Janome Sewist 525s Instruction Manual. Model 525S. Sewest 525s Owners Manual/ User Guide

Transcription

1 Janom Sis 525s Insucion Manual Janom Sing Machin Janom Sis525S Insucion Manual Modl 525S Ss 525s Ons Manual/ Us Guid

2 Janom Sis 525s Insucion Manual Janom Sing Machin IMPORTANT SAFETY INSTRUCTIONS Whn using an lcical applianc, basic safy pcauions should alays b follod, including h folloings: Rad all insucions bfo using his applianc. DANGER To duc h isk of lcic shock: 1. An applianc should nv b lf unandd hn pluggd in. Alays unplug his sing machin fom h lcic oul immdialy af using and bfo claning. 2. Alays unplug bfo placing a sing machin bulb. Rplac bulb ih sam yp ad 15 Was. WARNING To duc h isk of buns, fi, lcic shock, o injuy o psons: 1. Do no allo childn o play ih h machin. Th machin is no inndd fo us by childn o infimd psons ihou pop supvision. Do no allo o b usd as a oy. Clos anion is ncssay hn his sing machin is usd by o na childn. 2. Us his applianc only fo is inndd us as dscibd in his on s manual. Us only aachmns commndd by h manufacu as conaind in his on s manual. 3. Nv opa his sing machin if i has a damagd cod o plug, if i is no oking poply, if i has bn doppd o damagd, o doppd ino a. Run his sing machin o h nas auhoizd dal o svic cn fo xaminaion, pai, lcical o mchanical adjusmn. 4. Nv opa h applianc ih any ai opning blockd. Kp vnilaion opnings of his sing machin and foo conoll f fom accumulaion of lin, dus and loos cloh. 5. Nv dop o ins any objc ino any opning. 6. Do no us oudoos. 7. Do no opa h aosol (spay) poducs a bing usd o h oxygn is bing adminisd. 8. To disconnc, un all conols o h off ( O ) posiion, hn mov plug fom oul. 9. Do no unplug by pulling on cod. To unplug, gasp h plug, no h cod. 10. Kp fings aay fom all moving pas. Spcial ca is uid aound h sing machin ndl. 11. Alays us h pop ndl pla. Th ong pla can caus h ndl o bak. 12. Do no us bn ndls. 13. Do no pull o push fabic hil siching. I may dflc h ndl causing i o bak. 14. Sich his sing machin off ( O ) hn making any adjusmn in h ndl aa, such as hading h ndl, changing h ndl, hading h bobbin o changing h pss foo, and h lik. 15. Alays unplug his sing machin fom h lcical oul hn moving covs, lubicaing, o hn making any oh adjusmns mniond in his on s manual. SAVE THESE INSTRUCTIONS Th dsign and spcificaions a subjc o chang ihou a pio noic. Ss 525s Ons Manual/ Us Guid

3 Janom Sis 525s Insucion Manual SECTION 1. KNOW YOUR MACHINE Nams of Pas... 2 Sandad Accssois... 3 Accssoy soag... 3 Exnsion Tabl... 4 F-am sing... 4 SECTION 2. GETTING READY TO SEW Conncing h Po Supply... 5 Conolling h Sing Spd... 5 Rvs Sich Lv... 6 Foo Pssu Dial... 6 Dopping h Fd Dog... 6 Raising and Loing h Pss Foo... 7 Changing h Pss Foo... 7 Rmoving and Aaching h Foo Hold... 7 Changing Ndls... 8 Ndl and Thad Cha... 8 Winding h Bobbin... 9 Sing h spool... 9 Rmoving h bobbin... 9 Winding h bobbin Insing h bobbin Thading h Machin Ndl had Daing up h Bobbin Thad Slcing h Sich Pan Pan slco dial Sich Lngh Dial Adjusing sch sich balanc Sich Widh Dial Vaiabl ndl posiion Balancing Ndl Thad Tnsion SETION 3. BASIC SEWING Saigh Sich Sing Changing h sing dicion Finishing sing Sam guids on h ndl pla Tuning a sua con TABLE OF CONTENTS Janom Sing Machin SECTION 4. UTILITY STITCHES Basic Zigzag Ovcasing Kni Sich Tico Sich (Mulipl Zigzag Sich) Saigh Sch Sich Zigzag Sch Sich Buon Sing Auomaic Buonhol Adjusing h buonhol sich dnsiy Codd Buonhol Manual Buonhol Zipp Applicaion Blind Hmming SECTION 5. DECORATIVE STITCHES Dcoaiv Sain Sichs Dcoaiv Sch Sichs Smocking Quiling Pin Tucking Shll Tucking Fagoing Pachok Appliué SECTION 6. CARE AND MAINTENANCE Claning h Hook Rac and Fd Dogs Rplacing h Bobbin Hold Rplacing h Ligh Bulb Toublshooing Ss 525s Ons Manual/ Us Guid

4 Janom Sis 525s Insucion Manual Janom Sing Machin SECTION 1. KNOW YOUR MACHINE u i #0 #3 #2 #1 Nams of Pas Bobbin ind sopp Bobbin ind spindl Hol fo addiional spool pin Spool hold Spool pin y Bobbin ind had guid u Thad ak-up lv i Foo pssu dial o Fac pla!0 Thad cu!1 Ndl had!2 Ndl pla!3 Exnsion abl (Accssoy soag)!4 Hook cov pla!5 Hook cov pla las buon!6 Thad nsion dial!7 Rvs sich lv!8 Sich lngh dial!9 Pan slco Sich idh Pss Ndl clamp Foo Caying Po Machin sock #0 Dop fd lv #1 F-am #2 Buonhol lv #33 Foo lif 2 Ss 525s Ons Manual/ Us Guid

