TYPE APPROVAL CERTIFICATE
|
|
- Cameron Payne
- 6 years ago
- Views:
Transcription
1 DET NORSKE VERITAS TYPE APPROVAL CERTIFICATE CERTIFICATE NO. E This is to certify that the Terminal Block with type designation(s) ST-COMBI, ST, STS Issued to Phoenix Contact GmbH & Co. KG Blomberg, Germany is found to comply with Det Norske Veritas' Rules for Classification of Ships, High Speed & Light Craft and Det Norske Veritas' Offshore Standards Application Pluggable spring cage terminal blocks for use in Marine and Offshore Applications This Certificate is valid until Issued at Høvik on DNV local station: Essen CMC Western Germany for Det Norske Veritas AS Approval Engineer: Nicolay Horn Marit Laumann Head of Section This Certificate is subject to terms and conditions overleaf. Any significant change in design or construction may render this Certificate invalid. The validity date relates to the Type Approval Certificate and not to the approval of equipment/systems installed. If any person suffers loss or damage which is proved to have been caused by any negligent act or omission of Det Norske Veritas, then Det Norske Veritas shall pay compensation to such person for his proved direct loss or damage. However, the compensation shall not exceed an amount equal to ten times the fee charged for the service in question, provided that the maximum compensation shall never exceed USD 2 million. In this provision "Det Norske Veritas" shall mean the Foundation Det Norske Veritas as well as all its subsidiaries, directors, officers, employees, agents and any other acting on behalf of Det Norske Veritas. Form No.: TA 1411a Issue: Page 1 of 6
2 Name & Place of Manufacturer Phoenix Contact GmbH & Co. KG Flachsmarktstr Blomberg Germany Phoenix Feinbau GmbH & Co. KG Gustavstr Lüdenscheid Germany Phoenix Contact India Pvt. Ltd Dhatir Road, Village-Dhudhola Prithla, Palwal, Faridabad Haryana India Phoenix Contact Wielkopolska Spolka z.o.o. Ul. Celna Nowy Tomysl Poland Eviop Tempo S.A. Leoforos Kymis Vasilikon Greece Phoenix Contact Asia-Pacific (Nanjing) Co. Ltd. 36 Phoenix Road Jiangning Nanjing Nanjing Peoples Republic of China Product description Type ST-COMBI: Pluggable spring cage terminal blocks Type designation Rated Cross-section Rated Current Rated Voltage Part No. [mm 2 ] [A] [V] ST 2,5/ 1P 2, ST 2,5/ 2P 2, ST 2,5-TWIN/ 1P 2, ST 2,5-TWIN-MT/ 1P 2, ST 2,5-QUATTRO/ 2P 2, ST 2,5-QUATTRO/ 4P 2, STTB 2,5/ 2P 2, STTB 2,5/ 2P-PV 2, ST 2,5/ 1P-PE 2, ST 2,5/ 2P-PE 2, ST 2,5-TWIN/ 1P-PE 2, ST 2,5-QUATTRO/ 2P-PE 2, ST 2,5-QUATTRO/ 4P-PE 2, STTB 2,5/ 2P-PE 2, SC 2,5/ xx 2, SC 2,5-RZ/ xx 2, SC 2,5/1-L 2, SC 2,5-RZ/1-L 2, SP 2,5/ xx 2, SPB 2,5/ xx 2, SPDB 2,5/ xx 2, SP 2,5/1-L 2, SP 2,5/1-M 2, SP 2,5/1-R 2, SPB 2,5/1-L 2, SPB 2,5/1-M 2, SPB 2,5/1-R 2, SPDB 2,5/1-L 2, SPDB 2,5/1-M 2, SPDB 2,5/1-R 2, Form No.: TA 1411a Issue: Page 2 of 6
3 Type designation Rated Cross- Section Rated Current Rated Voltage Part No. (mm 2) (A) (V) ST 1,5 1,5 17, ST 1,5-PE 1, ST 1,5-TWIN 1,5 17, ST 1,5-TWIN-PE 1, ST 1,5-QUATTRO 1,5 17, ST 1,5-QUATTRO-PE 1, STTB 1,5 1,5 17, STTB 1,5-PV 1,5 17, ST 2,5 2, ST 2,5-PE 2, ST 2,5-TWIN 2, ST 2,5-TWIN-PE 2, ST 2,5-QUATTRO 2, ST 2,5-QUATTRO-PE 2, STTB 2,5 2, STTB 2,5-PV 2, ST ST 4-PE ST 4-TWIN ST 4-TWIN-PE ST 4-QUATTRO ST 4-QUATTRO-PE STTB STTB 4-PV ST ST 6-PE ST ST 10-PE ST ST 16-PE ST ST 35-PE TYPE STS: Spring cage feed-through terminal block Type designation Rated Cross Section Rated Current Rated Voltage (mm 2) (A) (V) Part No. STS 2,5 2, STS 2,5-MT 2, STS 2,5-PE 2, STS 2,5-QUATTRO 2, STS 2,5-QUATTRO-PE 2, STS 2,5-TG 2,5 16* 400* STS 2,5-TWIN 2, STS 2,5-TWIN-PE 2, STS STS 4-PE STS 4-QUATTRO STS 4-QUATTRO-PE STS 4-TWIN STS 4-TWIN/L STS 4-TWIN-PE Form No.: TA 1411a Issue: Page 3 of 6
