P-Series, Lightweight Hand Pumps. Exclusively from Enerpac. 70
|
|
- Patricia Hensley
- 5 years ago
- Views:
Transcription
1 -eries, ightweight and umps umps shown, from top to bottom: -802, -842, -202, -142 xclusively from nerpac ylinder Matching hart For help in selecting the correct hand pump for your application, please refer to the ylinder Matching hart located in the Yellow ages. 276 peed hart To determine how a specific pump will operate your cylinder, see the ump/ylinder peed hart in the Yellow ages. 283 ightweight and compact design urable glass-filled nylon reservoir and nylon encapsulated aluminum pump base for maximum corrosion resistance Two-speed operation on most models reduces handle strokes by as much as 78% over single speed pumps ower handle effort to minimize operator fatigue Integral 4-way valve on -842 for operation of double-acting cylinders andle lock and lightweight construction for easy carrying arge oil capacities to power a wide range of cylinders or tools on-conductive fiberglass handle for operator safety Internal pressure relief valve for overload protection Tank Kits When a return-to-tank port is required, the Tank Kits provide a port at the rear of the reservoir. Fits -141, -142 Fits -202, -391, -392 X-101 and ump medium viscosity oil specially formulated for hand pumps. erforms well in low temperatures and requires less pumping effort than standard nerpac F blue oil in action with R-256 cylinders. ump Type ingle speed Two speed Usable ** ** *** ressure * 70 isplacement per troke 1 st stage 2 nd stage 1 st stage 2 nd stage / / / / Max. andle ffort * ontact nerpac for applications where operating pressure is less than 10% of pressure rating. ** vailable as set, see note on top of next page. *** For use with double-acting cylinders
2 ump and ylinder ets umps marked with an ** are available as sets (pump, cylinder, gauge, couplers and hose) for your ordering convenience. 52 ightweight and umps eries Release valve , -142, , -392 Reservoir : in 3 G -141, -142, -202, -391, -392 Release Valve 50 M Flow at Rated ressure: in 3 /stroke Maximum Operating ressure: psi oses nerpac offers a complete line of high-quality hydraulic hoses. To ensure the integrity of your system, specify only genuine nerpac hydraulic hoses. G Q Valve ontrol 50 G45G Gauge daptor rotect yourself from system overloading by simply ordering one part number for a pre-assembled gauge, adaptor block and coupler G Q luminum Reservoir For applications where composite reservoirs may not be suitable, the -392 utilizes an extruded aluminum reservoir. lso included is a second handle for two-hand use. ontact nerpac for details. iston troke imensions G M Q ¼"-18 TF ⅜"-18 TF ¼"-18 TF ¼"-18 TF ⅜"-18 TF ⅜"-18 TF ⅜"-18 TF ** ** *** 71
3 -eries, UTIM teel and umps hown from left to right: -77, -80, -84, -801, -39 The olution for Tough obs Two peed umps Recommended for applications where cylinder plunger must advance rapidly to contact load, and applications where greater oil capacities are required, such as multiple cylinder hook-ups. Reduced handle effort and ergonomic grip for less operator fatigue Two-speed operation for fast and easy operation (except -39) Vent free reservoir eliminates spills Quick grip handle allows for easy transport Integral reservoir over-pressurization protection ll steel construction, chrome plated plunger and wiper system for durable, long lasting performance 4-way valving on the 84 and -464 for operation of double-acting cylinders In the absence of a power supply, the -80 and ump offers a powerful solution. Foot ump onversion Kits onvert your 39, 77, 80, or 801 to foot power with the -11 Kit. Includes instructions for easy conversion. G45G Gauge daptor rotect yourself from system overloading by simply ordering one part number for a pre-assembled gauge, adaptor block and coupler Way ontrol Valve -84 and -464 feature a manual 4-way control valve, designed for use with one double-acting or two singleacting cylinders. For system set-up information: 278 ump Type Usable ressure * isplacement per troke 1 st stage 2 nd stage 1 st stage 2 nd stage Max. andle ffort ingle ** / / Twospeed *** *** * ontact nerpac for applications where operating pressure is less than 10% of pressure rating. ** vailable as a set, see note on next page. *** For use with double-acting cylinders. 72
4 teel and umps eries 3 /8"-18TF Reservoir : in 3-39, -77 Flow at Rated ressure: in 3 /stroke Maximum Operating ressure: psi ⅜"-18TF 6.93 (-801 only) T Q ⅜"-18TF F xtra and umps -462 and -464 feature extra-large reservoirs and a high first-stage flow rate. These pumps are ideally suited for powering high-capacity cylinders. -80, -801, -84 ump and ylinder ets 3 /8"-18TF is also available as a set (pump, cylinder, gauge, couplers and hose) for your ordering convenience. -462, -464 M R Q 52 ylinder Matching hart For help in selecting the correct hand pump for your application, please refer to the ylinder Matching hart located in the Yellow ages. 276 iston troke imensions F M Q R T ** *** *** 73
