Effective Date: February Rev. 7/13/2018- Void After: February Product: Plumbing Fixtures (Stainless Steel) File No.
|
|
- Dwain Wright
- 5 years ago
- Views:
Transcription
1 IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the requirements of applicable codes and standards. This activity is coupled with periodic surveillance of the supplier's factory and warehouses as well as the assessment of the supplier's Quality Assurance System. This listing is subject to the conditions set forth in the characteristics below and is not to be construed as any recommendation, assurance or guarantee by IAPMO Research and Testing, Inc. of the product acceptance by Authorities Having Jurisdiction. The most updated information on this Certificate of Listing is available online at pld.iapmo.org Effective Date: February Rev. 7/13/2018- Void After: February Kuser Rd Trenton, NJ Identification: Each stainless steel plumbing fixture shall be permanently and legibly marked with the manufacturer's name or registered trademark or, in the case of private labeling, the name of the customer for whom the fixture was manufactured. Packaging shall be marked with the manufacturer's name or registered trademark or, in the case of private labeling, the name of the customer for whom the fixture was manufactured; and the model number. Product shall also bear the cupc certification mark. Markings should be applied so as to be visible after installation. Characteristics: Stainless steel plumbing fixture may include kitchen sinks, bar sinks, or lavatories. To be installed in accordance with the manufacturer's installation instructions and the requirements of the latest edition of the Uniform Plumbing Code. Products listed on this certificate have been tested by an IAPMO R&T recognized laboratory. This recognition has been granted based upon the laboratory's compliance to the applicable requirements of ISO/IEC This listing period is based upon the last date of the month indicated on the Effective Date and Void After Date shown above. Any change in material, manufacturing process, marking or design without having first obtained the approval of the Product Certification Committee, or any evidence of non-compliance with applicable codes and standards or of inferior workmanship, may be deemed sufficient cause for revocation of this listing. Production of or reference to this form for advertising purposes may be made only by specific written permission of IAPMO Research and Testing, Inc. Any alteration of this certificate could be grounds for revocation of the listing. This document shall be reproduced in its entirety.
2 Products are in compliance with the following code(s): Uniform Plumbing Code (UPC ) National Plumbing Code of Canada Products are in compliance with the following standard(s): ASME A /CSA B (R2013) including Update No. 2 dated March 2011
3 MODELS: STAINLESS STEEL INSET KITCHEN SINKS ENEX (Trade Name) Model No. Size Description ** " x 22" x 6"D Glowtone Topmount Single Bowl ** " x 19" x 6"D NewHome Manufactured Housing Sink ** " x 19" x 7"D NewHome Manufactured Housing Sink ** " x 22" x 6"D Glowtone topmount Double Bowl " x 15" x 6"D Glowtone Topmount Bar Sink " x 22" x 7"D Glowtone Topmount Single Bowl /8" x 21" x 7"D Single Bowl, 3 Hole " x 22" x 7"D Glowtone Topmount Single Bowl " x 22" x 8"D Glowtone Topmount Single Bowl " x 22" x 9"D Glowtone Topmount Single Bowl " x 20-1/2" x 7"D Double Bowl, 3 Hole BS 31-1/2" x 20*5/8" x 8"D Canadian series 50/50 double bowl, 1 hole " x 22" x 7"D Glowtone Topmount Double Bowl " x 22" x 8"D Glowtone Topmount Double Bowl " x 22" x 9"D Glowtone Topmount Double Bowl A "x22"x5 /5-1/2 /6 /6-1/2 D ADA Topmount single bowl A1722-7BS 17" x 22" 6-1/2" D Glowtone ADA compliant single bowl, 3 or 4 holes A "x19.5"x5 /5-1/2 /6 /6-1/2 D ADA Topmount single bowl A "x17"x5 /5-1/2 /6 /6-1/2 D ADA Topmount single bowl A "x19"5 /5-1/2 /6 /6-1/2 D ADA Topmount single bowl A "x22"5 /5-1/2 /6 /6-1/2 D ADA Topmount single bowl A "x22"5 /5-1/2 /6 /6-1/2 D ADA Topmount single bowl A BS 25" x 25" x 6-1/2"D Glowtone ADA compliant single bowl 3 or 4 holes A "x22"5 /5-1/2 /6 /6-1/2 D ADA Topmount double bowl A BS 33" x 22" x 6-1/2"D Glowtone ADA compliant double bowl 3 or 4 holes ACD "x18"x5 /5-1/2 /6 D ADA Zero radius Undermount 50/50 Double Bowl ACG "x18"x5 /5-1/2 /6 D ADA Zero radius Undermount Gourmet single Bowl ACR "x18"x5 /5-1/2 /6 D ADA Zero radius Undermount Bar/Prep Bowl ACS "x18"x5 /5-1/2 /6 D ADA Zero radius Undermount Single Bowl AHD "x18"x5 /5-1/2 /6 D ADA 10mm radius Undermount 50/50 Double Bowl AHG "x18"x5 /5-1/2 /6 D ADA 10mm radius Undermount Gourmet single Bowl AHR "x18"x5 /5-1/2 /6 D ADA 10mm radius Undermount Bar/Prep Bowl AHS "x18"x5 /5-1/2 /6 D ADA 10mm radius Undermount Single Bowl AU "x17.75"x5 /5-1/2 /6 D ADA Undermount single bowl AU "x18"x5 /5-1/2 /6 D ADA Undermount single bowl AU "X17.75"x5 /5-1/2 /6 D ADA Undermount double bowl BCD "X22" Bellus Topmount 60/40 Double bowl BCS "x22" Bellus Topmount single bowl BLS "X22" Bellus Topmount Large single bowl CF : Dia x 7"D The Club Undermount Round Bar Sink CH " x 13.58" x 6"D The Club Undermount Lavatory Bowl CNB "x14" Savoir Prep bowl Page 3 of 9