4 Type designation Rated Cross Section Rated Current Rated Voltage (mm 2) (A) (V) Part No. STS STS 6-PE STS 6-TWIN STS 6-TWIN-PE STTBS 2,5 2, STTBS 2,5-LA 24 RD 2, STTBS 2,5-PE 2, STTBS 2,5-PV 2, STTBS STTBS 4-PE STTBS 4-PV * Current and voltage are determined by the plug used Material: Insulation housing: Polyamide 6,6 Contact bridge: HC copper, contact face tinned Clamping spring: Stainless Steel Application/Limitation Installation in according to Phoenix catalogue and DNV Rules. Type Approval documentation ST 2,5/ 1P VT-EL/Sb/Schu Rev. 00 ST 2,5/ 2P Lab/-ICT/Gro/Lin/Schu Rev. 00 ST 2,5-TWIN/ 1P Lab/-ICT/Gro/Lin/Schu Rev. 01 ST 2,5-TWIN-MT/ 1P Lab/-ICT/Gro/Lin/Schu Rev. 00 ST 2,5-QUATTRO/ 2P VT-EL/Sb/Schu Rev. 00 ST 2,5-QUATTRO/ 4P Lab/-ICT/Gro/Schu Rev. 01 STTB 2,5/ 2P Lab/-ICT/Gro/Lin/Schu Rev. 01 STTB 2,5/ 2P-PV Lab/-ICT/Gro/Lin Rev. 00 ST 2,5/ 1P-PE Lab/-ICT/Gro/Lin Rev. 00 ST 2,5/ 2P-PE Lab/-ICT/Gro/Lin/Schu Rev. 02 ST 2,5-TWIN/ 1P-PE Lab/-ICT/Gro/Lin/Schu Rev. 00 ST 2,5-QUATTRO/ 2P-PE Lab/-ICT/Gro/Lin Rev. 00 ST 2,5-QUATTRO/ 4P-PE Lab/-ICT/Gro/Lin Rev. 00 STTB 2,5/ 2P-PE Lab/-ICT/Gro/Lin Rev. 00 SC 2,5/ xx VT-EL/ Gro/Lin/Schu Rev. 01 SC 2,5-RZ/ xx Lab/-ICT/Gro/Lin Rev. 00 SC 2,5/1-L VT-EL/ Gro/Lin/Schu Rev. 01 SC 2,5-RZ/1-L Lab/-ICT/Gro/Lin Rev. 00 SP 2,5/ xx Lab/-ICT/Gro/Lin Rev. 00 SPB 2,5/ xx Lab/-ICT/Gro/Lin Rev. 00 SPDB 2,5/ xx Lab/-ICT/Gro/Lin Rev. 00 SP 2,5/1-L Lab/-ICT/Gro/Lin Rev. 00 SP 2,5/1-M Lab/-ICT/Gro/Lin Rev. 00 SP 2,5/1-R Lab/-ICT/Gro/Lin Rev. 00 SPB 2,5/1-L Lab/-ICT/Gro/Lin Rev. 00 SPB 2,5/1-M Lab/-ICT/Gro/Lin Rev. 00 SPB 2,5/1-R Lab/-ICT/Gro/Lin Rev. 00 Form No.: TA 1411a Issue: Page 4 of 6
5 SPDB 2,5/1-L Lab/-ICT/Gro/Lin Rev. 00 SPDB 2,5/1-M Lab/-ICT/Gro/Lin Rev. 00 SPDB 2,5/1-R Lab/-ICT/Gro/Lin Rev. 00 ST 1,5 VT-EL/Gro/Schu Rev. 00 ST 1,5-PE VT-EL/Gro/Schu Rev. 00 ST 1,5-TWIN VT-EL/Gro/Lin/Schu Rev. 01 ST 1,5-TWIN-PE VT-EL/Gro/Lin/Schu Rev. 01 ST 1,5-QUATTRO VT-EL/Gro/Lin/Schu Rev. 01 ST 1,5-QUATTRO-PE VT-EL/Gro/Lin/Schu Rev. 01 STTB 1,5 VT-EL/Gro/Schu Rev. 00 STTB 1,5-PV VT-EL/Gro/Schu Rev. 01 ST 2,5 Lab-ICT/Gro/Schu Rev. 01 ST 2,5-PE VT-EL/Gro/Schu Rev. 00 ST 2,5-TWIN VT-EL/Gro/Schu Rev. 00 ST 2,5-TWIN-PE VT-EL/Gro/Schu Rev. 00 ST 2,5-QUATTRO VT-EL/Gro/Schu Rev. 00 ST 2,5-QUATTRO-PE VT-EL/Gro/Schu Rev. 00 STTB 2,5 VT-EL/Gro/Lin/Schu Rev. 01 STTB 2,5-PV VT-EL/Gro/Schu Rev. 02 ST 4 VT-EL/Gro/Schu Rev. 02 ST 4-PE VT-EL/Gro/Schu Rev. 02 ST 4-TWIN VT-EL/Gro/Schu Rev. 02 ST 4-TWIN-PE VT-EL/Gro/Schu Rev. 02 ST 4-QUATTRO VT-EL/Gro/Schu Tev. 02 ST 4-QUATTRO-PE VT-EL/Gro/Schu Rev. 02 STTB 4 VT-EL/Gro/Schu Rev. 03 STTB 4-PV VT-EL/Gro/Schu Rev. 04 ST 6 VT-EL/Gro/Lin/Schu Rev. 01 ST 6-PE VT-EL/Gro/Schu Rev. 00 ST 10 VT-EL/Gro/Lin/Schu Rev. 01 ST 10-PE VT-EL/Gro/Schu Rev. 01 ST 16 VT-EL/Gro/Lin/Schu Rev. 01 ST 16-PE VT-EL/Gro/Schu Rev. 01 ST 35 VT-EL/Gro/Schu Rev. 01 ST 35-PE VT-EL/Gro/Schu Rev. 00 STS 2,5 LAB-ICT/Gro/Lin Rev. 03 STS 2,5-MT LAB-ICT/Gro/Lin