5 Janom Sis 525s Insucion Manual Janom Sing Machin u o!0 y i!1!2!3!4!5 Sandad Accssois Ovdg foo C Zipp foo E Blind hmming foo G Buonhol foo B Auomaic buonhol foo R y Ndls u Bobbins i Scdiv o Lin bush!0 Sam ipp (buonhol opn)!1 Quiling guid!2 Spool hold (lag)!3 Spool hold (small)!4 Addiional spool pin!5 Fl cushion Accssoy soag Th sandad accssois can b sod in h accssoy soag box und h xnsion abl. Da ou h soag box fom h abl as shon. Accssoy soag box 3 Ss 525s Ons Manual/ Us Guid

6 Janom Sis 525s Insucion Manual Janom Sing Machin Exnsion Tabl To dach: Pull h xnsion abl o h lf. To aach: Ins h pin ino h hol and push h xnsion abl o snap i in plac. Pin Hol F-am sing F-am sing is usd fo siching slvs, aisbands, pan lgs o any oh ubula gamns. I is also usful fo daning socks o mnding kns o lbos. 4 Ss 525s Ons Manual/ Us Guid

7 Janom Sis 525s Insucion Manual Janom Sing Machin SECTION 2. GETTING READY TO SEW Conncing h Po Supply z Tun h po sich off. x Ins h machin plug ino h machin sock. c Ins h po supply plug ino h all oul. v Tun h po sich on. Po sich Machin plug Machin sock Po supply plug Wall oul NOTE: Bfo conncing o h po supply, mak su h volag shon on h machin confoms o you lcical po. WARNING: Whil in opaion, alays kp you ys on h sing aa, and do no ouch any moving pas such as h had ak-up lv, handhl o ndl. Alays un off h po sich and unplug fom h po supply: - hn laving h machin unandd. - hn aaching o moving pas. - hn claning h machin. Do no plac anyhing on h foo conol, ohis h machin ill un inminly. Conolling h Sing Spd Foo conol Sing spd can b vaid by h foo conol. Th had you dpss h foo conol, h fas h machin uns. Opaing Insucions: Th symbol "O" of a sich indicas h "off" posiion of a sich. Fo an applianc ih a polaizd plug (on blad id han h oh): To duc h isk of lcical shock, his plug is inndd o fi in a polaizd oul only on ay. If i dos no fi fully in h oul, vs h plug. If i sill dos no fi, conac a ualifid lcician o insall h pop oul. Do no modify h plug in any ay. Th foo conoll Modl YC-482J o TJC-150 is usd ih h sing machin Modl 525S (USA mak only). 5 Ss 525s Ons Manual/ Us Guid

8 Janom Sis 525s Insucion Manual Janom Sing Machin Rvs Sich Lv Push h vs sich lv don o s in vs. Th machin ill s in vs hil h lv is pushd. Foo Pssu Dial Tun h foo pssu dial o adjus h foo pssu. Th foo pssu dial should b s a 3 fo gula sing. Rduc h pssu o 2 fo appliué, cuok, da ok and basing. S h sing mak a 1 hn sing chiffon, lac, ogandy and oh fin fabics. Sing mak Dopping h Fd Dog Th dop fd lv is locad undnah h f-am bd on h backsid of h machin. To dop h fd dog, push h lv in h dicion of h ao, as illusad. To ais h fd dog, push h lv in h dicion of h ao, as illusad, and un h handhl oad you. Th fd dog mus b up fo gula sing. Dop fd lv Raisd posiion Lod posiion 6 Ss 525s Ons Manual/ Us Guid

9 Janom Sis 525s Insucion Manual Janom Sing Machin Raising and Loing h Pss Foo Th pss foo lif aiss and los h pss foo. You can ais h foo abou 1/4" (0.6 cm) high han h nomal up posiion fo asy moval of h pss foo, o o hlp you plac havy fabic und h foo. Lod posiion Nomal up posiion Exa up posiion Changing h Pss Foo To mov: Rais h ndl o is highs posiion by uning h handhl counclockis. Rais h pss foo, and pss h lv on h back of h foo hold. Lv CAUTION: Tun OFF h po sich bfo changing h foo. Alays us h pop foo fo h slcd pan. Th ong foo can caus h ndl o bak. Do no push h lv don o pvn i fom bing bokn. To aach: Plac h dsid pss foo, so ha h pin on h foo lis jus und h goov on h foo hold. Lo h pss foo lif o lock h foo in plac. Goov Pin Rmoving and Aaching h Foo Hold WARNING: Tun OFF h po sich bfo daching o aaching h foo hold. To mov: Rmov h ssc by uning i counclockis ih a scdiv and mov h foo hold. To aach: Mach h hol in h foo hold ih h hadd hol in h pss ba. Fi h ssc ino h hol. Tighn h sc by uning i clockis ih a scdiv. Ssc Foo hold Hol Thadd hol 7 Ss 525s Ons Manual/ Us Guid

