UNI-AIR PV-3218 PV-5218 PP-5218 PPD Ventili/ Valves PNEUMATSKI UPRAVLJANI VENTILI/PNEUMATIC ACTUATED VALVES
|
|
|
- Janice Johns
- 5 years ago
- Views:
Transcription
1 3 Ventili/ Valves PV-38 3/ ventil, pneumatski upravljan s jedne strane, normalno zatvoren 3/ Pneumatic Valve, One Side Air Control, N.C. Pritisak / Pressure bar Upravljacki prit/operating Pressure bar Navoj / Thread...G /8 0 PV-58 5/ ventil, pneumatski upravljan s jedne strane 5/ Pneumatic Valve, One Side Air Control Pritisak/ Pressure bar Upravljacki prit /Operating Pressure..,5-0 bar Navoj / Thread...G /8 PP-58 5/ ventil, pneumatski upravljan 5/ Pneumatic Valve, Double Side Air Control Temperatura / Temperature...max. +60 C Pritisak / Pressure bar Upravljacki prit /Operating Pressure bar Navoj / Thread...G /8 PPD-58 5/ ventil, pneumatski upravljan s obje strane, ( 4 dominantan ) 5/ Pneumatic Valve, Double Side Air Control ( 4 dominant ) Pritisak / Pressure bar Upravljacki prit /Operating Pressure bar Navoj / Thread...G /
2 3 Ventili/ Valves 5/3 ventil, pneumatski upravljan 5/3 Pneumatic Valve, Double Side Air Control Temperatura / Temperature...max. +60 C Pritisak / Pressure bar Upravljaèki prit /Operating Pressure...,5-0 bar Navoj / Thread...G /8 -E PP-538-G/E/B -G -B 3/ ventil, pneumatski upravljan s jedne strane, normalno zatvoren 3/ Pneumatic Valve, One Side Air Control, N.C. PV-34 Pritisak / Pressure bar Upravljaèki prit /Operating Pressure...,5-0 bar Protok / Flow ( 5 bar ) l / min Navoj / Thread...G /4 0 5/ ventil, pneumatski upravljan s jedne strane 5/ Pneumatic Valve, One Side Air Control PV-54 Pritisak / Pressure bar Upravljaèki prit /Operating Pressure...,5-0 bar Protok / Flow ( 5 bar ) l / min Navoj / Thread...G /4 5/ ventil, pneumatski upravljan 5/ Pneumatic Valve, Double Side Air Control PP-54 Pritisak / Pressure bar Upravljaèki prit /Operating Pressure bar Protok / Flow ( 5 bar ) l / min Navoj / Thread...G /4 HP
3 PPD-54 5/ ventil, pneumatski upravljan s obje strane, ( 4 dominantan ) 5/ Pneumatic Valve, Double Side Air Control ( 4 dominant ) Pritisak / Pressure bar Upravljacki prit /Operating Pressure...-0 bar Protok / Flow ( 5 bar ) l / min Navoj / Thread...G /4 PP-534-G/E/B 5/3 ventil, pneumatski upravljan 5/3 Pneumatic Valve, Double Side Air Control Temperatura / Temperature...max. +60 C PritisakPressure...0 / -0 bar Upravljacki prit/operating Pressure...,5-0 bar Protok / Flow ( 5 bar ) l / min Navoj / Thread...G ¼ -E -G -B PV-3-L 3/ ventil, pneumatski upravljan s jedne strane, povrat zrakom 3/ Pneumatic Valve, One Side Air Control ( Air Return ) Pritisak / Pressure bar Upravljacki prit /Operating Pressure...-0 bar Protok / Flow ( 6 bar ) l / min Navoj / Thread...G ½ 0 3 TEHNICKI PODACI ZA PV, PP, PPD,... / SPECIFICATION Medij / fluid Zrak, filtriran 40µm, nauljen* ili nenauljen Filtered Air 40µm, lubrcated* or not Materijal Tijelo ventila / valve body...aluminium Brtve / seals...nbr Opruga / spring...inox Vreteno / spool...aluminium *Upotrebljavati samo ulje ISO VG 3 klasa *Use ISO VG Class Lubricant
4 5/ ventil, pneumatski upravljan s jedne strane 5/ Position Pneumatic Valve, one side air control YPV-5 PritisakPressure...,5 / -0 bar Protok / Flow ( 5 bar ) l / min Navoj / Thread...G ½ 5/ ventil, pneumatski upravljan 5/ Position Pneumatic Valve,double side air control YPP-5 Pritisak / Pressure...,5-0 bar Protok / Flow ( 5 bar ) l / min Navoj / Thread...G / 5/3 ventil, pneumatski upravljan 5/3 Position Pneumatic Valve, Double side control YPP-53-G/E/B Pritisak / Pressure bar Protok / Flow ( 5 bar ) l / min Navoj / Thread...G / -G -E -B TEHNICKI PODACI YPV-5,YPP-5,YPP-53 / SPECIFICATION Medij / Fluid Zrak, filtriran 0µm, nauljen* ili nenauljen Filtered Air 0mikrona, lubricated or not *Upotrebljavati samo ulje ISO VG 3 klasa *Use ISO VG Class Lubricant Materijali Tijelo ventila / Valve body...aluminium Brtve / Seals...NBR Opruga / Spring...INOX Vreteno / Spool...Aluminium Upravljacki dio / Pilot Parts...Nylon HP
