Generic Electrical Safety for Non-Qualified Workers
|
|
|
- Annabelle Cole
- 5 years ago
- Views:
Transcription
1 Generic Electrical Safety for Non-Qualified Workers National Academy for Nuclear Training elearning System (NANTeL) July 2010 Page 1 of 45
2 Revision History Course Title: Generic Electrical Safety for Non-Qualified Workers Course Owner: Jim Caulk Revision History Revision Date Version Number Purpose for Revision Performed by 09/28/ Initial Implementation Bob Wood 12/19/ Update to NANTeL template Jim Caulk 3/24/09 NA Re-cropped photo on p.38 Jim Caulk 10/23/ Changed wording for Objective D Deleted objective on protective equipment and tools Deleted screens on Calculating MSD; Clothing and Apparel; PPE; and Safety Signs/Barriers because they relate to qualified workers. Removed detail about GFCI fault detection Other minor wording changes throughout 2/17/ Fixed typo on page 9, Injuries from Shock 7/2/ Page 7: added voltage Page 8: added paragraph and corrected chart numbers Jim Caulk Jim Caulk Jim Caulk Page 2 of 45
3 Page 31: Added description of what a GFCI does. 7/2/ Page 38: Modified review question Jim Caulk Page 3 of 45
4 Generic Electrical Safety for Non-Qualified Workers Course objectives: Terminal Objective: Upon completion of this training, students will be able to recognize electrical safety hazards that may be encountered by non-qualified workers and the actions to be followed to minimize these hazards. Enabling Objectives: A. Describe the hazards of working around or with electrical equipment. B. Describe the types of equipment at a power plant that may pose electrical safety hazards. C. Describe the response for an electrical shock injury. D. State the purpose for the minimum safe distance for working around energized electrical equipment, including overhead and underground lines. E. State the employee's responsibilities and safe work practices when performing work involving electrical hazards. F. Describe alerting techniques used to warn and protect employees from electrical hazards, including: 1. Safety signs and tags 2. Barricades 3. Attendants Target Audience: This course is intended as information that will assist unqualified electrical workers when working around electrical equipment typically found at nuclear power plants. This course does not qualify workers to work with energized electrical equipment. It is the responsibility of the individual to follow all station procedures, policies, and programs for working around electrical components and when using electrical equipment. If students have questions about site-specific electrical procedures or requirements they should contact their supervisor or the site industrial safety department. Developmental Resource: 1) 29CFR Electrical Safety Reviewers: AEP, Tom Kanger Dominion, Alan Bassham Southern Nuclear, Tony Prestifilippo INPO, Terry Maund INPO, Ramon Martinez Page 4 of 45
5 Slide 1 Page 5 of 45
6 Slide 2 Page 6 of 45
7 Slide 3 Page 7 of 45
8 Slide 4 Page 8 of 45
9 Slide 5 Page 9 of 45
10 Slide 6 Page 10 of 45
11 Slide 7 Page 11 of 45
12 Slide 8 Page 12 of 45
13 Slide 9 Page 13 of 45
14 Slide 10 Page 14 of 45
15 Slide 11 Page 15 of 45
16 Slide 12 Page 16 of 45
17 Slide 13 Page 17 of 45
18 Slide 14 Page 18 of 45
19 Slide 15 Page 19 of 45
20 Slide 16 Page 20 of 45
21 Slide 17 Page 21 of 45
22 Slide 18 Page 22 of 45
23 Slide 19 Page 23 of 45
24 Slide 20 Page 24 of 45
25 Slide 21 Page 25 of 45
26 Slide 22 Page 26 of 45
27 Slide 23 Page 27 of 45
28 Slide 24 Page 28 of 45
29 Slide 25 Page 29 of 45
30 Slide 26 Page 30 of 45
31 Slide 27 Page 31 of 45
32 Slide 28 Page 32 of 45
33 Slide 29 Page 33 of 45
34 Slide 30 Page 34 of 45
35 Slide 31 Page 35 of 45
36 Slide 32 Page 36 of 45
37 Slide 33 Page 37 of 45
38 Slide 34 Page 38 of 45
39 Slide 35 Page 39 of 45
40 Slide 36 Page 40 of 45
41 Slide 37 Page 41 of 45
42 Slide 38 Page 42 of 45
43 Slide 39 Page 43 of 45
44 Slide 41 Page 44 of 45
45 Slide 42 Page 45 of 45
Generic Fall Protection
Generic Fall Protection National Academy for Nuclear Training elearning System (NANTeL) May 2010 Page 1 of 71 Revision History Course Title: Generic Fall Protection Course Owner: Bob Wood Revision History
Electrical Safety PPT-SM-ELECTSFTY V.A.0.0
Electrical Safety 1 Electrical Safety OSHA s electrical safety standard covers Work on or near exposed energized equipment Proper use of electrical protective equipment Safe use of portable electric equipment
Electrical Safety. Unqualified Worker
Electrical Safety Unqualified Worker Session Objectives Understand the hazards of electricity Identify and avoid common electrical hazards Follow safe work practices around electrical equipment How Does
Electrical Safety Work Practices
Work Practices I. SCOPE This program covers any SOUTHWESTERN COMMUNITY COLLEGE employee that may work or be exposed to exposed electrical systems: To assure that employees are not exposed to potentially
ELECTRICAL SAFETY. Unsafe work practices near electricity can kill you! You are responsible for protecting yourself from electrical shock.
