TRU-WELD Stud Welding
|
|
|
- Emma Alyson Gallagher
- 6 years ago
- Views:
Transcription
1 HEAE CONCRETE ANCHOR FU WE BASE TYPE CA STU TYPE F FERRUE SUPPIE Head iameter (H) 1/2 for all 1/4 Headed Concrete Anchors. Head Height (HT) 3/16 for all 1/4 Headed Concrete Anchors. iameter ength TRU WE es 1/4 1-1/8 CA , , lbs. 1,296 lbs. 22 lbs. 1/4 2-11/16 CA , lbs. 1,215 lbs. 43 lbs. 1/4 3-1/8 CA , lbs. 1,377 lbs. 50 lbs. 1/4 4-1/8 CA , lbs. 1,026 lbs. 63 lbs. Concrete Anchors are used in all types of concrete connections. They can be welded to a flat surface, or to the inside or outside of an angle. ength: ength is listed before weld. Stud diameters 1/4 will be approx. 1/8 shorter after welding. TRU WE concrete anchors can be made in any length above the standard minimum. Material: ow carbon steel, ASTM A29, CA Studs are also available in weldable stainless steel. Type 302 is the most commonly used. Other grades of stainless steel (except Type 303) are available when required. Elongation (% in 2 in.) 17% 20% Elongation (% in 5x dia.) 14% 15% CN 050 GC 025 (Standard GC 037 FERRUE PAT (UA EG) QN 025 (Standard QN 037 Reduction of Area 50% 50% Studs are general purpose studs. Studs are headed, bent, or of other configuration that
2 HEAE CONCRETE ANCHOR FU WE BASE TYPE CA STU TYPE F FERRUE SUPPIE iameter (H) 3/4 for all 3/8 Headed Concrete Anchors. Head Height (HT) 9/32 for all 3/8 Headed Concrete Anchors. iameter ength TRU WE es 3/8 1-3/8 CA , lbs. 1,890 lbs. 68 lbs. 3/8 1-5/8 CA , lbs. 2,133 lbs. 77 lbs. 3/8 2-1/8 CA , lbs. 1,809 lbs. 92 lbs. 3/8 2-5/8 CA , lbs. 1,782 lbs. 111 lbs. 3/8 3-1/8 CA , lbs. 1,674 lbs. 124 lbs. 3/8 4-1/8 CA , lbs. 1,485 lbs. 154 lbs. 3/8 5-1/8 CA , lbs. 1,512 lbs. 185 lbs. 3/8 6-1/8 CA , lbs. 1,188 lbs. 212 lbs. 3/8 8-1/8 CA , lbs. 1,863 lbs. 274 lbs. Concrete Anchors are used in all types of concrete connections. They can be welded to a flat surface, or to the inside or outside of an angle. ength: ength is listed before weld. Stud diameters 3/8 will be approx. 1/8 shorter after welding. TRU WE concrete anchors can be made in any length above the standard minimum. Material: ow carbon steel, ASTM A29, CA Studs are also available in weldable stainless steel. Type 302 is the most commonly used. Elongation (% in 2 in.) 17% 20% Elongation (% in 5x dia.) 14% 15% CH 037 GC 037 (Standard GC 050 FERRUE PATE (UA EG) QN 037 (Standard QN 050 Reduction of Area 50% 50% Studs are general purpose studs. Studs are headed, bent, or of other configuration that
3 HEAE CONCRETE ANCHOR FU WE BASE TYPE CA STU TYPE F FERRUE SUPPIE Head iameter (H) 1 for all 1/2 Headed Concrete Anchors. Head Height (HT) 5/16 for all 1/2 Headed Concrete Anchors. iameter ength TRU WE es 1/2 1-1/8 CA , lbs. 1,836 lbs. 112 lbs. 1/2 1-1/2 CA , lbs. 1,836 lbs. 132 lbs. 1/2 1-5/8 CA , lbs. 1,728 lbs. 138 lbs. 1/2 2-1/8 CA , lbs. 1,809 lbs. 166 lbs. 1/2 2-5/8 CA , lbs. 1,917 lbs. 198 lbs. 1/2 3-1/8 CA , lbs. 1,836 lbs. 223 lbs. 1/2 4-1/8 CA , lbs. 1,512 lbs. 277 lbs. 1/2 5-5/16 CA , lbs. 1,404 lbs. 339 lbs. 1/2 6-1/8 CA , lbs. 1,323 lbs. 388 lbs. 1/2 8-1/8 CA , lbs. 1,350 lbs. 495 lbs. 1/2 10-1/8 CA , lbs. 1,377 lbs. 680 lbs. 1/2 12-1/8 CA ength: ength is listed before weld. Stud diameters 1/2 will be approx. 1/8 shorter after welding. TRU WE concrete anchors can be made in any length above the standard minimum. Material: ow carbon steel, ASTM A29, CA Studs are also available in weldable stainless steel. Type 302 is the most commonly used. CH 050 GC 050 (Standard GC 062 FERRUE PATE (UA EG) QN 050 (Standard Elongation (% in 2 in.) 17% 20% Elongation (% in 5x dia.) 14% 15% Reduction of Area 50% 50% Studs are general purpose studs. Studs are headed, bent, or of other configuration that are used as an essential component in composite beam design and construction.
