1. Set up your Stick Up Cam Wired.
|
|
- Alannah Bates
- 5 years ago
- Views:
Transcription
1 Stick Up Cam Wired
2 1. Set up your Stick Up Cam Wired.
3 Download the Ring app. The app walks you through setting up and managing your Stick Up Cam Wired. Search for Ring in one of the app stores below, or visit: ring.com/app Grab your Wi-Fi password. You ll need it to set up your Stick Up Cam. Write it down below so it s handy when you need it: Your Wi-Fi password
4 Let s get your Stick Up Cam ready. First, slide off the bottom cover. Do not reattach this cover until setup is complete! Powering your Stick Up Cam You can power Stick Up Cam in one of two ways: Plug it into a socket (with USB), or power it with the included Ring PoE Adapter, which supplies Power over Ethernet. If you re installing Stick Up Cam indoors, you can use either power supply. For outdoors, use the PoE Adapter. 4
5 To power Stick Up Cam with USB: (For indoor use only) Feed the included USB cable through the hole in the bottom cover and plug it into your Stick Up Cam. Then, connect the cable to the included USB power supply, and plug the power supply into a socket. 5
6 To power Stick Up Cam with the PoE Adapter: (For indoor or outdoor use) Feed an Ethernet cable through the hole in the bottom cover and plug it into your Stick Up Cam. Then, hook it up with the included PoE Adapter, following this diagram. For outdoor use, install the PoE Adapter indoors, then run an Ethernet cable outdoors to your Stick Up Cam. 6
7 Security Cams Set up your Stick Up Cam in the Ring app. In the Ring app, select Set Up a Device. When prompted, select Security Cams and follow the in-app instructions. Try it out! After setup, tap the Live View button in the Ring app to see live video from your Stick Up Cam. Blue light flashing? If the light on the front of your Stick Up Cam is flashing after setup, it s updating its software. Do not unplug your Stick Up Cam while the light is flashing!
8 2. Install your Stick Up Cam Wired. Choose a location. Stick Up Cam is happy just about anywhere, indoors or out. It comes ready to sit on a flat surface like a table or shelf, but can also be mounted to a wall or ceiling. Choose a spot where it can provide the view you want, within reach of a power outlet or an Ethernet port with PoE. Table or shelf Mounted on a wall Mounted on a ceiling 8
9 How to use Stick Up Cam on a table or shelf: Make sure that any connected cables have been routed through the hole in the bottom cover. Then, slide the cover into place on your Stick Up Cam. Secure the cover with the attached screw, using the star-shaped end of the screwdriver bit. Finally, place Stick Up Cam in your chosen position. Your Stick Up Cam is now ready to protect you. 9
10 How to install Stick Up Cam on a wall: Remove the plastic cover and rubber pad from the base. You ll put the cover back on once you ve mounted your Stick Up Cam. Flip the base to the rear. The base of the stand is hinged. Before wall-mounting, flip the base down and behind your Stick Up Cam. 10
11 Push the rubber pad back into the base. The rubber pad should sit between your wall and the base of your Stick Up Cam. Drive the screws. Hold the round part of the base against your wall, rubberside down. Use the integrated level to ensure it s straight. Then mount it with the included screws. 11
12 How to install Stick Up Cam on a ceiling: Remove the plastic cover from the base. You ll put the cover back on once you ve mounted your Stick Up Cam. Rotate the stand above the camera: The whole stand can rotate on its axis. Before ceilingmounting, rotate the stand 180 degrees so the base is positioned above your Stick Up Cam. 12
13 Drive the screws. Hold the round part of the base against your ceiling, rubber-side down. Then mount it with the included screws. 13
14 Final steps for wall or ceiling mounting: Close it up. Make sure that any connected cables have been routed through the hole in the bottom cover. Then, slide the cover into place on your Stick Up Cam. Secure it with the attached screw, using the star-shaped end of the screwdriver bit. 14
15 Snap the cover back onto the base. Then, secure it with the included security screw, using the star-shaped end of the screwdriver bit. Now your Stick Up Cam is installed and ready to protect you. 15
16 ?? ring.com/help For a list of all our customer support numbers, visit: ring.com/callus. To review your warranty coverage, please visit Patents: Ring LLC or its affiliates. RING, ALWAYS HOME, and all related logos are trademarks of Ring LLC or its affiliates. Last updated: 11/15/18
Stick Up Cam Wired. 02_Stick_Up_Cam_Wired_MANUAL_ANZ.indd 1
Stick Up Cam Wired 02_Stick_Up_Cam_Wired_MANUAL_ANZ.indd 1 10/16/18 1:05 PM 1. Set up your Stick Up Cam Wired. Download the Ring app. The app walks you through setting up and managing your Stick Up Cam
More information1. Set up your Stick Up Cam Wired.
