IMPORTANT SAFETY INSTRUCTIONS

Transcription

1 Instuction Book

2

3 IMPORTANT SAFETY INSTRUCTIONS Whn using an lctical applianc, basic safty pcautions should alays b follod, including th folloing: This sing machin is dsignd and manufactud fo houshold us only. Rad all instuctions bfo using this sing machin. DANGER To duc th isk of lctic shock: 1. An applianc should nv b lft unattndd hn pluggd in. Alays unplug this sing machin fom th lctic outlt immdiatly aft using and bfo claning. WARNING To duc th isk of buns, fi, lctic shock, o injuy to psons: 1. Do not allo to b usd as a toy. Clos attntion is ncssay hn this sing machin is usd by o na childn. 2. Us this applianc only fo its intndd us as dscibd in this on s manual. Us only attachmnts commndd by th manufactu as containd in this on s manual. 3. Nv opat this sing machin if it has a damagd cod o plug, if it is not oking poply, if it has bn doppd o damagd, o doppd into at. Rtun this sing machin to th nast authoizd dal o svic cnt fo xamination, pai, lctical o mchanical adjustmnt. 4. Nv opat th applianc ith any ai opning blockd. Kp vntilation opnings of this sing machin and foot contoll f fom accumulation of lint, dust and loos cloth. 5. Nv dop o inst any objct into any opning. 6. Do not us outdoos. 7. Do not opat h aosol (spay) poducts a bing usd o h oxygn is bing administd. 8. To disconnct, tun all contols to th off ( O ) position, thn mov plug fom outlt. 9. Do not unplug by pulling on cod. To unplug, gasp th plug, not th cod. 10. Kp fings aay fom all moving pats. Spcial ca is uid aound th sing machin ndl and/o cutting blad. 11. Alays us th pop ndl plat. Th ong plat can caus th ndl to bak. 12. Do not us bnt ndls. 13. Do not pull o push fabic hil stitching. It may dflct th ndl causing it to bak. 14. Sitch this sing machin off ( O ) hn making any adjustmnt in th ndl aa, such as thading th ndl, changing th ndl, thading th bobbin o changing th pss foot, and th lik. 15. Alays unplug this sing machin fom th lctical outlt hn moving covs, lubicating, o hn making any oth adjustmnts mntiond in this on s manual. SAVE THESE INSTRUCTIONS Fo Euop only: This applianc can b usd by childn agd fom 8 yas and abov and psons ith ducd physical, snsoy o mntal capabilitis o lack of xpinc and knoldg if thy hav bn givn supvision o instuction concning us of th applianc in a saf ay and undstand th hazads involvd. Childn shall not play ith th applianc. Claning and us maintnanc shall not b mad by childn ithout supvision. Fo outsid Euop (xcpt U.S.A and Canada): This applianc is not intndd fo us by psons (including childn) ith ducd physical, snsoy o mntal capabilitis, o lack of xpinc and knoldg, unlss thy hav bn givn supvision o instuction concning us of th applianc by a pson sponsibl fo thi safty. Childn should b supvisd to nsu that thy do not play ith th applianc. Plas not that on disposal, this poduct must b safly cycld in accodanc ith lvant National lgislation lating to lctical/lctonic poducts. If in doubt plas contact you tail fo guidanc. (Euopan Union only) 1

4 ESSENTIAL PARTS Nams of Pats... 3 Standad Accssois... 4 Accssoy Stoag... 5 Extnsion Tabl... 5 F-am sing... 5 GETTING READY TO SEW Conncting th Po Supply... 6 Opating Instuctions:... 6 Machin Opating Buttons... 7 Contolling Sing Spd... 8 Foot Contol... 8 Function Kys... 9 Raising and Loing th Pss Foot Adjusting th Foot Pssu Dopping th Fd Dog Balancing Thad Tnsion...11 Changing th Pss Foot Rmoving and Attaching th Foot Hold Changing Ndls Fabic and Ndl Chat Winding th Bobbin Thading th Machin Built-in Ndl Thad Daing up th Bobbin Thad Slcting th Pattns Customizing Machin Sttings BASIC SEWING Staight Stitch Scuing Sams Sing fom th Edg of Thick Fabic Changing Sing Diction Cutting Thads Ndl Plat Guids Coning Guid Adjusting th Ndl Dop Position Adjusting th Stitch Lngth Lock-a-Matic Stitch Locking Stitch Staight Stitch ith Lft Ndl Position Tipl Sttch Stitch Knit Stitch Zipp Sing Gathing Pintucking Zigzag Stitch Multipl Zigzag Stitch (Ticot stitch) Ovdg Stitch Knit Stitch Doubl Ovdg Stitch Visibl hmming Blind Hmming Shll Tuck Button Sing Buttonhols Sua Buttonhol Round End and Fin Fabic Buttonhols Kyhol Buttonhol Sttch Buttonhols Codd Buttonhol TABLE OF CONTENTS Wltd Buttonhol Daning Tacking Eylt DECORATIVE STITCHING Appliu Finging Dan Wok Smocking Fagoting Scallop Fnch Knots Patchok Picing Patchok Stippling Clasp Stitch Satin Stitchs Tin Ndl Sing PROGRAMMING A PATTERN COMBINATION Pattn Combination Pogamming Auto-lock Stitch Pogamming Automatic Thad Cutting Pattn Combination ith a Mio Imag Rsuming a Pattn fom th Bginning Rsuming a Pattn Combination fom th Bginning Bidg Stitchs Monogamming Editing a Pattn Combination Dlting and Insting a Pattn Duplicating a Pattn Unifom Stitch Adjustmnt Unifid Ndl Dop Position Individual Stitch Adjustmnt Cocting Distotd Stitch Pattns CARE AND MAINTENANCE Claning th Hook Aa Claning th Insid of th Thad Guid Poblms and Waning Signals Toublshooting

5 !3!4 #4 #3 #2 #1 t y u!2!1!0 @4 ESSENTIAL PARTS Nams of Pats t y u #0 #1 #2 #3 #4 #5 #6 #7 #8 #9 $0 $1 Thad tak-up lv Foot pssu dial Rfnc chat Top cov Foot stoag compatmnt Bobbin thad cutt B Bobbin ind spindl Bobbin thad cutt A Hol fo xta spool pin Spool pin Spool hold (lag) Thad tnsion dial Fac cov Thad cutt Extnsion tabl (accssoy stoag) Stat/stop button Rvs button Auto-lock button Ndl up/don button Thad cutt button Fd balancing dial Spd contol slid Touch panl (Function kys) LCD scn Ndl clamp sc Ndl Zigzag foot A Ndl plat Hook cov las button Hook cov plat Foot hold Stsc Ndl thad Buttonhol lv Caying handl Handhl Dop fd lv Machin sockt Foot contol jack Po sitch Pss foot lift #5 #6 $1 #7 #8 #9 $0 To cay th sing machin, hold th caying handl ith you hand, and suppot th sing machin ith th oth hand. Sing machin dsign and spcifications a subjct to chang ithout pio notic. 3