4 HEAE CONCRETE ANCHOR FU WE BASE TYPE CA STU TYPE F FERRUE SUPPIE Head iameter (H) 1 1/4 for all 5/8 Headed Concrete Anchors. Head Height (HT) 5/16 for all 5/8 Headed Concrete Anchors. iameter ength TRU WE es 5/8 1-7/16 CA , lbs. 2,295 lbs. 208 lbs. 5/8 1-11/16 CA , lbs. 2,079 lbs. 227 lbs. 5/8 1-15/16 CA , lbs. 2,106 lbs. 248 lbs. 5/8 2-1/8 CA , lbs. 1,836 lbs. 264 lbs. 5/8 2-3/16 CA , lbs. 1,917 lbs. 270 lbs. 5/8 2-11/16 CA , lbs. 2,187 lbs. 319 lbs. 5/8 3-3/16 CA , lbs. 2,025 lbs. 363 lbs. 5/8 3-11/16 CA , lbs. 1,674 lbs. 398 lbs. 5/8 4-3/16 CA , lbs. 1,863 lbs. 444 lbs. 5/8 4-11/16 CA , lbs. 1,701 lbs. 487 lbs. ength: ength is listed before weld. Stud diameters 5/8 will be approx. 3/16 shorter after welding. TRU WE concrete anchors can be made in any length above the standard minimum. Material: ow carbon steel, ASTM A29, CA Studs are also available in weldable stainless steel. Type 302 is the most commonly used. Elongation (% in 2 in.) 17% 20% CH 075 GC 062 (Standard GC 075 FERRUE PATE (UA EG) (Standard QN 075 Elongation (% in 5x dia.) 14% 15% Reduction of Area 50% 50% Studs are general purpose studs. Studs are headed, bent, or of other configuration that
5 HEAE CONCRETE ANCHOR FU WE BASE TYPE CA STU TYPE F FERRUE SUPPIE Head iameter (H) 1 1/4 for all 5/8 Headed Concrete Anchors. Head Height (HT) 5/16 for all 5/8 Headed Concrete Anchors. iameter ength TRU WE es 5/8 5-3/16 CA , lbs. 1,485 lbs. 528 lbs. 5/8 6-9/16 CA , lbs. 1,485 lbs. 604 lbs. 5/8 8-3/16 CA , lbs. 1,404 lbs. 646 lbs. 5/8 9-3/16 CA , lbs. 1,053 lbs. 781 lbs. 5/8 10-3/16 CA lbs. 882 lbs. 946 lbs. ength: ength is listed before weld. Stud diameters 5/8 will be approx. 3/16 shorter after welding. TRU WE concrete anchors can be made in any length above the standard minimum. Material: ow carbon steel, ASTM A29, CA Studs are also available in weldable stainless steel. Type 302 is the most commonly used. Elongation (% in 2 in.) 17% 20% FERRUE PATE (UA EG) Elongation (% in 5x dia.) 14% 15% Reduction of Area 50% 50% GC 062 (Standard (Standard Studs are general purpose studs. CH 075 GC 075 QN 075 Studs are headed, bent, or of other configuration that
TorqBolt Wedge Anchors Torque Controlled Expansion Anchor
TorqBolt Wedge Anchors Torque Controlled Expansion Anchor Product Description The Torqbolt wedge anchor is a torque-controlled, wedge expansion anchor for heavy duty fastening applications where high pull
TYPE: LSF - LIFTING STUD FOOT ANCHOR DESCRIPTION: The design of the anchor means no additional reinforcement is required as the forces are transferred into the concrete from the design of the foot of the
l DESCRIPTION l FEATURES l LIMITATIONS l TYPICAL APPLICATIONS l MATERIAL SPECIFICATIONS TECHNICAL MANUAL SECTION 2.3 PAGE 1 / 6
www.ucanfast.com TECHNICAL MANUAL SECTION 2.3 PAGE 1 / 6 l DESCRIPTION The UCAN WAG anchor is a fully threaded torque controlled expansion anchor assembled with a three segment expansion clip. All parts
Anchor Component Material Standard Mechanical Properties
SECTION 4.1 PAGE 1 / 5 l description The UCAN sleeve anchor is a light-medium duty anchor ideal for applications in concrete, hollow block and brick. It is a mechanical expansion anchor assembled with
THREADED ROD & ACCESSORIES. Superior strength, maximum versatility.