5 DVV-8 Element za sigurnosno dvorucno upravljanje (CE n. 049 AT 6, EN 574 ) Double Hand Safety Component ( CE n. 049 AT 6, EN 574 ) Pritisak / Pressure bar Protok / Flow ( 5 bar )...00 l / min Navoj / Thread...G /8 Vrijeme istovremenog uklopa / Contemporary push on both butto...0,5 sek Pneumatska shema uporabe sigurnosnog dvorucnog uklopa Pneumatic Scheme how to use Double Hand Safety Component OSC-54 5/ Oscilator 5/ Oscilating Valve Pritisak / Pressure...-0 bar Upravljacki pritisak/operating Pressure..3-0bar Protok / Flow ( 5 bar ) l / min Navoj / Thread...G ¼ VZ-8-NO VZ-8-NC Satni element ( NO- normalno otvoren, NC-normalno zatvoren ) Impulse Time Generator ( NO- normally open, NC- normally closed ) Temperatura / Temperature...max. +60 C Pritisak / Pressure bar Upravljacki pritisak/operating Pressure...-0 bar Protok / Flow ( 5 bar ) l / min Navoj / Thread...G /8 Kašnjenje / Lateness... sec./max. -NC -NO
6 ILI èlan ( M5, /8 ), I èlan ( M5, /8 ) AND element ( M5, /8 ), OR element ( M5, /8 ) ILI-M5/8 I-M5/8 Navoj C Thread C M5 G /8 Pritisak / Pressure bar Protok / Flow ( 6 bar )...00 l / min Navoj / Thread...M5, G /8 Brzoispusni ventil Quick Release Valve VSC-8/4/ TIP TYP B H D L L SW Temperatura / Temperature...max. +60 C Tlak / Pressure bar Protok / Flow ( 6 bar )... smjer / way -: -(600 /8:/4:/: l/min),(00 l/min),(3300 l/min)... smjer / way -: -/8:/4:/: (650 l/min),(900 l/min),(500 l/min) Navoj / Thread...G /8, G /4, G / VSC-8 VSC-4 VSC- /8 /4 / 7,5 5 7, ,5 55 7,5 7,5 35,5 44, Nepovratni ventil Non-Return Valve VNR-M5/8/4/38/ TIP TYP VNR-M5 VNR-8 VNR-4 L 6,5 35,5 43 G M5 /8 /4 S Pritisak / Pressure bar Protok / Flow ( 6 bar ): M5:(00 l/min),g/8:(550 l/min),g/4:(000 l/min), G3/8:(00 l/min),g/(00 l/min) Navoj / Thread... M5, G /8, G /4, G 3/8, G / VNR-38 VNR /8 / 4 4 Potezni ventil 3/ Slide Valve 3/ HSV-8/4/38/ TIP TYP HSV-8 L 48 D 5 G /8 S 4 Pritisak / Protok / Pressure bar Flow ( 6 bar ): G/8:(550 l/min),g/4:(000 l/min), G3/8:(00 l/min),g/(00 l/min) HSV-4 HSV /4 3/8 7 Navoj / Thread...G /8, G /4, G 3/8, G / HSV / 6 HP
UNI-AIR YPV3218 YPV5218 YPP5218 PPD Ventili / Valves PNEVMATSKO KRMILJENI VENTILI / PNEUMATIC ACTUATED VALVES 3/2 5/2
Ventili / Valves UNI-AIR YPV3218 3/2 z ene strani, normalno zaprt 3/2 Pneumatic Valve, One Sided Air Control, N.C. Temperatura / Temperature...max. +60 C Pretok / Flow (5 bar)... 700 l/min 3 1 2 10 YPV5218
Series 4 Cv= Air-Pilot operated valves. 3-way/2-position, 5-way/2-position, 5-way/3-position
3 Cv =.73-2.00 Series 4 Cv=.73-2.00 Air-Pilot operated valves Series 4: 1/8,, 3-way/2-position; 5-way/2-position; 5-way/3-position 1/2 5-way/2-position The pneumatically operated,3-way/2-position, 5-way/2-position
Pneumatic valve islands
Pneumatic valve islands The MEGA solenoid air operated spool valve JOUCOMATIC offers a concept of solenoid air operated spool valves which can be fitted together to form islands. Due to its new patented
Compressed Air Conditioning Catalog Chapter I
Compressed Air Conditioning Catalog Chapter I 2 Compressed Air Conditioning Welcome Welcome New technologies and materials, design innovations and the integration of bus-suitable electronics have opened
INDUSTRIAL PNEUMATICS - air treatment units. FIL filter
Due to its metal construction, the entire range of NEW DEAL elements is resistant to heavy duty working conditions. Designed for high pressure application (up to 18 bar). FIL filter Degree of filtration:
Air service units series Y G1/4 to G1
Air service units series Y Series FY Filter, 12.071 Series RY+ RYP Pressure regulator, 12.076 Series FRY Filter/regulator, 12.080 Series OY Lubricator, 12.083 Series FROY Filter, Regulator, Lubricator
Pneumatic spool valve islands
Pneumatic spool valve islands P7.GB.R MEGA SPOOL VALVE ISLANDS MEGA pneumatic spool valve islands offer maximum performance along with flexibility, easy installation and simple operation. Due to their
