PART IV - Technical Reference
|
|
|
- Maximillian Long
- 5 years ago
- Views:
Transcription
1 PART IV - Technical Reference Ver
2 KUKA Fig. Numbering System BALL TYP BODY TYP PORT TYP / KUKA COD PRSSUR SIZ RDUCD PORT UNI-BODY CAA15 CLASS 150 1/2" ~ 10" CAA30 CLASS 300 1/2" ~ 10" RDUCD PORT CCA15 CLASS 150 3/4" ~ 10" CCA30 CLASS 300 3/4" ~ 10" CCA60 CLASS 600 2" ~ 8" FLOATING CCA90 CLASS 900 1" ~ 2" CCA51 CLASS " ~ 2" BALL CCA52 CLASS /4" ~ 1.1/2" SPLIT-BODY FULL PORT CBA15 CLASS 150 1/2" ~ 8" CBA30 CLASS 300 1/2" ~ 8" CBA60 CLASS 600 1/2" ~ 6" CBA90 CLASS 900 3/4" ~ 1.1/2" CBA51 CLASS /4" ~ 1.1/2" CBA52 CLASS /2" ~ 1.1/2" RDUCD PORT CGA15 CLASS 150 3" ~ 36" CGA30 CLASS 300 3" ~ 36" TRUNNION CGA60 CLASS 600 2" ~ 26" CIA90 CLASS 900 3" ~ 24" MOUNTD CIA51 CLASS " ~ 24" CIA52 CLASS " ~ 14" BALL SPLIT-BODY FULL PORT CFA15 CLASS 150 2" ~ 36" CFA30 CLASS 300 2" ~ 36" CFA60 CLASS 600 1" ~ 24" CHA90 CLASS 900 2" ~ 24" CHA51 CLASS " ~ 24" CHA52 CLASS " ~ 14" Ver
3 Design Feature (1/3) Ver
4 Design Feature (2/3) Ver
5 Design Feature (3/3) Ver
6 3D Simulation (1/5) MODL #CAA15/CAA30 Class 150/300 1/2"~10" NO PART NAM MATRIAL NOTS NO PART NAM MATRIAL NOTS 1 BODY A216-WCB/A351-CF8M LVR BOLT A307-B/A193-B8 6"AND SMALLR 2 RTAINR A216-WCB/A351-CF8M L LVR DUCTIL IRON 6"AND SMALLR 3 BALL A351-CF8/CF8M V SOCKT BOLT A193-B7/B8 8" AND LARGR 4 STM A /316 R LVR SOCKT DUCTIL IRON 8" AND LARGR 5 ISO PAD A216-WCB/A351-CF8 3" AND LARGR LVR PIP CARBON STL 8" AND LARGR 6 STOPPR A283-D/A PACKING GRAPHIT+CARBON FIBR 8 STM SAL RTAINR A /316 4" AND LARGR 9 STM BARING PTF 10 PAD BARING PTF 11 THRUST BARING PTF 12 O-RING-A VITON 13 O-RING-B VITON 14 BALL SAT PTF/RTF 15 PAD BOLT A193-B7/B8 16 STOPPR BOLT A193-B7/B9 17 GASKT-A PTF 18 GASKT-B S/W(316+Gr) Ver
7 3D Simulation (2/5) MODL #CBA15/CBA30 MODL #CBA15/CBA30 Class 150/300 1/2"~ 8" NO PART NAM MATRIAL NOTS NO PART NAM MATRIAL NOTS 1 BODY A216-WCB/A351-CF8M LVR BOLT A307-B/A193-B8 4"AND SMALLR 2 CAP A216-WCB/A351-CF8M L LVR DUCTIL IRON 4"AND SMALLR 3 BALL A351-CF8/CF8M V SOCKT BOLT A193-B7/B8 6" AND LARGR 4 STM A /316 R LVR SOCKT DUCTIL IRON 6" AND LARGR 5 ISO PAD A /316 LVR PIP CARBON STL 6" AND LARGR 6 STOPPR A283-D/A PACKING GRAPHIT+CARBON FIBR 8 STM SAL RTAINR A /316 3" AND LARGR 9 STM BARING PTF 10 PAD BARING PTF 11 BACK SAT PTF 12 O-RING-A VITON 13 O-RING-B VITON 14 BALL SAT PTF/RTF 15 PAD BOLT A193-B7/B8 16 STOPPR BOLT A193-B7/B8 17 STUD BOLT A193-B7M/B8 18 NUT A194-2HM/8 19 GASKT S/W(316+Gr) Ver
8 3D Simulation (3/5) MODL #CFA15/CFA30 Class 150/300 2"~36" NO PART NAM MATRIAL NOTS NO PART NAM MATRIAL NOTS 1 BODY A216-WCB 37 BOTTOM COVR A216-WCB 2 CAP A216-WCB 38 SAT RTAINR A351-CF8M 3 BALL A351-CF8M 39 SAT FOLLOWR A351-CF8M 4 STM A O-RING(STM) VITON 5 LOWR STM A O-RING(STUFFING) VITON 6 STM SAL RTAINR A O-RING(RTAINR) VITON 10 BALL SAT RTF 46 O-RING(COVR) VITON 11 GLAND PACKING GRAPHIT 49 DRAIN PLUG AISI 1020+Zn PLAT 12 GASKT(JOINT) S/W(316+GR.) 50 SAT SALANT C1215-ANODIZD OPTION 13B GASKT(COVR) GRAPHIT 51 STUFFING SALANT C1215-ANODIZD OPTION 15 PAD BARING PTF 52 CAVITY VNT C1215-ANODIZD OPTION 17 STM BARING DU-BUSH 54 SAT RTAINR SPRING INCONL X LOWR STM BARING DU-BUSH 57 ANTI-STATIC SPRING A THRUST BARING-A RTF 58 ANTI-STATIC BALL A THRUST BARING-B RTF 65 PIVOT A RTAINR SAL GRAPHIT G KY AISI STUD BOLT-A A193-B7M+ZP AR GAR BOX KUKA STANDARD 26 STUD BOLT-B A193-B7M+ZP STOPPR A283-D 27 NUT-A A194-2HM+ZP L STOPPR BOLT A193-B7+ZP 29 PAD BOLT A193-B7+ZP V LVR BOLT A307-B+ZP 31 COVR BOLT A193-B7+ZP R LVR PIP CARBON STL 36 MOUNTING PAD A216-WCB LVR SOCKT DUCTIL IRON GAR & LVR TYP : SIZ 6"~10" / GAR TYP : SIZ 12" AND LARGR Ver
