NEEDLE VALVES TYPE RA
|
|
- Regina Owen
- 5 years ago
- Views:
Transcription
1 R NL VLVS TYP R The products are included in pressure adjusting accessories class. They are designed according to main requests regarding the security assurance of the pressure equipment users, mentioned by H 584/2004. lassification of the needle valves : -valves type R with threaded holes and/or sockets for process connection -valves type Rwith flanges for process connection THNIL HRTRISTI Nominal pressure - soft seat version (NYLON) : 450 bar - hard seat version 700 bar - valves with flange : bar Max operating temperature - soft seat version (Nylon and NR garniture) - hard seat version (VITTON garniture) : : hard seat version (TLON garniture) : hard seat version (RILX garniture) : 550 Nominal diameter N : - 4; 6; 12 (R) -10; 15; 20; 25 (R) PHYSIL HRTRISTIS Materials - ody - Socket - Rod - Packing gland - over - Lever - langes : arbon Steel** or W Rolled steel or W ISI 316 arbon Steel** or W Polietilen\ arbon Steel** or W arbon Steel** or W ** = zinc plated NOTĂ: low out manufacturing available for all types configurations. S.. : R642 RV : 2008
2 R Valve Malexemale (450 bar; ) Valve Malexemale (700 bar; ) Valve Malexemale (700 bar; ) Valve Malexemale (700 bar; ) ,5 85,7 0,3 4L50 4L ,3 60 0,3 (n) 12 (n12) 6,3(n6), -thread acc. coding acc. coding ,5 98 0,3 85,7 0,3 4L50 4L32 4L ,3 60 0,3 60 0,3 (n) 12 (n12) 9 (n10) 6,3(n6), -thread acc. coding max. 3/4 acc. coding. Valve emalexemale (450 bar; ) Valve emalexemale (700 bar; ) Valve emalexemale (700 bar; ) Valve emalexemale (700 bar; ) ,5 73 0,3 4L50 4L ,3 60 0,3 (n) 12 (n12) 6,3(n6), -thread acc. coding acc. coding ,5 88 0,3 73 0,3 4L50 4L32 4L ,3 60 0,3 60 0,3 (n) 12 (n12) 9 (n10) 6,3(n6), -thread acc. coding max. 3/4 acc. coding. S.. : R642 RV : 2008
3 R Valve Malex3emale (450 bar; ) Valve Malex3emale (700 bar; ) (3 PORTI) (3 PORTI) H H Valve Malex3emale (700 bar; şi ) ,3 4L ,3 (n) 6,3 (n6) 60 H 36, -thread acc. coding (3 PORTI) H Valve Malexemale (700 bar; ) Valve emalexemale (700 bar; ) ,3 4L ,3 (n) 4 (n4), - max. 1/4 thread S.. : R642 RV : 2008
4 R Valve Malexemale angle body(450 bar, ) Valve Malexemale angle body(700 bar, ) Valve Malexemale angle body(700 bar, ) Valve Malexemale angle body(700 bar, ) ,3 54 0,3 52 0,3 38 0,3 4L50 4L ,3 60 0,3 (n) 12 (n12) 6,3(n6), -thread acc. coding acc. coding S.. : R642 RV : 2008
5 R b INHIS Hi SHIS Hd d Ød2 Ød1 N nxød3 R - VRINT TNSR U SUN IN NYLON R valve soft seat version (NYLON) b INHIS Hi SHIS Hd d Ød1Ød2 N nxød3 R - VRINT TNSR MTL-MTL R valve hard seat version PN (bar) N Hi Hd L d d1 d2 n x d3 b x x x x x x Recomandation: xecution at flanges according SR N :2002 or SR ISO :2000 S.. : R642 RV : 2008
6 R OIN (HOW TO ORR) R Model R oding level XX X X X X X a b c d e f oding level denomination a. onnection type 11 1/4 NPT N /2 NPT 13 3/4 NPT N NPT 21 1/4 r N /2 r 23 3/4 r N r 31 1/4 N /2" 33 3/4 N * max thread 3/4" (make up type and size) N10 * coding only with 3, 4 sau 5 at level b. 36 ** max thread 1/4" (make up type and size) N4 ** coding only with 3 at level b. 42 Pipe ends and cap nuts 43 Welding socket 00 Other at request*** *** specify explicit b. Max operating temperature: (nylon seat NR garniture - Pn = 450 bar ) (hard seat VITTON garniture - Pn = 700 bar ) (hard seat TLON garniture - Pn = 700 bar ) (hard seat RILX garniture - Pn = 700 bar ) c.valve body configuration 1 Line - body 2 ngle - body d. onnection type 0 Other ar request**** 1 Soket x sleeve : ML X ML 2 Sleeve X sleeve: ML X ML 3 Soket x sleeve : ML X 3ML **** specify explicit e. Material 1 arbon steel 2 SS type W f. Options 0 Without blow out screw 1 With blow out screw 2 With plug, blog out plig and blow ot screw (coding only with 3 at level d) S.. : R642 RV : 2008