Stick Up Cam Wired 1. Set up your Stick Up Cam Wired. Download the Ring app. The app walks you through setting up and managing your Stick Up Cam Wired. Search for Ring in one of the app stores below, or
More informationStick Up Cam Battery
Stick Up Cam Battery 1. Charge and insert the battery. Remove the battery cover. Twist the battery cover counterclockwise to unlock, then remove it from your Stick Up Cam. Charge the provided battery.
More informationNEULOG OXYGEN LOGGER SENSOR GUIDE
NeuLog oxygen logger sensor NUL-205 The oxygen sensor can be used for any science experiment or activity where oxygen levels, dissolved or gaseous, are required. Some fields of study include Chemistry,
More informationWritten By: Matt Newsom
PSP 300xc UMD Door Replacement Replace the UMD door for a PSP 300xc Written By: Matt Newsom ifixit CC BY-NC-SA www.ifixit.com Page 1 of 13 INTRODUCTION Has the UMD door on your PSP 3000c seen better days?
More informationBasketball Instructions
Quality Family Games Basketball Instructions Model 752.69 Product Registration 752.69 08/14/14 Visit www.carrom.com to register your product to receive the latest product updates, special offers, and other
More informationWritten By: Matt Newsom
PSP 300xc Power Switch Board Replacement Replacing the power switch board for a PSP 300xc. Written By: Matt Newsom ifixit CC BY-NC-SA www.ifixit.com Page 1 of 11 INTRODUCTION Has the power switch broken
More informationFor The First Time Quad Doppler Radar and Dual Photometric Cameras in One Launch Monitor.» User Manual
For The First Time Quad Doppler Radar and Dual Photometric Cameras in One Launch Monitor» User Manual TABLE OF CONTENTS ES16 TOUR GETTING STARTED Package Contents Installing the Battery Selecting a Club
More informationINSTALLATION INSTRUCTIONS
EDGEMERE CENTERSET LAVATORY FAUCET INSTALLATION INSTRUCTIONS 708.0 Thank you for selecting American Standard... the benchmark of fine quality for over 00 years. To ensure that your installation proceeds
More informationCyclops + Cyclops + Written By: John Bamford e3d-online.dozuki.com/ Page 1 of 18
Cyclops + Written By: John Bamford 2018 e3d-online.dozuki.com/ Page 1 of 18 TOOLS: Philips Screwdriver (1) Hex Wrench, 1.5mm (1) PARTS: Plastic Screws (2) Collet (2) Collet Clip (2) 30mm Fan (1) Cyclops
More informationInstallation Instructions
Installation Instructions COLONY SOFT 7.0 Centerset Lavatory Faucet 7.0 with Speed Connect Drain Congratulations on purchasing your American Standard faucet with the Speed Connect drain, a features found
More informationULTIMATE 12 RUDDER INSTALLATION INSTRUCTIONS
ULTIMATE 12 RUDDER INSTALLATION INSTRUCTIONS TOOLS NEEDED: DRILL ¼ DRILL BIT ¾ HOLE SAW 3/16 DRILL BIT PHILLIPS HEAD SCREWDRIVER 7/16 WRENCH HEAT SOURCE: PROPANE TORCH, LIGHTER OR HOT AIR GUN WIRE CUTTER
More informationAscent Overview. Cellular Access Control Systems Powered by Summit Control
Ascent Overview Cellular Access Control Systems Powered by Summit Control How It Works Summit Control securely handles all communication and gives you a full suite of features FIRE WALL $ SECURI TY BRANDS,
More informationTrackMan Operator Training
TrackMan Operator Training The following setup and use information is the same for using TrackMan in the Indoor setting or Outdoor setting unless noted Extend the two bottom legs and single back leg before
More informationSAVE THESE INSTRUCTIONS DEALER/INSTALLER: GIVE TO HOMEOWNER OCEAN BLUE ABOVE GROUND POOL LADDERS
SAVE THESE INSTRUCTIONS DEALER/INSTALLER: GIVE TO HOMEOWNER OCEAN BLUE ABOVE GROUND POOL LADDERS ASSEMBLY AND INSTALLATION MANUAL FOR A-FRAME AND INPOOL LADDERS A-FRAME Part No. 400100 PROUDLY MADE IN
More informationATOC Meteorological Tower (6 meter-4 level) Guide
ATOC Meteorological Tower (6 meter-4 level) Guide SETUP Outline 1. Siting 2. Components 3. Transportation 4. The Tower 5. The Cables and Data Logger Siting Selecting an appropriate site for the weather
More informationLectric Cycles Mid-Drive Electric Motor Installation
Lectric Cycles Mid-Drive Electric Motor Installation This write-up describes the installation of a Lectric Cycles electric motor. The model is the e-rad Mid-Drive 750 Watt conversion kit, installed on
More informationHOME ASSEMBLY INSTRUCTIONS
HOME ASSEMBLY INSTRUCTIONS This Papillionaire Bicycle now belongs to you. It will take you to work, wait patiently outside your local cafe, and carry your groceries home. This is the start of your long-term
More informationRead through all the steps first before working on the camera. Make sure you know what to do.