ELECTRICAL SAFETY Unsafe work practices near electricity can kill you! Electricity can cause: a mild shock, a severe shock, or even a deadly shock You are responsible for protecting yourself from electrical
This training session covers electrical safety for unqualified persons. Unqualified persons are machine operators, operators of powered industrial
This training session covers electrical safety for unqualified persons. Unqualified persons are machine operators, operators of powered industrial trucks, construction workers, and others who are not qualified
ELECTRICAL (COMPREHENSIVE) SAFETY PROGRAM REGULATORY STANDARD: OSHA - 29 CFR CFR , ,
ELECTRICAL (COMPREHENSIVE) SAFETY PROGRAM REGULATORY STANDARD: OSHA - 29 CFR 1910.331 335-29 CFR 1926.302, 1926.416, 1926.417 BASIS: The National Safety Council estimates that there are at least 300 deaths
Permit-Required Confined Spaces...29CFR
(Compliance Audit) Section (c) General Requirements 1) Has the employer performed a workplace inspection to determine if there are Yes No NA permit-required confined spaces (PRCS) present? 2) If the workplace
2018 NFPA 70E Electrical Safe work practices
This course provides a thorough knowledge of the dangers and recommended safe behaviors for those who work daily around electrical hazards. This course goes into examples of real life application to give
Presenter s Notes. Before darkening the room, offer a welcome and overview. Begin by introducing the program and its topic:
Before darkening the room, offer a welcome and overview. Begin by introducing the program and its topic: Today s session focuses on working safely around overhead and underground electric power lines and
Electrical. Version 1.0
This document is intended to provide basic safety guidelines for the Physical Plant Department at Community College of Allegheny County. The information provided in this guide may vary by site. Version
Safe Work Method Statement
TE CONTROLLED COPY OF TIS DOCUMENT IS ON TE COMPUTER NETWORK PRINTED COPIES ARE ONLY CURRENT FOR TE DATE AT TE BOTTOM OF TE PAGE. Title Working at eight SWMS No. 16 Authorized and email Signed by the (Managing
SWMS No 012 Samark North Qld Pty Ltd ABN : Electrical Contractors License C37121 Page 2 of 6
Samark North Qld Pty Ltd SWMS SWMS No 0 Samark North Qld Pty Ltd ABN : 99 08 98 87 Electrical Contractors License C37 Page of 6 Safe Work Method Statement Title: SWMS:0 INSTALLING LIGHT POLES Work Method
Management Plan for Electrical Safety ISD #535
Management Plan for Electrical Safety ISD #535 Health & Safety Office Maintenance Service Building 10 SE 9 ½ Street Rochester, MN 55904 507-328-4507 MANAGEMENT PLAN FOR ELECTRICAL SAFETY Table of Contents
Definitions found in several locations:
Definitions found in several locations: NFPA 70 - National Electric Code NFPA 70B Recommended Practice for Electrical Equipment Maintenance. NFPA 70E Electrical Safety in the Workplace OSHA 1910 Subpart
11/2/2017. Course Objectives. Overview
Course Objectives The objective of this CBT module is to insure that personnel receive basic training in electrical safety. Every employee's work involves electricity. This may vary from typical electrical
SAFE-WORK PRACTICES Working On Or Near Energized Electrical Equipment CAT A-1 SOP #4
SUNCOR ENERGY PRODUCTS DISTRIBUTION TERMINAL OPERATING MANUAL STANDARD OPERATING PROCEDURE SAFE-WORK PRACTICES Working On Or Near Energized Electrical Equipment Lifesaving Rules Supporting Document Verify
Electrical Safety Program
Electrical Safety Program The University Of Iowa Environmental Health & Safety 122 Grand Avenue Court Iowa City, IA 52242-1000 Phone: 319-335-8501 Date Revised/Reviewed: 6/8/2018 Table of Contents 1. Summary...
