KF - M W 21. 3) Applicable terminal (e.g. 11 = 110/ 05 = Bullet 5) W = Double wire --- = Single wire. 4)Applicable wire O.D (e.g. 18 = 1.
|
|
|
- Myra Maxwell
- 5 years ago
- Views:
Transcription
1 Model number identification KF - M W 21 1) Boot type (Refer to table) 2) M = Post FIT --- = PRE FIT 6) Boot Length (e.g. 21 = 21mm) 3) Applicable terminal (e.g. 11 = 110/ 05 = Bullet 5) W = Double wire --- = Single wire 4)Applicable wire O.D (e.g. 18 = 1.8mm) Boot Type Part Name KF/KFH/KFO KFF/KFFH/KFFO KP/KPH/KPO KS/KSH/KSO Applicable STRAIGHT (e.g. STO) FLAG (e.g. SFO) MALE BULLET (e.g. SGM) FEMALE BULLET (e.g. SGF) Material Data Part Name KF/KFF/KS/KP KFH/KFFH/KSH/KPH KFO/KFFO/KSO/KPO Material Type PVC SH-108VT PVC X-731TJ PVC No. 4 Burn Rate JIS K7201 UL94V-2 UL94V-0 Max. Voltage Rating 300 V 600 V 600 V Temperature Range -40 c 60 c -30 c 105 c -30 c 60 c Max. Voltage 17.1 KV 13.7 KV 25.8 KV Durability (10KV) 3.00 Seconds 3.00 Seconds Seconds Max. Elongation 400% 310% 220% Harness (Durometer A Type) UL Card No. E64155 (S) E64155 (S) E64155 (S)
2 Flag Type <KFF-M Version> E64155 (S) Dimensions(mm) Model No. Wire O.D. (mm) d1ø KFF-M /-1 KFF-M /-1 N Flag Type <KFF-187 Version> dø E64155 (S) Dimensions(mm) Model No. Wire O.D. (mm) d1ø KFF /-1 KFF /-1 Note: 1) Delivery lead times may vary depending on the product. Contact JST for details, these products are ONLY available from the following JST affiliates; J.S.T. (U.K.) Ltd, J.S.T. Belgium N.V., J.S.T. India Liaison Office, and JST-SouthAfrica.com. 2) In line with a policy of continual product development, JST reserves the right to change the specifications of the goods described in the catalogue At any time and without prior notice. These specifications comply with the latest status quo and are subject to change without any notice.
3 Flag Type <KFF-250 Version> dø E64155 (S) Model No. Dimensions(mm) dø Wire O.D. (mm) KFF / KFF /-1 KFF / KFF / KFF /-1 KFF / Note: 1) Delivery lead times may vary depending on the product. Contact JST for details, these products are ONLY available from the following JST affiliates;. J.S.T. (U.K.) Ltd, J.S.T. Belgium N.V., J.S.T. India Liaison Office, and JST-SouthAfrica.com. 2) In line with a policy of continual product development, JST reserves the right to change the specifications of the goods described in the catalogue At any time and without prior notice.
4 Insulation Sleeve & Terminal Finder Straight Type (Tab-on Type) Part Number Wire Insulation O.D.(mm) Part number Wire Insulation O.D. (mm) KF STO-0.25(*)-110N(*) KF STO-0.25(*)-110N(*) KF STO-0.5(*)-110N(*) KF STO-0.5(*)-110N(*) KF STO-01(*)-110N(*) KF STO-01(*)-110N(*) KF STO-01(*)-110N(*) KF STO-01(*)-110N(*) KF STO-01(*)-110N(*) KF STO-01(*)-110N(*) KF STO-1.0(*)-110N(*) KF STO-1.0(*)-110N(*) KF STO-1.0(*)-110N(*) KF STO-1.0(*)-110N(*) KF STO-1.0(*)-110N(*) KF STO-1.0(*)-110N(*) KF STO-41(*)-110N(*) KF STO-41(*)-110N(*) KF STO-41(*)-110N(*) KF STO-41(*)-110N(*) KF STO-1.0(*)-187N(*) KF STO-1.0(*)-187N(*) KF STO-1.0(*)-187N(*) KF STO-1.0(*)-187N(*) KF STO-01(*)-187N KF STO-01(*)-187N KF STO-01(*)-187N KF STO-01(*)-187N KF STO-01(*)-187N KF STO-01(*)-187N KF STO-41(*)-187N KF STO-41(*)-187N KF STO-41(*)-187N KF STO-41(*)-187N KF STO-41(*)-187N(*) KF STO-41(*)-187N(*) KF STO-41(*)-187N(*) KF STO-41(*)-187N(*)