10 Janom Sis 525s Insucion Manual Janom Sing Machin Changing Ndls CAUTION: Alays mak su o un h po sich off and disconnc h machin fom po supply bfo changing h ndl. Ndl and Thad Cha WEIGHT FABRIC Vy Ligh Ligh Mdium Chiffon, Gog, Fin Lac, Ogandy N, Tull Bais, Voil, Lan, Pu Silk, Cp d Chin, Sh Cp, Chambay, Handkchif Linn, Gingham, Challis, Pcal, Wool Cp, Pau d Soi, Taffa, Sain, Silk Suah, Sain-backd Cp, Qiana Singl Knis, Jsy, Sima, and Tico Lah, Sud Flannl, Vlou, Vlv, Muslin, Vlvn, Poplin, Coduoy, Boadcloh, Linn, Chinz, Gabadin, Fl, Ty, Bulap, Quild Fabics Rais h ndl by uning h handhl and lo h pss foo. Tun off h po sich. z Loosn h ndl clamp sc by uning i counclockis. Rmov h ndl fom h clamp. Ndl clamp sc x Ins a n ndl ino h ndl clamp ih h fla sid of h ndl o h a. Whn insing h ndl ino h ndl clamp, push i up agains h sopp pin and ighn h ndl clamp sc fimly. Sopp pin Fla sid To chck ndl saighnss, plac h fla sid of h ndl ono somhing fla (a ndl pla, glass c.) Th gap bn h ndl and h fla sufac should b consisn. Nv us a blun ndl. Gap Doubl Knis, (synhic and naual) Sch Vlou, Sch Ty, Sa Knis Lah, Vinyl, Sud TYPE of NEEDLE Univsal Ball Poin Blu Tippd Ndl Univsal Blu Tippd Ndl Ball Poin Wdg Poin Lah Ndl Univsal Ball Poin Wdg Poin Lah Ndl NEEDLE SIZE 9 (65) 9 (65) 11 (75) 11 (75) 12 (80) 11 (75) 11 (75) 11 (75) 14 (90) 14 (90) 14 (90) Havy Dnim, Sailcloh, Ticking Doubl Facd Wool, Havy Coaing, Fak Fu, Dapy Fabics Dnim Ndl Univsal 16 (100) 16 (100) Lah, Sud Wdg Poin Lah Ndl 16 (100) 18 (110) Vy Havy Canvas, Duck, Upholsy Fabics Univsal 16 (100) Topsiching fo Spcial Finishs Topsiching Ndl 14 (90) 8 Ss 525s Ons Manual/ Us Guid

11 Janom Sis 525s Insucion Manual Janom Sing Machin Winding h Bobbin (A) Sing h spool Plac a spool of had on h spool pin ih h had coming off h spool as illusad. (B) A: Pss h lag spool hold fimly agains h spool of had. Lag spool hold B: Fo a small spool, us h small spool hold. Small spool hold Addiional spool pin Th addiional spool pin is fo bobbin inding ihou unhading h machin. Ins h addiional spool pin ino h hol. Plac h fl and a spool on h pin. Addiional spool pin Spool pin fl Spool pin hol Rmoving h bobbin z Push h hook cov pla las buon o h igh and mov h cov pla. Hook cov pla las buon Hook cov pla x Lif ou h bobbin. Bobbin 9 Ss 525s Ons Manual/ Us Guid

12 Janom Sis 525s Insucion Manual Janom Sing Machin Winding h bobbin z x c v b n z Pull ou h handhl o disngag h cluch. Handhl x Da h had fom h spool. Guid h had aound h bobbin ind had guid. Bobbin ind had guid c Thad hough h hol in h bobbin fom h insid o h ousid. Pu h bobbin on h bobbin ind spindl ih h f nd of h had coming ou a h op. Bobbin ind spindl v Push h bobbin o h igh. NOTE: Do no mov h bobbin ind spindl hil h machin is unning. b Wih h f nd of h had hld in you hand, dpss h foo conol. Sop h machin hn h bobbin has bn ound a f lays, and cu h had clos o h bobbin. n Dpss h foo conol again. Whn h bobbin is fully ound, i ill sop auomaically. Run h bobbin ind o is oiginal posiion by moving h spindl o h lf, and cu h had as illusad. m m Push in h handhl o ngag h cluch. 10 Ss 525s Ons Manual/ Us Guid

13 Janom Sis 525s Insucion Manual Janom Sing Machin z Insing h bobbin z Plac h bobbin in h bobbin hold ih h had unning off as illusad. Thad x c v x Guid h had ino h fon noch on h fon sid of h bobbin hold. Da h had o h lf, sliding i bn h nsion sping blads. Fon noch Tnsion sping blad c Coninu o da h had lighly unil h had slips ino h sid noch. Sid noch v Pull ou abou 4 (10 cm) of had. Aach h hook cov pla. Chck h hading by fing o h cha shon on h hook cov pla. Thad y Hook cov pla y 11 Ss 525s Ons Manual/ Us Guid

14 Janom Sis 525s Insucion Manual Janom Sing Machin c z Thading h Machin To s h ndl had: Rais h had ak-up lv o h highs posiion by uning h handhl. Rais h pss foo. v b z x c v b x z Da h had fom h spool and pass i und h had guid. Thn da i don along h igh channl. Thad guid Righ channl x Da h had up aound h boom of h had guid pla. Pull h had up along h lf channl Thad guid pla Lf channl c Fimly da h had fom igh o lf ov h had ak-up lv and don ino h ak-up lv y. Thad ak-up lv v Da h had don along h lf channl and slip h had bhind h ndl ba had guid fom h lf. y Ndl ba had guid y b Pass h had hough h ndl y fom h fon o us h ndl had (f o h nx pag). 12 Ss 525s Ons Manual/ Us Guid

15 Janom Sis 525s Insucion Manual Janom Sing Machin z Ndl had z Rais h ndl o is highs posiion and lo h pss foo. Push don h ndl had knob as fa as i ill go. Th hook coms ou hough h ndl y fom bhind. Thad knob x c v x Da h had fom h lf aound h guid and und h hook. Guid Hook c Rlas h knob sloly hil holding h had nd ih you hand. A loop of h had is pulld up hough h ndl y. v Pull ou h nd of h had hough h ndl y. 13 Ss 525s Ons Manual/ Us Guid