Rev. 01 STS 2,5-PE LAB-ICT/Gro/Lin Rev. 01 STS 2,5-QUATTRO LAB-ICT/Gro/Lin Rev. 03 STS 2,5-QUATTRO-PE LAB-ICT/Gro/Lin/Schu Rev. 01 STS 2,5-TG LAB-ICT/Gro/Lin Rev. 01 STS 2,5-TWIN LAB-ICT/Gro/Lin Rev. 03 STS 2,5-TWIN-PE LAB-ICT/Gro/Lin Rev. 01 STS 4 LAB-ICT/Gro/Lin Rev. 03 STS 4-PE LAB-ICT/Gro/Lin Rev. 01 STS 4-QUATTRO LAB-ICT/Gro/Lin Rev. 02 STS 4-QUATTRO-PE LAB-ICT/Gro/Lin Rev. 01 STS 4-TWIN LAB-ICT/Gro/Lin Rev. 02 STS 4-TWIN/L LAB-ICT/Gro/Lin Rev. 01 STS 4-TWIN-PE LAB-ICT/Gro/Lin Rev. 01 STS 6 LAB-ICT/Gro/Schu Rev. 00 Form No.: TA 1411a Issue: Page 5 of 6
6 STS 6-PE LAB-ICT/Gro/Schu Rev. 00 STS 6-TWIN LAB-ICT/Gro/Schu Rev. 00 STS 6-TWIN-PE LAB-ICT/Gro/Schu Rev. 00 STTBS 2,5 LAB-ICT/Gro/Schu Rev. 02 STTBS 2,5-LA 24 RD LAB-ICT/Gro/Schu Rev. 00 STTBS 2,5-PE LAB-ICT/Gro/Lin Rev. 01 STTBS 2,5-PV LAB-ICT/Gro/Lin Rev. 02 STTBS 4 LAB-ICT/Gro/Lin Rev. 01 STTBS 4-PE LAB-ICT/Gro/Lin Rev. 00 STTBS 4-PV LAB-ICT/Gro/Lin Rev. 00 Tests carried out Type tests in accordance with IEC 61984, IEC , IEC , and vibration test in accordance with IEC and/or DIN EN and climatic test in accordance with IEC Marking of product Phoenix Contact - Type designation - Main data. (All type designation may be followed by suffix such as color or packaging options) Periodical assessment The scope of the periodical assessment is to verify that the conditions stipulated for the Type approval is complied with and that no alterations are made to the product design or choice of materials. The main elements of the survey are: Inspection on factory samples, selected at random from the production line (where practicable) Results from Production Sample Tests (PST) and Routines (RT) checked (if not available tests according to PST and RT to be carried out) Review of type approval documentation Review of possible change in design, materials and performance Ensuring traceability between manufacturer s product type marking and Type Approval Certificate. Survey to be performed at least every second year. END OF CERTIFICATE Form No.: TA 1411a Issue: Page 6 of 6
TYPE APPROVAL CERTIFICATE
DET NORSKE VERITAS TYPE APPROVAL CERTIFICATE CERTIFICATE NO. E-11781 This is to certify that the Electric Power Cable with type designation(s) CS 90 MBZH YZp & & 0,6/1 kv, CS 90 MBZH YZafp 0,6/1 kv
More informationN.I.V. Bluestar Plus
Innovative range of masks N.I.V. Bluestar Plus The air at service of breathing Lightness Seal Comfort KOO MEDICAL EQUIPMENT www.koomedical.com The comfort of the anatomic cushion NEW Facial Mask - Intensive
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAA0000123 This is to certify: That the Pressure Transmitter with type designation(s) SITRANS P series DS III, P310, P410 Issued to Siemens AG - Process Industries
More informationProduct(s) approved by this certificate is/are accepted for installation on all vessels classed by DNV GL.
Certificate No: TAP000006X This is to certify: That the Ballast Water Management System with type designation(s) Optimarin Ballast System, Optimarin Ballast System Ex Issued to Optimarin A/S Sandnes, Norway
More informationSLOP RECEPTION AND PROCESSING FACILITIES
RULES FOR CLASSIFICATION OF SHIPS NEWBUILDINGS SPECIAL SERVICE AND TYPE ADDITIONAL CLASS PART 5 CHAPTER 8 SLOP RECEPTION AND PROCESSING FACILITIES JANUARY 2011 CONTENTS PAGE Sec. 1 General Requirements...