Safe Work Method Statement
Title Skid Steer Operation (Bobcat) SWMS No. 14 Authorized and email Signed by the (Managing Director / CEO / Partner / Proprietor) on Date 01/08 /2016 Safe Work Procedure for the Work:- Yes No Employees
UNIVERSITY OF NOTRE DAME CONFINED SPACE ENTRY POLICY
UNIVERSITY OF NOTRE DAME CONFINED SPACE ENTRY POLICY Revised: February 2004 TABLE OF CONTENTS I. Introduction.. -4- II. Definition of a Confined Space -4- III. Responsibilities -5- A. University of Notre
Major Changes. Standard. TECH TOPIC standards and. By Peter Walsh, PE
Major Changes to NFPA 70E Standard 2015 Edition TECH TOPIC standards and codes note 5 By Peter Walsh, PE Industrial Solutions Engineer Introduction NFPA 70E, Standard for Electrical Safety in the Workplace,
Leader s Guide ERI Safety Videos
1717 SAFE ELECTRICAL WORK PRACTICES & THE 2018 NFPA 70E Leader s Guide ERI Safety Videos SAFE ELECTRICAL WORK PRACTICES & THE 2018 NFPA 70E This easy-to-use Leader s Guide is provided to assist in conducting
Electric and Natural Gas Safety Slide Show Presenter s Notes
Contractor Beware Electric and Natural Gas Safety Slide Show Presenter s Notes Slide 1 Before darkening the room, offer a welcome and overview. Begin by introducing the program and its topic: Today s training
Hazardous Materials Management. Presented by. James E. Roughton, MS, CSP, CRSP, CHMM.
Hazardous Materials Management Presented by. James E. Roughton, MS, CSP, CRSP, CHMM. Hazardous Waste Operations And Emergency Response (HAZWOPER) 29 CFR 1910.120 Scope Clean-up Operations At Uncontrolled
CONFINED SPACES. Procedures for Permit-required ALTERNATIVE TO A FULL PERMIT ENTRY. Written Programs
THEME nº17: RESPONSIBLE: Confined Spaces (OSHA) Werson Monteiro ALTERNATIVE TO A FULL PERMIT ENTRY Under certain conditions described in the stard, the employer may use alternate procedures for worker
Scope: This plan applies to all personnel, including contractors, who enter or work in confined spaces, or supervise such activities.