4 CND "x18" Savoir 60/40 double bowl CNG "x18" Savoir large single bowl CNR "x18" Savoir bar/prep bowl CNS "x18" Savoir single bowl CR " Dia x 6-1/4"D The Club Undermount Lavatory Bowl CS " x 17.95" x 5-1/2"D The Club Undermount Bar Sink CS " x 12.44" x 6-1/4"D The Club Undermount Bar Sink CS " x 17.17" x 7"D The Club Undermount Bar Sink CS " x 15-1/4" x 7" Club/bar/prep sink CST " x 14" 6.5"D Club corner bar/prep sink CTB " x 8-1/2" x 6"D Trough bar/prep sink, 21" CTB " x 8-1/2" x 6"D Trough bar/prep sink, 30" CTB-4285* 40" x 8-1/2" x 6"D Trough bar/prep sink, 40" CTC " x 8-1/2" x 6"D Curved trough bar/prep sink, 33" CTC-4512* 45" x 8-1/2" x 6"D Curved trough bar/prep sink, 45" CTD " x 18" x 10" D Contempo zero radius double 50/50 CTD " x 18" x 6.5" D Contempo zero radius double 50/50 CTG " x 18" x 10" D Contempo zero radius gourmet single CTG " x 18" x 6.5" D Contempo zero radius gourmet single CTO SR/SL 33" x 18" x 6.5" D Contempo zero radius double 70/31 CTO-3370SR/SL 33" x 18" x 10" D Contempo zero radius double 70/30 CTP-4300* 43" x 18" x 10" D Contempo zero radius triple CTR " x 18" x 10" D Contempo zero radius prep sink CTR " x 18" x 6.5" D Contempo zero radius prep sink CTS " x 18" x 10" D Contempo zero radius single CTS " x 18" x 6.5" D Contempo zero radius single CV /4" ID x 5-1/2" D ID Club lavatory vessel sink CVT /8" ID x 5-1/4" D Club lavatory self-rimming vessel sink EC " x 20"/17.95" x 8"D Elite Undermount Off-set Double Bowl ED " x 17.95" x 8"D Elite Undermount Double Bowl EHD "x17.95"x8"/5-1/2"D Elite Undermount High Low Double Bowl END-3360SR 33"x20" Epicure apron front farmhouse 60/40 double ENG "x20" Epicure apron front farmhouse Large single ENS "x20" Epicure apron front farmhouse single EPD-3650* 35-7/8" x 20" x 10" D Epicure farmhouse double 50/50 EPG /8" x 20" x 10" D Epicure farmhouse gourmet single EPO-3370SR/SL* 32-7/8" x 20" x 10" D Epicure farmhouse double 70/30 EPS-3000* 29-7/8" x 20" x 10" D Epicure farmhouse single ES " x 17.95" x 8"D Elite Undermount Single Bowl HDR/HDL /2" x 20-3/4" x 10D Homestead double bowl Offset corner Right or Left HSR/HSL /4" x 18-3/4" x 10D Homestead single bowl Offset corner Right or Left ISL " x 22" x 8"D Legend Topmount Off-set Double Bowl Sink LCR " x 31.89" x 8"D Legend Topmount Corner Sink LHD " x 22" x 8"/5-1/2"D Legend Topmount High Low Double Sink MB /16" x 18-7/16" x 9"D Medallion designer gourmet single bowl MC " X 20.71/*17/17.17" X 9"/8" Deep Medallion Undermount Offset Double Bowl MCS-3521SR/SL 35-1/4" x 20-7/8" x 9"& 7"D Medallion designer double bowl 70/30 Page 4 of 9
5 Small bowl Right or Left MD X 17.95" X 9" Deep Medallion Pro Undermount Double Bowl MEC " X 21"/17.95" X 9"/8" Deep Medallion Pro Undermount Large Single Bowl MES-3221SR-SL 31-7/8" x 20-5/8" x 10"& 7"D Medallion gourmet double bowl 70/30 Small bowl Right or Left MG-3209* 32"x21"/17.95"x9"/5-1/2"D Medallion Undermount Disposer Double Bowl MGD " x 20.2" x 9"D Medallion Undermount Large Double Bowl MGS " x 17.95" x 9"D Medallion Undermount Large Single Bowl MGT "x20"/17.95"x9"/5-1/12"/8"D Medallion Pro Undermount Triple Bowl MH /4" x 21" x 9"D Medallion designer offset single bowl MS " x 17.95" x 8"D Medallion Pro Undermount Single Bowl MS " X 17.95" X 9 "Deep Medallion Pro Undermount Large Single Bowl MS " X 21" X 9" Deep Medallion Undermount Single Bowl NOD " x 18" x 9" deep, 18 gauge Nouvelle 50/50 double bowl NOG " x 18" x 9" deep, 18 gauge Nouvelle large single bowl NOS " x 18" x 9" deep, 18 gauge Nouvelle single bowl NVS "x17.81" Novus Undermount Large single bowl PGD " x 22" x 9"D Legend Topmount Large Double Bowl PGS " x 22" x 9"D Legend Topmount Large Single Bowl PGT "x22"x9"/5-1/2"/8"D Legend Topmount Triple Bowl PMC/RMC-3322SR/SL* 33" x 22" x 9"/8"D Signature Topmount Offset Double Bowl PMG/RMG-3322SR/SL* 33" x 22" x 9"/5-1/2"D Signature Topmount Disposer Double Bowl PMS/RMS " x 22" x 9"D Signature Topmount Single Bowl PNC-3200 SR/SL 32.20"x21"/17.05"x9"/7"D Eston Undermount 70/30 Double Bowl, 16ga PND " x 17.72" x 9"D Eston Undermount 50/50 Double Bowl, 16ga PNE-3300 SR/SL 31.26" x 20"/17.95" x 9"/8"D Eston Undermount 60/40 Double Bowl, 16ga PNG " x 17.95" x 9"D Eston Pro Undermount Large Single Bowl, 16ga PNG " x 21" x 9"D Eston Undermount Single Bowl, 16ga PNL " x 17.95" x 9"D Eston Undermount Large Single Bowl, 16ga SBT " x 15" x 6-1/2"D Hospitality bar sink SCR " x 15" x 6-1/2"D Hospitality corner bar sink SDM /4" x 18-7/8" x 7"-1/2"D Hospitality drainboard bar/prep sink SDR /4"OD x 16" ID x 7-1/2"D Hospitality drainboard round bar/prep sink SMR " x 18.7" x 7"D Signature Topmount Round Twin Bowl SRF OD x 16" ID x 7-1/2"D Hospitality round bar, prep sink with ledge STC "x21"/17.05"x9"/7"D Eston Undermount 70/30 Double Bowl STD " x 17.72" x 9"D Eston Undermount 50/50 Double Bowl STE " x 20"/17.95" x 9"/8"D Eston Undermount 60/40 Double Bowl STL " x 17.95" x 9"D Eston Undermount Large Single Bowl, 18ga STS " x 17.95" x 9"D Medallion Pro Undermount Large Single Bowl STS " x 21" x 9"D Medallion Undermount Single Bowl Note: Model No. Variation per finish or configuration Prefix P: Satin Finish, R: Mirror Finish Note: All product materials are commonly T-304 stainless stell, 18 chrome, 8-10 nickel contents unless otherwise indicated.model preceded by "*" may be manufactured with type 304 or type 301 Stainless steel (16-6 Cr-Ni). Page 5 of 9