6 t y u i o!0!1!2!3 Standad Accssois t y u Zigzag foot A (st on th machin) Zipp foot E Satin stitch foot F Blind hmming foot G Ovdg foot C 1/4 sam foot O Automatic buttonhol foot R (in th accssoy stoag) Bobbin (4 pcs.) (1 st on th machin) Spool hold (lag, 1 st on th machin) Spool hold (small) Spool hold (spcial) Exta spool pin Ndl st Scdiv Lint bush Sam ipp (Buttonhol opn) Po cabl Foot contol Smi-had fabic cov Instuctional vido DVD 4

7 Accssoy Stoag Th accssois can b convnintly stod in th compatmnt of th xtnsion tabl and th compatmnt und th top cov. To sto th accssois in th compatmnt of th xtnsion tabl, push up th cov toads you to opn th accssoy stoag. Pss foot Automatic buttonhol foot R Bobbin Exta spool pin Oth accssois can b also stod in th compatmnt in th xtnsion tabl. Extnsion Tabl Th xtnsion tabl povids an xtndd sing aa and can b movd fo f-am sing. Extnsion tabl F-am To dtach: Da th tabl out to th lft. To attach: Slid th tabl on th bas and push th tabl to th ight. F-am sing F-am sing is usd fo stitching slvs, aistbands, pant lgs o any oth tubula gamnts. It is also usful fo daning socks o mnding kns o lbos. F-am 5

8 z c GETTING READY TO SEW Conncting th Po Supply z Fist mak su th po sitch is off. x Inst th machin plug of th po supply cod into th machin sockt. c Inst th po supply plug into th all outlt t, and tun th po sitch on. Po sitch Machin plug Machin sockt Po supply plug t Wall outlt t Mak su to us th po supply cabl that cam ith th machin. If you tun off th po sitch, ait fo 5 sconds bfo tuning it on again. WARNING: Whil in opation, alays kp you ys on th sing aa, and do not touch any moving pats such as th thad tak-up lv, handhl o ndl. Alays tun off th po sitch and unplug th machin fom th po supply: - hn laving th machin unattndd. - hn attaching o moving pats. - hn claning th machin. Do not plac anything on th foot contol. t z v y u If you ish to us th foot contol, inst th pin conncto into th jack on th machin. z Fist mak su th po sitch is off. x Inst th pin conncto into th jack on th machin. c Inst th machin plug of th po supply cod into th machin sockt t. v Inst th po supply plug y into th all outlt u, and tun th po sitch on. Th foot contol sign i ill b displayd hn th foot contol is connctd to th machin. Po sitch Pin conncto Jack Machin plug t Machin sockt y Po supply plug u Wall outlt i Foot contol sign Th stat/stop button dos not ok hn th foot contol is connctd. i Opating Instuctions: Th symbol O on a sitch indicats th off position of th sitch. Fo th U.S.A. and Canada only Polaizd plug (on blad id than th oth): To duc th isk of lctic shock, this plug is intndd to fit in a polaizd outlt only on ay. If it dos not fit fully in th outlt, vs th plug. If it still dos not fit, contact a ualifid lctician to install th pop outlt. Do not modify th plug in any ay. 6

9 t Machin Opating Buttons Stat/stop button Pss this button to stat o stop th machin. Th machin stats unning sloly fo th fist f stitchs, it thn uns at th spd st by th spd contol slid. Th machin uns sloly as long as this button is pssd. Pssing and holding this button hil sing ill slo don th sing spd and th machin ill stop hn th button is lasd. Th stat/stop button cannot b usd hn th foot contol is connctd to th machin. Th machin ill not un and th pss foot mak y ill blink if you stat th pss foot in th up position. Lo th pss foot and pss th stat/ stop button. You can slct th dsid stat-up spd fom slo, mdium o high (f to pag 22). y Rvs button Whn sing stitch pattn 01, 04, 05, (mod 1) o (mod 2), th machin ill s in vs as long as th vs button is pssd. If stitch pattn 01, 04, 05, (mod 1) o (mod 2) has bn slctd and th foot contol is not connctd, th machin ill stat sing in vs as long as th vs button is pssd. If you pss th vs button hn sing any oth pattns, th machin ill immdiatly s locking stitchs and automatically stop. Auto-lock button Whn sing stitch pattn 01, 04, 05, (mod 1) o (mod 2), th machin ill immdiatly s locking stitchs and automatically stop hn th autolock button is pssd. Whn sing all oth pattns, th machin ill s to th nd of th cunt pattn, s locking stitchs and stop automatically. Th machin ill tim th thads automatically aft locking th stitch hn th auto thad cutting is tund on (f to pag 62). Ndl up/don button Pss this button to bing th ndl ba up o don. Th machin ill stop ith th ndl in don position. Hov, you can chang th ndl stop position in th machin stting mod (f to pag 22). t Thad cutt button Aft finish sing, pss this button to tim th thads. Th ndl ba automatically iss aft timming th thads (f to pag 25). t Us th thad cutt on th fac cov if th thad is #30 o thick (f to pag 25). 7

10 Contolling Sing Spd Spd contol slid You can limit th maximum sing spd ith th spd contol slid accoding to you sing nds. To incas th sing spd, mov th slid to th ight. To dcas th sing spd, mov th slid to th lft. Foot Contol Pssing on th foot contol can vay sing spd. Th had you pss th foot contol, th fast th machin uns. Th machin uns at th maximum spd st by th spd contol slid hn th foot contol is fully dpssd. Opating Instuctions: Foot contol modl YC-485EC is fo us ith this sing machin. 8

11 t i o!0!1 y u!2!6!3!7!4!5!8!9 Function Kys LCD scn Th LCD scn shos th folloing infomation hn th machin is tund on: Stitch pattn Mod Stitch pattn numb t Rcommndd typ of pss foot y Stitch idth u Stitch lngth i Mod ky (f to pags 20, 21) Pss th mod ky to slct th mod. Whn th po is tund on, th pattn slction mod 1 is st automatically. o Auto thad cutting ky (f to pag 62) Pss this ky if you ish to cut th thads automatically aft finish sing ith a locking stitch. Whn pogamming a pattn combination, pss this ky to cut th thads automatically aft finish sing.!0 Stitch idth adjusting ky (f to pags 26, 33, 43) Pss this ky to alt th stitch idth.!1 Stitch lngth adjusting ky (f to pags 26, 33, 43) Pss this ky to alt th stitch lngth.!4 Cla ky (f to pags 22, 69) Pss th cla ky to cla th mmoizd stitch pattn. Pss and hold this ky until th buzz sounds to dlt th hol pattn combination.!5 Dict pattn slction kys (f to pag 20) You can slct th stitch pattns 01, 04, 10, and 24 in mod 1 dictly.!6 Tin ndl ky (f to pag 58) Pss this ky hn sing ith a tin ndl.!7 Mio imag ky (f to pag 63) Pss this ky to s a mio imag of th slctd pattn.!8 Statov ky (f to pag 64) Pss this ky to s a pattn combination fom th bginning.!9 Mmoy ky (f to pag 60) Pss this ky to gist pogammd pattn combinations. Up to 50 stitch pattns combination can b mmoizd.!2 Cuso ky (f to pag 68) Pss o to mov th cuso to chck o dit th pattn combination.!3 Numb kys (f to pag 20) Ent a 2-digit pattn numb to slct th dsid stitch pattn in mods 1 to 5. 9