7 R OIN (HOW TO ORR) R Model R xxx xxx x x x x oding level a b c d e f oding level denomination a. Nominal diameter at flange (N) mm mm mm mm b. Nominal pressure (PN) 6 6 bar bar bar bar bar bar bar bar bar bar bar c. ody; flanges materials 0 arbon steel 1 SS type W 4541 b. Max operating temperature: (nylon seat NR garniture - Pn = 450 bar ) (hard seat VITTON garniture - Pn = 700 bar ) (hard seat TLON garniture - Pn = 700 bar ) (hard seat RILX garniture - Pn = 700 bar ) e. Purge 1 Without purge 2 With purge S.. : R642 RV : 2008
8 R PPLITIONS OR VLV ( ) US OR MNUTURIN INSTLLTIONS S.. : R642 RV : 2008
9 S.. : R642 RV : 2008 R
FUTURGAS VALVES. Components Pz. Materials
UTURS VLVS 8 7 6 9 5 1 3 4 2 omponents Pz. Materials 1 ody 1 N 12165 W617N 2 nd connection 1 N 12165 W617N 3 all 1 N 12165 W617N 4 all seal 2 P.T... 5 Stem 1 N 12164 W614N 6 Rod seal O-Ring 2 NR 70 Sh
More informationSLEEVED PLUG VALVES 2-WAY
Specialty Valves 2-WAY ANSI/ASME CLASS 150 LBS Dimensions to ANSI B16.5 & B16.10 1 Six (6) top holes * 2 1/2 valves are made from 3 casting, but flanges are machined to 2 1/2 dimensions 1/2 4.25 108.00
More informationSLEEVED PLUG VALVES 2-WAY
Specialty Valves 2-WAY ANSI/ASME CLASS 150 LBS Dimensions to ANSI B16.5 & B16.10 1 Six (6) top holes * 2 1/2 valves are made from 3 casting, but flanges are machined to 2 1/2 dimensions 1/2 4.25 108.00
More informationType 4708 Supply Pressure Regulator
Type 708 Pressure Regulator Application pressure regulator used to provide pneumatic measuring and control equipment with a constant air supply Set point range 0.5 to bar (8 to 90 psi) The pressure regulator
More informationSelf-operated Regulators Accessories Differential Pressure and Flow Regulators
Self-operated Regulators Accessories Differential Pressure and Flow Regulators Compression-type fittings Needle valves Compensation chambers Orifice plates Welding neck flanges Control lines Application
More informationRegulating valves Type REG 6-65 Type REG-SS REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Regulating valves Type REG 6-65 Type REG-SS 15-40 REFRIGERATION AND AIR CONDITIONING Technical leaflet Content Page Introduction........................................................................................3
More informationSi C132. Safety valves for pressure relief in accordance to PED, DIN/EN and ASME. Engineering GREAT Solutions
Safety valves for pressure relief in accordance to PED, DIN/EN and ASME Engineering GREAT Solutions Si C132 Features The universal compact safety valve > 3 body seat sizes for appropriate size selection
More informationCA14 SG Iron Air and Gas Trap ½" and ¾" (Screwed)
ert. No. LRQ 9638 ISO 91 14 SG Iron ir and Gas Trap ½" and ¾" (Screwed) TI-P148-1 ST Issue 6 escription The 14 is a range of float type automatic liquid drainers for air and gas systems. The body and cover
More informationHigh-Purity. Ball Valves
High-Purity s Components MANUFACTURING ASSEMBLY TESTING HP High-Purity s CFOS Applications Cost-effective systems where cleaning for oxygen-grade services are required, such as: Clean-Dry Air (CDA), Oil-Free
More informationSV5 Safety Valve Installation and Maintenance Instructions
3120036/3 IM-S13-12 CH Issue 3 SV5 Safety Valve Installation and Maintenance Instructions 1. General specification 2. Supply 3. Before fitting the valve 4. Installation 5. Damage prevention 6. Commissioning
More informationAir Saving Valve reduction in 40% air consumption 40% air consumption Air consumption reduction ratio (%) Flow valve Flow valv
CAT.ES-173 A Air Saving Valve % reduction in air consumption Cuts air consumption by operating the return stroke at a reduced pressure. valve Pressure Air consumption reduction ratio (%) 3 1.1.1...3 pressure
More informationRegulating valves REG-SA and REG-SB
MAKING MODERN LIVING POSSIBLE Technical brochure Regulating valves REG-SA and REG-SB REG-SA and REG-SB are angleway and straightway hand regulating valves, which act as normal stop valves in closed position.