Step-by-step procedure to fix lack of contact in the end-of-travel switch of a D700 pop-up flash DISCLAIMER: PLEASE UNDERSTAND THAT IF YOU DECIDE TO FOLLOW THE INFORMATION PROVIDED BELOW YOU DO SO AT YOUR
More informationUnderwater Housing for Canon G7X Mark II
Underwater Housing for Canon G7X Mark II Product Number 6146.08 Product Registration Please register your product at ikelite.com within 15 days of purchase. Our product registration database is the best
More informationU STAND INSTALLATION INSTRUCTIONS
U STAND INSTALLATION INSTRUCTIONS Thank you for purchasing the incredible new U STAND by Stand N Fish. Once installed on your kayak the U STAND will enhance your kayak fishing enjoyment to a whole new
More informationSECTION 2 RING MOUNT
SECTION 2 RING MOUNT Rotax aircraft engines are manufactured and supported by Rotax GmbH of Austria. Read and understand the Rotax manuals completely before starting with the engine installation, as they
More informationDeskCycle USER S MANUAL. Ellipse QUESTIONS / PROBLEMS. Order# Support and Contact: See the support link at DeskCycle.com
DeskCycle Ellipse USER S MANUAL Visit us at www.deskcycle.com for: Usage Tips Calorie Calculator Accessories And More QUESTIONS / PROBLEMS Order# Support and Contact: See the support link at DeskCycle.com
More informationAdapter Kit 5WAR RA NT Y. For use with EZ-Up Gravity Boots and select Teeter Inversion Tables* NEW! Assembly Instructions FULL YEAR
NEW! Follow along with your smartphone to make assembly even easier! Adapter Kit For use with EZ-Up Gravity Boots and select Teeter Inversion Tables* Assembly Instructions FULL YEAR 5WAR RA NT Y Specifications
More informationKonza District Pinewood Derby Track Parts And Assembly Instructions
Konza District Pinewood Derby Track Parts And Assembly Instructions - 1 - Pinewood Derby Track Parts List: Box 1 of 3 2 each - Race Track Flat Sections 1 each - Race Track Finish Line Section 1 each -
More informationCamRT Sun Top Bimini Installation Instructions
CamRT Sun Top Bimini Installation Instructions C910-07 & C910-08 Rev. 16-Jun-15 Information: info@roswellglobal.com Warranty: warranty@roswellglobal.com Questions? Please call us at (31) 638-1331 Setup:
More informationMisaligned Folds Paper Feed Problems Double Feeds Won t Feed FLYER Won t Run iii
Operator s Manual Table of Contents Operator Safety... 1 Introduction... 2 Unpacking and Setup... 3 Unpacking... 3 Setup... 4 FLYER Overview... 5 FLYER Diagram... 5 Capabilities... 5 Control Panel... 6
More informationSurvey Technical Support Notes October 2015
Survey Technical Support Notes October 2015 SonarMite with Trimble Access Overview: Trimble Access software, when connected to a SonarMite will store water depths associated with field measurements. Equipment:
More informationInstallation Guide, MPower Echelon Console
Installation Guide, MPower Echelon Console AC Performance, AC Sport and AC Performance Plus Schwinn Echelon Console (External Routing) 1. Install batteries to console. Mount the console to the bike. 2.
