Safety Edges Safedge Profiles Specifications

Size: px

Start display at page:

Download "Safety Edges Safedge Profiles Specifications"

Lorena Marlene Grant
5 years ago
Views:

1 Presence Sensing Safety evices Specifications The ability of the Safedge profile to out perform competition lies in its innovative design. It uses a combination of non conductive rubber and flexible wire cored conductive rubber bonded together so it keeps bouncing back into shape even after repeated compressions. The Safedge profiles come in 3 different cushions factors: 5mm (0.2in), 19mm (0.75in) and 41mm (1.6in). ushion factor is the distance the profile can be depressed after a signal has been generated. The profiles are also offered with a sealing lip which is designed to reduce drafts between the profile and opposing surface. The profiles come in two different materials. Use the P material in the presence of conductive fluids. The R/R material performs better in the presence of oils. Review the chemical resistance chart to help make the best choice of material. If in doubt, a small sample of the profile should be tested for chemical resistance before a final selection is made. The Safedge profile has no rigid internal parts which can break through or cause fatigue failures after prolonged use. The multistranded copper wire core throughout the length of the strip insures that there are no problems of resistance build up on long lengths. eatures Various profiles onductive rubber technology Up to 50m lengths luminium, plastic or zinc coated steel, mounting rails Rubber boot optional ctive corners Sealing lip available Standards pprovals Power supply Operating temperature P material R/R material umidity , 954-1, ISO , I/ , SI 11.19, S marked for all applicable directives, culus and TÜV, c-tick not required Operates on 4V supplied from control unit -5 to +55 (23 to 131 ) 0 to + 55 (32 to 131 ) 90% R nclosure Protection IP67 ( 6P) onductor Size (18W) aterials P ounting Weight R/R thylene Propylene iene odified Rubber crylonitrile (34% nitrile) utadiene Rubber/hloropriene Rubber ny position using Type 112 rail See Ordering etails hemical Resistance of Safedge Profile Substance Resistance S Profile P Resistance Profile R/R cetic cid (%) ood ood cetone ood air mmonium ydroxide (35%) ood ood enzene Poor Poor iesel Oil Poor ood thyl lcohol (thanol) ood ood ydrochloric cid (%) ood ood Lubricating Oil Poor ood itric cid (%) ood air Petrol Poor air Silicone luids ood ood Sodium hloride (25%) ood ood Trichlorethylene ood Poor Vegetable Oils (general) ood ood Water (distilled) ood ood Water (sea) ood ood 2-94

2 43 (1.69) 43 (1.69) Product Selection Profiles Presence Sensing Safety evices (Page 2-0) imension Profile ushion actor 24.5 (0.96) 01S lack, P, Weight: 463g/m (0.33lbs/ft) 5mm Length m (ft) atalogue umber 5 (16.4) S05 (32.8) S 20 (65.6) S (0.96) 01 lack, R/R, Weight: 460g/m (0.31lbs/ft) 5mm 5 (16.4) (32.8) (65.6) (0.96) 01R Red, P, Weight: 502g/m (0.34lbs/ft) 5mm 5 (16.4) R05 (32.8) R 20 (65.6) R20 14 (0.55) 16S lack, P, Weight: 843g/m (0.57lbs/ft) 19mm 5 (16.4) S05 (32.8) S 20 (65.6) S20 14 (0.55) 16 lack, R/R, Weight: 837g/m (0.56lbs/ft) 19mm 5 (16.4) (32.8) (65.6) (2.68) 36 (1.42) 30 (1.18) 03S lack, P, Weight: 1209g/m (0.81lbs/ft) 41mm 5 (16.4) S05 (32.8) S 20 (65.6) S (0.96), 05S ( ) lack, P, with Sealing Lip Weight: 545g/m (0.37lbs/ft) 5mm 5 (16.4) S05 (32.8) S 20 (65.6) S20 43 (1.69) 14 (0.55), 0804S 17 (0.67) lack, P, with Sealing Lip Weight: 13g/m (0.68lbs/ft) 19mm 5 (16.4) S05 (32.8) S 20 (65.6) S

3 67 (2.64) 16 (0.63) 68 (2.68) 36 (1.42) Presence Sensing Safety evices Product Selection Profiles (Page 2-0) imension Profile ushion actor 30 (1.18) I, L 02S 29 (1.14) lack, P, with Sealing Lip Weight: 1291g/m (0.87lbs/ft) 41mm (1.61in) Length m (ft) atalogue umber 5 (16.4) S05 (32.8) S 20 (65.6) S20 18 (0.71) 0118S lack, P Weight: 242g/m (0.163lbs/ft) 3.75mm (0.15in) 5 (16.4) S05 (32.8) S 20 (65.6) S20 50 (1.97), O 1111S lack, P Weight: 680g/m (0.457lbs/ft) 5 (16.4) S05 (32.8) S 20 (65.6) S