16 Janom Sis 525s Insucion Manual Janom Sing Machin Daing up h Bobbin Thad z z Rais h pss foo and hold h ndl had lighly ih you lf hand. Ndl had x c x Tun h handhl sloly oad you on compl un. Bing h bobbin had up by pulling h ndl had as illusad. Ndl had Bobbin had c Pull 4 (10 cm) of boh hads back and und h pss foo. 14 Ss 525s Ons Manual/ Us Guid

17 Janom Sis 525s Insucion Manual Janom Sing Machin Slcing h Sich Pan Rais h ndl o is highs posiion. Pan slco dial Tun h pan slco dial o s h symbol of h dsid sich pan a h sing mak. Pan slco dial Sing mak CAUTION: Do no un h pan slco dial hil h ndl is in h fabic, ohis h ndl may bnd o bak. To slc h sch sich pans, s h sich lngh dial a S.S. Sch sich pans Sich Lngh Dial Tun h sich lngh dial o s h dsid sich lngh numb a h sing mak. Th high h numb, h long h sich Th mak shos h adjusmn ang hn sing h buonhol. Sing mak Sich lngh dial 15 Ss 525s Ons Manual/ Us Guid

18 Janom Sis 525s Insucion Manual Janom Sing Machin Adjusing sch sich balanc If h sch sich pans a unvn hn you s on a paicula fabic, coc hm by uning h sich lngh dial. + If h pans a dan ou, coc hm by sing h dial o h sid. If h pans a compssd, coc hm by sing h dial o h + sid. Sich Widh Dial Tun h sich idh dial o s h dsid sich idh numb a h sing mak. Th high h numb, h id h sich Sich idh dial Sing mak CAUTION: Do no un h sich idh dial hil h ndl is in h fabic, ohis h ndl may bnd o bak. Vaiabl ndl posiion Th ndl dop posiion of h saigh sichs can b movd bn h cn (5) and lf (0) ih h sich idh dial. 16 Ss 525s Ons Manual/ Us Guid

19 Janom Sis 525s Insucion Manual Janom Sing Machin Balancing Ndl Thad Tnsion Th had nsion should b adjusd dpnding on h sing maials, lays of fabic and sing mhod. To adjus h had nsion, un h nsion dial. Tnsion dial Balancd nsion: Th idal saigh sich has hads lockd bn o lays of fabic, as illusad. Fo an idal zigzag sich, h bobbin had dos no sho on h igh sid (op sid) of h fabic, and h ndl had shos slighly on h ong sid (boom sid) of h fabic. Ndl had (Top had) Bobbin had (Boom had) Righ sid (Top sid) of fabic Wong sid (Boom sid) of fabic Ndl had nsion is oo igh: Th bobbin had (boom had) ill appa on h igh sid (op sid) of h fabic. Loosn h ndl had nsion by moving h dial o a lo numb. Ndl had nsion is oo loos: Th ndl had (op had) ill fom loops on h ong sid (boom sid) of h fabic. Tighn h ndl had nsion by moving h dial o a high numb. 17 Ss 525s Ons Manual/ Us Guid

20 Janom Sis 525s Insucion Manual Janom Sing Machin SECTION 3. BASIC SEWING Saigh Sich Sing Machin sing: Sich pan: A Sich idh: 0 o 5 Sich lngh: Thad nsion: 2 6 Pss foo: Zigzag foo A Saing o s Rais h pss foo and plac h fabic und h foo. Lo h ndl ino h fabic. Lo h pss foo and smooh h hads oad h back. Dpss h foo conol. NOTES: Da h hads o h lf hn sing ih h buonhol foo. To fasn h bginning of h sam, fis s sval sichs in vs hn s foad. Changing h sing dicion Sop h machin and un h handhl oad you o bing h ndl don ino h fabic. Rais h pss foo. Pivo h fabic aound h ndl o chang sing dicion as dsid. Lo h pss foo and coninu sing in h n dicion. Finishing sing Pss h vs sich lv and s sval sichs in vs a h nd of h sam. Rais h pss foo and mov h fabic, daing h hads o h back. Da h hads up and ino h had cu. Th hads a cu h pop lngh fo saing h nx sam. Thad cu 18 Ss 525s Ons Manual/ Us Guid

21 Janom Sis 525s Insucion Manual Janom Sing Machin Sam guids on h ndl pla Th sam guids on h ndl pla hlp you o masu sam alloanc. Th numbs indica h disanc bn h cn ndl posiion and h sam guid. Sam guids Numb /8 5/8 6/8 Spacing (cm) Spacing (inch) (5/8) (3/4) 1/2 5/8 3/4 Tuning a sua con Th coning guid hlps you mainain a 5/8 (1.6 cm) sam alloanc hn sing a con. Whn h fabic dg facing you lins up ih h coning guid as illusad, sop siching and lo h ndl ino h fabic by uning h handhl oad you. Rais h pss foo and pivo h fabic so h dg of h fabic ill align ih h 5/8 (1.6 cm) sam guid. Lo h pss foo and sa siching in h n dicion. Coning guid 19 Ss 525s Ons Manual/ Us Guid

22 Janom Sis 525s Insucion Manual SECTION 4. UTILITY STITCHES Basic Zigzag Machin sing Sich pan: C Sich idh: 1 5 Sich lngh: Thad nsion: 2 5 Pss foo: Zigzag foo A Janom Sing Machin Simpl zigzag siching is idly usd fo ovcasing, sing on buons c. Adjus h sich lngh o sui you sing nds. NOTE: Us a sabiliz fo sch fabics such as ico and knis o pvn pucking. Ovcasing Machin sing Sich pan: C Sich idh: 5 Sich lngh: 1 2 Thad nsion: 3 7 Pss foo: Ovdg foo C Ovcasing is usd o pvn fabics fom avling a a dgs. I can b usd o finish a hm dg. Plac h dg of h fabic nx o h guid of foo and s hil guiding h fabic dg along h guid. y Guid y CAUTION: Do no s h sich idh lss han 5 hn using h ovdg foo C, ohis h ndl may hi h foo causing h ndl o bnd o bak. 20 Ss 525s Ons Manual/ Us Guid

