Kestrel Mine Induction Overview
|
|
|
- Jordan Montgomery
- 5 years ago
- Views:
Transcription
1
2 KES-0000-GU-TR Version#7- Kestrel Induction Kestrel Mine Induction Overview Online via the Rio Tinto College: Kestrel Surface Induction (approx. 5 hours) Rio Tinto Essentials (including Restricted Lock Holder & CRM) Site Essentials (8 modules) Standard Operating Procedures - Surface (7 modules) Please note: You will receive a Certificate of Completion which will need to be forwarded onto Mynesight for Surface Site Component Booking Online via the Rio Tinto College: Kestrel Underground Induction (approx. 3 hours) Kestrel Underground Essentials Underground Standard Operating Procedures Please note: You will receive a separate Certificate of Completion for the Underground Induction and Underground Standard Operating Procedures which will need to be forwarded onto Mynesight with the Surface Induction Certificate of Completion for Site Component Booking Onsite (Day 1): Surface Site Components (approx. 3 hours) Kestrel South Surface Familiarisation Kestrel Managers Site Preparation Session Onsite (Day 1): Underground Site Components Underground site theory (including SavOx to CABA Training) Respiratory Dust Mask Fit Testing Kestrel South Underground Familiarisation (walk out) * Kestrel North & CHPP Familiarisations are completed with your Kestrel Representative.
3 KES-0000-GU-TR Version#6- Kestrel Induction Induction Pre Requisites & Requirements Standard 11 Statement of Attainment (Passport Cards will not be accepted) Units of competencies required: RIICOM201 RIIERR205 RIIERR302 RIIGOV201 RIIOHS201 RIIRIS201 (RIIERR203 UG only) Colour copy of drivers licence (front & back) & Colour passport style photo (in JPEG format) Underground Coal Board Medical Must be signed and have chest x-ray & underground assessment noted on Section 4 Note: Mine site to be listed as Kestrel or Various. *Refer to CBM Section 4 template attached to this booking guide* Site Requirements for all Participants Hard Hat Safety Glasses (For those who wear prescription glasses, safety prescription glasses or safety over glasses must be brought to site) Hearing Protection Gloves Steel Cap Boots Reflective Taped Long Trousers and reflective taped Long Sleeve Hi-Vis Shirt Personal Red lock (office based staff are exempt) Pen Headphones (if you would prefer to use your own, otherwise a set will be provided) Additional PPE requirements for Underground Inductees Underground Belt Underground Boots Dust Mask The Surface Induction is completed as an external online course along with practical examples. The Underground Induction is completed as a combination of external online modules as well as on site modules along with practical examples. Please note: Those who have selected Re-induction on their Contractor Induction Request Form must be currently inducted at Kestrel Mine and only need to supply their current Underground Coal Board Medical with their Contract Induction Request Form for booking (unless any other induction pre-requisite documents have expired). Kestrel Mine has a Clean Shaven Policy for all Underground Personnel
4 KES-0000-GU-TR Version#0 - Kestrel Induction Induction Booking Process Access Kestrel Induction portal via kestrel.mynesight.com.au to register for the Kestrel Mine Online Induction (including accessing Contractor Induction Request Form, submitting pre-requisite documents and purchasing induction vouchers) Submission for Kestrel Online Induction via kestrel.mynesight.com.au Paperwork will then be automatically reviewed. Please Note: Coal Board Medicals are each individually reviewed by the Kestrel Health Advisor and may require a Medical Management Plan. Upon approval an will be sent with details to access and complete the Kestrel Online Induction Inductee to send Certificate of Completion/s to kestrel@mynesight.com.au Kestrel Surface Inductees will only need to submit