6 Note: Please refer to drawings previously submitted Note: Available finishes: MF = Mirror Finish BS = Satin Finish NOTE: Model numbers listed with an "*" are also available with the following: SR: Small Bowl Right SL: Small Bowl Left Note: Products may have 1,2,3, or 4 tap holes HAMATUSA Model No Size Description AADA-1718BU-** 17" x 18" x 5"/5 1/2"/6"D PRISM ADA 10mm Radius Undermount Bar/Prep Bowl AADA-2318SU-** 23" x 18" x 5"/5 1/2"/6"D PRISM ADA 10mm Radius Undermount Single Bowl AADA-3218DU-** 32" x 18" x 5"/5 1/2"/6"D PRISM ADA 10mm Radius Undermount Double Bowl AADA-3218SU-** 32" x 18" x 5"/5 1/2"/6"D PRISM ADA 10mm Radius Undermount Single Bowl ASP-1018B 9.33" x 17.95" x 5 1/2"D Aspect Series Undermount Compact Bar Sink ASP-1212B 14" x 14" x 6.5"D Aspect Series Undermount Corner Bar/Prep Sink ASP-1315B 14.69" x 12.44" x 6 1/4"D Aspect Series Undermount Small Bar Sink ASP-1418B 13.62" x 17.17" x 7"D Aspect Series Undermount Medium Bowl Bar Sink ASP-1519B 19" x 15 1/4" x 7"D Aspect Series Undermount Large Bowl Bar Sink ASP-1718B 16.26" x 17.95" x 8"D Aspect Series Undermount Square Bowl Bar Sink ASP-18RB 17.52: Dia x 7"D Aspect Series Undermount Round Bar Sink AXI-1214B 12" x 14" Axiom Series 10mm Radius Undermount Prep Bowl AXI-1718B 17" x 18" Axiom Series 10mm Radius Undermount Bar Bowl AXI-2318S 23" x 18" Axiom Series 10mm Radius Undermount Large Single Bowl AXI-3218D 32" x 18" Axiom Series 10mm Radius Undermount Double Bowl AXI-3218S 32" x 18" Axiom Series 10mm Radius Undermount Large Single Bowl CADA-2318SU-** 23" x 17.75" x 5"/5 1/2"/6"D Classic ADA Undermount Stainless Steel Sink CADA-3218DU-** 31.25" x 17.75"x 5"/5 1/2"/6"D Classic ADA Undermount Stainless Steel Sink CADA-3218SU-** 31.5" x 18" x 5"/5 1/2"/6"D Classic ADA Undermount Stainless Steel Sink CLA-2318S 23.19" x 17.95" x 9"D Classic Series Undermount Single Bowl CLA-3218D 31.5" x 17.95" x 9"D Classic Series Undermount 50/50 Double Bowl CLA-3221DR/L 31.5" x 21"/17.95" x 9"/8"D Classic Series Undermount 60/40 Double Bowl CON-2522ST 25" x 22" Contrive Series Zero Radius Topmount Single Bowl CON-3322DT 33" x 22" Contrive Series Zero Radius Topmount Large Single CON-3322ST 33" x 22" Contrive Series Zero Radius Topmount 50/50 Double Bowl DES-2421S 23.66" x 21" x 9"D Designer Series Undermount Single D Bowl DES-3221DR/L 32" x 21"/17.95" x 9"/ 5 1/2"D Designer Series Undermount 70/30 Double Bowl DES-3221S 29 1/4" x 21" x 9"D Designer Series Undermount Offset Single Bowl DES-3319S 32 7/16" x 18 7/16" x 9"D Designer Series Undermount Large Single Bowl DES-3322DL 32.52" x 20.71"/17.17" x 9"/8"D Designer Series Undermount 70/30 Double Bowl EDI-3322ST 33" x 22" x 9"D Edition Series Topmount Large Single Bowl EDI-4222TT 41.31" x 22" x 9"/ 5 1/2"/8"D Edition Series Topmount Triple Bowl ENT-2318S 23.19" x 17.95" x 9"D Enterprise Series Undermount Single Bowl ENT-2318S " x 17.95" x 9"D Eston Pro Undermount Large Single Bowl, 16ga ENT-2422D 23.66" x 21" x 9" D Enterprise Series Undermount Single D Bowl Page 6 of 9
7 ENT-2422D " x 21" x 9" Eston Undermount Single Bowl, 16ga ENT-3218D 31.26" x 17.72" x 9"D Enterprise Series Undermount 50/50 Double Bowl ENT-3218D " x 17.72" x 9"D Eston Undermount 50/50 Double Bowl, 16ga ENT-3218S 31.46" x 17.95" x 9"D Enterprise Series Undermount Large Single Bowl ENT-3218S " x 17.95" x 9" Eston Undermount Large Single Bowl, 16ga ENT-3220D-16 R/L " x 20"/17.95" x 9"/8"D Eston Undermount 60/40 Double Bowl, 16ga ENT-3220DR/L 31.26" x 20"/17.95" x 9"/8"D Enterprise Series Undermount 60/40 Double Bowl ENT-3321DDR/L 32.20" x 21"/17.05" x 9"/7"D Enterprise Series Undermount 70/30 Double Bowl ENT-3321DDR/L " x 21"/17.05" x 9"/7"D Eston Undermount 70/30 Double Bowl, 16ga GOR-3218S 31.46" x 17.95" x 9"D Gourmet Series Undermount Large Single Bowl GOR-3221D 31 7/8" x 20 5/8" x 10" & 7"D Gourmet Series Undermount 60/40 Double Bowl GOR-3221D 31.5" x 20.2" x 9"D Gourmet Series Undermount 50/50 Double Bowl GOR-4021T 39.80" x 20"/17.95" x 9"/ 5 1/2"/8"D Gourmet Series Undermount Triple Bowl HAL-17RLU 16.73" Dia x 6 1/4"D Halo Series Conical Undermount Lavatory Sink HAL-1814LU 17.72" x 13.58" x 6"D Halo Series Undermount Oval Bowl Lavatory Sink HOS-1515ST 15" x 15" x 6"D Hotel Series Topmount Bar Sink HOS-1722ST 17" x 22" x 7"D Hotel Series Topmount Single Bowl HUD-2920S 29 7/8" x 20" x 10"D Hudson Series Apron Front Single Bowl HUD-3020S 30" x 20" Hudson Series Apron Front Single Bowl HUD-3220DR/L 32 7/8" x 20" x 10"D Hudson Series Apron Front 60/40 Double Bowl HUD-3220S 32 7/8" x 20" x 10"D Hudson Series Apron Front Gourmet Single Bowl HUD-3320D 33" x 20" Hudson Series Apron Front 60/40 Double Bowl HUD-3320S 33" x 20" Hudson Series Apron Front Gourmet Single Bowl HUD-3620D 35 7/8" x 20" x 10"D Hudson Series Apron Front 50/50 Double Bowl HYD-2318S 31.10" x 18" x 9"D HYDRUS Series 15MM Radius Undermount 50/50 Double Bowl HYD-3218D 31.10" x 18" x 9" D HYDRUS Series 15MM Radius Undermount Large Single Bowl HYD-3218S 23" x 18" x 9" D HYDRUS Series 15MM Radius Undermount Single Bowl PADA-1718BU-** 17" x 18" x 5"/5 1/2"/6"D PRISM ADA Zero Radius Undermount Bar/Prep Bowl PADA-2318SU-** 23" x 18" x 5"/5 1/2"/6"D PRISM ADA Zero Radius Undermount Single Bowl PADA-3218SU-** 32" x 18" x 5"/5 1/2"/6"D PRISM ADA Zero Radius Undermount Single Bowl PADA-3318DU-** 33" x 18" x 5"/5 1/2"/6"D PRISM ADA Zero Radius Undermount 50/50 Double Bowl Page 7 of 9