9 3D Simulation (4/5) MODL #CFA60 : Trunnion Mounted 600# Class 600 2"~36" NO PART NAM MATRIAL NOTS NO PART NAM MATRIAL NOTS 1 BODY A ISO PAD A105 2 CAP A216-WCB 37 BOTTOM COVR A216-WCB/A105 3 BALL A351-CF8M 38 SAT RTAINR A351-CF8M/A182-F316 4 STM A SAT FOLLOWR A351-CF8M/A182-F317 5 LOWR STM A O-RING(STM) VITON 10 BALL SAT RTF 43 O-RING(STUFFING) VITON 11 GLAND PACKING GRAPHIT 44 O-RING(RTAINR-A) VITON 12 GASKT-A GRAPHIT 46 O-RING(COVR) VITON 13 GASKT-B GRAPHIT 47 O-RING(GASKT) VITON 14 GASKT-C GRAPHIT 49 DRAIN PLUG AISI 1020+Zn PLAT 15 PAD BARING PTF 50 SAT SALANT C1215-ANODIZD OPTION 17 STM BARING DU-BUSH 51 STUFFING SALANT C1215-ANODIZD OPTION 18 LOWR STM BARING DU-BUSH 52 CAVITY VNT C1215-ANODIZD OPTION 19 THRUST BARING-A RTF 54 SAT RTAINR SPRING INCONL X THRUST BARING-B RTF 57 ANTI-STATIC SPRING A RTAINR SAL GRAPHIT 58 ANTI-STATIC BALL A STUD BOLT-A A193-B7M+ZP 64 PIN A STUD BOLT-B A193-B7M+ZP 65 PIVOT A NUT A194-2HM+ZP 66 KY AISI PAD BOLT A193-B7+ZP 67 LIFTING LUG A283-D 31 COVR BOLT A193-B7+ZP GAR BOX KUKA STANDARD 33 ACTUATOR BOLT A193-B8+ZP Ver
10 3D Simulation (5/5) MODL #CHA90/CHA51 Class 900/1500 2"~ 24" NO PART NAM MATRIAL NOTS NO PART NAM MATRIAL NOTS 1 BODY A350-LF2 42 O-RING(STM) VITON 2 CAP A350-LF2 43A O-RING(BODY-A) VITON 3 BALL A350-LF2+NP 43B O-RING(BODY-B) VITON 4 STM A C O-RING(BODY-C) VITON 4" AND SMALL 5 LOWR STM A O-RING(RTAINR) VITON 8 GLAND A350-LF2 48 O-RING(CAP) VITON 10 BALL SAT DVLON 49 DRAIN PLUG 316SS 11 GLAND PACKING GRAPHIT 50 SAT SALANT 316SS OPTION 13A GASKT-A GRAPHIT 51 STUFFING SALANT 316SS OPTION 13B GASKT-B GRAPHIT 52 CAVITY VNT 316SS OPTION 13C GASKT-C GRAPHIT 53 CHCK VALV 316SS OPTION 13D GASKT-D GRAPHIT 54 SAT RTAINR SPRING INCONL X PAD BARING STL/PTF 57 ANTI-STATIC SPRING A STM BARING STL/PTF 58 ANTI-STATIC BALL A LOWR STM BARING STL/PTF 63 SAT SPAC NYLON 19 THRUST BARING-A STL/PTF 64 PIN SUS THRUST BARING-B STL/PTF 93 LIFTING LUG A283-D 25 STUD BOLT-A A320-L7M+ZP G ACTUATOR BOLT A320-L7M+ZP 26 STUD BOLT-B A320-L8M+ZP NUT-B A194-7M+ZP 27 NUT-A A194-7M+ZP A KY CS GLAND BOLT A193-B8 R GAR BOX KUKA STANDARD 29 PAD BOLT A193-B8 LVR STOP PINS A COVR BOLT A193-B8 L LVR BOLT A193-B8 36 MOUNTING PAD AISI 1020 LVR PIP BOLT A193-B9 V 37 BOTTOM COVR AISI 1021 LVR PIP CARBON STL 38 SAT RTAINR A350-LF2+NP R HAD LVR A216-WCB 39 SAT FOLLOWR A350-LF2+NP LVR NUT A194-8 GAR & LVR TYP : SIZ 2"~4" / GAR TYP : SIZ 6" AND LARGR Ver
Series 8R HIGH PERFORMANCE
Triac 8R Series s are the finest quality 3-piece valves on the market. The high quality investment castings feature a fully machined bore. The superior live-loaded packing system is accomplished with Belleville
Bushing Viton O-ring (Other material available) Anti-Static Device
Triac Ball Valves feature a high quality investment cast body and end. They are available in sizes from 1/4 to 3. Superior leak protection is accomplished by using our patented Pyramidal stem seal system
Series C8/CR Cryogenic
Triac C8/CR Series 3-Piece Ball feature a direct mount automation pad. The high quality investment castings feature a fully machined bore. The superior live loaded packing system is accomplished with Belleville
HEAVY DUTY KNIFE GATE VALVE
HEAVY DUTY KNIFE GATE VALVE The (SER.22) model knife gate is a bi-directional lug type valve designed according to MSS-SP-81 and TAPPI TIS 405-8 for industrial service applications. The completely new
600 Series. Brass Ball Valves
Series Brass Ball Valves full range of economical brass ball valves intended for your common fluid control applications. vailable in standard and full port threaded, full port solder end, and full port
Telefon (+45) Telefax (+45)
Uni-Valve A /S VENTILER & INSTRUMENTER Telefon (+45) 43 43 82 00 Telefax (+45) 43 43 74 75 mail@uni-valve.com www.uni-valve.com UNI-S83 / S84 3/4-way ball valve Installation and Operating manual 3/4-WAY
Meter, PD Series, E3 S6, S7 All Parts List
Issue/Rev. 0.0 (3/13) Meter, PD Series, E3 S6, S7 All Parts List Bulletin PO01005 32 68 29 17 68 16 14 19 15 68 20 54 22 18 24 58 23 10 59 41 31 56 55 57 47 52 25 27 34 34 26 40 67 44 39 The Most Trusted