Superior strength, maximum versatility. GRTRBRO 12/2013 Threaded rod is used for general purpose fastening and installation. Used in any place that a long bolt is required, threaded rod can be cut to the
Foundation Products. Poured In Ground Anchor Bolts E1 - E4. Structural Foundations E5 - E12. Copyright 2016 s Industry Inc. SIE-RA-CMP EN
Foundation Products Poured In Ground Anchor Bolts E1 - E4 Structural Foundations E5 - E12 EA EB Poured in Ground Anchor Bolts Layout SIEMENS Anchor Bolts 131702-4X shown for reference purposes only! Actual
Terminology. 2 MESH WIRE CLOTH (count from center to center of wires) 1/2 INCH OPENING WIRE CLOTH (clear space between wires)
CALENDERING - A rolling operation which flattens the knuckles of wire cloth giving it a smoother surface. CRIMP - Undulations in warp and fill wires which hold each other in place. FILL WIRE - aka SHUTE
MICHIGAN DEPARTMENT OF TRANSPORTATION 6" X 8" (NOMINAL POST) 3-1/2" DIA. 2 HOLES TAPERED HARD WOOD WEDGES (HARDWOOD WEDGE
X (NOMINAL POST) 1-1/ DIA. 2 HOLES X 8" (NOMINAL POST) 3-1/ DIA. 2 HOLES TAPERED HARD WOOD WEDGES (HARDWOOD WEDGE TO BE OAK, MAPLE OR OTHER APPROVED DENSE HARDWOODS) TO HOLD POST IN A STABLE POSITION AFTER
WEDGE-ALL Wedge Anchors
WEDGE-ALL Wedge Anchors The Wedge-All wedge anchors are a non-bottom bearing, wedge-style expansion anchor for use in solid concrete or grout-fi lled masonry. A one-piece clip ensures uniform holding capacity
HARDPOINT ASESSMENT FOR SUSPENSION BONDAGE
HARDPOINT ASESSMENT FOR SUSPENSION BONDAGE By Jim Duvall w Jim Duvall 2011 COURSE GOALS Will that hold me? Why should you worry? How much should you worry? Who pays the price of failure? w Jim Duvall 2011
Mini Channel & Fittings
Our mini channels and fittings provide for an economical method of supporting light load requirements on a strut system. Channel Channels are cold formed on our modern rolling mills from 18 Ga. (1.2 mm)
Submittal / Substitution Request
Submittal / Substitution Request SUBMITTED TO: To: Firm: Project: Submitted Product: SIMPSON STRONG-TIE WEDGE-ALL WEDGE ANCHOR Specified Product: Section: Page: Detail/Sheet No.: Description of Application:
Riverdale Mills. Product Guide
Riverdale Mills Product Guide Riverdale Mills Corporation is one of the largest manufacturers of welded wire mesh in the world. It is known globally as the industry leader for galvanized and PVC coated
CIA-EA Technical Data Sheet
Description Our CIA-EA Epoxy Acrylate adhesive anchor system has been specially formulated as a high-performance, two component adhesive anchor system for threaded bars in uncracked concrete. Base Material
Hardened Steel Washers
USS (Type A Wide) Flat Washers Hardened Steel Washers Grade 8 S.A.E. Dimensions American Standard Lbs. Per No./Pcs. Gauge M Pcs. Per Lb. 3/16 9/16 1/4 18 (3/64) 2.8 361 1/4 3/4 5/16 16 (1/16) 6.7 149 5/16
Introduction Introduction
Introduction Maritime International is a leading manufacturer of marine bollards and cleats worldwide. Our range of bollards and cleats is unsurpassed by any other manufacturer or supplier. Maritime can
5. STRUCTURAL ANALYSIS
5. STRUCTURAL ANALYSIS The skeletal structure of the experiment casing is constructed from UNISTRUT with all experiment equipment mounted by UNISTRUT provided fasteners. All maximum loads for nuts, bolts,
TZ WEDGE ANCHOR FOR CRACKED AND UNCRACKED CONCRETE
www.ucanfast.com TECHNICAL MANUAL SECTION 2.2 PAGE 1 / 10 ä DESCRIPTION UCAN TZ torque controlled mechanical expansion wedge anchors have a Category 1 classification. They are used to resist static, wind
CHEMICAL. Straight cut rod is provided in the materials listed below and includes nuts / washers.