the Kestrel Surface Induction Certificate of Completion Kestrel Underground Inductees will need to submit the Kestrel Surface Induction, Kestrel Underground Induction and Kestrel Underground Standard Operating Procedures Certificate of Completions Inductee and Vendor will receive a confirmation for the date of Site Verification. Mynesight to send Induction Attendance List and inductees pre-requisite documents, including signed Induction request form, CBM, Standard 11, Drivers License and JPEG Image to RTCA Kestrel Training Kestrel Training Department Creates SAP ID & Gallagher profile for inductee Kestrel Training Department Provides induction list for Trainer & generates Site Access Cards Inductee attends scheduled Site Preparation Session & Surface familiarisation (bookings through Mynesight mandatory) Inductee attends scheduled Underground Site remaining Theory & Familiarisation (bookings through Mynesight mandatory)
5 Kestrel Training Department Induction Coordinator: (07) or (07) Mynesight Phone:
Contractor OHS Induction. AOHS-05-GUI September 2016
Contractor OHS Induction AOHS-05-GUI-002 8 September 2016 1 About AQWEST AQWEST is a Government Trading Enterprise responsible for supplying drinking water to Bunbury. Formed in 1906 as the Bunbury Water
Course Synopsis Working at Height for General Industries Trainer/Supervisor/Rescuer/Inspector/Installer (CS WAH-TSRII)
P a g e 1 Course Synopsis Working at Height for General Industries Trainer/Supervisor/Rescuer/Inspector/Installer (CS WAH-TSRII) Course Code: WAH-TSRII Version: English 3.0 Duration: 4 Days / 36 Hours
HSP18 Personal Protective Equipment
Procedure Index Section Title 1 Introduction 2 What is Personal Protective Equipment (PPE) 3 What the Regulations require 4 Assessing the suitability of PPE 5 Thames Water minimum standards for PPE 6 General
SCOPE OF WORK, SAFETY METHOD STATEMENT & RISK ASSESSMENT
SCOPE OF WORK, SAFETY METHOD STATEMENT & RISK ASSESSMENT Prepared for:- Date:- Work Scheduled:- SCOPE OF WORK Carry out installation of flow meters / pressure sensors. Installation of flow meter procedure
NFPA 1006 Standard on Technical Rescuer Professional Qualifications, 2013 edition Chapter 7.1 Confined Space Rescuer Level I.
Section 1 - ADMINISTRATIVE GUIDELINES 1.1 Course Description: This program meets or exceeds the requirements for NFPA 1006 Standard for Technical Rescuer Professional Qualifications, Chapter 7, Level I.
How severely could the risk hurt someone?
Safe Work Method Statement No: WMS-08 Task: Install Drainage This WMS is submitted to: Project name and site address: Contact: Preparation of WMS by: Robert Raams Company: Enwon (Australia) Pty Ltd Authorised
How severely could the risk hurt someone? Low/Insignificant First aid
Safe Work Method Statement No: WMS-02 Task: Concreting, Formwork and Steel Fixing This WMS is submitted to: Project name and site address: Contact: Preparation of WMS by: Robert Raams Company: Enwon (Australia)
Environmental Health & Safety Management System
Environmental Health & Safety Management System EHS 011 PPE Revision 3 May 2016 Page 1 of 9 1.0 Scope The procedure identifies the minimum level of PPE required along with work/task specific PPE requirements
1.1 Employees are required to wear mandatory and area / task specific PPE.
1 PERSONAL PROTECTIVE EQUIPMENT (PPE) PPE is defined as all equipment which is intended to be worn or held by a person at work and which protects them against one or more risks to his health or safety.
WORK METHOD STATEMENT TERMITE PROTECTION
ORGANISATION DETAILS Organisation Name: Gedoun Constructions Pty Ltd Contact Name: Joe Gedoun ACN/ABN: 52 284 873 581 Contact Position: Director Address: PO Box 1138, Townsville QLD 4810 Contact Phone
Occupational Health Safety and Welfare. Our Policy
Occupational Health Safety and Welfare Our Policy OCUPATIONAL HEALTH AND SAFETY POLICY Management of QI Electrical Services is committed to ensuring, as far as responsibly practicable, that all employees