Wide opening parallel grippers Series CGLN
CATALOGUE > s 202 Wide opening parallel grippers Series CGLN > Grippers Series CGLN Magnetic Sizes: ø 0-6 - 20-25 - 32 mm» High flexibility during mounting» High grip force» Rack and pinion synchronized
SOLENOID VALVES AND PNEUMATIC VALVES
S E R I E S 3 4 2 Electropneumatically operated valves Series 3 and 4 Series 3: G1/8, 3/2 - way and 5/2 - way Series 4: G1/8, G1/4 and G1/2 3/2, 5/2 and 5/3 - way GENERAL DATA Construction Valve group
SPCH/ Blowing block
> > for linear stretch blow moulding machines > > Compact and safe design > > Best suited for PET bottles up to litres, depending on cycle time Technical features Medium: Compressed air (purity class 3..3
Bores: ø 10, 16, 20, 25, 32 mm
> Series CGLN wide opening parallel grippers CATALOGUE > Release 8.8 Series CGLN wide opening parallel grippers New version Bores: ø 0, 6, 20, 25, 32 mm»» High installation versatility»» Rack and pinion
4/2 way Pneumatic Solenoid Valve
4/2 way Pneumatic Solenoid Valve Compact design Push-over solenoid coil Exhaust air can be regulated Tube, threaded and sub-base connections Type combined with Seat valve version Type 2508 Type 2510/11
SOLENOID VALVES AND PNEUMATIC VALVES
9 S E R I E S Electropneumatically and pneumatically operated valves Series 9 Assembly with sub-base (ISO 5599/1 Standards) Sizes 1, 2 and 3 The Series 9 electropneumatically or pneumatically operated
filtered air without lubricant. If lubricated air is used, it is recommended to use ISOVG32 oil and to never interrupt lubrication.
> Series EN valves and solenoid valves Valves and Solenoid valves Series EN, CC - CO - CP With outlets on the body - For individual or manifold assembly Size 16-19 mm» Mounting on any flat surface» Reduced
AMG. Model Note) Rated flow (l/min (ANR)) Port size Mass (kg) 1 8, , 3 8. Specifications Fluid. Element life
Water Separator Series AMG Can remove water droplets in compressed air. Use this product in cases where water must be avoided, but not so dry as when an air dryer is used. Through the adoption of an element
SPOOL VALVES. pilot operated single/dual solenoid (mono/bistable function) ISO mm - pad mounting body M12 connection
SPOOL VALVES pilot operated single/dual solenoid (mono/bistable function) ISO 07-8 mm - pad mounting body M connection x/ - / - / Series 0 ISO 07- (8 mm) FEATURES M connection on top of valve: reduces
Air-service devices, Series MU1
Electric Drives and Controls Hydralics Linear Motion and Assembly Technologies Pneumatics Service Air-service devices, Series MU1 Technical data Pressure regulator valve, MU1, G 1 Technical Data Type Operating
Suitable for anyone who is required to maintain industrial pneumatic systems. No prior knowledge of pneumatic or electrical principles is necessary.
PNEUMATICS COURSE 660: 4 DAYS: Max 8 Candidates This course provides maintenance personnel and production operators etc with the skills and knowledge necessary to carry out maintenance tasks on pneumatic
BW0500AO. ByWire Elements BW0500AO Element 4/3 with side ports IBW0500 Interface
ywire Elements Element 4/3 with side ports IW5 Interface efore use, carefully read the GENERL INSTRUCTIONS FOR USE OF DIRECTIONL CONTROL VLVES 398SW5EN - 5--8 Technical data Nominal flow 5 l/min 3. US
Valves series A1 1/2, 3/2, electrically operated
1/, 3/, electrically operated Executions 3/ NC 0113 A1E430 3/ NO 3 0 A1E431 1 3 3/ 03 A1E43 3/ NC 3/, 0137 A1K430 08 A1K43 Series of spool valves, with static seals, high flow, for panel mounting. Coils
3/2-way valve, Series CD07 Qn= 1400 l/min pipe connection compressed air connection output: G 1/4 - M14x1,5 suitable for ATEX
/-way valve, Series CD07 Version Spool valve, zero overlap Sealing principle soft sealing Working pressure min./max. -0.95 bar / 0 bar Ambient temperature min./max. -5 C / +80 C Medium temperature min./max.