161 STRAIGHT CUT ROD Straight cut rod is provided in the materials listed below and includes nuts / washers. Straight Rod 22-1/2 Bent Rod A 307 THREADED ANCHOR ROD, ZINC PLATED (ASTM B633, CLEAR CHROMATE)
Stainless Steel Accessories
Stainless Steel Accessories Single Sleeves (stainless steel) Rope Weight ea. BSS505-516 5/16 0.2 BSS505-038 3/8 0.2 BSS505-716 7/16 0.3 BSS505-012 1/2 0.3 BSS505-058 5/8 0.8 BSS505-034 3/4 1 BSS505-078
MSA Confined Space Entry Equipment
MSA Confined Space Entry Equipment Because every life has a purpose... MSA Confined Space Entry Equipment MSA XTIRPA Manhole Guard System Use for confined space vertical entry and fall protection when
KlassikDrain Section. Technical Handbook and Product Catalog. General purpose trench drainage
Technical Handbook and Product Catalog Surface Drainage 6 Surface drainage options 8 Product selection 10 Trench drain hydraulics 16 Loadings 22 Material data 24 End user requirements Standard Products
MADE-TO-ORDER SERIES CHAIN
Specialty/Made-o-Order Attachments Standard Straight and Bent Attachment Chain MAE-O-OE SEIES CAIN S iamond M-35, SA1 S1 (one hole) M-1, S1 S2 (one hole) imensions in Inches WI WO PIC S2 S1 B2 B1 A1 1
Series 8500 Expansion Compensators. Catalog 674H
Series 8500 Expansion Compensators Catalog 674H 500 Laminated Bellows Expansion J Series 8500 on Joints Expansion Compensators Sizes 3/4" through 4" Threaded, welded, flanged and grooved steel pipe joints
Technical information for hinges
451 452 Technical information for hinges In the tables on the following pages are listed a large range of hinge variations. Many more variations are possible if hinges with guide tabs are required i.e.
VERTICAL BLADDER TANK
Balanced Pressure Proportioning System Reliable Foam System Requiring Only Water Power Perfect For Tight Spaces UL Listed, ASME, National Board Registered Bladder-UL162 Approved, High Tensile Pressure
Football Equipment. 5 9/16" Gooseneck Goalposts
5 9/16" Gooseneck Goalposts Football Equipment FB55CG 5 9/16" Gooseneck College Goalposts Applies also to FB55CG-SY and FB55CG-WT Goalposts shall meet all NCAA rules. Goalposts shall be of the single bent
Mechanical Anchoring Systems HDA Undercut Anchor Product description. HDA-P Undercut Anchor Pre-Set Type
Mechanical Anchoring Systems 3.3 3.3.1 HDA Undercut Anchor 3.3.1.1 Product description The Hilti HDA undercut anchor is a heavy-duty mechanical anchor with carbide-tipped undercut segments used to perform
Utility Anchor System
Utility Anchor System The Dayton Superior Utility Anchor System is designed to economically simplify the lifting and handling of precast concrete elements. Its economics, ease of use and versatility will
TAZGO DIVISION. Available Services: Shearing, Plate Burning, Saw Cutting, Drilling
TAZGO DIVISION STEEL~STAINLESS~ALUMINUM Beams ~ Channel ~ Flat bar ~ HR Rounds ~ CR Rounds Angle ~ Square Tube ~ Rectangle Tube Pipe~ DOM~ Plate~ HR sheets ~ CR sheets~ Galvanized Sheets ~ Cross Members
DIVISION: 06--WOOD AND PLASTICS SECTION: Wood, Plastic and Composite Fastenings
DIVISION: 06--WOOD AND PLASTICS SECTION: 060523 -- Wood, Plastic and Composite Fastenings REPORT HOLDER: ITW BUILDING COMPONENTS GROUP, INC. 2400 LAKE ORANGE DRIVE, SUITE 150 ORLANDO, FLORIDA 32837 (800)
Glass Steel, Inc. Fiberglass Composite Troughs
Glass Steel, Inc. Fiberglass Composite Troughs El Mira, CA Flat Bottom Curved Troughs Glass Steel, Inc. FIBERGLASS COMPOSITE TROUGHS Glass-Steel, Inc. manufactures a proprietary system of composite effluent
The first and only continuous tension holdown system.