8 PRI-1718BS 17" x 18" x 10"D Prism Series Undermount Bowl Bar Sink PRI-1718BS " x 18" x 6.5"D Prism Series Undermount Bowl Bar Sink PRI-2318S 23" x 18" x 10"D Prism Series Undermount Single Bowl PRI-2318S " x 18" x 6.5"D Prism Series Undermount Single Bowl PRI-239BT 23" x 8 1/2" x 6"D Prism Trough Series Undermount Bar Sink PRI-3218S 32" x 18" x 10"D Prism Gourmet Undermount Large Single Bowl PRI-3218S " x 18" x 6.5"D Prism Gourmet Undermount Large Single Bowl PRI-329BT 32" x 8 1/2" x 6"D Prism Trough Series Undermount Bar Sink PRI-3312BT 33" x 8 1/2" x 6"D Prism Trough Series Undermount Curved Bowl Bar Sink PRI-3318D 33" x 18" x 10"D Prism Series Undermount 50/50 Double Bowl PRI-3318D " x 18" x 6.5"D Prism Series Undermount 50/50 Double Bowl PRI-3318DR/L 33" x 18" x 10"D Prism Series Undermount 70/30 Double Bowl PRI-3318DR/L " x 18" x 6.5"D Prism Series Undermount 70/30 Double Bowl PRI-429BT 40" x 8 1/2" x 6"D Prism Trough Series Undermount Bar Sink PRI-4318S 43" x 18" x 10"D Prism Series Undermount Zero Radius Triple PRI-4512BT 45" x 8 1/2" x 6"D Prism Trough Series Undermount Curved Bowl Bar Sink REN-3218S 31.56" x 17.81"D RENDEZVOUS Series Dual Level Undermount Large Single Bowl REV-1722ST-6.5-* 17" x 22" x 6 1/2"D ADA Revive Series Topmount Bar Sink REV-2021ST-7-* 20 5/8" x 21" x 7"D Revive Series Topmount Single Bowl REV-2522ST-**-* 25" x 22" x 6 1/2"D Revive Series Topmount Single Bowl REV-2522ST-6-* 25" x 22" x 6"D Revive Series Topmount Single Bowl REV-2522ST-7-* 25" x 22" x 7"D Revive Series Topmount Single Bowl REV-2522ST-8-* 22" x 22" x 8"D Revive Series Topmount Single Bowl REV-2522ST-9-* 25" x 22" x 9"D Revive Series Topmount Single Bowl REV-3120DT-7-* 31" x 20 1/2" x 7"D Revive Series Topmount Double Bowl REV-3120DT-8-* 31 1/2" x 20 5/8" x 8"D Revive Series Topmount Double Bowl REV-3319ST-6-* 33" x 19" x 6"D Revive Series Topmount Double Bowl REV-3319ST-7-* 33" x 19" x 7"D Revive Series Topmount Double Bowl REV-3322DRT-* 33" x 22" x 8"D Revive Series Topmount 60/40 Double Bowl REV-3322DT-**-* 33" x 22" x 6 1/2"D ADA Revive Series Topmount Double Bowl 3 or 4 Hole REV-3322DT-7-* 33" x 22" 7"D Revive Series Topmount 50/50 Double Bowl REV-3322DT-8-* 33" x 22" x 8"D Revive Series Topmount 50/50 Double Bowl REV-3322DT-9-* 33" x 22" x 9"D Revive Series Topmount 50/50 Double Bowl REV-3322ST-6-* 33" x 22" x 6"D Revive Series Topmount 50/50 Double Bowl TADA-1722ST-** -* 17" x 22" x 5"/5 1/2"/6"/6-1/2"D ADA Topmount Single Bowl TADA-1919ST-** -* 19.5" x 19.5" x 5"/5 1/2"/6"/6 1/2"D ADA Topmount Sink Single Bowl TADA-2217ST-** -* 22" x 17" x 5"/5 1/2"/6"/6 1/2"D ADA Topmount Sink Single Bowl TADA-2220ST-** -* 22" x 19" x 5"/5 1/2"/6"/6 1/2"D ADA Topmount Sink Single Bowl TADA-2222ST-** -* 22" x 22" x 5"/5 1/2"/6"/6 1/2"D ADA Topmount Sink Single Bowl TADA-2522ST-** -* 25" x 22" x 5"/5 1/2"/6"/6 1/2"D ADA Topmount Sink Single Bowl TADA-3322DT-** -* 33" x 22" 5"/5 1/2"/6"/6 1/2"D ADA Topmount Sink Double Bowl TUR-3232-DCT 31.89" x 31.89" x 8"D Tureen Series Topmount Corner Bowl TUR-3322DT 33" X 22" X 8"/ 5 1/2" D Tureen Series Topmount 70/30 Double Bowl VIT-2418S 23.19" x 17.95" x 8"D Vitality Series Undermount Single Bowl VIT-3218D 31.5" x 17.95" x 8"D Vitality Series Undermount 50/50 Double Bowl VIT-3218DL 31.5" x 17.95" x 8"/5 1/2" DVitality Series Undermount 70/30 Double Bowl VIT-3221DR/L 31.5" x 20"/17.95" x 8" DVitality Series Undermount 60/40 Double Bowl Page 8 of 9
9 Note: *: number of holes **: Depth R: Small Bowl right L: Small Bowl Left Page 9 of 9
Effective Date: not available -Rev. 12/1/2017- Void After: Product: Water Closets with Dual Flush Feature File No. 5645
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationEffective Date: May 2017 Void After: May Product: Press and Nail Connections File No. M-8332
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationEffective Date: January 2018 Void After: January Product: Fill Valves (Anti-Siphon) File No. 3733
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationEffective Date: October 2017 Void After: October Product: Ceramic Plumbing Fixtures File No. 2467
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationEffective Date: December 2017 Void After: December 2018
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationEffective Date: February 2018 Void After: February Product: Bathtubs (Plastic) File No. 3638
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationEffective Date: April 2018 Void After: April 2019
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationSuction fittings for use in swimming pools, wading pools, spas, hot tubs, and other aquatic facilities.
