IMPORTANT SAFETY INSTRUCTIONS

Transcription

1 Instuction Book

2

3 IMPORTANT SAFETY INSTRUCTIONS Whn using an lctical applianc, basic safty pcautions should alays b follod, including th folloing: This sing machin is dsignd and manufactud fo houshold us only. Rad all instuctions bfo using this sing machin. DANGER To duc th isk of lctic shock: 1. An applianc should nv b lft unattndd hn pluggd in. Alays unplug this sing machin fom th lctic outlt immdiatly aft using and bfo claning. To duc th isk of buns, fi, lctic shock, o injuy to psons: WARNING 1. Do not allo to b usd as a toy. Clos attntion is ncssay hn this sing machin is usd by o na childn. 2. Us this applianc only fo its intndd us as dscibd in this on s manual. Us only attachmnts commndd by th manufactu as containd in this on s manual. 3. Nv opat this sing machin if it has a damagd cod o plug, if it is not oking poply, if it has bn doppd o damagd, o doppd into at. Rtun this sing machin to th nast authoizd dal o svic cnt fo xamination, pai, lctical o mchanical adjustmnt. 4. Nv opat th applianc ith any ai opning blockd. Kp vntilation opnings of this sing machin and foot contoll f fom accumulation of lint, dust and loos cloth. 5. Nv dop o inst any objct into any opning. 6. Do not us outdoos. 7. Do not opat h aosol (spay) poducts a bing usd o h oxygn is bing administd. 8. To disconnct, tun all contols to th off ( O ) position, thn mov plug fom outlt. 9. Do not unplug by pulling on cod. To unplug, gasp th plug, not th cod. 10. Kp fings aay fom all moving pats. Spcial ca is uid aound th sing machin ndl and/o cutting blad. 11. Alays us th pop ndl plat. Th ong plat can caus th ndl to bak. 12. Do not us bnt ndls. 13. Do not pull o push fabic hil stitching. It may dflct th ndl causing it to bak. 14. Sitch this sing machin off ( O ) hn making any adjustmnt in th ndl aa, such as thading th ndl, changing th ndl, thading th bobbin o changing th pss foot, and th lik. 15. Alays unplug this sing machin fom th lctical outlt hn moving covs, lubicating, o hn making any oth adjustmnts mntiond in this on s manual. SAVE THESE INSTRUCTIONS Fo Euop only: This applianc can b usd by childn agd fom 8 yas and abov and psons ith ducd physical, snsoy o mntal capabilitis o lack of xpinc and knoldg if thy hav bn givn supvision o instuction concning us of th applianc in a saf ay and undstand th hazads involvd. Childn shall not play ith th applianc. Claning and us maintnanc shall not b mad by childn ithout supvision. Fo outsid Euop (xcpt U.S.A and Canada): This applianc is not intndd fo us by psons (including childn) ith ducd physical, snsoy o mntal capabilitis, o lack of xpinc and knoldg, unlss thy hav bn givn supvision o instuction concning us of th applianc by a pson sponsibl fo thi safty. Childn should b supvisd to nsu that thy do not play ith th applianc. Plas not that on disposal, this poduct must b safly cycld in accodanc ith lvant National lgislation lating to lctical/lctonic poducts. If in doubt plas contact you tail fo guidanc. (Euopan Union only) 1

4 ESSENTIAL PARTS Nams of Pats... 3 Standad Accssois... 4 Accssoy Stoag... 5 Extnsion Tabl... 5 F-am sing... 5 Foot Contol and Thad Cutt Sitch... 6 Adjusting th Thad Cutt Sitch Position Exta Wid Tabl... 8 GETTING READY TO SEW Conncting th Po Supply... 9 Opating Instuctions:... 9 Thad Cutt Sitch Contolling Sing Spd...11 Foot Contol...11 Machin Opating Buttons Touch Panl Kys Winding th Bobbin Thading th Machin...17 Built-in Ndl Thad Daing up th Bobbin Thad Rplacing Ndls Fabic and Ndl Chat Rplacing th Pss Foot Rmoving and Attaching th Foot Hold Attaching th Dual Fd Foot Attaching th Daning Foot PD-H Attaching th Pofssional gad Foot HP Rplacing th Ndl Plat Rtactabl Sing Light Dopping th Fd Dog Raising and Loing th Pss Foot Kn Lift Using th Cloth Guid ORDINARY SEWING MODE Odinay Stitch Pattns Function Kys in Odinay Sing Mod Utility Stitchs Staight Stitchs Sing fom th Edg of Thick Fabic Changing Sing Diction Tuning a Sua Con Scuing Sams Cutting Thads Ndl Plat Guids Vaity of Staight Stitchs Sing ith th Dual Fd Dvic Sing ith th Pofssional gad foot HP Zigzag Stitchs Vaity of Ovcasting Stitchs Manual Stitch Sttings Adjusting Thad Tnsion Adjusting Foot Pssu Contol Foot up fo Pivoting Favoit Stitch Adjustmnt Oth Utility Stitchs Buttonhols and Spcialty Stitchs Vaity of Buttonhols B1 Snso (Sua) Buttonhol Using th Stabiliz Plat B2 Automatic (sua) Buttonhol Oth Buttonhols B11 Wltd Buttonhol (Bound Buttonhol) Codd Buttonhol Spciality Stitchs B13 Daning B15 Fly Stitch B16-B18 Eylts TABLE OF CONTENTS 2 Dcoativ Stitchs Dcoativ Stitchs Quilting(Q) Using th Quilting Guid Ba Q1-Q3 Patchok Picing Angl Scals on th Ndl Plat Q71-Q74 Hand-look Quilt Stitchs S1-S24 Dcoativ Satin Stitchs Elongation Ratio Catd Stitchs (CS) Tin Ndl Sing PROGRAMMING A PATTERN COMBINATION Mio Imag of Pattns Bidg Stitchs Editing a Pattn Combination Dlting a Pattn Insting a Pattn Statov Ky Chcking Pattn Combination Lngth Monogamming Function Kys Manual Thad Tnsion Individual Thad Tnsion Adjustmnt Unifid Thad Tnsion Adjustmnt Spacing Rducing th Siz of Ltts Pogamming a Monogam Saving a Pattn Combination Opning a Pattn Combination...74 SEWING APPLICATION Sing Application Saming Ovdg Blind Hm Shll Tuck Rolld Hm Zipp Sing Concald Zipp Sing (optional) Gathing Basting Button Sing Tacking Appliu Patchok Quilting Staight Stitchs (ith dual fd) Clasp Stitchs F Quilting On Stitch Off Foot Hight fo F Motion Quilting Sculptu Stitchs Hand-look Quilt Stitchs Vaiabl Zigzag Maximum Zigzag Width Adjustmnt CUSTOMIZING MACHINE SETTINGS Machin Stting Mod Common Stting Mod Odinay Sing Stting Mod Languag Slction Mod Cocting Distotd Stitch Pattns CARE AND MAINTENANCE Claning th Hook Aa Poblms and Waning Signals Toublshooting Stitch Chat

5 !2!3!4!5!6 #9 #8 #7 #6 #5 $1 $0 t y #0 #1 #3 o %0 ESSENTIAL PARTS Nams of Pats t y u #0 #1 #2 #3 #4 #5 #6 #7 #8 #9 $0 $1 $2 $3 $4 $5 $6 $7 $8 $9 %0 Thad tak-up lv Rfnc chat Top cov Touch panl stylus hold Foot stoag compatmnt Bobbin thad cutt B Bobbin ind spindl Bobbin thad cutt A Hol fo xta spool pin Spool pin Spool hold (lag) Rtactabl light Fac cov Ndl thad lv Thad cutt Extnsion tabl (accssoy stoag) Ndl plat las lv Stat/stop button Rvs button Auto-lock button Ndl up/don button Pss foot lift button Thad cutt button Fd balancing dial Kn lift sockt Spd contol slid Visual touch scn Lo thad guid Ndl clamp sc Ndl Zigzag foot A Ndl plat Hook cov las button Hook cov plat Fd dog Foot hold Stsc Buttonhol lv Ndl thad Caying handl Handhl Dual fd balancing dial Thad cutt sitch jack USB pot Dop fd lv Machin sockt Foot contol jack Po sitch Dual fd div Pss foot lift $2 $9 $3 $4 $5 $6 $7 $8 To cay th sing machin, hold th caying handl ith you hand, and suppot th sing machin ith th oth hand. Sing machin dsign and spcifications a subjct to chang ithout pio notic. 3

6 !2 u!3 y!4 t @9 #0 #1 #2 #3 #4!8 #5!6 #7!7 Standad Accssois t y u #0 #1 #2 #3 #4 #5 #6 #7 #8 #9 $0 $1 $2 $3 $4 $5 $6 $7 Zigzag foot A (st on th machin) Ovdg foot M Satin stitch foot F Blind hmming foot G Zipp foot E Automatic buttonhol foot R Stabiliz plat Rolld hm foot D Opn to satin stitch foot F2 Daning foot PD-H F motion uilting closd-to foot QC F motion uilting opn-to foot QO F motion uilting zigzag foot QV Button sing foot T Button shank plat 1/4 sam foot O Pofssional gad foot HP Dual fd foot AD (tin) Staight stitch ndl plat Pofssional gad ndl plat Bobbin x 5 (1 st on th machin) Ndl st Additional spool pin Scdiv Lint bush Sam ipp (buttonhol opn) Quilting guid ba Spool hold (lag) x 2 (1 st on th machin) Spool hold x 2 (small) Spool hold x 2 (spcial) Touch panl stylus Kn lift Po cabl* Instuction book Smi-had fabic cov Instuctional vido DVD Stitch compos Foot contol Thad cutt sitch Bas plat Cabl ti Stsc X 4 Stsc X 2 Wash X 2 Rubb sol X 2 Cloth stt Exta id tabl *Th po cabl includd may diff fom th illustation. #8 #9 $1 $2 $6 $7 $0 $3 $4 $5 4

7 Accssoy Stoag Th accssois can b convnintly stod in th compatmnt of th xtnsion tabl and th compatmnt und th top cov. To sto th accssois in th compatmnt of th xtnsion tabl, push up th cov toads you to opn th accssoy stoag. Pss foot Buttonhol stabiliz plat Automatic buttonhol foot R Dual fd foot AD (tin) t Staight stitch ndl plat y Pofssional gad plat u Bobbin i Exta spool pin Oth accssois can b also stod in th compatmnt in th xtnsion tabl. t y u i Extnsion Tabl Th xtnsion tabl povids an xtndd sing aa and can b movd fo f-am sing. Extnsion tabl F-am To dtach: Da th tabl out to th lft. To attach: Slid th tabl on th bas and push th tabl to th ight. F-am sing F-am sing is usd fo stitching slvs, aistbands, pant lgs o any oth tubula gamnts. It is also usful fo daning socks o mnding kns o lbos. F-am 5

8 Foot contol and Thad Cutt Sitch To attach th foot contol and th thad cutt sitch to th bas plat, tightn stscs, and stscs t ith ashs y as shon. Foot contol Thad cutt sitch Bas plat Stsc A t Stsc B y Wash t y z Adjusting th thad cutt sitch position Placing th thad cutt sitch to th lft Th thad cutt sitch position can b adjustd fo you convninc. If you ish to attach th thad cutt sitch to th lft sid of th foot contol, follo th pocdu blo. z Rmov th stscs A, B and ashs ith a scdiv. Stsc A Stsc B Wash x x Tun th bas plat 180 dgs. c c Attach th foot contol and thad cutt sitch ith th stscs and th ashs. Tightn th stscs A and B. B su that th cabl is not caught btn th foot contol and th bas plat. 6

9 z Adjusting th hoizontal position of th thad cutt sitch z Loosn th stscs und th sitch. Stsc Wash x x Slid th sitch to lft o ight, and fix it at th dsid position by tightning th stscs ith a scdiv. z x Adjusting th vtical position of th thad cutt sitch z Rmov th stscs and ashs. x Mov th sitch to foad o backad, and attach th sitch to th dsid position and fix it ith th stscs and ashs. t y To fix th thad cutt sitch to its lost position, fix th stscs into th hol, and thn hols t. Tightn th stscs sculy. Pl off th backing pap fom th ubb sol y and attach it to th bottom of th thad cutt sitch as shon. 7

10 z x Exta Wid Tabl To attach: z Sc th adjusting scs into th lgs. x Pl off th backing pap fom th ubb sols and attach to th bottom of th lgs. Adjusting sc Lg Rubb sol c c Attach th 6 lgs to th tabl top ith th stscs. Stsc t Tabl top t v v Rmov th xtnsion tabl. b b Plac th assmbld tabl on th machin. n n Adjust th hight of th tabl top by tuning th adjusting sc. To mov: To mov th lgs fom th tabl top, you do not hav to loosn th stscs. Tun th lg clockis to mov th lg fom th tabl top. To attach th lg to th tabl top again, inst th lg into th attachmnt of th lg, thn tun th lg countclockis until it stops. 8