11/13/1995 4 5/20/2013 1 of 10 Authority and Scope Regulation: 29 CFR 1910.146 Scope: This plan applies to all personnel, including contractors, who enter or work in confined spaces, or supervise such
Workers Compensation Accident Investigations
Workers Compensation Accident Investigations Accident Investigation Procedures An accident investigation will be performed by the supervisor at the location where the accident occurred. The safety coordinator
Electrical. OSHA Office of Training and Education 1
Electrical OSHA Office of Training and Education 1 Introduction An average of one worker is electrocuted on the job every day There are four main types of electrical injuries: Electrocution (death due
SH&E Work Method Statement Concrete Cutting & Drilling Fast Cut Qld Pty Ltd, 91 Basalt, GEEBUNG PH M ABN
SH&E Work Method Statement Concrete Cutting & Drilling Fast Cut Qld Pty Ltd, 91 Basalt, GEEBUNG PH 07 3265 6537 M 0411 756 719 ABN 45 081 359 613 OHS-FRM-100 Rev 11 (07/18) Page 1 SH&EWMS No.: F-C-QLD-30
PERMIT-REQUIRED CONFINED SPACES PROGRAM
PERMIT-REQUIRED CONFINED SPACES PROGRAM On January 14, 1993, OSHA established safety requirements to protect employees from the hazards of entry into permit-required confined spaces. It is essential to
SPECIALIZED ONLINE TRAINING COURSE LIST
SPECIALIZED ONLINE TRAINING COURSE LIST Grainger Online Safety Manager provides you with access to online training courses covering today's most relevant safety topics. The training content is designed
Electrical Safety. Introduction
Electrical Safety 1 Introduction There are four main types of electrical injuries: Electrocution (death due to electrical shock) Electrical shock Burns Falls Around 300 workers were electrocuted in 2008
Hazardous Energy Control (Lockout-Tagout)
Hazardous Energy Control (Lockout-Tagout) The purpose of this program is to prevent inadvertent operation or energization of machines, equipment, or processes in order to protect employees and establish
CONFINED SPACE WRITTEN PROGRAM
CONFINED SPACE WRITTEN PROGRAM Maple River Public Schools ISD#2135 Confined Space Entry Plan (Permit Required) Maple River Public School Plan last updated: October, 2014 Authority and Scope Regulation:
Fall Protection. 29 CFR Appendix C 29 CFR 1926 Subpart M
Fall Protection 29 CFR 1910.66 Appendix C 29 CFR 1926 Subpart M Duty to Have Fall Protection Provide fall protection systems which meet the criteria of 1926 and 1910 Make fall protection an integral part
Safe Work Method Statement
TE CONTROLLED COPY OF TIS DOCUMENT IS ON TE COMPUTER NETWORK PRINTED COPIES ARE ONLY CURRENT FOR TE DATE AT TE BOTTOM OF TE PAGE. Title Dogging of Crane General Loading and Unloading SWMS No. 20 Authorized
RISK ENGINEERING TECHNICAL GUIDE
Introduction Many workspaces contain spaces that are considered to be "confined", because their configurations hinders the activities of any employee who must enter into, work in, and exit from them. In
Lock Out - Tag Out Safety Program
Lock Out - Tag Out Safety Program Daniel Schmid 4-22-15 Pam Schmid 4-22-15 Dan Schmid Pam Schmid Safety Director Quality Director Table of Contents DOCUMENT REVISION TABLE... 3 PURPOSE... 4 RESPONSIBILITY...
APPENDIX A. Appendix A: Fall Hazards Lesson Test Instructor Copy (answers bold/italic), Student copy to distribute follows
APPENDIX A Appendix A: Fall Hazards Lesson Test Instructor Copy (answers bold/italic), Student copy to distribute follows 1. In general, fall protection must be provided to construction workers who are
Safety Meeting Topic #6 Working Around /On Energized Equipment
Safety Meeting Topic #6 Working Around /On Energized Equipment Employees shall become familiar with the following general guidelines: 1. Only qualified personnel shall work on electrical equipment, systems,
LOCK-OUT/TAG-OUT (LO/TO) SAFETY PROGRAM
LOCK-OUT/TAG-OUT (LO/TO) SAFETY PROGRAM REGULATORY STANDARD: OSHA - 29 CFR 1910.147 BASIS: Approximately three million workers in the United States face risks from uncontrolled energy when servicing machinery
D Square Construction LLC
D Square Construction LLC Lock Out-Tag Out (LOTO) and Zero Voltage Verification (ZVV) Process and Plan Energized Work Process and Permit - 1 - Table of Contents 1) Instruction for using Decision Tree Analysis
Original Date of Issue: 04/09
POLICIES AND PROCEDURES DEPARTMENT: Environmental Health and Safety SUBJECT: Electrical Safety Program Original Date of Issue: 04/09 Reviewed 12/2011 Revised 12/2011 BACKGROUND ELECTRIC SHOCK It is well
SAFETY DIRECTIVE. 2.0 DEPARTMENTS AFFECTED This directive applies to all departments and employees of the Town of Marana.