MULTIPOL - VDMA. PNEUMATIC SPOOL VALVE ISLANDS VDMA ISO 02 - ISO 01 (G1/8 - G1/4) designed for connection to a PLC by multiwire cable
P8.G.R PEUATIC SPOOL VALVE ISLADS VDA - ISO - ISO (G/8 - G/) designed for connection to a PLC by multiwire cable ULTIPOL - VDA IPUT IPUT OUTPUT OUTPUT OUTPUT IPUT IPUT ULTIPOL - VDA Pneumatic spool valve
Axial piston pumps type PVC
www.atos.com Table TA16-1/E Axial piston pumps type PV variable displacement, by a full line of mechanical controls PV are variable displacement axial piston pumps for medium pressure operation, low noise
Valves, manually operated
Valves, manually operated Valves, manually operated Key features VHEM-P K/O-3-PK-3 H-3-¼-B KH/O-3-PK3 TH/O-3-PK3 F-3-¼-B Innovative Versatile Reliable Easy to mount Small and compact for a wide range of
Axial piston pumps type PVC
www.atos.com Table TA16SK-1/E Axial piston pumps type PV variable displacement, by a full line of mechanical controls PV are variable displacement axial piston pumps for medium pressure operation, low
Valves, manually operated
Valves, manually operated Valves, manually operated Key features VHEM-P K/O-3-PK-3 H-3-¼-B KH/O-3-PK3 TH/O-3-PK3 VHEM-L F-3-¼-B Innovative Versatile Reliable Easy to mount Small and compact for a wide
Hydro-Pneumatic Cylinder HPL-B / HPL-C
Ihr flexibler Problemlöser in der Fluidtechnik Hydro-Pneumatic Cylinder HPL-B / HPL-C DRUMAG GmbH Fluid Technology Glarnerstraße 2 D-79713 Bad Säckingen Telefone: +49 (0)7761 / 5505-0 Fax: +49 (0)7761
Intrinsically safe solenoid valves on/off controls - ATEX certification
www.atos.com Table E130-17/E Intrinsically safe solenoid valves on/off controls - ATEX certification valve body valve spool intrinsically safe solenoid electrical connector manual override DHW-0611/WP/6
Type Pressure Regulator. for increased air capacity. Fig. 1: Type Pressure Regulator. Mounting and Operating Instructions EB EN
Type 4708-45 Pressure Regulator for increased air capacity Fig. 1: Type 4708-45 Pressure Regulator Mounting and Operating Instructions EB 8546-1 EN Edition March 2010 Definition of the signal words used
Hand lever valves VHER
Hand lever valves VHER Hand lever valves VHER Key features Powerful Flexible Practical -M- Flow 170 3800 l/min 4/3-way valve mid-position closed mid-position exhausted mid-position pressurised Connections:
Pressure Relief Valves. SPV, SPVF direct operated
Pressure Relief Valves SPV, SPVF direct operated Construction P Ø d 1 a T c 2 3 b 4 1 Housing 2 Sliding piston 3 Compression spring 4 Set screw Bleeding screw 6 Protective cap 6 Description The pressure
Ex-proof proportional valves with integral digital drivers with or without integral position or pressure transducer - ATEX or IECEx certification
Table F650-/E Ex-proof proportional valves with integral digital drivers with or without integral position or pressure transducer - ATEX or IECEx certification valve body ex-proof solenoid ex-proof position
AIR TREATMENT FRL Series FUTURA. The New FUTURA Series offers many advantages:
IR TRETMENT FRL Series FUTUR The Futura series: the future is built in! Innovative, compact and highly efficient, the Futura series is an absolute technical highlight. The modular structure of the patented
D 042 D 062 In-line mounting Operating pressure up to 100 bar Nominal flow rate up to 90 l/min
Pressure Filters D D 6 In-line mounting Operating pressure up to 1 bar Nominal flow rate up to 9 l/min Description Application In the pressure circuits of hydraulic and lubrication systems. Performance
Mounting and Operating Instructions EB EN. Type Supply Pressure Regulator. with increased air capacity
Type 4708-45 Supply Pressure Regulator with increased air capacity Translation of original instructions Mounting and Operating Instructions EB 8546-1 EN Edition March 2016 Note on these mounting and operating
MPS/MST SPIN - ON FILTER SUCTION - RETURN SERIES. Maximum working pressure 12 bar. Flow rates to 300 l/min
MPS/MST SERIES SPIN - ON FILTER SUCTION - RETURN Maximum working pressure 1 bar Flow rates to l/min D e s c r i p t i o n MPS/MST The spin-on filter series is a complete product range suitable, for both
Basic Pneumatics. Module 9: Time delay valve. Academic Services PREPARED BY. April 2012
Basic Pneumatics PREPARED BY Academic Services April 2012 Applied Technology High Schools, 2012 Module Objectives After the completion of this module, the student will be able to: Demonstrate an understanding
Nugget 120 V14 Series
Nugget 0 V Series /2 & /3 Valves Solenoid and Pilot Operated G 1 4 High flow compact valves Sub-base and low profile manifolds Light weight, long life corrosion resistant materials Multipole and Fieldbus
Plant, components and devices for very high and high pressures (7000 bar and over)
Plant, components and devices for very high and high pressures (7000 bar and over) HIGH PRESSURE GAS BOOSTER INTRODUCTION Multi-coupling system gas booster operate on the simple but efficient principle
JRGURED Pressure reducing valves
JRG JRGURED Pressure reducing valves JRGURED 12 11 6 5 7 3 1 4 2 8 10 9 The JRGURED pressure reducing valves is a compact fitting for water systems consisting of a strainer and a pressure reducing valve.