How severely could the risk hurt someone? Low/Insignificant First aid
Safe Work Method Statement No: WMS-0 Task: Line Marking This WMS is submitted to: Project name and site address: Contact: Preparation of WMS by: Robert Raams Company: Enwon (Australia) Pty Ltd Authorised
Syllabus for Licensable Work with Asbestos (Category C)
Syllabus for Licensable Work with Asbestos (Category C) Introduction This syllabus sets out the guidance issued by the UK Asbestos Training Association (UKATA) for the provision of licensed asbestos training
POWER DELIVERY. Contractor Health & Safety General Terms and Conditions. Appendix B Personal Protective Equipment
Personal Protective Equipment ( PPE ): All PPE worn on IPL job sites must have ANSI and/or approval ratings. Hard hats and safety glasses with side shields (including prescription eyewear) shall be worn
TEAM MEDICAL PERSONNEL - ACCREDITATION PROCEDURES
TEAM MEDICAL PERSONNEL - ACCREDITATION PROCEDURES FEDERATION INTERNATIONALE DE VOLLEYBALL Château Les Tourelles, Edouard-Sandoz 1006 Lausanne - SWITZERLAND Tel : +41 (21) 345 35 35 Fax : +41 (21) 345 35
Product Numbers & Ordering Information
Europe / Africa Product Family Miller H-Design Hi-Vis Vest Harness New comfortable lightweight high visibility vest specifically developed for use with the Miller H-Design harness, to be visible from a
SH&E Work Method Statement Concrete Cutting & Drilling Fast Cut Qld Pty Ltd, 91 Basalt, GEEBUNG PH M ABN
SH&E Work Method Statement Concrete Cutting & Drilling Fast Cut Qld Pty Ltd, 91 Basalt, GEEBUNG PH 07 3265 6537 M 0411 756 719 ABN 45 081 359 613 OHS-FRM-100 Rev 11 (07/18) Page 1 SH&EWMS No.: F-C-QLD-30
TEAM MEDICAL PERSONNEL
TEAM MEDICAL PERSONNEL ACCREDITATION PROCEDURES VERSION 2016 FEDERATION INTERNATIONALE DE VOLLEYBALL Château Les Tourelles, Edouard-Sandoz 1006 Lausanne Switzerland Tel : +41 (21) 345 35 35 Fax : +41 (21)
SH&E Work Method Statement Concrete Cutting & Drilling Fast Cut Qld Pty Ltd, 91 Basalt St, GEEBUNG QLD 4031 ph ABN:
SH&E Work Method Statement Concrete Cutting & Drilling Fast Cut Qld Pty Ltd, 91 Basalt St, GEEBUNG QLD 4031 ph 07 3265 6537 ABN: 45 081 359 613 OHS-FRM-100 Rev 11 (07/18) Page 1 SH&EWMS No.: F-C-QLD-05
SAFE WORK METHOD STATEMENT Part B
SAFE WORK METHOD STATEMENT Part B SWMS No.: 01 WORK ACTIVITY DESCRIPTION: Door Installation All FORESEEABLE OHS & ENVIRONMENTAL HAZARDS & RISKS ASSOSSIATED WITH THE WORKS MUST BE ASSESSED & ALLOCATED CONTROLS
Personal Protective Equipment. Individual Unit Function: Safety Procedure No.: SOP-0147 Page: 1 of 9
Procedure No.: SOP-0147 Page: 1 of 9 1. PURPOSE This procedure describes the minimum requirements concerning personal protective equipment for personnel who are exposed to areas or tasks where hazards
2. Ensure operator visibility. 1. Always wear personal protective equipment.
A Safe Operation Safety Tips for underground mining operations W hether you are mining gold, zinc, diamonds, coal or copper, an underground mine can be dangerous. Special precautions need to be considered
Safe Work Method Statement
Company Name: Safe Work Method Statement Site Address: Other Details: Contractor: Activity/Trade: Electrician Date: TASKS List the tasks required to perform the activity in sequence carried out. Entry
JOB SAFETY ANALYSIS. How to use the Risk Assessment Charts. Likelihood A (Almost Certain) B (Likely) C (Possible)
Page 1 of 6 How to use the Assessment Charts 1. Determine the Likelihood on the Qualitative Assessment Process Chart (pick a letter applicable to the task). 2. Determine the Consequence on the Qualitative
FREQUENTLY ASKED QUESTIONS (FAQ s) Confined Space Program
Frequently Asked Questions: 1) Who completes the confined space work risk assessment? 2) Does the air quality tester need to wear respiratory PPE for initial air quality testing? What PPE do they require?