SAFETY DIRECTIVE Title: Safety Signs and Accident Prevention Tags Issuing Department: Town Manager s Safety Office Effective Date: September 1, 2014 Approved: Gilbert Davidson, Town Manager Type of Action:
JOB SAFETY ANALYSIS. How to use the Risk Assessment Charts. Likelihood A (Almost Certain) B (Likely) C (Possible)
Page 1 of 6 How to use the Assessment Charts 1. Determine the Likelihood on the Qualitative Assessment Process Chart (pick a letter applicable to the task). 2. Determine the Consequence on the Qualitative
Safety Essentials. Mandatory rules for our high risk activities
Mandatory rules for our high risk activities Remember... Only undertake activities for which you are trained, competent and authorised to do Before you start a job take a step back, think about all the
MISSOURI UNIVERSITY OF SCIENCE & TECHNOLOGY Procedure: 3.6
Procedure This electrical safety procedure structures safety procedures to meet the requirements of the NFPA-70E Standard. The program is designed for qualified employees who occasionally must perform
Recommended Facilitator Notes: (read the following text out-loud to participants while showing this slide)
Slide 1 Confined Space Entry for General Industry These materials have been developed based on applicable federal laws and regulations in place at the time the materials were created. The program is being
CONFINED SPACES IN CONSTRUCTION SUBPART AA
21 st Annual Willis Construction Risk Management Conference CONFINED SPACES IN CONSTRUCTION 1926.1200 SUBPART AA 9/15/15 Jim Goss WHAT S NEW Still Happening! September 2013 Canastota NY WWTP - Worker fatally
Health & Safety Policy and Procedures Manual SECTION 6 ELECTRICAL SAFETY / CONTROL OF HAZARDOUS ENERGY
SECTION 6 ELECTRICAL SAFETY / CONTROL OF HAZARDOUS ENERGY 1. CONTROL OF HAZARDOUS ENERGY POLICY AND PROCEDURES A. OSHA References: 29 CFR 1910.147, 29 CFR 1910.332, 29 CFR 1910.333, 29 CFR 1926.417 B.
Preparer: Owner: Approver: EHS Team Member TES Manager Site Manager
Procedure No.: BMEHS-002.033 Page: 1 of 10 Preparer: Owner: Approver: EHS Team Member TES Manager Site Manager Document Revision Change Table Revision Revision Description Revised Revision Number New By
CITY AND COUNTY OF DENVER CR&CF RISK UNIT Safe Operating Procedure
CITY AND COUNTY OF DENVER CR&CF RISK UNIT 65.4.2 Safe Operating Procedure 1.0 Introduction Safe Operating Procedures (SOPs) shall be developed for complex or ongoing activities that present a risk of serious
Work Health and Safety Management Plan
Work Health and Safety Management Plan Insert Project Title CompanyName Version 1, dd/mm/yyyy Insert Company Logo USE OF TEMPLATE This Work Health and Safety Management Plan (WHSMP) template has been designed
Permit-Required Confined Space Entry Program
Safety & Health Program Permit-Required Confined Space Entry Program General Company Policy 10627 Midwest Industrial Boulevard, St. Louis, MO Phone: 314-785-6425 Fax: 314-785-6426 The purpose of this program
Activity Hazard Analysis (AHA) EM A.13 FIGURE 1-2 CONTRACTOR REQUIRED AHA TRAINING
Activity Hazard Analysis (AHA) EM 385 2008 01.A.13 FIGURE 1-2 CONTRACTOR REQUIRED AHA TRAINING Activity Hazard Analysis (AHA) AHAs: Risk Assessment Tool Defines the Activity or Work to be Performed Identifies
Key Technology, Inc. Confined Space Entry Program. July, 2017
Key Technology, Inc. Confined Space Entry Program July, 2017 Page 1 of 11 Key Technology, Inc. CONFINED SPACE ENTRY PROGRAM OVERVIEW Purpose: The purpose of this program is to ensure the protection of
Arc Flash. Safety 21
Arc Flash Safety 21 Arc Flash Introduction Electrical Hazards Safety Planning De-Energizing Equipment Working Hot Summary Introduction Most people don t think about electricity very much, which is surprising
Confined Space Entry Considerations April 2016
RiskTopics Confined Space Entry Considerations April 2016 This RiskTopic outlines considerations for confined space entry and discusses the OSHA Confined Space Standard for General Industry. Introduction
Doc #: 1000-AD Revision: - PERSONAL PROTECTIVE EQUIPMENT (PPE) SOP. Author(s): T. Lavoie/ M. Saucedo/ J. Dunlop/ Mtn.