5 -eries, ow ressure and umps hown from left to right: -25, -51, -18 When ess Than psi is ll You eed -25 and -50 pump oil in both forward and reverse handle movement improving overall efficiency, ideal when mounting space is restricted xternal load-release valve Internal pressure-relief valve for overload protection -51 can be operated in horizontal and vertical position with pump head and oil outlet facing downwards X-101 and ump medium viscosity oil specially formulated for hand pumps. erforms well in low temperatures and requires less pumping effort than standard nerpac F blue oil. 136 G45G Gauge daptor rotect yourself from system overloading by simply ordering one part number for a pre-assembled gauge, adaptor block and coupler. -18 hand pump used for locking the rotating table for marble polishing. 144 ump Type Usable ressure isplacement per troke Max. andle ffort inglespeed ,850 2,500 5,000 3,
6 ow ressure and umps eries /8"-18TF Reservoir : 18- in 3 Flow at Rated ressure: in 3 /stroke Maximum Operating ressure: 2,500-5,000 psi 34 M 90 1/4"-18 TF oses nerpac offers a complete line of high-quality hydraulic hoses. To ensure the integrity of your system, specify only genuine nerpac hydraulic hoses , -50 M 180 3/8"- 18TF hand pumps used with R-series cylinders to keep wooden layers under pressure during lamination of plates. iston troke imensions M
7 ightweight ydraulic Foot ump hown: -392F eries Reservoir : 38 in 3 Flow at Rated ressure:.151 in 3 /stroke Maximum Operating ressure: psi ump and ylinder ets The -392F is available as sets (pump, cylinder, gauge, couplers and hose) for your ordering convenience. 52 Robust, durable and compact - teel frame for maximum stability - teel pumping handle - luminum reservoir Foot pedal lock and lightweight construction for portability Two-speed operation reduces foot pedal strokes arge foot-pad release valve for controlling load descent Internal pressure relief valve for overload protection oses nerpac offers a complete line of high-quality hydraulic hoses. To ensure the integrity of your system, specify only genuine nerpac hydraulic hoses F offers the advantage of handsfree operation to handle and control the tool or cylinder. Release valve 3/8"-18TF Usable ressure isplacement per troke Max. andle ffort F * * vailable as set, see note on this page st stage 2nd stage 1st stage 2nd stage iston troke
8 xtreme nvironment roducts hown from left to right: -142, -392, V-152V, V-66V, R256V, R-106V, R-53V R,, V eries ylinder : 5-25 tons troke: 2-6 inches Maximum Operating ressure: psi orrosion resistant, nickel-plated valves and cylinders tainless steel pump inserts will not corrode Viton eals provide heat and chemical resistance nodized aluminum pump reservoirs and plastic encapsulated pump bodies resist wet environments Two-speed operation reduces pump handle strokes 78% compared to single-speed pumps ump handles lock for easy carrying pplications Use nerpac xtreme nvironment roducts in wet environments such as food processing, pulp and paper, mining, construction and applications in high temperature or in welding areas. Multifluid and umps M-eries corrosion resistant hand pumps for low pressure filling and high pressure testing applications, suitable for a wide range of fluids. 77 YIR RT ylinder troke * ressure ollapsed eight xtended eight Outside iameter (ton) R-53V R-102V R-106V R-256V UM RT ump Type * Two peed VV RT Valve Type ressure / / * isplacement per troke / / ressure Function ort imension 1/4"-18 nptf 3/8"-18 nptf iston troke ressure Manual heck Valve ressure Relief Valve V-66V V-152V heck +- 3% Repeatability * For cylinder details see pages 7-9; for pump details see pages 70-71; for valve details see pages
The Enerpac Lightweight Aluminum Cylinders
The nerpac Lightweight luminum s Shown: RC, RCL, RC, and RR R : 20-150 tons - inches Lightweight, easy to carry and position to allow a higher cylinder capacity-to-weight-ratio Non-corrosive by design,
More informationReservoir End Covers Type EC
Other Reservoir ccessories imensions / Technical ata / Order odes Reservoir End overs Type E H Ø2 Ø1 7 Gauge Steel haracteristics Materials End cover made of 7 Grade Steel (pickled and oiled); Stainless
More informationHI-PRESS HYDRAULICS Ltd
-, Low Profile renches hown: units with interchangeable cassettes Rigid teel Design The Professional Low Profile olution implicity Includes handle to improve tool handling and safety. No tools are needed
