GT 2 Timing Belt Pulleys - 3 mm Pitch ALUMINUM .407 SET SCREW O.D. B C. B Bore O.D.* F.D.
|
|
- Annis Skinner
- 5 years ago
- Views:
Transcription
1 GT Timing elt Pulleys - 3 mm Pitch TRU MTRI PROFIL LUMINUM OUL OR NO FLNG / ST SR.8 / ST SR ST.7 SR / F.. F MTRIL: luminum lloy FINISH: lear nodized atalog Number F F F F F F F F F F F F F F F F F F F0608 of P * F.. ± / ore +.00 FOR 6 mm LTS (. INH) ia. ± / NF / NF NF NF / NF NF NF /64 / NF NF NF /64 / NF NF NF /64 / NF NOT: ll pulleys have set screws at 90. * Tolerance from 6 to 6 grooves is +.00,. 8 to 50 grooves is +.003,. 56 to 80 grooves is +.004,. For pulley stock and flanges, see Section Length ± /64 9/6 3/3 3/ Proj. 5/64 #6- TIMING PULLYS INH
2 GT Timing elt Pulleys - 3 mm Pitch PROFIL LUMINUM OUL OR NO FLNG FIRLO HU P SR P SR P SR F.. F FOR 9 mm LTS (.354 INH) MTRIL: luminum lloy FINISH: lear nodized atalog Number F F F F F F F F F F F F F0908 of P * F.. ± / ore +.00 Length ± /64 ia. ± /64 Proj. ap 653-0NF NF NF NF NF NF NF NF NF NF NF NOT: Other sizes available on special order. * Tolerance: 8 to 6 grooves is +.00,. 30 to 50 grooves is +.003,. 56 to 80 grooves is +.004,. -0 RV: J
3 GT Timing elt Pulleys - 3 mm Pitch TRU MTRI PROFIL LUMINUM OUL OR NO FLNG / ST SR. / ST SR ST SR / F.. F... 3 MTRIL: luminum lloy FINISH: lear nodized atalog Number F F F F F F F F F F F F F F F F F F F NF NF NF NF NF NF NF NF NF NF NF NF NF NF090 F.. P.. * ore ± / of NOT: ll pulleys have set screws at 90. * Tolerance from 6 to 6 grooves is +.00,. 8 to 50 grooves is +.003,. 56 to 80 grooves is +.004,. For pulley stock and flanges, see Section 4. 0 FOR 9 mm LTS (.354 INH) Length ± /64 ia. ± / Proj. 5/64 #6- #8/3 #8/3 #8/3 #8/3 #8/3 TIMING PULLYS INH
4 GT Timing elt Pulleys - 3 mm Pitch MOL ITH INSRT TRU MTRI PROFIL OUL FLNG /4 /8 ST SR /4 9/64 ST SR F.. * F.. /6 7/6 SPOT RILL 7/6 SPOT RILL FOR 9 mm LTS (.354 INH) atalog Number 6Z53-06F0906 6Z53-07F0906 6Z53-07F0908 6Z53-08F0906 6Z53-08F0908 6Z53-09F0906 6Z53-09F0908 6Z53-00F0906 6Z53-00F0908 6Z53-0F0906 6Z53-0F0908 6Z53-05F0908 6Z53-05F090 6Z53-05F09 6Z53-08F0908 6Z53-08F090 6Z53-08F09 MTRIL: Pulley - Polycarbonate, Fiberglass Reinforced Insert - luminum, Knurled of P.. F ore ia. 7/6* ia. */4" long insert in hub end only. ontinued on the next page.7.06 / / TIMING PULLYS INH 03
5 GT Timing elt Pulleys - 3 mm Pitch MOL ITH INSRT TRU MTRI PROFIL OUL FLNG /4 9/64 ST SR 5/3 ST SR F.. F.. 3/6 SPOT RILL 7/6 3/6 SPOT RILL 7/6 FOR 9 mm LTS (.354 INH) atalog Number 6Z53-03F0908 6Z53-03F090 6Z53-03F09 6Z53-0F0908 6Z53-0F090 6Z53-0F09 6Z53-0F0908 6Z53-0F090 6Z53-0F09 6Z53-048F0908 6Z53-048F090 6Z53-048F09 6Z53-060F090 6Z53-060F09 6Z53-060F096 6Z53-07F090 6Z53-07F09 6Z53-07F096 6Z53-080F090 6Z53-080F09 6Z53-080F096 MTRIL: Pulley Polycarbonate, Fiberglass Reinforced Insert luminum, Knurled of P F ore +.00 ia. / / / / 5/8 ia. #0-3 5/8 # /8 #0-3 TIMING PULLYS INH 04
6 GT Timing elt Pulleys - 3 mm Pitch MOL ITH INSRT TRU MTRI PROFIL SINGL OR NO FLNG 7/6 3/6 5/3 ST SR 3/6 / 3/6 ST SR F.. SPOT RILL SPOT RILL FOR 9 mm LTS (.354 INH) atalog Number 6Z53-084SF090 6Z53-084SF09 6Z53-084SF096 6Z53-096SF090 6Z53-096SF09 6Z53-096SF096 6Z53-0NF09 6Z53-0NF096 MTRIL: Pulley Polycarbonate, Fiberglass Reinforced Insert luminum, Knurled of P.. F.. SINGL FLNG NO FLNG ore +.00 ia. 5/8 5/8 ia. #0-3 5/8 #0-3 #0-3 TIMING PULLYS INH id You Know? That pricing for any component in this catalog is available through the Sales epartment? Simply call, fax, or write in your request for a quote for any component that you think you might want to use in your design. TL: FX:
7 GT Timing elt Pulleys - 3 mm Pitch MOL TRU MTRI PROFIL OUL FLNG /4 /4 F.. F.. F.. 7/6 3/6 7/6 3/6 7/6 3 FOR 9 mm LTS (.354 INH) MTRIL: Polycarbonate, Fiberglass Reinforced atalog Number 6L53-06F0906 6L53-07F0906 6L53-08F0906 6L53-09F0906 6L53-00F0906 6L53-0F0906 6L53-05F0908 6L53-08F0908 6L53-03F0908 6L53-0F0908 6L53-0F0908 6L53-048F0908 6L53-060F090 6L53-07F090 6L53-080F090 (Solid) 3 of P NOT: Pulleys with 6 to 8 grooves do not have webs F ore ia. TIMING PULLYS INH 06
230 kv Aluminum Welded Terminal Connectors
230 kv luminum 230 kv luminum Welded TYPE 15950, 15960 Flexible Rope Lay ssemblies luminum flexible rope lay assemblies are designed to connect to aluminum or copper pads. Pads conform to NEM standards.
More informationFeatures. Points to observe during use. SRT SRTB SRT-C Ratchets Pawls. Gears. Spur. Helical. Gears. Internal. Gears. Racks
SRT SRTB Features Characteristics of and A simple structure used to restrict the rotational direction in one-way. The tips of pawls and the teeth of ratchets are induction hardened and therefore have superior
More informationIDLERS AND TENSIONERS
ILRS N TNSIONRS To compete in today s global marketplace, you need a supplier who can provide precision idlers and tensioners that meet your quality, cost, and delivery requirements. This is why you rely
More informationCasters 2. 8 Casters for many standard institutional wheelchairs
asters 2 W o r d b o u t a s t e r w h e e l s Most standard institutional wheelchairs use 8 casters with a 2-3/8 hub length to fit within most common forks. The front axle for these casters will be either
More informationENGINE/ PUMP ADAPTERS
ENGINE/ PUMP PTERS Hayes Manufacturing, Inc. Fife Lake, MI 9633 Phone: 23-879-3372 Fax: 23-879-330 TRNSMISSION PROUTS Fife Lake, MI 9633 Phone: 23-879-3372 Fax: 23-879-330 Table Of ontents Engine/ Mount
More informationAVAILABLE BARB STYLES
STRAIGHT THROUGH PG-49 STRAIGHT THROUGH REDUCER PG-50 Large tube-to-tube fittings encompass sizes fitting tubing IDs between 3/8 (9.5 mm) and 1.0 (25.4 mm). They are available from stock in 3 barb styles,
More informationOPTIONS. Mounting ACCESSORIES FLEXAC.CLIP FLEXAC.EC FLEXAC.P6 FLEXAC.4.C04 FLEXAC.4.C10 PERFORMANCE
FLEX 4 FLEX features driver-less LE technology R9 Values of 60+ Optically clear thermoplastic coating rated for IP65, interior or exterior This product can run up to 100 ft from a single feed with uniform
More informationEqualizing Check Valves
qualizing heck Valves WR- qualizing heck Valve (ottom ) Sizes. /. /. qualizing heck Valves are sometimes called Standing Valves allowing full fluid flow in the opposite direction (upward). The WR- seats
More informationIntru-lok Flareless Bite Type Fittings
Intru-lok Flareless Bite Type Fittings 4300 atalog Flareless Bite Type Fittings Nuts, Ferrules, Inserts BIP Knurled Nut BI2 Nut BTI2 Nut and Ferrule TI2 Ferrule TIP Expander / Insert T23UI Insert HBI2
More informationINSTRUCTIONS: Tension Pulley 200 (LBD-200) Date: Check: 05 TENSION PULLEY 200
TENSION PULLEY 200 1- INSTRUCTIONS FOR USE AND MANTEINANCE 2- ASSEMBLY HANDBOOK - 1 - 1- INSTRUCTIONS FOR USE AND MANTEINANCE All the components are very simple and do not need a special maintenance. The
More informationCATALOG FOR PRESSURE CONTROL EQUIPMENT Supplement 1 API TOP CONNECTORS TRADEMARK WOODCO BUY THE BRAND REG. U.S. PATENT OFFICE MANUFACTURER
ATALOG FOR PRESSURE ONTROL EQUIPMENT Supplement 1 API TOP ONNETORS This catalog supplement provides detailed information about API Top onnectors manufactured by. You will find the equipment listed by Flange
More informationSECTION 5 CONVEY LINE & CONVEY LINE ACCESSORIES Tubing and Pipe
SETION 5 ONVEY LINE & ONVEY LINE ESSORIES Tubing and Pipe TUING ND PIPE STRIGHT LENGTHS vailable in cut-to-length; 20-ft to 40-ft random lengths vailable in: galvanized steel MTERIL FORM ITEM NUMER DESRIPTION