Doc #: 1000-AD-015-0008 Revision: - PERSONAL PROTECTIVE EQUIPMENT (PPE) SOP Author(s): T. Lavoie/ M. Saucedo/ J. Dunlop/ Mtn. Supervisor TABLE OF CONTENTS REVISION HISTORY... 3 1.0 INTRODUCTION... 4 2.0
Portland Community College Facilities Management Services ENERGIZED ELECTRICAL WORK PERMIT AND WORK PLAN
Portland Community College Facilities Management Services ENERGIZED ELECTRICAL WORK PERMIT AND WORK PLAN Section 1 - PROJECT INFORMATION Project Work Request No. Building Room/Location Equip. Serial No.
To set forth procedures for the safe entry to confined spaces.
1.0 Policy Systems shall be utilized to ensure the safety of employees who are required to enter confined spaces. Only those MEI, Inc. (Medical Equipment Installation Inc.) employees who have received
HAZARDOUS WASTE OPERATIONS AND EMERGENCY RESPONSE
Page 1 of 10 HAZARDOUS WASTE OPERATIONS AND EMERGENCY RESPONSE 1.0 SCOPE This Performance Assessment Guide for Hazardous Waste Operations and Emergency Response (HAZWOPER) will be used to carry out the
Electrical Safety For Managers Updated For E. ElectricalTrainingPro.com
Electrical Safety For Managers Updated For 2018 70E Daryn Lewellyn daryn@electricaltrainingpro.com ElectricalTrainingPro.com 877.393.9901 1 Fatalities From Exposure To Electricity 1992-334 Bureau of Labor
Electrical Safety Program
Electrical Safety Program For Adopted LC-1005 Rev. 06/16 Page 1 I. Introduction As part of Organization s overall safety and health program, an
(iii) The controlling contractor must apprise the host employer of the information exchanged with the entry entities pursuant to this subparagraph.
(iii) The controlling contractor must apprise the host employer of the information exchanged with the entry entities pursuant to this subparagraph. Note to paragraph 1926.1203(h). Unless a host employer
Health, Safety, Security and Environment
Document owner and change code Document Owner Aaron Perronne Title HSSE Manager Mark X Change Code Description X N/A First Issue A Typographical/Grammatical correction; formatting change; text clarification-no
1 Great Western Painting Inert Space Entry
Great Western Painting 29 CFR 1910.1046, Permit-Required Confined Spaces INERT SPACE ENTRY Per 29 CFR 1926.21(b)(6)(i), Safety Training and Education, all employees required to enter into confined or enclosed
Electrical Safety Program February 2, 2016
Electrical Safety Program February 2, 2016 1. INTRODUCTION 1.1. Purpose Indiana University Environmental Health and Safety (IUEHS) has developed the Electrical Safety Program to protect employees from
NFPA 70E Policies and Best Practices
NFPA 70E Policies and Best Practices Overview o Understand Compliance Requirements o Provide guidelines for a safe work environment o Effectively communicate policies to employees and customers o Express
6. Each mitigation was verified and individually documented
CHESM/MSW Field Verification Instructions: All information in sections A, B and C must be completed. Information in section B related to subcontractors should be obtained from the work crew if possible.
SAFETY DIRECTIVE 2.0 DEPARTMENTS AFFECTED. This Administrative Directive shall apply to all Town of Marana departments and employees.