More informationViking Xtreme Manual Valves Air Control Valves
atalog 0697 Viking Xtreme anual Valves ir ontrol Valves The Viking Xtreme anual valve range is robust, versatile and combines high performance with compact installation dimensions. The valves rugged lever
More informationModel 7989T Steel Pipe Squeezer Sch. 40 & Sch. 80. Operations Manual
10-12 Steel Pipe Squeezer Sch. 40 & Sch. 80 Operations Manual 1.0 Introduction This manual is issued as a basic operation manual covering the Regent Model 7989T, Pipe Squeezer and Pump as manufactured
More informationBinks SG-2 Plus TM 2 QT. PRESSURE CUPS Model No (Standard) Model No (with OscillatingAgitator)
INTRODUCTION Binks SG-2 Plus TM Pressure Cup is ideal for component spraying and industrial applications where small batch production spraying is required. The 2 qt. capacity is sufficient to complete
More informationE 212 E 222 Tank top mounting Connection up to G1¼ / -20 SAE Nominal flow rate up to 220 l/min / 58.1 gpm
Return Filters E E Tank top mounting Connection up to G¼ / - SE up to l/min / 8. gpm Description pplication In the return line circuits of hydraulic systems. erformance features rotection against wear:
More informationStandard Operating and Maintenance Instructions for Pumping System Model PS-150
Standard Operating and Maintenance Instructions for Pumping System Model PS-150 High Pressure Equipment Company, LLC 2955 West 17th Street, Suite 6 PO Box 8248 Erie, PA 16505 USA 814-838-2028 (phone) 814-838-6075
More informationADAPTABILITY & PRECISION
ADAPTABILITY & PRECISION CALIBRATION GAUGES FOR CHEMICAL INJECTION SYSTEMS by KENCO FEATURING NEW AccuRate PRECISION PUMP SETTING GAUGE visit our online business center at: www.kenco-eng.com 2 AccuRate
More informationACME Connectors and Fittings Extended Type Hose Couplings for Vapor and Liquid Service A7571 and A7575 Series
M onnectors and Fittings xtended Type Hose ouplings for Vapor and Liquid Service 7571 and 7575 Series esigned especially for liquid filling and vapor equalization of LP-Gas and anhydrous ammonia. The limited
More informationPneumatic Function Fittings Metric & Inch
Metric & nch Sensor Fitting Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage Simpler pneumatic systems liminates need for electrical reed switches
More informationStandard Operating and Maintenance Instructions for Pumping System Model PS-90
Standard Operating and Maintenance Instructions for Pumping System Model PS-90 High Pressure Equipment Company 2955 West 17th Street, Suite 6 PO Box 8248 Erie, PA 16505 USA 814-838-2028 (phone) 814-838-6075
More informationLogic Elements Screw-in Cartridge Valves Pressures to 290 bar (4200 psi) Flows to 303 l/min (80 USgpm)
Vickers artridge Valves Logic Elements Screw-in artridge Valves Pressures to 9 bar ( psi) Flows to l/min (8 USgpm) Revised 9/98 7 ontents MODEL DESRIPTION TYPIL PPLITION PRESSURE bar (psi) RTED FLOW l/min
More informationDirectional Controls
Vickers Directional Controls Lever Operator Directional Control Valves DG17S-8-**-10 DG17S4-10 **-50 NF D08/D10, ISO-4401-08/10 Released 5/94 681 able of Contents General Information..................................................................................
More informationAirHawk SCBA. Now available with MSA s Advantage 4000 Facepiece
AirHawk SCBA Now available with MSA s Advantage 4 Facepiece Lightweight, durable, and economical SCBA 5for industrial applications. The AirHawk SCBA provides respiratory protection solutions for many varied
More informationDescription Advanced Features Typical Applications
Series single stage, brass barstock line regulator Description Advanced Features Typical Applications The Series regulators are intended for secondary pressure control of noncorrosive, high purity or liquefied
More informationIFP C175-* REMOTE CONTROL RELIEF VALVE
IFP C175-* REMOTE CONTROL RELIEF VLVE Low Pressure Differential Quiet Operation Easy to djust Handle Three Pressure Ranges vailable Panel Mount Design P T Model Pressure Range (PSI) Rated Flow (US GPM)
More informationPneumatic Hand Pumps with no Gauge Connection (scissor handle) AP0V (300 psi / 20 bar)
Pneumatic Hand Pumps with no Gauge Connection (scissor handle) AP0V (300 psi / 20 bar) The quickest and most economical way to perform pneumatic field pressure calibrations on pressure transmitters, switches
More informationInstruction sheet for Hydraulic Cylinder
Oper at or smanual 1088710891 Hydr aul i ccyl i nder s Instruction sheet for Hydraulic Cylinder NOTE PLEASE READ AND FOLLOW THIS INSTRUCTION BEFORE YOU USE Yellow Jackit CYLINDERS. Carefully inspect all
More informationFluid Dispensing Systems H O S E R E E L S H O S E S HOSE REELS