Valves, Valve Automation & Accessories
A DODSON GLOBAL COMPANY Valves, Valve Automation & Accessories Ball Valves One-Piece Standard Port Ball Valves 156 RT - Carbon 166 RT - Stainless / A216-WCB 1-pc. Reduced Port Ball Valve 266 FT-DM ISO
3" 24" 80A 600A DN80 DN600 Body size The largest size manufactured : 60" (1500A) Disc form Damper type Trim materials Trim treatment
STANDARD SPECIFICATION SS-CE-600B-A JUL. 2004 600B Disc Damper Type Butterfly Valve GENERAL 600B STANDARD SPECIFICATIONS BODY Series 600B This series 600B is a wafer type butterfly valve, designed to be
FLANGED TWO-PIECE BALL VALVES
INTRODUCTION This instruction manual includes installation, operation, and maintenance information for FNW flanged split-body ball valves. This manual addresses lever operated ball valves only. Please
FLANGED TWO-PIECE BALL VALVES
INTRODUCTION This instruction manual includes installation, operation, and maintenance information for FNW flanged split-body ball valves. This manual addresses lever operated ball valves only. Please
Dean Pump Self-Priming Chemical Process Pumps
Bulletin C 1.2.34.7 Dean Pump Self-Priming Chemical Process Pumps php Series HEAD CAPACITY RANGE CHARTS php Self Primer - 2 Pole 3500 RPM 500 CAPACITY M 3 /HR 2900 RPM 50 HERTZ 25 50 75 125 150 400 TOTAL
KTM METALTITE BALL VALVES - FLOATING TYPE INSTALLATION AND OPERATION MANUAL
The content of this manual is effective as of April 2015. KTM reserves the right to discontinue the manufacture of, change or modify design and/ or construction of any KTM product during the manufacturing
Series Way Ball Valve Threaded. SERIES 38 3-Way. Easy to Automate! See automated data sheets for pre-sized assemblies 38-TH-0025-XXX-T
This investment cast 3-way valve can be an economical option for flow patterns that normally require multiple 2-way valves. Available in L or T port configurations, this valve is excellent for diverting
Mark 630 Series. High Pressure Regulators Mark 630 High Pressure Regulators. High Pressure Regulators. Features
Mark 630 Series High Pressure Regulators The Jordan Mark 630 self-operated pressure reducing regulator is designed to provide tight shutoff and accurate regulation on high pressure gas systems. It can
BERMAD Waterworks. Combination Air Valve. Air Valves Series. Typical Applications. Features & Benefits. Additional Features.
BERMA Waterworks Combination Air Valve Model C7 BERMA C7 is a high quality combination air valve for a variety of water networks and operating conditions. It evacuates air during pipeline filling, allows
Serie 06-M6. Swing wafer check valve. made in. Application fields. Check valves E U R O P E WATER CONDITIONING INDUSTRY
Swing wafer check valve BRANDONI made in E U R O P E Application fields WATER CONDITIONING INDUSTRY HEATING 38 www.brandoni.it The valves in series 06 are swing wafer check valves, manufactured in accordance
SV5 Safety Valve Installation and Maintenance Instructions
3120036/3 IM-S13-12 CH Issue 3 SV5 Safety Valve Installation and Maintenance Instructions 1. General specification 2. Supply 3. Before fitting the valve 4. Installation 5. Damage prevention 6. Commissioning
Meter, PD Model T-11 and T-11NF Parts List
Form No. P0565.11 Meter, PD Model T-11 and T-11NF Parts List Issue/Rev. 1.1 (9/11) Bulletin P0565.11 The Most Trusted Name In Measurement Item G Description Calibrator Version Qty. Part Number Item Description
Spilt body Flange ball valve. TC-205MFF-PN1640 User Manual English Version. Document No: TC-205MFF-PN1640.Ur-manual. Date: 2007/04/2617. Version: 1.
Spilt body Flange ball valve TC-205MFF-PN1640 Series PED Category I,II TC-205MFF-PN1640 User Manual English Version Use for company in Europe who will place the product on the market, please amend which
gpphighpressure.com (417) BALL VALVES *Dimensions are subject to change and are considered reference.