11 x z c GETTING READY TO SEW Conncting th Po Supply z Fist mak su th po sitch is off. x Inst th machin plug of th po supply cod into th machin sockt. c Inst th po supply plug into th all outlt t, and tun th po sitch on. Po sitch Machin plug Machin sockt Po supply plug t Wall outlt t Mak su to us th po supply cabl that cam ith th machin. If you tun off th po sitch, ait fo 5 sconds bfo tuning it on again. WARNING: Whil in opation, alays kp you ys on th sing aa, and do not touch any moving pats such as th thad tak-up lv, handhl o ndl. Alays tun off th po sitch and unplug th machin fom th po supply: - hn laving th machin unattndd. - hn attaching o moving pats. - hn claning th machin. Do not plac anything on th foot contol. x c t z v y u If you ish to us th foot contol, pull out th cod fom th foot contol and inst th pin conncto into th jack on th machin. z Fist mak su th po sitch is off. x Inst th machin plug of th po supply cabl into th machin sockt. c Da out th cod fom th foot contol and inst th pin conncto into th jack t on th machin. v Inst th po supply plug y into th all outlt u, and tun th po sitch on. Po sitch Machin plug Machin sockt Pin conncto t Jack y Po supply plug u Wall outlt Th stat/stop button dos not ok hn th foot contol is connctd. Opating Instuctions: Th symbol O on a sitch indicats th off position of th sitch. Fo th U.S.A. and Canada only Polaizd plug (on blad id than th oth): To duc th isk of lctic shock, this plug is intndd to fit in a polaizd outlt only on ay. If it dos not fit fully in th outlt, vs th plug. If it still dos not fit, contact a ualifid lctician to install th pop outlt. Do not modify th plug in any ay. 9

12 y t z b Thad Cutt Sitch If you ish to us th thad cutt sitch, inst th pin conncto into th thad cutt sitch jack on th machin. z Fist mak su th po sitch is off. x Rmov th cabl ti fom th cabl. c Inst th machin plug t of th po supply cabl into th machin sockt y. v Inst th pin conncto into th thad cutt sitch jack on th machin. b Inst th po supply plug u into th all outlt i, and tun th po sitch on. Po sitch Cabl ti Pin conncto Thad cutt sitch jack t Machin plug y Machin sockt u Po supply plug i Wall outlt i u o!0 Aft sing, dpss th thad cutt sitch o on th ight sid of th foot contol to tim th both ndl and bobbin thads. Do not dpss th thad cutt sitch until th stat/stop button tuns gn!0. o Thad cutt sitch Thads a timmd hn th thad cutt sitch is dpssd fo mo than 0.5 sconds. Th thad cutt sitch dos not ok ithout th foot contol bing dpssd fist. Bundl th cabls ith th cabl ti as ncssay.!1 Cabl ti!1 10

13 Contolling Sing Spd Spd contol slid You can limit th maximum sing spd ith th spd contol slid accoding to you sing nds. To incas th sing spd, mov th slid to th ight. To dcas th sing spd, mov th slid to th lft. Foot Contol Pssing on th foot contol can vay sing spd. Th had you pss th foot contol, th fast th machin uns. Th machin uns at th maximum spd st by th spd contol slid hn th foot contol is fully dpssd. This machin is uippd ith an automatic shutdon safty fatu to pvnt ovhating hnv th machin is unning ovloadd. Follo th safty instuctions that appa on th visual touch scn. Cod stoag Th cod of th foot contol can b convnintly stod in th cod stoag und th bas cov of th foot contol. Bas cov Cod Hooks Opating Instuctions: Foot contol modl is fo us ith this sing machin. 11

14 u Machin Opating Buttons Stat/stop button Pss this button to stat o stop th machin. Th machin stats unning sloly fo th fist f stitchs, it thn uns at th spd st by th spd contol slid. Th machin uns sloly as long as this button is pssd. Th button ill tun d hn th machin is unning, and gn hn it has bn stoppd. Pssing and holding this button hil sing ill slo don th sing spd and th machin ill stop hn th button is lasd. Th stat/stop button cannot b usd hn th foot contol is connctd to th machin. You can slct th dsid stat-up spd fom slo, mdium o high (f to pag 98). Rvs button Whn stitch pattn U1, U4, U8-U10, Q1-Q3, o BR1-BR6, is slctd; Th machin ill s in vs as long as th vs button is pssd. Rlas th button to s foad. Whn th machin is stoppd and foot contol is disconnctd, th machin ill s in vs sloly as long as th vs button is pssd. Rlas th button to stop th machin. Whn any oth stitchs a slctd; If you pss th vs button hn sing any oth pattns, th machin ill immdiatly s locking stitchs and automatically stop. Th ill b paticula functions of th vs button hn stitch pattn U2, U3, B2, B13, o B14 is slctd. Rf to pags 32, 48-49, 54 and 88 fo instuctions. t U: Q: BR: i y Auto-lock button Whn stitch pattn U1, U4, U8-U10, Q1-Q3, o BR1- BR6, is slctd; U: Q: BR: Pss th auto-lock button to s a locking stitch immdiatly. Th machin ill automatically stop. Whn th machin is stoppd, pss th auto-lock button to blink th LED signal u. Th machin ill immdiatly s locking stitchs and automatically stop hn th machin is statd. Whn any oth stitchs a slctd; Pss th auto-lock button to s a locking stitch at th nd of cunt pattn. Th machin ill automatically stop. Whn th machin is stoppd, pss th auto-lock button to blink th LED signal u. Th machin ill s a locking stitch at th nd of th cunt pattn and automatically stop hn th machin is statd. Th machin ill tim th thads automatically aft locking th stitch hn th auto thad cutting is tund on (f to pag 99). Ndl up/don button Pss this button to bing th ndl ba up o don. Th machin ill stop ith th ndl in don position. Hov, you can chang th ndl stop position in th machin stting mod (f to pag 97). t Pss foot lift button Th pss foot ill go up o go don by pssing this button. You can also us th pss foot lift and kn lift to ais and lo th pss foot (f to pag 25-26). y Thad cutt button Aft finish sing, pss this button to tim th thads. Th ndl ba automatically iss aft timming th thads (f to pag 31). Th LED signal i blinks hn th machin tims thads. Th thad cutt button dos not function: - dictly aft tuning on th po. - hn th pss foot is aisd ith th foot lift. - aft bing pssd 3 tims in a o. Us th thad cutt on th fac cov if th thad is #30 o thick (f to pag 31). 12

15 Touch Panl Kys CAUTION: Do not pss th touch panl o visual touch scn ith had o shap objcts lik pncils, scdivs o th lik. Us th touch panl stylus includd in th standad accssois. Opn fil ky (f to pag 64, 74) Pss this ky and th opn fil indo ill opn. You can opn pattn combinations and monogams savd in th machin s intnal mmoy o on a USB flash div. St mod ky (f to pag 94) Pss this ky to nt th stting mod. You can customiz th machin sttings to you pfnc. Th machin sttings fo Common Sttings, Odinay Sing and Choos Languag a availabl in this mod Lockout ky Pss this ky to lockout th machin hn thading th machin, placing th accssois tc. To duc th isk of injuy, all th buttons xcpt th lock ky and pss foot lift button a dactivatd. To unlock th machin, pss this ky again. Pag kys Pss th pag ky to display th nxt pag o pvious pag. Pss and hold th pag ky to tun th pags continuously. t t Touch ba Pss on th ba and slid to th ight o lft to display th nxt pag o pvious pag. 13

16 Winding th Bobbin Rmoving th Bobbin Slid th hook cov las button to th ight, and mov th hook cov plat. Hook cov las button Hook cov plat Lift out th bobbin fom th bobbin hold. Bobbin Us th J plastic bobbins fo hoizontal hook (makd ith J ). Using oth bobbins, such as p-ound pap bobbins, may caus stitching poblms and/ o damag to th bobbin hold. Stting th spool of thad Lift up th spool pin. Plac th spool of thad on th spool pin. Attach th lag spool hold, and pss it fimly against th spool of thad. Lag spool hold Us th small spool hold to hold nao o small spools of thad. Small spool hold t Us th spool hold (spcial) to hold th spcific siz of th spool of thads as shon. Th sizs of th spools of thad a as follos; Th hol diamt of th spool has a ang of 3/8 to 7/16 (9.5 to 10.5 mm)), and th spool lngth has a ang of 2 3/4 to 3 (70 to 75 mm). Spool hold (spcial) Hol diamt (3/8 to 7/16 ) t Spool lngth (2 3/4 to 3 ) Fimly inst th spool hold (spcial) into th hol and hold th spool as illustatd. Exta spool pin Us th xta spool pin hn you nd to ind a bobbin ithout unthading th machin hil oking on a sing pojct. Inst th xta spool pin into th hol as shon. Plac a spool of thad on th xta spool pin and fix th spool ith th spool hold. Exta spool pin Hol fo xta spool pin Lag spool hold Th xta spool pin is also usd fo tin ndl sing. 14

17 Winding th bobbin St th spd contol slid at th fastst position (f to pag 11). z x z Pull th thad fom th spool. Hold th thad ith both hands and pass th thad into th guid slot. Da th thad to th lft and foad aound th thad guid. Da th thad to th a and to th ight aound and und th guid plat. Guid slot Thad guid Guid plat x Fimly pull th thad to th ight hil holding it ith both hands. c v c Put th bobbin on th bobbin ind spindl t. Bobbin t Bobbin ind spindl t v Pass th thad to th bobbin. Hold th thad ith both hands and ind it aound th bobbin clockis sval tims. b n b Inst th thad into on of th slits u of th flang plat y and pull th thad to cut. y Flang plat u Slit n Push th bobbin to th ight. Th visual touch scn ill sho th bobbin inding sign. u m, y m Stat th machin. Stop th machin hn th bobbin is fully ound and stops spinning. Rtun th bobbin ind spindl to its oiginal position., Rmov th bobbin. Cut th thad ith bobbin thad cutt B i. i Bobbin thad cutt B i Fo safty puposs, th machin ill automatically stop 1.5 minuts aft stating bobbin inding. 15

18 z Insting th bobbin z Pss th lockout ky. Plac a bobbin in th bobbin hold ith th thad unning off countclockis as shon on th hook cov plat. Lockout ky End of thad Bobbin hold Hook cov plat x t x Hold th bobbin ith you fingtip so it dos not otat. Guid th thad into th font notch of th bobbin hold. Pull th thad to th lft to pass it und th guid. t Font notch y Guid y c u c Da th thad to th lft to pass it into th guid path makd 1. Mak su that th thad coms out fom th sid notch of th bobbin hold. u Guid path 1 i Sid notch Coct i Wong If th thad dos not com out fom th sid notch, thad fom stp z. i i v o!0 v Continu to da th thad along th guid path makd 2 and pull th thad to th ight though th slit. Th thad ill b cut to a pop lngth and hld in plac. o Guid path 2! 0 Slit (Thad cutt) b b St th lft dg of th hook cov plat into opning. Push don th hook cov plat to fit in plac. Unlss othis notd, you can stat sing ithout daing up th bobbin thad. Rf to pag 19 fo ho to da up th bobbin thad. 16

19 v x z Thading th Machin CAUTION: Alays mak su to pss th lockout ky to lockout th machin bfo thading th machin. b z n m c Pss th ndl up/don button to ais th tak-up lv to th highst position. Pss th lockout ky to lockout th machin. Th pss foot ill go don and th upp thad tnsion disks ill opn. Lockout ky Pass th thad in od z to,. z Hold th thad ith both hands and pass th thad into th guid slot. Guid slot x B su that th thad is pulld don und th notch and into th spac blo th guid slot as shon. Notch x c Hold th thad ith both hands and da th thad aound th con of th guid. Fimly pull th thad toad you along th ight channl until th thad snaps. Con of th guid t Right channl v i c u y t v Da th thad don along th ight channl and aound th bottom of th thad guid plat. Pull th thad up along th lft channl. t Right channl y Thad guid plat u Lft channl b Whil holding th thad at th spool, fimly da th thad up and to th back of th tak-up lv. Da th thad foad to slip it into th y of th tak-up lv. i Ey of th tak-up lv b n m o n Thn pull th thad don along th lft channl and though th lo thad guid. o Lo thad guid!0 m Slid th thad fom th ight of th ndl ba thad guid to th lft.!0 Ndl ba thad guid, Thad th ndl ith th ndl thad (f to th nxt pag). 17

20 z Built-in Ndl Thad Th ndl thad can b usd ith a #11 to #16 ndl. Thad siz 50 to 90 is commndd. Do not us thad siz 30 o thick. Th ndl thad cannot b usd ith th tin ndl. x z Pss th ndl up/don button to ais th ndl. Pss th lockout ky to lock th machin. Ndl up/don button Lockout ky x Da th thad though th slit of th ndl thad. Th thad should pass und th hook. Slit Hook c c Pull th thad up and slip it btn th thad cutt and fac plat fom bhind. Pull th thad toad you to cut. v v Pull don th ndl thad knob as fa as it ill go. b b Rais th thad sloly so a loop of th thad is pulld up though th ndl y. n n Pull th thad loop to tak th thad nd out though th ndl y to th a. If th thad is caught in th hook and th thad loop is not fomd, mov th thad fom th hook and pull it to tak th thad nd out though th ndl y. 18

21 z Daing up th Bobbin Thad Aft using auto thad cutting o thading th bobbin hold, you can stat sing ithout daing up th bobbin thad. Hov, you nd to da up th bobbin thad hn sing gathing stitchs tc. z Rmov th bobbin. Inst th bobbin into th bobbin hold again and thad th bobbin hold accoding to th instuctions on pag 16, but lav a 10 cm (4 ) tail of bobbin thad as shon. Bobbin thad Do not cut th bobbin thad ith th thad cutt. Thad cutt x x Rais th pss foot. Hold th ndl thad lightly ith you lft hand. Ndl thad c c Pss th ndl up/don button tic to lo and ais th ndl and pick up th bobbin thad. Ndl up/don button v v Pull both thads 10 cm (4 ) und and bhind th pss foot. 19