Fluid Dispensing Systems H O S E R E E L S H O S E S HOSE REELS HOSE REELS SIGNATURE SERIES H O S E S R E E L S FEATURES & BENEFITS Eight position locking precision die cast latch mechanism, with secure
More informationFor Low Temperature Service
42 eries Lever / edal Valves 4-Way, -ort, 2 & -osition or Low emperature ervice atalog 060- asic Valve unctions Lever Valves arallel & erpendicular Operated 2-osition, pring Return Lever arallel & erpendicular
More informationInflatable Packer Single & Double. Single & Double Packer Dimension. Wireline Packer. Water Testing Packer (WTP) Packer
Inflatable Packer Single & Double Single & Double Packer Dimension Wireline Packer Water Testing Packer (WTP) Packer Packer Working Pressure & Depth Chart Packer Water Hand Pump Packer Air Driven Pump
More informationREV0709. Parts List. Hydraulic Cylinder Model MODEL C SINGLE-ACTING, SPRING RETURN HYDRAULIC CYLINDER. Max. Capacity: 55.2 Tons at 10,000 PSI
REV0709 Parts List Hydraulic Cylinder Model 10312 MODEL C SINGLE-ACTING, SPRING RETURN HYDRAULIC CYLINDER Max. Capacity: 55.2 Tons at 10,000 PSI REV0709 Item No. Part No. No. Req d Description 1 10606
More informationAir Operated Hydraulic Pumping Systems to 50,000 psi
High Pressure Equipment Air Operated Hydraulic Pumping Systems to 50,000 psi PS-10: 10,000 psi PS-20: 20,000 psi PS-30: 30,000 psi PS-40: 40,000 psi PS-50: 50,000 psi PS-90: 90,000 psi High Pressure air
More informationVEP-HDSERIES INTERCHANGE > Stucchi VEP profile
V-HSRIS INRHAN > Stucchi V profile HNIAL AURS AN OIONS SUHI SOLUIONS Interchange Stucchi V profile Sealing description Nitrile NR onnection system Screw HL version= lock system Available sizes Material
More informationMultiple Connection Manifolds
ultiple onnection anifolds PNUAYN, IN. atalog 2400 Phone 763-559-0177 ax 763-559-0547 eatures l 2 to 10 stations l Inline anifolds, 90 anifolds, ual Air, unction locks and Terminal locks l ustom designs
More informationGas Cylinder Storage Structures
Gas Cylinder Storage Structures O These Heavy Duty Storage Structures Provide Galvanized Steel Floors Ensuring Cylinders Will Be Stored On A Level, Dry Surface $ 15,976.00 Order No: L62-3117 Custom Designs
More informationVEP-HDSERIES INTERCHANGE > Stucchi VEP profile
V-HSRIS INRHAN > Stucchi V profile HNIAL AURS AN OIONS SUHI SOLUIONS Interchange Stucchi V profile Sealing description Nitrile NR onnection system Screw HL version= lock system Available sizes Material
More informationDesiccant Air Breathers DBE. Section 3: TNK SCHROEDER INDUSTRIES ACCESSORIES 21
Desiccant Air Breathers DBE Section 3: SCHROEDER INDUSTRIES ACCESSORIES 21 Reservoir Accessories A hydraulic systems reservoir can play a significant role in the ingression of contamination into the system.
More informationLoad Controls Screw In Cartridge Valves Pressures to 350 bar (5000 psi) Flows to 190 l/min (50 USgpm)
Vickers Cartridge Valves Load Controls Screw In Cartridge Valves Pressures to 50 bar (5000 psi) Flows to 90 l/min (50 USgpm) Rev. 2/99 722 Contents MODEL DESCRIPTION TYP. APPLICATION PRESSURE bar (psi)
More informationElectro-hydraulic Proportional Flow and Direction Control Valve
lectro-hydraulic control valve his valve uses a D solenoid in a traditional 4- way solenoid valve to create a solenoid valve capable of both direction switching and highspeed control. he lineup consists
More informationMiniature Venturi Vacuum Pump with 3-way Integral Solenoid Valve and Silencer
odular Venturi iniature Venturi Vacuum ump with 3-way Integral olenoid Valve and ilencer astvac ini eries: V01-60 V01-60/24vD-2 tandard ump: V01 astvac ini eries pumps are solenoid-controlled miniature
More information1800C & 1800C-HC Service Regulators
SB-855.8 800 & 800-H Service Regulators Maximum Pressure 5 PSIG 800 Regulator Information General Information The merican Meter Series 800 pressure regulators are designed for natural gas applications
More informationService Call: Vacuum Prevention System Testing on Category A and B Aerial Devices. Tools Required: 1. Atmospheric Vent Test Set (P/N )
Service Call: Vacuum Prevention System Testing on Category A and B Aerial Devices Tools Required: 1. Atmospheric Vent Test Set (P/N 488180) *An automotive vacuum test kit with various fittings to hook
More information42 Series. Pneumatic. Lever / Pedal Valves 4-Way, 5-Port, 2 & 3-Position. Section Q. Pneumatic
42 eries Lever / edal Valves 4-Way, -ort, 2 & -osition ection asic Valve unctions...2 42 eries asic Valve eatures... ommon art Numbers...4 odel Number Index... tacking anifold ystems...6 imensions Lever
More informationTube Puller CP/CPS series. Pullers designed with cutting edge technology
Q U A L I T Y T U B E T O O L S www.krais.com CP/CPS series Pullers designed with cutting edge technology Q U A L I T Y T U B E T O O L S w w w. k r a i s. c o m MAIN FEATURES All new CP collet type and