More informationAssessment of Ships and Managers for the Acceptance of Extended Interval Between Bottom Surveys in Dry-Dock
CLASSIFICATION NOTES No. 72.2 Assessment of Ships and Managers for the Acceptance of Extended Interval Between Bottom Surveys in Dry-Dock MAY 2012 The electronic pdf version of this document found through
More informationREDUNDANT PROPULSION SHIPS RULES FOR CLASSIFICATION OF NEWBUILDINGS DET NORSKE VERITAS SPECIAL EQUIPMENT AND SYSTEMS ADDITIONAL CLASS PART 6 CHAPTER 2
RULES FOR CLASSIFICATION OF SHIPS NEWBUILDINGS SPECIAL EQUIPMENT AND SYSTEMS ADDITIONAL CLASS PART 6 CHAPTER 2 REDUNDANT PROPULSION JANUARY 1996 CONTENTS PAGE Sec. 1 General Requirements... 5 Sec. 2 System
More informationElectrical Shore Connections
RULES FOR CLASSIFICATION OF Ships / High Speed, Light Craft and Naval Surface Craft PART 6 CHAPTER 29 NEWBUILDINGS SPECIAL EQUIPMENT AND SYSTEMS ADDITIONAL CLASS Electrical Shore Connections JULY 2014
More informationAIR VENT HEADS STANDARD FOR CERTIFICATION DET NORSKE VERITAS. No. 2.9 Type Approval Programme No OCTOBER 2008
STANDARD FOR CERTIFICATION No..9 AIR ENT HEADS OCTOBER 008 eritasveien 1, NO-13 Høvik, Norway Tel.: +47 67 57 99 00 Fax: +47 67 57 99 11 FOREWORD (DN) is an autonomous and independent foundation with the
More informationRULES FOR CLASSIFICATION Yachts. Part 5 Ship types Chapter 3 Passenger Yachts. Edition December 2015 DNV GL AS
RULES FOR CLASSIFICATION Yachts Edition December 2015 Part 5 Ship types Chapter 3 Passenger Yachts The content of this service document is the subject of intellectual property rights reserved by ("DNV
More informationRULES FOR CLASSIFICATION Naval vessels. Part 1 Classification and surveys Chapter 5 Surveys for submarines. Edition January 2016 DNV GL AS
RULES FOR CLASSIFICATION Naval vessels Edition January 2016 Part 1 Classification and surveys Chapter 5 The content of this service document is the subject of intellectual property rights reserved by ("DNV
More informationRULES FOR CLASSIFICATION. Yachts. Part 5 Ship types Chapter 3 Passenger yachts. Edition October 2016 DNV GL AS
RULES FOR CLASSIFICATION Yachts Edition October 2016 Part 5 Ship types Chapter 3 The content of this service document is the subject of intellectual property rights reserved by ("DNV GL"). The user accepts
More informationPressure controls for hydro carbons, zone II applications, Type KPE
MAKING MODERN LIVING POSSIBLE Technical brochure Pressure controls for hydro carbons, zone II applications, Type KPE KPE pressure controls for use in refrigeration and air conditioning systems with hydrocarbons
More informationEPIC Rectangular Connector Inserts. HBE Series. Technical Data Number of Contacts:
HBE Series HBE series inserts provide reliable termination and performance in the vast majority of medium power and control applications. Methods of termination include screw, crimp, and spring cage clamp.
More informationLNG BOIL-OFF RE-LIQUEFACTION PLANTS AND GAS COMBUSTION UNITS
CASSIFICATION NOTES No. 61.2 NG BOI-OFF RE-IQUEFACTION PANTS AND GAS COMBUSTION UNITS MAY 2006 Veritasveien 1, NO-1322 øvik, Norway Tel.: +47 67 57 99 00 Fax: +47 67 57 99 11 FOREWORD (DNV) is an autonomous
More informationUNIK 5600/5700 Marine Certified Pressure Sensing Platform
GE Measurement & Control UNIK 5600/5700 Marine Certified Pressure Sensing Platform The new UNIK 5600/5700 carries marine certification for most zones on-board ship, as well as Intrinsically Safe certifications.
More information1 Overview. Pressure Measurement Single-range transmitters for general applications. 1/16 Siemens FI US Edition
Siemens AG 206 Overview Design Device structure without explosion protection The pressure transmitter consists of a piezoresistive measuring cell with a diaphragm installed in a stainless steel enclosure.
More informationDMK 458. Pressure Transmitter for Marine and Offshore. Ceramic Sensor. accuracy according to IEC 60770: standard: 0.25 % FSO option: 0.
Pressure Transmitter for Marine and Offshore Ceramic Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0. % FSO Nominal pressure from 0... 40 mbar up to 0... 0 bar Output signals -wire:
More informationMetal Expansion Joints. System solutions for reliable connections in plant engineering and construction.
Metal. System solutions for reliable connections in plant engineering and construction. GASKETS TECHNICAL TEXTILES EXPANSION JOINTS INSULATION NEW MATERIALS Standard- and tailor-made : economic solutions
More informationPressure transmitters EMP 2
Data sheet Pressure transmitters EMP 2 The high accuracy pressure transmitter EMP 2 is designed for monitoring and control in marine and industial applications and offers a reliable pressure measurement,
More informationSockets. terminations
Sockets Wire rope terminations Introduction With a dedicated team of professionals, a state-of-the-art production facility and global distribution, Ropeblock is the leading supplier for the lifting and
More informationCMC Series Moulded Case Circuit Breaker Cielo Electric
Model name CMC: Series 225: mpere frame size Line side terminal In: Rated current Ue: Rated operational voltage Icu: Rated ultimate short-circuit breaking capacity Ta: mbient temperature In: 225 Icu: 55k@415V
More informationFurther technical information is available on
1 of 5 Manufacture address : Bartec Technor AS Dusavikveien 39 4007 Stavanger Norway Further technical information is available on www.bartec-technor.no Note on instructions When working in hazardous areas,
More informationGuidelines to the standard IEC60601