PERSONAL PROTECTIVE EQUIPMENT PROCEDURE SOP
PERSONAL PROTECTIVE EQUIPMENT PROCEDURE SOP Page 1 of 12 1. PURPOSE & SCOPE... 3 2. DEFINITIONS... 3 3. ROLES & RESPONSIBILITIES... 3 3.1 PROJECT MANAGER (PM)... 3 3.2 PROJECT CONSTRUCTION MANAGER... 3
SH&EWMS No.: F-C-QLD-10 Revision Date: July 2018 Revision Due: July 2019
OHS-FRM-103 Rev11 (07/18) SH&E Work Method Statement Concrete Cutting & Drilling Fast Cut Qld Pty Ltd, 91 Basalt, GEEBUNG ABN 45 081 359 613 Phone: 07 3889 8827 Mobile: 0411 756 719 Page 1 SH&EWMS No.:
CPCCWHS1001 Prepare to work safely in the construction industry
CPCCWHS1001 Prepare to work safely in the construction industry Release: 1 CPCCWHS1001 Prepare to work safely in the construction industry Modification History Release Version 1 Comment Replaces superseded
IRB Crew Certificate Learner Guide. v5.3 August 2016
IRB Crew Certificate Learner Guide v5.3 August 2016 Contents Acknowledgements 3 Course introduction 4 Course outcomes... 4 Prerequisites... 4 What you need to complete this course... 4 Topic 1 Introduction
ASTFFL9 - SQA Unit Code H54L 04 Assess and estimate work required to limit damage to contents after flood
Assess and estimate work required to limit damage to contents after Overview 1 Confirm extent and nature of damage caused to contents by 2 3 ASTFFL9 1 Performance criteria Confirm extent and nature of
Summary of Standards for Key Items of PPE
Summary of Standards for Key Items of PPE This is a guide to the selection of suitable PPE. In some cases certain PPE is mandatory and forms part of a safe system of work. These are the minimum requirements
General Requirements for Personal Protective Equipment
3.10.1 OVERVIEW This section describes procedures for ensuring that employees, students and visitors are protected from hazards through the use of personal protective equipment (PPE). (WAC 296-800-160)
Environmental Health & Safety Policy Manual
Environmental Health & Safety Policy Manual Issue Date 8/24/2009 Updated: 5/8/2018 Policy # EHS-400.03 Personal Protective Equipment 1.0 PURPOSE: In order to protect the health of employees and students,
SH&E Work Method Statement Concrete Cutting & Drilling Fast Cut Qld Pty Ltd, 91 Basalt St, GEEBUNG QLD 4031 ph ABN:
SH&E Work Method Statement Concrete Cutting & Drilling Fast Cut Qld Pty Ltd, 91 Basalt St, GEEBUNG QLD 4031 ph 07 3265 6537 ABN: 45 081 359 613 OHS-FRM-100 Rev 6 (07/14) Page 1 SH&EWMS No.: F-C-QLD-01
SAFE WORK METHOD STATEMENT
SWMS No. 09 SEED COECTION Barung andcare Assoc Inc 38A Coral St, Maleny Qld, 4552 Tel: 07 5494 3151 Email: info@barunglandcare.org.au ABN: 48 562 796 065 VERSION CONTRO Original version Date of this version
Site Induction Document & Site Rules
Site Induction Document & Site Rules Event Name Diabetes Professional Conference 2018 Venue Build & Breakdown Times Prepared By Excel London, Halls S19 S23 Build; Mon 12 th March: 09:00 22:00 (space only
SAFE WORK METHOD STATEMENT Part 1
SAFE WORK METHOD STATEMENT Part 1 Company Details: Aztech Integrated Systems Pty Ltd ABN: 50 142 740 172 Director : Aaron Caruana +61 418 178 719 7/227A Brisbane Road, Labrador, QLD, 4215. Project Details:
2.5 PERSONAL PROTECTIVE EQUIPMENT (PPE)
(PPE) 1.0 INTRODUCTION 1.1 Purpose This document states the minimum requirements for personal protective equipment (PPE) for all personnel working on Port land. Some exemptions do apply as outlined in
WORK METHOD STATEMENT CARPET LAYING
ORGANISATION DETAILS Organisation Name: Gedoun Constructions Pty Ltd Contact Name: Joe Gedoun ACN/ABN: 52 284 873 581 Contact Position: Director Address: PO Box 1138, Townsville QLD 4810 Contact Phone
Safety and Infrastructure
Safety and Infrastructure July 2015 1 Introduction Dubai World Trade Centre s Health and Safety team will introduce and enforce the following mandatory requirements regarding basic Personal Protective
PERSONAL PROTECTIVE EQUIPMENT (PPE) CS-OHS-50
CS ENERGY PROCEDURE PERSONAL PROTECTIVE EQUIPMENT (PPE) CS-OHS-50 Responsible Officer: Health and Safety Business Partners / Health and Safety Specialists Responsible Manager: Head of Health and Safety
Personal Protective Equipment
Policies & Procedures Personal Protective Equipment Internal Procedure: PPE Effective Date: 7-30-18 Last Modified: 7-30-18 Approved By: Todd Barnette Purpose To establish requirements for a Personal Protective
Essential Standard No. 16. Streetworks - Short duration static works carried out from a vehicle
Key Messages Short duration static works must not exceed 60 mins, including setting up and dismantling traffic management. A vehicle or vehicles should be used whenever possible to protect the workforce.