12 Raising and Loing th Pss Foot Th pss foot lift aiss and los th pss foot. Pss foot lift You can ais th pss foot high than th nomal up position. This hlps you to plac thick lays of fabics und th foot. Exta liftd position Do not tun th handhl o pss th up/don ndl button hn th pss foot is in th xta liftd position. Adjusting th Foot Pssu Th foot pssu can b adjustd ith th foot pssu dial locatd und th top cov. Th dial has 7 stting positions fom 1 to 7. Fo odinay sing, st 5 at th stting mak. Foot pssu dial Stting mak Rduc th pssu hn sing fin synthtics and sttch fabics. To duc th pssu, st th dial at a lo numb. Incas th pssu hn sing havy ight fabics. To incas th pssu, st th dial at a high numb. Dopping th Fd Dog Th fd dog can b lod fo sing on buttons, f motion uilting tc. Shift th dop fd lv toad you to lo th fd dog. Dop fd lv Fd dog Shift th dop fd lv aay fom you to ais th fd dog, it ill tun to th up position hn you stat th machin. 10

13 Balancing Thad Tnsion Auto-thad tnsion Fo gnal sing, st th thad tnsion dial at AUTO, hich covs a id ang of sing conditions. Thad tnsion dial Balancd thad tnsion Fo staight stitch sing, both ndl and bobbin thads ill join at th middl of th fabics. Fo zigzag stitch sing, th ndl thad ill appa slightly on th ong sid of th fabic. Wong sid of fabic Right sid of fabic Ndl thad Bobbin thad Manual thad tnsion adjustmnt You may nd to adjust tnsion manually dpnding on th sing conditions such as th typ of fabic and numb of lays. If th ndl thad is too tight, th bobbin thad appas on th ight sid of th fabic. Wong sid of fabic Right sid of fabic Ndl thad Bobbin thad Tun th thad tnsion dial to a lo numb to dcas th thad tnsion. If th ndl thad is too loos, th ndl thad loops on th undsid of th fabic. Wong sid of fabic Right sid of fabic Ndl thad Bobbin thad Tun th thad tnsion dial to a high numb to incas th thad tnsion. 11

14 Changing th Pss Foot CAUTION: Alays mak su to tun th po sitch OFF bfo placing th pss foot. Rais th ndl to its highst position and ais th pss foot lift. Pss th d button on th back of th foot hold. Th pss foot ill dop off. Rd button Pss foot t Attaching th pss foot Plac th pss foot so that th pin on th foot lis just und th goov of th foot hold. Lo th pss ba to lock th foot in plac. Each foot is makd ith an idntification ltt. Goov Pin t Idntification ltt Rmoving and Attaching th Foot Hold CAUTION: Alays mak su to tun th po sitch OFF bfo placing th pss foot. Rmoving th foot hold Rais th ndl to its highst position and ais th pss foot lift. Loosn th stsc. Rmov th foot hold. Pss ba Foot hold Stsc Attaching th foot hold Attach th foot hold to th pss ba fom th a. Tightn th thumbsc sculy ith th scdiv. 12

15 Changing Ndls CAUTION: Alays mak su to tun th po sitch OFF bfo changing th ndl. Rais th ndl by pssing th ndl up/don button and lo th pss foot. Tun th po sitch off. Loosn th ndl clamp sc and mov th ndl fom th clamp. Ndl clamp sc Inst a n ndl into th ndl clamp ith th flat sid of th ndl to th a. Whn insting th ndl into th ndl clamp, push it up against th stopp pin and tightn th ndl clamp sc fimly ith a scdiv. Flat sid Stopp pin To chck ndl staightnss, plac th flat sid of th ndl onto somthing flat (a ndl plat, glass tc.) Th gap btn th ndl and th flat sufac should b consistnt. Nv us a blunt ndl. Gap Fin Mdium Havy ight Fabic Thad Ndl Lan Gogtt Ticot Oganza Cp Shting Jsy Boadcloth Flc Dnim Td Coating Quilting Silk # Cotton # Synthtic # Silk #50 Cotton #50-80 Synthtic #50-80 Silk #30-50 Cotton #40-50 Synthtic #40-50 #9/65-11/75 Blu tip ndl #11/75-14/90 #14/90-16/100 Fabic and Ndl Chat Fo gnal sing, us ndl siz 11/75 o 14/90. A fin thad and ndl should b usd fo sing lightight fabics, so th fabic ill not b mad. Havy fabics ui a ndl lag nough to pic th fabic ithout faying th ndl thad. Alays tst th ndl siz on a small scap of th fabic that ill b usd fo actual sing. In gnal, us th sam thad fo th ndl and bobbin. Whn sing sttch fabics, vy fin fabics and synthtics, us a blu tip ndl. Th blu tip ndl ffctivly pvnts skippd stitchs. 1 x tin ndl, 1 x blu tip ndls (#11/75), 2 x #11/75 ndls and 1 x #14/90 ndl a includd in th ndl cas (Pat No ). 13

16 Winding th Bobbin Rmoving th Bobbin Slid th hook cov las button to th ight, and mov th hook cov plat. Hook cov las button Hook cov plat Lift out th bobbin fom th bobbin hold. Bobbin Us th J plastic bobbins fo hoizontal hook (makd ith J ). Using oth bobbins, such as p-ound pap bobbins, may caus stitching poblms and/ o damag to th bobbin hold. Stting th spool of thad Lift up th spool pin. Plac th spool of thad on th spool pin. Attach th lag spool hold, and pss it fimly against th spool of thad. Lag spool hold Us th small spool hold to hold nao o small spools of thad. Small spool hold t Us th spool hold (spcial) to hold th spcific siz of th spool of thads as shon. Th sizs of th spools of thad a as follos; Th hol diamt of th spool has a ang of 3/8 to 7/16 (9.5 to 10.5 mm)), and th spool lngth has a ang of 2 3/4 to 3 (70 to 75 mm). Spool hold (spcial) Hol diamt (3/8 to 7/16 ) t Spool lngth (2 3/4 to 3 ) Fimly inst th spool hold (spcial) into th hol and hold th spool as illustatd. Exta spool pin Us th xta spool pin hn you nd to ind a bobbin ithout unthading th machin hil oking on a sing pojct. Inst th xta spool pin into th hol as shon. Plac a spool of thad on th xta spool pin and fix th spool ith th spool hold. Exta spool pin Hol fo xta spool pin Lag spool hold Th xta spool pin is also usd fo tin ndl sing. 14

17 Winding th bobbin St th spd contol slid at th fastst position (f to pag 8). z x z Pull th thad fom th spool. Hold th thad ith both hands and pass th thad into th guid slot. Guid slot x Da th thad to th lft and foad aound th thad guid. Da th thad to th a and to th ight aound and und th guid plat. Fimly pull th thad to th ight hil holding it ith both hands. Thad guid Guid plat c t v c Put th bobbin on th bobbin ind spindl. Bobbin t Bobbin ind spindl v Pass th thad to th bobbin. Hold th thad ith both hands and ind it aound th bobbin clockis sval tims. b n b Inst th thad into on of th slits u of th flang plat y and pull th thad to cut. y Flang plat u Slit n Push th bobbin to th ight. Th bobbin mak appas on th LCD scn. i Bobbin mak u m, y i m Stat th machin. Stop th machin hn th bobbin is fully ound and stops spinning. Rtun th bobbin ind spindl to its oiginal position., Rmov th bobbin. Cut th thad ith bobbin thad cutt B o. o Bobbin thad cutt B o Fo safty puposs, th machin ill automatically stop 1.5 minuts aft stating bobbin inding. 15

