VALVES ISO 5599/1, SERIES IPV-ISV
|
|
|
- Doreen Hopkins
- 5 years ago
- Views:
Transcription
1 VALVES ISO 99/1, SERIES IPV-ISV The assembly surface dimensions of ISO1 and ISO2 valves are to ISO99-1. They are available in the -way versions with 2 and 3 positions and with pneumatic or solenoid actuation. 2 TECHNICAL DATA Fluid Operating pressure: pilot-assisted Minimum pilot pressure Operating temperature range Nominal diameter Conductance C Critical ratio b Flow rate at 6 Bar ΔP 0. Bar Flow rate at 6 Bar ΔP 1 Bar Installation Assembly Recommended lubricant Solenoid pilot: Manual: Maximum torque nut/coil Compatibility with oils: ISO 1 ISO 2 Filtered air without lubrication; lubrication, if used, must be continuous Vacuum 10 bar pneumatic bar solenoid/pneumatic Vacuum 10 bar pneumatic 1 10 bar solenoid/pneumatic Vacuum 10 bar 2. bar C 7. mm 12 mm 20 Nl/min bar 67.1 Nl/min bar 0.36 bar/bar 0.2 bar/bar 700 Nl/min 100 Nl/min 1100 Nl/min 2700 Nl/min In any position (vertical assembly is not recommended for bistable valves subjected to vibration) On single and manifold bases according to ISO 99/1 ISO and UNI FD 22 to CNOMO / in-line pilot / M12 bistable on solenoid pilot monostable on valve body please refer to page 6.1/0 COMPONENTS VALVE BODY: Aluminium END CAP: HOSTAFORM SPOOL: chemically nickel-plated aluminium DISTANCE PLATES: plastic GASKETS: NBR nitrile rubber PISTONS: HOSTAFORM PISTON GASKETS: NBR nitrile rubber FILTER: sintered bronze SPRINGS: special steel OPERATOR: Brass pipe Stainless steel core 2.1/
2 FLOW CHARTS ISO 1 FLOW RATES (Nl/min) PRESSURE (bar) FLOW CHARTS ISO 2 FLOW RATES (Nl/min) PRESSURE (bar) KEY TO CODES I P V P N S O O FAMILY PORT FUNCTION OPERATORS 1 RESETTING 12 FURTHER DETAILS IPV ISV ISO pneumatic ISO solenoid/ pneumatic ISO 1 6 ISO 2 /2 6 /3 PN pneumatic SO solenoid/pneumatic SE electric pilot-assisted DO solenoid/pneumatic in line DE solenoid, assisted in line CO M12 solenoid/pneumatic CE M12 solenoid assisted S mechanical spring B bistable D differential OO /2 CC closed centres OC open centres PC pressure centres 2.1/6
3 VALVES ISO 99/1, PNEUMATIC SERIES IPV TECHNICAL DATA Operating pressure Minimum operation pressure: Operating temperature range Nominal diameter Conductance C Critical ratio b Flow rate at 6 Bar ΔP 0. Bar Flow rate at 6 Bar ΔP 1 Bar Response times at 6 Bar: Repositioning response times at 6 Bar: Manual ISO 1 ISO 2 Vacuum 10 bar 2. bar 1 bar -10 to 60 C 7. mm 12 mm 20 Nl/min bar 67.1 Nl/min bar 0.36 bar/bar 0.2 bar/bar 700 Nl/min 100 Nl/min 1100 Nl/min 2700 Nl/min 12 ms 2 ms 20 ms 30 ms 30 ms 3 ms 20 ms 30 ms monostable on valve body 2 PNEUMATIC ACTUATION ISO 1 IPV PNS OO IPV PNB OO IPV PND OO IPV 6 PNS CC IPV 6 PNS OC IPV 6 PNS PC PNEUMATIC ACTUATION ISO 2 IPV 6 PNS OO IPV 6 PNB OO 2010 ISO 99 Size 2 max 10 bar C IPV 6 PND OO M6 IPV 66 PNS CC IPV 66 PNS OC IPV 66 PNS PC /7
4 VALVES ISO 99/1, SOLENOID/PNEUMATIC, SERIES ISV TECHNICAL DATA Operating pressure: pilot-assisted Minimum pilot pressure Operating temperature range Nominal diameter Conductance C Critical ratio b Flow rate at 6 Bar ΔP 0. Bar Flow rate at 6 Bar ΔP 1 Bar TRA / TRR monostable at 6 Bar TRA / TRR bistable at 6 Bar Solenoid pilot: Manual: Coils: Maximum torque coil/nut ISO 1 ISO bar 1 10 bar Vacuum 10 bar 2. bar -10 to 60 C 7. mm 12 mm 20 Nl/min bar 67.1 Nl/min bar 0.36 bar/bar 0.2 bar/bar 700 Nl/min 100 Nl/min 1100 Nl/min 2700 Nl/min 2 ms / 0 ms 39 ms / 60 ms 20 ms / 20 ms 2 ms / 2 ms Standards CNOMO bistable on solenoid pilot monostable on valve body 30mm side DIN 360 Form A ISO 22 mm side MONOSTABLE /2 ISO ISV SOS OO ISV SES OO MONOSTABLE /2 ISO 2 16 ISV 6 SOS OO ISV 6 SES OO ISO 99 Size 2 max 10 bar C M /