5 KF STO-21(*)-205N KF STO-21(*)-205N KF STO-21(*)-205N KF STO-21(*)-205N KF STO-1.0(*)-250N(*) KF STO-1.0(*)-250N(*) KF STO-1.0(*)-250N(*) KF STO-2.5(*)-250N(*) KF STO-2.5(*)-250N(*) KF STO-2.5(*)-250N(*) KF STO-2.5(*)-250N(*) KF STO-2.5(*)-250N(*) KF STO-6.0(*)-250N(*) KF STO-6.0(*)-250N(*) KF STO-6.0(*)-250N(*) KF STO-6.0(*)-250N(*) KF STO-21(*)-250N(*) KF STO-21(*)-250N(*) KF STO-21(*)-250N(*) KF STO-61(*)-250N(*) KF STO-61(*)-250N(*) KF STO-61(*)-250N(*) KF STO-61(*)-250N(*) KF STO-61(*)-250N(*) KF STO-81(*)-250N(*) KF STO-81(*)-250N(*) KF STO-81(*)-250N(*) KF STO-81(*)-250N(*)
6 Straight Type <Tab-in type> Applicable insulation Sleeve Part Number Wire insulation O.D. (mm) Part number Wire Insulation O.D. (mm) KF STI-01(*)-110N KF STI-01(*)-110N KF STI-01(*)-110N KF STI-41(*)-110N KF STI-41(*)-110N KF STI-51(*)-250N KF STI-51(*)-250N KF STI-51(*)-250N KF STI-51(*)-250N KF STI-51(*)-250N KF STI-51(*)-250N KF STI-51(*)-250N KF STI-1.0(*)-250D(*) KF STI-1.0(*)-250D(*) KF STI-1.0(*)-250D(*) KF STI-1.0(*)-250N(*) KF STI-1.0(*)-250N(*) KF STI-1.0(*)-250N(*) KF STI-2.5(*)-250D(*) KF STI-2.5(*)-250D(*) KF STI-2.5(*)-250D(*) KF STI-2.5(*)-250D(*) KF STI-2.5(*)-250D(*) KF STI-2.5(*)-250N(*) KF STI-2.5(*)-250N(*) KF STI-2.5(*)-250N(*) KF STI-2.5(*)-250N(*) KF STI-2.5(*)-250N(*) Flag Type Soft Boot Part Number Soft Boot Insulation O.D. (mm) Terminal Part Number Terminal Insulation O.D. (mm) KFF SFO-61(*)-250A KFF SFO-61(*)-250A KFF SFO-61(*)-250A KFF SFO-1.0(*)-250N(*) KFF SFO-1.0(*)-250N(*) KFF SFO-1.0(*)-250N(*) KFF SFO-2.5(*)-250N(*) KFF SFO-2.5(*)-250N(*) KFF SFO-2.5(*)-250N(*)
7 Female Bullet Type Part Number Wire Insulation O.D. (mm) Prt Number Wire Insulation O.D. (mm) KS SGF-21T KS SGF-21T KS SGF-21T KS SGF-41T KS SGF-41T KS Bullet SGF-41T KS SGF-41T KS SGF-51T KS SGF-51T KS SGF-51T KS SGF-51T Male bullet Type Applicable terminal Part Number Wire Insulation O.D. (mm) Part Number Wire Insulation O.D. (mm) KP SGM-21T KP SGM-21T KP SGM-21T KP SGM-51T KP SGM-51T KP Bullet SGM-51T KP SGM-51T KP SGM-51T KP SGM-51T KP SGM-51T KP SGM-51T
Small packagings with 100 pcs./bag are available at additional costs! colour of insulation. colour of insulation. cross section mm 2.
Insulated cord-end-sleeves 0.14 2.5 * = DIN 46 22 part 4 material: Cu-DHP according to DIN EN 12449, : polypropylene Small packagings with 100 pcs./bag are available at additional costs! 9 length mm (l2)
XML Electromechanical Pressure Switches
Selection Guide Industrial Switches Type of installation ontrol circuits Applications Media controlled Type of operation Air, water, hydraulic oils, corrosive fluids, viscous products Fixed differential:
Primary Terminals & Connectors
Primary & Pure electrolytic copper with electro-tin plating for corrosion resistance Deep internal serrations promote firm wire grip for maximum strength Insulation (where applicable) is color coded to
Mouldings in flexible PVC
A22 Mouldings in flexible PVC PLIO Mouldings in flexible PVC Flexible PVC has long been known as one of the most economical and useful thermoplastic materials, particularly within the electrical industry.