More informationBTV. Internally threaded 2-way control valve. Flow characteristics. Function
Internally threaded 2-way control valve The valves are designed for control of hot, cold or glycol-mixed water in heating and ventilation systems. They are pressure balanced (from DN20-50, not DN15) and
More informationVEP-PSERIES INTERCHANGE > Stucchi VEP profile
VPPSRIS INRHAN > Stucchi VP profile HNIAL AURS AN OPIONS Interchange Stucchi VP profile Sealing description Nitrile NR onnection system Screw SUHI SOLUIONS Available sizes Material /treatment Available
More informationArmatures for analytical probes
Armatures for analytical probes For many different types of installations and applications Large range of probe holders General purpose, water treatment, food & beverage, pharmaceutical applications Type
More informationPrecision and Instrument Regulators 1/4" port size
Section 8 Precision and Instrument Regulators /" port size Contents -8 Precision Air Pressure Regulator /" ports............ale-8-2 R38 Instrument Regulator Aluminum Model /" ports.........ale-8- -8 R38
More informationContinental Industries STEEL SERVICE TEES or FAX Visit
Continental Industries STEEL SERVICE TEES 1-800-558-1373 or FAX 1-800-788-1668 Visit www.conind.com ABOUT US Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and
More informationType 4708 Supply Pressure Regulator
Type 478 Pressure Regulator Application pressure regulator used to provide pneumatic measuring and control equipment with a constant air supply Set point ranges. to.6 bar ( to 4 psi) or. to 6 bar (8 to
More informationDirectional Control Valves Series VA13 and VA15 3- and 5-port valves, G1/8
Directional Control Valves Series VA13 and VA15 3- and 5-port valves, G1/8 Catalogue 9127003472GB-ul VA13 and VA15 Directional Control Valves Robust 3- and 5-port valves with brass bodies and stainless
More informationGauge Valves / Multi-Port Valves & Air Distribution Manifolds
auge Valves / Multi-Port Valves & ir istribution Manifolds OV Series Orifice valves 6,000 psi and 10,000 psi rated V Series Multi-port gauge valves 6,000 psi and 10,000 psi rated PV Series Rising plug
More informationISO Sub-bases. Port sizes G 1 /4 - G1 and 1 /4NPT - 1 /2NPT. Sub-bases tovdma specification, for ISO sizes #1, #2, #3 and #4
Port sizes 1 / - 1 and 1 /NPT - 1 /NPT Sub-bases tovd 3 specification, for ISO sizes #1, #, #3 and # Universal bases for ISO sizes #1 and #, side and bottom ported Technical Data edium: See individual
More informationType 4708 Supply Pressure Regulator
Type 478 Pressure Regulator Application pressure regulators used to provide pneumatic measuring and control equipment with a constant air supply Set point ranges. to. bar ( to 4 psi). to bar (8 to 9 psi)
More informationVEP-HDSERIES INTERCHANGE > Stucchi VEP profile
V-HSRIS INRHAN > Stucchi V profile HNIAL AURS AN OIONS SUHI SOLUIONS Interchange Stucchi V profile Sealing description Nitrile NR onnection system Screw HL version= lock system Available sizes Material
More informationInstallation, Operation and Maintenance Manual for Back Pressure Regulator
Installation, Operation and Maintenance Manual for Back Pressure Regulator Model 8860 2009 Groth Corporation IOM-8860 Rev. B 12541 Ref. ID: 95565 Page 2 of 13 Table of Contents I. INTRODUCTION 3 II. DESIGN
More informationTWO POST RAM PACKAGE 5 GALLON READ THIS MANUAL CAREFULLY BEFORE INSTALLING, OPERATING OR SERVICING THIS EQUIPMENT.