5 BISTABLE /2 ISO 1 MONOSTABLE /3 ISO 1 ISV SOB OO ISV SOD OO ISV 6 SOS CC ISV 6 SOS OC ISV 6 SOS PC ISV SEB OO ISV SED OO ISV 6 SES CC ISV 6 SES OC ISV 6 SES PC BISTABLE /2 ISO 2 MONOSTABLE /3 ISO 2 ISV 6 SOB OO ISV 6 SOD OO ISV 66 SOS CC ISV 66 SOS OC ISO 99 Size 2 max 10 bar C M6 10 ISV 66 SOS PC ISV 6 SEB OO ISV 6 SED OO ISV 66 SES CC ISV 66 SES OC ISV 66 SES PC /9
6 VALVES ISO 99/1, PNEUMATIC, SERIES ISV WITH IN-LINE SOLENOID PILOT TECHNICAL DATA Operating pressure: pilot-assisted Minimum pilot pressure Operating temperature range Nominal diameter Conductance C Critical ratio b Flow rate at 6 Bar ΔP 0. Bar Flow rate at 6 Bar ΔP 1 Bar TRA / TRR monostable at 6 Bar TRA / TRR bistable at 6 Bar Solenoid pilot: Manual: Coils: Maximum torque coil/nut ISO bar 1-10 bar Vacuum 10 bar 2. bar -10 to 60 C 7. mm 20 Nl/min bar 0.36 bar/bar 700 Nl/min 1100 Nl/min 2 ms / 0 ms 2 ms / 2 ms In line pilot bistable on solenoid pilot 30mm side DIN 360 Form A ISO 22 mm side MONOSTABLE /2 ISO ISV DOS OO ISV DES OO BISTABLE /2 ISO ISV DOB OO ISV DEB OO /60
7 MONOSTABLE /3 ISO ISV 6 DOS CC ISV 6 DOS OC ISV 6 DOS PC ISV 6 DES CC ISV 6 DES OC ISV 6 DES PC NOTES 2.1/61
8 COILS AND CONNECTORS FOR ISO 99/1 SOLENOID VALVES SERIES ISV COILS SIDE 22 mm FOR ISO 99/1 SOLENOID VALVES ø.2 M ø Voltage tolerance: -10% + 1% Insulation class: F1 Degree of protection: IP6 EN6029 with connector Avoid prolonged exposure to the atmospheric agents Coil temperature 100% ED: 70 C at 20 C Ambient temperature According to Atex 9/9 CE rule, group 2, category 3 GD Nominal voltage Absorption Inrush Holding 12Vcc 2Vcc 2V 0/60Hz 110V 0/60Hz 220V 0/60Hz 2W 2W.3VA.3VA.3VA 2W 2W 3.VA 3.VA 3.VA Coil 22 Ø BA 2W-12VDC Coil 22 Ø BA 2W-2VDC Coil 22 Ø BA 3.VA-2VAC Coil 22 Ø BA 3.VA-110VAC Coil 22 Ø BA 3.VA-220VAC W W W W W COILS SIDE 30 mm ø16 ø16.3 ø M3 1 electric contact DIN360 shape A ISO 0 Voltage tolerance: -10% + 10% Insulation class: F1 Degree of protection: IP6 EN6029 with connector Avoid prolonged exposure to the atmospheric agents According to Atex 9/9 CE rule, group 2, category 3 GD Nominal voltage Absorption Inrush Holding 2Vcc 2V 0/60Hz 110V 0/60Hz 220V 0/60Hz W 10VA 10VA 10VA W VA VA VA Coil 30 Ø W-2VDC Coil 30 Ø VA-2VAC Coil 30 Ø VA-110VAC Coil 30 Ø VA-220VAC W W W W CONNECTOR FOR COILS SIDE 22 mm ~31 M3 1. ~2 ~ 6. Pg Colour Black Ø Cable Type Standard LED 2V LED 110V LED 220V LED + VDR 2V LED + VDR 110V LED + VDR 220V W W W W W W W CONNECTOR FOR COILS SIDE 30 mm ~30. M3 1. ~27 ~9 2 9 Pg9 2 1 Colour Black Ø Cable Type Standard LED 2V LED 110V LED 220V LED + VDR 2V LED + VDR 110V LED + VDR 220V W W W W W W W KIT COIL EEXM ø.2 ø Description KIT FOR COIL 30 2 VDC EEXMT CABLE 3M KIT FOR COIL 30 2 VDC EEXMT CABLE M KIT FOR COIL 30 2 VAC EEXMT CABLE 3M KIT FOR COIL 30 2 VAC EEXMT CABLE M KIT FOR COIL VAC EEXMT CABLE 3M KIT FOR COIL VAC EEXMT CABLE M KIT FOR COIL VAC EEXMT CABLE 3M KIT FOR COIL VAC EEXMT CABLE M according to Atex 9/9 CE rule, group 2, category 2 GD KIT COILS SIDE 22 IP6 2.1/62 Description KIT FOR COILS 22 - IP6 Improved IP6 protection, even after prolonged exposure to atmospheric agents. Applicable to valves with a technopolymer control.