PLIO Mouldings in flexible PVC
PLIO Mouldings in flexible PVC Flexible PVC has long been known as one of the most economical and useful thermoplastic materials, particularly within the electrical industry. Injection moulded parts in
Connection Thread M, R(PT), Rc(PT) How to Order. Applicable tube O.D. Thread. 8 ø8. ø10. ø12. ø16. Tube (Rod)
One-touch Fittings Applicable etric Size Series K2 ow to Order Connection,, Rc(PT) Symbol 2 Body White Black Color Release button ight gray Blue Accessory Name Nipple K2N Different dia. nipple Adapter
How to Order. Applicable tube O.D. Thread. 8 ø8. ø10. ø12. ø16. Tube (Rod) Straight union. T Different dia. straight. F Female connector TX Male elbow
One-touch Fittings Applicable etric Size Series K2 ow to Order Connection,, Rc(PT) Symbol 2 Body White Black Color Release button ight gray Blue Accessory Name Nipple K2N Different dia. nipple Adapter
AIT- CONNECTOR. Board-to-wire/Wire-to-wire terminal. Features. Specifications
AIT- CONNECTOR.4 terminal Board-to-wire/Wire-to-wire Features Ultra Low Profile Connector Over 3% Height uction as compared to the Standard USCAR Footprints. Variations There are multiple varieties of
TRANSFORMER BUSHING AND ACCESSORIES
TRANSFORMER BUSHING AND ACCESSORIES dada corporation BUSHING AND ACCESSORIES DC offers a wide range of Transformers s Accessories for indoor and outdoor use. DC, by translating its Technological expertise,
AIT- CONNECTOR. Board-to-wire/Wire-to-wire. Features. Specifications
AIT- CONNECTOR Board-to-wire/Wire-to-wire Features Ultra Low Profile Connector Over % Height uction as compared to the Standard USCAR Footprints. Variations There are multiple varieties of AIT- Connectors
CPTCONNECTOR. Board-to-wire. Features. Specifications
CPTCONNECTOR Board-to-wire HIT AIT AIT- HCM SHC HCH MIO CPT BMD RAD CIT GIT0P GITP HIC SNA NAC- SQS SQM SQH SQS Developed in pursuit of miniaturization and low profile as PC board connector for automobile.
8.0. Tube and Fitting Components. Product Catalogue. Version. Section PRODUCT CATALOGUE 8.0
Product Catalogue Section J Version 8.0 Tube and Fitting Components Section J Tube & Fitting Components Index Barb Tee J:11 Blank Plug J:4 Branch Tee / Stud Tee Coupling J:10 Bulkend Coupling J:5 Bulkhead
Item No.: /
mounting types; for parallel or perpendicular mounting; pin spacing mm / 0197 in; 4-pole - Item No: 769- Male connector; with CAGE CLAMP connection and fixing flanges; for screw or similar mounting types;
PRODUCT SPECIFICATION
MINI-FIT SR. SERIES 1.0 SCOPE This specification covers the 10.00 mm / (.394 in.) centerline tin and gold plated connector series, single and dual row versions in wire to wire and wire to printed circuit
Method Two Multi-Character
Multi-Character 30 Introduction markers are custom made by Partex to make identification easy and cut your costs. Available in all our standard marker profiles, there s a marker for every application.
BROEN-LAB UNIFLEX FITTINGS FOR NON-BURNING 2.0 GASES / VACUUM BROEN-LAB UNIFLEX TM FITTINGS FOR NON-BURNING 2.0 GASES / VACUUM PREMIUM LAB
BROEN-LAB UNIFLEX FITTINGS FOR NON-BURNING 2.0 GASES / VACUUM LAB TABLE OF CONTENTS Content Page Table of Content 2 Product Overview 3 BROEN-LAB-LAB UniFlex TM 4-5 Fittings for Non-burnig 2.0 Gases/Vacuum
10 - TU0425 BU Color B Black W White R Red BU Blue Y Yellow G Green C Clear YR Orange. Tubing model. Inch size (Series TIUB) Model 3.
Series -TU Tubing For general pneumatic tubing Flexible tubing Curve and Operating pressure MPa - Refer to page for Safety Instructions and pages 7 to for Fittings and Tubing.. Applicable for general industrial
OPEN ROUND SLING 60 cm (WEBBING) OPEN ROUND SLING 120 cm (WEBBING) 1.5 m ANCHOR STRAP (PVC SLEEVE PROTECTOR) Product Code: HS2/001 SLINGS
Our slings, come from years of practical experience to understand what actually works as an anchoring sling. They can be used for technical Rope Access aid climbing, to Fall Arrest and rescue anchoring
SM Models Manual Control
SM Models Manual Control Practical Choice for Solenoid-driven Pumps Models for chemical injection, high-pressure boiler feed, and outgassing fluids. Temperatures ranges (ambient and transferring liquid)
Electromechanical pressure switches
References : pages / and / page /5 Presentation Functions Pressure switches type XMX and XMA are switches for control circuits, with an adjustable differential. They are used to control the pressure of
PARTS LIST FOR ELBOWS, COUPLERS,TUBING & HOSES
PARTS LIST FOR ELBOWS, COUPLERS,TUBING & HOSES TABLE OF CONTENTS: Canada: 1-888-WALINGA U.S.A.: 1-800-466-1197 ELBOWS, TY S, GALVANIZED... 3 ELBOWS, 45, GALVANIZED... 3 ELBOWS, 90, GALVANIZED... 3 90 TY
Table for PP. over welding cool-down time 0,10 (PP) time pressure pressure in
The standard value for heating element is 210 C +/- 10 C. The smaller the pipe wall the higher the. Additional to the given force and to the welding force the moving force of the support must be added!