SAFE WORK METHOD STATEMENT
SAFE WORK METHOD STATEMENT EXCAVATION OR TRENCHING Prepared for Client: Rural Construction & Maintenance Pty Ltd Project No: 1 Site: 660 Great Ocean Road, Bellbrae Date Prepared: 29/07/2015 1. RESPONSIBILITIES
SH&E Training Matrix (EMIA)
SH&E Training Matrix (EMIA) Employee ame: Location: Employee umber: Date: 1. Table 5 All Employees - EMIA Required Employee induction within one week of starting at AECOM As required by client of local
JOB SAFETY ENVIRONMENT ANALYSIS (JSEA) Working With In Situ Testing Rigs
Personnel Involved Manager Project Operators Assistant Notes re Operator/Off-Sider Training Allan McConnell In situ testing is a niche business with very few rigs in Australia. There are no specific training
ASPEC Engineering HSE Management System. Work Instruction. 1 Objective. 2 Working in confined spaces. 2.1 What is a confined space?
1 Objective This work instruction has been developed to abide by the WHS Regulations (2011) and AS/NZ 2865 Safe working in a confined space. It has been developed around Hadden s typology for risk management,
ASTFFL8 SQA - Unit Code H54K 04 Assess and estimate work required to limit damage to structures after flood
ASTFFL8 SQA - Unit Code H54K 04 Assess and estimate work required to limit damage to structures after Overview 1 Confirm extent and nature of damage caused to structures by 2 3 ASTFFL8 1 Performance criteria
ARCTIC OFFSHORE SURVIVAL TRAINING
ARCTIC OFFSHORE SURVIVAL TRAINING (MARINE SURVIVAL / OFFSHORE HELICOPTER SURVIVAL / OFSHORE EMERGENCY RESPONSE) RATIONALE & AIM Prior to actual exploration & production activities on fixed installations
EMA, Inc. SITE SAFETY PLAN
EMA, Inc. SITE SAFETY PLAN A. SITE DESCRIPTION JOB NAME: JOB NUMBER: DATE: PLAN REVISION NUMBER: SITE ADDRESS: Additional Site / Project Information: B. SCOPE OF WORK 1. 2. 3. 4. 5. 6. C. ONSITE ORGANIZATION
PERSONAL PROTECTIVE EQUIPMENT GUIDANCE
Legislation requires a workplace to identify and assess significant hazards (via a risk assessment) associated with workplace activities. The purpose of the assessment is to enable a valid decision about
National Registration Policy
National Registration Policy v2.2 November 2014 1. PURPOSE The purpose of the introduction of National Online Registration is to: a. Achieve consistency and accuracy of data collection b. Ensure compliance
PAGE 1 OF 8 HEALTH, SAFETY & ENVIRONMENTAL MANUAL PROCEDURE: S150 Personal Protective Equip. Procedure REV 5.0 8/16/2012
PAGE 1 OF 8 PURPOSE: PERSONAL PROTECTIVE EQUIPMENT PROCEDURE The proper use of Personal Protective Equipment (PPE) is an integral part of a comprehensive Health, Safety and Environmental management program.
CAL FIRE/ Riverside County Fire Department. LARRO (include copy of certificate with registration page)
CAL FIRE/ Riverside County Fire Department Rescue Systems 1 Dates: Days Times: Prerequisites: Cost for Class: Cost for Dorm room: February 26-March 2, 2018 Monday - Wednesday 0900-1800 on first day, 0800-1700
SAFE WORK METHOD STATEMENT
SAFE WORK METHOD STATEMENT WATER PUMP - PETROL Prepared for Client: Rural Construction & Maintenance Pty Ltd Project No: 1 Site: 660 Great Ocean Road, Bellbrae Date Prepared: 29/07/2015 1. RESPONSIBILITIES
University of Vermont Department of Physical Plant Personal Protective Equipment Program
University of Vermont Department of Physical Plant Personal Protective Equipment Program REVISED AND DISTRIBUTED BY: THE UNIVERSITY OF VERMONT DEPARTMENT OF PHYSICAL PLANT TRAINING AND COMPLIANCE OFFICE
Level 4 Certificate in Asbestos Removal for Contract Managers
Level 4 Certificate in Asbestos Removal for Contract Managers January 2012 This qualification has a Credit Value of SEVENTEEN Guided Learning Hours: 94 Ofqual Qualification Number: 600/4478/0 Description
PPE and Tools PPE and Tools
PPE and Tools PPE and Tools PPE Definition Personal protective equipment (PPE) refers to protective clothing, helmets, goggles, or other garments or equipment designed to protect the wearer's body from
PERSONAL PROTECTIVE EQUIPMENT (PPE) CS-OHS-50
CS ENERGY PROCEDURE FOR PERSONAL PROTECTIVE EQUIPMENT (PPE) CS-OHS-50 Responsible Officer: Group Manager Health Safety Security and Environment Responsible Executive: Chief Executive Officer (CEO) DOCUMENT
SAFE WORK METHOD STATEMENT
SAFE WORK METHOD STATEMENT AUGER / POST HOLE DIGGER Prepared for Client: Rural Construction & Maintenance Pty Ltd Project No: 1 Site: 660 Great Ocean Road, Bellbrae Date Prepared: 29/07/2015 1. RESPONSIBILITIES
ATHLETE RUN GUIDE. 1 P a g e
ATHLETE RUN GUIDE 1 P a g e CONTENTS Contents CONTENTS... 2 ATHLETES CHECK LIST... 4 Event Day... 4 EVENT SCHEDULE... 5 VENUE... 6 RACE INFORMATION... 7 Check In... 7 Changes... 7 Race Bib... 7 Bag Drop...