INVERS. Solenoid coil 24VDC 12 VDC Exm Exd Explosion protection marking:
direct operated INVERSE function available Q max = 2 l/min p max = bar INVERS Description EPDB The direct operated proportional pressure relief valve is built as a slip-in cartridge fitted in a connecting
BL68 - Olympian Plus, plug-in system Filter/regulators and lubricators
>> Port size: 3/4... /2 (ISO G/ PTF) >> Complete air processing units pre-assembled, ready to install Technical features Medium: Compressed air only Maximum operating pressure: 7 bar (246 psi) Pressure
How to Order. Rc NPT 1/8 1/4 3/8 1/2
AWM 3 AWD 3 Mist Separator Regulator AWM2 to AWM4 Micro Mist Separator Regulator AWD2 to AWD4 3 E 3 E How to Order Mist Separator Regulator 1 2 Micro Mist Separator Regulator The AWM series is made up
Hand slide valves W/VBOH
Hand slide valves W/VBOH Hand slide valves W/VBOH Product range overview Version Valve function Version Type Pneumatic connection 1 Pneumatic connection 2 qnn Page/ Internet [l/min] Hand slide valves 3/2-way,
Operating instructions - Translation of the original -
Operating instructions - Translation of the original - Overflow valves Typ 5076 DN 10 - DN100 KIESELMANN GmbH Paul-Kieselmann-Str.4-10 D - 75438 Knittlingen +49 (0) 7043 371-0 Fax: +49 (0) 7043 371-125
Materials : Carbon steel ASTM A216 WCB
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 400 ( NPS 2" to 16" ) Flanges R.F. Class 150 (PN20) - 29 C + 425 C Max Pressure : 20 Bars Specifications : Removable stainless
WARNING. Work drop prevention check valves FPV series. Vacuum accessories. Safety handling of workpiece with several pads
Work drop prevention check valves series Safety handling of workpiece with several pads Enable using one CONVUM ejector and several pads, in applications where some of the suction pads may not be in contact
ALF400 to 900, ALT-5/-9
Auto Feed Lube, Auto Feed Tank 00 to 900, -/-9 Standard Specifications Auto feed lube 00 00-0 00 00 00 900 - --IS- -9 AIR : OIL : Fluid Proof pressure Air. MPa 0. MPa.0 MPa (Note ) Operating pressure differential
B84G - Excelon Plus Modular System General purpose filter/regulator
> Port size: 3/8... 3/4 (ISO G/PTF) > Excelon Plus design allows in-line installation or modular installation with other Excelon Plus products > Push to lock adjusting knob with built in tamper resistant
Gripping modules Pneumatic 2-finger parallel gripper Long-stroke gripper for small components Gripping force 120 N..