SOLENOID VALVES AND PNEUMATIC VALVES
9 S E R I E S Electropneumatically and pneumatically operated valves Series 9 Assembly with sub-base (ISO 5599/1 Standards) Sizes 1, 2 and 3 The Series 9 electropneumatically or pneumatically operated
filtered air without lubricant. If lubricated air is used, it is recommended to use ISOVG32 oil and to never interrupt lubrication.
> Series EN valves and solenoid valves Valves and Solenoid valves Series EN, CC - CO - CP With outlets on the body - For individual or manifold assembly Size 16-19 mm» Mounting on any flat surface» Reduced
Valves ISO 5599/1 ISO 1, 5/2-5/3, electrically operated, with CNOMO pilot
ISO 1, - 5/3, electrically operated, with CNOMO pilot Executions 0300 ISO1E50 NOTE: FOR VALVES WITH PILOT IN LINE SEE PAGE.111.1 Technical data 03030 ISO1E51 03037 ISO1E5 03031 ISO1E70 0303 ISO1E71 03043
SOLENOID VALVES AND PNEUMATIC VALVES
S E R I E S 3 4 2 Electropneumatically operated valves Series 3 and 4 Series 3: G1/8, 3/2 - way and 5/2 - way Series 4: G1/8, G1/4 and G1/2 3/2, 5/2 and 5/3 - way GENERAL DATA Construction Valve group
Valves series A1 1/2, 3/2, electrically operated
1/, 3/, electrically operated Executions 3/ NC 0113 A1E430 3/ NO 3 0 A1E431 1 3 3/ 03 A1E43 3/ NC 3/, 0137 A1K430 08 A1K43 Series of spool valves, with static seals, high flow, for panel mounting. Coils
MV-01. Features. 2/2-way Solenoid Valve for Fluids. Description: Application:
MV-01 2/2-way Solenoid Valve for Fluids Description: Features / Nominal diameters 1/4-2 / Pressure up to 10 bar / 24 V DC and all common AC variants / Forced-lifting The pilot-controlled full-way valve
Pneumatic valve islands
Pneumatic valve islands The MEGA solenoid air operated spool valve JOUCOMATIC offers a concept of solenoid air operated spool valves which can be fitted together to form islands. Due to its new patented
Spool compact valves pilot and solenoid actuated G 1/8 - G 1/4
Spool compact valves pilot and solenoid actuated G 1/8 - G 1/4 DESCRIPTION Valves series "MEK", in the 5/ and pneumatic functions, have been realized with compact overall dimensions yet assuring high flow.
series UDS ISO to ISO 5599/1 standard pilot and solenoid actuated sizes DESCRIPTION TECHNICAL DATA MATERIALS SPARE PARTS
series UDS ISO Valves to ISO 5599/1 standard pilot and solenoid actuated sizes 1 - - 3 DESCRIPTION Valves series UDS ISO are produced in the and functions according to the interface to ISO 5599/1 standard
4/2 way Pneumatic Solenoid Valve
4/2 way Pneumatic Solenoid Valve Compact design Push-over solenoid coil Exhaust air can be regulated Tube, threaded and sub-base connections Type combined with Seat valve version Type 2508 Type 2510/11
Valves to ISO 5599/1 standards pilot and solenoid actuated size
Series UDS ISO pilot and solenoid actuated size 1 - - 3 DESCRIPTION Valves series "UDS ISO" are produced in the and pneumatic functions according to the interface to ISO 5599/1 standards and they are mounted
seriesek Spool valves pilot and solenoid actuated G 1/8 - G 1/4 - G 1/2 DESCRIPTION Spool valves series EK 2.43 MATERIALS TECHNICAL DATA SPARE PARTS
Spool valves pilot and solenoid actuated G 1/8 - G 1/4 - G 1/ DESCRIPTION Valves series "EK" are produced in the 3/, 5/ and pneumatic functions. The piloting solenoid valve can be assembled perpendicular
Series 4 Cv= Air-Pilot operated valves. 3-way/2-position, 5-way/2-position, 5-way/3-position
3 Cv =.73-2.00 Series 4 Cv=.73-2.00 Air-Pilot operated valves Series 4: 1/8,, 3-way/2-position; 5-way/2-position; 5-way/3-position 1/2 5-way/2-position The pneumatically operated,3-way/2-position, 5-way/2-position
seriesuds ISO Valves to ISO 5599/1 standard
seriesuds ISO Valves to ISO 5599/1 standard pilot and solenoid actuated sizes 1 - - 3 DESCRIPTION Valves series UDS ISO are produced in the and pneumatic functions according to the interface to ISO 5599/1
MECAIR CSN RAINTIGHT ENCLOSURE CLEAN AIR SOLUTIONS PRODUCT LEAFLET
CSN RAINTIGHT ENCLOSURE CLEAN AIR SOLUTIONS GENERAL CHARACTERISTICS CONSTRUCTION FEATURES ENCLOSURE OPERATING TEMPERATURE 20 C/+60 C COVER Diecast aluminium (anodised) WEIGHT CSN 5 3.5 kg CSN 8 5 kg CSN
Series 1, 3 and 4 Cv = /8" and 1/4" Ported Manually Operated Valves. 3-way/2-position, 5-way/2-position, 5-way/3position
Cv =.52 -.73 Series, 3 and 4 Cv =.52.3 /8" and /4" Ported Manually Operated Valves 3-way/2-position, 5-way/2-position and 5-way/3-position Ports /8 and /4" NPTF The Series (/8 & /4", 3-way/2-position and
Pneumatic spool valve islands
Pneumatic spool valve islands P7.GB.R MEGA SPOOL VALVE ISLANDS MEGA pneumatic spool valve islands offer maximum performance along with flexibility, easy installation and simple operation. Due to their
TECHNICAL CHARACTERSTICS