IECEx Certificate of Conformity
INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com Certificate No.: IECEx CML 14.0034X Issue No:
SM Models Manual Control
SM Models Manual Control Practical Choice for Solenoid-driven Pumps Models for chemical injection, high-pressure boiler feed, and outgassing fluids. Temperatures ranges (ambient and transferring liquid)
Hoses and Lances 20,000 PSI
Jetstream provides a full arrangement of hoses and flex lances for ultra high pressure waterblasting. The hoses and lances are designed to be durable and reliable for any 20,000 psi application. A large
kēlo LED Light Installation Instructions
kēlo LED Light 4005496 ETL LISTED Conforms to UL STD 676; Certified to CSA STD C22.2 #89 Installation Instructions Read all instructions before attempting to perform installation work Installation information
Pro-Tekt European Cable System. Technical Catalog
European Cable System Technical Catalog High-Performance Cables for Demanding Applications Every cable application is important, and durable, long-lasting equipment requires rugged reliability. Downtime
Differential pressure controls, Type MP 54, 55 and 55A
MAKING MODERN LIVING POSSIBLE Technical brochure Differential pressure controls, Type MP 54, 55 and 55A MP 54 and oil pressure controls are used as safety switches to protect refrigeration compressors
CCSSL35 Carry out the wiring and testing of electrical circuits and equipment
Carry out the wiring and testing of electrical circuits and equipment Overview This standard is about the basic competences that you need to wire up and test electrical equipment and circuits for the theatre
Datamate Specification. Pin Numbering. Mating Profiles. Materials. Mechanical. 3 Row 6.
Datamate Specification Materials Mechanical Mouldings: Glass-filled thermoplastic UL94V-0 Female contacts: rass shell, with eryllium opper inner contact Male contacts: Phosphor bronze Finish: See individual
Screw Terminal Block Cables
9 Screw Terminal Block s Pre-terminated s Simplify of Terminal Blocks to PLC Modules 1 Reduce setup time with cables pre-terminated for the exact PLC module in use 1 No need to make custom connectors 1
LED Directionals Helios LED light bars
LED Directionals Helios LED light bars Xenon strobe beacons 2012 Catalogue SAFETY AND WARNING LIGHTING Brought to you by a team with long experience in the development, manufacture and sale of flashing
Prewired position switches FA series
2 Prewired position switches FA series Selection diagram 01 08 10 11 1 15 1 02 external rubber gasket external rubber gasket 1 51 52 54 55 56 5 ACTUATORS adjustable lever safety adjustable lever 41 45
Pressure controls for hydro carbons, zone II applications, Type KPE
MAKING MODERN LIVING POSSIBLE Technical brochure Pressure controls for hydro carbons, zone II applications, Type KPE KPE pressure controls for use in refrigeration and air conditioning systems with hydrocarbons
CATALOGUE EXTRACT SIRCO PV. Disconnect switches for photovoltaic applications From 100 to 2000 A, up to 1500 VDC UL 98B & IEC
2013 2014 CATALOGUE EXTRACT SIRCO PV Disconnect switches for photovoltaic applications From 100 to 2000 A, up to 1500 VDC UL 98B & IEC 60947-3 Load break switches sirco-pv_058_a_1_cat SIRCO PV UL98B sirco-pv_059_a_1_cat
BEST DRESSED COMPETITIONS
BEST DRESSED COMPETITIONS There our three categories in the Best Dressed Competitions: 1. Best Dressed (Couple/Chapter), Riding Category 2. Best Dressed (Couple/Chapter), Parade Category 3. Best Dressed
Conductor Bushings Series 8174
> Current lead-in for Ex d enclosures > 1 to 72 conductors combined in one current lead-in > Series screw-in plug-in > For voltages up to max. 1 V > For size conductor up to 7 mm 2 www.stahl.de 3163E The
TYPE APPROVAL CERTIFICATE
DET NORSKE VERITAS TYPE APPROVAL CERTIFICATE CERTIFICATE NO. E-13345 This is to certify that the Terminal Block with type designation(s) ST-COMBI, ST, STS Issued to Phoenix Contact GmbH & Co. KG Blomberg,
RELAY PRODUCT GUIDE CONTENTS
RELAY PRODUCT GUIDE CONTENTS 1.0 ABOUT FUJITSU COMPONENTS 1.1 Who we are Page 2 2.0 PRODUCT LINE-UP 2.1 Automotive relays Page 3 2.2 Power relays Page 8 2.3 Signal relays Page 16 2.4 High frequency relays
SPECIFICATION SHEET. OMEGAFLEX, Ltd. TracPipe Flexible Gas Piping Specification Sheet Specification date. ProjectName
OMEGAFLEX, Ltd. TracPipe Flexible Gas Piping Specification Sheet Specification date ProjectName Model Number(s) - FGP-SS4-50 FGP-SS4-40 FGP-SS4-32 FGP-SS4-28 FGP-SS4-22 FGP-SS4-15 FGP-SS4-12 Note: This