23 Janom Sis 525s Insucion Manual Janom Sing Machin Kni Sich Machin sing Sich pan: G Sich idh: 5 Sich lngh: S.S. Thad nsion: 3 7 Pss foo: Ovdg foo C y This sich is idal fo finishing dgs of sch fabics. I sams and finishs h fabic dgs simulanously. Plac h dg of h fabic nx o h guid of foo and s hil guiding h fabic dg along h guid. y Guid CAUTION: Do no s h sich idh lss han 5 hn using h ovdg foo C, ohis h ndl may hi h foo causing h ndl o bnd o bak. Tico Sich (Mulipl Zigzag Sich) Machin sing Sich pan: D Sich idh: 3 5 Sich lngh: Thad nsion: 3 6 Pss foo: Zigzag foo A This sich is usd o finish a a dg on synhics and oh fabics ha nd o puck. Plac h fabic o lav a 5/8" (1.6 cm) alloanc. Tim h xa alloanc af sing. I is also usd fo mnding as. 21 Ss 525s Ons Manual/ Us Guid

24 Janom Sis 525s Insucion Manual Janom Sing Machin Saigh Sch Sich Machin sing Sich pan: A Sich idh: 0 o 5 Sich lngh: S.S. Thad nsion: 2 5 Pss foo: Zigzag foo A Th pan is sn ih o sichs foad and on sich backad, foming a sam ha dos no ip asily. Us i o infoc aas such as coch and amhol sams. Also us i hn consucing ims such as backpacks fo xa sngh. Cafully guid h fabic hil sing as h fabic movs back and foh. Zigzag Sch Sich Machin sing Sich pan: C Sich idh: 2 5 Sich lngh: S.S. Thad nsion: 2 5 Pss foo: Zigzag foo A S on sch fabics in any aa ha you migh us a zigzag sich. This sich is usd as a dcoaiv opsich as ll. 22 Ss 525s Ons Manual/ Us Guid

25 Janom Sis 525s Insucion Manual Janom Sing Machin Buon Sing Machin sing Sich pan: C Sich idh: Adjus as ncssay Sich lngh: Any Thad nsion: 3 7 Pss foo: Buonhol foo B y Fd dog: Lod y Unhad h ndl. Adjus h sich idh o mach i ih h span of h hols in h buon. Tun h handhl o chck if h ndl ns ino ach hol in h buon. Lo h foo o hold h buon in plac. Th hols in h buon should align ih h slo of h foo. A pin can b placd on h foo o fom a shank. Mak su o chck if h ndl ns ino boh hols in h buon. Pin R-had h ndl and s abou 10 sichs and cu h ndl and bobbin hads a h bginning. Rais h pss foo and mov h fabic. Cu h ndl and bobbin hads laving 8 (20 cm) ails. Bing h ndl had bn h buon and fabic hough h hols in h buon. Pull h ndl had o pick bobbin had up o h igh sid of h fabic. Wind h hads o fom a shank and i hm ogh. Ndl had Bobbin had NOTE: Rais h fd dog af sing. 23 Ss 525s Ons Manual/ Us Guid

26 Janom Sis 525s Insucion Manual Janom Sing Machin Auomaic Buonhol Machin sing Sich pan: BH Sich idh: 4 5 Sich lngh: Thad nsion: 1 5 Pss foo: Auomaic buonhol foo R z x (A) (B) NOTES: Th siz of buonhol is auomaically dmind by placing h buon in h auomaic buonhol foo. Th buon hold of h foo aks a buon siz up o 1" (2.5 cm) in diam. Mak a s buonhol on a sampl duplicaing h fabic, infacing and sams of h acual gamn o chck h sings. Us infacing on sch fabics. Tun h handhl oad you o ais h ndl o is highs posiion. z Plac h auomaic buonhol foo ih h pin lis jus und h goov on h foo hold. Lo h foo lif o snap h foo in plac. Goov Pin x Pull o opn h buon hold o h back (A), and plac h buon in i. Push back (B) h buon hold agains h buon o hold i igh. Buon hold NOTE: Fo hick buons, mak a s buonhol. If h buon dos no fi hough h s buonhol, lnghn h buonhol by pulling h buon hold a lil o h back. Pull a lil 24 Ss 525s Ons Manual/ Us Guid

27 Janom Sis 525s Insucion Manual Janom Sing Machin c c Pull h buonhol lv don as fa as i ill go. Buonhol lv v b n y i o!0!2!1 u v Rais h foo and pass h ndl had hough h opning in h foo. Da boh ndl and bobbin hads o h lf. Ins h fabic und h foo and lo h ndl ino h fabic a h saing poin. Lo h foo. Ndl had y Bobbin had u Opning i Saing poin NOTE: Mak su h is no gap bn h slid and fon sopp. If h is a gap, h lngh of h igh and lf os of h buonhol ill diff. o Slid!0 Fon sopp!1 Diffnc!2 Th should b no gap. b S sloly and sop h machin hn a buonhol is compld. Th machin ss h fon baack and lf o fis, hn h back baack and igh o. n Rais h foo and mov h fabic. Cu boh ndl and bobbin hads laving abou 4" (10 cm) had nds. Da h ndl had o ong sid of fabic by pulling h bobbin had. Thn, kno h hads. Ins a pin insid h baack. Thn cu h opning ih sam ipp. Tak ca no o cu h sichs. 25 Ss 525s Ons Manual/ Us Guid