The first and only continuous tension holdown system. CANADA LIMIT STATES EDITION FEBRUARY 2017 Earthbound Seismic and Wind Holdown Systems. The industry leader in hardware and design technology. FEATURES
Flagpole Selection Guide
Selection Guide Selecting the right pole for your project To chose the right pole you should consider both flagpole Style and Height. The common styles are outlined on this page for easy comparison. The
Installation and Operation Instruction Manual
Installation and Operation Instruction Manual Toggle Lok Anchor - Model #7442 Portable Concrete Anchorage Connector ANSI Z359.1 5,000 lbs / 22.24 kn FallTech, Inc 1306 Alameda Street Compton, CA 90221
We re good at what we do! Anywhere, TX SITE
2224 East 39 th Street North Sioux Falls, SD 57104 (800).653.3392 605.332-7833 fax We re good at what we do! SURFACE ANCHOR INSPECTION FOR ABC COMMUNICATION S Anywhere, TX SITE This is an actual inspection
LiftAlloy Chain Slings
CHAIN SLING BASICS Slings Lift-All chain slings meet or exceed all OSHA, ASME B30.9 and NACM standards and regulations. chain slings, available in 80 for 7/8"- /4" and 00 for 7/32"-3/4", are recommended
List of Figures. List of Tables
City of Columbia Engineering Regulations PART 19: SPECIFICATIONS FOR FENCING MATERIALS Table of Contents Paragraph Description Page No. 19.1 General 19-1 19.2 Construction Materials 19-1 List of Figures
WELDING POSITIONER MODEL NO:
WELDING POSITIONER WP-250 13-3/4 Diameter Table 0 to 5.5 RPM Rotation Speed Manual Tilt Adjustment 0 to 90 Tilting Angle Standard w/foot Control Switch Shipping Weight 113 lbs. Designed for rotation of
SHMS. Downstream Beamline. Large SHMS/HMS Angles (Config-1) Large SHMS / Min HMS Angle (Config-2) Dan Young Ext /26/2015 1
SHMS Dan Young Ext 5255 Downstream Beamline Large SHMS/HMS Angles (Config-1) Large SHMS / Min HMS Angle (Config-2) 1/26/2015 1 10 14.5 SHMS Beam Line Large SHMS/HMS Angles (Configuration-1) SHMS minimum
TECHNICAL MANUAL. COPRA Anchoring Coupler. For Smart Bolted Connections
TECHNICAL MANUAL Anchoring Coupler For Smart Bolted Connections Version: PEIKKO GROUP 03/2017 Anchoring Coupler For bolted connections Multi-purpose anchoring system for all bolted connections Simplifi
Punches. True-Point Gage Pin ANSI/ASME. Pages B6 & B7 Pages B8 & B9 Pages B10 S_BP ES_BP _BQ _FQ 8-99 PAGE B1
Contents Section B - Inch Shoulder unches Solid unches Ejector S_R O RE R SS N ES_R O RE R SS N ages B2 & B3 ages B4 & B5 ilot unches True-oint Gage in ANSI/ASME S_RN S_G S_R ages B6 & B7 ages B8 & B9
Roughneck TM Mesh Slings
Roughneck TM Slings ROUGHNECK WIRE MESH SLINGS Widely used in metalworking shops and steel warehouses where loads are abrasive, hot or tend to cut web slings Features and Benefits Promotes Safety Steel
Made in the USA. For Fall Protection Only. SafeLok Part Description
Operations and Instruction Manual SafeLok Anchorage - Model # 4011 IM-0051 REV A Portable Concrete and Steel Anchorage Connector ANSI Z359.1-07 5,000 lbs / 22kn Made in the USA The 3/4 Fall Protection
MAKE BOLLARD IMPACT RESISTANT PROTECT FOUNDATIONS RE-USE BOLLARD
\\ PROTECT FOUNDATIONS In-ground or surface mount Impact Recovery System protects foundations from damage when bollards are impacted, need replacing or upgrading. Surface mount version uses Impact resistant
SCREEN OPENINGS FOR STRAINERS
SCREEN OPENINGS FOR STRAINERS 100 Mesh - 30% O.A. 0.006 Openings 80 Mesh - 36% O.A. 0.008 Openings 60 Mesh - 38% O.A. 0.010 Openings 40 Mesh - 41% O.A. 0.016 Openings 30 Mesh - 45% O.A. 0.022 Openings
Originally Issued: 10/08/2010 Revised: 10/27/2017 Valid Through: 10/31/2018
ITW BUILDING COMPONENTS GROUP INC. ITW ALPINE HANGERS AND ANCHORS CSI Section: 06 05 23 Wood, Plastic and Composite Fastenings 1.0 RECOGNITION ITW Alpine Hangers and Anchors recognized in this report has
SECURITY AND CONFIDENCE AT HEIGHT
Detachable Cable Sleeve SECURITY AND CONFIDENCE AT HEIGHT THE ULTIMATE IN FALL PROTECTION THE DANGERS OF WORKING AT HEIGHT Every day, workers around the world climb ladders to great heights to get their
GRAVITY BIKE RACK ASSEMBLY & OPERATING INSTRUCTIONS
GRAVITY BIKE RACK 94479 ASSEMBLY & OPERATING INSTRUCTIONS Due to continuing improvement, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo, CA 93011
RIGGERS SAFETY SAFETY IS IN THE DETAILS FULL LINE CATALOG
RIGGERS SAFETY SAFETY IS IN THE DETAILS FULL LINE CATALOG Riggers Safety is a California-based manufacturer of Personal Fall Arrest Systems (PFAS) and Fall Prevention Products. Our automated manufacturing
DUPLEX TECHNICAL INFORMATION FABRICATED DUPLEX STRAINERS
DUPLEX STRAINER TECHNICAL INFORMATION - 119 - SCREEN OPENINGS 100 Mesh - 30% O.A. 0.006 Openings 80 Mesh - 36% O.A. 0.008 Openings 60 Mesh - 38% O.A. 0.010 Openings 40 Mesh - 41% O.A. 0.016 Openings 30
RIGGERS SAFETY SAFETY IS IN THE DETAILS FULL LINE CATALOG
RIGGERS SAFETY SAFETY IS IN THE DETAILS FULL LINE CATALOG Riggers Safety is a California-based manufacturer of Personal Fall Arrest Systems (PFAS) and Fall Prevention Products. Our automated manufacturing
safety tieback anchors
ref.: T4750 rev. no.: 2 date: 10/04 page: 1/1 Flexibility Tractel s Swingstage Division has a full range of Safety Tieback Anchors to suit every building and budget; from the standard U-bar model, to more
Superstrut. Metal Framing. Surface Raceway and Lighting Systems
Material Superstrut electrical raceway, fixture hanging channel, closure strip and accessories are manufactured from hot rolled strip steel. Standard finish for the accessories is GoldGalv. Design Data
ASYBCO 90 O ELBOW LONG RADIUS O.D. I.D.