More informationIntroduction. Part one: Identify the Hydraulic Trainer Components
The University Of Jordan School of Engineering Mechatronics Engineering Department Fluid Power Engineering Lab Experiments No.4 Introduction to Hydraulic Trainer Objective: Students will be able to identify
More informationIndustrial Compression Style Fittings. Compression Fittings Compress-Align Fittings Brass Metric Compression Poly-Tite Fittings Hi-Duty Fittings
Industrial Compression Style Fittings Compression Fittings Compress-lign Fittings rass etric Compression oly-tite Fittings i-uty Fittings arker annifin Corporation Fluid System Connectors Otsego, I Industrial
More informationROUGHNECK II Pumpless Drain
SERVICE BULLETIN SB4027 Rev. K 08/18 For Used Oil Only ROUGHNECK II Pumpless Drain Model #4110-022 FOR USED OIL ONLY (Black) For Antifreeze Only Model #4110-023 FOR USED ANTIFREEZE ONLY (Green) Patent
More informationVariable Area Flow Meters
Variable Area Flow Meters Over sixty years of variable area meter expertise Brooks started designing and manufacturing variable area (VA) meters, also referred to as rotameters, in 1946. Now, with more
More informationGROUTEC SCOTT VICKERS. Grouting Equipment
GROUTEC SCOTT VICKERS Grouting Equipment SCOTT VICKERS manufacturers a range of cement and chemical grouting equipment including:- PUMPS - The Cement Grout Pumps are all diaphragm-type. These diaphragms,
More informationBeamex PG PRESSURE GENERATORS. Beamex PGM PGV PGC PGHH PGPH PGL
Beamex PG PRESSURE GENERATORS 97 Beamex PGM PGV PGC PGHH PGPH PGL Beamex PG pressure generators are portable hand-operated pressure generators and ultimate field calibration pumps 98 Calibration pumps
More informationVickers. Filters. Reservoir Vent Filters. Spin-on Air Filters & Adaptors. Rev. 3/98
Vickers Filters Reservoir Vent Filters Spin-on Air Filters & Adaptors Rev. 3/98 73 Introduction Prevent Airborne Ingression A key element of contamination control is reservoir vent filtration. Reservoir
More informationIndustrial Compression Style Fittings
Industrial Compression Style Fittings Compression Fittings Compress-lign Fittings rass etric Compression oly-tite Fittings i-uty Fittings arker annifin Corporation Fluid System Connectors Otsego, I Industrial
More informationMax. working pressure 3650 bar / 52,200 psi Max. flow up to 50 liters / minute Fully made of stainless steel I N N OVATO R S T H E O U R
O U R T H E C O M M I N N OVATO R S i S U C C E S S! I TM E N T, YO U R PORTABLE HIGH PRESSURE POWERPACk Max. working pressure 3650 bar / 52,200 psi Max. flow up to 50 liters / minute Fully made of stainless
More informationACCUMULATOR OPERATING & MAINTENANCE INSTRUCTIONS
ACCUMULATOR OPERATING & MAINTENANCE INSTRUCTIONS READ ALL INSTRUCTIONS PRIOR TO INSTALLATION AND OPERATION TO AVOID POSSIBLE INJURY Warning: Always consider any accumulator to contain pressure until proven
More informationE SERIES. Specification. E Series. Relief and Flow Control Valves O M O M EIC-H Model No. Description
4 Ω-1 Ω Series Proportional Electro-ydraulic This relief and flow control valve is an energy-saving valve that supplies the minimum pressure and flow necessary for actuator drive. Since this valve controls
More informationFlow Control Valves. 1 Description. 2 Symbols. Series MTKA, MTQA, MTCA 2.1 MTKA MTQA flow control valve. 1.1 MTKA flow control valve
Flow Control Valves Series MTK, MTQ, MTC MTQ... MTC... robust, uncomplicated, reliable these valves do not require maintenance. This lowers costs and reduces the risk of a system failure. can be provided
More informationThe Weldability Marker Range Designed For The Metal Working Industry
Peters House The Orbital Centre Icknield Way Letchworth Garden City Hertfordshire SG6 1ET Tel. +44 (0) 845 130 7757 The Weldability Range Designed For The Metal Working Industry Rollerball permanent paint
More informationCover headline. Cover subheadline. Check Valves
Check Valves Cover headline Direct and pilot operated check valve functions for applications up to 5 bar (5 psi) and 7 L/min (6 USgpm) Cover subheadline EATON Screw-In Cartridge Valves E-VLSC-MC-E December
More informationDNS. Monoblock directional control valves DNS - Directional control valve
Monoblock directional control valves DNS - Directional control valve DNS efore use, carefully read the GENERL INSRUCIONS FOR USE OF DIRECIONL CONROL VLVES 398SMD6I - 6--8 DNS echnical data Nominal flow
More informationSIMPLAIR PIPING TOOL. JXT Company
SIMPLAIR PIPING INGERSOLL-RAND SIMPLAIR PIPING With push-in fittings and lightweight anodized aluminum pipe, a SimplAir system provides ideal connection throughout your entire air distribution system.
More informationTHAT S WHAT WE CALL HEAVY LIFTING!