More informationFree2Go Instruction Guide
Free2Go Instruction Guide Updates to these instructions will be posted on HTTP://ForTheSmart.com/Instructions. Please check back from time to time. WARNING: The device is designed for 1 and only 1 bicycle
More informationDT400/436 Tee Connector Installation Instructions
Connectors Lorem ipsum and dolor Splices sit Amat Effective September 2014 Supersedes IS550-30-1 March 2011 MN650001EN DT400/436 Tee Connector Installation Instructions DISCLAIMER OF WARRANTIES AND LIMITATION
More informationUser Manual GRI- 1500Li
User Manual GRI- 1500Li Your Cart Tek caddy cart was thoroughly quality control checked and road tested before being shipped to your address. We do everything possible to assure that your caddy is in perfect
More informationSUPPORTING THE ART OF PHOTOGRAPHY ORBIT TRIPOD
SUPPORTING THE ART OF PHOTOGRAPHY ORBIT TRIPOD ORBIT TRIPOD Thanks for choosing 3POD s Orbit tripod! The Orbit tripod is a full service photo and video tripod, featuring fully adjustable legs and shaft,
More informationCongratulations, once again, on buying an E RIDER Model 18!!!!
Congratulations, once again, on buying an E RIDER Model 18!!!! USER MANUAL We are sure you will be excited by the delivery of your brand new bike and you will be eager to start using your E RIDER as soon
More informationSterisil Ac+ Installation & Operating Manual
Sterisil Ac+ Installation & Operating Manual 719 622 7200 Sterisil.com Arbor Dental Associates 2 Table of Contents Introduction 4 Sterisil Ac + Features 5 Installation Instructions 6 Maintenance 10 Troubleshooting
More informationIMPORTANT: Please read instructions carefully prior to use!
TABLE TENNIS ROBOT AMICUS PROFESSIONAL OPERATION MANUAL IMPORTANT: Please read instructions carefully prior to use! 1. Assembly p.2 2. Control Panel (Quick Reference Guide) p.3 3. Operation p.4 3.1 Starting
More informationPSP 300x Analog Stick Replacement. Written By: mbnewsom. ifixit CC BY-NC-SA Page 1 of 14
PSP 300x Analog Stick Replacement Written By: mbnewsom ifixit CC BY-NC-SA www.ifixit.com Page 1 of 14 INTRODUCTION Guide for removing the Analog stick in a Sony PSP-3000 TOOLS: Phillips #00 Screwdriver
More informationBladerider X8 Assembly Help Notes
2.1 Remove All Parts & Have Some Tools Handy Remove all items from the box and identify each part as per the packing sheet and check that nothing is missing. If there is something missing, please email
More informationUnderwater Housing for Panasonic Lumix DMC-ZS60, DMC-TZ80
Underwater Housing for Panasonic Lumix DMC-ZS60, DMC-TZ80 Product Number 6170.60 Product Registration Please register your product at ikelite.com within 15 days of purchase. Our product registration database
More informationRPS900W Redundant Power Supply. Installation Guide.
RPS900W Redundant Power Supply Installation Guide www.edge-core.com Installation Guide RPS900W Redundant Power Supply Single DC Output Port with Dual Output Voltages RPS900W E10013-CS-R01 1500000081A
More informationRelay Judging Platforms with Speedlights
Relay Judging Platforms with Speedlights RJPLD User Guide F968 Rev. 201501 Customer Service Department www.coloradotime.com Email: customerservice@coloradotime.com Phone: 970-667-1000 Toll Free U.S. /Canada
More informationCHAPTER 5 REWIND STARTERS
GENERAL INFORMATION CHAPTER 5 REWIND S Rewind starters used on vertical shaft Tecumseh engines are top mount horizontal pull style or side mount vertical pull style. Horizontal shaft engines use side mounted
More informationHelium Micro Air Vehicle (MAV)
Helium Micro Air Vehicle (MAV) By Fawaz Alenezi, Hamoud Alkhaldi, Abdulrahman Almuqhawi, Matthew Kohr, Conrad Nazario, Randal Spencer Operations Manual May 6, 2016 Submitted towards partial fulfillment
More informatione.do Gripper Safety requirements, technical features and assembly and integration instructions