More informationILLUSTRATED PARTS LIST MFG. ID NO CUSTOMER CATALOG NO. MRT6 PRODUCT NO
ILLUSTRATED PARTS LIST MFG. ID NO. 600020 CUSTOMER CATALOG NO. MRT6 PRODUCT NO. 60 00-2 532 44 6-04 HANDLE ASSEMBLY 6 44 43 2 42 4 2 3 0 42 27 42 45 5 2 6 20 handle_assy_06 532 8 4-82 Control, Throttle
More informationEXCEL SELF-ALIGNING BEARINGS AND POWERTRAX LBB BEARINGS
TM S-ININ INR RINS & PIOW OKS 2/3 X S-ININ RINS N POWRTRX RINS X RINS X INR RINS esigned to fit into precision bores, these bearings are self aligning and offer long life. Precision hardened and ground
More informationROAD Wheel Set. Dealer's Manual WH-9000-C24-CL WH-9000-C24-TL WH-9000-C35-CL WH-9000-C35-TU WH-9000-C50-CL WH-9000-C50-TU WH-9000-C75-TU
(English) DM-WH0002-00 Dealer's Manual ROAD Wheel Set WH-9000-C24-CL WH-9000-C24-TL WH-9000-C35-CL WH-9000-C35-TU WH-9000-C50-CL WH-9000-C50-TU WH-9000-C75-TU WH-RS21 WH-RS61 CONTENTS IMPORTANT NOTICE...
More informationASTM A182 STAINLESS HIGH PRESSURE FITTINGS INDEX
STM 182 STINLESS HIH PRESSURE FITTINS INEX 90 ELOW / ROSS / TEE / 45 ELOW - SOKET 46 OUPLIN / HLF OUPLIN / P - SOKET 47 90 ELOW / ROSS / TEE / 45 ELOW - THREE 48 OUPLIN / HLF OUPLIN / P - THREE 49 REUIN
More informationNitro. Quality Power Transmission Products Division of Belarus Tractor International
Division of Belarus Tractor International Quality Power Transmission Products 800-356-2336 Table of Contents Standard ANSI Single Strand: Page 3 Double Strand: Page 4 Triple Strand: Page 5 Quadruple Strand:
More informationUNITED E-X-T-E-N-D-E-D Range
UNITED E-X-T-E-N-D-E-D Range Drill Jig Bushings For Heavy Duty Applications requiring Bushings of standardized dimensions larger than those provided by the A.N.S.I. standard Bushings. LOCK SCREWS and ROUND
More informationReinforced connecting pin. Silver. 6.5mm. Black. 7.1mm
- SERVICE INSTRUCTIONS SI-R70C t Rear Drive System Before use, read these instructions carefully, and follow them for correct use. WARNING Use neutral detergent to clean the chain. Do not use alkali-based
More informationRear Drive System SERVICE INSTRUCTIONS SI-R920A WARNING. Note Always be sure to use the sprocket set bearing the same group
- SERVICE INSTRUCTIONS SI-R90A t Rear Drive System Before use, read these instructions carefully, and follow them for correct use. WARNING Use neutral detergent to clean the chain. Do not use alkali-based
More informationRear Drive System SERVICE INSTRUCTION. Specifications SI-R670B
- SERVICE INSTRUCTION SI-R670B t Rear Drive System Before use, read these instructions carefully, and follow them for correct use. In order to realize the best performance, we recommend that the following
More informationMedium Pressure Valves, Fittings and Tubing Pressures to 21,000 psi
Medium Pressure Valves, ittings and Tubing MXMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed
More informationA L T R A I N D U S T R I A L M O T I O N. Synchronous Drives
A L T R A I N D U S T R I A L M O T I O N Synchronous Drives SYNCHRONOUS SPROCKETS & BELTS SECTION C1 C1 1 FEATURES OF SYNCHRONOUS BELT DRIVES Positive Slip-Proof Engagement Because the teeth of the Synchronous
More information09/17/2007 Copy VISIT THE LIFETIME WEB SITE:
VISIT THE LIFETIME WEB SITE: WWW.LIFETIME.COM IF ASSISTANCE IS NEED, CALL OUR CUSTOMER SERVICE PARTMENT 1 (800) 242-3865 Ext. 1408 HOURS: 9:00 a.m. to 5:00 p.m. Monday through Friday (Mountain Standard
More informationISO INTERNATIONAL STANDARD. Earth-mover tyres and rims Part 3: Rims. Pneumatiques et jantes pour engins de terrassement Partie 3: Jantes
INTERNATIONAL STANDARD ISO 4250-3 Third edition 2006-08-01 Earth-mover tyres and rims Part 3: Rims Pneumatiques et jantes pour engins de terrassement Partie 3: Jantes Reference number ISO 4250-3:2006(E)