22 Rplacing Ndls CAUTION: Alays mak su to pss th lockout ky to lockout th machin bfo placing th ndl. Rais th ndl by pssing th ndl up/don button. Pss th lockout ky. Lockout ky Loosn th ndl clamp sc by tuning it countclockis. Rmov th ndl fom th clamp. Ndl clamp sc Inst a n ndl into th ndl clamp ith th flat sid of th ndl to th a. Flat sid Whn insting th ndl into th ndl clamp, push it up against th stopp pin and tightn th ndl clamp sc fimly ith a scdiv. To chck ndl staightnss, plac th flat sid of th ndl onto somthing flat (a ndl plat, glass tc.). Th gap btn th ndl and th flat sufac should b consistnt. Gap Nv us a blunt ndl. Fin Mdium Havy ight Fabic Thad Ndl Lan Gogtt Ticot Oganza Cp Shting Jsy Boadcloth Flc Dnim Td Coating Quilting Silk # Cotton # Synthtic # Silk #50 Cotton #50-80 Synthtic #50-80 Silk #30-50 Cotton #40-50 Synthtic #40-50 Blu tip ndl Univsal ndl #9/65-11/75 Rd tip ndl Pupl tip ndl Univsal ndl #11/75-14/90 Rd tip ndl Pupl tip ndl Univsal ndl #14/90-16/100 1 x tin ndl, 2 x blu tip ndl (#11/75), 1 x d tip ndl (#14/90) and 1 x pupl tip ndl (#14/90) a includd in th ndl cas (Pat No ). Fabic and Ndl Chat Fo gnal sing, us d ndl. Fin thads and ndls should b usd fo sing fin fabics. In gnal, us th sam thad fo both ndl and bobbin. Us a blu tip ndl fo sing fin fabics, sttch fabics, ticot and buttonhols to pvnt skippd stitchs. Us a pupl tip ndl fo sing knits, f uilting and acoss th hm to pvnt skippd stitchs. Us a stabiliz o intfac to sttch o fin fabics to pvnt sam pucking. Alays tst th thad and ndl siz on a small pic of th sam fabic you ill us fo actual sing. 20

23 Rplacing th Pss Foot CAUTION: Alays mak su to pss th lockout ky to bfo placing th pss foot. Us th pop foot fo th slctd pattn. Th ong foot can caus th ndl to bak. Rais th ndl by pssing th ndl up/don button. Pss th lockout ky. Ndl up/don button Lockout ky Rais th pss foot lift. Pss foot lift Pss th black lv on th back of th foot hold. Th pss foot ill dop off. Lv CAUTION: To avoid damaging th lv, do not push it don. y t u Plac th pss foot so that th pin on th foot lis just und th goov of th foot hold. Lo th pss ba to lock th foot in plac. Each foot is makd ith an idntification ltt. t Pin y Goov u Idntification ltt 21

24 Rmoving and Attaching th Foot Hold Rmov th foot hold bfo using th dual fd foot o daning foot. CAUTION: Alays mak su to pss th lockout ky to lockout th machin bfo placing th foot hold. Rmoving th foot hold Rais th ndl by pssing th ndl up/don button. Pss th lockout ky and ais th pss foot ith th pss foot lift. Ndl up/don button Lockout ky Pss foot lift t Loosn th stsc and mov th foot hold. Stsc t Foot hold t y Attaching th foot hold Attach th foot hold to th pss ba fom th a. Tightn th thumbsc sculy ith th scdiv. y Pss ba 22

25 Attaching th Dual Fd Foot Attach th dual fd hold to th pss ba. Dual fd hold Tightn th thumbsc ith you fings. Push th dual fd link to ngag it ith upp fd div. Dual fd link Upp fd div Lo th pss foot lift. Lo th ndl to th lost position by tuning th hand hl. Tightn th thumbsc sculy ith th scdiv. Attaching th Daning Foot PD-H Attach th daning foot PD-H to th pss ba by putting th pin on th ndl clamp sc. Pin Ndl clamp sc Tightn th thumbsc fimly ith th scdiv. Attaching th Pofssional gad Foot HP Attach th pofssional gad foot HP to th pss ba. Tightn th thumbsc fimly ith th scdiv. 23

26 z Rplacing th Ndl Plat Us th staight stitch ndl plat hn sing ith th dual fd foot. Us th pofssional gad plat hn sing ith th pofssional gad foot. x t CAUTION: Alays mak su to pss th lockout ky to lockout th machin bfo placing th ndl plat. Whn th staight stitch ndl plat o th pofssional gad plat is attachd to th machin, th pattns not suitabl fo th staight stitch ndl plat o th pofssional gad plat cannot b slctd. z Pss th ndl up/don button to ais th ndl. Pss th lockout ky. Pss th pss foot lift button to ais th pss foot. Ndl up/don button Lockout ky Pss foot lift button x Slid th xtnsion tabl to th lft to mov it. Push don th ndl plat las lv and th ndl plat ill snap off. Ndl plat las lv t Ndl plat c c A mssag ill appa aning that th ndl plat is not scud. Rmov th ndl plat to th ight. Plac th staight stitch ndl plat o pofssional gad plat on th machin. St th lft dg of th ndl plat into th opning. v y v Push don on th mak of th ndl plat until it locks in plac. Mak su th aning mssag disappas and th staight stitch is automatically slctd. Tun th hand hl sloly and mak su that th ndl dos not hit th ndl plat. Pss th lockout ky to unlock. y Mak CAUTION: Nv pss th ndl plat las lv hil unning th machin. 24

27 Rtactabl Sing Light In addition to th tin LED lights, th machin is uippd ith a tactabl light. Plac you fing on th tab and slid th am toads you. Th light ill tun on automatically. Adjust th angl of th light to illuminat th oking aa. Am Tab Push back th am to tun th light off and sto it. CAUTION: Do not hit o xt xcssiv foc on th am of th tactabl sing light as this may caus damag hn it is xtndd. Dopping th Fd Dog Th fd dog can b lod fo sing on buttons, f motion uilting tc. Shift th dop fd lv toad you to lo th fd dog. Dop fd lv Fd dog Shift th dop fd lv aay fom you to ais th fd dog, it ill tun to th up position hn you stat th machin. If you stat th machin ith th fd dog lod, a mssag ill appa on th visual touch scn. 25 Raising and Loing th Pss Foot You can ais and lo th pss foot ith th pss foot lift button, th pss foot lift o th kn lift. Pss foot lift button Pss foot lift Exta liftd position You can ais th pss foot about 7 mm (1/4 ) high than th nomal up position by xting mo pssu hn lifting th pss foot lift o kn lift. This allos fo changing th ndl plat, and also hlps you to plac lays of thick fabics. Th pss foot cannot b lod ith th pss foot lift if th foot as aisd ith th pss foot lift button. Do not tun th hand hl o pss th up/don ndl button hn th pss foot is in th xta liftd position.

28 Kn Lift Th kn lift is xtmly hlpful hn sing patchok, uilting tc, sinc it allos you to handl th fabic hil you kn contols th pss foot. Attaching th kn lift Match th ibs on th kn lift ith th notchs in th kn lift sockt and inst th kn lift. Kn lift Rib Kn lift sockt Adjusting th kn lift Th angl of th kn lift can b adjustd to fit you. Loosn th stsc and slid th angl ba in o out to adjust th angl of th kn lift. Tightn th stsc to scu th angl ba. Stsc t Angl ba t Using th kn lift Push th kn lift ith you kn to asily mov th pss foot up and don. You can contol ho high th foot iss by th amount of kn pssu you xt. Using th Cloth Guid Rmov th xtnsion tabl and attach th xta id tabl. Attach th cloth guid to th f am by pushing th cloth guid don to snap it in plac. Slid th cloth guid to th dsid position. Plac th fabic ith its dg against th cloth guid and s. Cloth guid F am 26

29 ORDINARY SEWING MODE Odinay Stitch Pattns In th odinay sing mod, th a 4 catgois availabl. Utility stitchs, Buttonhol and spcialty stitchs Dcoativ and uilting stitchs Monogamming Sing applications Pss on of th icon kys to slct th catgoy. In this manual, th pattn numb fs to th initial fo ach goup o catgoy. Fo xampl pattn #15 in th buttonhols and spcialty stitchs is fd to as pattn B15. Utility stitchs, Buttonhols and spciality stitchs You can slct utility stitchs (U), buttonhols and spciality stitchs (B) in this catgoy. (A) (Q) (BR) (H) (S) (D) (L) (PL) (P) (CS) Dcoativ and uilting stitchs This catgoy consists of th folloing 10 goups. Appliu stitchs (A) Hiloom stitchs (H) Quilting stitchs (Q) Satin stitchs (S) Bidg stitchs (BR) Dcoativ stitchs (D) Long stitchs (L) Pictogaph stitchs (P) Play stitchs (PL) Catd Stitchs (CS)* Monogamming You can pogam ltting as ll as a combination of chaacts. * Catd Stitchs catgoy appas hn stitch pattns catd ith Stitch Compos a impotd to th machin. 27

30 Sing applications You can slct th appopiat stitch fo a spcific sing pojct and fabic typ fom th dsignatd application in this catgoy. Function Kys in Odinay Sing Mod Foot-up ky If this option is tund on, th ndl stops at th don position and th pss foot ill automatically go up hn th machin stops. Pss this ky to tun this option on o off (f to pag 38). Tin ndl ky Pss this ky to st th stitch idth fo tin ndl sing (f to pag 65). Dual fd ky Pss this ky fo dual fd sing (f to pag 33). Statov ky If you stop sing in th middl of a stitch pattn and ish to s th pattn again fom th bginning, pss this ky bfo you stat sing. Pss this ky onc to statov fom th bginning of th cunt pattn, o pss this ky tic to statov fom th bginning of th fist pattn of th combination (f to pag 68). 28

31 !0 t y u i o t Pogam ky Pss this ky to pogam a pattn combination. Whn this ky is pssd, th dlt ky, mio imag kys, sav fil ky and cuso kys ill appa. y Vtical mio imag ky Pss this ky to s a vtical mio imag of th slctd pattn (f to pag 66). u Hoizontal mio imag ky Pss this ky to s a hoizontal mio imag of th slctd pattn. Th ky is gayd out if th slctd pattn cannot b tund ov (f to pag 66). i Dlt ky Pss this ky to dlt th pattn fom th pattn combination. o Sav fil ky Pss this ky to sav th pattn combination as a fil.!0 Cuso kys Pss on of th cuso kys to mov th cuso up o don.!0!1!2!1 Ltt siz ky Pss this ky to slct th full siz (L) o small siz (S).!2 Ltt cas ky Pss this ky to slct upp cas o lo cas fo monogams. 29

32 Utility Stitchs Staight Stitchs Pattns U1 to U5 a staight stitchs fo saming. Pss th pattn slction ky fo th dsid stitch. Stating to s Plac th fabic nxt to th sam guid lin on th ndl plat. Lo th ndl to th point h you ant to stat. Pull th ndl thad toads th a and lo th foot. Pull th ndl thad to th lft hn using satin stitch foot F, opn-to satin stitch foot F2, dual fd foot o automatic buttonhol foot R. Pss th stat/stop button o foot contol to stat sing. Gntly guid th fabic along th sam guid lin ltting th fabic go natually. Stat/stop button Sing fom th Edg of Thick Fabic Th black button on th zigzag foot locks th foot in th hoizontal position. This is hlpful hn you stat sing at th xtm dg of thick fabics o fo sing acoss a hm. Lo th ndl into th fabic at th point h you ish to stat sing. Lo th foot hil pushing in th black button. Th foot is lockd in th hoizontal position to avoid slipping. Aft a f stitchs, th black button is lasd automatically. Black button Changing Sing Diction Stop th machin and pss th pss foot lift button to ais th pss foot. Pivot th fabic aound th ndl to chang th sing diction as dsid. Stat sing in a n diction. If you tun on th foot up option, th pss foot ill automatically go up hn th machin stops (f to pag 38). 5/8 Tuning a Sua Con To maintain a 5/8 sam alloanc aft tuning a sua con, us th coning guid on th ndl plat. Stop sing hn th font dg of fabic achs th coning guid lins. Pss th foot lift button and tun th fabic 90 dgs. Stat sing in th n diction. Coning guid 30

33 Scuing Sams Fo fastning th nds of sams, pss th vs button and s sval vs stitchs. Th machin ss in vs as long as you pss and hold th vs button. Rvs button Pss th vs button onc hn sing th locka-matic stitch (pattn U2) o locking stitch (pattn U3) and th machin ill lock th stitchs off and stop automatically. Cutting Thads To cut th thads aft finishing sing, pss th thad cutt button. Th ndl ba and pss foot ill automatically go up aft timming th thads. Thad cutt button Th thad cutt button dos not function hn th pss foot is up o th LED signal is tund off. Us th thad cutt on th fac cov to cut spcializd o thick thads if th auto thad cutt dos not ok ll. LED signal To us th thad cutt on th fac plat, mov th fabic and da it to th back. Pull th thads up and slip thm btn th thad cutt and fac plat fom bhind. Pull th thads toad you to cut. Thad cutt Ndl Plat Guids Th sam guids a makd on th ndl plat, f am and hook cov. Th sam guids fo 1/4, 3/8 and 5/8 a also makd on th font of th ndl plat. Sam guids on th font of th ndl plat Th numbs on th ndl plat indicat th distanc fom th cnt ndl position in millimts and inchs. Cnt ndl position Th coning guids a vy usful hn tuning a sua con. Coning guid Th angl scals on th ndl plat a usful fo patchok picing (f to pag 62). Angl scals 31