LL VLVS 51 *imensions are subject to change and are considered reference. 2 1 TURS & NITS O PP LL VLVS Trunnion style ball valves w/positive shut-off in 10,000-15,000-psi (689-104-179 bar) esigned for
PTF4 Pivotrol Pump (patented) version Dual Mechanism - Pressure Powered Pump
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
FLANGED MULTI-PORT BALL VALVES
INTRODUCTION This instruction manual includes installation, operation and maintenance information for flanged multi-port ball valves. This manual addresses lever operated ball valves only. Please refer
Meter, PD Series, E3 S1 and E4 S to Present Parts List
Issue/Rev. 0.0 (2/13) Meter, PD Series, E3 S1 and E4 S1 2005 to Present Parts List Bulletin PO01002 9 35 3 39 53 55 57 56 52 54 26 32 37 25 68 48 38 The Most Trusted Name In Measurement 5 31 7 44 42 16
REPAIR PART NUMBER NUMBER DESCRIPTION 0137 ELE 0136 ELE 12 VOLT SOLENOID
PART REPAIR PART NUMBER NUMBER DESCRIPTION 0137 ELE 0136 ELE 12 VOLT SOLENOID 0203 WHL 0250 WHL WHEEL HUB 0251 WHL AXLE 0252 WHL DUST CAPS 0253 WHL TIRE - 210 SP 0204 WHL 0211 WHL TIRE & WHEEL - SP 0250
Line Blind Valves. Double Block and Bleed Cargo Segregation API 607. Fire Safe Certified
Year : API 0 Fire Safe Certified New Innovative Patented Design Page Year : Introduction Easy to operate and reliable in use. Applications Crude oil product (Tankers) Chemical Tankers. LPG and LNG carriers.
3-PIECE BALL VALVE, 3600 PSI/ PN 248, WITH ISO DIRECT MOUNTING PAD 306M SERIES/ PED Category II
3-PIECE BALL VALVE, 3600 PSI/ PN 248, WITH ISO DIRECT MOUNTING PAD 306M SERIES/ PED Category II 306M User Manual English Version Use for company in Europe who will place the product on the market, please
756 Safety Relief Valves
756 S a fe t y R e l i e f Va l ve s INTRODUCTION 756 Safety Relief Valves The effects of exceeding safe pressure levels in an unprotected pressure vessel or system, can have catastrophic effects on both
KTM OM-2 SPLIT BODY FLOATING BALL VALVES INSTALLATION AND MAINTENANCE INSTRUCTIONS
Before installation these instructions must be fully read and understood SECTION 1 - STORAGE 1.1 Preparation and preservation for storage All valves should be properly packed in order to protect the parts
High Pressure Cylinder Valves
High Cylinder Valves CBA series Commercial and POL Style Acetylene Cylinder Valves O-Ring seal type 8 CBO series Vertical Outlet Acetylene Valve with Handwheel for Collar Style Cylinders 9 CBH/CBI series
BALL VALVE ASSEMBLY AND MAINTENANCE PROCEDURE FOR LCV BALL VALVES REF. DOC. MMM LCVE Rev.0 July 2010 SERIES SFF & SFR.
SERIES SFF & SFR SFF / SFR EN/ANSI/ASME/API/BS/NF SFF EN/DIN/BS/NF Page 1 of 16 REVIEW CONTROL PROCEDURE REF.: DOC. MMM LCVE REV. DATE CARRIED OUT BY APPROVED BY DESCRIPTION 0 19/07/2010 J. Rubio J.Tejedor
VSD03M DIRECTIONAL CONTROL VALVES
NFPA SIZE D03 TYPICAL PERFORMANCE SPECIFICATIONS Performance is measured on a four-way circuit (full circuit). Performance may e reduced from that shown if a three-way circuit (half circuit) is used, i.e.
Sensor FL1000 Instruction manual
Apator Powogaz S.A., ul. Klemensa Janickiego 23/25, 60-542 Poznań, Poland tel.: +48 61 84 18 101, fax: +48 61 84 70 192 www.apator.com Sensor FL1000 Instruction manual ISO 9001 PN-N-18001 ISO 14001 INTRODUCTION
BALL VALVE ASSEMBLY AND MAINTENANCE PROCEDURE. REF. DOC.MMM900N Rev.1 March 2014 SERIES M DIN / ANSI. Page 1 of 17
SERIES M DIN / ANSI Page 1 of 17 REVIEW CONTROL PROCEDURE REF.DOC.MMM900N REV. DATE CARRIED OUT BY APPROVED BY DESCRIPTION 0 12/05/2013 E.Hidalgo J.Tejedor Initial Edition 1 27/03/2014 D.Grau J.Tejedor
Parts List for Type S Flowmeters
P101 Rev. C Type S Flowmeter Parts List: 5/8" 2" Type S Flowmeters Parts List for Type S Flowmeters 5/8" and 3/4" Type S Flowmeters with 100 and 600 Series Register and Internal Gear Train 28 3.0, 3.1
INSTALLATION, MAINTENANCE & OPERATING INSTRUCTIONS 2-4 REDUCED PORT/ FULL PORT (5700/6700) ANSI CLASS 150/300/600/900/1500/2500 TRUNNION BALL VALVES
PBV-USA,Inc. 12735 Dairy Ashford. Stafford, Texas USA 77477 281-340-5400; 800-256-6193 FAX: 281-340-5499 INDUSTRIAL BALL VALVES IM0 69 April 2001 Rev 9 INSTALLATION, MAINTENANCE & OPERATING INSTRUCTIONS
PRESSURE REGULATORS UPSTREAM DIFFERENTIAL PRESSURE. APPLICATION: For maintaining a constant differential pressure across meter.