GM Sizes 85.. 205 Mass 0.48 kg.. 2.7 kg 120 N.. 595 N Stroke per finger 16 mm.. 30 mm Workpiece weight, force-fit gripping Up to 2.3 kg Application example 3 5 3 4 2 5 2 1 1 Pneumatic double pick & place
Directional valves Pneumatically operated Series CD07. Brochure
Series CD07 Brochure 2 Bosch Rexroth AG Pneumatics Series CD07 2/2-way valve, Series CD07 Qn = 1400 l/min pipe connection compressed air connection output: M14x1,5 suitable for ATEX 3 3/2-way valve, Series
Pilot Operated Check Valves
Pilot Operated Check Valves These check valves allow flow in one direction and prevent flow in the reverse direction, until operated by pilot pressure to allow free reverse flow. The specified cracking
Auto Feed Lube, Auto Feed Tank ALF400 to 900, ALT-5/-9
Auto Feed Lube, Auto Feed Tank 00 to 900, -/-9 Standard Specifications Fluid Proof pressure Operating pressure differential range (Difference between tank pressure and line pressure) Vibration resistance
Nugget 120 V14 Series
Nugget 0 V Series /2 & /3 Valves Solenoid and Pilot Operated G 1 4 High flow compact valves Sub-base and low profile manifolds Light weight, long life corrosion resistant materials Multipole and Fieldbus
4/3 Directional valve elements L8_P5 with proportional (ED-IP) control and with or without LS connections L8_P5 (ED-IP)
4/3 Directional valve elements L8_5 with proportional (ED-I) control and with or without LS connections L8_5 (ED-I) RE 1831-7 Edition: 2.21 Replaces: 7.12 7.212 Size Series Maximum operating pressure 31
USER S MANUAL BASIC HORIZONTAL OIL-LUBRICATED MICROCOMPRESSOR Reference: RCMPBH
USER S MANUAL BASIC HORIZONTAL OIL-LUBRICATED MICROCOMPRESSOR Reference: RCMPBH THIS MANUAL IS INTENDED FOR TECHNICAL STAFF IN CHARGE OF THE INSTALLATION, THE OPERATION AND THE MAINTENANCE OF THIS PRODUCT
Features BALL VALVES. Hercules - High pressure Stainless steel ball valve - high ciclicity. General features. Special execution on request.
OMAL S.p.a. Via Ponte Nuovo, 11-25050 Rodengo Saiano (BS) ITALY Phone +39 0308900145 - Fax +39 0308900423 Booked in the Enterprise Register of: Brescia number 1661640175 Share capital completely deposited:
Air service units series K G1/8, G1/4
Air service units series K Series FK Filter 12.011 Series RK Pressure regulator 12.012 Series FRK Filter/regulator 12.013 Series OK Lubricator 12.014 Series FROK Two piece air service unit 12.015 Series
TECHNICAL CHARACTERSTICS
and solenoid valves spool version GM - GL series Type of valves with dorsal consumption: GM-...series with integrated connections GL-...series without connections TECHNICAL CHARACTERSTICS Ambient temperature:
Valves ISO 5599/1 ISO 1, 5/2-5/3, electrically operated, with CNOMO pilot
ISO 1, - 5/3, electrically operated, with CNOMO pilot Executions 0300 ISO1E50 NOTE: FOR VALVES WITH PILOT IN LINE SEE PAGE.111.1 Technical data 03030 ISO1E51 03037 ISO1E5 03031 ISO1E70 0303 ISO1E71 03043
Size : Ends : Min Temperature : Max Temperature : Materials : Cast iron body
Size : Ends : Min Temperature : Max Temperature : DN 15 to DN 400 Flanges GN10/16-10 C + 120 C Max Pressure : 16 Bars up to DN 200 ( 10 bars over ) Specifications : Removable stainless steel filter Bolted
SPOOL VALVES. ISO 15407/1 - Sizes Series PA568-GB-R3. All leafl ets available at:
SPOOL VLVS ISO 07/ - Sizes 0-0 Series 8-9 P68-GB-R ll leafl ets available at: www.ascojoucomatic.com FTURS These spool valves which comply with the VDM 6 standard offer the advantage of being smaller than
Series K Air service units G 1/8, G 1/4
Air service units G /8, G /4 Series FK Filter, G /8 G /4.02 Series RK Pressure regulator, G /8 G /4.04 Series FRK Filter/regulator, G /8 G /4.06 Series OK Lubricator, G /8 G /4.08 Series FROK Two piece
Precision pressure regulators LRP/LRPS
Precision pressure regulators LRP/LRPS q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement
Modular Air Combination Units
...... 12-25 NAC1 ~ 6 series.................................. 12-16 Filter + Regulator + Lubricator NAC11 ~ 41 series.................................. 17-18 Filter/Regulator + Lubricator NAC12 ~ 62 series..................................
Flow and check valves Logic valves series 551. Brochure
Flow and check valves Logic valves series 551 Brochure 2 Flow and check valves Logic valves series 551 3/2-directional valve, low pressure operated Qn = 2-120 l/min 3 3/2-directional valve, Qn = 120 l/min
D e s c r i p t i o n
MPS Series D e s c r i p t i o n The MPS spin-on filter series is a complete product range suitable, for both suction and return applications. Utilising spin-on canisters, the MPS series are quick and
INDUSTRIAL EXCESS ESS FLOW VALVES
INDUSTRIAL EXCESS ESS FLOW VALVES H-911 SERIES FEATURES n Stainless Steel Construction n MAWP 6000 psi (413 bar) n MAWT 400 F (204 C) n Variable connection sizes (1/8 to 1/2'' & 6 to 12mm) n Cv = 0.5 ;
Description. Chassis. Cabinet. Long chassis - Type: Dimensions (mm): 2700 x 1200 x 1678
1 ITV bench is equipped with a INJETVISION vision system whose purpose is to observe and study the jets from high pressure diesel injector in inert atmosphere (nitrogen or CO2) up to 50 bar (± 0.5 bar).