SAFETY DIRECTIVE Title: Control of Hazardous Energy Lock-out/Tag-out/Try-out Issuing Department: Town Manager s Safety Office Effective Date: July 1, 2014 Approved: Gilbert Davidson, Town Manager Type
WORK METHOD STATEMENT ELECTRICAL
ORGANISATION DETAILS Organisation Name: Gedoun Constructions Pty Ltd Contact Name: Joe Gedoun ACN/ABN: 52 284 873 581 Contact Position: Director Address: PO Box 1138, Townsville QLD 4810 Contact Phone
SH&EWMS No: F-C-QLD-23 Revision Date: July 2018 Revision Due: July Brief Description of Work Activity: Use Petrol Hand Saw / Ring Saw
SH&E Work Method Statement Concrete Cutting & Drilling Fast Cut Qld Pty Ltd, 91 Basalt St, GEEBUNG 4034 ABN 45 081 359 613 Phone: 07 3265 6537 Mobile: 0411 756 719 OHS-FRM-100 Rev 11 (07/18) Page 1 SH&EWMS
Issue: Issued By: Environment, Health & Safety Part: Hazard Identification and Assessment Revision #: 2 Revision
Control of Hazardous Energy Program Section: Occupational Health and Safety Date of 2007.07.24 Management System Issue: Issued By: Environment, Health & Safety Part: Hazard Identification and Assessment
CONFINED SPACE AWARENESS
Document Number: HSE09-001 June 1, 2013 AWARENESS Author: A Holland MAPP Construction - Corporate 344 Third Street Baton Rouge, LA 70801 (225) 757-0111 MAPP Construction - Houston 1511 Katy Freeway, Suite
Electrical Safety Program
Facilities Operations and Development Environmental Health and Safety 1314 Kinnear Road #106 Columbus, OH 43212-1168 614-292-1284 Phone 614-292-6404 Fax www.ehs.osu.edu Electrical Safety Program Prepared
NECA Personal Protective Equipment (PPE) Selector
NECA Personal Protective Equipment (PPE) Selector Objectives Explain why electrical contractors should follow the precautions set forth in NFPA 70E List the hazards which demonstrate why an arc flash risk
: Electric Power Generation, Transmission, and Distribution. Region IV - OSHA
1910.269: Electric Power Generation, Transmission, and Distribution Region IV - OSHA Scope This standard covers the operation and maintenance of electric power generation, control, transformation transmission,
LOCKOUT/TAGOUT PROGRAM
LOCKOUT/TAGOUT PROGRAM HOW CLIMATE ENGINEERS INC. COMPLIES WITH THELO/TO STANDARD It is the intent of Climate Engineers Inc. to comply with OSHA s Control of Hazardous Energy Standard (1910.147). The following
Job Hazard Analysis. JHA No. FBP-JHA Revision No. Draft General or Job-Specific Description of Work
JHA No. FBP-JHA-14-0014 Revision No. Draft General or Job-Specific Description of Work Clean X230 Outlet Basin Site Location PORTS Activity or Area Name Not listed Facility or Project [Unspecified] Specific
The Johns Hopkins University/The Johns Hopkins Hospital Health, Safety and Environment Manual Safety Policies:
Page 1 of 6 Keywords: Airborne Combustible, Atmospheric Monitoring, Atmospheric Oxygen, Authorized Entrant, Body Harness, Combustible Gas Meter, Communication Procedure, Confined Space, CPR, Entry, Entry
SOP GEN-007I Energy Isolation
Page 1 of 6 1.0 Introduction 2.0 Reference 3.0 Scope 4.0 Procedures 5.0 Permit SOP GEN-007I Revision/ Review Log Revision Date Approved by Reviewed by Revision Details/ Proposal Notes 11 January 2010 HSE
MUTCD Part 6D: Pedestrian and Worker Safety
MUTCD Part 6D: Pedestrian and Worker Safety Section 6D.01 Pedestrian and Worker Safety The needs and control of all road users (motorists, bicyclists, and pedestrians) within the highway, including persons
The following were determined to be confined spaces; they may not be permit required that employees of the Division of Facilities may encounter:
Confined Space Classifications The following were determined to be confined spaces; they may not be permit required that employees of the Division of Facilities may encounter: Utility Tunnels, Crawl Spaces,
21 Confined Spaces Policy Statement Responsibilities. Confined Spaces Employer Responsibilities
21 Confined Spaces 21.1 Policy Statement [Company Name] is committed to a safe, healthful workplace for its employees. Confined work spaces that present hazards to workers demand controls to reduce exposure
FLYING OBJECTS MANUAL HANDLING EXCESSIVE NOISE
JOB NO: PROJECT: DATE: SWMS NO: SWMS 002 PREPARED BY: Ian Hartley REVISED BY: Nick Bragg & Cameron McNeil ACTIVITY: STUMP REMOVAL SUPERVISED BY: REVISION DATE: April 2016 MINIMUM PERSONAL PROTECTIVE EQUIPMENT
Health and Safety Inspection Procedure
Template v4 WILTSHIRE POLICE FORCE PROCEDURE Health and Safety Inspection Procedure Effective from: 25.03.2012 Last Review Date: 10.05.2015 Version: 2.0 Next Review Date: 10.05.2018 TABLE OF CONTENTS PROCEDURE
State University of New York College at Oneonta
State University of New York College at Oneonta CONFINED SPACE ENTRY POLICY - PROCEDURE REVIEWED 05/11/17 CONFINED SPACE ENTRY - WRITTEN PLAN POLICY The State University College at Oneonta is committed
HIGH-IMPACT SAFETY TRAINING FOR QUALIFIED ELECTRICAL WORKERS
HIGH-IMPACT SAFETY TRAINING FOR QUALIFIED ELECTRICAL WORKERS This easy-to-use Leaders Guide is provided to assist in conducting a successful presentation. Featured are: INTRODUCTION: A brief description
Occupational Health Safety and Welfare. Our Policy
Occupational Health Safety and Welfare Our Policy OCUPATIONAL HEALTH AND SAFETY POLICY Management of QI Electrical Services is committed to ensuring, as far as responsibly practicable, that all employees
Why do I need to do an Arc-Flash Analysis?