PRESSURE REGULATORS UPSTREAM DIFFERENTIAL PRESSURE APPLICATION: For maintaining a constant differential pressure across meter. PRESSURE RANGE: Steel: 10 psig to 300 psig CAPACITY: Refer to Table of Contents.
OPERATING AND MAINTENANCE MANUAL ALFA SPLIT BODY TRUNNION MOUNTED BALL VALVES Model ALFA T2 (Valid for S.B. valves both for D.B.B.
Doc. Nr. MMT2 Rev.9 EN Sheet 1 of 14 ALFA Model ALFA T2 (Valid for S.B. valves both for D.B.B. valves) INDEX PAGE 0. Technical Data 2 1. Transportation, handling and storage 3 2. Installation instructions
Form No. P Meter, PD Series H8-S3 Flat Plate Cover Parts List
Form No. P0550.50 Meter, PD Series H8-S3 Flat Plate Cover Parts List Issue/Rev. 0.0 (10/04) Bulletin P0550.50 The Most Trusted Name In Measurement Inner Mechanism Page P0550.50 Issue/Rev. 0.0 (10/04) Item
Meter, PD Series H8-S1, S3, S5, S6, & S7 Parts List
Meter, PD Series H8-S1, S3, S5, S6, & S7 Parts List Issue/Rev. 0.0 (1/14) Bulletin PO01010 S1 S3, S5, S6, S7 The Most Trusted Name In Measurement Inner Mechanism Page 2 PO01010 Issue/Rev. 0.0 (1/14) Item
Pibiviesse High Performance Control Ball Valve
Pibiviesse High Performance Control Ball Valve Sizes 2 to 48 Pressure rating up to ANSI 2500# Anti-cavitation and low noise trim available High turndown High rangeability Unique self-cleaning effect Single
OPTIONAL ADD-ON ITEMS TONGUE JACK KAYAK KIT KARAVAN T R A I L E R S TITLE: MAT'L: FINISH: DWG. #: KBE W/TORSION AXLE SEE B.O.M.
OPTIONAL ADD-ON ITMS TONGU JACK KAYAK KIT NOTS: ) DRAWING MAY B SHOWN WITH OPTIONS THAT MAY NOT B ON ALL TRAILR MODLS. 54 MJH 0-- D 506 LJW 0-- ADDD KAYAK KIT OPTION DAT UPDATD ASSMBLY; ADDD DIMNSIONS
Technical data. Back pressure limit: 27.5% of set pressure. Capacity certification: ASME Boiler & Pressure Vessel Code Section I and VIII
VALVES & CONTROLS CROSBY SAFETY VALVES H ig h C a p a c it y, S t e a m S e r v ic e, F la n g e d S t e e l S a f e t y V a lv e Introduction Crosby Style HSL is a full nozzle reaction type safety valve
Parts Manual. Scraper Hitches PH:
Parts Manual Scraper Hitches 12-18 1 Table of Contents A123299 Swivel Hitch 3 A1063527 Super Swivel Hitch 4 A125056 Yoke Hitch 5 A125057 Super Capacity Hitch 6 A125223 MDU Hitch 7 A123224 360 Swivel Hitch
Meter, PD Series, E3 A1, S1 and E4 S1 Prior to 2005 Parts List
Issue/Rev. 0.0 (2/13) Meter, PD Series, E3 A1, S1 and E4 S1 Prior to 2005 Parts List Bulletin PO01001 33 Pre 1994 39 32 31 21 Pre 1994 45 18 48 44 30 78 57 46 Note: Angled housing not shown. The Most Trusted
Process Industry Practices Pipeline Systems
September 2013 Process Industry Practices Pipeline Systems PIP PLX03CS5S01 Pipeline Systems, ASME B31.8 Material Specification Inside Production, Well Site Facility, Class 300, Carbon Steel, 0.03125" (1/32
SEries 29 Hydrant valves installation, operation & maintenance manual
Instruction for use Thank you for selecting an AVK product. With correct use, it will give long and reliable service. This manual has been prepared to assist you install, operate and maintain the valve
K Page 1 of 48 Air Intake - Pg. 17
K532-53168 Page 1 of 48 Air Intake - Pg. 17 Ref # Part Number Qty Description 24 25 041 06-S 1 Gasket, elbow 25 48 054 09 1 Elbow, air cleaner Discontinued not available at Kohler Co. 35 277116-S 1 Brace,
SpeciÞcations. Engine Dimensions Dimensions in millimeters. Inch equivalents shown in [].
![SpeciÞcations. Engine Dimensions Dimensions in millimeters. Inch equivalents shown in [].](/thumbs/77/75006228.jpg "SpeciÞcations. Engine Dimensions Dimensions in millimeters. Inch equivalents shown in [].")