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationEffective Date: May Rev. 6/18/2018- Void After: May Product: Plumbing Fixture Fittings File No. 3489
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationEffective Date: July 2016 Void After: July Product: ABS-DWV Pipe and Fittings File No. 9266
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationCalifornia Lead Plumbing Law Devices and Components
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationSINK CATALOG U.S. WAREHOUSE. GSP Surfaces 7318 South Yale, Suite B, Tulsa, OK
SINK CATALOG U.S. WAREHOUSE GSP Surfaces 7318 South Yale, Suite B, Tulsa, OK 74136 918.895.6300 www.gspsurfaces.com QUARTZ COMPOSITE Made with 80% Quartzite, 20% Acrylic Heat Resistant to 550 Degrees Completely
More informationEffective Date: July 2018 Void After: July Product: Plumbing Fixture Fittings File No. 4155
IAPMO Researh and Testing, In. is a produt ertifiation body whih tests and inspets samples taken from the supplier's stok or from the market or a ombination of both to verify ompliane to the requirements
More informationTopmount, Undermount & Apron Front
CAST IRON SINKS Topmount, Undermount & Apron Front Properties Style: The gorgeous hues of KOHLER Enamelled let you bring your personality into your kitchen decor. Its rich finish and long-lasting presence
More information15-3/16" [385] 10-5/8" [270] [25] GBG1318SS Fits bowl size 13-1/2" X 18" 22-3/4" [578] GBG2416SS Fits bowl size 24" X 16" 13-15/16" [353] [341]
FEATURES Nickel-bearing stainless steel Bright finish Gray feet Designed to fit specific sink bowl geometry Dishwasher safe 15-3/16" [385] SPECIFICATIONS 11-1/16" [281] 12-7/16" [316] 10-5/8" [270] GBG1318SS
More informationType N-10, N-11 Hazardous Area Non-incendive Transmitters
Electronic Pressure Catalog > Hazardous Area > N-10, N-11 Type N-10, N-11 Hazardous Area Non-incendive Transmitters Applications Natural gas compressors Wellhead monitoring Pipeline pressure General industrial
More informationEVALUATION SUBJECT: DIVISION: HEATING, VENTILATING AND AIR CONDITIONING (HVAC) SECTION: HVAC DUCTS AND CASINGS.
ICC-ES Report PMG-1171 Reissued 11/2018 This report is subject to renewal 11/2019 EVALUATION SUBJECT: UNDERGROUND SINGLE WALL & DOUBLE WALL INSULATED DUCT FOR HVAC DIRECT BURIAL APPLICATIONS AND UNDERGROUND
More informationSTEP 3 GLASS FINISHES. Empire Floral Victorian Deco Tulip Tulip Border Traditional Roman Battuto Confetti Tebori Arabesque Palmier
RIMLESS UNDERMOUNT Color & Finish Guide 2.1.1 Color & Finish Guide for Items: 203, 213, 253, 263 Choose a combination of Glass Color and Glass Finish for this item using the table below. Please contact
More informationEVALUATION SUBJECT: PUSH FIT FITTINGS DIVISION: PLUMBING SECTION: DOMESTIC WATER PIPING. Report Holder:
ICC-ES Report PMG-1149 Reissued 08/2017 This report is subject to renewal 08/2018 EVALUATION SUBJECT: PUSH FIT FITTINGS DIVISION: 22 00 00 PLUMBING SECTION: 22 11 16 DOMESTIC WATER PIPING Report Holder:
More informationEVALUATION SUBJECT: CAST IRON SOIL PIPE AND FITTINGS DIVISION: PLUMBING SECTION: SANITARY WASTE AND VENT PIPING.
ICC-ES Report PMG-1407 Reissued 10/2017 This report is subject to renewal 10/2018 EVALUATION SUBJECT: CAST IRON SOIL PIPE AND FITTINGS DIVISION: 22 00 00 PLUMBING SECTION: 22 13 16 SANITARY WASTE AND VENT
More informationUndermount SM1180C. Undermount triple bowl 18 Gauge-T-304 Series- 18/10 chrome-nickel Bowl depths: 9,7 & 9
SM1180C SBG4740 triple bowl Bowl depths: 9,7 & 9 $608 $625 24 *Accessory Description on p. 14 SM3121-R SM3121-L SBG4745 offset double bowl 18/ 10 chrome-nickel 9 deep large bowl on left, offset drains
More informationFABRICATORS SUPPLY SINK & FAUCET REFERENCE GUIDE. Air Switch WD3428SN. Sink MHK110-28WH. Soap Dispenser SD3450. Faucet FF3450
FABRICATORS SUPPLY SINK & FAUCET REFERENCE GUIDE 2018 Sink MHK110-28WH Faucet FF3450 Soap Dispenser SD3450 Air Switch WD3428SN Cold Water Faucet DW13050 1 UNDERMOUNT - STAINLESS STEEL 3 Easy Steps for
More informationMiramar Templates & Pans
Miramar Templates & Pans Enhance Your Buffet Presentation! Miramar Resin Templates n Durable FDA approved thermoset resin construction ideal for hot or cold applications n Heat resistant to 300 F (48.8
More informationBold items indicate stocking items
Part # Model Description Size List Price ACRYLIC SERIES Double Bowls Undermount - available in (B) & White (W)-To specify the color insert code after 900K in the 900K Meridian Meridian Double equal bowl
More informationOriginally Issued: 10/08/2010 Revised: 10/27/2017 Valid Through: 10/31/2018
ITW BUILDING COMPONENTS GROUP INC. ITW ALPINE HANGERS AND ANCHORS CSI Section: 06 05 23 Wood, Plastic and Composite Fastenings 1.0 RECOGNITION ITW Alpine Hangers and Anchors recognized in this report has
More informationGirls U11 Flight - Premier Purple Rank Team Name Girls U11 Flight - Premier Orange Rank Team Name
Girls 2008 - U11 Flight - Premier Purple Rank Team Name Girls 2008 - U11 Flight - Premier Purple 1 La Roca - NO/TC Girls 2008 - U11 Flight - Premier Purple 2 USA Premier 08G - GT Girls 2008 - U11 Flight
More informationHigh Performance BSP Dial Up Pattern Pressure Reducing Valve
See our full range online at: www.vip-ltd.co.uk High Performance BSP Dial Up Pattern Pressure Reducing Valve VIP Product Code 31/0103 FUNCTION Pressure reducing valves are devices which, when installed
More informationProcess Filtration From Pure to Sterile
From Pure to Sterile MAIN FEATURES & BENEFITS: Developed for the sterile filtration of air and gases in compressed gas applications as well as venting applications. High dirt holding capacity at a low
More informationPREMIUM QUALITY KITCHEN SINKS PRICE LIST
PREMIUM QUALITY KITCHEN SINKS PRICE LIST Effective April, 2015 This price list supersedes all previous price lists. www.empire-industries.com info@empire-industries.com Table of Contents Olde London (Fire
More informationPresented to the IAPMO Standards Review Committee on March 7, 2016
Summary of Substantive Changes between the 2015 edition of ASSE 1070/ASME A112.1070/CSA B125.70, Water Temperature Limiting Devices, the 2004 edition of ASSE 1070, Water Temperature Limiting Devices, and
More informationTurbine Flowmeters for Gas Applications
Turbine Flowmeters for Gas Applications Description Flow Technology s FT Series turbine flowmeters utilize a proven flow measurement technology to provide exceptionally reliable digital outputs. Because
More informationGrade 2 Interconnected Locksets DORMA J200
Grade 2 Interconnected Locksets DORMA J200 Table of Contents Features DORMA s J200 Series Grade 2 interconnected locksets provide exceptional security, enhanced aesthetics, and rugged dependability. These
More informationPage 1 of 6 CBOE org/cboe Membership CBSX Site CFE Site Int'l Sites RMC Site Careers Contact Search Quotes Delayed Option Chains Enter a Stock or Index symbol below. For LEAPS, enter the LEAPS symbol &
More informationPEM-EX-C. Figure: PEM-EX-C*A*G. ka054000en; Rev. 2.7 J
PEM-EX-C J2013329 Figure: PEM-EX-C*A*G Robust and safe pressure transducer for general mining applications In combination with a Kirchgaesser multi channel signal converter and display unit COMBA-EX or
More informationSubmittal / Substitution Request
Submittal / Substitution Request SUBMITTED TO: To: Firm: Project: Submitted Product: SIMPSON STRONG-TIE WEDGE-ALL WEDGE ANCHOR Specified Product: Section: Page: Detail/Sheet No.: Description of Application:
More informationPreferred Instruments Danbury, CT USA
Tank Level Sensor Model TG-EL-WF-xx Installation & Operation Instructions SDI-TG-EL-WF March 6, 2006 Preferred Instruments Danbury, CT USA www.preferredinstruments.com CONTENTS Installation Pg. 2 Calibration
More informationSECTION SHOWER AND BATH ENCLOSURES. Display hidden notes to specifier by using Tools / Options / View / Hidden Text.
