STATE CERTIFICATION CONTINUOUS EDUCATION SPRING 2018

Transcription

1 STATE CERTIFICATION CONTINUOUS EDUCATION SPRING 2018 The San Joaquin & Calaveras Counties Electrical JATC invites you to attend the Continuous Education classes for State Certification to be held at the Stockton Electrical Training Center. All classes count toward the 32-hour Continuing Education requirements for Electrical Certification. There will be minimum and maximum class sizes. Local 595 members will have priority registering for classes, all IBEW members and union industry affiliates are welcome to attend. Please check website for any new dates/classes EPS 1 - Beginning electrical supervision class. Classes are 4 hours for three nights a week for two weeks. 20 hours of CE hour s credit will be awarded to individuals attending. All Classes must be attended for credit. NECA-Beginning Estimating - Four, 8 hour classes covering Basic Electrical Estimating. 24 hours of CE credits will be awarded to individuals attending. All Classes must be attended for credit. LABOR STUDIES - Three hour classes for four evenings covering union agreements, employee & employer responsibilities, job safety, and Job-Steward s position. All classes required for credit. CPR/FIRST AID - four hour class for one evening. OSHA 10 - Three hour and thirty-minute class for three nights. All classes must be attended for credit. OSHA 30 - Three hour class for seven nights. All classes must be attended for credit. OSHA 10 is part of the 30 hours and must be from the same instructor with-in the past 6 months. HARASSMENT IN THE WORKPLACE Three hour class covering Harassment in the Workplace. This meets the requirements Supervisor Harassment Training. CONFINED SPACE TRAINING Three hour, one night course covering confined space entry. FIRE ALARM - Three hour class for six nights and five of six must be attended for credit. Only hours attended will be credited. VFD 101- Three hour course for four nights and three sessions must be attended for credit. Only hours attended will be credited. CONDUIT BENDING - Three hour course for three nights and all classes must be attended for credit. IDEAL VENDER DEMO, BEST TORQUE PRACTICES -Three hour course on the best practices and uses of Ideal Torque tools. GREENLEE VENDER DEMO, PVC BENDING Three hour course on the practical application and uses of Greenlee electric heaters and blankets HILTI VENDER DEMO, FIRESTOP & POWDER ACTUATED TOOLS Three hour course on the practical application and best practices of using Hilti Firestop products and Hilti powder actuated tools NFPA 70E Three hours for two evenings. Based on 2018 NFPA 70E. Both classes required for credit LEVITON VENDER DEMO, TITLE UPDATE- COMPUTER BASICS- Three hour class for three nights. Covering Microsoft Word, Outlook, & Excel BASIC SURVEYING- 1

2 STOCKTON TRAINING CENTER CONTINUOUS EDUCATION SPRING 2018 CLASS SCHEDULE (Contact Office to Register for classes - payment is not due until the first evening of the class) EPS 1 Mon-Tue-Wed 4:30 8:30 PM Jan. 22, 23, 24, 29, 30, 31, 2018 Cost call NECA LABOR STUDIES Tuesday - Thursday 5:00 8:00 PM February 6, 8, 13, 15, 2018 Cost: No cost NECA BEGINNING ESTIMATING Mon-Tue-Wed-Thurs. 8 AM- 4 PM February 5, 6, 7, 8, 2018 Cost call NECA HARASSMENT SUPERVISOR TRAINING Monday, January 22, :00 8:00 PM (2 Dates for Same Class) Tuesday, March 13, 2018 Cost: No Cost CPR/FIRST AID Thursday 5:00 9:00 PM May 3, 2018 Cost: $25.00 OSHA 10 Tuesday - Thursday 5:00 8:30 PM March 27, 29 & April 3, 2018 Cost: $20.00 OSHA 30 Tuesday-Wednesday-Thursday 5:00-8:00 PM April 10, 11, 12, 17, 18, 19, 2018 Cost: $20.00 NFPA 70E Monday - Tuesday 5:00-8:00 PM February 12, 13, 2018 Cost: $20.00 CONFINED SPACE Wednesday 5:00-8:00 PM May 9, 2018 Cost: $20.00 VFD 101 Tuesday - Thursday 5:00 8:00 PM April 17, 19, 24, 26, 2017 Cost: $20.00 FIRE ALARM Monday Wednesday 5:00 8:00 PM April 4, 9, 11, 16, 18, 23, 25, 2018 Cost: $25.00 CONDUIT BENDING Monday - Wednesday 5:00-8:00 PM February 26, 28, & March 5, 2018 Cost: $25.00 BASIC SURVEYING (Check Website) BASIC COMPUTER SKILLS Tuesday - Thursday 5:00 8:00 PM February 27, March 1, & 6 Cost: $25.00 TITLE 24 LIGHTING REQUIREMENTS (Check Website) 5:00 8:00 PM Cost: No Cost ACCEPTANCE TESTING / LIGHTING (Check Website) 5:00 8:00 PM Cost: $50.00 HILTI POWDER ACTUATED TOOLS Wednesday 5:00 8:00 PM & FIRESTOP February 21, 2018 Cost: No Cost IDEAL-BEST TORQUE PRACTICES Thursday, 5:00 8:00 PM March 29, 2018 Cost: No Cost GREENLEE-PVC HEATERS Thursday 5:00 8:00 PM April 26, 2018 Cost: No Cost 2