18 Insting th bobbin z z Tun th po sitch off. Plac a bobbin in th bobbin hold ith th thad unning off countclockis as shon on th hook cov plat. End of thad Bobbin hold Hook cov plat x x Hold th bobbin ith you fingtip so it dos not otat. Guid th thad into th font notch of th bobbin hold. Pull th thad to th lft to pass it und th guid. Font notch t Guid t c y c Da th thad to th lft to pass it into th guid path makd 1. Mak su that th thad coms out fom th sid notch of th bobbin hold. y Guid path 1 u Sid notch u Coct Wong If th thad dos not com out fom th sid notch, thad fom stp z. u u v i o v Continu to da th thad along th guid path makd 2 and pull th thad to th ight though th slit. Th thad ill b cut to a pop lngth and hld in plac. i Guid path 2 o Slit (Thad cutt) b b St th lft dg of th hook cov plat into opning. Push don th hook cov plat to fit in plac. Unlss othis notd, you can stat sing ithout daing up th bobbin thad. Rf to pag 19 fo ho to da up th bobbin thad. 16

19 v x z Thading th Machin Rais th pss foot lift to ais th pss foot. Tun th po sitch on. Pss th ndl up/don button to ais th tak-up lv to th highst position. Tun th po sitch off. Pass th thad in th od fom z to m. b c CAUTION: Alays mak su to tun th po sitch OFF bfo thading th machin. n m z z Hold th thad ith both hands and pass th thad into th guid slot. Guid slot x x Hold th thad ith both hands and da th thad aound th con of th guid. Fimly pull th thad toad you along th ight channl until th thad snaps. Con of th guid Right channl c t v y c Da th thad don along th ight channl and aound th bottom of th thad guid plat. Pull th thad up along th lft channl. Right channl Thad guid plat t Lft channl v Whil holding th thad at th spool, fimly da th thad up and to th back of th tak-up lv. Da th thad foad to slip it into th y of th tak-up lv. y Ey of th tak-up lv b n m u b Thn pull th thad don along th lft channl and though th lo thad guid. u Lo thad guid i n Slid th thad bhind th ndl ba thad guid on th lft. i Ndl ba thad guid m Thad th ndl ith th ndl thad (f to th nxt pag). 17

20 z Built-in Ndl Thad Th ndl thad can b usd ith a #11 to #16 ndl. Thad siz 50 to 90 is commndd. Th ndl thad cannot b usd ith th tin ndl. CAUTION: Alays mak su to tun th po sitch OFF bfo using th built-in ndl thad. z Tun th po sitch ON. Pss th ndl up/don button to ais th ndl. Tun th po sitch OFF. Pull don th ndl thad knob as fa as it ill go. Th thad hook coms out though th ndl y fom bhind. Ndl up/don button Thad knob Thad hook x x Da th thad fom lft to ight, und th lft guid, thad hook and ight guid. Da th thad aound th ight guid toad you. Lft guid t Right guid t c c Rais th thad sloly so a loop of th thad is pulld up though th ndl y. y Thad loop y v v Rmov th thad nd though th ndl y to th a. Th ndl thad cannot b usd ith th tin ndl. 18

21 z Daing up th Bobbin Thad Aft using auto thad cutting o thading th bobbin hold, you can stat sing ithout daing up th bobbin thad. Hov, you nd to da up th bobbin thad hn sing gathing stitchs tc. z Rmov th bobbin. Inst th bobbin into th bobbin hold again and thad th bobbin hold accoding to th instuctions on pag 16, but lav a 10 cm (4 ) tail of bobbin thad as shon. Bobbin thad Do not cut th bobbin thad ith th thad cutt. Thad cutt x x Rais th pss foot. Hold th ndl thad lightly ith you lft hand. Ndl thad c c Pss th ndl up/don button tic to lo and ais th ndl and pick up th bobbin thad. Ndl up/don button v v Pull both thads 10 cm (4 ) und and bhind th pss foot. 19

22 Slcting th Pattns Mod 1 5 To slct stitch pattns in mods 1 5, fist pss th mod ky to slct you dsid mod. Each tim you pss th mod ky, th mod numb indicatd on th lft sid of th scn ill chang, and th mod changs as follos, Mod 1: Utility stitch pattn slction Mod 2: Dcoativ stitch pattn slction Mod 3: Numb and ltt slction Mod 4: Euopan accntd ltt slction Mod 5: Cyillic ltt slction z Exampl: To slct stitch pattn 67 in mod 2 z Tun th po sitch on. Whn th po sitch is tund on, th utility and dcoativ stitch pattn slction (mod 1) is st automatically. Pss th mod ky onc to slct mod 2. x x Pss th numb kys on th touch panl. Fist pss ky 6 and thn pss ky 7. c c No pattn 67 in mod 2 is slctd. Dict pattn slction You can slct th stitch pattns 01, 04, 10 and 24 dictly by pssing th cosponding dict pattn slction kys. 20

23 Customizing Machin Sttings You can customiz th machin sttings to you pfnc. To nt th stting mod, tun th po off. Pss and hold th mmoy ky and tun th po sitch on until th stting mod scn appas. Pss th mod ky to slct th dsid stting. Each tim you pss th mod ky, th mod numb changs, and you can st th machin functions as follos: Buzz sound stting t Ndl stop position stting y Stat up spd stting u Rstting all to dfault i Ky position calibation To xit th stting mod, pss th mmoy ky. t y u i Buzz sound stting Th buzz sound can b tund on o off. Th dfault buzz sound stting is ON. Ent th machin stting mod. To tun off th buzz sound, pss th cuso ky and th of mak ill blink. To tun on th buzz sound, pss th cuso ky and th on mak ill blink. Pss th mmoy ky to apply th stting. Caution buzz sound cannot b tund off. 21

24 Ndl stop position stting Th machin alays stops ith th ndl in th don position xcpt hn sing buttonhols, spcialty stitchs such as daning o ylt, monogams, tc. Hov you can slct th ndl stop position up o don. Ent th machin stting mod. Pss th mod ky to nt th ndl stop position stting. Th dfault ndl stop position stting is don position dn. To chang th ndl stop position, pss th cuso ky and th UP mak ill blink. Pss th mmoy ky to apply th stting. Stat-up spd stting Th machin ill stat unning sloly and th sing spd ill gadually incas to maximum hn pssing th stat/stop button. You can slct th dsid stat-up spd fom 1 (slo), 2 (mdium) o 3 (high). Ent th machin stting mod. Pss th mod ky tic to nt th stat-up spd stting. Th dfault stat-up spd stting is 2 (mdium). To chang th stat-up spd, pss th cuso ky o, and th slctd spd numb ill blink. Pss th mmoy ky to apply th stting. Rstting all to dfault Th folloing customizd sttings can b st to th dfault sttings (factoy sttings). Buzz sound Ndl stop position Stat up spd stting Ent th machin stting mod. Pss th mod ky 3 tims to nt th Rstting all to dfault mod. Pss and hold th cla ky until th machin bps to st th machin to th factoy dfault stting. Pss th mmoy ky to apply th stting. 22