and solenoid valves spool version GM - GL series Type of valves with dorsal consumption: GM-...series with integrated connections GL-...series without connections TECHNICAL CHARACTERSTICS Ambient temperature:
MATERIALS SPARE PARTS. iting pressure (b. Spool compact valves series MEK
Spool compact valves pilot and solenoid actuated G 1/8 - G 1/4 Valves series "MEK", in trie and pneumatic functions, have been realized with compact overall dimensions yet assuring high flow. The kind
SPCH/ Blowing block
> > for linear stretch blow moulding machines > > Compact and safe design > > Best suited for PET bottles up to litres, depending on cycle time Technical features Medium: Compressed air (purity class 3..3
Vannes à levier de commande Manually actuated valves
Vannes à levier de commande Distributeurs /-/-/ à raccordement G/8 -G/ -G/8 -G/ /-/-/ spool valves with G/8 -G/ -G/8 -G/ threaded ports Installation dans toutes les positions Installation in any position
Solenoid valves VZWF, force pilot operated
Key features and overview Function Normally closed solenoid valve with diaphragm and forced lifting. When the solenoid is energised, the differential pressure from the secondary side of the diaphragm is
SPOOL VALVES. pilot operated single/dual solenoid (mono/bistable function) ISO mm - pad mounting body M12 connection
SPOOL VALVES pilot operated single/dual solenoid (mono/bistable function) ISO 07-8 mm - pad mounting body M connection x/ - / - / Series 0 ISO 07- (8 mm) FEATURES M connection on top of valve: reduces
Nugget 120 V14 Series
Nugget 0 V Series /2 & /3 Valves Solenoid and Pilot Operated G 1 4 High flow compact valves Sub-base and low profile manifolds Light weight, long life corrosion resistant materials Multipole and Fieldbus
Complementary valves: shuttle, quick exhaust and check valves
Complementary valves shuttle, quick exhaust and check valves Complementary valves are very important components of the pneumatic circuits. This group includes the: SHUTTLE VALVES: these valves are used
FEPA PNEUMATICALLY AND SOLENOID ACTUATED VALVES, ONE UNIT MOUNTED TYPE VPG
PNEUMATICALLY AND SOLENOID ACTUATED VALVES, ONE UNIT MOUNTED TYPE VPG TECHNICAL CHARACTERISTICS Number of ways / positions : 3/2, 3/3, 5/2, 5/3, 5/4 Nominal sizes (ND) : 4, 6, 9, 12 Medium : compressed
Nugget 120 V14 Series
Nugget 0 V Series /2 & /3 Valves Solenoid and Pilot Operated G 1 4 High flow compact valves Sub-base and low profile manifolds Light weight, long life corrosion resistant materials Multipole and Fieldbus
Distributeurs commande manuelle à levier
Distributeurs commande manuelle à levier Lever actuated valves Informations générales General information Distributeurs 3/2-5/2-5/3 à raccordements - G1/4 - G3/8 - G1/2 - G3/4 3/2-5/2-5/3 spool valves
Valves, manually operated
Valves, manually operated Valves, manually operated Key features VHEM-P K/O-3-PK-3 H-3-¼-B KH/O-3-PK3 TH/O-3-PK3 F-3-¼-B Innovative Versatile Reliable Easy to mount Small and compact for a wide range of
Valves, manually operated
Valves, manually operated Valves, manually operated Key features VHEM-P K/O-3-PK-3 H-3-¼-B KH/O-3-PK3 TH/O-3-PK3 VHEM-L F-3-¼-B Innovative Versatile Reliable Easy to mount Small and compact for a wide
Position switches FP series
A Position switches FP series Selection diagram 0 08 8 9 0 0 0 Ø 8 mm Ø, mm external rubber stainless steel stainless steel fiber glass rod gasket sphere sphere adjustable lever safety adjustable lever
Intrinsically safe solenoid valves on/off controls - ATEX certification
www.atos.com Table E130-17/E Intrinsically safe solenoid valves on/off controls - ATEX certification valve body valve spool intrinsically safe solenoid electrical connector manual override DHW-0611/WP/6
Pilot Check Valve: Metal Body Type
INFORMATION Pilot Check Valve: Metal Body Type The use of a metal body improves strength and environmental resistance. Temporary intermediate stops are possible. *1 *1 Precise intermediate stops are not
SPOOL VALVES. ISO 15407/1 - Sizes Series PA568-GB-R3. All leafl ets available at:
SPOOL VLVS ISO 07/ - Sizes 0-0 Series 8-9 P68-GB-R ll leafl ets available at: www.ascojoucomatic.com FTURS These spool valves which comply with the VDM 6 standard offer the advantage of being smaller than
MULTIPOL - VDMA. PNEUMATIC SPOOL VALVE ISLANDS VDMA ISO 02 - ISO 01 (G1/8 - G1/4) designed for connection to a PLC by multiwire cable
P8.G.R PEUATIC SPOOL VALVE ISLADS VDA - ISO - ISO (G/8 - G/) designed for connection to a PLC by multiwire cable ULTIPOL - VDA IPUT IPUT OUTPUT OUTPUT OUTPUT IPUT IPUT ULTIPOL - VDA Pneumatic spool valve
EVRM-NC EVRM-6NC. delta-elektrogas.com. Safety solenoid valves for gas Manual reset - Normally closed DN10 DN300.