3 EPS 1 Mondays - Tuesday - Wednesday 4:30 PM - 8:30 PM C.E. Hours: 24 hours (20 hours credited toward Continuous Education for State Certification) Dates: January. 22, 23, 24, 29, 30, 31, 2018 Class Size: 20 Maximum Instructor: Bob Tiemen Description: This class will focus on new foreman or future foreman skills organizing crews, writing RFI s communication skills, leadership qualities, and understanding the role of a foreman. THIS IS A FOREMAN CALL OUT REQUIREMENT. Cost: JOURNEYMAN NEED TO CONTACT THE NECA OFFICE AT FOR ENROLLMENT AND COST. THE JATC ONLY FACILITATES THE CLASS. LABOR STUDIES STEWARDS CLASS Tuesday & Thursday 5:30 PM - 8:30 PM C.E. Hours: 12 Hours Dates: February 6, 8, 13, 15, 2018 Class Size: 8 Minimum 20 Maximum Instructors: Union Reps & I/O Reps. Description: The classes will cover the collective bargaining agreement, IBEW 595 job referral procedures, portability and clearances, and California jobsite requirements and Stewards responsibilities. THIS IS A FOREMAN CALL OUT REQUIREMENT. Cost: No Cost NECA BEGINNING ESTIMATING Mon-Tue-Wed-Thurs. 8 AM- 4 PM C.E Hours: 24 hours Dates: February 5, 6, 7, 8, 2018 Class Size: Minimum Limit Instructor: Bob Mooty Description: Basic Estimating of Electrical Construction, this class will discuss the process for assembling an estimate including: developing material lists, applying labor unit data, material takeoff and application of direct job costs, overhead and profit. Prerequisite: Completion of NECA s Introduction to the Manual of Labor Units online course (included in registration). Cost JOURNEYMAN AND INDUSTRY AFFILIATES NEED TO CONTACT THE NECA OFFICE AT FOR ENROLLMENT AND COST. THE JATC ONLY FACILITATES THE CLASS. 3

4 HARASSMENT SUPERVISOR TRAINING Monday & Tuesday (Same Class both Dates) 5:00 8:00 PM C.E Hours: 3 hours Dates: January 22, 2018 & March 13, 2018 Class Size: No Minimum, No Maximum Description: Anti-Harassment Supervisor Training needs to be retaken every two years. Cost: No Cost CPR/FIRST AID Thursday 5:00 PM - 9:00 PM C.E. Hours: 4 hours Dates: May 3, 2018 Description: Certification in emergency response CPR and Basic First Aid. THIS IS A FOREMAN CALL OUT REQUIREMENT. Cost: $25.00 OSHA 10 Tuesday - Thursday 5:00 PM 8:30 PM C.E. Hours: 10 hours Dates: March 27, 29 & April 3, 2018 Description: This course will familiarize students with occupational and health hazards related to the construction industry. OSHA-10 card issued upon successful completion of all three classes. THIS IS A FOREMAN CALL OUT REQUIREMENT. Cost: $20.00 OSHA 30 Tuesdays, Wednesday & Thursday 5:00 PM - 8:30 PM C.E. Hours 20 Dates: April 10, 11, 12, 17, 18, 19, 2018 Class Size: 8 Minimum 12 Maximum Prerequisite: OSHA 10 within the last 6 month from the same instructor. Description This course is a more extensive & broader outlook regarding occupational and health hazards related to the construction industry mandated for supervision on most job sites. Cost: $