90 O ELBOW LONG RADIUS Standard weight Extra strong Schedule 160 Double extra strong ASTM A-234 ASME / ANSI B16.9 Carbon and ferritic alloy steel Produced from X-rayed, stress-relieve welded pipe. Welds
COMPFIRE CCFT-FP_550_55_ September 2010 Fin Plate Connection to Circular Concrete-Filled Tube Test Result
Reaction Frame Macalloy Bars Camera 3 Support Beam α Oven Bar Camera 2 Link Bar Camera 1 Tested Connection Jack Bar Electrical Furnace Reaction Frame Load Jack v2_5 April 2011 1 Oven Bar Link Bar View
COLLECTION
info@oxxeaninflatables.com www.oxxeaninflatables.com COLLECTION About OXXEAN Inflatables is dedicated to the manufacture of high quality PVC rigid inflatable boats. We are committed to exceed customer
Sta-Lok Safety Systems
Sta-Lok Safety Systems Product Information GENERAL AVIATION TIE-DOWNS & ANCHORS FOR AIRPORTS & AIRFIELDS LIGHT SINGLE ENGINE LIGHT TWIN ENGINE HELICOPTER Copyright 2012 Sta-Lok Safety Systems Eagan, Minnesota
HORIZONTAL BLADDER TANK
Balanced Pressure Proportioning System Reliable Foam System Requiring Only Water Power Perfect For Low Ceilings UL Listed, ASME, National Board Registered Bladder-UL162 Approved, High Tensile Pressure
Hilti, Inc South 122 nd East Avenue Tulsa, OK
Attached are page(s) from the 2014 Hilti North American Product Tech Guide. For complete details on this product, including data development, product specifications, general suitability, installation,
1) INTRODUCTION 2) THE UNFAIR ADVANTAGE
1 1) INTRODUCTION 2) THE UNFAIR ADVANTAGE and Stingray earth anchors are driven tipping plate soil anchors for reaction of tensile loads. anchors have ultimate capacities up to 20 tons, and Stingray anchors
Log Balance Beam. Product: (4 ), (6 )
Log Balance Beam A naturally appearing log with a sculpted bark finish makes for a very unique Log Balance Beam. Fabricated and themed from GFRC concrete to create a great look and feel. Available in 4
VTRE Series Track Roller Assembly V-Grooved Stud Type Eccentric Ball & Tapered Roller Bearings
VTRE Series Track Assembly V-Grooved Type entric Ball & Tapered Bearings VTRE-3.50E A B C D ED EL EO F FL G H P SD SL T Type Track Width Dia -.002 Offset Groove Center Hex Point Shoulder Shoulder Width
STEEL & PLASTIC STRAPPING
STEEL & PLASTIC STRAPPING For over 75 years, Continental Western Corporation (CWC) has been proud to provide our distributors with quality products, timely delivery and outstanding customer service. In
BRONZE BUSHING REPLACEMENT PROCEDURE DN345 & NL450C
1 BRONZE BUSHING REPLACEMENT PROCEDURE V.2 12/3/2014 DN345 & NL450C 2 Safety Instructions Removing Walking Beams 3 1. Position spreader on a flat concrete surface capable of supporting weight of spreader
General Information Gravity roller conveyors are available in many sizes and configurations as shown on the following pages. There are many factors to consider when selecting a gravity conveyor. The following
Standard Series Pipe Clamps Clamp Pair Selection
Standard Series Pipe lamps lamp Pair Selection Behringer s clamp pairs are available in different materials and incorporate a modular insert by group size. Standard series pipe clamps are available in
Drop-In Internally Threaded Anchor (DIAB) Mechanical Anchors. Key features. Material: Carbon steel. Coating: Zinc plated
Drop-In Internally Threaded Anchor (DIAB) Expansion shell anchors for use in solid base materials Simpson Strong-Tie introduces a new, redesigned Drop-In Anchor (DIAB) that provides easier installation
Furlex 104S-404S (Standard)
104S-404S (Standard) The 4th generation of an icon The fourth generation of is an uncompromising evolution of the world s best selling jib furling and reefing system. Proven design blended with innovation
APG001. Application Guide for Gas. T: F: E:
APG001 Application Guide for Gas T: 01480 442600 F: 01480 458829 E: customerservice@gpsuk.com www.gpsuk.com Application Guide for Gas Introduction 3-4 Range Overview 5-6 PE80 Yellow Pipe 7-9 Excel Yellow
CLEAN-PROTECT Emergency Gas Release Absorber Models: CP500SF, CS1000SF
CLEAN-PROTECT Emergency Gas Release Absorber Models: CP500SF, CS1000SF Controlled product information. Intended use: technical reference for quotations and similar customer projects. Not intended for general
BANKSMAN / SLINGER. 1. What is the smallest size diameter of synthetic rope allowed for use as a hand held tagline?