EUROPEAN POWER SUPPLY MANUFACTURERS ASSOCIATION (Visit the EPSMA website at www.epsma.org) Medical Approvals for Power Supplies Guidelines to the standard IEC60601 Revision Date: 2009-09-12 This document
More information1 Overview. Pressure Measurement Transmitters for basic requirements. 1/16 Siemens FI SITRANS P220 for gauge pressure
Siemens AG 204 Overview The pressure transmitter SITRANS P220 measures the gauge pressure of liquids, gases and vapors. Stainless steel measuring cell, fully welded Measuring ranges 2.5 to 600 bar (36.3
More informationX2 Metallized Polypropylene Film Capacitor JFV
FEATURES: Non-inductive, (UL940V-0) plastic case sealed with epoxy resin. Provides interference suppression with VDE, ENEC and UL approvals. SPECIFICATIONS: Operating Temperature -40 ~ +110 Maximum Continuous
More informationPressure Measurement. Transmitters for basic requirements SITRANS P Z for gauge pressure. 2/4 Siemens FI Overview
f gauge pressure Siemens AG 010 Overview Design The main components of the pressure transmitter are: Brass housing with silicon measuring cell and electronics plate Process connection Electrical connection
More informationPRODUCT SPECIFICATION. SFP+ Cage and Cage Assembly 1 of 8 A
SFP+ Cage and Cage Assembly 1 of 8 A 1.0 Objective This specification defines the performance, test, quality and reliability requirements of the _Small Form-factor Pluggage (SFP+) product. 2.0 Scope This
More informationOFFSHORE. Trasfor OFFSHORE
OFFSHORE Trasfor OFFSHORE 2 Trasfor I Offshore Introduction Trasfor s transformers for offshore applications ensure the highest performance level of reliability in any working condition. More than 40 skilled
More informationHYDRAULIC CYLINDERS STANDARD FOR CERTIFICATION DET NORSKE VERITAS. No. 2.9 Type Approval Programme No OCTOBER 2009
STANDARD FOR CERTIFICATION No..9 HYDRAUIC CYINDERS OCTOBER 009 Veritasveien 1, NO-13 Høvik, Norway Tel.: +7 67 57 99 00 Fax: +7 67 57 99 11 FOREWORD (DNV) is an autonomous and independent foundation with
More informationOperating Instructions
LPL Series LED Pendant Lighting Operating Instructions IM0102 COOPER Electronic Technologies (Shanghai) Co., Ltd. No. 955 Shengli Road, East Area of Zhangjiang High-Tech Park, Shanghai 201201 China 1.
More informationTo: Relevant departments of CCS Headquarters, Plan approval centers, CCS surveyors, relevant shipyards, designers and shipping companies
Form: RWPRR401-B CCS Circular China Classification Society (2012) Circ. No. 14 Total No.176 January 29, 2012 (Total pages: 1+5 ) To: Relevant departments of CCS Headquarters, Plan approval centers, CCS
More informationSTABILITY AND WATERTIGHT INTEGRITY, CLOSING APPLIANCES
RULES FOR CLASSIFICATION OF HIGH SPEED, LIGHT CRAFT AND NAVAL SURFACE CRAFT STRUCTURES, EQUIPMENT PART 3 CHAPTER 6 STABILITY AND WATERTIGHT INTEGRITY, CLOSING APPLIANCES JANUARY 2011 CONTENTS PAGE Sec.
More informationCentriflow Plus High-pressure plug fan - Technical Data
Centriflow Plus 3 High-pressure plug fan - Technical Data Contents General description...3 General survey chart...4 Design description Fan Impeller...5 Fan Inlet...5 base with base frame...5 Hub...5 Air
More informationPSG 901. Pressure Switch for Gas. elektrogas.com EE141-07/12
PSG 901 Pressure Switch for Gas elektrogas.com EE141-07/12 PSG 901 Pressure Switch for Gas (EN1854) Contents Description... 2 Features... 2 Functioning and application... 3 Technical specifications...
More informationUNIK 5600/5700. Marine Certified Pressure Sensing Platform. High Quality. Features. Bespoke as Standard. Expertise. bhge.com
UNIK 5600/5700 Marine Certified Pressure Sensing Platform The new UNIK 5600/5700 carries marine certification for most zones on-board ship, as well as Intrinsically Safe certifications. Marine approval
More informationOperating Manual FSV, FSÖV, SSVF
Contents 1. General Remarks... 1 1.1. Marking... 2 1.2. Tightness of the Quick-Closing Valve... 2 1.3. Medium... 2 1.4. Ambient and Medium Temperature... 3 1.5. Vibrations... 3 1.6. Pipe Tensions... 3
More informationManual Power relay SR853
Manual Power relay SR853 Rev. 0 SR853 manual page2 Safety Guidelines for explosion proof devices Application and Standards This instruction manual applies to explosion protected control systems of protection
More informationTYPE APPROVAL CERTIFICATE
Page 1 / 4 Certificate number: 23445/A0 BV File number: AP 4160 Product code: 4440I This certificate is not valid when presented without the full attached schedule composed of 7 sections www.veristar.com
More informationIECEx Certificate of Conformity
INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com Certificate No.: IECEx CML 14.0034X Issue No:
More informationDifferential pressure controls, Type MP 54, 55 and 55A
MAKING MODERN LIVING POSSIBLE Technical brochure Differential pressure controls, Type MP 54, 55 and 55A MP 54 and oil pressure controls are used as safety switches to protect refrigeration compressors
More informationThe SAG type flat, rubber-steel, balance ropes
ROPES The SAG type flat, rubber-steel, balance ropes Application of the SAG ropes: The SAG type, flat, rubber-steel balance ropes, further on called the SAG ropes, are used for shaft transport at mines
More informationLimit switches OsiSense XC Special For material handling applications, type XC1 AC
Presentation For material handling applications, type XC C b XC C with slow break contacts v With head for linear movement () 00_ 00_ 000_ Page / 00_ 00_ XCC XCC Page / XCC XCC / General characteristics
More informationC&G 2395 Exam Paper June Section A-All questions carry equal marks. Answer all three questions. Show all calculations.