e.do Gripper Safety requirements, technical features and assembly and integration instructions Requirements, technical features and instructions for safe installation and use of the e.do Gripper. CR00758190-en_00/2018.05
More informationShimano Di2 Installation on S5
Installing Shimano Dura Ace Di2 Shifting Systems Note these instructions and pictures are for assembling the Shimano Dura Ace Di2 system (Internal Spec) on the Cervélo S5 frame. The Shimano Ultegra Di2
More informationAssembly Tools. Assembly will take 1-2 hours
Assembly Tools Included in your parts box: Pedals Quick release skewer Reflectors (if not already installed) Toolkit (4+5mm combo Allen wrench, 13+15mm combo open-end wrench) Helpful Tools: Scissors (for
More informationicreasepro Creaser Operators Manual
6-2013 Version 3.0 icreasepro Creaser Operators Manual WWW.MBMCORP.COM 800-223-2508 TABLE OF CONTENTS SPECIFICATIONS.1a SAFETY PROCEDURES/CARE & MAINTENANCE..1b COMPONENT IDENTIFICATION 2 TOUCH SCREEN
More informationStand-N-Fish FULL DETAIL INSTALLATION INSTRUCTIONS
1 Stand-N-Fish FULL DETAIL INSTALLATION INSTRUCTIONS Thank you for purchasing the incredible new Stand-N-Fish Kayak Fishing System. Once installed on your kayak the Stand-N-Fish will take your kayak fishing
More informationFalcon 3 145, 170, 195 and Tandem Owner / Service Manual
Falcon 3 145, 170, 195 and Tandem Owner / Service Manual January 2007 - Second Edition Removing The Sail From The Airframe And Short Packing The Glider Many maintenance and repair procedures will require
More information2019 MADONE ASSEMBLY MANUAL
2019 MADONE ASSEMBLY MANUAL 2019 MADONE Rim brakes and Di2 drivetrain Rim brakes and mechanical drivetrain Disc brakes and Di2 drivetrain Disc brakes and mechanical drivetrain TABLE OF CONTENTS Common
More informationInstallation Instructions
Installation Instructions COLONY SOFT 7.0 Single Control Lavatory Faucet with Speed Connect Drain Congratulations on purchasing your American Standard faucet with the Speed Connect drain, a feature found
More information222 Schwinn Recumbent Exercise Bike Parts List Full Size Hardware Chart Product Illustration Assembly Instructions
222 Schwinn Recumbent Exercise Bike Parts List Full Size Hardware Chart Product Illustration Assembly Instructions FITNESS SAFEGUARDS AND WARNINGS Before starting any exercise program, consult with your
More informationThank you for purchasing your new Empire Reloader B Sound-Activated 3-Speed Paintball Hopper!
Thank you for purchasing your new Empire Reloader B Sound-Activated 3-Speed Paintball Hopper! Should you require any technical assistance on the use of this product, or if your product needs servicing,
More informationWIND CLIPPER KTS ILLUM SCALE INC DEC CLIPPER WIND SYSTEM
CLIPPER WIND KTS ILLUM SCALE DEC INC CLIPPER WIND SYSTEM TABLE OF CONTENTS INTRODUCTION PRE-TEST OF INSTRUMENT INSTALLING THE MASTHEAD SENSOR UNIT INSTALLING THE DISPLAY NORMAL OPERATION CHANGING THE
More informationUser Guide. Tripod. flowtech 75 / 100 Tripod. Part No. S S
User Guide flowtech 75 / 100 Tripod Tripod Part No. S2051-0001 S2052-0001 EN www.sachtler.com TM Copyright 2018 All rights reserved. Original Instructions: English All rights reserved throughout the world.
More informationUSER MANUAL. you pedal, something amazing happens
TM USER MANUAL you pedal, something amazing happens THANK YOU! In our humble beginnings we ran a bike-powered smoothie booth at Northern California music festivals called The Juice Pedaler. We saw the
More informationListe de pièces Lista de Piezas Parts List
S Liste de pièces Lista de Piezas Parts List 4 4-14 April 014 1 1 14 1 13 13 17 8 7 1 3 4 11 1 1 0 Singer S Ref No Part No Part Name 1 800400 Front cover (unit) S NA Front cover 3 N/A Button 4 N/A Button
More informationINSTRUCTION MANUAL. January 23, 2003, Revision 0