THAT S WHAT WE CALL HEAVY LIFTING! Enerpac High-Tonnage s HCL-2006, LPL-602, HCR-2006 Highest Level of Durability Reaching the Summit Edition: Substrate bonded multi-layer treatment Hardened surface resists
More informationTentec. Instruction Document. Mini Air Driven Pump Unit Model: HTT.627X Series. Part Identifier
Tentec Page 1 w w w. t e n t e c. n e t Instruction Document Mini Air Driven Pump Unit Model: HTT.627X Series HTT.6271 Maximum Working Pressure = 1500bar (21750 psi) HTT.6272 Maximum Working Pressure =
More informationSchroeder Check Test Point System
Perforated polyamide / kevlar hose, 2 mm ID, 5 mm OD, plastic dust cap. L in (mm) P (max) psi (bar) 6 (150) 10,000 (680) 12 (300) 10,000 (680) 24 (610) 10,000 (680) 36 (915) 10,000 (680) 48 (1220) 10,000
More informationDEWATERING PUMP SOLUTIONS. Pneumatic pumps
DEWATERING PUMP SOLUTIONS Pneumatic pumps PUMP UP YOUR BUSINESS A pneumatic pump is a great choice when failure is not an option. They re easy to use, safe and can handle almost anything you throw at them.
More informationTest pumps. Pressure sources. Good reasons for proper and reliable calibration
Test pumps Pressure is one of the most commonly measured quantities in engineering, which is why exact and reliable pressure measurement is especially important. However, the characteristics of the even
More informationPressure Control (and Check) Valve
Pressure ontrol (and heck) Valve PRSSUR OTRO (A ) VAV 50 to 80l/min 4Pa eatures qthis circuit control valve works as a sequence valve, unloading valve, and counter balance valve. waximum operating pressure
More informationNew Models! UX.1600 UX.20000
atalog No. 07105 Ultra Force Extended UX eries New Models! UX.1600 UX.000 Patent pending Reduce die construction costs ong stroke lengths Directly upgrade IO 750-10000 models Variety of attachable and
More informationTHE COMPACT LINE. Mobile power packs in convincing BAUER quality l/min 225 / 330 bar TOUGH RELIABLE WELL ESTABLISHED
THE COMPACT LINE Mobile power packs in convincing BAUER quality 100 140 l/min 225 / 330 bar TOUGH RELIABLE WELL ESTABLISHED COMPACT LINE mobile breathing air compressors for high demands Due to its legendary
More informationSize 10 (D05) p max 320 bar (4600 PSI) Technical Features. Technical Data. Port dimensions ZB10A(B) SMT_0019 ZB K -
ase late with with ressure Relief Valve for Serial lates ssemblies Z0 Size 0 (D05) p max 320 bar (4600 SI) echnical Features ank cover mounted base manifold for hydraulic power packs which require one
More informationVickers. Flow Controls. Flow Controls FN, F(C)G, FRG. Released 6/94
Vickers Flow Controls Flow Controls FN, F(C)G, FRG Released 6/94 685 Table of Contents FN03/06/10 Model Series Application Data...............................................................................
More informationInstruction Sheet 1.0 IMPORTANT RECEIVING INSTRUCTIONS 2.0 SAFETY. 2.1 Introduction. 2.2 Hydraulic Cylinder Safety Precautions (RT-Series)
Instruction Sheet POWERFUL SOLUTIONS. GLOBAL FORCE. L4211 Rev. A 09/17 RT-Series Multi-Stage Telescopic Hydraulic Cylinders Table of Contents Page 1.0 IMPORTANT RECEIVING INSTRUCTIONS... 1 2.0 SAFETY...
More informationLPK1230 Hydraulic Crimping Tool 12 ton
SPECIFICATIONS AND PARTS LPK1230 Hydraulic Crimping Tool 12 ton Serial Code FYB Read and understand all of the instructions and safety information in this manual before operating or servicing this tool.