OPERATOR S MANUAL TP0411G2XXXXXXXX INCLUDING: OPERATION, INSTALLATION AND MAINTENANCE. RELEASED: 2-15-10 INCLUDE MANUALS: AF0411GXXXXXX-XX-X Two-Ball Pump (97999-1496), 66731-X Follower Assembly (pn REVISED:
More informationDual position solenoid valve Type ICSH 25-80
Data sheet Dual position solenoid valve Type ICSH 25-80 ICSH dual position solenoid valve belongs to the ICV family and consists of an ICV housing, an ICS insert together with an ICSH top cover with 2
More informationTechnical Information Cleanfit CUA451
TI00369C/07/EN/13.13 71238305 Products Solutions Services Technical Information Cleanfit CUA451 Manually operated retractable assembly for water, wastewater and process media Application Drinking water
More informationB2KL: 6-way ball valve with male thread, PN 16
Product data sheet 3.1 58.001 K: 6-way ball valve with male thread, PN 16 How energy efficiency is improved fficiency means precise control and low actuating forces eatures 6-way ball valve for changeover
More informationGAS DISTRIBUTION PRODUCTS TRANSITION FITTINGS
GAS DISTRIBUTION PRODUCTS TRANSITION FITTINGS CONTINENTAL INDUSTRIES, INC. The Ultimate Connection CONTINENTAL INDUSTRIES, INC. ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, Inc.,
More informationDifferential Pressure Regulator Type Type 45-6 (0.1 to 1 bar, DN 15) Mounting and Operating Instructions EB 3226 EN
Differential Pressure Regulator Type 45-6 Type 45-6 (0.1 to 1 bar, DN 15) Mounting and Operating Instructions EB 3226 EN Edition March 2008 Contents Contents Page 1 Design and principle of operation...................
More informationPressure Reducing Valve DMV 750 set range: bar
Pressure Reducing Valve DMV 750 set range:.0-6.0 bar Advantage pressure setting possible at any time, also during operation hermetically sealed by valve diaphragm high level of operating safety and long
More informationHand operated regulating valves Types REG-SA and REG-SB
Data sheet Hand operated regulating valves Types REG-SA and REG-SB REG-SA and REG-SB are angleway and straightway hand operated regulating valves, which act as normal shut-off valves in closed position.
More informationDifferential pressure and flow controller (PN 16) AVPQ - return mounting, adjustable setting
Data sheet Differential pressure and flow controller (PN 16) AVPQ - return mounting, adjustable setting Description AVPQ is a self-acting differential pressure and flow controller primarily for use in
More informationPart No (Low Changeover) Part No (High Changeover) Part No (High Changeover)
ELX-S TM UNIT 60% 665020 (Low Changeover) 305274 (High Changeover) 305305 (High Changeover) IMPORTANT: This catalog is published as an aid in identifying the detail parts that make up this complete device.
More informationPressure Equalising Valves Model , for Differential Pressure Gauges
Accessories Pressure Equalising Valves Model 910.25, for Differential Pressure Gauges WIKA Data Sheet AC 09.11 Applications T Isolating, pressure equalising as well as purging and air bleeding valves to
More informationPressure Reducing Valve DMV 755 set range: 1,0-9,0 bar
Pressure Reducing Valve DMV 755 set range:,0-9,0 bar Advantage pressure setting possible at any time, also during operation high reproducibility of the set pressure high level of operating safety and long
More informationHERZ-Motorised flow controler
HERZ-Motorised flow controler Control and regulating valve Data sheet 46, Issue 214 Dimensions in mm 4 close dimension 9,35 M DN G H1 H2 H2 + Actuator B1 B2 1 2 M 1 46 11 15 3/4 G 66 59 73 134 49 63 48
More informationWater. VAG DUOJET Automatic Air Valve Single-chamber type PN 10/16/25/40 - DN KAT-A 1912
Water VAG DUOJET Automatic Air Valve Single-chamber type Product characteristics and benefits Resilient seated With flange end acc. to EN 1092-2 Single chamber air valve in compact design Very high discharge
More informationAVP-F. p setting range (bar) Code No. 003H6200
Data sheet Differential pressure controller (PN 16) AVP - return and flow mounting, adjustable setting AVP-F - return mounting, fixed setting Description The controller has a control valve, an actuator
More informationALF400 to 900, ALT-5/-9
Auto Feed Lube, Auto Feed Tank 00 to 900, -/-9 Standard Specifications Auto feed lube 00 00-0 00 00 00 900 - --IS- -9 AIR : OIL : Fluid Proof pressure Air. MPa 0. MPa.0 MPa (Note ) Operating pressure differential
More informationBall Float Steam Trap UNA 43 PN 16/CL 125/JIS 10K UNA 46 PN 40/CL 150/CL 300/JIS 10K/JIS 20K DN 80, 100, 150, 3", 4", 6"
Data Sheet 819584-00 Issue Date: 01/17 Ball Float Steam Trap UNA 43 PN 16/C 125/JIS 10K UNA 46 PN 40/C 150/C 300/JIS 10K/JIS 20K DN 80, 100, 150, 3", 4", 6" UNA 43 hl, UNA 46 hl UNA 43 v, UNA 46 v with
More informationEnd Connection. Thread x Thread N/A N/A N/A N/A Flange x Flange N/A
Worldwide Contacts www.tyco-fire.com Model RV-1 Pressure Relief Valve, Pilot-Operated, Globe and Angle Body Styles General Description Valves, through inch (DN50 through DN00), are factory assembled and