28 Janom Sis 525s Insucion Manual Janom Sing Machin To s anoh buonhol, un h sich slco o RESET, hn back o again, as shon. No, simply sp on h foo conol o s an idnical buonhol. m m Whn buonhol sing is finishd, push h buonhol lv up as fa as i ill go. Adjusing h buonhol sich dnsiy Tun h sich lngh dial ihin h ang of o adjus h buonhol sich dnsiy. Sich lngh dial 26 Ss 525s Ons Manual/ Us Guid

29 Janom Sis 525s Insucion Manual Janom Sing Machin Codd Buonhol Machin sing Sich pan: BH Sich idh: 4 5 Sich lngh: Thad nsion: 1 5 Pss foo: Auomaic buonhol foo R z x c z Wih h buonhol foo aisd, hook h fill cod on h spu a h back of h foo. Bing h nds oad you und h foo, claing h fon nd. Hook h fill cod ino h foks on h fon of h foo o hold hm igh. Spu Foks x Da boh ndl and bobbin had o h lf. Lo h ndl ino h fabic a h saing poin and lo h foo. Dpss h foo conol gnly and s h buonhol ov h cod. Th sing sunc is h sam as h auomaic buonhol. Ndl had Bobbin had Saing poin c Pull h lf nd of h fill cod o ighn i and cu h xcss ails. To cu h buonhol opning, f o h insucions on pag Ss 525s Ons Manual/ Us Guid

30 Janom Sis 525s Insucion Manual Janom Sing Machin z x c Manual Buonhol Machin sing Sich pan: BH Sich idh: 4 5 Sich lngh: Thad nsion: 1 5 Pss foo: Buonhol foo B If h diam of h buon is mo han 1" (2.5 cm), a buonhol mus b mad manually as follos: z Rplac h foo ih h buonhol foo B. x Pull h buonhol lv don as fa as i ill go. Da boh ndl and bobbin had o h lf. Lo h ndl ino h fabic a h saing poin, and lo h foo. Ndl had Bobbin had Saing poin c S h fon baack and lf o o h dsid lngh hn sop h machin. v v Click h buonhol lv oad you. 28 Ss 525s Ons Manual/ Us Guid

31 Janom Sis 525s Insucion Manual Janom Sing Machin b b Rsa h machin o s h back baack and igh o, and hn sop h machin a h saing poin. n n Whn buonhol sing is finishd, push h buonhol lv up as fa as i ill go. 29 Ss 525s Ons Manual/ Us Guid

32 Janom Sis 525s Insucion Manual Janom Sing Machin Zipp Applicaion Machin sing Sich pan: A Sich idh: 5 Sich lngh: Thad nsion: 3 6 Pss foo: Zipp foo E z x i (A) o u y Aaching h zipp foo A: To s h lf sid of h zipp, aach zipp foo ih h igh sid pin. B: To s h igh sid of zipp, aach h zipp foo ih h lf sid pin. Goov Pin Fabic ppaaion z Add 3/8 (1 cm) o h zipp siz. This is h ovall opning siz. Righ sid of h fabic 3/8 (1 cm) Opning siz Zipp siz Slid y Zipp h u Zipp ap i Wong sid of h fabic o End of h opning!3!1!0 (B)!4!2 x Plac h igh (op) sids of h fabic ogh. S a boom sam 5/8" (2 cm) fom h igh dg o h zipp boom sop posiion. S a f sichs in vs o lock. Incas h sich lngh o 4, s ndl had nsion o 1, and bas h ni lngh of h fabic.!0 5/8 (2 cm)!1 Basing!2 Rvs sich!3 End of h opning!4 Boom sam 30 Ss 525s Ons Manual/ Us Guid

33 Janom Sis 525s Insucion Manual Janom Sing Machin z x c v o!0 i u y To s z Aach zipp foo ih h igh sid pin. Fold back h upp lay sam alloanc. Fold back h lo lay sam alloanc o lav a 1/8" (0.4 cm) magin of fabic. Lo lay End of h opning Zipp h 1/8 (0.4 cm) magin Upp lay y Opning siz u Foldd dg i Basing x Plac zipp h nx o magin dg and bas h zipp ap o h lo fabic lay. Align zipp foo ih magin dg.run had nsion and sich lngh o oiginal sings. S a sam h ni lngh of zipp ap. c Sop h machin 2 (5 cm) bfo aching h slid, ih ndl in h fabic and ais h foo, hn unzip a f inchs o cla a pah fo siching. o Slid!0 2 (5 cm) v Rmov fabic and clos zipp. Tak h upp fabic lay and lay i fla ov h zipp. Bas h zipp ap o h upp fabic lay.!1 Basing!2 Zipp ap o!1!2 31 Ss 525s Ons Manual/ Us Guid

34 Janom Sis 525s Insucion Manual Janom Sing Machin b n!4!3 b Rais and las h foo, and -aach i ih h lf sid pin. Saing jus blo zipp boom sop, s acoss fabic o abou 3/8" (1 cm) disanc fom h basing lin. Tun fabic 90 dgs and s a sam h ni lngh of h zipp ap. Bfo aching h slid, sop h machin ih ndl in fabic and ais h foo. Us sam ipp o opn a f inchs of basing sich.!3 Unsich basing!4 3/8" (1 cm) n Unzip a f inchs o cla a pah fo siching. A nd of sam, s a f sichs in vs o lock. Onc boh sids of zipp a sn, us h sam ipp o opn h basing sich. 32 Ss 525s Ons Manual/ Us Guid