More informationTake a closer look at; Parts - Equipment Systems
K www.segaquatics.com Take a closer look at; Parts - Equipment Systems Design - Performance - Energy Efficiency Fountain Equipment Vaults Pool / Spa Equipment Systems - Filter Tanks Collector Tanks - Commercial
More informationMedium Pressure Valves, Fittings and Tubing Pressures to 22,500 psi
Medium Pressure Valves, ittings and Tubing Pressures to 22,00 psi MXMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality
More informationSUPERSmall O-Rings. The Seal Man s O-Ring Handbook
SUPERSmall O-Rings SUPERSmall O-Rings are available in sizes as small as.002 ID, which is 0.0 mm and with cross sections of.008 or 0.08mm. SUPERSmall O-Rings are manufactured out of various materials including
More informationBelow is a chart that represents every available shell
nsrt rrngmnts & ottions ris --5015 olr yp onnctors lcting our nsrt rrngmnt & ottion low is chrt tht rprsnts vry vill shll n insrt rrngmnt within th sris. o choos th propr insrt rrngmnt, you must irst istinguish
More informationTABLE 4 TABLE 5. Design Recommendations. for Conductive Elastomers. Fillers. Profiles
Design Recommendations for Conductive Elastomers Fillers Leader Tech Inc. is currently offering six different fillers that can be mixed with the polymers. These fillers are Pure Silver, Silver Plated Copper,
More informationSlide and Turn System SF35
Profile system Framed slide and turn system Non-thermally insulated aluminum profiles with insulated glass Option of flush or weathered bottom track The flush bottom track is particularly suitable for
More informationMODEL CHEST PULLEY SYSTEM
MODEL 9180 CHEST PULLEY SYSTEM 1 PARTS LIST FOR CHEST PULLEY Note: Check with your architect or a professional contractor for hardware required to attach the unit to the wall and floor in your facility.
More informationEurostyle Terminal Blocks Focus Product Stock List
Eurostyle Terminal Blocks Focus Product Stock List Introduction Table of Contents In an ongoing effort to better serve the Industrial Machinery, Commercial, and HVAC markets, Tyco Electronics is pleased
More informationRudder Kit Assembly Instructions for Quest 13
Rudder Kit Assembly Instructions for Quest 13 Revised 4/2/2015 78501 Rudder System The Hobie Quest is designed for the addition of an optional rudder system. Rudder systems in boats like this allow you
More informationProduct Catalogue. Version 8.0. GSection. Hendrickson Suspension
Product Catalogue GSection Version 8.0 Hendrickson Suspension Section G Air Suspension Components Hendrickson HTE Suspension G:28 PRODUCT CATALOGUE 8.0 Hendrickson HTE Suspension - Part List Part No. Item
More informationPrecision Rotary Ball Screw
57E Precision Rotary Ball Screw Models DIR and BLR Outer ring Ball screw nut Deflector Section A Screw shaft Spacer Seal Collar Ball End cap Retainer End cap Ball Screw shaft Outer ring Structure of Standard-Lead
More informationModel 23H Hand Crank Seamer
OPERATOR'S MANUAL Model 23H Hand Crank Seamer If you are not experienced with your seamer, please read and understand this manual before operating the machine. If you have a question discuss it with your
More informationPOWER TRANSMISSION PARTS. Spare parts in-stock when you need them. Classical Timing Pulley & Belt Drives.
POWER TRNSMISSION PRTS Spare parts in-stock when you need them lassical Timing Pulley & elt Drives lassical Timing Pulley & elt Drives lassical timing belts offer a maintenance free and economical alternative
More informationRudder Bearing Systems. Durable, water-tight and abrasion-resistant bearing products that eliminate metal-on-metal contact.