4 Product Selection Rails Presence Sensing Safety evices imension mm (inches) atalogue umber I 18 (0.71) 8.5 (0.33) 20 (0.79) 18 (0.71) luminium type; Type 112/. 3m (9.8ft) length Weight: 258g/m (0.17lbs/ft) Zinc-oated Steel; Type 112/S 2m (6.5ft) length Weight: 663g/m (0.45lbs/ft) PV lack; Type 112/P 3m (9.8ft) length Weight: 111g/m (0.07lbs/ft) PV Red; Type 112/PR 3m (9.8ft) length Weight: 111g/m (0.07lbs/ft) PV Yellow; Type 112/PY 3m (9.8ft) length Weight: 111g/m (0.07lbs/ft) luminium Vertical Lip; Type 112/ 2 2m (6.5ft) length Weight: 368g/m (0.25lbs/ft) luminium orizontal Lip; Type 112/3 2m (6.5ft) length Weight: 388g/m (0.26lbs/ft) luminium eep hannel; Type 112/4 2m (6.5ft) length Weight: 345g/m (0.23lbs/ft) luminium; Suitable for ini Profile Only 2m (6.5ft) length Weight: 150g/m ( lbs/ft) 440-R R R1212P 440-R1212PR 440-R1212PY 440-R R R R (0.51) 45 (1.77) luminium Suitable for Rubber oot Only?m (ft) length Weight: 667g/m (0.448lbs/ft) 440-R2151 (0.4) 45 (1.77) luminium nd Plate for -Rail Option 2 Plates 4 Screws, flat head, Philips, mm, #6, Weight: 7g (0.01lbs) 440-R

5 Presence Sensing Safety evices Product Selection omponent Parts imension ame atalogue umber onnector and able 1m 2m 5m 12m 15m Terminator 6kΩ (yellow) resistor for series termination 15kΩ (blue) for parallel termination losing ap losing ap material: P losing ap material: R S losing ap To close profiles S and S. To close profiles S xial onnector With this connector you can directly connect two profiles. Suitable for S and R profiles S Straight Pin onnector 90 orner onnector 90 orner onnector (vertical) it contains one pair of pins suitable for one joint. When using profile S select When using profile R select When using profile select When using profile S select When using profile S select When using profile select When using profile select When using profile S or R select When using profile select When using profile S select When using profile S select S IS I S S S S S 45 orner onnector When using profile orner onnector When using profile

6 Product Selection omponent Parts Presence Sensing Safety evices imension ame atalogue umber Use only on ini Profile 1m onnector and able Use only on ini Profile 3m Use only on ini Profile 5m Terminator Use only on ini Profile 8kΩ (yellow) resistor for series termination losing ap Use only on ini Profile losing ap material: P yanocrylate dhesive ontents: 3g. Sufficient for approximately terminations Shears Use to cut profiles onnection ox Polycarbonate housing 53mm X 53mm X 35mm complete with two pole terminal and trumpet type screw on connector with strain and relief clamp. or use with coiled cable oiled onnection able 2.5m (8.2ft) (extended) of flexible coiled cable m (11.5ft) (extended) of flexible coiled cable onnection ox ontrol Unit losing ap onnector with Resistor Rail onnection ox oiled able xample application of profile using coiled cable. The coiled cable can not be directly connected to the profile due to the weight of the cable. The proper use of the coiled cable is to connect the coiled cable to the profile through the connection box. The coiled cable should be secured to both the moving and stationary objects so as to prevent straining of the terminal connections. able onnector losing ap 2-99

7 Presence Sensing Safety evices actory ssembled Product Selection (standard profile) 440- ➊ V a b c d e a I L O I L Profile 01S 01R 01 05S with Sealing Lip on Right Side 16S S with Sealing Lip on Right Side 03S 02S with Sealing Lip on Right Side 05S with Sealing Lip on Left Side 0804S with Sealing Lip on Left Side 02S with Sealing Lip on Left Side Rubber oot over 01S Rubber oot over 16S b Rail 1212 aluminium for Profile codes -L 1112 zinc coated steel for Profile codes -L 1212P PV black for Profile codes -L 1212PR PV red for Profile codes -L 1212PY PV yellow for Profile codes -L 1214 aluminium with vertical lip for Profile codes -L 1215 aluminium with horizontal lip for Profile codes -L 1216 aluminium deep rail for Profile codes -L 2151 aluminium for Profile codes and O o -Rail (not needed) c able ntrance LT left entrance with 1m cable LT left entrance with 2m cable LT left entrance with 3m cable LT left entrance with 5m cable LT left entrance with m cable RT right entrance with 1m cable RT right entrance with 2m cable RT right entrance with 3m cable RT right entrance with 5m cable RT right entrance with m cable ST straight entrance with 1m cable ST straight entrance with 2m cable L O P Q R S T I L O P Q R S T U V 5 digit number d (continued) able ntrance RT right entrance with m cable ST straight entrance with 1m cable ST straight entrance with 2m cable ST straight entrance with 3m cable ST straight entrance with 5m cable ST straight entrance with m cable UR entrance with 1m cable UR entrance with 2m cable UR entrance with 3m cable UR entrance with 5m cable UR entrance with m cable ➊ Order controller separately. See page 2-4 for selection details. e Termination LT left exit with 1m cable LT left exit with 2m cable LT left exit with 3m cable LT left exit with 5m cable LT left exit with m cable RT right exit with 1m cable RT right exit with 2m cable RT right exit with 3m cable RT right exit with 5m cable RT right exit with m cable ST straight exit with 1m cable ST straight exit with 2m cable ST straight exit with 3m cable ST straight exit with 5m cable ST straight exit with m cable UR exit with 1m cable UR exit with 2m cable UR exit with 3m cable UR exit with 5m cable UR exit with m cable Parallel Termination 15kΩ Series Termination 6kΩ f Length of dge nter length of edge in mm for example: 50m=50000; 500mm= mm minimum 2-0