SECTION 10185 SHOWER AND BATH ENCLOSURES Display hidden notes to specifier by using Tools / Options / View / Hidden Text. PART 1 GENERAL 1.1 SECTION INCLUDES A. Bathtub wall enclosures. B. Shower wall
More informationIf you want to offer a more professional look to your
Model RT366 Model RT364C Low profile island trim 11" (279) griddle (optional) Porcelain coated cast iron top grates Dual brass burners 36" GAS RANGETOPS Model RT364G Stainless steel exterior finish Large
More informationASSE International Product (Seal) Listing Program
Manufacturer Contact Person Address ASSE International Product (Seal) Listing Program ASSE 07-05 / ASME A.9.07-05 / CSA B5.7-5 Pressurized Flushing Devices for Plumbing Fixtures Laboratory File Number
More informationHIGH PRESSURE CONTROL VALVES
METERING VALVE APPLICATIONS: This valve can be used to meter or control flow of liquids and/ or gases on meter runs, flow lines, or may be used as a choke under low pressure drop conditions where freezing
More informationTable of Contents Auxiliary Locks
Copyright 2003, 2004, 2007-2013, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Table of Contents SSL1 Spring Latch For Security SideLight Applications...1 8200 Series
More informationGeometric Style Die Head Chasers
Geometric Style Die Head Chasers REGULAR EXTENDED OFFSET REGULAR STYLE "K" STYLE "K" ESSENTIALS: The following pages list Geometric style die head chasers in many popular diameter and pitch combinations.
More informationHANGERS & SUPPORTS CLIP-IT CLIP-IT STUD STRAPS BAR JOIST CLIP CONDUIT HANGERS CLIP-IT
62 hangers & supports Innovation. It s what Madison is all about. Check out our Madison Strap, the product that started it all. Invented in 1929 by our founder Earl Adkinson, Madison has been on the cutting
More information1 Overview. Pressure Measurement Single-range transmitters for general applications. 1/22 Siemens FI US Edition
Siemens AG 07 SITRANS LH00 Transmitter for hydrostatic level Overview Function U const. p U I EM The pressure transmitter SITRANS LH00 is a submersible sensor for hydrostatic level measurement. The pressure
More informationProportional Relief Valves
www.swagelok.com Proportional Relief Valves R Series Liquid or gas service Set pressures from 10 to 6000 psig (0.68 to 413 bar) 1/4 and 1/2 in. and 6 to 12 mm end connections 2 Proportional Relief Valves
More informationEmergency Shower & Eyewash. Training Guide
Emergency Shower & Eyewash Training Guide No matter how many precautions employees take, accidents sometimes happen. In these situations quick action is essential, and if the incident involves a hazardous
More informationTurbine Flowmeters for Gas Applications
Turbine Flowmeters for Gas Applications Description Flow Technology s FT Series turbine flowmeters utilize a proven flow measurement technology to provide exceptionally reliable digital outputs. Because
More informationCATALOGUE // The Fort Vale Range of Equipment to suit Hydrogen Peroxide Tank Specification. Fort Vale Engineering Ltd. 2009
CATALOGUE // 20 19 18 16 17 The Fort Vale Range of Equipment to suit Hydrogen Peroxide Tank Specification 15 14 Fort Vale Engineering Ltd. 2009 THIS PAGE IS INTENTIONALLY BLANK HYDROGEN PEROXIDE EQUIPMENT
More informationEVALUATION SUBJECT: PUSH FIT FITTINGS DIVISION: PLUMBING SECTION: DOMESTIC WATER PIPING. Report Holder:
ICC-ES Report PMG-1256 Reissued 10/2017 This report is subject to renewal 06/2018 EVALUATION SUBJECT: PUSH FIT FITTINGS DIVISION: 22 00 00 PLUMBING SECTION: 22 11 16 DOMESTIC WATER PIPING Report Holder:
More informationASSE International Product (Seal) Listing Program
ASSE International Product (Seal) Listing Program ASSE 1070-2015 / ASME A112.1070-2015 / CSA B125.70-15 Performance Requirements for Water Temperature Limiting Devices Manufacturer: Contact Person: E-mail:
More informationIf you want to offer a more professional look to your
Infrared griddle (optional) Porcelain-coated cast iron top grates Model RT366 Low-profile island trim Dual brass burners Model RT364C Location of rating plate Model RT364G Stainless steel exterior finish
More informationHIGH NUMBER 2018 HOBBY MAJOR LEAGUE BASEBALL
HOBBY MAJOR LEAGUE BASEBALL CONTINUE COLLECTING THE CLASSIC 1969 TOPPS BASEBALL DESIGN IN THIS YEAR S TOPPS HERITAGE BASEBALL, AND COMPLETE YOUR SET WITH SPECTACULAR ROOKIE CALL-UPS AND TRADED VETERAN
More informationDescriptions INCLUDES (2) 1500WC WIRE CLIP; WITH 1/2 INCH, 3/4 INCH CONCENTRIC KNOCKOUT ON BASE
3804 South Street 75964-7263, TX acogdoches Phone: 936-569-7941 Fax: 936-560-4685 1542D STL Junction Box 1500 Wiremold/Legrand Catalog umber Manufacturer Description Weight per unit Product Category Features
More informationIECEx Certificate of Conformity
INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com Certificate No.: IECEx CML 14.0034X Issue No:
More informationTUBE SIGN POST PRODUCTS
Western Canada TUBE Products Ltd. SIGN POST PRODUCTS Company Profile With over 100 years of experience on staff and the largest inventory in Western Canada, we have the ability to meet all your sign support
More informationGM-7000 Series CE Approved Gas Control Valve
Product Bulletin Issue Date November 16, 2012 GM-7000 Series CE Approved Gas Control Valve The GM-7000 Series multi-function gas control valve works in conjunction with an electronic sequence control unit
More information1 Overview. Pressure Measurement Single-range transmitters for general applications. 1/22 Siemens FI