C&G 2395 Exam Paper June 2013 Section A-All questions carry equal marks. Answer all three questions. Show all calculations. 1. The electrical installation in an industrial unit is scheduled for a periodic
More informationTightness controls TC 1 3 and TC 4
Tightness controls TC 1 3 and TC 4 Test of both safety valves Short test period thanks to logical decision-making in the program sequence Adjustable test period which can be adapted to different systems
More informationPart 7 Fleet in service Chapter 2 Inclining test and light weight check
RULES FOR CLASSIFICATION Inland navigation vessels Edition December 2015 Part 7 Fleet in service Chapter 2 Inclining test and light weight check The content of this service document is the subject of intellectual
More informationPressure controls, differential pressure controls type RT
Data sheet Pressure controls, differential pressure controls type RT Introduction Features An RT pressure control contains a pressure operated single-pole changeover contact, the position of which depends
More informationElectropneumatic Positioner and Pneumatic Positioner Type 3760 JIS
Electropneumatic Positioner and Pneumatic Positioner Type 3760 Application Single-acting positioners for direct attachment to pneumatic control valves. An electric standardized signal of 4 to 20 ma or
More informationBSI BSI 5200 THE NEW CAST 60 FITTINGS AN EASY ASSEMBLY A KNOWN PRODUCT, SAFE AND RELIABLE AVAILABLE IN CARBON AND STAINLESS STEEL
THE NEW CAST 60 FITTINGS AN EASY ASSEMBLY A KNOWN PRODUCT, SAFE AND RELIABLE AVAILABLE IN CARBON AND STAINLESS STEEL 55 THEORY OF OPERATION The CAST S.p.A. fitting according to the norms, is a mechanical
More informationDifferential Pressure Control Types MP 54, MP 55 and MP 55A
MAKING MODERN LIVING POSSIBLE Data sheet Differential Pressure Control Types MP 54, MP 55 and MP 55A MP 54 and MP 55 oil differential pressure controls are used as safety switches to protect refrigeration
More informationPressure switch KP-E. Data sheet
Data sheet Pressure switch KP-E KP-E pressure switches for use in refrigeration and air conditioning systems are equipped with SPDT gold plated contacts and stainless steel bellows. The high pressure switches
More informationProcess Filtration From Pure to Sterile
From Pure to Sterile MAIN FEATURES & BENEFITS: Developed for the sterile filtration of air and gases in compressed gas applications as well as venting applications. High dirt holding capacity at a low
More information$ Plan Review Fee when Permit Application is submitted HOT TUBS AND SPAS BUILDING PERMIT APPLICATION. COST: $80.
Community Development 1050 W Romeo Rd, Romeoville, IL 60446-1530 (815) 886-7200 Fax #: (815) 886-2724 Email: buildinginspections@romeoville.org HOT TUBS AND SPAS BUILDING PERMIT APPLICATION Application
More informationSITRANS P measuring instruments for pressure
SITRANS P measuring instruments for pressure Z series for gage pressure Siemens AG 008 Overview Design The main components of the pressure transmitter are: Brass housing with silicon measuring cell and
More informationTERMINAL BLOCK SUMMARY
TERMINAL BLOCK SUMMARY TERMINAL BLOCK SUMMARY TERMINAL BLOCK SUMMARY FEEDTHROUGH TERMINALS FUSE TERMINALS DISCONNECT TERMINALS MICRO TERMINALS CIRCUIT BREAKERS PRODUCT INFORMATION Feedthrough Terminals
More informationMobarakeh Steel Company (MSC) Can Iranian slabs & HRC support SE Asian steel industries?
(MSC) Can Iranian slabs & HRC support SE Asian steel industries? JAKARTA June 2018 Iranian slab, an opportunity for SE Asia flat producers Overview of global slab trade Slab trade in SE Asia (MSC) An overview
More informationService Calibration are you doing it properly?
ABB MEASUREMENT & ANALYTICS ARTICLE Service Calibration are you doing it properly? A variety of factors, including wear and tear and non-ideal installation conditions, can cause the performance of an instrument
More informationJunction Boxes Series 8118
> Enclosure in glass fibre reinforced polyester resin > 3 different sizes available with 4, 5 or as a junction box with integrated miniature fuse: 3 terminals and 1 miniature fuse 7 terminals and 1 miniature
More informationPart 4 Machinery and systems Chapter 6 Piping systems, pumps and compressors
RULES FOR CLASSIFICATION Underwater technology Edition December 2015 Part 4 Machinery and systems Chapter 6 Piping systems, pumps and compressors The content of this service document is the subject of
More informationCertificate of compliance
Bureau Veritas Consumer Products Services Germany GmbH Businesspark A96 86842 Türkheim Germany + 49 (0) 40 740 41 0 cps-tuerkheim@de.bureauveritas.com Certification body of BV CPS GmbH Accredited according
More informationECP Series Explosionproof Enclosures for OEM Applications. Optimized design, extensive sizes, and fast lead times.
ECP Series Explosionproof Enclosures for OEM Applications Optimized design, extensive sizes, and fast lead times. ECP Series Explosionproof Enclosures, the latest addition to our portfolio of electrical
More informationGas plug-in hose, straight-through form. Instructions for Use. suitable for gas socket model G2019T, G2016T. G2023 from 01/1990.