Rudder Bearing Systems Durable, water-tight and abrasion-resistant bearing products that eliminate metal-on-metal contact. PRODUCT CATALOG 2014 Specialists in innovative, high-quality marine systems for
More informationParts Manual STRIKER Striker 2840 Parts List - PN Printed in USA 03/18/08
Parts Manual STRIKER 2840 Striker 2840 Parts List - PN 238155 - Printed in USA 03/18/08 Standard Parts Recommended General Wear Parts Ref No Part Description Qty Part No 1 Squeegee Hose Assembly
More informationViking Xtreme Manual Valves Air Control Valves
atalog 0697 Viking Xtreme anual Valves ir ontrol Valves The Viking Xtreme anual valve range is robust, versatile and combines high performance with compact installation dimensions. The valves rugged lever
More informationIBS, INCORPORATED Index Washers W A S H E R S. Washers, Lock Alloy C-8 External Tooth C-10. Internal Tooth C-10
IB, INCOPOTD Index ashers ssortments Flat asher Copper C-11 Fender asher C-9 eavy Duty C-5 Lock asher Internal & xternal tar asher C-10 ur-lock Vibration-esistant ashers C-7 Back-Up ashers luminum ound
More informationTREE ACCESS EVO di 5
26.01.17 1 di 5 2163 Every feature of the Tree Access Evo has been developed to meet the needs of the most demanding tree climbers. The innovative mobile bridge system is manufactured from 10.5 mm semi-static
More informationSTRONGER THAN STEEL SṂ
ProSTUD product catalog STRONGER THAN STEEL SṂ DRYWALL FRAMING SYSTEM ProSTUD D R Y W A L L FRAMING SYSTEM ClarkDietrich. WHERE INNOVATION TAKES FORM. The ProSTUD Drywall Framing System can be called many
More informationMODEL / SINGLE and DUPLEX PULLEY SYSTEMS
MODEL 922181/922182 SINGLE and DUPLEX PULLEY SYSTEMS MODEL 922181 SINGLE PULLEY SYSTEM MODEL 922182 DUPLEX PULLEY SYSTEM 1 PARTS LIST FOR SINGLE/DUPLEX COLUMN PULLEYS Note: Check with your architect or
More informationLiquid Tight Strain Relief Fittings, Accessories & Conduit System
Liquid Tight Strain Relief Fittings, ccessories & Our Service makes the difference! 20 years of excellence! Table of Contents Nylon Strain Relief Fittings Page escription 3 Nylon Fittings - Introduction
More informationOUTER RACE SHIM SPACERS METRIC OUTER RACE SHIM SPACERS. All Dimensions in Millimeters. Material:300 Series Stainless Steel
OUTER RACE SHIM SPACERS Material:300 Series Stainless Steel METRIC OUTER RACE SHIM SPACERS All Dimensions in Millimeters Material:300 Series Stainless Steel 6-16 INNER RACE SHAFT SPACERS 3 /32" To 1 /2"
More informationAir Gripper (2 Finger) (3 Finger)
Rotary ctuated ir Gripper ( Finger) (3 Finger) MHR/MDHR, MHR3/MDHR3 High Precision - Repeatability ±.1mm Parallel opening and closing mechanism utilizing a cross roller guide produces smooth operation
More informationAvailable Sizes (Both width and height are available in the 10mm unit.) Pull Cord Type (with limit stopper) 300~2000mm 400~2000mm 400~2000mm 6m 2
ROLL SRN L R ROLL SRN L R STNR TYP vailable Sizes (oth width and height are available in the 10mm unit.) Method Max. rea Ratio of : Pull ord Type Pull ord Type (with limit stopper) 300~00mm 400~00mm 400~00mm
More informationAPPLICATION CONSIDERATIONS
Idlers POLY-V * DRIVES ALL THE ADVANTAGES OF V-BELTS. COMBINED WITH THE SIMPLICITY OF FLAT BELTS. BROWNING Poly-V* drives provide the best of all power transmission combinations: the superior driving force
More informationMcDaniel. General Service Gauges. (Brass Internals) Stainless Steel Case 1 1 /2 and 2 1 /2 Gauges. All Brass 2 and 2 1 /2 Gauges M C
cdaniel General Service Gauges (Brass Internals) Polyamid B ase (Fiberglass reinforced) 4 and 6 Gauges Stainless Steel ase 1 1 /2 and 2 1 /2 Gauges All Brass 2 and 2 1 /2 Gauges cdaniel General Service
More informationBUILD A BIKE. At Keith Bike, we are proud to offer you more than one thousand
UL K t Keith ike, we are proud to offer you more than one thousand different combinations for our complete bikes. Stay tuned for our complete bike catalog and online ordering system coming real soon. Remember
More informationACME Connectors and Fittings Extended Type Hose Couplings for Vapor and Liquid Service A7571 and A7575 Series
M onnectors and Fittings xtended Type Hose ouplings for Vapor and Liquid Service 7571 and 7575 Series esigned especially for liquid filling and vapor equalization of LP-Gas and anhydrous ammonia. The limited