34 Vaity of Staight Stitchs U1 Staight stitch in cnt ndl position Us this stitch fo saming, olld hmming tc. U2 Lock-a-matic stitch Us this stitch to scu th bginning and th nd of a sam ith backstitching. Whn you ach th nd of th sam, pss th vs button onc. Th machin ill s fou vs stitchs, fou foad stitchs, and thn stop sing automatically. U3 Locking stitch This uniu stitch is usd h an invisibl locking stitch is ndd. Th machin ill s sval locking stitchs at th bginning and continu sing foad. Whn you pss th vs button at th nd of th sam, th machin ill s sval locking stitchs in plac, thn stop sing automatically. U4 Staight stitch in lft ndl position Us this stitch to sam fabics clos to th dg. U5 Tipl sttch stitch This stong, duabl stitch is commndd fo aas h both lasticity and stngth a ndd to nsu comfot and duability. Us it to infoc aas such as cotch and amhol sams. Also us it hn constucting itms such as backpacks fo xta stngth. U6, U7 Sttch stitchs Ths a nao sttch stitchs dsignd to liminat pucking on knit fabics and bias sams, hil pmitting th sam to b pssd compltly opn flat. Us U7 fo saming fin fabics o sttch fabics. 32

35 Sing ith th Dual Fd Dvic Pattns U1 to U5 and Q1 to Q7 can b sn ith th dual fd dvic. Th dual fd dvic is xtmly ffctiv hn sing had to fd matials such as PVC coatd fabic o lath. It also liminats lay slippag. S pag 23 fo ho to attach th dual fd foot and to ngag th dual fd dvic. Pss th dual fd ky and slct th dsid pattn. Th pattns not suitabl fo dual fd sing a gayd out. Th dual fd ky ill gay out o not b indicatd if you slctd a pattn not suitabl fo dual fd sing. Plac th fabic und th foot and lo th ndl at th point h you ish to stat. Stat sing at mdium spd. Whn saming plaid fabics, match th plaids of th upp and lo lays and pin thm togth. Rmov th pins as you s. Dual fd balancing dial Th dual fd balancing dial should b st at 0, hov you may nd to adjust th dual fd balanc dpnding on th typ of fabic. Chck th fd balanc by tst sing on a scap pic of th fabic you intnd to us. (A) (A): If th lo lay pucks, tun th dual fd balancing dial toad +. (B) (B): If th upp lay pucks, tun th dual fd balancing dial toad. Upp lay Lo lay Dual fd balancing dial 33

36 Sing ith th Pofssional gad foot HP Pattns U1 to U4 and Q1 to Q5 can b sn ith th pofssional gad foot. Us th pofssional gad foot fo th staight stitch ith a pofssional sult. S pag 23 fo ho to attach th pofssional gad foot. Rplac th ndl plat ith th pofssional gad ndl plat hn using pofssional gad foot. S pag 24 fo ho to attach th pofssional gad ndl plat. Attach th pofssional gad ndl plat and pofssional gad foot HP and slct th dsid pattn. Th pattns not suitabl fo th pofssional gad ndl plat a gayd out. Plac th fabic und th foot and lo th ndl at th point h you ish to stat and s. 34

37 U11 Basting S pag 86 fo sing instuctions. Zigzag Stitchs U8, U9 Zigzag stitchs Zigzag stitchs a usd fo vaious sing nds including ovcasting. Ths stitchs can b usd on most ovn fabics. A dns zigzag stitch can also b usd fo appliu. U10 Multipl zigzag stitchs Ths stitchs a usd fo mnding tas. 35

38 Vaity of Ovcasting Stitchs U10 Multipl zigzag stitch This stitch is usd to finish a a dg of synthtics and oth sttch fabics that tnd to puck. S along th fabic dg laving an aduat sam alloanc. Aft sing, tim off th sam alloanc clos to th stitchs. U13 Ovcasting stitch This stitch can b usd to simultanously sam and ovcast dgs of fabics. Us this stitch hn you do not nd to opn sams flat. Plac th fabic dg nxt to th guid of th foot and s. U14 Knit stitch This stitch is commndd fo sing such fabics as synthtic knits and sttch vlou as it povids th gatst amount of lasticity and stngth. Plac th fabic dg nxt to th guid of th foot and s. Fo btt sults, us th zigzag foot A and s laving an aduat sam alloanc. Aft sing, tim th sam alloanc clos to th stitchs. U15 Doubl ovdg stitch This stitch is xcllnt fo fabics that tnd to fay xtnsivly such as linns and gabadins. Plac th fabic dg nxt to th guid of th foot and s. To os of zigzag stitchs a simultanously sn ov th dg to insu that th fabic ill not avl. U16 Ovlock stitch This stitch finishs th dgs of fabic in a ay simila to a commcial ovlocking machin fo a pofssional look. Plac th fabic dg nxt to th guid of th foot and s. 36

39 Manual Stitch Sttings You can alt th stitch idth (o ndl dop position of th staight stitchs) and stitch lngth. Pss th + o ky bsid th stting you ish to chang. Pss dfault ky to cov th oiginal stitch stting. Whn you pss th stting ba, th manual stting indo xpands to sho mo options. You can alt oth sttings such as ndl thad tnsion and pss foot pssu valu, dpnding on th slctd stitch pattn. Pss th stting ba again to shink th manual stting indo. Stting ba Manual stting indo Dfault ky Alting ndl dop position (staight stitchs) Pss th + ky to mov th ndl dop position to th ight. Pss th ky to mov th ndl dop position to th lft. ( ) (4.5) (+) ( ) (3.0) (+) Alting stitch idth Pss th + ky to incas th stitch idth. Pss th ky to dcas th stitch idth. Th adjustabl ang of pattns U6-U10 is 0.0 to 7.0. Alting stitch lngth Pss th + ky to incas th stitch lngth. Pss th ky to dcas th stitch lngth. ( ) (+) ( ) (+) Th adjustabl ang of pattns U6 is 0.0 to 5.0, U7 is 1.0 to 5.0, U8-U10 is 0.0 to

40 Adjusting Thad Tnsion This machin is uippd ith automatic thad tnsion contol, hich optimizs th tnsion balanc fo th slctd stitch pattn. Balancd thad tnsion Staight stitch: Both ndl and bobbin thads intlock btn th lays. Zigzag stitch: Th ndl thad appas slightly on th ong sid of th fabic. Hov you may nd to manually adjust th tnsion balanc dpnding on th sing conditions, o you can fin-tun th thad tnsion to suit you pfnc. Pss th + ky if th tnsion is too loos. Pss th ky if th tnsion is too tight. Adjusting Foot Pssu Contol Th pss foot pssu is automatically optimizd fo ach stitch pattn. Hov, you can adjust th foot pssu manually by pssing th + ky o ky to suit you spcific sing nds. Foot up fo Pivoting If this option is tund on, th pss foot ill automatically go up hn th machin stops. This fatu is vy usful hn tuning cons. Pss th foot-up ky to tun this option on o off. Foot-up ky Hight of th foot can b altd in th odinay sing stting mod (f to pag 98). 38

41 Favoit Stitch Adjustmnt You can sav customizd stitch sttings (stitch lngth, stitch idth, thad tnsion and pss foot pssu, dpnding on th slctd stitch pattns) as Favoit Stitch Adjustmnt. Whn th favoit stitch adjustmnt option is tund ON (f to pag 99), th last-usd customizd stitch sttings a automatically assignd hn th stitch pattn is slctd. Favoit stitch option cannot b assignd fo catd stitch (CS). Favoit stitch option cannot b usd in monogam mod. Exampl: To chang th pst valu of th ndl dop position fom 4.5 to 5.0. Tun th Favoit Stitch Adjustmnt option ON (f to pag 99). Slct stitch pattn U1. Pss th stting ba. Th manual stting indo xpands to sho mo options. Th favoit stitch ky appas on th manual stting indo. Chang th ndl dop position fom 4.5 to 5.0 by pssing + ky. Pss th favoit ky. Th dialog box ill opn. Pss th sav favoit ky to gist th favoit stitch sttings. t Th cam colod box t indicats that th customizd pst stitch valu is applid to th stting. To dlt favoit stitch sttings, pss th favoit stitch ky and pss th dlt ky. 39

42 Oth Utility Stitchs U12 Backad stitch U12 is backad stitch. Us th stitch if it is had to guid th fabic hil pssing th vs button. Th machin ss in vs ithout pssing th vs button so that you can guid th fabic ith both hands. U17 Hmstitch Us this stitch fo fagoting o dcoativ stitch. U18 Visibl hmming Slct pattn U18. Fold and pss a singl hm. Plac th fabic ith th ight sid up. S along th fold at th dsid dpth. Tim th xcss on th ong sid. 40

43 U19, U20 Blind Hm Rf to pag 78 fo sing instuction. U21, U23 Shll Tuck Rf to pag 79 fo sing instuction. U22 Fagotting Us th stitch to join to pics of fabic to cat an opn ok appaanc and add stitch intst. 41

44 Buttonhols and Spcialty Stitchs Vaity of Buttonhols B1 Snso (Sua) buttonhol This sua buttonhol is idly usd on mdium to havy ight fabics. Th buttonhol siz is automatically dtmind by placing a button in th foot. B2 Auto (Sua) buttonhol This is also a sua buttonhol simila to th snso sua buttonhol, but you can manually st th buttonhol siz and th machin mmoizs it to s buttonhols of th sam siz. B3 Round nd buttonhol This buttonhol is usd on fin to mdium ight fabics spcially fo blouss and childn's cloths. B4 Fin fabic buttonhol This buttonhol is oundd at both nds and is usd on fin, dlicat fabics such as fin silk. B5 Kyhol buttonhol Th kyhol buttonhol is idly usd on mdium to havy ight fabics. It is also suitabl fo lag and thick buttons. B6 Roundd kyhol buttonhol This buttonhol is usd fo thick buttons on mdium ight fabics. B7 Tailod buttonhol This duabl buttonhol is usd ith thick buttons and havy fabics. B8 Sttch buttonhol This buttonhol is suitabl fo sttch fabics. It can also b usd as a dcoativ buttonhol. B9 Knit buttonhol This buttonhol is suitabl fo knit fabics. It can also b usd as a dcoativ buttonhol. B10 Antiu buttonhol This buttonhol looks lik th hiloom stitch. It has an attactiv handmad appaanc and maks a nic dcoativ buttonhol. B11 Wltd buttonhol This is a tmplat pattn fo th hand sn ltd (bound) buttonhol. B3-B11 a snso buttonhols and th sing pocdu is th sam as fo B1. 42

45 B1 Snso (Sua) Buttonhol Th siz of a buttonhol is automatically st by placing a button in th a of automatic buttonhol foot R. Th button hold of th foot taks a button siz of 1 cm (3/8 ) to 2.5 cm (1 ) in diamt. Whn slcting th buttonhols, th visual touch scn advis you to lo th buttonhol lv. It is somtims ncssay to chang buttonhol siz to match ctain havy o spcific fabics and thads. Mak a tst buttonhol on an xta pic of th fabic to chck you sttings. Th pst idth of th buttonhol is suitd fo odinay buttons. Apply an intfacing to sttch o fin fabics. z Sing z Pull th button hold to th back, and plac th button in it. Push it togth tightly on th button. Button hold Chck th lngth of th tst buttonhol, and adjust th buttonhol lngth if ncssay by tuning th adjusting sc on th buttonhol foot. To incas th buttonhol lngth, tun th adjusting sc to mov th mak toad L. To dcas th buttonhol lngth, tun th adjusting sc to mov th mak toad S. Adjusting sc Mak x t x Pss th ndl up/don button to ais th ndl. Pss th lockout ky. Rais th pss foot and attach th automatic buttonhol foot R snapping th pin into th goov of th foot hold. You may lift th pss foot lift to th xta liftd position hn placing th automatic buttonhol foot und th foot hold. Pss th lockout ky to unlock th machin. Goov t Pin 43

46 c c Da th ndl thad to th lft though th hol of th foot. Mak th buttonhol position on th fabic and plac it und th buttonhol foot. Lo th ndl at th stating point by tuning th hand hl. y Stating point v y v Lo th pss foot and pull th buttonhol lv don as fa as it ill go. u Buttonhol lv u i Mak su th is no gap btn th slid and font stopp, othis th buttonhol ill b out of position o th ill b a sing gap. i No gap o Stating point!0 Sing gap b!0!0!0 o o o b Stat sing hil pulling th ndl thad lightly to th lft. Aft sing a f stitchs, f th thad and continu sing. If you stat sing ithout pulling don th buttonhol lv, th visual touch scn ill sho a aning and th machin ill stop aft a f stitchs. Pull th buttonhol lv don and stat sing. 44

47 n n Th buttonhol is sn automatically in th sunc shon. Whn th buttonhol is finishd, th machin ill stop automatically ith th ndl in th up position. Pss th thad cutt button and mov th fabic. m m Aft you finish buttonhol sing, push th buttonhol lv up as fa as it ill go.,, Plac a pin just blo th batack at ach nd to pvnt accidntally cutting th thads. Cut th opning ith th sam ipp. Us an ylt punch to opn a kyhol buttonhol. Doubl lay buttonhol To mak a study buttonhol, s anoth lay of buttonhol stitchs ov th pvious stitchs. Aft th buttonhol is finishd, simply stat th machin again. Do not ais th foot o buttonhol lv. Do not slct th pattn. This function is disabld if Thad Cut aft Auto- Lock option is tund on in th odinay sing stting mod (f to pag 99). 45

48 Manual sttings Whn you pss th stting ba, th manual stting indo xpands to sho mo options. Stting ba Alting buttonhol opning idth Pss th + ky to mak th buttonhol opning id. Pss th ky to mak th buttonhol opning nao. Alting buttonhol idth Pss th + ky to incas th buttonhol idth. Pss th ky to dcas th buttonhol idth. Alting buttonhol stitch dnsity Pss th + ky to mak th buttonhol stitchs lss dns. Pss th ky to mak th buttonhol stitchs dns. 46 Th opning idth can b adjustd fom 0.2 to 2.0. Th buttonhol idth can b adjustd fom 2.6 to 9.0. Th stitch dnsity can b adjustd fom 0.20 to 1.00.