Gas plug-in hose, straight-through form Instructions for Use suitable for gas socket model G2019T, G2016T Model Year built: G2023 from 01/1990 en_int Gas plug-in hose, straight-through form 2 from 12 Table
More informationFULL STAINLESS STEEL EXPLOSION-PROOF SOLUTIONS OIL & GAS I OFFSHORE AND ONSHORE
FULL STAINLESS STEEL EXPLOSION-PROOF SOLUTIONS OIL & GAS I OFFSHORE AND ONSHORE ASCO Numatics ASCO Numatics is the world leader in design, manufacturer of solenoid valves and accessories for both offshore
More informationOperating instructions Safety Rope Emergency Stop Switches ZB0052 / ZB0053 ZB0072 / ZB0073
Operating instructions Safety Rope Emergency Stop Switches UK ZB0052 / ZB0053 ZB0072 / ZB0073 7390878 / 02 03 / 2011 Contents 1 Safety instructions...3 2 Installation / set-up...4 2.1 Applications...4
More informationSingle-Phase Pad-Mounted Distribution. Single-Phase Pad-Mounted Distribution Transformers KVA
62-10 Single-Phase Pad-Mounted Distribution Catolog Transformers Section Howard Industries, Inc. Certifi ed to ISO 9001:2015 62-10 Single-Phase Pad-Mounted Distribution Transformers 5-500 KVA 10002179
More informationCALIBRATION SERVICES HUMIDITY DEW POINT AIR VELOCITY MASS FLOW TEMPERATURE CO 2 PRESSURE. (+34)
CALIBRATION SERVICES HUMIDITY DEW POINT AIR VELOCITY MASS FLOW TEMPERATURE CO 2 PRESSURE (+34) 968 162 005 www.sensovant.com comercial@sensovant.com www.epluse.com CALIBRATION AT THE HIGHEST LEVEL The
More informationCertificate of Compliance
Certificate of Compliance Certificate: 2419437 Master Contract: 203012 Issued to: ABB Automation Products GmbH 72 Schillerstrasse Minden, 32425 Germany Attention: Ralf Schaffer The products listed below
More informationCertificate of conformity Power generation unit PIKO 1.5 MP, 2.0 MP, 2.5 MP, 3.0 MP, 3.6 MP, 4.2 MP
Certificate of conformity Power generation unit Manufacturer KOSTAL Solar Electric GmbH Hanferstraße 6 79108 Freiburg i. Br., Deutschland Inverter PIKO 1.5 MP, 2.0 MP, 2.5 MP, 3.0 MP, 3.6 MP, 4.2 MP Assessment
More informationWing Union/Hammer Union Pressure Sensors. Datasheet. Models 435/437
Wing Union/Hammer Union Pressure Sensors Models 435/437 0 psi to 5000 psi; 0 psi to 6000 psi; 0 psi to 10000 psi; 0 psi to 15000 psi; 0 psi to 20000 psi; 0 bar to 350 bar; 0 bar to 400 bar; 0 bar to 700
More informationSolenoid gas valve. The solenoid gas valve is also applicable as a main gas valve Pilot gas valve for forced draft burners
7 634 VGS1... with AGA67 connector VGS2... with AGA67 connector Solenoid gas valve VGS The solenoid gas valve is also applicable as a main gas valve Pilot gas valve for forced draft burners The VGS and
More informationFlexible hoses - Non-metallic materials
CLASS PROGRAMME Type approval DNVGL-CP-0183 Edition December 2015 The electronic pdf version of this document, available free of charge from http://www.dnvgl.com, is the officially binding version. FOREWORD
More informationFloodlight LED. Series Operating instructions EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN
Floodlight LED Operating instructions Additional languages www.stahl-ex.com General Information Contents 1 General Information...2 1.1 Manufacturer...2 1.2 Information regarding the operating instructions...3
More informationSILENT CLASS NOTATION
RULES FOR CLASSIFICATION OF SHIPS NEWBUILDINGS SPECIAL EQUIPMENT AND SYSTEMS ADDITIONAL CLASS PART 6 CHAPTER 24 SILENT CLASS NOTATION JANUARY 2010 CONTENTS PAGE Sec. 1 General Requirements... 5 Sec. 2
More informationType MMV Medium Power Cable
7-05 Type MMV Medium Power Cable Single Conductor: 5kV 5kV, 00% & % Insulation Levels. Rated 90 C Multi-Conductor: 5kV 5kV, 00% & % Insulation Levels. Rated 90 C Conductors Soft annealed flexible stranded
More informationCRICKET AUSTRALIA. Schedule for the Junior Formats Survey and Feedback Incentivisation Promotion
CRICKET AUSTRALIA Schedule for the Junior Formats Survey and Feedback Incentivisation Promotion Promotion Name Junior Formats Survey and Feedback Incentivisation Promotion Promoter ABN 53 006 089 130 of
More informationPressure Measurement Single-range transmitters for general applications
Siemens AG 206 Overview Design Device structure without explosion protection The pressure transmitter consists of a piezoresistive measuring cell with a diaphragm installed in a stainless steel enclosure.