More informationISO INTERNATIONAL STANDARD. Earth-mover tyres and rims Part 3: Rims. Pneumatiques et jantes pour engins de terrassement Partie 3: Jantes
INTERNATIONAL STANDARD ISO 4250-3 Third edition 2006-08-01 Earth-mover tyres and rims Part 3: Rims Pneumatiques et jantes pour engins de terrassement Partie 3: Jantes Reference number ISO 2006 PDF disclaimer
More informationINTERNATIONAL EQUIPMENT COMPONENTS, INC. & KNOB & HANDLE CLAMP ADJUST STABILIZE FASTEN. Ph
INERNAIONA EQUIPMEN COMPONENS, INC. www.levelingmounts.com & www.iec-corp.com KNOB & ANE Ph. 562.597.4533 CAMP AJUS SABIIZE FASEN elcome... e re pleased to introduce our new line of Adjustable andles and
More informationNORDEX. Foundations. Nordex N117/3000
Foundations Nordex N117/3000 Nordex Energy GmbH, Langenhorner Chaussee 600, 22419 Hamburg, Germany All rights reserved. Observe protection notice ISO 16016. K0801_042963_EN Revision 00, 2013-02-04 1 /
More informationUKB-System W. Type Weinbrenner
UKB-Sstem W Tpe Weinbrenner.. Explanation punches/top-tools and dies. 134 1 Punches/top-tools Punches/top-tools. 136 Holder for blade with changeable 30 blade. 137 88 Screw-on punch/top-tool. 137 Holder
More informationSee Plastic Pipe Engineering Guide for additional information
Schedule 40 PVC Pipe Dimensions & Pressure Ratings Schedule 40 Pipe om. Pipe Size (in) O.D. Average I.D. in. Wall ominal Wt./Ft. aximum W.P. PSI* 1/8 0.405 0.249 0.068 0.051 810 1/4 0.540 0.344 0.088 0.086
More informationE r s a t z t e i l l i s t e L i s t o f S p a r e P a r t s Liste des Pièces de Rechange
E r s a t z t e i l l i s t e L i s t o f S p a r e P a r t s Liste des Pièces de Rechange Modell Model HP-M 100 Modèle........................ Maschi nen- Nr. Mac hine No. MA13300-32-1 No. de constructi
More informationW A L D M A N U F A C T U R I N G C O M P A N Y, I N C.
A Axle & Nut Assemblies 22 Axle Sets 22 Axles 22 B Bars, Handle 12,13 Basket Fittings 10 Baskets 7,8,9,10 Bolts, Binder 15 Bolts, Expander 15 Bolts, Fork Crown 17 Bolts & Nuts, Assorted 21 Bolts & Nuts,
More informationLiquid Tight Strain Relief Fittings, Accessories & Conduit System. Our Servicei makes the difference! ULf1 746C. Committed To Excellence!
Liquid Tight Strain Relief Fittings, ccessories & Our Servicei makes the difference! ULf1 746C Committed To Excellence! e! Table of Contents Nylon Strain Relief Fittings Page escription Strain Relief ccessories
More informationMASTER TRUING STAND TS-3. Optional Dial indicator set with brackets Dial indicator bracket set only
MASTER TRUING STAND TS-3 3 2 1 3 8 9 4 10 7 6 5 12 13 Optional 1555-1 Dial indicator set with brackets 1556-1 Dial indicator bracket set only 49 11 16 14 15 48 32 31 37 38 20 19 17 18 34 39 21 36 22 33
More informationE r s a t z t e i l l i s t e L i s t o f S p a r e P a r t s Liste des Pièces de Rechange
E r s a t z t e i l l i s t e L i s t o f S p a r e P a r t s Liste des Pièces de Rechange Modell Model HP-M 100 Modèle........................ Maschi nen- Nr. Mac hine No. MA13300-32-1 No. de constructi
More informationJIS Standard Hydraulic Cylinder
IS Standard ydraulic ylinder E/// Series Q E Series N M S Nominal pressure: 3.5 elated MPa D- :,,,,, Series Nominal pressure: MPa :,,,,, / Series Nominal pressure: MPa :,,,,, 3.5 MPa MPa MPa IS Standard
More informationRectangular (RPS) Square (SPS) Step Cut (SCP) Material SCP - Step Cut CI - Cast Iron
Ring Materials: Temp. Range 15% Glass filled PTFE -268 to 288 40% ronze filled PTFE -268 to 288 40% Glass Reinforced Nylon -240 to 149 15% Graphite Filled PTFE -72 to 232 15% Glass, 5% Moly Filled PTFE
More informationFlange Adapters. Threadless, weldless transition from flanged piping systems to tubing systems
www.swagelok.com Flange dapters Threadless, weldless transition from flanged piping systems to tubing systems Flange types meet SM, IN, N, and IS standards One-piece integrally machined forged body vailable
More informationdon't print this page!
don't print this page! www.ustsubaki.com Markets and Applications U.S. Tsubaki sprockets are utilized worldwide in many markets and applications, including: Oil and Gas Lumber Mining Primary Metals Material
More informationAirHawk II Air Mask. Keep the basics. Add the choices.