49 Using th Stabiliz Plat Th stabiliz plat holds and suppots th fabic so it is hlpful hn sing buttonhols ov th hm of thick fabics. z z Inst th tab of th stabiliz plat into th slot of th buttonhol foot. Stabiliz plat Slot x x Plac th button on th button hold of th foot. Attach th buttonhol foot to th machin. Da th ndl thad to th lft btn th foot and stabiliz plat. c c Plac th fabic btn th buttonhol foot and stabiliz plat. Lo th ndl into th stating point by tuning th hand hl. Lo th foot and buttonhol lv. Stat th machin hil pulling th ndl thad lightly to th lft. Aft sing a f stitchs, f th thad and continu sing. Th sing pocdu is xactly th sam as that fo B1 snso (sua) buttonhols. 47

50 B2 Automatic (sua) Buttonhol Pull th button hold all th ay out. Mak th buttonhol position on th fabic. Plac th fabic und th foot, and lo th ndl at th stating point. Lo th foot and stat sing hil pulling th ndl thad lightly to th lft. Aft sing a f stitchs, f th thad and continu sing. You do not nd to pull don th buttonhol lv. If you ish to s a buttonhol long than th siz pmittd by th automatic buttonhol foot R, us satin stitch foot F. Th opning idth can b adjustd fom 0.2 to 2.0. Th buttonhol idth can b adjustd fom 2.6 to 9.0. Th stitch dnsity can b adjustd fom 0.20 to z z S th lft sid up to th uid buttonhol lngth and stop th machin. Thn pss th vs button. x x Stat sing again, and th machin ss back ith a staight stitch. Stop th machin hn you ach th stating point. Thn pss th vs button. 48

51 c c Stat sing again, and th machin ss th font batack and ight sid of th buttonhol. Stop th machin hn you ach th nding point. Thn pss th vs button. v v Stat sing again, and machin ss th back batack and locking stitchs thn stops automatically ith th ndl in th up position. Whn th buttonhol is finishd, a mssag ill appa. To mak th nxt buttonhol, position th fabic and stat sing again. Th mssag disappas and th machin ss anoth buttonhol idntical to th fist on thn stops automatically. To s anoth buttonhol in a diffnt siz pss th X ky on th dialog box. To cut th buttonhol opning, f to th instuctions on pag 45. Th mmoizd lngth ill b canclld if th pss foot is aisd o th statov ky is pssd bfo buttonhol is compltd. 49

52 Oth Buttonhols B3, B4 Round nd and fin fabic buttonhols Th sing pocdu is th sam as that of B1 sua (snso) buttonhol (f to pags 43-45). Th opning idth can b adjustd fom 0.2 to 2.0. Th buttonhol idth can b adjustd fom 2.6 to 9.0. Th stitch dnsity can b adjustd fom 0.20 to B5-B7 Kyhol buttonhols Th sing pocdu is th sam as B1 sua (snso) buttonhol (f to pags 43-45). Us an ylt punch to opn th kyhol buttonhol. Th opning idth can b adjustd fom 0.2 to 2.0. Th buttonhol idth can b adjustd fom 5.6 to 9.0. Th stitch dnsity can b adjustd fom 0.20 to B8, B10 Sttch and Antiu buttonhols Th sing pocdu is th sam as B1 sua (snso) buttonhol (f to pags 43-45). Th sing stps a as shon. Th opning idth can b adjustd fom 0.2 to 2.0. Th buttonhol idth can b adjustd fom 2.6 to 9.0. Th stitch dnsity can b adjustd fom 0.50 to 1.00 (B8), fom 0.50 to 2.50 (B10). B9 Knit buttonhol Th sing pocdu is th sam as B1 sua (snso) buttonhol (f to pags 43-45). Th opning idth can b adjustd fom 0.2 to 2.0. Th buttonhol idth can b adjustd fom 2.6 to 9.0. Th stitch dnsity can b adjustd fom 0.70 to

53 B11 Wltd Buttonhol (Bound Buttonhol) A ltd buttonhol is mad by stitching a stip o patch of fabic to th buttonhol. Wltd buttonhols a paticulaly suitabl fo tailod gamnts, but a not commndd fo sh o dlicat fabics h th patch might sho though o add bulk. z z Bast a patch to th gamnt fabic ith th ight sids togth. Wong sid of patch Right sid of gamnt fabic x x Slct pattn B11. S th ltd buttonhol on both fabics togth. Cut th buttonhol opning as illustatd thn pull th patch out though th slit to th oth sid. Wong sid of patch Right sid of gamnt fabic Right sid of patch c c Pull out th patch until th ight sid of th patch is shoing. Us an ion to pss both con nds until thy a suad off. Right sid of patch Wong sid of gamnt fabic v v Fold back ach sid of th patch to fom buttonhol lips. Wong sid of patch Right sid of patch b b Pss both folds ith an ion. Right sid of patch Wong sid of gamnt fabic n n Bast both dgs of th sam ith a ndl and thad by hand. Right sid of gamnt fabic 51

54 m t m Fold ov th lngth of th gamnt fabic, s back and foth bsid th oiginal sam to scu flaps of th patch. Wong sid of gamnt fabic t S back and foth,, Fold ov th nd of fabic and s back and foth th tims ov th tiangula nd. Wong sid of patch Right sid of gamnt fabic Wong sid of gamnt fabic.. Th patch should b cut 1 to 1.5 cm (7/16 5/8 ) aay fom th hol. Th cons should b cut oundd off as shon. Right sid of patch Wong sid of gamnt fabic y 0 u 0 Plac th facing on th ong sid of th gamnt fabic. Mak th 4 cons ith pins as shon. y Facing u Gamnt fabic u 1 y 1 Tun all th lays ov and cut th buttonhol opning on th facing in th sam ay as stp x. Fou mak pins sho you th con points on th facing. Fold back ach flap btn th facing and patch. y Facing u Gamnt fabic u 2 y 2 Stitch aound th opning ith a ndl and thad as shon. y Facing u Gamnt fabic 3 u 3 Th ltd buttonhol is complt. u Gamnt fabic 52

55 z Codd Buttonhol To s a codd buttonhol, follo th sam pocdu as fo B1 sua (snso) buttonhol. Slct pattn B1. z Plac th button on th button hold on th buttonhol foot. Hook a fill cod on th spu on th font of th foot. Bing th nds of cod toad th back and und th foot. Bing up th nds of th cod and inst both nds btn th ibs and mtal plat. Spu Mtal plat St th stabiliz plat as ncssay and attach th buttonhol foot. x x Lo th ndl into th fabic h th buttonhol ill stat. Lo th foot and buttonhol lv. Pull th ndl thad lightly to th lft. Stat th machin to s th buttonhol ov th cod. Th machin stops automatically hn finishd. Rmov th fabic fom th machin and cut th sing thads only. c c Cut th fill cod at both nds as clos to th buttonhol as possibl. Do not adjust th opning idth id than 0.8. St th stitch idth in accodanc ith th thicknss of th cod usd. To cut th buttonhol opning, f to th instuctions on pag

56 z Spciality Stitchs S pags 87 and 88 fo fing sing instuctions of B12 and B14. B13 Daning z Attach th automatic buttonhol foot R and pull th button hold all th ay out. Plac th fabic und th foot, and lo th ndl at th stating point. Thn lo th foot. Button hold Stating point x Stat th machin and s to th uid lngth, thn pss th vs button. This sts th daning lngth. Continu sing until th machin stops automatically. Rvs button Ruid lngth x c c S anoth lay of daning ov th fist lay, at a ight angl to it. Th maximum daning lngth is 2 cm (3/4 ) and th maximum idth is 0.9 cm (3/8 ). To s th sam siz daning Whn finishd sing, a confimation mssag ill appa. Simply stat th machin to s anoth lay of daning stitchs in th sam siz. To s th nxt lay of daning stitchs in a diffnt siz, pss th X ky. To s a shot daning S th fist lin to th dsid lngth and stop th machin. Pss th vs button and stat th machin again. Th machin ill s th st of th daning and stop automatically. To adjust th vnnss of daning stitchs You can coct unvnnss of daning stitchs by pssing th o + ky of th adjusting indo. If th lft con is lo than th ight sid, pss th ky to coct it. If th ight con is lo than th lft sid, pss th + ky to coct it. 54

57 B15 Fly Stitch Th fly stitch is a tiangl tacking stitch fo us on a zipp fly bottom and on th sid pockts of mn s pants. Attach th satin stitch foot F. To s: Plac th gamnt und th foot and lo th ndl at th stating point. S th stitch until th machin stops automatically. Stating point B16-B18 Eylts Eylts a usd fo blt hols, tc. Attach th satin stitch foot F. To s: Plac th gamnt und th foot and lo th ndl to th stating point. S until th machin stops automatically. Stating point Opn th ylt ith an al, punch o pointd scissos. To coct th shap of an ylt: If th ylt is opn, pss th ky. If th ylt ovlaps, pss th + ky. Th shap can b adjustd ithin S1 to S3 (dfault stting is S2). 55

58 Dcoativ Stitchs Dcoativ Stitchs Th pattns in this sction a classifid into 10 goups. Ths pattns a pogammabl and you can mak a pattn combination. Appliu stitchs (A): 2 pags Stitchs in this goup a fo appliu. (Rf to pag 89.) Hiloom stitchs (H): 4 pags This goup povids hiloom stitchs and coss stitchs fo caft sing and hom déco. 56

59 57 Quilting stitchs (Q): 8 pags Stitchs in this goup a fo patchok and uilting. (Rf to pags 62, )

60 Satin stitchs (S): 3 pags Th stitchs in this goup can b longatd up to 5 tims thi oiginal lngth hil th stitch dnsity mains th sam. (Rf to pag 63.) Bidg stitchs (BR): 1 pag Bidg stitchs a usd fo insting staight stitchs aft a stitch pattn. Th numb bsid th stitch imag on th staight stitch ky indicats th stitch count of a pogammabl unit. Pattns BR5, BR6 and BR8 ill inhit th ndl dop position and stitch lngth of th pvious pattn in th pogammd pattn combination. (Rf to pag 66.) 58

61 59 Dcoativ stitchs (D): 8 pags 79 attactiv pattns a availabl in this goup.

62 Long stitchs (L): 2 pags Pattns in this goup a idal fo dcoating gamnts and fo adding bod tims. Pictogaph stitchs (P): 4 pags Play stitchs (PL): 1 pag Th a many cut dsigns, fancy motifs and calligaphy availabl in ths goups. 60

63 61 Catd stitchs (CS) In this sction, you can slct oiginal stitch pattns catd ith Stitch Compos. Rf to pag 64 fo ho to tansf catd stitch pattns fom th PC to th machin.