EVRM-NC EVRM-6NC Safety solenoid valves for gas Manual reset - Normally closed DN10 DN300 delta-elektrogas.com www.solenoid-valve.world EE166-03/17 EVRM-NC EVRM-6NC Safety solenoid valves for gas Manual
2/2- and 3/2-way Rocker Solenoid Valve - bistable (impulse) version
2/2- and 3/2-way Rocker Solenoid Valve - bistable (impulse) version Type 6624 Impulse can be combined with... 10mm width orifice DN 0.8 to 1.2 with pressure range vacuum to 5bar medium separation, for
Gas Pressure Regulator HON 502
Gas Pressure Regulator HON 502 Product information serving the gas industry worldwide Gas Pressure regulator HON 502 Application, Characteristics, Technical Data Application for offtake stations in gas
Pressure switch and Thermostat CAS
Data sheet Pressure switch and Thermostat CAS The CAS Series consists of a series of pressure controlled switches and temperature controlled switches. In this series, special attention has been given to
Inverse Proportional Pressure-Relief Cart., Size 2 4
Inverse Proportional Pressure-Relief Cart., Size Q max = l/min, p max = 5 bar Direct acting, electrically operated 1 Description inverse proportional pressure-relief valves are direct acting screw-in cartridges
Electrically Operated Pressure-Relief Cartridge, Size 10
Electrically Operated Pressure-Relief Cartridge, Size 1 Q max = 14 l/min (37 gpm), p max = bar (5 psi) seated pilot stage, spool-type design, with remote contral port Z Series WUVPOC-2, WUVPLC-2 1 Description
V83 series Redundant valve manifold systems - Modular with bypass 1oo2 Safety, 2oo2 Availability and 2oo3 Safety and Availability
V8 series Redundant valve manifold systems - Modular with bypass oo Safety, oo Availability and oo Safety and Availability > > Modular design - Maxseal valves > > able terminations inside coil housing
The Limit Switch with Better Seal, Shock Resistance, and Strength. General-purpose Limit Switch. Model Number Structure
General-purpose Limit Switch CSM_DA-_N_DS_E The Limit Switch with Better Seal, Shock Resistance, and Strength A double seal on the head, a complete gasket cover, and other features ensure a better seal
MULTIFUNCTIONAL CONTROL FOR GAS BURNING APPLIANCE
SIT Group SIT -3- SIGMA MULTIFUNCTIONAL CONTROL FOR GAS BURNING APPLIANCE 9.955. Subject to change without notice Application Domestic gas appliances: central heating boilers, combi boilers, instantaneous
AIR WORK ISO 5599/1 VALVES - SIZE 1 AND 2 VALVE ISO 5599/1 TAILLE 1 E 2 / VALVOLE ISO 5599/1 TAGLIA 1 E
ISO 55/1 VALVES - SIZE 1 AND VALVE ISO 55/1 TAILLE 1 E VALVOLE ISO 55/1 TAGLIA 1 E The VI Series complies with ISO 55/1 norms. They are entirely made in aluminium in order to grant strength and long durability.
4 qwer 2/2 3/2 4/2. Intrinsically Safe. Air and Inert Gas Intrinsically Safe Valves Brass, or Stainless Steel Bodies 1/4" to 1" NPT SERIES.
qwer Air and Inert Gas Valves Brass, or Stainless Steel Bodies 1/" to 1" NPT Features Designed solely for installation in intrinsically safe areas, with properly approved and sized current and voltage-limiting
Dual Modular Safety Shutoff Valves DMV-D 525/11 DMV-DLE 525/11
Dual Modular Safety Shutoff Valves DMV-D 525/11 DMV-DLE 525/11 Two normally closed safety shutoff valves in one housing; each with the following approvals. CSA Certified ANSI Z21.21 CSA 6.5 Marked C/I
Valvex Valves for Mining Applications
Valvex Valves for Mining pplications roven technology The Electronic Drive Systems product group at Voith Turbo GmbH & Co. KG develops and produces explosion-proof Valvex solenoid valves and valve assemblies.