More informationTONS! powerteam.com HEAVY LIFT CYLINDERS
NEW DESIGNS TONS! powerteam.com HEAVY LIFT CYLINDERS THE Precise MOST Positioning COMPREHENSIVE & ControlRANGE OF HIGH in a Responsive PRESSURE Package HEAVY LIFT CYLINDERS R_G SINGLE & DOUBLE ACTING,
More informationVP-PSERIES INTERCHANGE > Stucchi profile
VSERES NERHANE > Stucchi profile EHNAL EAURES AN OONS nterchange Stucchi profile Sealing description Nitrile NR onnection system Screw SUH SOLUONS Available sizes from /4 to Material /treatment arbon steel
More information6000 SERIES OF PNEUMATIC DEADWEIGHT TESTERS
6000 SERIES OF PNEUMATIC DEADWEIGHT TESTERS USER MANUAL -1- SI-BARNET DEADWEIGHT TESTER 6000 SERIES Release: S31-0250 Revision: A Date: 05/08/03 MANUFACTURED BY: GE RUSKA RUSKA INSTRUMENT CORPORATION 10311
More informationExercise 2-3. Flow Rate and Velocity EXERCISE OBJECTIVE C C C
Exercise 2-3 EXERCISE OBJECTIVE C C C To describe the operation of a flow control valve; To establish the relationship between flow rate and velocity; To operate meter-in, meter-out, and bypass flow control
More informationModel AWG20 AWG30 AWG40 AWG20K AWG30K AWG40K
Modular Type ilter Regulator with uilt-in Pressure auge eries W ilter Regulator with uilt-in Pressure auge eries W ominal filtration rating ccessory W2 /8, /4 W3 /4, 3/8 W /4, 3/8, /2 racket Pages 424
More informationE 328 E 498 Tank top mounting Connection up to G1½ / -24 SAE and SAE 2 Nominal flow rate up to 600 l/min / gpm
Return-Suction Filters E 8 E 98 Tank top mounting Connection up to G½ / - SE and SE Nominal flow rate up to 6 l/min / 8. gpm Description pplication For operation in units with hydrostatic drives, when
More informationFull Range Pressure Compensating Variable Flow Control
Engineering & Manufacturing Solutions Specifications: See flow chart for capacity. Rated for 3000 psi (207 bar). Weighs 7- ¾ lbs. (3.52 kg). 30-Micron Filtration Recommended. Torque to turn side lever
More informationMonoblock directional control valves ML - Directional control valve
Monoblock directional control valves ML - Directional control valve ML Before use, carefully read the GENERAL INSRUCIONS FOR USE OF DIRECIONAL CONROL VALVES 398SMD4I - 6--8 ML echnical data Nominal flow
More informationW68 Series Control Valves
Indianapolis hicago San Juan www.hollandapt.com 800-800-8464 W Series ontrol Valves W68 Series ontrol Valves pplication W68 valves are used in flow and pressure control applications. These valves are pneumatically
More informationProportional Pressure-Relief Cartridge Valve, Size 2...4
Proportional Pressure-Relief Cartridge Valve, Size... Q max = l/min (6 gpm), p max = bar (58 psi) Direct acting, electrically operated Description proportional pressure-relief valves are direct acting
More informationIndustrial Regulator Series 1800/2000
E S 85. Industrial Regulator Series / M Quality System QMI is ccredited by: R E I T ISO 9 ertified R E NSI R G I S T R R utch ouncil for ccreditation Measurement Engineers Since 86 merican Meter Series
More informationHoisting Equipment Cable puller & Accessories
Yale hoists and trolleys are not ed for Cable puller model Yaletrac Pulling force 800-3200 It has a light weight, compact, high tensile aluminium alloy housing with a large flat bottom surface for increased
More informationPDY TON HYDRAULIC CRIMPING TOOL WARNING
OPERATORS ORS GUIDE PDY-1220 12 TON HYDRAULIC CRIMPING TOOL All information found in this guide must be read and understood before use or testing of this tool. Failure to read and understand these warnings
More informationInstallation, Operation & Maintenance Manual for Flo-Max Coupler Bracket Model FM150
Installation, Operation & Maintenance Manual for Flo-Max Coupler Bracket Model FM150 January 2013 Form FVC 084 - Rev 02 IMPORTANT: KEEP THIS DOCUMENT WITH THE PRODUCT UNTIL IT REACHES THE END USER. 1.
More informationThe Compact, Portable, Efficient and Economical Solution to boost Shop Compressed Air Pressure by 2 or 3 times
Tseries Series AB AB Air Air Boosters Boosters The Compact, Portable, Efficient and Economical Solution to boost Shop Compressed Air Pressure by 2 or 3 times.01/1 MANIFOLD MOUNTED VALVES FOR EASY SERVICING
More informationVEP-PSERIES INTERCHANGE > Stucchi VEP profile
VPPSRIS INRHAN > Stucchi VP profile HNIAL AURS AN OPIONS Interchange Stucchi VP profile Sealing description Nitrile NR onnection system Screw SUHI SOLUIONS Available sizes Material /treatment Available
More informationDECLARATION OF INCORPORATION
AESSEAL (MCK) Ltd. Systems Division 139a Hillsborough Old Road Lisburn Northern Ireland BT27 5QE Tel +44 (0) 2892 669966 Fax +44 (0) 2892 669977 When selecting and installing suitable Barrier Fluid System
More informationHEAVY DUTY PNEUMATIC
HEAVY DUTY PNEUMATIC Series A4 MEDIUM DUTY HYDRAULIC Series H4 PERMANENTLY LUBRICATED HEAVY DUTY PNEUMATIC Series L4 586.778.7680 SERIES A4/L4/H4 39 A4/L4/H4 FEATURES 1 1 9 9 12 8 7 5 12 3 13 4 10 2 11
More informationPilots Specifications
ilots Specifications - -way ressure Reducing metal pilot. 7-0 SI (0.-6 bar) - -way ressure Sustaining metal pilot. 7-0 SI (0.-6 bar) - -way Quick Relief metal pilot. 7-0 SI (0.-6 bar) - Altitude metal
More informationBinks SG-2 Plus TM Rotary 2 QT. PRESSURE CUP
Binks SG-2 Plus TM Rotary 2 QT. PRESSURE CUP Model No. 80-651 Rotary Agitator INTRODUCTION Binks SG-2 TM Plus Rotary 2 Qt. Pressure Cup is ideal for component spraying and industrial applications where
More informationBIMBAR INFLATABLE PACKERS AND ACCESSORIES
BIMBAR INFLATABLE PACKERS AND ACCESSORIES Geopro supplies a complete range of inflatable packers in nine different diameters from 28 up to 170mm. All our packers made of BIMBAR rubber technology are reinforced
More informationDK ton, Double-acting, Die-type Crimping Tool
INSTRUCTION MANUAL DK6040 60-ton, Double-acting, Die-type Crimping Tool Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register
More informationHIGH FLOW HIGH PRESSURE PUMP type BMS
When you have to test objects on different locations within your workshop, the mobile pump system BMS gives you the possibility to test adequately on different sites. Through its wheels (or forklift pockets)
More informationP r o d u c t R a n g e Data sheet: P
P r o d u c t R a n g e Data sheet: P245423-10 Pressure Reducing Maintains a constant downstream pressure regardless of upstream pressure or flow rate fluctuations. The set point of reduced pressure is
More informationSABRE AIRLINE BREATHING APPARATUS
SABRE AIRLINE BREATHING APPARATUS Modulair The Sabre Modulair is a compact, easy to use airline trolley system designed to provide portable clean air in restricted access areas. Versatile and robust, it
More informationMcFarland TriTan, LLC.