64 Quilting(Q) Using th Quilting Guid Ba Th uilting guid ba is hlpful hn sing paalll, vnly spacd os of stitchs. Inst th uilting guid ba into th hol in th back of th foot hold. Slid th uilting guid ba and st it to th dsid spacing. Quilting guid ba Hol S os of stitchs hil tacing th pvious o of stitchs ith th uilting guid ba. Q1-Q3 Patchok Picing Pattns Q1 to Q3 a spcial stitchs fo saming patchok pics. Pattns Q2 and Q3 a fo patchok picing ith 1/4 and 7 mm sam alloancs spctivly. Us th 1/4 sam foot O. Plac th patchok pics ight sids togth. S hil guiding th dg of fabic along th guid. Guid Right sid of th fabic Angl Scals on th Ndl Plat You can asily sam patchok pics at th dsid angl ithout making, by using th angl scals on th ndl plat. Th angl scals a makd at 45, 60, 90 and 120 dgs. Us th bokn lins hn picing th patchok pics ith th 1/4 sam foot O as illustatd. Bokn lin Us th solid lins hn picing th patchok pics ith th zigzag foot A. Align th dg of th fabic to th 1/4 sam guid lin. Solid lin 1/4 sam guid lin Q71-Q74 Hand-look Quilt Stitchs Pattns Q71 to Q74 a spcial stitchs fo uilting hich look lik hand sn stitchs. Us a tanspant nylon thad fo th ndl and odinay sing thad fo th bobbin. Th bobbin thad is pulld up on th ight sid of th fabic and th stitchs look as if thy sn by hand. 62

65 S1-S24 Dcoativ Satin Stitchs Elongation Ratio Pattns S1 to S24 a dcoativ satin stitchs fo hich th pattn lngth can b longatd ithout changing th stitch dnsity. Pss th stting ba to xpand th manual stting indo. Stting ba Pss th + ky to longat th stitch pattn. + ky (longation) To duc th longation atio, pss th ky. ky (longation) Th pattn can b longatd up to 5 tims th oiginal lngth. Th longation atio is indicatd in th box. Elongation atio You can also alt stitch dnsity and stitch idth. X1 X2 X3 X4 X5 63

66 Catd Stitchs (CS) Oiginal stitch pattns catd ith Stitch Compos a savd in this goup. Inst th USB flash div containing th oiginal stitch pattns and pss th opn fil ky. Opn fil ky Slct th USB icon and th fold list ill appa. Slct th dsid fold to opn and th fil list ill appa. Slct th dsid fil and th oiginal stitch pattn is savd and th pattn slction ky is catd. You can slct, pogam and s ths pattns th sam ay as ith th built-in stitch pattns. To dlt th pattn, pss th dlt ky and slct th pattn to dlt. A confimation mssag ill appa. Pss th OK ky to dlt th pattn. Dlt ky Up to 40 pattns can b savd in this goup. Tin ndl sing is not availabl fo th catd stitchs. 64

67 v Tin Ndl Sing Som of th utility stitchs and dcoativ stitchs can b sn ith a tin ndl. x z A B Rplac th ndl ith th tin ndl supplid ith th standad accssois. CAUTION: Tun th po sitch off o pss th lockout ky bfo changing th ndl. Do not us tin ndls oth than th on includd in th standad accssois, othis th ndl may hit th ndl plat, foot o hook and bak. Lockout ky c Inst th xta spool pin into th hol und th top cov. Plac a spool of thad and th flt on th additional spool pin and th spool stand (f to pag 14). Exta spool pin Da both thads fom th spools and pass thm though th thading points fom z to v. Slip th thad A though th ndl ba thad guid b, thn pass though points n and m as illustatd. Thad th thad B though th font hol of ndl ba thad guid b, thn pass it though th ndl hol,. Mak su that th to stands of thad fom th spools do not gt tangld. b m, n Thading fom points z to v is th sam as fo a singl ndl (f to pag 17). Th ndl thad cannot b usd ith th tin ndl. Pss th tin ndl ky and slct th dsid pattn. Pattns not suitabl fo tin ndl sing cannot b slctd (pattn slction kys a gayd out). Buttonhols, spcialty stitchs and monogam cannot b slctd. Tin ndl ky Whn you s pattns ith th tin ndl, tst th stitchs fist bfo you s on th gamnt. Us th zigzag foot A o satin stitch foot F fo tin ndl sing. Us th thads #60 o fin. Whn changing th sing diction, ais th ndl and pss foot thn tun th fabic (foot up fo pivoting option is not availabl hn th tin ndl is slctd). Us th thad cutt on th fac plat hn cutting thads. Aft tin ndl sing is finishd, pss th tin ndl ky and th aning mssag ill appa. Pss th OK ky and plac th tin ndl ith a singl ndl. 65

68 PROGRAMMING A PATTERN COMBINATION Th pattns in th dcoativ stitch catgoy and monogams can b pogammd to mak a pattn combination. Pss th pogam ky and slct as many pattns as you ish to pogam. You can pogam up to 100 pattns in ach combination. Th imags of pogammd pattns a shon on th lft sid of th visual touch scn. Pogam ky t Mio Imag of Pattns To s o pogam th pattn as a mio imag, pss th vtical mio ky o hoizontal mio ky. Slct th dsid pattns to cat th mio imag. Pss th vtical o hoizontal mio ky again to cancl th mio imag function. Vtical mio ky Hoizontal mio ky To vi th nti pattn combination, pss th cuso ky to scoll ov th pattn combination o pss th dit box to sho th nti pattn combination at a glanc. Cuso kys t Edit box Hoizontal mio imag is availabl only fo th spcific pattns. Fo pattn idntification, ths pattns a shadd in light gy on th fnc chat insid th top cov. Mio imag function ill b cancld and mio imag icon ill disappa if th slctd pattn is not suitabl fo th mio imag. Pss foot pssu cannot b adjustd to th stitch pattns of a pattn combination individually. If you attmpt to do so, only th last pattn s pss foot pssu sttings a applid to all th pogammd pattns. Bidg Stitchs Bidg stitchs a usd fo insting staight stitchs aft a stitch pattn. If you ant mo spac btn Fnch knots (D5), fo xampl, inst pattn BR5 aft pattn D5. To counts of staight stitchs a addd to pattn D5. Pattns BR5, BR6 and BR8 ill inhit th stitch lngth and ndl dop position of th pvious pattn in th pattn combination. 66

69 Editing a Pattn Combination Dlting a Pattn Th pattn bfo th cuso o shon in blu is dltd by pssing th dlt ky. Cuso Dlt ky To dlt a pattn in th middl of a combination, pss th cuso ky to slct th pattn you ish to dlt. Th stitch imag of th slctd pattn tuns blu. Pss th dlt ky to dlt th slctd pattn. Cuso ky Slctd pattn Insting a Pattn Pss th cuso ky to slct th pattn nxt to h you ish to inst a pattn. Ent th dsid pattn to inst it bfo th slctd pattn. t Instd pattn t 67

70 Statov Ky This is a 2-ay function ky to stat sing a pattn combination ov fom th bginning. Whn you stop sing a pattn combination, th statov ky is activatd. Cunt pattn statov If you ish to stat sing fom th bginning of th cunt pattn, pss th statov ky onc and stat th machin. Th ky ill chang and sho a tiangl and doubl ba that mans th machin ill stat ov fom th cunt pattn of th combination. Statov ky (cunt pattn of th combination) Cunt pattn Whn you stop sing a pattn combination duing th fist pattn and pss th statov ky, th numb of th ba abov th tiangl ill not chang bcaus th pattn ill b sn fom th fist pattn. Fist pattn statov Th ky shos a tiangl and singl ba that mans th machin ill stat ov fom th fist pattn. If you ish to stat sing fom th bginning of th fist pattn of th combination, pss th statov ky tic and stat th machin. Statov ky (fist pattn of th combination) Fist pattn If auto thad cutting is don, th machin ill statov fom th fist pattn. 68

71 Chcking Pattn Combination Lngth You can chck th total lngth of th pattn combination by pssing on th pattn combination lngth ky indicatd in th manual stting indo. Pss th stting bat to opn th manual stting indo. Stting ba Pattn combination lngth ky Th adout of th total lngth is a thotical valu and th actual lngth may vay dpnding on sing conditions. Fo xampl, slct th pattn P5 th tims, and s a pattn combination. If th actual lngth diffs considably fom th adout, masu th actual lngth and nt th nast valu by pssing th + o ky. In this cas, th thotical valu is 51 mm. Hov, if th actual lngth is 40 mm, nt 40 mm by pssing ky. Pss th OK to gist it. Actual lngth Th adout is adjustd automatically hn calculating th lngth of oth pattn combinations. Th mssag Plas nt th actual lngth of th pattn combination disappas to indicat that th displayd valu is adjustd alady. Fo xampl slct pattns P10, P15 and P5. Th thotical valu is 53 mm. Hov, th ad out is calculatd accoding to th masud actual lngth. In this cas, th adjustd valu is 42 mm. Pss th dfault ky to cla th ntd actual lngth. Dfault ky 69

72 Monogamming You can pogam ltts and symbol dsigns fo monogamming. Pss th Monogam ky and th font slction indo ill opn. You can slct on of 4 fonts*. Slct th dsid font by pssing th cosponding ky. Monogam ky Block font ky Scipt font ky Boaday font ky t Block font (9 mm) ky Th monogam mod indo ill opn. Th hight of Block font (9 mm) is appoximatly 9 mm. * If you slct Russian o Japans languag fo th visual touch scn, you can slct Cyillic alphabts o Japans font as ll. t y u i o!0!1 Function Kys y Cuso ky Pss th cuso ky to mov th cuso up o don. u Edit box Pss th dit box to vi th nti monogam. i Ltt siz ky Pss this ky to slct th full siz (L) o small siz (S). o Ltt cas ky Pss this ky to slct th upp cas o lo cas.!0 Dlt ky Pss this ky to dlt th slctd chaact o symbol.!1 Fil sav ky Pss this ky to sav th monogam as a data fil. Numbs, symbols and Euopan ltts a availabl on pags 2/5 though 5/5. y 70

73 Manual Thad Tnsion This machin is uippd ith automatic thad tnsion contol. Hov, you may nd to manually adjust th tnsion balanc dpnding on th sing conditions. To adjust th thad tnsion, pss th stting ba to sho th option. Individual Thad Tnsion Adjustmnt To apply th thad tnsion adjustmnt to ach ltt individually, slct th ltt by moving th cuso. Pss + o to adjust th thad tnsion of th slctd ltt. Th adjustd thad tnsion is applid to th slctd ltt. Thad tnsion adjustmnt Unifid Thad Tnsion Adjustmnt To apply th thad tnsion adjustmnt to all ltts togth, you do not nd to slct th ltts. Pss th unifid thad tnsion ky. Pss + o to adjust th thad tnsion. Th adjustd thad tnsion is applid to all ntd ltts. Whn unifid thad tnsion contol is applid, th unifid thad tnsion ky tuns to yllo. Pss th unifid thad tnsion ky again to dactivat th unifid thad tnsion adjustmnt. Spacing To nt a spac in monogamming, pss on of th th spac kys on th lo ight con of th monogam slction. Spac kys Small-siz spac Mdium-siz spac Lag-siz spac Rducing th Siz of Ltts To duc th hight of a chaact to appoximatly 2/3 of its oiginal siz, slct th chaact and pss th ltt siz ky. A A 2/3 71

74 Pogamming a Monogam Simply nt th chaacts by pssing th cosponding kys to pogam a monogam. Exampl 1: Quilt in Block font Slct Block font. Ent Q. Pss th ltt cas ky to slct lo cas. Ltt cas ky Ent u, i, l and t. Exampl 2: Café in Scipt font Pss th monogam ky and slct Scipt font. Ent C. Monogam ky Pss th ltt cas ky and slct lo cas ltts. Ent a and f. Pss th pag ky 3 tims to go to th pag 4 of 5. Pss th ltt cas ky. Ent é. Us a blu tip ndl fo sing a monogam. Apply a sht of stabiliz to fin fabics o sttch fabics. Tst s to chck th sing sults. 72

75 Saving a Pattn Combination Th pattn combination and monogam can b savd as a fil in th machin s intnal mmoy o a USB flash div. Th machin has a USB pot fo USB flash div. Pss th sav fil ky aft pogamming a pattn combination, and th sav fil indo ill opn. Sav fil ky Slct th location to h you ish to sav th pattn combination. Th Odf fold is shon. Slct th Odf fold and th fil nam is assignd automatically stating fom M_001...in od. Pss th OK ky to sav th fil und th assignd nam. Fil nam If you ish to assign a uniu nam to th fil, pss th nam ky and th kyboad indo ill opn. Rnam ky Ent a n nam and pss th OK ky to chang th fil nam. Pss th OK ky and th fil is savd und th n nam. Th fils and folds a displayd on diffnt pags. Cating a n fold Slct a location fo a n fold and pss th n fold ky. Th kyboad indo ill opn. Ent a fold nam and pss th OK ky. Th n fold is catd und th assignd nam. N fold ky t y Dlting a fil o fold Pss th dlt ky and slct th fil o fold to dlt. A confimation mssag appas. Pss th OK ky to dlt th fil o fold. t Dlt ky Changing th fold nam o fil nam Pss th nam ky and slct th fold o fil of hich you ish to chang its nam. Th kyboad indo ill opn. Ent th n nam and pss th OK ky. Th nam of th fold o fil ill chang. y Rnam ky 73

76 Opning a Pattn Combination You can opn th pattn combination and monogam savd in th machin s intnal mmoy o a USB flash div. Pss th opn fil ky and th opn fil indo ill opn. Opn fil ky Slct th mmoy location; ith th machin s intnal mmoy o a USB flash div. Th Odf fold ill appa. If you catd any folds bfo, thos folds ill also appa. If you cannot find th dsid fold o th fil in th pag, pss th nxt o pvious pag ky to display th oth pags. Slct th dsid fold and th fil list ill appa. Slct th dsid fil. Th scn ill tun to th odinay sing indo shoing th savd pattn combination o monogam. Pss on of th layout kys to slct th layout of th fil list as shon. 74

77 Sing Application Sing Application Sing application is a uniu fatu that povids you ith 12 usful sing applications. Pss th sing application ky and th sing application mnu ill opn. Th 12 sing applications a as follos: Saming Ovdg Blind Hm & Shll Tuck Rolld Hm t Zipp Sing y Gathing t y u i u Basting i Button Sing o Tacking!0 Appliu!1 Patchok!2 Quilting o!0!1!2 75

78 Saming Th a 4 typs of stitchs fo saming in this goup. Wovn (Saming 1) Staight stitchs fo saming gula ovn fabics. Sttch/Knit (Saming 2) Nao sttch stitchs fo saming sttch o knit fabics. Cuv (Saming 3) Shot staight stitchs fo saming cuvd lin. Topstitching (Saming 4) Long staight stitch fo topstitching ith thick thads. 76