TANDEM MODULATOR FOR OUTLET GAS FLOW: STEPPED (836 TANDEM) - CONTINUOUS (837 TANDEM) SERVO-CONTROLLED PRESSURE REGULATOR
SIT Group 836-837 TANDEM MULTIFUNCTIONAL GAS CONTROL MODULATOR FOR OUTLET GAS FLOW: STEPPED (836 TANDEM) - CONTINUOUS (837 TANDEM) SERVO-CONTROLLED PRESSURE REGULATOR ALL ADJUSTMENTS ACCESSIBLE FROM ABOVE
VMR VMR-OTN VMR 6 bar
VMR VMR-OTN VMR 6 bar Safety solenoid valves for gas Fast opening and fast closing type DN8 DN150 delta-elektrogas.com EE161-03/17 VMR VMR-OTN VMR 6 bar Safety solenoid valves for gas Fast opening and
Proportional Pressure-Relief Cartridge Valve, Size 2...4
Proportional Pressure-Relief Cartridge Valve, Size... Q max = l/min, p max = 3 bar Direct acting, electrically operated 1 Description proportional pressure-relief valves are direct acting screw-in cartridges
PSG 901. Pressure Switch for Gas. elektrogas.com EE141-07/12
PSG 901 Pressure Switch for Gas elektrogas.com EE141-07/12 PSG 901 Pressure Switch for Gas (EN1854) Contents Description... 2 Features... 2 Functioning and application... 3 Technical specifications...
![[Instruments for vacuum measurement, checking and adjustment] 3](/thumbs/94/121874202.jpg "[Instruments for vacuum measurement, checking and adjustment] 3")
Inverse Proportional Pressure-Relief Cart., Size 2 4
Inverse Proportional Pressure-Relief Cart., Size Q max = l/min, p max = 35 bar Direct acting, electrically operated Description Compact construction for cavity type AL 3/-6 UNF Operated by a proportional
3-Way Safety Block DSV
3-Way Safety Block DSV DSV 10 - M DSV 10 - M - T-ball DSV 10 - EY 1. Description 1.1. GENERAL The 3-way safety block is used to shut off and discharge hydraulic accumulators or consumers. It complies with
G1/8 G1/8. Model 0 bar -0,1 bar -0,2 bar -0,3 bar -0,4 bar -0,5 bar -0,6 bar -0,7 bar -0,8 bar
single stage pumps M/5811 Very high induced air capacity % lower air consumption than comparable single stage units No wearing parts Compatible with a wide range of line contaminants llows direct connection
Prop. 3-Way Pressure-Reducing Cart., Size 5 / SAE 08
Prop. -Way Pressure-Reducing Cart., Size / SAE 8 Q max = 1 l/min (4 gpm), p max = bar (6 psi) Direct acting, electrically operated 1 Description proportional -way pressure-reducing cartridges are size
R133 HELYON. Brass high pressure regulator, suitable for compressed air, gas and liquid
R133 Brass high pressure regulator, suitable for compressed air, gas and liquid HELYON 5 Chemin du Jubin 6957 DARDILLY Tél. +33 () 7 5 16 7 - Fax +33 () 7 5 16 71 FEATURES High pressure regulator for cylinder
D e s c r i p t i o n
MPS Series D e s c r i p t i o n The MPS spin-on filter series is a complete product range suitable, for both suction and return applications. Utilising spin-on canisters, the MPS series are quick and
GasBloc Multifunctional gas control Combined regulator and safety shut-off valves Integrated gas-air system GB-GD 057 D01
Gasloc Multifunctional gas control Combined regulator and safety shut-off valves Integrated gas-air system G-GD 057 D01 Zero pressure regulator G-ND 057 D01 3.12 Technical description Multifunctional gas
Dual Modular Safety Shutoff Valves DMV-D 525/11 DMV-DLE 525/11
Dual Modular Safety Shutoff Valves DMV-D 525/11 DMV-DLE 525/11 Two normally closed safety shutoff valves in one housing; each with the following approvals. CSA Certified ANSI Z21.21 CSA 6.5 Marked C/I
OPTIBAR P 1010 C Technical Datasheet
Technical Datasheet Pressure transmitter with recessed diaphragm for general applications Wide variety thanks to modular design Measuring ranges up to 250 bar / 3750 psi High overload and temperature stability
ALUMINIUM TANK AND COMPENSATOR - SERIES 09
ALUMINIUM TANK AND Series 09 has been extended with the addition of an air/oil compensator. The Ø100 air/oil compensator consists of two aluminium flanges and an anodized jacket with an ISO profile, all
Safety and Shut-off Block SAF/DSV
1. DESCRIPTION 1.1. GENERAL The HYDAC safety and shut-off block is used to shut off and discharge hydraulic accumulators or user units. It complies with the relevant safety standards in accordance with
1 LS unloading (control valve, orifice, none) 2 LS max pressure relief. 3 Spool type