More informationLIQUID LEVEL GAUGE FOR WELDING ZGAU 716 O&M, 717 O&M, 718 O&M, 719 O&M
LIQUID LEVEL GAUGE FOR WELDING ZGAU 7 O&M, 77 O&M, 78 O&M, 79 O&M Edition: 07/0 Date: 0.07.0 GO WITH OUR FLOW SPIS TREŚCI. Introduction. Construction. Installation. Installation of liquid level gauge of
More informationHIGH PRESSURE CONTROL VALVES
METERING VALVE APPLICATIONS: This valve can be used to meter or control flow of liquids and/ or gases on meter runs, flow lines, or may be used as a choke under low pressure drop conditions where freezing
More informationSpeciÞcations. Engine Dimensions Dimensions in millimeters. Inch equivalents shown in [].
SpeciÞcations Engine Dimensions Dimensions in millimeters. Inch equivalents shown in []. Ê ßÔ Ê ÛÝ Ñ Ê Û ÎÊ Û É 5 ENGINE IDENTIFICATION NUMBERS Kohler engine identiþcation numbers (model, speciþcation
More informationPipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
More informationVCO O-ring Face Se al Fit tings
www.swagelok.com O-ring Face Se al Fit tings /8 to sizes 36 or 36L stainless steel, NPT, S thread, and weld connections 2 O-ring Face Seal Fittings ontents Features........................................
More informationAir Saving Valve. Pressure Valve Flow Valve
Air Saving Valve Series Series Pressure Valve Flow Valve % reduction in air consumption Cuts air consumption by operating the return stroke at a reduced pressure. valve Pressure Air consumption reduction
More informationMUELLER. A Wall Type. Indicator Post. Reliable Connections. General Information 2. Technical Data/ Dimensions 3. Installation 4-5.
Installation Instructions manual MUELLER table of contents PAGE A-20814 Wall Type General Information 2 Technical Data/ Dimensions Installation 4-5 Maintenance 6 Parts 7 Indicator Post! WARNING: 1. Read
More informationVEP-HDSERIES INTERCHANGE > Stucchi VEP profile
V-HSRIS INRHAN > Stucchi V profile HNIAL AURS AN OIONS SUHI SOLUIONS Interchange Stucchi V profile Sealing description Nitrile NR onnection system Screw HL version= lock system Available sizes Material
More informationASYBCO 90 O ELBOW LONG RADIUS O.D. I.D.
90 O ELBOW LONG RADIUS Standard weight Extra strong Schedule 160 Double extra strong ASTM A-234 ASME / ANSI B16.9 Carbon and ferritic alloy steel Produced from X-rayed, stress-relieve welded pipe. Welds
More informationVG3000. Globe Valves Series for Terminal Units. Product Bulletin. 2-way PDTC (NO) with 6 bar close off pressure. Extend range of K VS
VG3000 Globe Valves Series for Terminal Units Product ulletin The VG3000 brass valve series is primarily designed to regulate the flow of water in response to the demand of a controller in zone and terminal
More informationContinental Industries TRANSITION FITTINGS or FAX Visit
Continental Industries TRANSITION FITTINGS 1-800-558-1373 or FAX 1-800-788-1668 Visit www.conind.com ABOUT US Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and
More informationVG3000. Globe Valves Series for Terminal Units. Product Bulletin. 2-way PDTC (NO) with 6 bar close off pressure. Extend range of K VS
VG3000 Globe Valves Series for Terminal Units Product ulletin The VG3000 brass valve series is primarily designed to regulate the flow of water in response to the demand of a controller in zone and terminal
More informationSR100 Series Service Regulators. Technical Bulletin
SR00 Series Service Regulators Technical Bulletin Model SR00 Series Regulator 0 Elster American Meter The compact, high capacity SR service regulator is designed for residential or light commercial/industrial
More informationPrecision Pressure Regulators
hapter - Pressure Regulators Pressure range onnection thread Device Page 3 mm, high precision 0.0 2 / 8 bar G 1 8 RI.02 highly sensitive, max. 3 bar supply pressure 0.002 0.12 / 31 bar ¼"NPT R40.03 without
More informationHigh Pressure Equipment Taper Seal Valves, Fittings and Tubing
igh quipment Taper Seal Valves, ittings and Tubing 0,000 and,000 psi service igh quipment Company has developed the Taper Seal line of products to assure safe and easy plumbing through,000 psi. These needle
More informationPressure Relief Valve DHV 718
Advantages frictionless components low maintenance low pressure increase up to fully opened valve constant low vibration controlling hermetically sealed by diaphragm for oscillating pumps for viscous media
More informationGas powered stop valves, type GPLX REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Gas powered stop valves, type GPLX 80-150 REFRIGERATION AND AIR CONDITIONING Technical leaflet Technical leaflet Gas powered stop valves, type GPLX 80-150 Contents Page Introduction........................................................................................3
More informationRTG 311 pressure regulators are included within the direct acting and balanced valve regulator class.
