02 Push-to-Close Latch

Transcription

1 Push-to-lose Latch ousing: Polypropylene, black or white Pole pieces and mounting : Steel, zinc plated Magnet:, large: Barium ferrite : Strontium ferrite 7.7 (.30) 13.3 (.52) 6.1 (.24) 23.6 (.93) 22 (.7) (.30) (.36) (1.0) 39.7 (1.56) 37. (1.49) 300 series series series Double 00 series N (1. lbf) 46 N (10 lbf) 64 N (14 lbf) 105 N (23 lbf) 2.1 N (.47 lbf) 5.9 N (1.3 lbf) 7.3 N (1.6 lbf) 1 N (1.0 lbf) -30º (-20ºF) to 115º (240ºF) Flammability rating UL94-B backed strikes are available. Order separately. See page 146. supplied as a general guide only. 11 (.43) 20.6 (.1) 9.4 (.37) (.05) double 5.5 (2.30) 57 (2.24) double 22 (.6) (.05) 20.6 (.1) 2 (.2) Thickness 65 (2.56) 5.5 (2.30) 57 (2.24) Magnet Min. Max. Black White 27.9 (1.10) 0.9 (.035) 0.5 (.020) 2 (.00) (1.05) 2.4 (.095) 2 (.00) 3.6 (.140) (1.5) 1 (.040) 0.5 (.020) 2 (.00) () 2.5 (.) 2 (.00) 3.6 (.140) (1.79) 4 (.160) 3.6 (.140) 5.1 (.) (2.57) 0.3 (.010) 0.5 (.020) 2 (.00) (2.54) 1. (.070) 2 (.00) 3.6 (.140) (2.49) 3.3 (.130) 3.6 (.140) 5.1 (.) ~ 0.3 (.010) 0.5 (.020) 2 (.00) ~ ~ 1. (.070) 2 (.00) 3.6 (.140) ~ ~ 3.3 (.130) 3.6 (.140) 5.1 (.) ~

2 Punch rectangular slot R max. 0.4 (.015) 2. Snap catch into slot W L L ±0.1 (.005) W ±0.1 (.005) 22.2 (.75) 6.4 (.25) 3.1 (1.50).1 (.32) 57.1 (2.25) 9.6 (.3) Double 57.1 (2.25) 21 (.2) Mounting Bracket For applications where frame is not suitable for punching (order separately) T B D (measured from inside surface of door or strike) A E Attach with two No. 4, No. 5 or M3 screws A B D E ±0.1 (±.005) T For Use with these Magnets ONLY Bracket 41.3 (1.63) 11.1 (.44) 13.5 (.53) 7.9±2.4 (.31±.09) 35 (1.3) (.50) 24.6 (.97) 17.5±3.2 (.69±.13) 44.5 (1.75) 1 (.042) (3.00) 14.3 (.56) 1.7 (.73) 12.7±3.2 (.50±.13) 70 (2.75) double 76 (3.00) (1.00) 1.7 (.73) 12.7±3.2 (.50±.13) 70 (2.75) 1.6 (.062)

3 Push-to-lose Latch Series F Ø 14.2 (.55) Series F Ø 22.1 (.70) ousing: Polypropylene, black Pole pieces: Steel, zinc plated Magnet: Barium ferrite 400 series 600 series 14 N (3.1 lbf) 49 N (11 lbf) 2.2 N (.49 lbf) 6.4 N (1.4 lbf) -30º (-20ºF) to 115º (240ºF) Flammability rating: UL94-B backed strikes are available. Order separately. See page 146. Ø 16 (.63) 21.4 (.4) 1. Drill or punch hole Ø (.563 ) (.03) (.04) Ø 24.5 (.97) 33.5 (1.32) Ø (.75 ) (.03) 2. Snap catch into hole supplied as a general guide only F Thickness Min. Max. Magnet (.030) 0.5 (.020) 2 (.00) (.090) 2 (.00) 3.5 (.140) (.150) 3.5 (.140) 5 (.) (.020) 0.5 (.020) 2 (.00) (.00) 2 (.00) 3.5 (.140) (.140) 3.5 (.140) 5 (.)

4 02 Push-to-lose Latch 145 Series 5.6 (.22) (1.00) ontact plane of tape Adhesive installation ousing: Polypropylene, black Pole pieces: Steel, zinc plated Magnet: Barium ferrite Series 1.6 (.06) 31. (5) 44.5 (1.75).7 (.34) ontact plane of Series 46 N (10 lbf) 5.9 N (1.3 lbf) tape N (14 lbf) N (1. lbf) 7.3 N (1.6 lbf) 2.1 N (.47 lbf) Series (.05) 14 (.55) 2.6 (1.13) 5 1. Remove protective paper ontact plane of Pressure-sensitive tape 10.7 ATUAL (.42) SIZE Series Magnet Place in position -30º (-20ºF) to 115º (240ºF) Flammability rating: UL94-B backed strikes are available. Order separately. See page 146. supplied as a general guide only : Be sure the mounting surface is clean and capable of retaining a satisfactory adhesive bond

5 Push-to-lose Latch Steel strikes Ferrous keepers for catch Self-adhesive or screw mount Steel, zinc plated Adhesive: Neoprene foam with acrylic Be sure the mounting surface is clean and capable of retaining a satisfactory adhesive bond. Self-adhesive mounted strikes are designed to function under intermittent break-away loads. Use screw-mounted strikes for continuous load applications. Self-adhesive Y adhesive Z For Use with Series atch Strike Part Number Y Z 1. Position strike on installed catch 2. Remove protective paper. lose door or panel onto strike (.94) 32 (5) 51 2 (.0) 2.4 (.094) 2.4 (.094) Screw-Mounted Install with M3 or No. 5 flat head screw For Use With Series atch Strike Part Number Locating prongs (5) (.) 2 (.0)