Siemens AG 06 SITRANS LH00 Transmitter for hydrostatic level Overview Function U const. p U I EM The pressure transmitter SITRANS LH00 is a submersible sensor for hydrostatic level measurement. The pressure
More informationOriginally Issued: 10/08/2010 Revised: 10/30/2015 Valid Through: 10/31/2016
EVALUATION SUBJECT: ITW ALPINE HANGERS AND ANCHORS REPORT HOLDER: ITW Building Components Group Inc. 13825 W. Business Center Dr. Unit A Lake Forest, IL 60045 (800) 521-9790 www.alpineitw.com CSI Division:
More informationIA CERTIFICATE (Revision 3 Revised for Annual Review) Hazel Grove Stockport Cheshire SK14 6NG United Kingdom
Certificate Number: MASC MS/11-358X Issued: 22 September 2014 Expire: 22 September 2015 Page: 1 of 5 IA CERTIFICATE (Revision 3 Revised for Annual Review) IN TERMS OF REGULATION 21.17.2 OF THE MINERALS
More informationIntelligent Traffic Systems:
Printed on Cocoon Silk. Made with 100% FSC postconsumer waste. Cocoon Silk is 100% FSC recycled paper, process chlorine free. Please read and recycle Siemens Intelligent Traffic Systems Sopers Lane Poole
More informationIAPMO IS PUBLIC REVIEW DRAFT Thrust Blocking for Rubber Gasketed and Solvent Cement Joints
IAPMO IS 33-2019 PUBLIC REVIEW DRAFT Thrust Blocking for Rubber Gasketed and Solvent Cement Joints IAPMO Standard IAPMO IS 33 2019 Published: Month Year Published by International Association of Plumbing
More informationPressure Measurement Single-range transmitters for general applications
Siemens AG 07 Overview Function U const. p U I EM Sensor Connection for auxiliary power supply Vent pipe with humidity filter Protective conductor connection/ Equipotential bonding Diaphragm The pressure
More informationWEDGE-ALL Wedge Anchors
WEDGE-ALL Wedge Anchors The Wedge-All wedge anchors are a non-bottom bearing, wedge-style expansion anchor for use in solid concrete or grout-fi lled masonry. A one-piece clip ensures uniform holding capacity
More informationMicro Motion 7812 Fiscal Gas Density Meter
Product Data Sheet PS-001162, Rev. B April 2009 Micro Motion 7812 Fiscal Gas Density Meter Micro Motion density and concentration meters are built to tackle the most demanding process and fiscal applications.
More informationAir Amplifiers & SYSTEMS
Air Amplifiers & SYSTEMS We Accept VISA, MasterCard and American Express Air Amplifiers Point-of-Use Air Solutions Maximator air amplifiers are designed to boost plant air pressure or increase the supply
More informationElcometer Viscosity Cup. Operating Instructions
Elcometer 2350 2351 2352 2353 2354 English Viscosity Cup Operating Instructions English is a registered trademark of Elcometer Limited. All other trademarks acknowledged. Copyright Elcometer Limited. 2009/2010.
More informationB104ZN BLTD 4H 90 L Bracket. Features. Material, Color, and Finish. Dimensions and Weight. Long Description
B104 BLTD 4H 90 L Bracket Cooper B-Line/Cable Tray Catalog Number Manufacturer Description Weight per unit Product Category Features Material Material, Color, and Finish Finish Dimensions and Weight Size
More informationCompact differential pressure switch Flameproof enclosure Ex d Models DE, DEC
Mechatronic pressure measurement Compact differential pressure switch Flameproof enclosure Ex d Models DE, DEC WIKA data sheet PV 35.41 Process Compact Series Applications Differential pressure monitoring
More informationPull Handles & Push Plates General hardware
Pull Handles & Push Plates General hardware The Legge range of push and pull plates are ideally suited to heavy duty applications such as hospitals, schools and high usage public facilities. The products
More informationCALEFFI. Pre-adjustable pressure reducing valves with self-contained cartridge series 01085/17 GB. replaces 01085/14 GB
Pre-adjustable pressure reducing valves with self-contained cartridge - series CCREDITED ISO 9 FM CLEFFI /7 GB replaces / GB Function Pressure reducing valves are devices which, when installed on private
More informationWater Hammer Arrestors
Water Hammer rrestors watts.com What is Water Hammer? T he noise from banging pipes is caused by shocks of high speed water flowing in the piping system when a fixture is suddenly closed. Sudden stoppage
More informationElcometer 123. Surface Profile Gauge. Operating Instructions
Elcometer 123 English Surface Profile Gauge Operating Instructions English is a registered trademark of Elcometer Limited. All other trademarks acknowledged. Copyright Elcometer Limited. 2009. All rights
More informationDRIVER VOLTAGE DRIVER TYPE. DM v Low Voltage Dimming (10% - 100%) (Standard) LV - Line Voltage Dimming *Specify Voltage (120v or 277v)
The Ovation Series LED Retrofit system has been developed to dramatically improve existing recessed troffer performance using Solid State Lighting (SSL) technologies. The Ovation retrofit series provides
More informationADA STANDARD OVERVIEW AND SPEAKMAN APPLICABLE PRODUCTS
ADA STANDARD OVERVIEW AND SPEAKMAN APPLICABLE PRODUCTS ADA PRODUCT TRAINING PG. 1 Specs are for reference only. Please refer ADA.gov for the latest requirements. ADA What is the Americans with Disabilities
More informationTXXX - XX - XXXXX (XXX) X4 - XXX XX
ASTM TUBE PART NUMBER MATRIX TXXX - XX - XXXXX (XXX) X4 - XXX XX PROCESS CODE ALLOY CODE (SEE NOTE 1) SIZE CODE (SEE NOTE 3) USED WALL CODE SURFACE FINISH & VISUALS T1A = PER SP-9204 (101) 0S = 316L SEAMLESS
More information1 piece $ Comes standard with EMQ ABEC 5 steel bearing. Ceramic hybrids available for an upcharge.