Introduction RTG 311 pressure regulators are included within the direct acting and balanced valve regulator class. The regulator is used for reducing and regulating the pressure of natural gases and LPG,
More informationHow to Order RM0 0 Z. IN/OUT fitting type Metric size Inch size Straight Elbow Straight Elbow Straight Elbow Straight Elbow ø ø ø ø ø ø ø ø ø/ ø/ ø/ ø
Series RM/ End lock RME Port Plug End block End block type Mounting position L Left side R Right side L side end block 0. L VVQ0000 Single unit regulator / Port plug for regulator block ø0 0 Options Note
More informationDifferential pressure controller (PN 16) AVPL - return mounting, adjustable setting
Data sheet Differential pressure controller (PN 16) AVPL - return mounting, adjustable setting Description It can be used on primary side of house substations for smaller systems such as one and two-family
More informationPressure Reducing Valve DMV 755
Pressure Reducing Valve DMV 755 Nominal size DN 10 50 Nominal size 3/8 2 Nominal pressure PN 10 bar Features pressure setting range 1 to 9 bar control valve for reliable reduction of system pressures to
More informationPressure balanced valves (PN 25) VM 2 2-way valve, external thread VB 2 2-way valve, flange
Data sheet Pressure balanced valves (PN 25) 2-way valve, external thread VB 2 2-way valve, flange Description VB 2 and VB 2 are two-way valves designed to work with Danfoss electric actuators AMV(E) 0,
More informationDifferential pressure controller (PN 16) AHP - return mounting, adjustable setting
Data sheet Differential pressure controller (PN 16) AHP - return mounting, adjustable setting Description DN 15-40 DN 50 DN 65-100 AHP is a self-acting differential pressure controller primarily for use
More informationAir Saving Valve. Series ASQ. Series ASR. Pressure Valve. Flow valve TMH ASD AS AS-FG AS-FP AS-FM ASP ASN AQ ASV AK VCHC ASS. r r AS-FE KE 10 0.
Air Saving Valve Series R Pressure Valve Series Q Flow Valve P r.9.7 2..3.1 D -FE KE -FG -FP -FM.1.2.2.3 pressure (MPa) -D -T P ow valve Fl N AQ V e n by o i t p nsum n stroke o c r i r a Cuts g the retu
More informationMounting and Operating Instructions EB 3007 EN. Self-operated Pressure Regulators. Differential Pressure Regulators (opening) Type Type 42-25
Self-operated Pressure Regulators Differential Pressure Regulators (opening) Type 42-20 Type 42-25 Type 42-20 Differential Pressure Regulator Type 42-25 Differential Pressure Regulator Mounting and Operating
More informationNeotecha SAPRO - Aseptic sampling valve SV Installation, operation and maintenance instructions
Before installation these instructions must be fully read and understood 2 Safety Please read these instructions carefully. 2.1 General danger potential Not paying attention to this instruction Incautious
More informationBall Float Steam Trap UNA 45 MAX, UNA 46 MAX, UNA 46A MAX PN 40/Class 300 DN 40, 50, 65
Data Sheet 819346-02 Issue Date: 05/17 Ball Float Steam Trap UNA 45 MAX, UNA 46 MAX, UNA 46A MAX PN 40/Class 300, 50, 65 UNA 45hl MAX, UNA 46hl MAX, UNA 46Ahl MAX UNA 45v MAX with cover for mounting electrode
More information40K TLX Nozzles 40K TLX
40K TLX Nozzles 40K TLX Application/Features: These nozzles are designed specifically for use with Flex or Rigid Lances having male Autoclave-type High Pressure threads. The TLX Nozzle features a special
More informationTHE MF-400 SERIES. Operating and Service Manual. Series includes all variants of MF-400/401
THE MF-400 SERIES Operating and Service Manual Series includes all variants of MF-400/401 Issue A October 2013 1 TABLE OF CONTENTS 1. Description... 3 2. Installation... 3 3. Operation... 4 4. Special
More informationSpare parts list ( ) Spare parts list HD 1090 WS *
Spare parts list (5.955-706.0) Spare parts list HD 1090 WS * 26.01.2015 www.kaercher.com EN Table of contents Spare parts list HD 1090 WS * (5.955-706.0)... 6 10 Individual parts... 7 11 Individual parts...