35 Janom Sis 525s Insucion Manual Janom Sing Machin Blind Hmming Machin sing Sich pan: E o F Sich idh: 2 3 Sich lngh: 2 3 Thad nsion:1 4 Pss foo: Blind hmming foo G z x c v y u z On havy igh fabics ha avl, h a dg should b ovcas fis. Fold h hm und h fabic as illusad fo fin o mdium fabics. Fold a hm ih h ong sid up foming a 1/8 (0.5 cm) alloanc. Wong sid of h fabic 1/8 (0.5 cm) Havy igh fabic Fin and mdium igh fabic x Plac h fabic so ha h ndl jus pics h foldd dg hn h ndl coms ov h xm lf sid. Lo h pss foo. c Tun h sc o align h guid on h foo ih h foldd dg so ha h ndl jus pics h fold. If h ndl pics oo fa lf, mov h guid slighly o h lf. If h ndl misss h fold, mov h guid slighly o h igh. S sloly hil guiding h foldd dg along h guid. Sc y Guid u Foldd dg i v Opn and pss h fabic af sing is finishd. i Righ sid of h fabic NOTE: If h ndl dops oo fa lf, h sichs ill b appan on h igh sid of h fabic. 33 Ss 525s Ons Manual/ Us Guid

36 Janom Sis 525s Insucion Manual Dcoaiv Sain Sichs Janom Sing Machin SECTION 5. DECORATIVE STITCHES Machin sing Sich pan: I L Sich idh: 3 5 Sich lngh: Thad nsion:1 4 Pss foo: Zigzag foo A o Buonhol foo B Dmin h appopia sich dnsiy by s sing. Fo a dlica appaanc on fabic such as chiffon, us a singl lay ih a a-aay backing, if ncssay. Rduc h ndl had nsion slighly o achiv h b sul. Dcoaiv Sch Sichs Machin sing Sich pan: A L Sich idh: 3 5 Sich lngh: S.S. Thad nsion:1 4 Pss foo: Zigzag foo A Dcoaiv sch pans a usd fo adding a caiv and psonalizd ouch o ims. Cafully guid h fabic hil sing as h fabic movs back and foh. 34 Ss 525s Ons Manual/ Us Guid

37 Janom Sis 525s Insucion Manual Janom Sing Machin Smocking Machin sing Sich pan: D Sich idh: 3 5 Sich lngh: S.S. Thad nsion:1 4 Pss foo: Zigzag foo A Sp 1: Choos a sof and lighigh fabic such as bais, gingham o challis. Cu h fabic h ims id han h pojc idh. Incas h sich lngh o 4 and loosn had nsion o 1. S os of saigh sichs 3/8" (1 cm) apa acoss h aa o b smockd. 3/8 (1 cm) Sp 2: Kno h hads along on nd. Fom h oh nd, pull h bobbin hads o disibu gahs vnly and scu h hads. Run h had nsion o h oiginal sing. S os of h smocking sich bn h gahing sichs. Rmov h gahing sichs af finishd. 35 Ss 525s Ons Manual/ Us Guid

38 Janom Sis 525s Insucion Manual Janom Sing Machin Quiling y Machin sing Sich pan: A Sich idh: 0 o 5 Sich lngh: Thad nsion:3 6 Pss foo: Zigzag foo A y Quiling guid Th uiling guid ill hlp kp h sam spacing consan. Ins h uiling guid ino h opning and s h uiling guid a h dsid sam spacing. Quiling guid Opning fo h uiling guid S, acing h pvious o of siching ih h uiling guid. Sam spacing 36 Ss 525s Ons Manual/ Us Guid

39 Janom Sis 525s Insucion Manual Janom Sing Machin Pin Tucking Machin sing Sich pan: A Sich idh: 0 o 5 Sich lngh: Thad nsion:2 6 Pss foo: Blind hmming foo G Fold a fabic ong sid ogh and Lo h ndl ino h fabic cm insid h foldd dg. Lo h foo and un h sc o align h guid on h foo ih h foldd dg. S sloly hil guiding h foldd dg along h guid. Opn h fabic and ion pss h ucks. Sc Guid Foldd dg Shll Tucking Machin sing Sich pan: G Sich idh: 5 Sich lngh: 2 3 Thad nsion:6 8 Pss foo: Buonhol foo B Us a lighigh fabic (ico, fo xampl). Fold and sich on h bias. Whn h ndl sings o h igh, allo h ndl o jus cla h foldd dg of h fabic. Af siching, opn h fabic and ion pss h ucks fla o on sid. NOTE: Incas h ndl had nsion o fom pominn ucks. 37 Ss 525s Ons Manual/ Us Guid

40 Janom Sis 525s Insucion Manual Janom Sing Machin Fagoing Machin sing Sich pan: H Sich idh: 3 5 Sich lngh: 1 3 Thad nsion:1 4 Pss foo: Zigzag foo A Us his sich o join o pics of fabic o ca an opn ok appaanc, and add dsign ins. Fold und ach fabic dg 1/2" (1.3 cm) and pss. Pin h o dgs o a pic of pap o a-aay backing 1/8" (0.3 cm) apa. Pap S sloly, guiding h fabic so h ndl cachs h foldd dg on ach sid. Ta aay h backing af sing is finishd. Pachok Machin sing Sich pan: D Sich idh: 5 Sich lngh: 1 3 Thad nsion:1 4 Pss foo: Zigzag foo A Plac o lays of h fabic ih h igh sid ogh. Sam along h dgs ih h saigh sich. Opn fabics fla and fold ach sam alloancs. Plac h fabic und h foo so ha h sam lin machs h cn of h foo idh. Lo h foo and s h pan along h sam lin. Righ sid of h fabic 38 Ss 525s Ons Manual/ Us Guid