PERMIT-REQUIRED CONFINED SPACE PROGRAM NOTE:
1 PERMIT-REQUIRED CONFINED SPACE PROGRAM NOTE: This Recommended Industry Safety Practice (RISP) is intended solely as an introduction and guide to an OSHA mandated Permit Required Confined Space Program.
Job Hazard Analysis Form (JHA)
Job Hazard Analysis Form (JHA) This form can be used by all Sanford Underground Research Facility (SURF) employees as well as contractors, subcontractors, and science collaborators. This is a dynamic document
UETTDRRF06B PERFORM RESCUE FROM A LIVE LV PANEL LEARNER GUIDE
UETTDRRF06B PERFORM RESCUE FROM A LIVE LV PANEL LEARNER GUIDE TABLE OF CONTENTS Review Log... 4 Module Basis... 4 1.1 Introduction... 5 1.2 Identify And Control Risks And Hazards... 6 1.2.1 Risk Management...
SH&EWMS No.: F-C-QLD-14 Revision Date: July 2018 Revision Due: July 2019
SH&E Work Method Statement Concrete Cutting & Drilling Fast Cut Qld Pty Ltd, 91 Basalt, GEEBUNG ABN 45 081 359 613 Phone: 07 3265 6537 Mobile: 0411 756 719 OHS-FRM-100 Rev 11 (07/19) Page 1 SH&EWMS No.:
CHAPTER 37: EQUIPMENT TRAINING CERTIFICATION
CHAPTER 37: EQUIPMENT TRAINING CERTIFICATION EQUIPMENT TRAINING CERTIFICATION INTRODUCTION Prior to any JTT worker operating a piece of equipment, they must be properly trained on the applicable piece
New Licensed Asbestos Manager Training
TRAINING SYLLABUS LICENSED WORK WITH ASBESTOS New Licensed Asbestos Manager Training This unit has twenty-three learning outcomes. 1. Recognise the types, uses and risks of asbestos containing materials
SWMS No 012 Samark North Qld Pty Ltd ABN : Electrical Contractors License C37121 Page 2 of 6
Samark North Qld Pty Ltd SWMS SWMS No 0 Samark North Qld Pty Ltd ABN : 99 08 98 87 Electrical Contractors License C37 Page of 6 Safe Work Method Statement Title: SWMS:0 INSTALLING LIGHT POLES Work Method
HSE - PERSONAL PROTECTIVE EQUIPMENT (PPE)
Date Adopted: 2007 Current Date: April 2015 Due for Review: April 2017 Division: Health, and Environment HSE - PERSONAL PROTECTIVE EQUIPMENT (PPE) 1. PURPOSE To establish a procedure for personal protective
WH&S Act 2011 & Regulations 2011, Environmental Protection Act and Regulations
Workplace Address: Page 1 of PART 1: TASK DETAILS Client: JOB/TASK: Using Water blaster PART 2: RESOURCES Relevant Legislation/Codes Practice: Training Required: Equipment Used: Materials Used: Substances
epsp Instructions for the Theatre Academy s Doctoral Candidates
epsp Instructions for the Theatre Academy s Doctoral Candidates 1. Login to WebOodi (https://teak-weboodi.it.helsinki.fi/teak/) using your own user id (same as your email). 2. Select PSP from the left
Standard Reference Document OPERATING STANDARD 3 PERSONAL PROTECTIVE EQUIPMENT (PPE) AND CLOTHING STANDARD OS 3
Standard Reference Document OS 5 OPERATING STANDARD 3 PERSONAL PROTECTIVE EQUIPMENT (PPE) AND CLOTHING STANDARD OS 3 SAFE LOAD PROGRAM The contents, concepts and information in this operating standard
Activity Hazard Analysis. Final Review: Dr. R. Von Burg
Appendix C Activity Hazard Analysis Mobilization/ Demobilization Physical injury from heavy equipment; heavy lifting, pinch points; slip, trip, and fall hazards Brush Clearing Cuts, slashes, dismemberment.