Filter-Regulator-Lubricator
Models: 10671-1/2" NPT Filter 10673-1/2" NPT Regulator 10675-1/2" NPT Lubricator 10677-1/2" NPT Filter-Regulator 10679-1/2" NPT Regulator-Lubricator 10681-1/2" NPT Filter-Regulator-Lubricator Parts Page
Change-Over Pressure Filter DFDK
Change-Over Pressure Filter up to 8 l/min, up to 35 bar 3 6 4 6 4 8 33 5 66.x 66.x 99.x 3.x 3 3.x 64 3.x 396 3.x. TECHNICAL SPECIFICATIONS. FILTER HOUSING Construction The filter housings are designed
VALVES ISO 5599/1, SERIES IPV-ISV
VALVES ISO 99/1, SERIES IPV-ISV The assembly surface dimensions of ISO1 and ISO2 valves are to ISO99-1. They are available in the -way versions with 2 and 3 positions and with pneumatic or solenoid actuation.
Digital directional & flow control valves D-DF(R)G
Digital directional & flow control valves D-DF(R)G Functional Symbols Model Code D-DFG- D-DFG-~ D-DFRG-/ D-DFG--C--- Digital directional & flow control valve Size Spool type (neutral position) : ll ports
PNEUMATIC CONTROL VALVES PV25 (EN) V25G globe control valves with linear actuators PA series
PNEUMATIC CONTROL VALVES PV25 (EN) V25G globe control valves with linear actuators PA series DESCRIPTION The PV25 control valves are single seated, two-way body constructed with in-line straight connections.
AIR TREATMENT H Z E 0. Air Treatment Units CHARACTERISTICS CODIFICATION KEY. Filter. Ambient temperature Fluid Working pressure Max pressure Size Body
NEW - HZE Air Treatment Units CHARACTERISTICS Ambient temperature Working pressure Max pressure Body Knob Ring nut Bowl Bowl guard Filter element Seals Springs Diaphragm CODIFICATION KEY H Z E B 8 G +6
Basic Pneumatics. Module 2: Direct Control of single acting cylinder PREPARED BY. IAT Curriculum Unit. January 2011
Basic Pneumatics Module 2: Direct Control of single acting cylinder PREPARED BY IAT Curriculum Unit January 2011 Institute of Applied Technology, 20011 Module 2: Direct Control of single acting cylinder
Materials : Forged carbon steel A105N
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 1/4" to 2 Female - Female BSP or NPT, Socket Welding - 29 C + 425 C Max Pressure : 136 Bars (Class 800) Specifications : With draining
Air preparation units
Overview Description Page Characteristics Dimensions Order instructions Type overview unit three-piece 44, 45, 48 52 6 unit two piece 44, 45, 48 52 6 Filter-regulator 44, 45, 48 53 6 Filter-water-separator
E 212 E 222 Tank top mounting Connection up to G1¼ / -20 SAE Nominal flow rate up to 220 l/min / 58.1 gpm
Return Filters E E Tank top mounting Connection up to G¼ / - SE up to l/min / 8. gpm Description pplication In the return line circuits of hydraulic systems. erformance features rotection against wear:
Suction fi lters. SF2 500 series. Flow rate up to 800 l/min. Suction fi lters
Suction fi lters SF 5 series Flow rate up to 8 l/min Suction fi lters FILTER SIZING The correct filter sizing have to be based on the variable pressure drop depending by the application. For example, for
Cylinder Controls. Operating information. For ATEX specific products contact Sales Office. 2/2 Blockers. PDE2600PNUK Parker Pneumatic
A range of speed controls, flow controls and back pressure sensors designed to be mounted directly onto the cylinder in the optimum position for maximum performance. "Push-in" or threaded connection Multifunction
PRESSURE REDUCING VALVE EUROBRASSBLU CR FF
Scheda prodotto EurobrassBLU ENG Rev. 4 12/2014 PRESSURE REDUCING VALVE EUROBRASSBLU CR FF Direct acting brass pressure reducing valve; Part in contact with water made in DZR brass; Specific for alimentary
Axial piston pumps type PVPY-C (-R, -L) variable displacement, with mechanical controls obsolete components - availability on request
www.atos.com Table TA60obs/E Axial piston pumps type PVPY- (-R, -) variable displacement, with mechanical controls obsolete components - availability on request PVPY are variable displacement axial piston
ALF400 to 900, ALT-5/-9
uto Feed Lube, uto Feed Tank LF00 to 900, -/-9 Standard Specifications uto feed lube uto feed tank LF00 LF00-0 LF00 LF00 LF00 LF900 - --IS- -9 IR : OIL : Fluid Proof pressure ir. MPa 0. MPa.0 MPa (Note
Solenoid valves CDSV, Clean Design