SpeciÞcations Engine Dimensions Dimensions in millimeters. Inch equivalents shown in []. Ê ßÔ Ê ÛÝ Ñ Ê Û ÎÊ Û É 5 ENGINE IDENTIFICATION NUMBERS Kohler engine identiþcation numbers (model, speciþcation
BERMAD Waterworks. Level Control Valve with Altitude Pilot. 700 Series. Model X. Features and Benefits. Major Additional Features
Level Control Valve with Altitude Pilot High level reservoirs & water towers Energy cost critical systems Systems with poor water quality Inherent refreshing Level sustaining at reservoir outlet The Level
ASSEMBLY INSTRUCTIONS
XR 9-2009:new odc 1018 revised 2/17/10 9:11 AM Page 1 ODC XR 9 OUTDOOR DISCOVERY CRAFT ASSEMBLY INSTRUCTIONS Your ODC XR 9 Pontoon Boat comes in two separate cartons consisting of the following parts:
Serie ECO 3T. Threaded end back flow preventer with controllable reduced pressure zone. made in. Application fields. Protection E U R O P E
Serie ECO T Threaded end back flow preventer with controllable reduced pressure zone BRANDONI made in E U R O P E Application fields WATER FIRE FIGHTING DRINKING WATER 74 www.brandoni.it Serie ECO T The
Materials : Carbon steel ASTM A216 WCB
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 400 ( NPS 2" to 16" ) Flanges R.F. Class 150 (PN20) - 29 C + 425 C Max Pressure : 20 Bars Specifications : Removable stainless
Pipeline Systems PIP PLSMV004 Carbon Steel Globe Valve Descriptions
November 2017 Pipeline Systems PIP PLSMV004 Carbon Steel Globe Valve Descriptions PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice
Smith Meter PD Meter Meter, PD Series, F4 S6, S7. Parts List Bulletin PO01012 Issue/Rev 0.0 (7/13)
Smith Meter PD Meter Meter, PD Series, F4 S6, S7 Parts List Bulletin PO01012 Issue/Rev 0.0 (7/13) 17 34 71 71 19 33 21 71 58 35 68 25 26 10 44 60 59 61 24 55 54 57 16 14 29 36 28 42 70 48 27 41 32 6 47
PIP PN03SA0S01 Piping Material Specification 3SA0S01 Class 300, 304/304L Stainless Steel, Socket Weld, C.A., Process
May 2016 Piping PIP PN03SA0S01 Piping Material Specification 3SA0S01 Class 300, 304/304L Stainless Steel, Socket Weld, 0.000 C.A., Process PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to
AIR AND VACUUM VALVES
MINING DIVISION AIR AND VACUUM VALVES FOR HIGH FLOW K-6NS SERIES DESCRIPTION The K-6NS Series Air and Vacuum Valve discharges air during the filling or charging of the system and admits air into the system
INSTALLATION, OPERATION and MAINTENANCE MANUAL
INSTALLATION, OPERATION and MAINTENANCE MANUAL TRUNNION MOUNTED BALL VALVE NEXTECH I ValvTechnologies, Inc. 5904 Bingle Road Houston, Texas 77092 U.S.A. Email: sales@valv.com www.valv.com 705_Nextech IOM
Ersatzteilliste. Düsenwagen R 30
Ersatzteilliste Düsenwagen R 30 Beinlich Agrarpumpen und maschinen GmbH Eifel-Maar-Park 16 D 56766 Ulmen Tel.: 02676 9516-0 - Fax: 02676 951615 www.beinlich-beregnung.de info@beinlich-beregnung.de Beinlich
APPENDIX A MAIN ASSEMBLIES
32 Gorski G2000SS Diving Helmet Technical Manual APPENDIX A MAIN ASSEMBLIES MANIFOLD BODY ASM SEE APPENDIX C 25 ft.lbs (34 Nm) 22 SS Blank Plug INNER 90 in.lbs COMPONENTS (10 Nm) INNER COMPONENTS SEE APPENDIX
CV08-20 Check Valve DIRECTIONAL VALVES. DESCRIPTION A screw-in, cartridge-style, hydraulic check valve for use as a blocking or load-holding device.
DIRECTIONAL VALVES CV08-20 Check Valve DESCRIPTION A screw-in, cartridge-style, hydraulic check valve for use as a blocking or load-holding device. OPERATION The CV08-20 allows flow passage from 1 to 2,
INSTRUCTION MANUAL FOR UNDERWATER OPERATION
INSTRUCTION MANUAL FOR UNDERWATER OPERATION FOR HYDRAULIC HAMMER MODELS: GH7, GH9, GH10, GH12, GH15, GH18, GH23, GH30, GH40, GH50, E208, E210A, E213, E216, E220, E225, E240A, E260A Use Genuine NPK Parts
Parts Manual STRIKER Striker 2840 Parts List - PN Printed in USA 03/18/08
Parts Manual STRIKER 2840 Striker 2840 Parts List - PN 238155 - Printed in USA 03/18/08 Standard Parts Recommended General Wear Parts Ref No Part Description Qty Part No 1 Squeegee Hose Assembly
Replaces Lesco 300 & 500 Parts Cutting Unit
Replaces Lesco 300 & 500 Parts 3A 11 10 10 11 17 3 1 15 2 13 1 20 1 20 1 21 2 2 22 1B 30 1A 10 14 31 25 23 24 10 4 27 23 25 26 14 24 10 13A 5 5A 4A 16 0 R&R Reels Available, Lifetime Guaranteed 1 R50271
Pressure Regulating Valves. Models 44, 77 & 68 PS\ UL. Pressure Relief Valve. Dorot Fire Protection Division. Certification & compliance by design
Fire Protection Div. Dorot Fire Protection Division Models, & 6 PS\ UL Pressure Relief Valve Certification & compliance by design -PS\UL ANSI FCI - Class VI seat leakage class Fire tested to EN ISO 6-:6
Ball Float Steam Trap UNA 43 PN 16/CL 125/JIS 10K UNA 46 PN 40/CL 150/CL 300/JIS 10K/JIS 20K DN 80, 100, 150, 3", 4", 6"