COMPONENT SPECIFICATION M80-7XX SERIES CONNECTORS - THREE ROW
COMPONENT SPECIFICATION M80-7XX SERIES CONNECTORS - THREE ROW JUN 200 CONTENTS: SECTION TITLE PAGE Description of Connector and Intended Application 2 2 Marking of Connector and/or Package 2 3 Ratings
Pneumatic valve islands
Pneumatic valve islands The MEGA solenoid air operated spool valve JOUCOMATIC offers a concept of solenoid air operated spool valves which can be fitted together to form islands. Due to its new patented
POWER DELIVERY. Contractor Health & Safety General Terms and Conditions. Appendix B Personal Protective Equipment
Personal Protective Equipment ( PPE ): All PPE worn on IPL job sites must have ANSI and/or approval ratings. Hard hats and safety glasses with side shields (including prescription eyewear) shall be worn
STAD-D. Balancing valves Balancing valve for domestic water systems, DN Balancing valves
STAD-D Balancing valves Balancing valve for domestic water systems, DN 15-50 Balancing valves IMI TA / Balancing valves / STAD-D STAD-D The STAD-D balancing valve delivers accurate hydronic performance
STA. Double regulating valves DN 15-50
STA Double regulating valves DN -0 IMI TA / Balancing valves / STA STA The STA double regulating valve delivers accurate hydronic performance in an impressive range of applications. Ideally suited for
Differential Pressure Control Types MP 54, MP 55 and MP 55A
MAKING MODERN LIVING POSSIBLE Data sheet Differential Pressure Control Types MP 54, MP 55 and MP 55A MP 54 and MP 55 oil differential pressure controls are used as safety switches to protect refrigeration
LP31 Level Probe. 1. Safety information. 2. General product information. 3. Installation. 4. Wiring. 5. Maintenance
404151/7 IM-P40-80 AB Issue 7 LP1 Level Probe Installation and Maintenance Instructions 1. Safety information. General product information. Installation 4. Wiring 5. Maintenance IM-P40-80 Printed in the
SP/ST/SA Models Pulse-input and Analog-input Control
SP/ST/SA Pulse-input and -input Control Smart and Intuitive Operation Simple key functions and user interface for ease of operation. Range can be set between 1 and 3 strokes per minute in 1-stroke units.
Med Aire Alternating Pressure Pump and Pad System
User Manual Med Aire Alternating Pressure Pump and Pad System 14002E 14001E Symbols & Statements NOTE Indicates some tips or some information users should be aware of. CAUTION Indicates correct operating
X2 Metallized Polypropylene Film Capacitor JFV
FEATURES: Non-inductive, (UL940V-0) plastic case sealed with epoxy resin. Provides interference suppression with VDE, ENEC and UL approvals. SPECIFICATIONS: Operating Temperature -40 ~ +110 Maximum Continuous
Limit switches OsiSense XC Special For material handling applications, type XC1 AC
Presentation For material handling applications, type XC C b XC C with slow break contacts v With head for linear movement () 00_ 00_ 000_ Page / 00_ 00_ XCC XCC Page / XCC XCC / General characteristics
Differential pressure switch MP 54, MP 55 and MP 55A
Data sheet Differential pressure switch MP 54, MP 55 and MP 55A MP 54 and MP 55 oil differential pressure switches are used as safety switches to protect refrigeration compressors against low lubricating
Pneumatic spool valve islands
Pneumatic spool valve islands P7.GB.R MEGA SPOOL VALVE ISLANDS MEGA pneumatic spool valve islands offer maximum performance along with flexibility, easy installation and simple operation. Due to their
SMARTen STP Patch Cords Features
Features Patch Cords are used in the work area and cross-connect generic cabling applications Comprise a length of eight-wire flexible patch cable, terminated with two eight-position RJ-45 plugs at each
Pressure switch KP-E. Data sheet
Data sheet Pressure switch KP-E KP-E pressure switches for use in refrigeration and air conditioning systems are equipped with SPDT gold plated contacts and stainless steel bellows. The high pressure switches
SUPPLY OF ISOLATION AND APPLIANCE VALVES PTS - ISOLATION BALL VALVE
PTS - ISOLATION BALL VALVE 2 30.06.17 Issued for Corrigendum#1 AS ADE GS 1 12.04.17 Issued for Tender AS AD GS 0 06.03.17 Issued for Client s Comments AS AD GS Rev. Date Subject of revision Author Checked
JSP. MKT Series J S P -
Loose Taped Fig.1 Fig. 2 JSP Typical applications: blocking, coupling, decoupling, by-passing, interference suppression in low voltage applications (i.e.:automotive) Ød ±0.05 All dimensions are in mm.