INSTRUCTION MANUAL Model 810A In-Vitro Test Apparatus for 310B Muscle Lever January 23, 2003, Revision 0 Copyright 2003 Aurora Scientific Inc. Aurora Scientific Inc. 360 Industrial Parkway S., Unit 4 Aurora,
More informationI.H.S INSTALLATION INSTRUCTIONS
I.H.S INSTALLATION INSTRUCTIONS TOOLS REQUIRED The following tools will be required for installation of your I.H.S. system. Item Qty Needed 9/16 Open End Wrench 2 3/4 Open End Wrench 1 1/2 Open End Wrench
More informationRev I MEGATOUCH ELITE EDGE ION ASSEMBLY 1
MP0097-01 (USB enclosure) SA0400-01 HW8748-02 (dual fan assembly) (CPU section lock) EC0163-01 (AC/stacker cable) MW0780-02 (power supply bracket) (wireless adapter) SA10070-XX (motherboard) MP0092-01
More informationGT-4130 STUNT PLANE. 3 Channel 2.4GHz RC Aeroplane Modelled after the famous Cessna 182 Skylane SKYLARK (GT-4130) Contents & Accessories
GT-4130 STUNT PLANE 3 Channel 2.4GHz RC Aeroplane Modelled after the famous Cessna 182 Skylane SKYLARK (GT-4130) Contents & Accessories Remote Control Remote Control Setup BATTERY & POWER SPECIFICATION
More informationAR740 RPS Redundant Power Supply Quick Install Guide
AR740 RPS Redundant Power Supply Quick Install Guide AT-RPS 740 Quick Install Guide Document Number. 1999-2006 Allied Telesis Inc. All rights reserved. No part of this publication may be reproduced without
More informationRef Part Part # Qty Letter A Rudder Catcher B X 1/2 PH Bolts C Rudder Bracket
Ref Part Part # Qty A Rudder Catcher 07.2694.0000 1 J B Q A B 10-32 X 1/2 PH Bolts 07.2136.0000 10 C Rudder Bracket 07.2689.0000 1 D Kayak Pad Eye 01.1315.0430 2 E Cherry Rivets 01.1315.0459 4 H T N P
More informationBR-2444 ROWING MACHINE
BR-2444 ROWING MACHINE Important Safety Information Please keep this manual in a safe place for reference. 1. It is important to read this entire manual before assembling and using the equipment. Safe
More informationROMPA SUPA SPARKLE BUBBLE TUBE 20288
Page 1 of 9 ROMPA SUPA SPARKLE BUBBLE TUBE 20288 CONTENTS 1 x Base Unit (chassis) 1 x Base Cover (white plastic cover) 1 x Bubble Tube Column 1 x Power Supply (black box) (H)* 1 x Dust Protector Cover
More informationPressure Dump Valve Service Kit for Series 3000 Units
Instruction Sheet Pressure Dump Valve Service Kit for Series 000 Units. Overview The Nordson pressure dump valve is used to relieve hydraulic pressure instantly in Series 00, 400, 500, and 700 applicator
More informationCONFER IN-GROUND CURVE STEP / IN-GROUND CURVE STEP SYSTEM ASSEMBLY AND INSTALLATION MANUAL
SAVE THESE INSTRUCTIONS DEALER/INSTALLER: GIVE TO HOMEOWNER CONFER IN-GROUND CURVE STEP / IN-GROUND CURVE STEP SYSTEM ASSEMBLY AND INSTALLATION MANUAL Model CCX-IG Note: 40 lbs. of sand required! SAND
More informationSeptember 10, 2014 Revision 2. Puncher Unit-BE1/BF1/BG1/BH1 Service Manual
1 4 September 10, 014 Revision Puncher Unit-BE1/BF1/BG1/BH1 Service Manual 0 0- Application This manual has been issued by Canon Inc. for qualified persons to learn technical theory, installation, maintenance,
More informationMANTEL BIKE BOX: PACKING YOUR ROAD BIKE FOR TRANSPORT
MANTEL BIKE BOX: PACKING YOUR ROAD BIKE FOR TRANSPORT ROAD BIKE COMPONENTS 1 Frame: a b c d e Top tube Down tube Seat tube Chain stay Seat stay 2 Saddle 3 Seat post 4 Seat post clamp 5 Rear brake 6 Front
More informationSET-UP INSTRUCTIONS. Includes:» Lightning Strike with Ball Shagger Feeder» 6 Lightning Strike Balls» 6 Volt AC Adapter
SET-UP INSTRUCTIONS Includes:» Lightning Strike with Ball Shagger Feeder» 6 Lightning Strike Balls» 6 Volt AC Adapter BEFORE YOU BEGIN:» Make sure you have all of the Lightning Strike components. Please
More informationCONFER ABOVE GROUND CURVE STEP / ABOVE GROUND CURVE STEP SYSTEM ASSEMBLY AND INSTALLATION MANUAL
SAVE THESE INSTRUCTIONS DEALER/INSTALLER: GIVE TO HOMEOWNER CONFER ABOVE GROUND CURVE STEP / ABOVE GROUND CURVE STEP SYSTEM ASSEMBLY AND INSTALLATION MANUAL Model CCX-AG Note: 40 lbs. of sand required!