Data Sheet 819584-00 Issue Date: 01/17 Ball Float Steam Trap UNA 43 PN 16/C 125/JIS 10K UNA 46 PN 40/C 150/C 300/JIS 10K/JIS 20K DN 80, 100, 150, 3", 4", 6" UNA 43 hl, UNA 46 hl UNA 43 v, UNA 46 v with
BCV31 DN20 - Blowdown Control Valve
4034650/8 IM-P403-37 AB Issue 8 BCV31 DN20 - Blowdown Control Valve Installation and Maintenance Instructions 1. Safety information 2. Application 3. Technical data 4. Operation 5. Installation 6. Flow
E N G I N E E R E D V A L V E S. GROVE G12 Through Conduit Gate Valve GROVE
G12 Through Conduit Gate Valve TABL O CONTNTS G12 TROUG CONDUIT GAT VALV The Company 2 Applications 2 General Information 2 Design eatures 3 Optional eatures 6 Special Applications 8 Materials Specification
Serie ECO 3F. Flanged back flow preventer with controllable reduced pressure zone. made in. Application fields. Protection
Flanged back flow preventer with controllable reduced pressure zone made in Application fields WATER FIRE FIGHTING DRINKING WATER 64 www.brandoni.it The ECO 3F flanged backflow preventers, which have a
Crosby style JCE Safety Valve Installation, Maintenance and Adjustment Instructions CROSBY
CROSBY Table of contents 1. Installation 1 1.1. Drainage 1 1.2. Discharge pipework 1 1.3. Preparation for installation 1 2. Pressure adjustment 1 3. Maintenance 1 4. Dismantling 1 4.1. All valve types
ASEPTIC SAMPLING VALVES SANITARY SAMPLING VALVES SANITARY SAMPLING BOTTLE TANK BOTTOM ASEPTIC VALVE
BOLLETTINO VSS-15 HigH purity Ball valves n FULL PORT The VSS ball valves are engineered to be a true process piping component to specifically meet the demanding processes found in pharmaceutical industries.
Chlorinator. MODEL C-731 (Floor Mounted)
Chlorinator MODEL C-731 (Floor Mounted) CHLOROTECH Model C-731 is the advance technology Chlorinator designed to feed chlorine gas at a controlled rate. The flow rate of gas is maintained by constant positive
Product Catalogue. Version 8.0. GSection. Hendrickson Suspension
Product Catalogue GSection Version 8.0 Hendrickson Suspension Section G Air Suspension Components Hendrickson HTE Suspension G:28 PRODUCT CATALOGUE 8.0 Hendrickson HTE Suspension - Part List Part No. Item
NAF-Trimball Control Ball Valves
NAF-Trimball Control Ball Valves Size DN 50-500, Size 2-20 PN 10 40, ANSI Class 150 and 300 Fk 41.65(9)GB 11.04 Primary characteristics The NAF-Trimball represents an entirely new approach for addressing
B-Too Drilling and Tapping Machine
Material Specifications Powered by hand or with Ridgid 690 (TM-29) High strength, modular aluminum and steel components Inserts any 3 /4" to 1" corporation stop under pressure Extracts threaded corporation
M45 ISO Ball Valve DN25 to 150 Installation and Maintenance Instructions
BAC 13310 IM-P133-42 ST Issue 2 M45 ISO Ball Valve DN25 to 150 Installation and Maintenance Instructions 1. General safety information 2. General product information 3. Installation 4. Commissioning 5.
Control Valve ZK 29. Original Installation Instructions
Control Valve ZK 29 Original Installation Instructions 810685-05 Contents Foreword... 3 Availability... 3 Formatting features in the document... 3 Shown and described types of equipment... 3 Safety...
SABERINDO PACIF SABERINDO PACIFIC CIFIC SABERINDO PA. A Tyco International Company
CIF A Tyco International Company 1 Foam Concentrate CIF 3% AFFF -UL Listed -UL Canada Listed 6% AFFF 6 parts AFFF concentrate to 94 parts water -UL Listed- Foam Liquid -UL Canada Listed 3% FLUOROPROTEIN
1. ABOUT THE PRODUCT:
1. ABOUT THE PRODUCT: a General Description: This Valve Mounted pressure controller is a yet solid one for direct mounting to the control valve and direct impulse connection for various pressures including
CV3000 Series Pressure Balanced High-Pressure Cage type Control Valves
OVERVIEW CV3000 Series Pressure Balanced High-Pressure Cage type Control Valves Model HPC Model HPC Pressure balanced high-pressure cage type Control Valves are design for high temperature, high pressure
Reduce pressure zone device suitable for high and medium hazard rated applications Flanged end connections
VALVCHEQ Backflow Preventers Reduce pressure zone device suitable for high and medium hazard rated applications Flanged end connections Features General application The RP03 provides protection from both
KEY PART KEY PART NO. NO. DESCRIPTION NO. NO. DESCRIPTION
1 874 78 04-10 Bolt, Fin Hex 1/4-20 x 5/8 12 532 13 09-86 Lens, LH 3 532 12 84-45 Bracket, Pivot Hood LH 13 532 13 09-84 Grille 4 819 09 10-16 Washer, Flat 1/4 21 532 12 69-38 Bumper, Hood 5 817 49 05-12
FILTERS. TANK CARE - Return filters TECHNICAL DATA ORDERING AND OPTIONS CHART CLOGGING INDICATORS. PRESSURE DROP ( p) CURVES CROSS FUNCTIONAL VIEW