41 Janom Sis 525s Insucion Manual Janom Sing Machin Appliué Machin sing Sich pan: C Sich idh: 3 5 Sich lngh: Thad nsion:1 4 Pss foo: Buonhol foo B y Foo pssu: 2 y Bas appliué pics on h fabic, o fus h appliué pics ih an ion-on fabic join. Sich aound h appliué, making su h ndl a h igh sing falls along h ou dg of h appliué. Tuning h con: Sop h machin and lo h ndl ino h fabic a h ou dg of h appliué. Rais h pss foo and pivo h fabic ino h n dicion. NOTE: Run h foo pssu dial o 3 af finishing. 39 Ss 525s Ons Manual/ Us Guid

42 Janom Sis 525s Insucion Manual Janom Sing Machin SECTION 6. CARE AND MAINTENANCE WARNING: Tun h po sich off and unplug h machin bfo claning. NOTE: Do no dismanl h machin in any ay oh han ha is xplaind in his scion. z x c v b Clan h ousid of h machin ih a sof cloh and mild soap. Claning h Hook Rac and Fd Dogs z Rmov h pss foo and ndl. Rmov sc on h ndl pla ih h scdiv. Rmov h ndl pla and ak ou h bobbin. Sc x Lif up h bobbin hold and mov i. Bobbin hold c Bush ou dus and lin. Wip h bobbin hold ih a sof, dy cloh. v Clan h fd dogs and hook ac ih h lin bush. Lin bush Fd dogs b Wip h hook ac ih a sof, dy cloh. Hook ac NOTE: You may also us a vacuum clan. 40 Ss 525s Ons Manual/ Us Guid

43 Janom Sis 525s Insucion Manual Janom Sing Machin Rplacing h Bobbin Hold z z Ins h bobbin hold ino h hook ac. x c x Mak su h knob of h bobbin hold fis nx o h sopp on h ac. Knob Sopp c Rplac h bobbin. Aach h ndl pla, insing h o guid pins ino h hols in h ndl pla. Tighn h sc fimly ih h scdiv. Guid hols Sc Rplacing h Ligh Bulb WARNING: Whn placing h bulb, sich off and unplug h machin. Wai fo h ligh bulb o cool don bfo ouching i. Rmov h cap and sc. Rmov h fac pla. Cap Sc Fac pla Push and un h bulb counclockis o mov i. Push and un h bulb clockis o plac i. Ligh bulb 41 Ss 525s Ons Manual/ Us Guid

44 Janom Sis 525s Insucion Manual Janom Sing Machin Toublshooing Condiion Caus Rfnc 1. Th ndl had is no hadd poply. Pag Th ndl had nsion is oo igh. Pag Th ndl is bn o blun. Pag 8 4. Th ndl is incocly insd. Pag 8 5. Th ndl had and h bobbin had a no dan o h a and s poply und h pss foo hn saing sing. Pag Th fabic is no dan o h a hn sing is finishd. Pag Th had is oo havy o oo fin fo h ndl. Pag 8 1. Th bobbin had is no hadd poply in h bobbin hold. Pag Lin has collcd in h bobbin hold. 3. Th bobbin is damagd and dos no un smoohly. 4. Th had is ound loosly on h bobbin. Th ndl had baks. Th bobbin had baks. Th ndl baks. Th ndl had loops. Skippd sichs Sam pucking Th cloh is no fd smoohly. Th machin dos no ok. Pans a disod. Th buonhol is no sn ll. 1. Ndl is incocly insd. 2. Th ndl is bn o blun. 3. Th ndl clamp sc is loos. 4. A pop foo is no usd. 5. Th fabic is no dan o h a hn sing is finishd. 6. Th ndl is oo fin fo h fabic bing sn. 1. Th ndl had nsion is oo loos. 2. Th ndl siz is no suiabl fo h had. 1. Th ndl is incocly insd. 2. Th ndl is bn o blun. 3. Th ndl and/o had a no suiabl fo h fabic bing sn. 4. A blu ip ndl is no usd fo sing sch, vy fin fabics and synhics. 5. Th ndl had is no hadd poply. 6. A poo ualiy ndl is usd. 1. Th ndl had nsion is oo igh. 2. Th ndl had is no hadd poply. 3. Th ndl is oo havy fo h fabic bing sn. 4. Th sich lngh is oo long fo h fabic. * Us a sabiliz fo vy fin fabics. 1. Th fd dog is packd ih lin. 2. Th sichs a oo fin. 3. Th fd dog as no aisd af bing lod. 4. Th foo pssu is no adjusd poply. 1. Th machin is no pluggd in. 2. Thad is caugh in h hook ac. 3. Th handhl is pulld fo bobbin inding. 1. Th sich is no balancd. Pag 40 Rplac h bobbin R-ind h bobbin. Pag 8 Pag 8 Pag 8 Us pop foo. Pag 18 Pag 8 Pag 8 Pag 8 Pag 8 Pag 8 Pag 10 Rplac h ndl Pag 17 Pag 11 Pag 8 Mak sich sho Pag 40 Mak sich long Pag 6 Pag 6 Pag 5 Pag 40 Pag 10 Pag Th sich dnsiy is no suiabl fo h fabic bing sn. 2. Infacing is no bing usd ih sch fabics. Pag 17 Pag 8 Pag 26 Pag 24 Noisy opaion 1. Th fd dog is packd ih lin. 2. Lin has collcd in h bobbin hold. Pag 40 Pag 40 Lay slippag 1. Th foo pssu is no adjusd poply. Pag 6 42 Ss 525s Ons Manual/ Us Guid

45 Janom Sis 525s Insucion Manual Janom Sing Machin (E) Pind in Taian Ss 525s Ons Manual/ Us Guid