More informationNew product release. Universal Rebreather Monitor (URBM) Single O2 cell and Dual HP package
New product release Closed Circuit Research is pleased to announce the launch of our range of Universal Rebreather Monitors Key features and benefits include: Universal Rebreather Monitor (URBM) Single
More informationSetting Up the Ingenico isc250 Pinpad via USB
One Blue Hill Plaza, 16 th Floor, PO Box 1546 Pearl River, NY 10965 1-800-PC-AMERICA, 1-800-722-6374 (Voice) 845-920-0800 (Fax) 845-920-0880 Setting Up the Ingenico isc250 Pinpad via USB The following
More informationCONSUMER MODEL INSTALLATION GUIDE
CONSUMER MODEL INSTALLATION GUIDE System requirements Windows System Requirements To use your TOMI and its software, your system should have: A Microsoft Windows compatible PC with a Pentium IV processor
More informationPitchTracker User Guide. Model: DKPT01 User Guide
PitchTracker User Guide Model: DKPT01 User Guide PACKAGE CONTENTS What Comes in the Box USING YOUR SMART BALL Turn On Your Smart Ball Pair your Smart Ball Turn Off Your Smart Ball Charge your Smart Ball
More informationParts: Included in the parts box: Inner Rear Tire Tray. Inner Front Tire Tray. Trail Doc Clamp. Pivot Assembly. Trail Doc Post.
NV 2.0 2 Parts: Outer Front Tire Tray Inner Front Tire Tray Outer Rear Tire Tray Inner Rear Tire Tray Pivot Assembly Trail Doc Clamp Trail Doc Post Included in the parts box: 6mm Allen Wrench M6 Lock Washer
More informationApproach. S3 Owner s Manual. May _0B Printed in Taiwan
Approach S3 Owner s Manual May 2012 190-01467-00_0B Printed in Taiwan All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin.
More informationWELCOME TO THE FUTURE OF TELEVISION. User Manual
WELCOME TO THE FUTURE OF TELEVISION User Manual Welcome to BTV Each living room and family sharing our technology resonate our commitment to excellence. In our responsibility to offer the best products,
More informationHoldUp Plus2. Safety Kit included: See additional instructions for installation. REAR WHEEL TRAY. BASE (1x) lock WASHER (1x) KEY (2x) SAFETY CLIP (1x)
HoldUp Plus2 InsTAll This product on 2" hitch version of the HoldUp Front WHEEL TRAY assembly (1x) REAR WHEEL TRAY assembly (1x) wrench (1x) BASE (1x) bolt (8X) Lock WASHER (8X) Washer (8x) KEY (2x) SAFETY
More informationTo Purchase This Item, Visit BMI Gaming (800)
How to play the game How to play the game The object of the game is to reach the Game Goal before your opponent. HOW TO START: - A coin toss decides who starts the game. The winner of the coin toss also
More informationModular training weapon Owners manual
Modular training weapon Owners manual MTW Basic Features Thank you for joining the Wolverine family! We hope you will enjoy your new Modular Training Weapon. Please read the Owners Manual carefully before
More informationAdd 3-AA Batteries BASEBALL PEG
MLB Series Bat, Baseball, and Glove Pegs The MLB Series Laser Pegs kit includes the Bat, Baseball, and Glove Pegs. These shapes can be used with any other existing Laser Pegs kit. All three of the MLB
More information(PLEASE CONTACT YOUR LOCAL DEALER or CUSTOMER SERVICE FOR WARRANTY INFORMATION)
RUDDER KIT SOLO AND TANDEM KAYAKS IMPORTANT: For Tandem kayaks, the Supplemental Kit will be needed in addition to this kit and can be purchased through a registered dealer. The addition of a rudder to
More informationMounting the RoboFocus RF-3 Unit on the LX-200/400 MicroFocuser
Mounting the RoboFocus RF-3 Unit on the LX-200/400 MicroFocuser The RoboFocus unit can be mounted on the Meade MicroFocuser, commonly found on the LX-200/400 series. The RF folks point to this URL as a
More information(PLEASE CONTACT YOUR LOCAL DEALER or CUSTOMER SERVICE FOR WARRANTY INFORMATION)
RUDDER KIT SOLO KAYAKS IMPORTANT: Tandem models will require the Wildy Supplemental kit in addition to this kit. The Supplemental kit provides extension straps and extra footbraces that allow rudder positioning
More informationReach poles & cables system. product guide