BANKSMAN / SLINGER 1. What is the smallest size diameter of synthetic rope allowed for use as a hand held tagline? A. 16mm B. 10mm C. 12mm 2. What is the maximum temperature that a webbing sling can be
Now with. Covers. Grade Level Box BULK FEATURES TESTING CRITERIA TECHNICAL SPECIFICATIONS
Grade Level Box BULK 24 /608 mm depth FEATURES Upgradeable Lightweight/Strong (TIER 22) Patented Anti-Slip Technology Anti-Seize Bolt Technology Industry Leader in Anti-Trip Hazard Prevention Superior
Health & Safety Policy and Procedures Manual SECTION 25 RIGGING AND HOISTING EQUIPMENT
SECTION 25 RIGGING AND HOISTING EQUIPMENT 1. RIGGING AND HOISTING: These rules apply to all Maul Electric, Inc. employees and subcontractors. Note: Maul Electric, Inc. employees will utilize mechanical
Guided Wave Radar in Solid Level Applications
Technical Note Rosemount 5300 Series Guided Wave Radar in Solid Level Applications KEY POINTS Measuring Range Probe End Projection function (PEP) Tensile Strength and Collapse Load Mounting Considerations
SIMPLAIR PIPING TOOL. JXT Company
SIMPLAIR PIPING INGERSOLL-RAND SIMPLAIR PIPING With push-in fittings and lightweight anodized aluminum pipe, a SimplAir system provides ideal connection throughout your entire air distribution system.
LiftAlloy TM Chain Slings
LiftAlloy TM LiftAlloy CHAIN SLING BASICS Lift-All chain slings meet or exceed all OSHA, ASME B30.9 and NACM standards and regulations LiftAlloy chain slings, available in grade 00 for 7/32" through 3/4",
WHY KINGPINLESS? Contender Kingpinless Models. Stainless Kingpinless. 85% of Caster KINGPINLESS. Kingpinless casters eliminate kingpin failure.
WHY KINGPINLESS? Kingpinless casters eliminate kingpin failure. Kingpinless casters are particularly well-suited for any type of power-towed applications where impact and shock loading cause failure in
PUSH PIER SYSTEMS STABILITY. SECURITY. INTEGRITY. Push Pier Systems PN #MBPPT
PUSH PIER SYSTEMS STABILITY. SECURITY. INTEGRITY. PN #MBPPT Push Pier Systems About Foundation Supportworks is a network of the most experienced and knowledgeable foundation repair and new construction
The Holding Power of Anchors
The Holding Power of Anchors G 1 Taylor The essential principle in the action of all anchors is that a surface set at an acute angle to the ground will dig in if pulled horizontally. In order that an anchor
Practical Steel Connection Software Design Using AISC 2010 Standard
Practical Steel Connection Software Design Using AISC 2010 Standard Including: Practical Advice for Reviewing Software Generated Connection Designs Steve Ashton, P.E., SECB Limit States that Changed 2
TECHNICAL DATA OBSOLETE
June 1, 2008 Foam 240a 1. DESCRIPTION The Chemguard Bladder Tank is one component in a balanced pressure foam proportioning system. It requires no external power, other than the water pressure to ensure
SAFETY JOURNAL FOR GIPFEL WEDGE ROCK ANCHOR BOLTS
SAFETY JOURNAL FOR GIPFEL WEDGE ROCK ANCHOR BOLTS NOTE: Here we are only talking about the wedge type expansion bolts. How do rock anchors fail? A rock anchor assembly mainly comprises of a Hanger and
Safety relief valves, type BSV 8 REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Safety relief valves, type BSV 8 REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction....................................................................................... 3
New MacLean-Dixie 4-1/2 Strength Squared Pipe Piles/Anchors (Patent Pending) for Compression and Tension Applications
Page: 1 of 6 New MacLean-Dixie 4-1/2 Strength Squared Pipe Piles/Anchors (Patent Pending) for Compression and Tension Applications P45 Series 4-1/2 (O.D.) Schedule 40 Pipe Pile Torque Capacity (ft-lbs)
1074 Kenran Industrial Dr. St. Louis, MO Phone: Taylortec WV-9A Work Vest