EPIC Rectangular Connector Inserts. HBE Series. Technical Data Number of Contacts:
HBE Series HBE series inserts provide reliable termination and performance in the vast majority of medium power and control applications. Methods of termination include screw, crimp, and spring cage clamp.
EPIC Rectangular Connectors HBE Series
HBE Series The HBE series inserts are suitable for applications with high voltages and current. The inserts can be terminated in a variety of ways: screw, crimp, or spring cage clamp. TECHNICAL DATA Number
QUICK CONNECT FOR 2.0, 4.0 & 5.0 GASES
BROEN LAB QUICK CONNECT FOR 2.0, 4.0 & 5.0 ES BROEN LAB QUICK CONNECT FOR 2.0, 4.0 & 5.0 ES BROEN LAB QUICK CONNECT FOR 2.0, 4.0 & 5.0 ES LAB TABLE OF CONTENTS Content Page Table of Content 2 BROEN-LAB
Electrical Safety, Subpart K
SHARP Instructor Training Guide Training Overview: Electrical Safety, Subpart K This guide is designed to assist the instructor with the presentation of the Electrical Safety training materials. Each numbered
Ceramic Disc Capacitors Safety Standard Approved Disc Capacitor
EATURES omplying with EN 132 400 and IE 60384-14, 2nd edition, including amendment 1.1995 High reliability Vertical (inline) kinked or straight leads. APPLIATIONS Across-the-line Line by-pass Antenna coupling.
SPOOL VALVES. pilot operated single/dual solenoid (mono/bistable function) ISO mm - pad mounting body M12 connection
SPOOL VALVES pilot operated single/dual solenoid (mono/bistable function) ISO 07-8 mm - pad mounting body M connection x/ - / - / Series 0 ISO 07- (8 mm) FEATURES M connection on top of valve: reduces
MECAIR CSN RAINTIGHT ENCLOSURE CLEAN AIR SOLUTIONS PRODUCT LEAFLET
CSN RAINTIGHT ENCLOSURE CLEAN AIR SOLUTIONS GENERAL CHARACTERISTICS CONSTRUCTION FEATURES ENCLOSURE OPERATING TEMPERATURE 20 C/+60 C COVER Diecast aluminium (anodised) WEIGHT CSN 5 3.5 kg CSN 8 5 kg CSN
4-63 T UBE FITTINGS TUBING P OLYURETHANE TUBING SERIES TU P RODUCTS FOR A LIST OF STOCKED PRODUCTS, PLEASE SEE THE CURRENT SMC PRICE LIST S TOCKED
T UBE FITTINGS 4-63 P OLYURETHANE TU Flexible tubing For general industrial air and water applicatons 20m and 100m coils 8 colour option Available in metric size (TU) and inch size (TIUB) CONTACT SMC FOR
STAD. Balancing valves DN (MD60, MD61, MD62)
STAD Balancing valves DN 15-50 (MD60, MD61, MD62) IMI TA / Balancing valves / STAD STAD The STAD balancing valve delivers accurate hydronic performance in an impressive range of applications. Ideally suited
Zelio Relays RSL Slim Interface Plug-In Relays
Zelio Relays RSL Slim Interface Plug-In Relays Catalog 8501CT0901 2009 Class 8501 CONTENTS Description............................................. Page Introduction.................................................3
Amphenol. PowerLink Solar Cables. Amphenol 97 Series Connectors are UL recognized and CSA recognized.