25 z x Ky position calibation If th function kys sm out of alignmnt, calibat th ky position as follos. z Ent th machin stting mod. Pss th mod ky 4 tims to nt th ky position calibation. x Pss th stat/stop button. y(t4) t(t3) (t2) (t1) c c Th ky position adjustmnt scn appas and t1 is shon on th ight sid of th scn. With th buttonhol opn, pss on th touch panl of you machin. v v t2 ill b shon on th LCD scn. Pss on th touch panl. b b t3 ill b shon on th LCD scn. Pss t on th touch panl. n n t4 ill b shon on th LCD scn. Pss y on th touch panl. m m Th scn ill b back to th ky position adjustmnt scn. Pss th mmoy ky to apply th stting. 23

26 BASIC SEWING Staight Stitch Machin sttings Pattn: MODE 1: 01 Thad tnsion: AUTO Pss foot: Zigzag foot A Foot pssu: 5 Stating to s Rais th pss foot and position th fabic dg nxt to a sam guid on th ndl plat. Lo th ndl at th point h you ish to stat. Pull th ndl thad toad th a. Lo th pss foot. Pull th ndl thad to th lft hn using satin stitch foot F o automatic buttonhol foot R. Dpss th foot contol o pss th stat/stop button to stat sing. Gntly guid th fabic along th sam guid ltting th fabic fd natually. Scuing Sams Fo fastning th nds of sams, pss th vs button and s sval vs stitchs. Th machin ss in vs as long as you pss and hold th vs button. Rvs button Pss th vs button onc hn sing th lock-a-matic stitch (pattn 02) o locking stitch (pattn 03) and th machin ill lock th stitchs off and stop automatically. Sing fom th Edg of Thick Fabic Th black button on th zigzag foot locks th foot in th hoizontal position. This is hlpful hn you stat sing fom xtm dg of thick fabics o sing acoss a hm. Lo th ndl into th fabic at th point h you ish to stat sing. Lo th foot hil pushing th black button in. Th foot is lockd in th hoizontal position to avoid slipping. Thick fabics Black button Changing Sing Diction Stop th machin. Rais th pss foot. Pivot th fabic aound th ndl to chang th sing diction as dsid. Lo th pss foot and stat sing in a n diction. 24

27 Cutting Thads To cut th thads aft finishing sing, pss th thad cutt button. Th ndl ba ill automatically go up aft timming th thads. Thad cutt button Th thad cutt button dos not function hn th pss foot is up. Us th thad cutt on th fac cov to cut spcializd o thick thads if th auto thad cutt dos not ok ll. To us th thad cutt on th fac cov, mov th fabic and da it to th back. Pull th thads up and slip thm btn th thad cutt and fac cov fom bhind. Pull th thads toad you to cut. Thad cutt Ndl Plat Guids Th sam guids a makd on th ndl plat, f am and hook cov. Th sam guids fo 1/4, 3/8 and 5/8 a also makd on th font of th ndl plat. Sam guids on th font of th ndl plat Th numbs on th ndl plat indicat th distanc fom th cnt ndl position in millimts and inchs. Cnt ndl position Th coning guids a vy usful hn tuning a sua con. Coning guid Th angl scals on th ndl plat a usful fo patchok picing (f to pag 56). Angl scals 5/8 Coning Guid To maintain a 5/8 sam alloanc aft tuning a sua con, us th coning guid on th ndl plat. Stop sing hn th font dg of fabic achs th coning guid lins. Rais th pss foot and tun th fabic 90 dgs. Lo th pss foot, and bgin stitching in th n diction. Coning guid Fabic dg 25

28 Adjusting th Ndl Dop Position Th ndl dop position of th staight stitchs can b altd by pssing th stitch idth adjusting ky. Th ndl dop position can b adjustd fo folloing staight stitch pattns: Mod 1: Mod 2: Pss th sign on th stitch idth adjusting ky to mov th ndl ba to th ight. Pss th sign on th stitch idth adjusting ky to mov th ndl ba to th lft. Adjusting th Stitch Lngth Th stitch lngth can b altd by pssing th stitch lngth adjusting ky. Th stitch lngth indication ill chang as th ky is pssd. Pss th lngth. Pss th lngth. sign on th ky to incas th stitch sign on th ky to dcas th stitch

29 Lock-a-Matic Stitch Machin sttings Pattn: Thad tnsion: Pss foot: Foot pssu: MODE 1: 02 AUTO Zigzag foot A 5 Us this stitch to scu th bginning and th nd of a sam ith backstitching. Whn you ach th nd of th sam, pss th vs button onc. Th machin ill s fou vs stitchs, fou foad stitchs, and thn stop sing automatically. Rvs button Locking Stitch Machin sttings Pattn: Thad tnsion: Pss foot: Foot pssu: This uniu stitch is usd h an invisibl locking stitch is ndd. Lo th ndl clos to th font dg of th fabic. Th machin ill s sval locking stitchs in plac and continu sing foad. Whn you pss th vs button at th nd of th sam, th machin ill s sval locking stitchs in plac, thn stop sing automatically. Rvs button MODE 1: 03 AUTO Zigzag foot A 5 Staight Stitch ith Lft Ndl Position Machin sttings Pattn: Thad tnsion: Pss foot: Foot pssu: MODE 1: 04 AUTO Zigzag foot A 5 Us this stitch to sam th dg of fabics. 27

30 Tipl Sttch Stitch Machin sttings Pattn: MODE 1: 08 Thad tnsion: AUTO Pss foot: Zigzag foot A Foot pssu: 5 This stong, duabl stitch is commndd fo aas h both lasticity and stngth a ndd to nsu comfot and duability. Us it to infoc aas such as cotch and amhol sams. Also us it hn constucting itms such as backpacks fo xta stngth. Knit Stitch Machin sttings Pattn: MODE 1: 09 Thad tnsion: AUTO Pss foot: Zigzag foot A Foot pssu: 4 This is a nao sttch stitch in th lft ndl position dsignd to liminat pucking on knit fabics and bias sams, hil pmitting th sam to b pssd compltly opn flat. Us this stitch hn saming thin fabics such as ticot and fin jsy. 28

31 Zipp Sing Machin sttings Pattn: MODE 1: 01 Thad tnsion: Pss foot: Foot pssu: 5 AUTO Zipp foot E Zigzag foot A (A) (B) Attaching th zipp foot Fit th pin on zipp foot E to th goov on th foot hold. Goov Pin (A): To s th lft sid of th zipp, attach th zipp foot ith th pin on th ight-hand sid. (B): To s th ight sid of th zipp, attach th zipp foot ith th pin on th lft-hand sid. t Fabic ppaation Add 1 cm (3/8 ) to th zipp siz. This is th ovall opning siz. Right sids of th fabic 1 cm (3/8 ) Opning siz Zipp siz t End of th zipp opning t u o i Plac th ight sids of th fabic togth and s to th nd of th opning ith a 2 cm (5/8 ) sam alloanc. Rvs stitch to lock th sams. Manually incas th stitch lngth to 5.0 and bast th zipp opning ith th thad tnsion loosnd to 1-3. t End of th zipp opning y 2 cm (5/8 ) sam alloanc u Basting i Rvs stitchs o Sam stitchs y 29