More informationData sheet. Pressure switches and thermostats Type KPS 10/2003 DKACT.PD.P10.E B0782
Data sheet Pressure switches and thermostats Type KPS 10/2003 DKACT.PD.P10.E2.02 520B0782 Survey Type KPS pressure switches 1. Standard pressure switches Range Further -1 0 10 20 30 40 50 60 bar P e Type
More informationCertificate of Conformity
Certificate Holder: ABB Automation Products GmbH Schillerstrasse 72 D-32425 Minden GERMANY Electrical Apparatus: Type of Protection: 2600T Pressure Transmitter Models 265../267../269.. Communication protocols:
More informationReg No: 1999/027771/07 ACCREDITED AND APPROVED TEST LABORATORY IN TERMS OF ARP 0108: REGULATORY REQUIREMENTS FOR EXPLOSION PROTECTED APPARATUS
Government Approved Test Laboratory (Previously AIA) Reg No: 1999/027771/07 ACCREDITED AND APPROVED TEST LABORATORY IN TERMS OF ARP 0108: REGULATORY REQUIREMENTS FOR EXPLOSION PROTECTED APPARATUS ZEST
More informationCompact pressure switches for gas and air
Compact pressure es for gas and air / 5.0 Printed in Germany Edition 0.8 Nr. 9 544 6 Technical description The pressure is an adjustable compact pressure according to EN 854 for combustion plants. The
More informationMonitoring device NTS 30
P R O D U C T I N F O R M A T I O N Electronic level- and temperature monitoring device Monitoring device NTS 30 Contents Description Description... 2 Operating... 3 Design and electrical data... 4 Circuit
More information9700 Transmitter Submersible hydrostatic level transmitter
Specification sheet IP0078 October 2007 Level 9700 Transmitter Submersible hydrostatic level transmitter Description The 9700 series hydrostatic level transmitter is designed to perform in the most arduous
More informationY-Pattern Strainer Valves Range
Y-Pattern Strainer Valves Range Conex Bänninger Y-Pattern Strainer Valves During installation and subsequent operation, debris and scale flowing through the system can cause considerable damage to pipeline
More informationPrewired position switches FA series
2 Prewired position switches FA series Selection diagram 01 08 10 11 1 15 1 02 external rubber gasket external rubber gasket 1 51 52 54 55 56 5 ACTUATORS adjustable lever safety adjustable lever 41 45
More informationCAST IRON SAFETY VALVE TYPE 6301
CHARACTERISTICS The 6301 safety valve is dedicated to protect the equipment from potential overpressure. This is an automatic device that closes when the pressure conditions are back to normal. It is a
More informationREFERENCE SPECIFICATION FOR END
TITLE SPECIFICATION FOR END CONNECTORS AND INSULATING DATE: DECEMBER 2003 SLEEVES PAGE: 1 OF 18 TABLE OF CONTENTS Page FOREWORD... 2 INTRODUCTION... 3 1 SCOPE... 3 2 CONSTRUCTIONAL REQUIREMENTS... 3 2.1
More informationDK46 - DK800 Supplementary instructions
DK46 - DK800 Supplementary instructions Variable area flowmeter Device category II2G with electrical internals Additional Ex manual KROHNE CONTENTS DK46 - DK800 1 Safety instructions 3 1.1 General... 3
More informationPressure switch and Thermostat CAS
Data sheet Pressure switch and Thermostat CAS The CAS Series consists of a series of pressure controlled switches and temperature controlled switches. In this series, special attention has been given to
More informationIECEx Certificate of Conformity Annexe
for Certificate No.: IECEx TSA 09.004X Issue No.: 1 Equipment description pertaining to Issue 0 of this Certificate: A range of electrical power distribution, control, protection and monitoring equipment
More informationPressure switch and Thermostat KPS
Data sheet Pressure switch and Thermostat KPS The KPS Series consists of a series of pressure and temperature controlled switches. In this series, special attention has been given to meeting demands for
More informationUL TEST REPORT AND PROCEDURE
Issue Date: 2015-01-30 Page 1 of 24 Report Reference # E186249-A270-UL UL TEST REPORT AND PROCEDURE Standard: Certification Type: CCN: Product: Model: Rating: UL 60950-1, 2nd Edition, 2014-10-14 (Information
More informationRelative pressure switch type 521
Relative pressure switch type 521 Pressure range 0... 2.5 600 bar The compact type 521 pressure switch is based upon the Huba Control developed thick film technology where the pressure measuring cell is
More informationibridge and ibridge Ultra
2.00 mm Board to Cable Connectors ED. 06 10.2016 Catalog EA IB001 erni.com erni.cn TABLE OF CONTENTS OVERVIEW General 03 Technical Details 04 Features 05 Electrical and Mechanical Characteristics 10 Ordering
More informationIA CERTIFICATE (Annual review required by MASC covered by an additional letter) (Revision 2- Review & Review)
Certificate Number: MASC MS/11-127X Issue: 09 October 2017 Expire: 09 October 2020 Page: 1 of 5 IA CERTIFICATE (Annual review required by MASC covered by an additional letter) (Revision 2- Review & Review)
More informationTechnical information
Technical information 1.1 Design Elektror medium pressure blowers of the RD range are radial ventilators with double-wall impellers made from sheet aluminium respectively from sheet steel. They are directly
More informationC I R E D 18 th International Conference on Electricity Distribution Turin, 6 th to 9 th June 2005
RELIABILITY AND LONG TIME BEHAVIOUR OF MV-DISTRIBUTION SWITCHGEAR IN SEVERE ENVIRONMENTAL CONDITIONS - EXAMINATION OF SF 6 -INSULATED RING MAIN UNITS (RMU) UP TO 20 YEARS IN SERVICE. B. I. Oftedal, Siemens
More informationX2 Metallized Polypropylene Film Capacitor JFV
FEATURES: Non-inductive, (UL940V-0) plastic case sealed with epoxy resin. Provides interference suppression with VDE, ENEC and UL approvals. SPECIFICATIONS: Operating Temperature -40 ~ +110 Voltage Rating
More informationHUMOR 20. High Accuracy Humidity Calibrator. Water T, p1 HUMOR 20 V1.0
High Accuracy Humidity Calibrator The role of humidity calibrations that are accurate, reproducible, and documentable is becoming more and more important. ISO quality guidelines and regulations according
More informationOperating Instructions
Operating Instructions Ex d Enclosures in Light Metal / Flameproof Encapsulation > 8265/0 Empty Enclosure > 8265/4 controller, installed in Ex e enclosure > 8265/5 controller Contents 1 Contents 1 Contents...2
More informationDynamic Positioning Systems
RULES FOR CLASSIFICATION OF Ships PART 6 CHAPTER 7 NEWBUILDINGS SPECIAL EQUIPMENT AND SYSTEMS ADDITIONAL CLASS Dynamic Positioning Systems JULY 2014 The electronic pdf version of this document found through
More information