More informationNeotecha SAPRO - Tank Valve Type ST for aseptic sampling with bottles Installation, Operation and Maintenance Instruction
7 Before installation these instructions must be fully read and understood 1.4 Illegal technical changes It is illegal to do mechanical changes of the design of the Sapro tank valve, or to use parts of
More informationHand-operated regulating valves in stainless steel Types REG-SA SS and REG-SB SS
Data sheet Hand-operated regulating valves in stainless steel Types REG-SA SS and REG-SB SS In certain specific areas such as outdoor applications and corrosive atmospheres, such as coastal installations,
More informationDescription Supply pressure Pressure range Connection Device Page max. bar bar thread
Pressure Regulators Supply pressure Pressure range onnection Device Page max. bar bar thread Maxi -Series, robust, interlockable 1 0. 1.8 / 17 G¼ - G1 R0, R1.0 made of plastic, also for liquids 1,5 0 4
More informationfor for Industrial Refrigeration
Catalogue Shut-off Safety relief and regulating valves valves for for Industrial Refrigeration Contents Page Safety relief valves, type SFA 15 and SFA 15-50....3 Safety relief valves, type SFV 20-25....
More informationMaterials : Forged carbon steel A350 LF2
Size : Ends : Min Temperature : Max Temperature : DN 15 to 50 (NPS 1/2" to 2") Female - Female NPT, Socket Welding - 46 C + 425 C Max Pressure : 250 Bars (Class 1500) Specifications : Rising rotating stem
More informationSchroeder Check Test Point System
Perforated polyamide / kevlar hose, 2 mm ID, 5 mm OD, plastic dust cap. L in (mm) P (max) psi (bar) 6 (150) 10,000 (680) 12 (300) 10,000 (680) 24 (610) 10,000 (680) 36 (915) 10,000 (680) 48 (1220) 10,000
More informationVolume Booster. Volume Booster Description Supply pressure Pressure range Connection Device Page max. bar bar thread
Volume ooster Supply pressure Pressure range onnection Device Page max. bar bar thread precise differential pressure also 17 0 1 / 10 and G 3 8 R50.02 differential pressure also 10 0.2 1 / 8 ¼ NPT 53.19
More informationTWO POST RAM PACKAGE 55 GALLON
OPERATOR S MANUAL TP1265S5XXXXXXXX INCLUDING: OPERATION, INSTALLATION AND MAINTENANCE. INCLUDE MANUALS: AF1265SXXXXXX Extrusion Pump (97999-1528), RM552X-XXX-XX Two Post Lift / Ram (pn 97999-1445), & S-636
More informationBUTTERFLY VALVES. Toll Free (877) - ICFLUID -2-
BUTTERFLY VALVES 1. General HyrdoWer is a globally recognized manufacturer of power unit accessories. They have become specialists in the design of Butterfly Valves and Hydraulic Compensators. The shut
More informationDifferential pressure control and flow limiter AVPB/AVPB-F, PN 16
Data sheet Differential pressure control and flow limiter AVPB/AVPB-F, PN 16 Application AVPB is a self-acting differential pressure control and flow limiter primarily for use in district heating systems.
More informationMLS Series Liquid Level Switches. Installation and Operations Manual Section 15
MLS Series Liquid Level Switches Installation and Operations Manual 00-02-0730 2012-11-11 Section 15 In order to consistently bring you the highest quality full featured products, we reserve the right
More informationMUELLER. A A Adjustable. Vertical Indicator Posts. Reliable Connections. General Information 2. Technical Data 3.