8 actory ssembled Product Selection (mini-profile) 440- ➊ I V a b c d e a I Profile 0118S 3.75mm (0.15in) ushion actor lack, ini Profile b Rail 1219 aluminium for Profile code o -Rail (not needed) P R S P R S V 5 digit number Presence Sensing Safety evices c able ntrance ST straight entrance 1m cable ST straight entrance 3m cable ST straight entrance 5m cable UR entrance 1m cable UR entrance 3m cable UR entrance 5m cable ➊ Order controller separately. See page 2-4 for selection details. d Termination ST straight entrance 1m cable ST straight entrance 3m cable ST straight entrance 5m cable UR entrance 1m cable UR entrance 3m cable UR entrance 5m cable Series Termination 8kΩ e Length nter length of edge in mm for example: 50m=50000; 500mm= mm minimum 2-1

9 Presence Sensing Safety evices actory ssembled xamples V Series Termination 6Ω Type 01 Oil Resistant Profile 1250 mm long 440-V01250 Type 112/ luminum Rail This is a single oil resistant profile which is 1250mm long. The edge is terminated with a Series Termination. 1m cable enters straight into the closing cap from a I-rail mounted controller. The profile is mounted on a standard aluminium rail LT able xit 5m Type 01 Oil Resistant Profile 1250mm long ST able ntrance with 1m able Type 1214 luminum Rail with Vertical Lip RT Right and ntrance with 2m able This is a single oil resistant profile which is 1250mm long. The edge is terminated with a 1m cable. 1m cable enters straight into the closing cap. The profile is mounted on a standard aluminium rail. control unit is not included. This edge is intended to be used in series with another length of edge which has a terminating resistor. V Series Termination 6Ω Type 05S Profile with Sealing Lip 490mm long 440-V00490 Type 1214 luminum Rail with Vertical Lip RT Right and ntrance with 3m able ote orientation of sealing lip to cable entrance This is single profile has a sealing lip and is 490mm long. The profile is terminated with a Series Termination. 3m cable enters into the right hand side of the closing cap from a plastic surface mounted controller. The profile is mounted on an aluminium rail with a vertical lip for ease of mounting. The orientation of the sealing lip to the vertical lip can be reversed by the user by sliding the profile out of the Rail, rotating the Rail 180 and then re-inserting the profile back into the Rail. 440-U03560 Type 1215 luminum Rail with orizontal Lip U Parallel Termination 15Ω Type 01R Profile 3560mm long LT ntrance with 3m able This is a red-coloured single profile which is 3560mm long. This profile is part of a parallel profile system, for ease of mounting, as it is terminated with a Parallel Termination. 3m cable enters into the left side of the closing cap from a plastic surface mount controller. The profile is mounted on an aluminium Rail with a horizontal lip for ease of mounting. The horizontal lip can be reversed by the user by sliding the profile out of the Rail, rotating the Rail and then re-inserting the profile back into the Rail. separate catalogue number must be entered for the other profile. 2-2

10 This datasheet has been downloaded from: ree ownload aily Updated atabase 0% ree atasheet Search Site 0% ree I Replacement Search Site onvenient lectronic ictionary ast Search System ll atasheets annot e odified Without Permission opyright ach anufacturing ompany

Plok. Rapid Mating Multi-Pin Industrial Connector. Amphenol Industrial Sine Systems * Pyle Connectors Corporation

Plok. Rapid Mating Multi-Pin Industrial Connector. Amphenol Industrial Sine Systems * Pyle Connectors Corporation - Plok Rapid Mating Multi-Pin Industrial onnector mphenol Industrial Sine Systems * Pyle onnectors orporation eatures and enefits Rapid mate spring loaded, push to mate, pull to unmate coupling system