32 z Sing z Fold back th lft sam alloanc. Tun th ight sam alloanc und to fom a 0.2 to 0.3 cm (1/8 ) magin. Plac th zipp tth nxt to th fold and pin in plac. St th stitch lngth and thad tnsion back to th oiginal stting. 0.2 to 0.3 cm (1/8 ) magin Zipp tth Fold End of th zipp opning t Opning siz t x x Attach th zipp foot E ith th pin on th ight hand sid. Lo th foot onto th topsid at th nd of th zipp opning so that th ndl pics th fabic nxt to th fold and th zipp tap. S along th zipp guiding th zipp tth along th sid dg of th foot. CAUTION: B su that th ndl dos not stik th pss foot o zipp tth hn th zipp foot is attachd. c y u c S though all lays nxt to th fold. Stop 5 cm (2 ) bfo zipp foot E achs th slid on th zipp tap. Lo th ndl slightly into th fabic. Rais th foot and opn th zipp to cla th slid. Lo th foot and stitch th maind of th sam. y Slid u 5 cm (2 ) 30

33 v i v Clos th zipp and spad th fabic opn flat ith th ight sid facing up. Attach th Zigzag foot A. Adjust th stitch lngth to 5.0, stitch idth to 3.5 (dfault valu) and th thad tnsion dial to 1. Bast th opnd fabic and zipp tap togth. i Basting o Zipp tap o b!0 b Attach th zipp foot E ith th lft pin. Adjust th stitch lngth and th stitch idth to dfault valu, and thad tnsion dial to AUTO. Backstitch acoss th nd of th opning cm (3/8 ) and tun th fabic 90 dgs.! cm (3/8 ) CAUTION: B su that th ndl dos not stik th pss foot o zipp tth hn th zipp foot is attachd. n n Stitch though th gamnt and zipp tap, guiding th zipp tth along th sid dg of th foot. Stop about 5 cm (2 ) fom th top of th zipp. Unfastn th basting stitchs. Lo th ndl into th fabic, ais th foot, and opn th zipp.!1 5 cm (2 )!2 Basting stitchs!1!2 m m Lo th foot and stitch th maind of th sam, making su th fold is vn. Rmov th basting thads aft saming. 31

34 Gathing Machin sttings Pattn: MODE 1: 01 Thad tnsion: 1 Pss foot: Zigzag foot A Foot pssu: cm Loosn th thad tnsion to 1 and incas th stitch lngth to 5.0. Pull up th bobbin thad and da a 10 cm (4 ) thad tail to th back bfo stating to s. Us th thad cutt on th fac cov. S to os of staight stitchs 0.6 cm (1/4 ) apat. Knot th thads at th bginning. Pull th bobbin thads at th nd to gath th fabic. Knot th thads at th nd and distibut th gaths vnly. Pintucking Machin sttings Pattn: MODE 1: 04 Thad tnsion: AUTO Pss foot: Blind hm foot G Foot pssu: 5 Fold th fabic ith th ong sids togth. Plac th foldd fabic und th blind hm foot. Align th dg of th fold ith th guid on th foot, and lo th foot. S hil guiding th dg of th fold along th guid. Opn th fabic and pss th tuck to on sid. 32

35 Zigzag Stitch Machin sttings Pattn: Thad tnsion: Pss foot: Foot pssu: MODE 1: 10, 11 AUTO Zigzag foot A 5 Zigzag stitch is usd fo vaious sing nds including ovcasting. It can b usd on most ovn fabics. A dns zigzag stitch can also b usd fo appliu. Adjusting th stitch lngth Th stitch lngth of th zigzag stitchs can b altd by pssing th stitch lngth adjusting ky. Pss th sign on th stitch lngth adjusting ky to incas th stitch lngth. Pss th sign on th stitch lngth adjusting ky to dcas th stitch lngth. Stitch lngth Adjusting th stitch idth Th stitch idth of th zigzag stitchs can b altd by pssing th stitch idth adjusting ky. Pss th sign on th stitch idth adjusting ky to incas th stitch idth. Pss th sign on th stitch idth adjusting ky to dcas th stitch idth. Stitch idth (A) (B) (A): Th pattn numb 10 (mod 1) has a fixd cnt ndl dop position. Th stitch idth changs symmtically. (B): Th pattn numb 11 (mod 1) has a fixd ight ndl dop position. Whn you chang th stitch idth, th lft ndl dop position ill chang. Fixd ight ndl position 33

36 Multipl Zigzag Stitch (Ticot stitch) Machin sttings Pattn: MODE 1: 12 Thad tnsion: AUTO Pss foot: Zigzag foot A Foot pssu: 5 This stitch is usd to finish a a dg of synthtics and oth sttch fabics that tnd to puck. S along th fabic dg laving an aduat sam alloanc. Aft sing, tim th sam alloanc clos to th stitchs. Ovdg Stitch Machin sttings Pattn: MODE 1: 13 Thad tnsion: AUTO Pss foot: Ovdg foot C Foot pssu: 5 This stitch can b usd to simultanously sam and ovcast dgs of fabics. Us this stitch hn you do not nd to opn sams flat. Plac th fabic dg nxt to th guid of th foot and thn s. CAUTION: Stitch idth should b st btn 5.0 and 7.0. Th blu tippd ndl is commndd fo sttch matials. 34

37 Knit Stitch Machin sttings Pattn: MODE 1: 14 Thad tnsion: AUTO Pss foot: Zigzag foot A Foot pssu: 4 Plac you fabic to allo a 5/8 (1.5 cm) sam. Tim xcss clos to th stitching. B caful not to cut th stitchs. Doubl Ovdg Stitch Machin sttings Pattn: MODE 1: 15 Thad tnsion: AUTO Pss foot: Ovdg foot C Foot pssu: 5 This is an xcllnt stitch fo fabics that tnd to fay xtnsivly such as linns and gabadins. To os of zigzag stitchs a simultanously sn ov th dg to insu that fabic ill not avl. CAUTION: Stitch idth should b st btn 5.0 and 7.0. Th blu tippd ndl is commndd fo sttch matials. 35

38 Visibl hmming Machin sttings Pattn: MODE 1: 17 Thad tnsion: AUTO Pss foot: Zigzag foot A Foot pssu: 5 Fold and pss a singl hm. Plac th fabic ith th ight sid up. S along th fold at th dsid dpth. Tim an xcssiv. Blind Hmming Machin sttings Pattn: MODE 1: 18, 19 Thad tnsion: AUTO Pss foot: Blind hmming foot G Foot pssu: 5 t t Slct pattn 18 fo ovn fabics o pattn 19 fo lastic fabics. Folding th fabic Fold th fabic to mak a hm as shon. Havy fabic Fin to mdium fabic cm (3/16 1/4 ) Ovcasting t Wong sid of fabic y u Sing Position th fabic so that th fold coms to th lft sid of th guid on th foot. Lo th pss foot. Adjust th position of th ndl sing ith th stitch idth adjusting ky so that th ndl just pics th foldd dg of th fabic hn th ndl coms ov to th lft sid. i S guiding th fold along th guid. y Guid on th foot u Fold Opn th fabic ith th ight sid up. Th stitchs on th ight sid of th fabic ill b almost invisibl. i Right sid of fabic 36