5 NFPA 70E 2018 Monday & Tuesday C.E. Hours: 6 hours Dates: February 12, 13, 2018 Class Size: 10 Minimum, 12 Maximum Description: Course focus is on NFPA 70E standard for electrical safety in the workplace. Topics include hazard assessment, energized work permits, PPE selection and limitations. Cost: UGLY S NFPA 70E (version 2018) $25.00 CONFINED SPACE Wednesday 5:00 PM 8:00 PM C.E. Hours: 3 hours Dates: May 9, 2018 Class Size: 8 Minimum, 12 Maximum Description: Confined Space training, will cover permit and non-permit entry, OSHA requirements, air sampling, ventilation, and retrieval equipment. Cost: $20.00 VFD 101 Tuesday - Thursday C.E. Hours: 12 hours Dates: April 17, 19, 24, 26, 2017 Instructor: Gary Keeney Description: This will focus on the basic fundamentals of wiring applications, and programming of variable frequency drives, and their use in the industry. Cost: $20.00 FIRE ALARM 101 Monday - Wednesday C.E. Hours: 18 Hours Dates: April 4, 9, 11, 16, 18, 23, 25, 2018 Instructor: Joe Olguin Description: Students will pull wire, terminate, active and troubleshoot a fire alarm system in the JATC fire Alarm Lab. Topics include the placement and utilization of equipment, sizing of components and calculations. Students must attend five of six classes for credit. Cost: $

6 CONDUIT BENDING TECHNIQUES 101 Monday - Wednesday C.E. Hours: 9 hours Dates: February 26, 28, & March 5, 2018 Class Size: 10 Minimum, 15 Maximum Instructor: Mike Maloney Description: This course will expose journeyman to proper techniques of bending EMT and rigid conduit with hand and mechanical benders in a safe and productive process. Cost: $25.00 BASIC SURVEYING Basic Computer Skills Tuesday Thursday 5:00 PM 8:00 PM C.E. Hours: 9 Hours Dates: February 27, March 1, & 6 Instructor: Tanya Anderson, Certified Microsoft Master Specialist Description: This course will cover Microsoft Word, Outlook, & Excel. Computers are available, but you are welcome to bring your own. Cost: $25.00 TITLE 24 LIGHTING CONTROL C.E. Hours: 3 Hours Dates: Instructor: Leviton Rep, Ron France Description: This class will cover much of the new title 24 lighting requirements Cost: No Cost ACCEPTANCE TESTING LIGHTING CONTROL Tuesdays - Thursdays 5:00-8:00 C.E. Hours: 27 hours Dates: Instructor Mark Stoakes Description: This class is to qualify those who took CALCTP to be able to test functionality of electrical lighting systems via Title 24. This is not an inspector job. Pre-requisite: Completion of online course modules available on the Lighting Controls Association Website (10hrs) check CALCTP website Cost: $

7 HILTI POWDER ACTUATED TOOLS & FIRESTOP Wednesday 5:00 8:00 PM C.E. Hours: 3 hours Dates: February 21, 2018 Instructor: Hilti Rep. Description: Proper use of Hilti powder actuated tools, and practical applications of Hilt Firestop products. Cost: No Cost IDEAL-BEST TORQUE PRACTICES Thursday 5:00 8:00 PM C.E. Hours 3 hours Dates: March 29, 2018 Instructor: Ideal Rep. Description: Proper maintenance, calibration, storage, and use of Ideal Torque tools. Cost: No Cost GREENLEE-PVC HEATERS Thursday 5:00 8:00 PM C.E. Hours: 3 hours Dates: April 26, 2018 Instructor: Greenlee Rep. Description: Proper maintenance, and use of Greenlee PVC heaters/blankets for PVC Pipe ¾ -4 Cost: No Cost 7