79 Ovdg Wovn Ovcasting stitch fo gula ovn fabics. Sttch/Knit Knit stitch fo finishing a dgs of sttch o knit fabics. Fo btt sults, us th zigzag foot A and s laving an aduat sam alloanc. Aft sing, tim th sam alloanc clos to th stitchs (f to pag 36). Wovn Ovlock stitch simila to a pofssional ovlock stitch. Havy Doubl ovdg stitch fo pvnting a dgs of linns and gabadins fom avlling. 77

80 Blind Hm Slct Blind Hm. Th folloing 2 options a availabl. Wovn Fo blind hmming gula ovn fabic Sttch/Knit Fo blind hmming sttch o knit fabic. (A) (B) To s: Attach th blind hm foot G. Fold th fabic to fom a hm laving a 0.5 cm (1/4 ) alloanc as shon. 0.5 cm (1/4 ) (A) Mdium to havy fabics: Th a dg should b ovcastd. (B) Fin fabics: Fold th a dg 1 cm (1/2 ). 1 cm (1/2 ) y t Position th fabic so that th fold coms to th lft sid of th guid on th foot. Lo th pss foot. Th ndl should just pic th foldd dg hn it coms ov to th lft sid. Adjust th position of th ndl dop if ncssay. S guiding th fold along th guid. t Fold y Guid Aft sing is finishd, opn th fabic flat. Th sam on th ight sid of th fabic is almost invisibl. i u Adjusting th ndl dop position Pss th stting ba to xpand th manual stting indo. Pss th + ky u in th upp o to mov th ndl dop positions to th lft. Pss th ky i in th upp o to mov th ndl dop positions to th ight. Th ndl dop position ill chang, hil th stitch idth (2.8 mm) mains consistnt. Th distanc btn th lft ndl dop position and guid of th foot is indicatd in millimts. You can alt th stitch idth by changing th ight ndl dop position. 2.8 mm 78

81 Alting blind hm stitch idth Pss th + ky in th o to incas th stitch idth. Pss th ky in th o to dcas th stitch idth. You can mov th lft ndl dop position ith th + o ky in th o. Shll Tuck Slct Shll Tuck. Th folloing 3 options a availabl. Small Nao shll tuck stitch Mdium Mdium idth shll tuck stitch Lag Rgula shll tuck stitch To s: Us a light ight fabic (Ticot, fo xampl). Fold th fabic in bias as shon and stitch on th fold. Allo th ndl to baly cla th foldd dg to cat a shlld dg. If you s shll tucks, spac th os at last 1.5 cm (5/8 ) apat. 79

82 Rolld Hm Staight Stitch Rolld hmming ith staight stitch Zigzag Stitch Rolld hmming ith nao zigzag stitch 4 mm & 6 mm Rolld hmming using optional olld hmming ft D1 and D2 0.3 cm (1/8 ) 5 cm (2 ) To s: Attach th olld hm foot D. Fold th fabic dg tic to fom a hm, 0.3 cm (1/8 ) id and 5 cm (2 ) long thn pss. Plac th fabic aligning th hm dg ith th guid of th foot. Tun th hand hl to lo th ndl to th stating point. Lo th foot and s sval stitchs sloly hil pulling on th thads to assist fding th fabic. Stop th machin and lo th ndl into th fabic. Rais th foot and inst th foldd potion of th fabic into th cul of th foot. Lo th foot and s hil lifting th dg of th fabic to kp it fding into th cul smoothly and vnly. 0.6 cm (1/4 ) Tim th cons 0.6 cm (1/4 ) to duc bulk. 0.6 cm (1/4 ) 80

83 Zipp Sing Lappd zipp Lappd zipp application ith th zipp foot E Concald zipp Concald zipp application ith th optional concald zipp foot Z Lappd zipp sing Pss th lappd zipp icon and th zipp sing indo ill opn. Pss th sing stp icon and th machin stting ill automatically adjust to suit ach sing stp. Fabic ppaation Add 1 cm (3/8 ) to th zipp siz. This is th ovall opning siz. Mak th nd of opning. Zipp siz Opning siz 1 cm (3/8 ) End of opning Attach th zigzag foot A. Lock-a-Matic Basting Lock-a-Matic Plac th ight sids of th fabic togth and s to th nd of th opning laving a 2 cm (3/4 ) alloanc. t 2 cm (3/4 ) Basting Bast th zipp opning. t 81

84 S lft sid Attach th zipp foot E. Fold back th lft sam alloanc. Tun th ight sam alloanc und to fom a 0.2 to 0.3 cm (1/8 ) fold. Plac th zipp tth nxt to th fold and pin in plac cm (1/8 ) Zipp tth Fold Opning siz Lo th foot onto th topsid at th bottom of th zipp so that th ndl pics th fabic nxt to th fold and th zipp tap. S along th zipp guiding th zipp tth along th bottom dg of th foot. S though all lays nxt to th fold. Stop 5 cm (2 ) bfo zipp foot E achs th slid on th zipp tap. 5 cm (2 ) Rais th foot and opn th zipp. Lo th foot and stitch th maind of th sam. Clos th zipp and spad th fabic opn flat ith th ight sid of th fabic facing up. 82

85 Basting Rplac th foot ith th zigzag foot A. Bast th opnd fabic and zipp tap togth. Basting 1 cm (3/8 ) S ight sid Rplac th foot ith th zipp foot E. Backstitch acoss th nd of opning to 1 cm (3/8 ). Stitch though th gamnt and zipp tap, guiding th zipp tth along th bottom dg on th foot. Stop about 5 cm (2 ) fom th top of th zipp. Lo th ndl into th fabic, ais th foot and mov th basting stitchs. Basting stitchs Opn th zipp and mov th slid to th a of th foot. Lo th foot and stitch th maind of th sam making su th fold is vn. Rmov th basting stitchs. 83

86 Concald Zipp Sing (optional) Pss th concald zipp icon and th indo ill sho th stp-by-stp icon kys. Ppa a concald zipp 2 cm (3/4 ) long than th opning siz. Pss th sing stp icon and machin sttings ill automatically adjust to suit ach sing stp. Basting t Lock-a-Matic Attach th zigzag foot A. Plac th ight sids of th fabic togth and s to th nd of th opning ith a 2 cm (3/4 ) sam alloanc. Pss th vs button to lock th sams. End of opning 2 cm (3/4 ) Zipp siz Opning siz i Lock-a-Matic u y Basting Bast th opning 0.3 cm (1/8 ) insid of th sam lin. t 0.3 cm (1/8 ) Plac th ight zipp tth nxt to th fold and pin it in plac. Fold up th lft sam alloanc to th bodic. Opn th zipp and put it on th ight sam alloanc ith th back sid up. y Zipp tth u Fold i Lft sam alloanc o!0 Right of tth Attach th concald zipp foot Z. Rais th zipp tth on th ight and lo th foot so th lft goov of th foot catchs th zipp tth. Stitch though th zipp tap and fabic up to th nd of th opning. Rvs th stitchs to scu th sam. o Lft goov!0 Zipp tap 84

87 Stitching tap Rais th foot and clos th zipp. Rplac th foot ith th zipp foot E. Tun and fold th bodic to th ight. Sam along th dg of th lft zipp tap and vs th stitchs 2 cm (3/4 ) bfo th zipp bottom. 2 cm (3/4 ) 2 cm (3/4 ) Stitching tap Tun and fold th bodic to th lft. Sam along th dg of th ight zipp tap and vs th stitchs 2 cm (3/4 ) bfo th zipp bottom. Lft of tth Rais th foot and plac it ith th concald zipp foot Z. Rmov th basting stitchs. Opn zipp and inst th pull tab btn fabic and zipp tap to allo th slid to ach th stopp. Pull tab 0.3 cm Rais th zipp tth on th lft and lo th foot so th ight goov of th foot catchs th zipp tth. Stitch though th zipp tap and fabic up to th nd of th opning. Rvs th stitchs to scu th sam. Zipp tth Goov Slid up th stopp to 0.3 cm (1/8 ) blo th nd of th opning and fastn th stopp ith plis. Stopp 85

88 Gathing In addition to th gula gathing stitch, this sction offs you a spcial stitch fo asing slv tops. Easing a slv top Pull both of th thads about 10 cm (4 ). S a pai of lins, 3 mm (1/8 ) apat, along th dg of th slv top. Pull th bobbin thads to contact th slv top cafully, matching it ith th amhol siz. Mak su not to mak gaths in th slv top. Basting Th a 2 basting stitchs availabl in this sction. Basting (Auto) This stitch is usd fo basting zipp tap o fitting of gamnts. S in th sam ay as that fo staight stitch sing. Basting (Manual/Quilting) Attach th daning foot PD-H. Lo th fd dog. Rf to pag 23 fo ho to attach th daning foot PD-H. To s Hold th fabic taut and dpss th foot contol. Th machin ill mak on stitch and stop automatically. Slid th fabic to th a fo th nxt stitch. 86

89 Button Sing Whn attaching a button to thick fabic, you nd to mak a shank by using th button shank plat. Slct Shank Lo th fd dog. Attaching th button sing foot T Mak su to pss th lockout ky to lock th machin. Inst th a pin of th foot into th a goov of th foot hold. Ra pin Ra goov Gntly lo th pss foot lift hil holding th foot ith you fing to fit th foot. Pss th lockout ky to unlock th machin. Plac a button on th fabic and lo th ndl into th lft hol of th button by tuning th handhl ith you hand. Inst th button shank plat und th button. Lo th foot to hold th button in plac, aligning th diction of th button. Button shank plat Rais th ndl by tuning th handhl until th ndl ba sings to th ight. Pss th + o ky so th ndl nts into th ight hol of th button. Th maximum stitch idth is 0.7 cm (1/4 ). Stat sing and continu until th machin stops automatically. Rmov th fabic fom th machin. t Cut th all thads laving at last 10 cm (4 ) tails. Tim th thad at th bginning clos to th fabic. Pass th ndl thad at th nd of stitching though th lft hol in th button, btn th button and fabic. Pull th ndl thad to bing th bobbin thad up to th ight sid of th fabic. Ndl thad at th nd t Bobbin thad Wind th thads to fom a shank and knot thm togth. Th button shank plat cannot b usd if th button is too thick. 87

90 Tacking Tacking is usd to infoc pockts, cotchs and blt cais h xta stngth is ndd. Th a 3 auto tacking sizs and manual tacking availabl. Attach th satin stitch foot F. Auto tacking Lo th ndl at th stating point and stat sing. Th machin ill s th tack of th slctd siz and stop automatically hn it is finishd. Stating point Manual tacking Stat th machin and s to th uid lngth, thn pss th vs button. This sts th tack lngth. Continu sing until th machin stops automatically. Ruid lngth Th maximum lngth of tacking is 1.5 cm (5/8 ). To s th sam siz tack To s anoth tack in th sam siz, simply stat th machin and s until th machin stops automatically. To s th nxt tack in a diffnt siz, pss th X ky. 88

91 Appliu Th a 6 typs of appliu stitchs availabl in this sction. You can slct th ndl stop position ith up o don by pssing th ndl stop position ky. Ndl stop position ky Th ltt abov th stitch imag dnots th baslin of th ndl dop position. M: Middl (cnt) R: Right Th baslin can b adjustd ithout changing th stitch idth by pssing th + o ky on th bottom o. M R Pivoting at appliu cons Whn sing an appliu ith shap cons, you may tun on th Foot up fo pivoting option so that th pss foot automatically gos up hn th machin stops. Pss th foot-up ky to tun on this option Foot-up ky Mak su to stop th machin ith th ndl doppd at th out dg of th appliu. Stating ov fom th con Pss th statov ky bfo sing in th n diction to s fom th bginning of th pattn. Statov ky To options of statov a availabl fo appliu stitchs. Pss th coning ky to slct nomal statov o coning statov. Th ky icon ill chang to sho hich option is bing slctd hn pssing th ky. Coning ky Nomal statov: S a locking stitch thn stat sing fom th bginning of th pattn. Coning statov: Stat sing fom th bginning of th pattn ithout a locking stitch. 89

92 Patchok Patchok picing Th a 3 stitchs fo saming patchok pics in this sction. Th dfault stitch lngth is st at 1.8 mm, idal fo patchok picing, but you can fin tun th stitch lngth by pssing th + o ky. Attach 1/4 sam foot O, hich hlps you to kp a constant 1/4 (6 mm) sam alloanc. Put 2 pics of fabic ith ight sids togth. Plac th patchok pics und th foot so that th dg of th fabic matchs th guid on th pss foot. Edgs of fabic Guid on th 1/4 sam foot O Whn you stop th machin, a mssag ill appa. Pss th OK ky and th machin mmoizs th sam lngth to s anoth pic of th sam lngth. Pss th X ky to s in a diffnt siz. Aft sing th mmoizd lngth, a mssag ill appa. To s th sam lngth, stat th machin and it ill stop automatically aft sing th mmoizd lngth. 90

93 Quilting In this sction, 6 typs of usful stitchs fo uilting a availabl. Staight stitchs (ith dual fd) Clasp stitchs F motion uilting stitchs Sculptu stitchs (ith dual fd) t Hand-look uilt stitchs y Vaiabl zigzag stitchs t y Staight Stitchs (ith dual fd) Staight stitchs in this sction a suitabl fo saming uilt lays using th dual fd foot (f to pag 23 fo ho to attach it). Plas ft to pag 62 if you ish to us zigzag foot A. Quilting guid ba fo dual fd foot Th uilting guid ba is hlpful hn sing paalll, vnly spacd os of stitching. Inst th uilting guid ba into th hol in th a of th foot hold. Shift th uilting guid ba to th dsid spacing. Quilting guid ba Hol S os of stitching hil tacing th pvious o of stitchs ith th uilting guid ba. Clasp Stitchs You can clos uilt lays and batting using th clasp stitch. Us th satin stitch foot F. Th machin ss on unit of th pattn and automatically stops ith th ndl in up position hn compltd. 91