39 Changing th ndl dop position Pss th stitch idth adjusting ky. Th LCD scn shos th distanc btn th lft ndl position and th guid in millimts. Pss th sign to mov th ndl to th ight. Pss th sign to mov th ndl to th lft. Lft ndl dop position Right ndl dop position Guid on foot Distanc btn th lft ndl position and th guid Th stitch idth of pattns 18 (mod 1) and 19 (mod 1) cannot b changd, but th ndl dop position ill mov. Making th staight stitchs in pattn numb 18 long Pogam a combination of pattns 18 (mod 1) and pattn 57 (mod 2). To staight stitchs ill b addd to th blind hm stitch hn combining ith pattn 57 (mod 2) (Rf to pag 65). 37

40 Shll Tuck Machin sttings Pattn: MODE 1: 20 Thad tnsion: 6 8 Pss foot: Satin stitch foot F Foot pssu: 5 Us a light ight fabic (ticot, fo xampl). Fold th fabic as shon and stitch on th fold. Allo th ndl to just cla th foldd dg to cat a shlld dg. You may nd to incas th ndl thad tnsion. Foldd dg Right ndl dop position If you s os of shll stitchs, spac th os at last 1.5 cm (5/8 ) apat. You can also s shll stitchs on knits o soft silky ovn fabics in any diction. t Button Sing Machin sttings Stitch pattn: MODE 1:10 Thad tnsion: AUTO Pss foot: Satin stitch foot F Foot pssu: 5 t Fd dog: Lod Do not us th thad cutt button to cut th thads. Othis, you cannot ti th thads. Lo th fd dog. Match th hols of button to th hoizontal slot on th pss foot. Lo th foot to hold th button in plac. Adjust th stitch idth so th ndl ill nt th lft hol of th button. Tun th handhl so that th ndl ill nt th ight hol of th button. Radjust th stitch idth if ncssay. Stitch sval tims. Aft you finish sing, cut th thads but lav 7.5 cm 10 cm (3 4 ) of thads at th nd. Pull th bobbin thads to bing th ndl thads don to th ong sid of th fabic. Ti th thads togth. * Aft th button sing is compltd, ais th fd dog fo nomal sing. 38

41 Buttonhols Vaity of buttonhols 24 Sua buttonhol This sua buttonhol is idly usd on mdium to havy ight fabics. Th buttonhol siz is automatically dtmind by placing a button in th foot. 25 Round nd buttonhol This buttonhol is usd on fin to mdium ight fabics spcially fo blouss and childn s cloths. 26 Fin fabic buttonhol This buttonhol is oundd at both nds and is usd on fin, dlicat fabics such as fin silk. 27 Kyhol buttonhol Th Kyhol buttonhol is idly usd on mdium to havy ight fabics. It is also suitabl fo lag and thick buttons Sttch buttonhols This buttonhol can b usd on sttch fabics. It can also b usd as a dcoativ buttonhol. 30 Wltd buttonhol This is a tmplat pattn fo th hand sn ltd (bound) buttonhol. Sing pocdu of pattns is th sam as pattn numb

42 Sua Buttonhol Machin sttings Pattn: MODE 1: 24 Thad tnsion: AUTO Pss foot: Automatic buttonhol foot R Foot pssu: 5 z Th siz of a buttonhol is automatically st by placing a button in th a of automatic buttonhol foot R. Th button hold of th foot taks a button siz of 1 cm (3/8 ) to 2.5 cm (1 ) in diamt. Whn slcting th buttonhols, th LCD scn advis you to lo th buttonhol lv. It is somtims ncssay to chang buttonhol siz to match ctain havy o spcific fabics and thads. Mak a tst buttonhol on an xta pic of th fabic to chck you sttings. Th pst idth of th buttonhol is suitd fo odinay buttons. Apply an intfacing to sttch o fin fabics. Sing z Pull th button hold to th back, and plac th button in it. Push it togth tightly on th button. Button hold If th button is xtmly thick, mak a tst buttonhol on an xta pic of th fabic. If it is difficult to fit th button though th tst buttonhol, you can lngthn th buttonhol by pulling th button hold back a littl. Th lngth of th buttonhol ill b incasd. Exta gap x x Pss th ndl up/don button to ais th ndl. Attach th automatic buttonhol foot R snapping th pin into th goov of th foot hold. You may lift th pss foot lift to th xta liftd position hn placing th automatic buttonhol foot und th foot hold. Rais th pss foot. Goov Pin c c Da th ndl thad to th lft though th hol of foot. Mak th buttonhol position on th fabic and plac it und th buttonhol foot. Lo th ndl at th stating point by tuning th handhl. t Stating point t 40

43 v v Lo th pss foot and pull th buttonhol lv don as fa as it ill go. u Buttonhol lv u i Mak su th is no gap btn th slid and font stopp, othis th buttonhol ill b out of position o th ill b a sing gap. i No gap o Stating point!0 Sing gap!0!0!0 o o o b b Stat sing hil pulling th ndl thad lightly to th lft. Aft sing a f stitchs, f th thad and continu sing. 41

44 n n Th buttonhol is sn automatically in th sunc shon. Whn th buttonhol is finishd, th machin ill stop automatically ith th ndl in th up position. Pss th thad cutt button and mov th fabic. If you stat sing ithout pulling don th buttonhol lv, th LCD scn ill sho a aning and th machin ill stop aft a f stitchs. Pull th buttonhol lv don and stat sing. m m Aft you finish buttonhol sing, push th buttonhol lv up as fa as it ill go.,, Plac a pin just blo th batack at ach nd to pvnt accidntally cutting th thads. Cut th opning ith th sam ipp. Us an ylt punch to opn a kyhol buttonhol. To mak a solid and study buttonhol, s anoth lay of buttonhol ov th pvious on. Aft th buttonhol is finishd, simply pss th stat/ stop button again. Do not ais th foot o slct th pattn. Th machin ill s anoth buttonhol ov th pvious on. 42

45 Manual sttings Th buttonhol idth can b adjustd by pssing th stitch idth adjusting ky. Pss th sign on th stitch idth adjusting ky to incas th buttonhol idth. Pss th sign on th stitch idth adjusting ky to dcas th buttonhol idth. Stitch idth adjusting ky Nao buttonhol Wid buttonhol Th buttonhol idth can b adjustd fom 2.5 to 7.0. Adjusting th buttonhol stitch dnsity Th buttonhol stitch dnsity can b adjustd by pssing th stitch lngth adjusting ky. Pss th sign on th stitch lngth adjusting ky to mak th buttonhol stitch lss dns. Pss th sign on th stitch lngth adjusting ky to mak th buttonhol stitch dns. Stitch lngth adjusting ky Dns buttonhol Lss dns buttonhol Th stitch dnsity can b adjustd fom 0.2 to