Flow Control Valve Series LVM.. high flow rates (8 l/min) flow rates are unaffected by temperature change or when the higher load pressure alternates between the outlet ports proportional flow-sharing
GM-7000 Series CE Approved Gas Control Valve
Installation Instructions GM-7000 Issue Date November 9, 2012 GM-7000 Series CE Approved Gas Control Valve Installation IMPORTANT: These instructions are intended as a guide for qualified personnel installing
Dual Modular Safety Shutoff Valves. DMV-D/602 Series DMV-DLE/602 Series
Dual Modular Safety Shutoff Valves DMV-D/602 Series DMV-DLE/602 Series Two normally closed safety shutoff valves in one housing; each with the following approvals. UL Recognized UL 429 File # MH16727 CSA
Magnetic level switch type MR783 Instruction Manual
Magnetic level switch Magnetic level switch type MR783 1. DESCRIPTION page 3 1.1 Operation page 3 1.2 Application page 3 1.3 Description page 3 2. SPECIFICATIONS page 3 2.1 Service Conditions page 4 2.2
UNIK 5600/5700 Marine Certified Pressure Sensing Platform
GE Measurement & Control UNIK 5600/5700 Marine Certified Pressure Sensing Platform The new UNIK 5600/5700 carries marine certification for most zones on-board ship, as well as Intrinsically Safe certifications.
Flow control valves Series RFU - RFO 2/
CATALOGUE > Release 8.5 > Valves Series RFU - RFO Flow control valves Series RFU - RFO Unidirectional and bidirectional flow control valves Ports: M5, G1/8, G1/4, G3/8 and G1/ Nominal diameter: M5 = 1,5
Proportional Pressure-Relief Cartridge Valve, Size 2...4
Proportional Pressure-Relief Cartridge Valve, Size... Q max = l/min (6 gpm), p max = bar (58 psi) Direct acting, electrically operated Description proportional pressure-relief valves are direct acting
II 2G EEx ia IIC T6. Ignition protection class
ATEX General information According to 94/9/EC, a device that is to be used in an environment at risk of explosion may only be brought into the market if it satisfies the standards specified in the norm.
2/2-Way Solenoid Control Valve
2/2-Way Solenoid Control Valve Excellent range (1:200) Very good response Compact valve design Orifice sizes 0.05... 2.0 mm Port connection 1/8 or sub-base Type 2871 can be combined with Type 8605 Digital
Prewired position switches FA series
2 Prewired position switches FA series Selection diagram 01 08 10 11 1 15 1 02 external rubber gasket external rubber gasket 1 51 52 54 55 56 5 ACTUATORS adjustable lever safety adjustable lever 41 45
Slam Shut Valves SCN
Slam Shut Valves SCN SCN > Slam shut valves Introduction SCN is a compact safety device (SAV) which quickly intercept gas flow whenever the pressure under monitoring reaches a pre-set limits, or whenever
Single and double acting, magnetic, self-centering Bores: ø 16, 20, 25, 32, 40 mm
> Series CGPT self-centering parallel grippers with T-guide Series CGPT self-centering parallel grippers with T-guide Single and double acting, magnetic, self-centering Bores: ø 6, 20, 25, 32, 40 mm New
Inverse Proportional Pressure-Relief Cartridge, Size 10
Inverse Proportional Pressure-Relief Cartridge, Size 1 Q max = 12 l/min, p max = 3 bar Seated pilot, spool-type main stage, damped design 1 Description inverse-proportional pressure-relief valves are size
Dual Modular Safety Shutoff Valves. DMV-D/602 Series DMV-DLE/602 Series
Dual Modular Safety Shutoff Valves DMV-D/602 Series DMV-DLE/602 Series Two normally closed safety shutoff valves in one housing; each with the following approvals. UL Recognized UL 429 File # MH16727 CSA
Inverse Prop. Pressure-Relief Cart., Size 2 4
Inverse Prop. Pressure-Relief Cart., Size Q max = l/min (6 gpm), p max = bar (58 psi) Direct acting, electrically operated Description inverse proportional pressure-relief valves are direct acting screw-in
Precision pressure regulators LRP/LRPS
Precision pressure regulators LRP/LRPS q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement
VSD03M DIRECTIONAL CONTROL VALVES
NFPA SIZE D03 TYPICAL PERFORMANCE SPECIFICATIONS Performance is measured on a four-way circuit (full circuit). Performance may e reduced from that shown if a three-way circuit (half circuit) is used, i.e.