IPC Shooting Referees Manual
IPC Shooting Referees Manual 1 GENERAL 1.1 For the achievement of its purposes the IPC Shooting licenses referees to supervise shooting competitions and to ensure the fair and equal treatment of all competitors.
STReSS Laboratory Safety Training Memorandum
STReSS Laboratory Safety Training Memorandum STReSS Laboratory October 3, 2013 Introduction This memo outlines the policy regarding safety, safety gear, clothing requirements, crane operation, and hydraulic
Holing Underground An
John Coughlan Kestrel Mine Holing Underground An Example of the Swiss-Cheese Model August 2014 Location 50 km north east of Emerald Rio Tinto purchased in 1999 Extension opened October 2013 Kestrel Incident
TRAINING PRICE LIST. TRAINING TEAM
TRAINING PRICE LIST TRAINING TEAM 01702 561818 info@mark1training.co.uk Why choose Mark One Training? Training centres in Southend and Chelmsford Experienced and knowledgeable trainers Group discounts
Chapter 5 Personal Protective Equipment (PPE)
Chapter 5 Personal Protective Equipment (PPE) OVERVIEW: This chapter provides information about specific items and/or categories of personal protective equipment used to protect and shield you from injury
2015 KMU OVERHEAD ELECTRIC DISTRIBUTION WORKSHOP
2015 KMU OVERHEAD ELECTRIC DISTRIBUTION WORKSHOP SEPT. 30 - OCT. 2, 2015 MCPHERSON, KANSAS 2015 KMU OVERHEAD ELECTRIC DISTRIBUTION WORKSHOP SEPT. 30 - OCT. 2, 2015 MCPHERSON, KANSAS KMU is pleased to offer
Contents What is a Relay Team?... 3 Relay Team Changes Prior to Race Day:... 3 Relay Registration:... 4 Timing and Chip Transfer Rules:...
Relay Team Manual Contents What is a Relay Team?... 3 Relay Team Changes Prior to Race Day:... 3 Relay Registration:... 4 Timing and Chip Transfer Rules:... 6 Relay Team Cut-Off Times:... 7 Tattoos:...
Working Safely on Overhead Lines
A practical guide to Working Safely on Overhead Lines W.S. ON OVERHEAD LINES.indd 1 17/12/07 10:58:31 A practical guide to Working Safely on Overhead Lines National Grid Eakring Technical Training Centre
AN OFFICIAL BOWLS AUSTRALIA PUBLICATION. Logo Policy Document LOGO POLICY
AN OFFICIAL BOWLS AUSTRALIA PUBLICATION Document bowls australia LOGO POLICY 3 Table of contents Introduction Introduction... 3 1. Licensed categories... 4 i. Team wear...4 ii Non-team wear...6 iii Outerwear...8
Point Lonsdale Surf Life Saving Club BRONZE MEDALLION CAMP
Dear Camp Applicant, This pack has been collated to provide you with information about our club s Surf Lifesaving Bronze Medallion Camp, costs, conditions of admission, and details about the application
Texas Handgun License to Carry Certification Course
Texas Handgun License to Carry Certification Course 8:00 AM to 2:30 PM (Ending Time is Approximate) Location: Agenda: (Note: Order and time length of Topics may change depending upon class size/makeup
AN OFFICIAL BOWLS AUSTRALIA PUBLICATION. Logo Policy Document LOGO POLICY
AN OFFICIAL BOWLS AUSTRALIA PUBLICATION Logo Policy Document bowls australia LOGO POLICY Table of contents Introduction... 3 1. Licensed categories... 4 i. Team wear...4 ii Non-team wear...6 iii Outerwear...8
CONTRACTOR WHS HAZARD STANDARD HAZARDOUS CHEMICALS EXTERNAL USE ONLY
CONTRACTOR WHS HAZARD STANDARD HAZARDOUS CHEMICALS EXTERNAL USE ONLY Principles in the Optus Contractor WHS management process CONTRACTOR MANAGEMENT STAGES PRINCIPLES THIS STANDARD REQUISITION Requisition
HAZARD IDENTIFICATION AND RISK ANALYSIS RECORD
HAZARD IDENTIFICATION AND RISK ANALYSIS RECORD Location: Company Wide Date of Assessment: 04 April 2017 Revision No.: 0 Description of planned work or activity: HIRA Register Attendees: see attached tool-box
This new and enhanced approach to training new football referees will, without doubt, better prepare the candidate for the role as a referee.