46 Round End and Fin Fabic Buttonhols Machin sttings Pattn: Thad tnsion: Pss foot: Foot pssu: MODE 1: 25, 26 AUTO Automatic buttonhol foot R 5 Th sing pocdu is th sam as th sua buttonhol (f to pags 40-42). Th machin ill s a buttonhol in th od shon. Stating point Th buttonhol idth can b adjustd fom 2.5 to 5.5. Th stitch dnsity can b adjustd fom 0.2 to 0.8. Kyhol Buttonhol Machin sttings Pattn: Thad tnsion: Pss foot: Foot pssu: MODE 1: 27 AUTO Automatic buttonhol foot R 5 Th sing pocdu is th sam as th sua buttonhol (f to pags 40-42). Th machin ill s a buttonhol in th od shon. Us an ylt punch to opn a kyhol buttonhol. Stating point Eylt punch Th buttonhol idth can b adjustd fom 5.5 to 7.0. Th stitch dnsity can b adjustd fom 0.3 to 0.8. Sttch Buttonhols Machin sttings Pattn: Thad tnsion: Pss foot: Foot pssu: MODE 1: AUTO Automatic buttonhol foot R 5 Th sing pocdu is th sam as th sua buttonhol (f to pags 40-42). Th machin ill s a buttonhol in th od shon. Stating point Th buttonhol idth can b adjustd fom 2.5 to 7.0. Th stitch dnsity can b adjustd fom 0.5 to 1.0 fo pattn 28 (mod 1), 0.5 to 2.5 fo pattn 29 (mod 1). If th stitch balanc of th lft and ight o is not vn, coct it by tuning th fd balancing dial (f to pag 72). 44

47 Codd Buttonhol Machin sttings Pattn: MODE 1: 24 Thad tnsion: AUTO Pss foot: Automatic buttonhol foot R Foot pssu: 5 z z Us th sam pocdu as th sua buttonhol pocdu. St th stitch idth to match th thicknss of th cod usd. With th buttonhol foot aisd, hook th fill cod on th spu at th back of th buttonhol foot. Bing th nds toad you und th buttonhol foot, claing th font nd. Hook th fill cod into th foks on th font of th automatic buttonhol foot to hold thm tight. Lo th ndl into th gamnt h th buttonhol ill stat, and lo th foot. Spu Foks x x Lo th buttonhol lv. Pull th ndl thad lightly to th lft. Stat th machin and s th buttonhol. Each sid of th buttonhol and th batacks ill b sn ov th cod. Rmov th fabic fom th machin, and cut th sing thads only. c c Pull th loos nds of th fill cod to tightn it. Thad th ach nd of th cod though a handsing ndl. Thn da th both nds to th ong sid of th fabic and knot. Cut th fill cod at both nds, if th fill cod is stitchd on th fabic and cannot b pulld. 45

48 Wltd Buttonhol Machin sttings Pattn: MODE 1: 30 Thad tnsion: AUTO Pss foot: Automatic buttonhol foot R Foot pssu: 5 z A ltd buttonhol is mad by stitching a stip o patch of fabic to th buttonhol. Wltd buttonhols a paticulaly suitabl fo tailod gamnts, but a not commndd fo sh o dlicat fabics h th patch might sho though o add bulk. x c z Bast a patch to th gamnt fabic ith th ight sids togth. Wong sid of patch Right sid of gamnt fabic x Slct pattn 30 (mod 1). S th ltd buttonhol on both fabics togth. Cut th buttonhol opning as illustatd thn pull th patch out though th slit to th oth sid. Wong sid of patch Right sid of gamnt fabic Right sid of patch v c Pull out th patch until th ight sid of th patch is shoing. Us an ion to pss both con nds until thy a suad off. Right sid of patch Wong sid of gamnt fabic v Fold back ach sid of th patch to fom buttonhol lips. Wong sid of patch Right sid of patch b b Pss both folds ith an ion. Right sid of patch Wong sid of gamnt fabic n n Bast both dgs of th sam ith a ndl and thad by hand. Right sid of gamnt fabic 46

49 m t m Fold ov th lngth of th gamnt fabic, s back and foth bsid th oiginal sam to scu flaps of th patch. Wong sid of gamnt fabic t S back and foth,, Fold ov th nd of fabic and s back and foth th tims ov th tiangula nd. Wong sid of patch Right sid of gamnt fabic Wong sid of gamnt fabic.. Th patch should b cut 1 to 1.5 cm (7/16 5/8 ) aay fom th hol. Th cons should b cut oundd off as shon. Right sid of patch Wong sid of gamnt fabic y 0 u 0 Plac th facing on th ong sid of th gamnt fabic. Mak th 4 cons ith pins as shon. y Facing u Gamnt fabic u 1 y 1 Tun all th lays ov and cut th buttonhol opning on th facing in th sam ay as stp x. Fou mak pins sho you th con points on th facing. Fold back ach flap btn th facing and patch. y Facing u Gamnt fabic u 2 y 2 Stitch aound th opning ith a ndl and thad as shon. y Facing u Gamnt fabic 3 u 3 Th ltd buttonhol is complt. u Gamnt fabic 47

50 Daning Machin sttings Pattn: MODE 1: 31 Thad tnsion: AUTO Pss foot: Automatic buttonhol foot R Foot pssu: 5 z x c z Attach th automatic buttonhol foot R and pull th button hold all th ay out. Plac th fabic und th foot, and lo th ndl at th stating point. Thn lo th foot. Button hold Stating point x Stat th machin and s to th uid lngth, thn pss th vs button. This sts th daning lngth. Continu sing until th machin stops automatically. Rvs button Ruid lngth c S anoth lay of daning ov th fist lay, at a ight angl to it. Th maximum daning lngth is 2 cm (3/4 ) and th maximum idth is 0.9 cm (3/8 ). To s th sam siz daning Simply stat th machin to s anoth daning in th sam siz. To s th nxt daning in a diffnt siz, pss th mmoy ky. To s a shot daning S th fist lin to th dsid lngth and stop th machin. Pss th vs button and stat th machin again. Th machin ill s th st of th daning and stop automatically. 48

51 To adjust th vnnss of daning stitchs You can coct unvnnss of daning stitchs by pssing th o ky of th stitch lngth adjusting ky. If th lft con is lo than th ight sid, pss th ky to coct it, and vic vsa. d1 d4 d6 d9 Th vnnss can b adjustd ithin d1 to d9 (dfault stting is d5). 49

52 Tacking Machin sttings Pattn: MODE 1: 32 Thad tnsion: AUTO Pss foot: Satin stitch foot F Foot pssu: 5 Tacking is usd to infoc pockts, cotch sams and blt cais h xta stngth is ndd. Sing Lo th ndl at th stating point. Lo th foot and s until th machin stops automatically. Th machin ill s a tacking 1.5 cm (9/16 ) long automatically. Tacking Stating point 1.5 cm (9/16 ) Sing a shot tack To s a tack shot than 1.5 cm (9/16 ), fist stop th machin aft sing th uid lngth, and thn pss th vs button. Th uid lngth has bn dtmind. Stat th machin and continu sing until th machin stops automatically. Stating point Ruid lngth Tack lngth Rvs button Sing th sam siz tack To s anoth tack at th sam siz, simply stat th machin and it ill stop automatically hn finishing sing. Sing th tack at a diffnt siz To s th nxt tack at a diffnt siz, pss th mmoy ky to mmoiz a n siz and stat sing fom th bginning. 50