Reach poles & cables system product guide Phantom Indoor Batting Cage reach poles & cables system This reach poles & cables system is engineered to maximize your interior space. This guide will walk you
More informationRead this first. Zetasizer nano series Self installation and Quick start guide MRK825-02
! Read this first Zetasizer nano series Self installation and Quick start guide I N S T R U M E N T S MRK825-02 Zetasizer Nano series Self installation and Quick start guide MAN0383 Issue 1.1 July 2007
More informationA-FRAME RESIN IN & OUT FLIP UP LADDER
A-FRAME RESIN IN & OUT FLIP UP LADDER NE1222 NOTE FOR SAFETY PURPOSES ALL LADDERS SHOULD BE SECURED BY ATTACHING THEM TO THE TOP LEDGE OF THE POOL. (See step 13 for details) In order for the ladder to
More information2019 MADONE ASSEMBLY MANUAL
2019 MADONE ASSEMBLY MANUAL 2019 MADONE Rim brakes and Di2 drivetrain Disc brakes and Di2 drivetrain Rim brakes and mechanical drivetrain Disc brakes and mechanical drivetrain TABLE OF CONTENTS Common
More informationPrime Splitboard System
Prime Splitboard System Assembly and Use Instructions Patented US8469372B2, US8733783B2 and Patents Pending Size Chart: Small: 6-8 Medium: 8.5-11 Large:11.5-13 Women's: W6-W8 2x Bindings (L and R) 2x Tour
More informationDrive Belt Instructions
Drive Belt Safety Do not roll, pry, twist, invert or bend the belt back on itself. Do not zip tie the belt. The acceptable temperature range for your belt drive is -53 C to 85 C. Do not lubricate the belt
More informationBASnet LightiView Install Guide
BASnet LightiView 1025 Cobb Place Blvd Suite 100 Kennesaw, GA 30144 800-241-9173 www.triateklighting.com ATTENTION This section serves as a notice of the immediate or potential dangers involved when working
More informationInstructions for Assembly, Installation, and Operation of the Gas Addition Kit Accessory with the CEM Discover Systems
Corporation Issued: 5/09 P/N: 600104 Rev. 2 Instructions for Assembly, Installation, and Operation of the Gas Addition Kit Accessory with the CEM Discover Systems The Gas Addition Accessory permits the
More informationMODEL CCX-AG CURVE STEP / CURVE STEP SYSTEM
To reduce the risk of drowning, entrapment, falls, paralysis, electrocution, or other serious injury or death: Dealer/Installer: Give manual to homeowner. Installer: Read "Safe Installation" on p. 2 and
More informationHPICAL Operation & Data Logging Procedures. Click spacebar to advance through slides 1
HPICAL-15000 Operation & Data Logging Procedures Click spacebar to advance through slides 1 WARNING Always wear proper safety equipment when using high pressure equipment. Do not exceed 125 psi air pressure.
More informationModel 6810A Dual Lane Scoreboard Owner s Manual Rev B
RACEAMERICA T i m i n g S y s t e m s Model 6810A Dual Lane Scoreboard Owner s Manual Rev B RACEAMERICA, Inc. P.O. Box 3469 Santa Clara, CA 95055-3469 (408) 988-6188 http://www.raceamerica.com info@raceamerica.com
More informationHOW-TO: Install a Wildcat Lighting System
Items needed: Acetone Isopropyl Alcohol Power Drill 8 zip ties Marine Goop 9/6 Drill Bit /6 Drill Bit Pencil or dry erase marker Measuring tape Extra wire Extra Grey Wire nuts Wire cutters Wire Strippers
More informationPROPORTIONING VALVE. Model 150 INSTRUCTION MANUAL. March 2017 IMS Company Stafford Road
PROPORTIONING VALVE Model 150 INSTRUCTION MANUAL March 2017 IMS Company 10373 Stafford Road Telephone: (440) 543-1615 Fax: (440) 543-1069 Email: sales@imscompany.com 1 Introduction IMS Company reserves
More informationGlove Box Installation Manual
Glove Box Installation Manual 1998 by M. Braun Company File: GB-UNI-INS.DOC! Edition 08-00 by M. Boutin! Subject to be changed without notice Glovebox Installation Your Glove box has been fully assembled,
More informationF1 Ace Sport 2-in-1 Baby walker
F1 Ace Sport 2-in-1 Baby walker INSTRUCTIONS: Read the instructions carefully before use and keep them for future reference. The child may be hurt if you do not follow these instructions. BS EN 1273:2005.
More information