ILTRS YRAULI IVISIO TAK AR - Return filters R TIAL ATA ORRIG A OPTIOS ART LOGGIG IIATORS PRSSUR ROP ( p) URVS ROSS UTIOAL VI SPAR PARTS ORRIG IORMATIO IMSIOS O T ILTR LMT ILTRS YRAULI IVISIO R TAK AR RTUR
SOFT SEAL PISTON VALVES
DV & VL SERIES VESSEL & REACTOR VALVES SOFT SEAL PISTON VALVES PROCESS VALVES SERIES DV, STANDARD RANGE Original Strahman Ram-Type Drain Valve FEATURES Quality System Registered to ISO 9001:2008 Certificate
HEAVY DUTY PNEUMATIC
HEAVY DUTY PNEUMATIC Series A4 MEDIUM DUTY HYDRAULIC Series H4 PERMANENTLY LUBRICATED HEAVY DUTY PNEUMATIC Series L4 586.778.7680 SERIES A4/L4/H4 39 A4/L4/H4 FEATURES 1 1 9 9 12 8 7 5 12 3 13 4 10 2 11
Technical Standard. API6D Ball & Plug Valve. Inspection & Test Procedure
Technical Standard API6D Ball & Plug Valve Inspection & Test Procedure 1 Scope This standard provides specific inspection items to be performed on all ball & plug valves. The valves shall be provided with
RB4000 Series Regulator Parts List. Effective February 2001
RB4000 Series Regulator Parts List Effective February 2001 RB4000 Reference Schematics 2 Note: See Reference Schematics. The following table provides the part numbers for each of the RB4000 spare parts
Water. VAG DUOJET Automatic Air Valve Single-chamber type PN 10/16/25/40 - DN KAT-A 1912
Water VAG DUOJET Automatic Air Valve Single-chamber type Product characteristics and benefits Resilient seated With flange end acc. to EN 1092-2 Single chamber air valve in compact design Very high discharge
VALVE MANUFACTURERS ASSOCIATION API 622 API 624
VALVE MANUFACTURERS ASSOCIATION API 622 API 624 Written by Rich Davis Manager Business Development Western Hemisphere & China Flexitallic L.P., Deer Park, Texas Presented By: Steve Butler, Shell Global
R133 HELYON. Brass high pressure regulator, suitable for compressed air, gas and liquid
R133 Brass high pressure regulator, suitable for compressed air, gas and liquid HELYON 5 Chemin du Jubin 6957 DARDILLY Tél. +33 () 7 5 16 7 - Fax +33 () 7 5 16 71 FEATURES High pressure regulator for cylinder
a division of Enviro Safety Products
www.minutemanvac.com, a division of Enviro Safety Products.800.637.6606 Chassis 3 4 5 3 4 6 7 8 5 0 0 6 8 0 7 4 3 5 6 7 E 7e www.minutemanvac.com, a division of Enviro Safety Products.800.637.6606 Page
MUELLER A A Non-Adjustable. Vertical Indicator Posts. Reliable Connections. General Information 2. Technical Data 3.
Installation Instructions manual MUELLER table of contents PAGE A-20808 General Information 2 Technical Data 3 Dimensions 4 A-20809 Non-Adjustable Installation 5-6 Parts 7 Maintenance 8 Vertical Indicator
VALVCHEQ BACKFLOW PREVENTERS FIGURE RP03
Reduce pressure zone device suitable for high and medium hazard rated applications Flanged end connections FEATURES GENERAL APPLICATION The RP03 provides protection from both backsiphonage and backpressure
Camaro/Firebird:
COMPLETE ASSEMBLIES: CAMARO/FIREBIRD Remote Slave Cylinder (RSC) 3.36/2.07/1.35/1.00/0.80/0.62 1023 6020 2.97/2.07/1.43/1.00/0.80/0.62 1023 6021 NOTE: These TWO (2) semblies WITHOUT ' skip shift'. 2.66/1.78/1.30/1.00/0.74/0.50
OPERATING AND MAINTENANCE MANUAL ALFA WAFER BALL VALVES Models ALFA 10N / 10NF / 103 / 10HP
Sheet 1 of 9 ALFA WAFER BALL VALVES Models ALFA 10N / 10NF / 103 / 10HP INDEX PAGE 0. Technical Data 2 1. Transportation, handling and storage 3 2. Installation instructions 3 3. Maintenance 5 4. Testing
No October, Eaton. Gear Pumps. Parts Information. Series 26 Model Single Gear Pumps
Eaton Gear Pumps No. 6-634 October, 1995 Parts Information Series 26 Model 26000 Single Gear Pumps Pump Parts Drawing Righthand (CW) pump rotation shown. 14b 17 11 4D 1 25 9 4A 10 4B 14a 40 Plug 3 7 13
WKM Model 320F Floating Ball Valve
Date: 4 WKM Model 320F Floating Ball Valve Installation, Operation, and Maintenance Manual 1 Date: 4 All the information contained in this manual is the exclusive property of Cameron. Any reproduction
Constant Pressure Crude Oil Container Model CPCCP
Installation, Operations, and Maintenance Manual Constant Pressure Crude Oil Container Model CPCCP The information in this manual has been carefully checked for accuracy and is intended to be used as a
Pneumatic Control Valve PV25 (EN)
DESCRIPTION The PV25 control valves are single seated, two-way body constructed with in-line straight connections. The PA pneumatic actuator is rubber diaphragm and multisprings. Its action can be DA -direct
WHEATLEY WHEATLEY SERIES 500 SWING CHECK VALVE. Installation, Operation and Maintenance Manual
WHEATLEY SERIES 500 SWING CHECK VALVE STANDARD INTEGRAL SEAT & OPTIONAL REMOVABLE SEAT 2" FP - 6" FP 150# - 1500# 8" FP - 12" FP 150# - 900# API 6D and B16.34 2" FP - 4" FP 5000# DRILLING PRODUCTION VALVE