Amphenol PowerLink Solar Cables www.amphenol-industrial.com Amphenol 97 Series Connectors are UL recognized and CSA recognized. PowerLink Solar Cables Amphenol s single conductor PowerLink Solar Cables
RoHS. WS Series Snap Action Switch. Specifications. Part Number Configurator
Applications / Markets HVAC Electrical Housewares Floor Care Appliances Specifications White Goods Vending Machines Features & Benefits Medical Equipment RoHS Contact Rating: 0.5A @ 42VDC 1A @ 24VDC 2A
HV & UHV Vacuum Products Catalogue. prov iding l ead i ng techno logy products. Seals. Tees. Gaskets. Fittings. Crosses. 5th E:d1t1on.
prov iding l ead i ng techno logy products Adaptors Bolt Sets Flanges Flexibles Gaskets Tees Fittings Crosses 5th E:d1t1on Viewports Reducers Nipples Seals HV & UHV Vacuum Products Catalogue ~ COMPONENTS
X2 Metallized Polypropylene Film Capacitor JFV
FEATURES: Non-inductive, (UL940V-0) plastic case sealed with epoxy resin. Provides interference suppression with VDE, ENEC and UL approvals. SPECIFICATIONS: Operating Temperature -40 ~ +110 Voltage Rating
XMPA12B2142 pressure sensor XMP - 12 bar - G 1/4 female - 2 NC - without control type
Characteristics pressure sensor XMP - 12 bar - G 1/4 female - 2 NC - without control type Main Range of product Pressure sensor type Pressure sensor name Pressure sensor size OsiSense XM Electromechanical
Power Unit 075. Maintain Substation Circuit Breakers
Power Unit 075 Maintain Substation Circuit Breakers The specification details the required skills, knowledge and behaviours to establish competence to carry out the maintenance of high voltage power circuit
HV Spiker Kit - CSTE. 30 th April 2014
HV Spiker Kit - CSTE 30 th April 2014 Safety Working With Cables As a cable jointer, safety is paramount when working daily with live electricity. When working with cables it is essential to know whether
stepper motor 2-phase hybrid stepper motor (bipolar) high protection class with plug or stranded wires optional with encoder / brake
stepper motor 2-phase hybrid stepper motor (bipolar) high protection class with plug or stranded wires optional with / brake / 9 www.igus.de MOT-AN-S_EN_2070# part number (not configurable, only for illustration)
SUPPLY OF ISOLATION AND APPLIANCE VALVES PTS - APPLIANCE BALL VALVE
PTS - APPLIANCE BALL VALVE 2 30.06.17 Issued for Tender AS ADE GS 1 12.04.17 Issued for Tender AS AD GS 0 06.03.17 Issued for Client s Comments AS AD GS Rev. Date Subject of revision Author Checked Approved
KMT. Thermal Mass Flowmeter. for compressed air and gases. Measuring range: Nm³/h Nm³/h
Thermal Mass Flowmeter for compressed air and gases measuring monitoring analysing KMT Measuring range: 0.32... 63 Nm³/h - 263.4... 263350 Nm³/h Accuracy: ± 1.5% of reading + 0.5% of full scale ( DN 50)
MICRO SWITCH 914CE Series
MICRO SWITCH 914CE Series Compact Limit Switch DESCRIION ll MICRO SWITCH 914CE series compact enclosed switches incorporate fluorocarbon diaphragm sealing to provide reliable protection, meeting NEM 1,
Technical Datasheet. Rigid & Retractable Pendants. Rigid Pendant
Rigid & Retractable Pendants Rigid Pendant Description Rigid pendants are intended for use operating theatres, anaesthetic rooms and similar medical locations. They are an ergonomic solution for the provision
PN LINE. Technical remarks PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN 27 PN 28 PN 29 PN 37 PN 38 PN 39 PN 40 PN 43 PN 10 8_9 10_12
PN LINE PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN 27 PN 28 PN 29 PN 37 PN 38 PN 39 PN 40 PN 43 PN 10 Technical remarks PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN
1 Overview. Pressure Measurement Transmitters for basic requirements. 1/16 Siemens FI SITRANS P220 for gauge pressure
Siemens AG 204 Overview The pressure transmitter SITRANS P220 measures the gauge pressure of liquids, gases and vapors. Stainless steel measuring cell, fully welded Measuring ranges 2.5 to 600 bar (36.3
ibridge and ibridge Ultra
2.00 mm Board to Cable Connectors ED. 06 10.2016 Catalog EA IB001 erni.com erni.cn TABLE OF CONTENTS OVERVIEW General 03 Technical Details 04 Features 05 Electrical and Mechanical Characteristics 10 Ordering
Applicable Tubing. Nylon, Soft nylon, Polyurethane, other soft plastic tubing ø4, ø6, ø8, ø10, ø12. Model TM-04 TM-06 TM-08 TM-10 TM-12
Multi-tube Holder TM Series Easy arrangement of tubing Easy tube insertion and firm fixation Possible to separate options depending on number of connection tubes Use of flame resistant resin (Equivalent
Welcome to the new Just Balls catalogue
Welcome to the new Just Balls catalogue At Just Balls we are fanatical about balls and we go to great lengths to ensure you always get the very best. Every time you buy a Just Balls product, you can rest
MULTIPOL - VDMA. PNEUMATIC SPOOL VALVE ISLANDS VDMA ISO 02 - ISO 01 (G1/8 - G1/4) designed for connection to a PLC by multiwire cable
P8.G.R PEUATIC SPOOL VALVE ISLADS VDA - ISO - ISO (G/8 - G/) designed for connection to a PLC by multiwire cable ULTIPOL - VDA IPUT IPUT OUTPUT OUTPUT OUTPUT IPUT IPUT ULTIPOL - VDA Pneumatic spool valve
Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
APPS-160 Gen 2 User Manual
APPS-160 Gen 2 User Manual Applicable Products: PN 11914406 - APPS-160 10 to 50 PSIG operating pressure PN 11918618 - APPS-160 40 to 85 PSIG operating pressure Rev 9/16/2004 Chart Ind. www-chart-ind.com
Quick Reference Guide Power Series Switches
Quick Reference Guide The Power Series employs a Quick-make/Quick-break wiping action contact mechanism. This highspeed movement reduces the teasing of the contact surfaces reducing pitting due to arcing.