irhawk II ir Mask Keep the basics. dd the choices. Optional Shoulder Pads Optional arbon ylinder ir Frame arrier PR14 Pressure Reglator Nylon or Kevlar Harness Optional Stainless Steel ylinder and Optional
More informationReplacement parts to fit CHAIN & SPROCKETS CONTENTS. Alphabetical Index Follows
S CONTENTS SECTION S...CS-- through CS--6 Alphabetical Index Follows www.tiscoparts.com fax: (0)356-5487 tel: (0)338-045 204 oods Equipment Company/TISCO All rights reserved. CS-I S ALPHABETICAL INDE C
More informationCompact type LES16D. Basic type/r type Symmetrical type/l type In-line motor type/d type
Electric Slide Tables LES/LESH Series RoHS Step Motor (Servo/ VDC) Reduced cycle time Positioning repeatability: ±.5 mm Compact Type LES Series Size: 8, 16, 5 Compact Compared with the LESH, Size: 8, 16,
More informationTHE RC-26GLP CHAMBER RC-26GLP RC-26G
Series 20 Chamber Instructions Model RC-26GLP Low Profile Large Bath Chamber SERIES 20 CHAMBERS A feature in common with all Series 20 chambers is the use of a glass coverslip for the floor of the chamber.
More information8 page. //: Belt Line Specification SHIMANO ALFINE 8 SG-S500/SG-S mm BELT LINE 1 OF 2 05
//: Belt Line Specification SHIMANO ALFINE 8 MODEL NUMBER SG-S500/SG-S501 SHEET REV 1 OF 2 05 10.5 MM FLANGE-TO-FLANGE DISTANCE FROM REAR SPROCKET INNER FLANGE SURFACE TO FRONT SPROCKET INNER FLANGE SURFACE
More informationWFO-*P Series Floor Diffuser - Plenum installation and maintenance instructions
WFO-*P Series Floor Diffuser - Plenum installation and maintenance instructions Author: Tony Pepper Creation Date: 6.11.09 Checked: MP, SF, WTK,NB Revision: 0 Tools required: 1 x Medium Size Flat Blade
More informationAPAS - 72 Parts Manual
VERSION HISTORY The table below summarizes the history of this document as it is published onto the company website(s). It identifies the version, date of issue and revisions and changes. VERSION DATE
More informationJohn Deere Mt Parts Manual L130 Mowing Deck
John Deere Mt Parts Manual L130 Mowing Deck Alan, I also have a John Deere L120 and my mower stopped working, I'm also loooking for a wiring diagram, since Would you by any chance have the parts manual
More informationRolled Rotary Ball Screw
51E Rolled Rotary Ball Screw Model BLR End cap Collar Seal Spacer Ball End cap Screw shaft Outer ring Ball screw nut Retainer Outer ring Ball Fig.1 Structure of Large Lead Rotary Nut Ball Screw Model BLR
More informationMODEL TRIPEX PULLEY SYSTEM
MODEL 922184 TRIPEX PULLEY SYSTEM 1 PARTS LIST FOR TRIPEX PULLEY SYSTEM Note: Check with your architect or a professional contractor for hardware required to attach the unit to the wall and floor in your
More informationfeatures and benefits:
Hopup A variety of sizes, kits and options of Hopup displays are available. Hopup tension fabric displays are simple, versatile and can be set up in seconds. Hopups feature a lightweight, durable frame
More informationTRIPLE CLAMPS AND HANDLEBARS TRIPLE CLAMPS HANDLEBARS & SFS TRIPLE CLAMPS
TRIPLE CLMPS ND HNDLERS WWW.NK-NEKEN.COM TRIPLE CLMPS HNDLERS & SFS TRIPLE CLMPS D I S T R I U T E D Y WWW.PRTSEUROPE.EU HNDLERS VRILE DIMETER HNDLERS WITH CONICL DESIGN 10 T6 aluminum aerospace quality
More informationREGIONAL CATALOG: NORTH & SOUTH CAROLINA
REGIONAL CATALOG: NORTH & SOUTH CAROLINA Thank you for your interest in US Foundry Products. This Regional Catalog has been developed to show the most commonly used and specified Municipal Castings for
More informationGEARTEK UNIT LIST PRICE 'C' SERIES (Effective 01/01/14)
'C' SERIES (Effective 01/01/14) Model Pump, C * Pump, C * Pump/Motor* Flow Divider* Section Single -2B5 Tandem/Sect. RPMC -2B5 per section C45 $1,177.41 $1,165.86 $1,223.58 $1,485.61 C65 $1,200.49 $1,194.72
More informationPrecise and accurate are two words that
DIESEL n DUST Schultz & Larsen Hunter Traveller chambered in.270 Winchester Article and Photos by Editor Precise and accurate are two words that I would use to sum up Danish firearm manufacturer Schultz
More informationROAD wheel set. Dealer's Manual DURA-ACE WH-R9100-C24-CL WH-9000 ULTEGRA WH-6800
(English) DM-WH0002-11 Dealer's Manual ROAD MTB Trekking City Touring/ Comfort Bike URBAN SPORT E-BIKE ROAD wheel set DURA-ACE WH-R9100-C24-CL WH-9000 ULTEGRA WH-6800 Non-Series WH-RS81 WH-RS61 WH-RS31
More informationWelded Terminal to Three NEMA Pads Pipe ending going to three NEMA pads. Part is designed to be corona free for 345 kv and 500 kv service.