safety Shut-Off Valve HON 721
safety Shut-Off Valve HON 7 product information serving the gas industry worldwide safety shut-off valve HON 7 safety shut-off valve HON 7 Application, Characteristics, Technical Data Application safety
HEAVY DUTY KNIFE GATE VALVE
HEAVY DUTY KNIFE GATE VALVE The (SER.22) model knife gate is a bi-directional lug type valve designed according to MSS-SP-81 and TAPPI TIS 405-8 for industrial service applications. The completely new
Proportional Throttle Cartridges, Size 16
Proportional Throttle Cartridges, Size 16 Q max = 5 l/min, p max = 5 bar, Q N max = 14 l/min at p 1 bar Two-Stage, with Seat-Valve Shut-Off 1 Description Normally closed Seat-valve shut-off from 1 Compact
CALEFFI. Ball zone valves. series /03 GB
all zone valves series cert. n ISO / Function Zone valves are used to automatically shut-off the flow of carrier fluid distributed to a system. Specifically: -In central heating systems, they support the
Dual Modular Safety Shutoff Valve with NEMA 4x Enclosure. DMV-D/604L Series DMV-DLE/604L Series
Dual Modular Safety Shutoff Valve with NEMA 4x Enclosure DMV-D/604L Series DMV-DLE/604L Series Two normally closed automatic shutoff valves in one housing; each with the following approvals. UL Listed
Dual Modular Safety Shutoff Valves. DMV-D/11 Series DMV-DLE/11 Series
Dual Modular Safety Shutoff Valves DMV-D/11 Series DMV-DLE/11 Series Two normally closed safety shutoff valves in one housing; each with the following approvals. CSA Certified ANSI Z21.21 CSA 6.5 Marked
WhirlWind Multifunctional gas control Fully integrated gas-air system with control and safety function GB-WND 055 D01
WhirlWind Multifunctional gas control Fully integrated gas-air system with control and safety function Printed in Germany Edition 01 1 6 Technical Description Integrated gas-air system with high power
Pressure transmitters EMP 2
Data sheet Pressure transmitters EMP 2 The high accuracy pressure transmitter EMP 2 is designed for monitoring and control in marine and industial applications and offers a reliable pressure measurement,
Solenoid valve type EVR for Hydrocarbons
MAKING MODERN LIVING POSSIBLE Technical brochure Solenoid valve type EVR for Hydrocarbons EVR for Hydrocarbons is a direct or servo operated solenoid valve especially designed for liquid, suction, and
Glass tube flowmeters Series 2000 Variable area flowmeter for low flows of liquids and gases
Glass tube flowmeters Series 2000 Variable area flowmeter for low flows of liquids and gases Short mounting length and compact construction, especially indicated for control panels Easy installation. No
BTV. Internally threaded 2-way control valve. Flow characteristics. Function
Internally threaded 2-way control valve The valves are designed for control of hot, cold or glycol-mixed water in heating and ventilation systems. They are pressure balanced (from DN20-50, not DN15) and
Gas Pressure Switch for DMV safety shutoff valves
Gas Switch for DMV safety shutoff valves GAO-A GMH-A GML-A UL Listed UL 353 File # MH 1668 CSA Certified CSA C. No. LR 53 File # 0157 FM Approved Class 3510, 3530 File # J.I. 1Y9A9.AF Commonwealth of Massachusetts
Dual Modular Safety Shutoff Valves with Proof of Closure. DMV-D/622 Series DMV-DLE/622 Series
Dual Modular Safety Shutoff Valves with Proof of Closure DMV-D/622 Series DMV-DLE/622 Series Two normally closed automatic shutoff valves in one housing. Valve 2 (V2) incorporates proof of closure. Each
Glass tube flowmeters Series 2000
Glass tube flowmeters Series 2000 Variable area flowmeter for low flows of liquids and gases Short mounting length and compact construction, especially indicated for control panels Easy installation. No
Desde1963. Válvulas Pilotadas. Proveedor Integral. la Industria
esde96 Válvulas Pilotadas Proveedor Integral de Por Soluciones Aire para la Industria Otras válvulas de proceso Cuerpos de Bronce, hierro fundido y conexión bridada, para completar la gama de soluciones.
Specifications. Model VEX Operating style Fluid Proof pressure Max. operating pressure
Power Valve Regulator Valve Series 1 Large Capacity Relief Regulator 3 port large capacity poppet exhausting regulator equipped with a relief port the same size as the connection port. Specifications Model
Series CGCN self-centering three-jaw grippers with T-guide
HANDLING AND VACUUM 2019 GRIPPERS > Series CGCN self-centering three-jaw grippers with T-guide New Double acting, magnetic Sizes: 50, 64, 80, 100, 125 mm The new Series CGCN pneumatic grippers are available
BW0500AO. ByWire Elements BW0500AO Element 4/3 with side ports IBW0500 Interface
ywire Elements Element 4/3 with side ports IW5 Interface efore use, carefully read the GENERL INSTRUCTIONS FOR USE OF DIRECTIONL CONTROL VLVES 398SW5EN - 5--8 Technical data Nominal flow 5 l/min 3. US
RA-N radiator valves with integrated presetting and self-sealing tailpiece
Data sheet RA-N radiator valves with integrated presetting and self-sealing tailpiece EN 215 Application Straight version Angle version Horizontal angle version All RA-N valve bodies can be used together