Page 1 of 5 Hubs Art.-No. specification per Retail Alchemy Elf Front hub for road -16, 18, 20, 24, 28, 32h - 65g - Radial okay, except on 32h - Black, Silver 1 piece $180.00 Comes standard with EMQ ABEC
More informationSAFEsystem. Safety Apparatus Filter Enhancement. Filtration Systems. Now you can safely control your filtering process
Now you can safely control your filtering process BROCHURE C1 SAFEsystem TM Safety Apparatus Filter Enhancement Available on Individual, Duplex or Multi-Housing ASME Code filter systems. Filtration Systems
More informationSafety valves. Component-tested safety valves DN Compressed Air Accessories II Hoses, valves etc. 15. Technical data. Exhaust capacity air
Component-tested s DN 6 Safety valves serve to blow out non-poisonous and non flammable gases into the atmosphere in order to protect pressure tanks against overpressure. Please note: Only s that have
More informationTERMS & OTHER IMPORTANT INFORMATION
PRICEBOOK 2014 TERMS & OTHER IMPORTANT INFORMATION LEAD TIME SHIPPING PAYMENT RETURNS Items in stock ship in 48 hours. Please call for current lead time on items that are not in stock. UPS Ground & Freight
More informationT900. Grade 2 Tubular Locksets
T900 Grade 2 Tubular Locksets T900 GRADE 2 TUBULAR LOCKSETS CONTENTS Grade 2 Tubular Locksets Features 3 Technical Details 3 How to Order 4 Trim Designs T900 Standard Levers 4 T900 Premium Levers Wrought
More informationDecorative Accessories Guide
Decorative Accessories Guide Monogram Brass is a trademark of Ferguson Enterprises, Inc. Monogram Brass Finishes Brushed Nickel* (BN) Oil Rubbed Bronze (ORB) Polished Brass* (PB) Chrome (CP) Biscuit (BISC)
More informationGAS SAFETY Information Bulletin
GAS SAFETY Information Bulletin June 2016 G-03-11-ABSA [Rev2] Page 1 of 7 Fuel Gas Pressure Piping in Plants This bulletin has been jointly developed by Safety Services, the Pressure Equipment Sub- Council,
More informationMiller Falcon Edge Self-Retracting Lifeline When the Job Takes You to the Edge: Depend on Miller
FALL PROTECTION FREQUENTLY ASKED QUESTIONS Miller Falcon Edge Self-Retracting Lifeline When the Job Takes You to the Edge: Depend on Miller Q1: What is a Leading Edge Self-Retracting Lifeline (SRL)? A1:
More informationGeneral Performance Data Hose Ref Minimum Bend. Safety Pressure at 20 C (BAR) Working Pressure at. Flow Rate at 3 bar (lit/min) Working Pressure
The Classic range provides a safe and taint free conveyance of potable water supplies for Domestic and Commercial plumbing applications. The range is designed to achieve robust and flexible solutions with
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAA0000123 This is to certify: That the Pressure Transmitter with type designation(s) SITRANS P series DS III, P310, P410 Issued to Siemens AG - Process Industries
More informationASYBCO 90 O ELBOW LONG RADIUS O.D. I.D.
90 O ELBOW LONG RADIUS Standard weight Extra strong Schedule 160 Double extra strong ASTM A-234 ASME / ANSI B16.9 Carbon and ferritic alloy steel Produced from X-rayed, stress-relieve welded pipe. Welds
More informationQualification Test Specifications for Dissolution Test Systems
35 for Vantage Dissolution Point Drive, Rochester NY Test 14624 Systems Phone: 800-828- 1470 Fax: 800-395- 0543 Transcat.com Test Set Points/Range Acceptance Criteria Rotational Speed Runout (Wobble) Shaft
More informationHIGH PRESSURE CONTROL VALVES
METERING VALVE APPLICATIONS: This valve can be used to meter or control flow of liquids and/ or gases on meter runs, flow lines, or may be used as a choke under low pressure drop conditions where freezing
More informationTest pumps. Pressure sources. Good reasons for proper and reliable calibration
Test pumps Pressure is one of the most commonly measured quantities in engineering, which is why exact and reliable pressure measurement is especially important. However, the characteristics of the even
More informationIAPMO GUIDE CRITERIA FOR BALL VALVES IAPMO IGC PURPOSE
INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS IAPMO GUIDE CRITERIA FOR BALL VALVES IAPMO IGC 157-20067 1 PURPOSE 1.1 The purpose of this standard is to establish an acceptable standard
More informationDIVISION: 06--WOOD AND PLASTICS SECTION: Wood, Plastic and Composite Fastenings
DIVISION: 06--WOOD AND PLASTICS SECTION: 060523 -- Wood, Plastic and Composite Fastenings REPORT HOLDER: ITW BUILDING COMPONENTS GROUP, INC. 2400 LAKE ORANGE DRIVE, SUITE 150 ORLANDO, FLORIDA 32837 (800)
More informationTranslation Principles of testing and certification for insulating hose assemblies on cable cutting devices
Translation Principles of testing and certification for insulating hose assemblies on cable cutting devices Status as of 2014-01 Principles of testing Insulating hose assemblies on cable cutting devices
More informationCertification of AMS acc. EN 15267, Part 3 - Overview and First Experience -
Certification of AMS acc. EN 15267, Part 3 - Overview and First Experience - Dr. Wolfgang Jockel, Martin Schneider, TÜV Rheinland Group, D-51105 Cologne / Germany 1. Introduction A new basis for the certification
More informationGAS DISTRIBUTION PRODUCTS TRANSITION FITTINGS
GAS DISTRIBUTION PRODUCTS TRANSITION FITTINGS CONTINENTAL INDUSTRIES, INC. The Ultimate Connection CONTINENTAL INDUSTRIES, INC. ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, Inc.,
More informationDuPont Kalrez PARTS AVAILABILITY LIST
Kalrez PARTS AVAILABILITY LIST Standard parts list AS-568A O-rings Availability Many AS-568A O-rings in standard compounds compounds may be available may be for available immediate for shipment immediate
More informationAustralian/New Zealand Standard
AS/NZS 3788:2006 AS/NZS 3788:2006 Australian/New Zealand Standard Pressure equipment In-service inspection AS/NZS 3788:2006 This Joint Australian/New Zealand Standard was prepared by Joint Technical Committee
More informationTurbine Flowmeters for Gas Applications (Metric)
Turbine Flowmeters for Gas pplications (Metric) Description Flow Technology s FT Series turbine flowmeters utilize a proven flow measurement technology to provide exceptionally reliable digital outputs.
More informationCalCheck. Instrument User Manual V1.8
CalCheck Instrument User Manual V1.8 Unrivalled Part number: 21518 Detection. Part number: 21518 Declaration of conformity Manufacturer:, The Way, Fowlmere, Cambridge, England. SG8 7UJ Product: CalCheck
More informationFIRE DOOR CAPABILITY CHART - 20-MINUTE POSITIVE PRESSURE
FIRE DOOR CAPABILITY CHART - 20-MINUTE POSITIVE PRESSURE Fire Rating 5-Ply Wood HPDL Do Only Do w/ Transom 1 5509 909 5P09 9P09 over up to 5502 303 404 over up to 5P09 9P09 5P09 9P09 3-0 5508 5P08 8 8P08
More informationptfe and stainless steel hoses
ptfe and stainless steel hoses 3 table of contents Description P.004 Description of FX01 hoses P.004 Description of FX02 hoses P.004 Description of FX03 hoses P.005 Description of FX06 hoses P.005 DESCRIPTION
More information