foot: Blind hm foot Thad tnsion: 1 3 Stitch lngth: 1 3 [A] [B] z On havyight fabics that avl, th a dg should b ovcast fist. Thn fold th hm, as illustatd, laving 1/4 (0.7 cm) of th hm dg shoing. Wong sid of th fabic 1/4 (0.7 cm) [A] Havy ight fabics [B] Fin o mdium ight fabics t x Position th fabic, so that th ndl at its lftmost position just pics th dg of th fold. c Tun th guid sc to adjust th guid aligning ith th foldd dg. S along th foldd dg guiding th fabic so th ndl catchs th foldd dg. Guid sc Guid t Foldd dg v Aft hmming is compltd, pss togth both sids of th finishd hm. Th top sid of th fabic should sho only th blind stitchs. 19

22 SECTION V. DECORATIVE STITCHING Shll Tuck Pattn slcto: Pss foot: Thad tnsion: 6 8 Stitch lngth: 2 3 G Zigzag foot Us a lightight fabic (ticot, fo xampl). Fold and stitch on th bias. Whn th ndl sings to th ight, allo th ndl to just cla th foldd dg of th fabic. Aft stitching, opn th fabic and ion pss th tucks flat to on sid. NOTE: Incas th ndl thad tnsion to fom pominnt tucks. Smocking Pattn slcto: D Pss foot: Zigzag foot Thad tnsion: 1 4 Stitch lngth: S.S. With th stitch lngth at 4, s staight stitching lins 1 cm (3/8 ) apat, acoss th aa to b smockd. Knot th thads along on dg. Pull th bobbin thads and distibut th gaths vnly. Scu th thads at th oth nd. S th dcoativ stitch btn th gathing stitchs. Pull out th gathing stitchs. 3/8 (1 cm) 20

23 Appliu Pattn slcto: C Pss foot: Zigzag foot Thad tnsion: 1 4 Stitch lngth: Bast (o fus ith ion-on fabic join) appliu pics on th fabic. Stitch aound th appliu making su th ndl falls along th out dg of th appliu. Whn sing cons, lo th ndl don into th fabic. Rais th pss foot and pivot th fabic to th ight o lft. Sttch Stitch Pattns Pattn slcto: A-G Pss foot: Zigzag foot Thad tnsion: 1 4 Stitch lngth: S.S. If foad and vs fds bcom unbalancd du to th typ of fabic, adjust th balanc by tuning th stitch lngth dial as follos: If pattns a compssd, tun th dial toad +. If pattns a dan, tun th dial toad. (S pag 11) 21

24 SECTION VI. TAKING CARE OF YOUR MACHINE Claning th Bobbin Cas and th Hook WARNING: Tun th po sitch off and/o unplug th machin bfo dismantl o claning th machin. Do not dismantl th machin oth than as xplaind in this sction. t CAUTION: Do not sto th machin in a high-humidity aa, na a hat adiato, o in dict sunlight. Dismantling Shuttl Rac Unit Rais th ndl to its highst position and opn th hook cov. Opn th hingd latch of bobbin cas and tak it out of th machin. Opn th hook ac ing holds and mov th shuttl ac ing. Rmov th hook. * Clan th hook ac ith a bush and a soft dy cloth. Bobbin cas Shuttl ac ing hold Shuttl ac ing Shuttl t Shuttl ac Assmbling Shuttl Rac Unit Hold th shuttl by th cnt pin and fit it cafully back into th shuttl ac, foming a pfct cicl ith th shuttl div. Attach th shuttl ac ing making su th bottom pin fits into th notch. Lock th shuttl ac ing by tuning th holds back into position. Inst th bobbin cas. y Pin u Notch Claning th Fd Dog u y CAUTION: Tun off th po sitch and/o unplug th machin bfo claning th fd dog. Rmov th ndl and th pss foot. Rmov th ndl plat stsc and mov th ndl plat. Stsc With a bush, clan out any dust and lint clogging th fd dog tth. Rst th ndl plat. 22

25 Sing Light Th sing light is locatd bhind th fac cov. To chang th bulb, tak th fac cov off th sing machin by moving th stsc. Unplug th po supply bfo changing th bulb. Do not dismantl th machin oth than xplaind in this manual. To mov... Push and tist to th lft. To plac... Push and tist to th ight. WARNING Th bulb may b HOT. Potct you fings hn handling it. 23

26 Toublshooting Condition Caus Rfnc Th ndl thad baks. 1. Th ndl thad is not thadd poply. 2. Th ndl thad tnsion is too tight. 3. Th ndl is bnt o blunt. 4. Th ndl is incoctly instd. 5. Th ndl thad and th bobbin thad a not st poply und th pss foot at th bginning of sing. 6. Th fabic is not dan to th a hn th sing has finishd. 7. Th thad is too havy o too fin fo th ndl. Pag 9 Pag 10 Pag 6 Pag 6 Pag 13 Pag 13 Pag 6 Th bobbin thad baks. Th ndl baks. 1. Th bobbin thad is not thadd poply in th bobbin cas and shuttl. 2. Lint has collctd in th shuttl aa. 3. Th bobbin is damagd and dosn't tun smoothly. 1. Th ndl is incoctly instd. 2. Th ndl is bnt o blunt. 3. Th ndl clamp sc is loos. 4. Th ndl thad tnsion is too tight. 5. Th fabic is not dan to th a hn th sing has finishd. 6. Th ndl is too fin fo th fabic bing sn. Pag 8 Pag 22 Chang th bobbin Pag 6 Pag 6 Pag 6 Pag 10 Pag 13 Pag 6 Skippd stitchs 1. Th ndl is incoctly instd. 2. Th ndl is bnt o blunt. 3. Th ndl and/o thads a not suitabl fo th ok bing sn. 4. A blu tippd ndl is not bing usd fo sing sttch, vy fin fabics and synthtics. 5. Th ndl thad is not thadd poply. 6. Th ong ndl is bing usd. Pag 6 Pag 6 Pag 6 Pag 6 Pag 9 Chang th ndl Sam pucking Th cloth is not fding smoothly. 1. Th ndl thad tnsion is too tight. 2. Th ndl thad is not thadd poply. 3. Th ndl is too havy fo th fabic bing sn. 4. Th stitch lngth is too long fo th fabic. 1. Th fd dog is packd ith lint. 2. Th stitchs a too fin. Pag 10 Pag 9 Pag 6 Mak stitch dns Pag 22 Mak stitch coas Th machin dosn t ok. Noisy opation 1. Th machin is not pluggd in. 2. A thad is caught in th shuttl ac. 3. Th clutch is disngagd. 1. Th is thad caught in th shuttl ac. 2. Lint has built up in th shuttl o th shuttl ac. Pag 4 Pag 22 Pag 8 Pag 22 Pag 22 24

27

28 (EN)