Series MAC 26 API 674 Compliant Single Acting Reciprocating Pump Air/Gas Driven Chemical Injection/Hydrostatic Testing Pump SPECIFICATIONS Power Cylinder Size 6" Stroke Length 2" Adjustable Speed up to
More informationWARNING: READ THE GENERAL INFORMATION MANUAL INCLUDED FOR OPERATING AND SAFETY PRECAUTIONS AND OTHER IMPORTANT INFORMATION.
GSR500 Ram Assembly General Description The GSR500 single post lift / ram uses a 3-1/4 air powered cylinder, which is welded to a heavy gauge base. It is normally used to raise and lower a fluid handling
More informationSCK01 AIR COMPRESSOR KIT WITH QUICK FITTINGS - SPRAY/BLOW/OIL GUN, TYRE INFLATOR & HOSE
SCK01 AIR COMPRESSOR KIT WITH QUICK FITTINGS - SPRAY/BLOW/OIL GUN, TYRE INFLATOR & HOSE OWNER S MANUAL FOR YOUR SAFETY PLEASE READ THESE INSTRUCTIONS CAREFULLY AND RETAIN THEM FOR FUTURE USE. SAFETY GUIDELINES
More informationACCU-PULSE Installation and Operation Instructions
ACCU-PULSE Installation and Operation Instructions Pump Discharge Installation: Chargeable Models Step 1: Mounting Position Mount ACCU-PULSE as close to the pump discharge as possible to absorb the pulse
More informationPORTABLE MEDICAL AIR SYSTEM
ALL-IN-ONE CONVENIENCE PORTABLE MEDICAL AIR SYSTEM 2007 Western Medica AIRTOTE Western s new AirTOTE portable medical air system brings a new level of simplicity and cost Portable Medical Air System with
More informationTech. Services: (800) Fax: (800) Order Entry: (800) Fax: (800) MODEL B HYDRAULIC HAND PUMP SINGLE STAGE
Parts List for: Form No. 101804 SPX Corporation 88 11th Street Rockford, IL 61109-3699 USA Internet Address: http://www.powerteam.com Tech. Services: (800) 477-8326 Fax: (800) 76-8326 Order Entry: (800)
More informationAIR/OVER HYDRAULIC JACK 20 TON
AIR/OVER HYDRAULIC JACK 0 TON 4487 ASSEMBLY AND OPERATING INSTRUCTIONS 349 Mission Oaks Blvd., Camarillo, CA 930 Visit our Web site at http://www.harborfreight.com Copyright 999 by Harbor Freight Tools.
More informationAuto-Rewind Hose Reels INSTRUCTION MANUAL FOR OXY-LPG MODEL
Auto-Rewind Hose Reels INSTRUCTION MANUAL FOR OXY-LPG MODEL Introduction Thank you for purchasing a Retracta Auto Rewind Hose Reel. The Retracta range of hose reels are a breakthrough in industrial quality
More informationAir Amplifiers & SYSTEMS
Air Amplifiers & SYSTEMS We Accept VISA, MasterCard and American Express Air Amplifiers Point-of-Use Air Solutions Maximator air amplifiers are designed to boost plant air pressure or increase the supply
More informationAIR CHUCKS, TIRE GAUGES AND INFLATOR GAUGES
Series AIR CHUCKS, TIRE GAUGES AND INFLATOR GAUGES Standard Air Chucks 374 Flow-Thru Air Chucks 375 Standard Pencil Tire Gauges 376 Dual Foot Tire Gauges 377 Dial Tire Gauges 378 Digital Tire Gauges 379
More informationRegO Adapters, Connector, & Fittings
RegO dapters, onnector, & Fittings Extended Type ouplings for Vapor and Liquid Service esigned especially for liquid filling and vapor equalization of LP-Gas and anhydrous ammonia. The limited travel of
More information