Taylortec WV-9A Work Vest WV-9A U.S.C.G. App# 160.03/9/0 Hammond, LA 70403 USA + 1 98 42 6266 Type V, inherently buoyant, 3 piece fabric covered foam work vest with pocket. 1 work vests per box. Polyethylene
MSA Confined Space Entry Equipment
MSA Confined Space Entry Equipment Because every life has a purpose... MSA Confined Space Entry Equipment MSA XTIRPA Manhole Guard System Use for confined space vertical entry and fall protection when
ASME Boiler & Pressure Vessel Code Analysis of the 1497 MHz High-Current Cryomodule Helium Vessel
1.0 Introduction ASME Boiler & Pressure Vessel Code Analysis of the 1497 MHz High-Current Cryomodule Helium Vessel Katherine Wilson 28 May 2007 To minimize the hazards associated with vacuum and pressure
INFACT CORPORATION WATERWORKS PRODUCTS FLEX T-2 SPECIFICATION S TOLL FREE:
CORPORATION WATERWORKS PRODUCTS T-2 SPECIFICATION S TOLL FREE: 888-773-9130 email: info@infactcorp.com www.infactcorp.com T-2 Valve and Fitting Restraint Lower total installed cost No couplings, no pipe
Perched Box Caisson Overview. January 2014
Perched Box Caisson Overview January 2014 Why perched box caissons? Perched box caissons are used to construct the portion of the river piers that will support the steel arch spans Construction can occur
Full Service Warehouse
DIRECT FAX (320) 235-1816 110 19th Street NW P.O. Box 1178 Willmar, Minnesota 56201 (320) 235-4070 1-800-992-8853 1-800-328-8994 Full Service Warehouse 3-D LASER SHEARING BREAKING FLAME CUTTING PLASMA
Know Your ABCs FALL PROTECTION GUIDE
Know Your ABCs FALL PROTECTION GUIDE PEAKWORKS ABCs of Fall Arrest KNOW YOUR ABCs Fall arrest systems are the collection of equipment components that are configured to arrest a fall. There are several
Originally Issued: 10/08/2010 Revised: 10/30/2015 Valid Through: 10/31/2016
EVALUATION SUBJECT: ITW ALPINE HANGERS AND ANCHORS REPORT HOLDER: ITW Building Components Group Inc. 13825 W. Business Center Dr. Unit A Lake Forest, IL 60045 (800) 521-9790 www.alpineitw.com CSI Division:
CB-40 Data Buoy Quick Start Guide
CB-40 Data Buoy Quick Start Guide The NexSens CB-40 Data Buoy offers a compact and affordable platform for deploying water quality sondes and other instruments that integrate power and data logging. The
Security and confidence at height.
A Security and confidence at height. Vertical Systems DISTRIBUTED BY M DBI-SALA Vertical Systems are designed to complement your ability to work while meeting all applicable OSHA and ANSI standards. Vertical
A COMPLETE LISTING OF OUR WASHERS BY INNER DIAMETER STARTS ON PAGE D32
A COMPLETE LISTING OF OUR WASHERS BY INNER DIAMETER STARTS ON PAGE D32 Component Flat Washers Component Flat Washers The Largest Selection in the World! Steel, Stainless Steel and Brass The standard Flatwasher
Advantage Lockers & Bike
Advantage Lockers & Bike Advantage Bike Racks & Lockers Inc. is the #1 supplier of Storage Lockers and Bike Racks to the Lower Mainland s residential construction industry. With 25+ years of experience
Now with SUPREME FRAMING SYSTEM! PRODUCT TECHNICAL GUIDE. Steel Stud Manufacturers Association
Now with SUPREME FRAMING SYSTEM! PRODUCT TECHNICAL GUIDE Steel Stud Manufacturers Association 2507 3064P Product Identification "S" and "SFS" - C-STUD/JOIST S and SFS-SECTIONS* * For "S" and "SFS" members,
Safety relief valves Type BSV-8
Data sheet Safety relief valves Type BSV-8 BSV is a standard, back pressure independent safety relief valve, especially designed for protection of small components against excessive pressure and as a pilot
NEW PRODUCTS RANGE
NEW PRODUCTS RANGE 2016-17 The new Makefast phone App, that lets you take control Tel. +44 (0)1686 629010 Fax. +44 (0)1686 626700 Email. sales@makefast.com www.makefast.com Makefast s Makeswitch App Makefast