The start of the new football season sees a fresh and pioneering new approach to the training of new referees, with it being primarily focussed on the practical training and learning of the skills required
Automatic LN2 Fill Station Instructions
Automatic LN2 Fill Station Instructions Roger Robbins 6/7/2010 Introduction: This is a step by step pictorial instruction document on how to fill a portable Liquid Nitrogen (LN2) Dewar from the Automatic
R2D2P. Working group report
R2D2P Working group report Working group members: Clédola Cassia Oliveira de Tello (Brazil), Farouk Abdel-Rahman (Egypt), Ibrahim Muhamad (Malaysia), Milan Vujovic (Serbia), Quang Huy Pham (Vietnam) Team
BRONZE CAMP Season 2012/2013
Dear Lifesaving Bronze Applicant, This information pack has been collated to provide you with information regarding the camp itself as well as details about conditions of admission and prices. Information
We currently conduct the Underwater Skills Program as follows:
529 Upper Sherman Avenue Hamilton, Ontario L8V 3L9 905.385.0300 www.recandtekscuba.com mitch@recandtekscuba.com 2018 JOINING INSTRUCTIONS We currently conduct the Underwater Skills Program as follows:
British Canoeing Quality Mark Logo Guidelines
British Canoeing Quality Mark Logo Guidelines British Canoeing Quality Mark The British Canoeing Quality Mark is an accreditation for organisations providing paddlesport activities. Accreditation runs
SH&EWMS No: F-C-QLD-23 Revision Date: July 2018 Revision Due: July Brief Description of Work Activity: Use Petrol Hand Saw / Ring Saw
SH&E Work Method Statement Concrete Cutting & Drilling Fast Cut Qld Pty Ltd, 91 Basalt St, GEEBUNG 4034 ABN 45 081 359 613 Phone: 07 3265 6537 Mobile: 0411 756 719 OHS-FRM-100 Rev 11 (07/18) Page 1 SH&EWMS
Circular 02/ No: 02/17-18 (Version 2.0) From: Coastal Safety and Learning & Development
Circular 02/17-18 No: 02/17-18 (Version 2.0) To: From: Subject: Summary: Lifesaving Managers and Directors, Education Managers and Directors Coastal Safety and Learning & Development SKILLS MAINTENANCE
Minimum Safety Requirements for Contractors Working on Railway Property
Minimum Safety Requirements for Contractors Working on Railway Property Effective_ April 1, 2007 Introduction Canadian Pacific is committed to provide a Safe and Healthy working environment for all Railway
Queensland Mining Industry Occupational Safety and Health
Queensland Mining Industry Occupational Safety and Health Innovation Awards 2003 Company: Site: Pacific Coal Pty Limited Kestrel Mine Innovation Title: A.S.E Vest (Austin s Support & Equipment Vest) Contact
PART 4: IMPLEMENTATION & OP
TITLE PART 4: IMPLEMENTATION & OPERATION Prepared by: 4.2 Personal Protective Equipment (PPE) Learning Objectives To define what is Personal Protective Equipment (PPE). To describe the management & legal
Safety, health and environment values that are expected of all persons who are working and visiting the Quattro Ports Port Kembla Grain Terminal,
Overview In accordance with the Quattro Ports Safety, Health and Environmental Policy - Safety First is paramount to Quattro Ports. Our employees and contractors are our most important asset and their
CONTRACTOR WHS HAZARD STANDARD CONFINED SPACE EXTERNAL USE ONLY
CONTRACTOR WHS HAZARD STANDARD CONFINED SPACE EXTERNAL USE ONLY Principles in the Optus Contractor WHS management process CONTRACTOR MANAGEMENT STAGES PRINCIPLES THIS STANDARD REQUISITION Requisition WHS