94 F Quilting Fo odinay and bulky uilts, slct Staight Stitch 1 o Zigzag Stitch 1, and us th daning foot PD-H (f to pag 23 fo ho to attach th daning foot). Slct th Staight Stitch 2 o Zigzag Stitch 2 fo flatt uilts and us th f uilting foot QC, QO o QV. Rf to pag 87 (button sing foot) fo ho to attach th f uilt ft. On Stitch Off Th machin stops automatically aft sing on stitch so that you can bing th bobbin thad up to pvnt it fom bunching up on th ong sid of th fabic. Hold th ndl thad and s on stitch and th machin stops automatically. Pull th ndl thad up to bing th bobbin thad up. Hold both th ndl and bobbin thads and s sval stitchs to scu th thads. You can tim th thad tails ith scissos. Th machin ill stitch continuously hn you sum sing. If you ish to stat sing ithout on stitch off, pss th on stitch off ky to cancl this function. Th ky icon changs to. Whn on stitch off is activ, th ky icon shos. On stitch off ky To s S at mdium spd hil guiding th fabic ith you hands. Mov th uilt 3 mm o lss p stitch. Foot Hight fo F Motion Quilting Whn Staight stitch 2 o Zigzag stitch 2 is slctd, th hight of don position of th f motion uilting ft (QC, QO, QV) is optimizd automatically. Hov, you can fin tun th foot hight accoding to th uilt thicknss. Plac th fabic und th foot and lo th foot. Pss th foot hight ky and th adjusting indo opns. Adjust th foot hight by pssing th + ky o ky and pss th OK ky to gist th stting. Foot hight ky Rduc th hight if th fabics bounc hn sing. Incas th hight if th foot gts tappd in th fabics hn sing. Pupl tip ndl is commndd fo f motion uilting to pvnt skippd stitch. Do not mov th uilt lays toad you hn th opn-to foot is attachd. Sculptu Stitchs Ths stitchs a usd to accntuat dsign outlins and to cat a mock hand-uilt. 92

95 Hand-look Quilt Stitchs Us a tanspant nylon thad fo th ndl and odinay sing thad fo th bobbin. Th bobbin thad is pulld up on th ight sid of th fabic and th stitchs ill look as if sn by hand. Vaiabl Zigzag This uniu fatu allos you to contol zigzag idth ith th kn lift. -M -L -M -L Slct -M o -L, using th daning foot PD-H fo sing uilt lays. Dop th fd dog. Guid th fabic ith you hands hil sing. Slct -M o -L, using th cla vi f uilt foot QV fo sing flat and fim fabics. Dop th fd dog. Guid th fabic ith you hands hil sing. Slct -M o -L, using th satin stitch foot fo sing vaiabl zigzag stitchs. Th fabic is fd by th fd dog and th stitch idth can b vaid ith th kn lift. -M -L Attach a stabiliz to th ong sid of th fabic if ndd. S at slo to mdium spd hil guiding th fabic ith you hands and contolling th stitch idth ith you kn. Whn th machin stops, you can ais and lo th pss foot ith th kn lift. Pupl tip ndl is commndd fo f motion uilting to pvnt skippd stitch. t Maximum Zigzag Width Adjustmnt Th maximum zigzag idth can b limitd to suit you sing nds. Pss th + o ky bsid th maximum zigzag idth stting to limit th maximum zigzag idth to you pfnc. Fo th vaiabl zigzag stitchs ith th satin stitch foot, pss th stting ba t to opn th maximum zigzag idth stting. Maximum zigzag idth stting t Stting ba 93

96 CUSTOMIZING MACHINE SETTINGS Machin Stting Mod Pss th st mod ky to nt th machin stting mod. You can slct vaious options and customiz th machin sttings to suit you psonal pfnc. St mod ky Pss on of th 3 kys to slct th mod to customiz. Common stting mod ky Pss th common stting mod ky to nt th common stting mod. In this mod, you can customiz th gnal machin sttings and options. Odinay sing stting mod ky Pss th odinay stting mod ky to nt th odinay stting mod. In this mod, you can customiz th machin sttings and options fo odinay sing (f to pags fo th opation). Languag slction mod ky Pss th languag slction mod ky to nt th languag slction mod. In this mod, you can slct th dsid languag fo th scn mssags. To bos pags in ach mod, pss th nxt pag ky o pvious pag ly t Nxt pag ky y Pvious pag ky y t Rgisting th custom sttings Aft customizing th sttings, pss th OK ky to nabl th n sttings. To cancl th changs to th sttings, pss th X ky and th stting mod indo ill clos. Common Stting Mod Scn Contast You can adjust th contast of th visual touch scn by pssing th + o ky. Sound Volum Th signal sound can b adjustd by pssing th + o ky. St th valu to 0 by pssing th ky sval tims to mut th signal sounds. Inch/mm Option You can st you machin s dimnsional unit to ith inchs o millimts by pssing th inch o mm icon ky. Th dfault unit is millimts. Pss th nxt pag ky to sho th nxt mnu. 94

97 Touch Scn Calibation You can calibat th ky positions of th touch scn if you fl th touch scn ky is not sponding poply. Pss th Ys ky to opn th calibation indo. Pss th + sign ith th touch panl stylus as th sign appas. Whn you pss th last sign, th scn shos END and th calibation indo ill clos. t y t Fomatting th mmoy If th intnal mmoy of th machin o USB flash div dos not function du to damag to th mmoy bank, you nd to -nabl it by fomatting th mmoy. To fomat th machin s intnal mmoy, pss th machin icon ky and a confimation mssag ill appa. Pss th OK ky to fomat. To fomat a USB flash div, pss th USB icon and th confimation indo ill opn. Pss th OK ky to fomat. CAUTION: Do not tun off th po o disconnct th USB flash div hil a aning mssag is displayd othis it may damag th mmoy bank. y Standby Tim Th sing lights ill tun off and th machin ill nt standby mod if you do not us th machin ithin th tim piod st by this tim. Doing any opation ill tun th lights and scn on again. Th standby tim can b st fom 1 to 30 minuts. If you ish to tun off th tim, pss and hold th + ky until OFF shos in th tim indo. Pss th nxt pag ky to sho th nxt mnu. 95

98 u u Upp Thad Snso If you nd to un th machin ithout thads, tun off th upp thad snso. i i Sing Light Th sing lights can b tund on o off individually. Pss th cosponding light kys to tun on o off th sing lights. o o Quit Mod If you pf th machin to un mo uitly, tun on this option so th signal sound and stat-up sing spd ill b st at th lost lvls. Th uit mod stting ovuls any pvious sttings fo ths paamts. Pss th nxt pag ky to sho th nxt mnu.!0 Th uit sign!0 ill appa on th ight upp con of th scn, sound volum on th common sttings, and th adjustabl stat-up spd on th odinay sing sttings hn th uit mod option is on. 96

99 !1 Backgound Colo You can slct fom th coloful allpaps fo th backgound of th visual touch scn by pssing th lvant icon.!1!2!2 Rst All to Dfaults Pss th Ys ky to st all th paamts to th oiginal valus (factoy sttings). Pss th OK ky to gist th n sttings. Odinay Sing Stting Mod Auto thad tnsion You can adjust th auto thad tnsion lvl by pssing th + o ky. Lo bobbin thad aning You can adjust th lo bobbin thad aning lvl by pssing th + o ky. To tun off th lo bobbin thad aning, pss th ky until OFF shos in th indo. Ndl stop position Th machin alays stops ith th ndl in th don position xcpt hn sing buttonhols, spcialty stitchs, monogams, tc. Hov you can chang th ndl stop position to up by pssing th ndl up ky. Th machin stops ith th ndl in th don position if Foot-up ky option is tund on, vn if th ndl stop position is st to up position. Pss th nxt pag ky to sho th nxt mnu. 97

100 Adjustabl Stat-Up Spd Th machin ill stat unning sloly and th sing spd ill gadually incas to maximum. You can slct th dsid stat-up spd fom slo, nomal o high by pssing th cosponding ky, and st th spd fo th stat/stop button o foot contol individually. Pss th nxt pag ky to sho th nxt mnu. t Foot hight fo pivoting Whn th foot up option is tund on, th pss foot ill automatically go up hn th machin stops. Th hight of th foot in th up position can b adjustd by pssing th + ky o ky in accodanc ith thicknss of th fabics. t y u y Foot pssu Th foot pssu is automatically optimizd but you can adjust th foot pssu manually by pssing th + ky o ky. u Vaiabl zigzag snsitivity You can adjust th amount of ndl sing against th kn lift movmnt fo vaiabl zigzag in sing applications. Pss th ky so th ndl sings a small amount hn moving th kn lift. Pss th + ky so th ndl sings a lag amount hn moving th kn lift. Pss th nxt pag ky to sho th nxt mnu. 98

101 i Thad Cut aft Auto-Lock Th machin automatically tims th thads aft sing locking stitchs hn this option is tund on. i o Favoit Stitch Adjustmnt If you ish to sav th changs to manual stitch sttings, tun on this option by pssing th ON ky. If this option if tund off, th manual stitch stting ill b clad hn tun th po sitch off. Pss th dlt icon!1 to cla th manual stitch stting. o This option is availabl fo all stitchs in odinay sing mod xcpt monogam.!1!0!0 Rsum Mod Tun on this option hn you ish to sum th last pattn sn bfo tuning th po sitch off. Whn th po is tund on again, th confimation mssag ill appa. Pss th OK ky to sum th last pattn. Rsum data ill b clad und th folloing conditions: Catd stitch is impotd ith th impot ky. Catd stitch is dltd ith th dlt ky. Th intnal mmoy is fomattd. Aft customizing th sttings, pss th OK ky to nabl th n sttings. 99

102 Languag Slction Mod Slct th dsid languag and pss th OK ky. Th visual touch scn shos mssags in th slctd languag. + Cocting Distotd Stitch Pattns Th sing sults of th stitch pattns may vay dpnding upon sing conditions, such as sing spd, typ of th fabic, numb of lays tc. Alays tst s on a scap pic of th fabic that you ish to us. If dcoativ stitch pattns, monogam o th sttch buttonhol is distotd, coct it ith th fd balancing dial. St th fd balancing dial at th nutal position fo nomal sing. Fd balancing dial Nutal position Rtun th fd balancing dial to its nutal position hn th sing is finishd. + + Sttch stitch pattn (Q24) If th pattn is compssd, tun th fd balancing dial in th diction of +. If th pattn is dan out, tun th fd balancing dial in th diction of. Ltts and numbs If th pattn is compssd, tun th fd balancing dial in th diction of +. If th pattn is dan out, tun th fd balancing dial in th diction of. 100 Stitch balanc of th sttch buttonhols (B8) If th ight o is dns, tun th dial in th diction of +. If th lft o is dns, tun th dial in th diction of.

103 CARE AND MAINTENANCE z WARNING: Tun th po sitch off and unplug th machin bfo claning. Do not dismantl th machin in any ay oth than as xplaind in this sction. CAUTION: Do not sto th machin in a high-humidity aa, na a hat adiato, o in dict sunlight. Sto th machin in cool dy plac. Clan th outsid of th machin ith a soft cloth. Do not us chmical solvnts. x Claning th Hook Aa Clan th hook aa at last onc a month. z Tun th po sitch off and unplug th machin. Rmov th ndl plat (f to pag 24). Rmov th ndl and pss foot. Tak out th bobbin and bobbin hold. Bobbin hold c x Clan th bobbin hold ith a lint bush. Wip th bobbin hold both insid and outsid ith a soft cloth. Lint bush Soft cloth v t y c Clan th fd dog and auto thad cutt dvic ith th lint bush. Fd dog t Auto thad cutt dvic v Clan th hook ac ith a soft cloth. y Soft cloth b b Inst th bobbin hold so that th knob fits nxt to th stopp in th hook ac. Inst th bobbin. Attach th ndl plat, pss foot and ndl. u Knob i Stopp u i 101

104 Poblms and Waning Signals If a buzz sounds and th visual touch scn shos a aning sign, follo th guidanc blo. Waning Sign Caus Ty this Th stat/stop button is pssd ith th foot contol Disconnct th foot contol. connctd. Th foot contol is out of od. Contact th svic cnt o th sto fom hom th machin as puchasd. Th bobbin ind spindl is shiftd to th ight. Shift th bobbin ind spindl to th lft fo stitching. Th machin ill stop if th buttonhol is sn ithout loing th buttonhol lv. Lo th buttonhol lv and stat th machin again. Th tin ndl ky is pssd hn th tin ndl sign is indicatd on th LCD scn. Rplac th tin ndl ith a singl ndl and pss th OK ky. Th machin is statd ithout loing th fd dog ith button sing slctd. Lo th fd dog. Th machin is statd ith th fd dog lod. Rais th fd dog unlss you ant to s ith th fd dog lod. Th ndl plat is movd. Attach th ndl plat. Chck if th ndl platd is attachd poply. Th machin is halting du to ovload. Wait fo at last 15 sconds to stat. Rmov tangld thads aound tak-up lv, hook ac and automatic thad cutting mchanism. 102