Key features Innovative Versatile Reliable Proven valve technology combined with a highly resistant polymer material. valve position 2 solenoid coils Flow rate 300 650 l/min Valve width 24 mm Connected
Air operated valve. VGA342R Series
Doc. No.VG300***-OMH0006-A PRODUCT NAME Air operated valve MODEL / Series / Product Number VGA342R Series Contents Safety Instructions ----------------------------------------------------------------------------
PRESSURE REDUCING (AND CHECK) VALVES RT/RG RCT/RCG. -03/06/10 (3/8, 3/4, 1-1/4) Threaded Connections / Sub-plate Mounting
REDUING (ND HEK) VLVES RT/RG RT/RG -3// (3/8, 3/, -/) Threaded onnections / Mounting Up to MPa (5 PSI), 5 L /m in (3 U.S.GPM) Pub. E-3 Pressure Reducing Valves Pressure reducing valves are used to set
Technical Data Sheet TI-F50 Locking Units series KFH
English translation of German original Locking Units series KF Further important practical advice is given in Operating Manual BA-F50., Rod diameter 18 mm 50 mm øz 8 L 2 6 x 6 0 min. 4x30 KF 18 to KF 32,
Pilot valve PPCD04-PPRV DATA SHEET
CLSSIC ilot valve CD4-RV D SHEE 294 297 Description SVB pilot valve is a small smooth valve, based on homas Magnetes propotional pressure reducing valve, that controls a limited-flow control feed to a
EXH. Specifications. Descriptions. Min. working pressure MPa
Functional explanation Primary pressure flowed from passes through check valve on side, and flows in chamber A and B. Primary pressure also passes through pressure adjustment section and switching valve,
Cost effective. Smooth. Reliable. LOG Internal Hole Gripper
LOG Cost effective. Smooth. Reliable. LOG Internal Hole Gripper Light gripper made of very resistant polyamide with closed diaphragm system Field of Application Particularly suited to highly dynamic applications
Xpress L90LS Directional Control Valve. Catalog HY /UK December, 2001
Xpress L90LS Directional Control Valve Catalog HY17-8525/UK December, 2001 Catalogue HY17-8525/UK Technical Information Xpress - general information Xpress is a valve-customization service that enables
ADCATROL PNEUMATIC CONTROL VALVES V403 (V403 globe valves series with linear actuators PA or EL series)
TROL PNEUMTIC CONTROL VLVES V40 (V40 globe valves series with linear actuators P or EL series) DESCRIPTION The PV40 control valves are three-way valve body for mixing service. The P pneumatic actuator
Digital relief valves D-CG
Digital relief valves D-G unctional Symbols D-G- Specifications Size Maximum working pressure Rated flow Maximum flow Maximum adjustable pressure Ma Minimum control pressure Hysteresis Repeatability emperature
IN-LINE CHECK VALVES CIT-02 / 03 / 06 / 10 (1/4,3/8,3/4,1-1/4) RIGHT ANGLE CHECK VALVES CRT / CRG-03 / 06 / 10 (3/8,3/4,1-1/4)
IN-LIN HK VLVS IT- / 3 / / (/,3/8,3/,-/) RIGHT NGL HK VLVS RT / RG-3 / / (3/8,3/,-/) Up to 5 MPa (33 PSI), 3 L/min (33 U.S.GPM) Pub. - IRTIONL ONTROLS These valves allow free flow in one direction and
PVQ 13 A2 R SE 1 S 20 C-11 D
PVQ - Variable Displacement Piston Pump PVQ 13 A2 R SE 1 S 2 C-11 D 1 2 3 4 6 7 8 9 1 1 Model Series PVQ Inline Piston Pump Variable Volume Quiet Series 4 Rotation Viewed from shaft end R Right hand, standard
Pneumatic switch module 3/2-way valve (On/Off) Types P Types FP Function tested for use of the float in Ex-zone 0
Operating Manual LTIA3E Pneumatic switch module 3/2-way valve (On/Off) Types P Types FP Function tested for use of the float in Ex-zone 0 Contents 1. Safety Instructions 2. Conformity to standards 3. Technical
Pressure balanced valves (PN 25) VM 2 2-way valve, external thread VB 2 2-way valve, flange
Data sheet Pressure balanced valves (PN 25) 2-way valve, external thread VB 2 2-way valve, flange Description VB 2 and VB 2 are two-way valves designed to work with Danfoss electric actuators AMV(E) 0,
Oxygen Dialflow Meter. Instructions for Use
Oxygen Dialflow Meter Instructions for Use 702-0031.9 May 2014 1. Symbols Warning! Caution! Indicates a potentially hazardous situation which, if not avoided, could result in personal injury to the user
LMU100/200 Series. Standard Specifications
Mist Spray Unit MU/ Series Intermittent spray to cutting and press gear chains, etc. Standard Specifications Inlet air Oil tank set range Oil Dynamic viscosity of oil ( C) Oil tank capacity (cm ) mbient