Why do I need to do an Arc-Flash Analysis? Presented By Tom Norwood for Alexander Nizov, P.E. Principal/Manager Electrical Engineering Division TRAINING INSTITUTE, INC. A SUBSIDIARY OF MEGGER Hazards Analysis
SAFEWORK PRACTICES EQUIVALENCY PROCEDURE FOR ACCESSING FLOATING ROOF TANKS ON STORAGE TANKS IN SERVICE CAT A-2 SOP #33
SUNCOR ENERGY PRODUCTS DISTRIBUTION TERMINAL OPERATING MANUAL STANDARD OPERATING PROCEDURE SAFEWORK PRACTICES EQUIVALENCY PROCEDURE FOR ACCESSING FLOATING ROOF TANKS ON STORAGE TANKS IN SERVICE Date Issued:
100 Questions on Electrical Safety Study Guide
100 Questions on Electrical Safety Study Guide Be advised that only 95 of 100 questions are presented here for the purpose of discouraging cheating on the final exam. 1. Why is electrical safety important?
This is (Enter Company Name Here) Arc Flash Prevention policy. (Enter Name Here) will be responsible for overall direction of the Safety Program.
Company Name: Policy/Procedure ID Number: 222 Date: Grainger Safety Services Inc. 2012 Arc Flash Prevention Policy This is (Enter Company Name Here) Arc Flash Prevention policy. (Enter Name Here) will
SH&EWMS No.: F-C-QLD-10 Revision Date: July 2018 Revision Due: July 2019
OHS-FRM-103 Rev11 (07/18) SH&E Work Method Statement Concrete Cutting & Drilling Fast Cut Qld Pty Ltd, 91 Basalt, GEEBUNG ABN 45 081 359 613 Phone: 07 3889 8827 Mobile: 0411 756 719 Page 1 SH&EWMS No.:
Lockout / Tagout Program. The Control of Hazardous Energy. Environmental Health and Safety Office
Lockout / Tagout Program The Control of Hazardous Energy Environmental Health and Safety Office Revised: 07/2014 TABLE OF CONTENTS 1.0 PURPOSE STATEMENT... 1 2.0 SCOPE:... 1 3.0 RESPONSIBILITY:... 2 4.0
Best Practice #207. Facility: Entire DOE Complex. Best Practice Title: Identification of Look-Alike Electrical Equipment
Best Practice #207 Facility: Entire DOE Complex Best Practice Title: Identification of Look-Alike Electrical Equipment Point of Contact: Stephanie Collins, LBNL, SLCollins@lbl.gov, 510-486-4914; Mark Mathews,
Power Unit 075. Maintain Substation Circuit Breakers
Power Unit 075 Maintain Substation Circuit Breakers The specification details the required skills, knowledge and behaviours to establish competence to carry out the maintenance of high voltage power circuit
Standbys. (Owner: Risk Management Section Supervisor)
BTCP/BTRF Standbys (Owner: Risk Management Section Supervisor) Site Safety Standard 5500 Introduction Scope The purpose of this standard is to specify detailed roles and responsibilities of Standby personnel
WORK METHOD STATEMENT STRUCTURAL STEEL
ORGANISATION DETAILS Organisation Name: Gedoun Constructions Pty Ltd Contact Name: Joe Gedoun ACN/ABN: 52 284 873 581 Contact Position: Director Address: PO Box 1138, Townsville QLD 4810 Contact Phone