Installation Instructions manual MUELLER table of contents PAGE A-20806 A-20807 Adjustable General Information 2 Technical Data 3 Dimensions 4 Installation 5-6 Parts 7 Maintenance 8 Vertical Indicator
More informationDifferential pressure
Differential pressure 9 Overview Page 200 VEGADIF 65 Page 202 Chemical seal Page 204 Accessory Page 208 199 VEGADIF For differential pressure, level and flow measurements Measuring principle The sensor
More informationSolenoid valves, two-step on/off Type PMLX REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Solenoid valves, two-step on/off PMLX REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction........................................................................................3
More informationEPOXY FITTINGS DIMENSIONS
Bulletin No. A150 May 1, 2004 EPOXY FITTINGS DIMENSIONS 2"-16" GREEN THREAD fittings may be used with GREEN THREAD and RED THREAD II piping. Refer to Chemical Resistance Guide, Bulletin No. E5615, for
More informationSYSTEM REGULATING VALVES PRESSURE RELIEF VALVE - SRV BRASS & S/STEEL ADJUSTABLE
SYSTEM REGULATING VALVES PRESSURE RELIEF VALVE - SRV BRASS & S/STEEL ADJUSTABLE This piston style pressure relief valve with conical shaped needle seat for accurate adjustment is available up to 3 in size.
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The EMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. Features Suitable for
More informationMUELLER A A Non-Adjustable. Vertical Indicator Posts. Reliable Connections. General Information 2. Technical Data 3.
Installation Instructions manual MUELLER table of contents PAGE A-20808 General Information 2 Technical Data 3 Dimensions 4 A-20809 Non-Adjustable Installation 5-6 Parts 7 Maintenance 8 Vertical Indicator
More informationPressure balanced valves (PN 25)
Data sheet Pressure balanced valves (PN 25) 2-way valve, external thread VB 2 2-way valve, flange Description VB 2 and VB 2 are two-way valves designed to work with Danfoss electric actuators AMV(E) 10,
More informationSATURNSERIES INTERCHANGE > ISO (for the couplings)
NTERHANE > (for the couplings) TEHNAL FEATURES AND OPTONS nterchange (for the couplings) Sealing description Nitrile NR onnection system Push Available sizes Material /treatment Available threads from
More informationPressure relief valve DHV 716 set range: 0,5-10,0 bar
Pressure relief valve DHV 7 set range: 0,5-0,0 bar Advantage pressure setting possible at any time, also during operation optimum monitoring valves high reproducibility of the set pressure high level of
More informationJRGURED Pressure reducing valves
JRG JRGURED Pressure reducing valves JRGURED 12 11 6 5 7 3 1 4 2 8 10 9 The JRGURED pressure reducing valves is a compact fitting for water systems consisting of a strainer and a pressure reducing valve.
More informationTwo-port valves, male threaded, PN25
4 379 Two-port valves, male threaded, PN25 VVG55... Two-port valves, externally threaded, PN25 Bronze Rg5 DN15... 25 mm (½"... 1") k vs 0.25... 6.3 m 3 /h Stroke 5.5 mm Suitable for type SQS35... or SQS65...
More informationSafety relief valves, type SFA 15
Safety relief valves, type SFA 15 Introduction SFA 15 are standard, back pressure dependent safety relief valves in angle-way execution, specially designed for protection of vessels and other components
More informationBASIN AND WALL MIXER INSTALLATION INSTRUCTIONS
BASIN AND WALL MIXER INSTALLATION INSTRUCTIONS IMPORTANT INFORMATION IMPORTANT All tapware and showers to be installed by a licensed plumber and to Australian Standards. Fit tempering and pressure reduction
More informationIN-LINE CHECK VALVES CIT-02 / 03 / 06 / 10 (1/4,3/8,3/4,1-1/4) RIGHT ANGLE CHECK VALVES CRT / CRG-03 / 06 / 10 (3/8,3/4,1-1/4)
IN-LIN HK VLVS IT- / 3 / / (/,3/8,3/,-/) RIGHT NGL HK VLVS RT / RG-3 / / (3/8,3/,-/) Up to 5 MPa (33 PSI), 3 L/min (33 U.S.GPM) Pub. - IRTIONL ONTROLS These valves allow free flow in one direction and
More informationDICTATOR "DIREKT" Gate Closer
DICTATOR "DIREKT" Gate Closer For Access Gates in Boundary Fences The DICTATOR gate closer DIREKT is the economic solution for the reliable and controlled closing of outside gates, such as admission gates
More informationMEDICAL CYLINDER VALVES
MEDICAL CYLINDER VALVES 3 1 Medical integrated valve for oxygen air and medical mixture 1.1 ALIONE 1.2 ALPINOX-valve 1.3 ALPINOX-valve compact 2 Cylinder valve with RPV for oxygen and medical gases -
More information