Electro Controls. Pressure WattsIndustries.co.uk
Electro Controls Pressure - 07 WattsIndustries.co.uk PRESSURE AIR DIFFERENTIAL PRESSURE SWITCHES EDA.. EFS.. To monitor air flow, dirty filters, flue draught, frost on coils & level. For positive, negative,
https://www.indiamart.com/barodamouldsdies/
+91-8079453591 Baroda Moulds & Dies https://www.indiamart.com/barodamouldsdies/ We are manufacturer, trader and exporter of Epoxy Resin Cast Insulators, Bushings & other Epoxy Molded Components widely
Self Drilling Anchor System
Self Drilling Anchor System SDAS Self Drilling Anchor System NUT PLATE COUPLER ANCHOR ROD BIT Application Self drilling anchor system is mainly used in slope stabilization, tunneling pre-support, foundations
Technifit. Union Bulkhead Flow Controller. Fractional & Metric. Push-to-Connect Fittings. March 2006
Technifit TM Push-to-Connect Fittings March 2006 Male Female Elbow Tee Union Bulkhead Flow Controller Fractional & Metric PO Box 335 12740 State Route 4 Milford Center, Ohio 43045-0335 USA Phone: 937.349.4055
TreeFlex is a brand name of Safety Technology Ltd
TreeFlex is a brand name of Safety Technology Ltd SAFETY TECHNOLOGY LTD. Castle Mews, Castle Farm, Raglan, Monmouth NP15 2BT, UK Telephone:+44 (0)1291 691123 Fax:+44 (0)1291 691133 email:info@safetytechnology.co.uk
MZX. Three-Port Seat Valves SPECIFICIATIONS AND GUIDE TO SELECTION
01 These seat valves are of globe construction with a linear moving spindle and a modified parabolic characterised plug operating against the upper seat which controls flow quantity to suit the load. The
STAD. Balancing valves DN 15-50
STAD Balancing valves DN 15-50 IMI TA / Balancing valves / STAD STAD The STAD balancing valve delivers accurate hydronic performance in an impressive range of applications. Ideally suited for use on the
PRODUCT SPECIFICATION
PRODUCT SPECIFICATION Brand C.K Product Range Glue guns and accessories Catalogue number 6215, 6215A, 6216, 6218, 6219 Date 20/02/2009 Range Description Glue guns and accessories Features 6215/6215A Professional
TA-H.U.B. Centralised balancing and control ENGINEERING ADVANTAGE
Prefab units TA-H.U.B. Centralised balancing and control Pressurisation & Water Quality Balancing & Control Thermostatic Control ENGINEERING ADVANTAGE This customised balancing solution lets you balance
Alhambra Arabic design, British engineering
Alhambra Arabic design, British engineering A UNIQUE STYLE FOR ANY ENVIRONMENT / 036 / /// Unique inspiration and expertise Inspired by the original decorations of the Alhambra Palace in Granada, Spain,
1 Overview. Pressure Measurement Single-range transmitters for general applications. 1/16 Siemens FI US Edition
Siemens AG 206 Overview Design Device structure without explosion protection The pressure transmitter consists of a piezoresistive measuring cell with a diaphragm installed in a stainless steel enclosure.
EVRM-NC EVRM-6NC. delta-elektrogas.com. Safety solenoid valves for gas Manual reset - Normally closed DN10 DN300.
EVRM-NC EVRM-6NC Safety solenoid valves for gas Manual reset - Normally closed DN10 DN300 delta-elektrogas.com www.solenoid-valve.world EE166-03/17 EVRM-NC EVRM-6NC Safety solenoid valves for gas Manual