ouplers ouplers YPE WRP3-8-V- Welded erminal to hree NEM Pads Pipe ending going to three NEM pads. Part is designed to be corona free for 345 kv and 500 kv service. luminum lloy 11 2 7 3/8 30 USOMER PIPE
More informationREPAIR PART NUMBER NUMBER DESCRIPTION 0137 ELE 0136 ELE 12 VOLT SOLENOID
PART REPAIR PART NUMBER NUMBER DESCRIPTION 0137 ELE 0136 ELE 12 VOLT SOLENOID 0203 WHL 0250 WHL WHEEL HUB 0251 WHL AXLE 0252 WHL DUST CAPS 0253 WHL TIRE - 210 SP 0204 WHL 0211 WHL TIRE & WHEEL - SP 0250
More informationSPARE PARTS LIST. CHAIN SAWS 450, from
SPARE PARTS LIST CHAIN SAWS 450, from 2011-09 - ACCESSORIES 450, from 2011-09 - ACCESSORIES 450, from 2011-09 - Ref Part No Description Remark QTY KIT 1 503 55 85-04 TOOL 1 CARBURETOR 450, from 2011-09
More informationSTRONGER THAN STEEL SṂ
ProSTUD product catalog STRONGER THAN STEEL SṂ DRYWALL FRAMING SYSTEM ProSTUD D R Y W A L L FRAMING SYSTEM ClarkDietrich. WHERE INNOVATION TAKES FORM. 3 The ProSTUD Drywall Framing System can be called
More informationDimensions & Specifications
Dimensions & Specifications These pages illustrate our commonly used punches, dies and related tooling for Mubea Ironworkers. Refer to our Cross Reference Catalog for the proper tooling to fit your machine.
More informationOPERATOR'S MANUAL Model 23 or 24 Belt Drive Electric Seamer
OPERATOR'S MANUAL Model 23 or 24 Belt Drive Electric Seamer Model 23-500 (shown) If you are not experienced with your seamer, please read and understand this manual before operating the machine. If you
More informationAFFORDABLE BATH ACCESSIBILITY
1-800-431-3000 En español 1-800-511-5652 hdsupplysolutions.com AFFORDABLE BATH ACCESSIBILITY CATALOG OUR PRODUCTS WORK WITH EXISTING TUBS! QUICK TO INSTALL! MOST AFFORDABLE OPTION DIY KITS OR FULLY INSTALLED
More informationSprockets. Section Contents ROLLER CHAIN DRIVES
Sprockets ROLLER CHAIN DRIVES Section Contents General Description... 266-267 Horsepower Ratings Charts... 268-270 Selection Charts... 271-273 MINIATURE CHAIN SPROCKETS Catalog Number Selections/Dimensions...274
More informationPRICE BID T Sub : Supply of tools and tackles for workshop clarifier section at GSECL TPS UKAI.
PRICE BID T - 3786 Sub : Supply of tools and tackles for workshop clarifier section at GSECL TPS UKAI. SCHEDULE B (Price Bid) Description : Supply of tools and tackles for workshop clarifier section at
More informationBull s-eye Levels and Screw-On Levels
Bull s-eye Levels and Screw-On Levels Technical information Definition of terms A spirit level is a hollow body filled with a fluid and a gas bubble which is used to check the horizontal position of an
More informationDICTATOR Spring Rope Pulleys for the Closing of Sliding Doors
DICTATOR for the Closing of Sliding Doors Spring rope pulleys are a simple, efficient and cost-effective closing device for sliding doors. During the opening of the door the internal spring is tensioned
More informationSafety Edges Safedge Profiles Specifications
Presence Sensing Safety evices Specifications The ability of the Safedge profile to out perform competition lies in its innovative design. It uses a combination of non conductive rubber and flexible wire
More informationTsubaki Sprocket Capabilities
Tsubaki Sprocket Capabilities Introduction to Made-to-Order Sprockets At Tsubaki, our commitment is to bring you the highest value in the industry today. Period. And as a full line supplier of power transmission
More informationP-Series, Lightweight Hand Pumps. Exclusively from Enerpac. 70
-eries, ightweight and umps umps shown, from top to bottom: -802, -842, -202, -142 xclusively from nerpac ylinder Matching hart For help in selecting the correct hand pump for your application, please
More information1800C and 1800C-HC Series Service Regulators
1800C and 1800C-HC Series Service Regulators Installation Instructions www.elster-americanmeter.com General Information: The 1800C and 1800C-HC Regulators are available as Full Capacity Internal Relief
More informationFlow Controls CRYO-FLOW PRODUCTS
low ontrols RYO-OW ROUTS Stainless low ontrols TM Series with olor ands esigned for extremely precise control of hydraulic and pneumatic actuators. rovides metered flow in one direction and free-flow
More informationBronze-Plated Wear Plates
Slide ction omponents ronze-plated Wear Plates ronze-plated Wear Plates WP -M-E ronze-plated Wear Plates provide a long-lasting wear surface for ronze- Plated molds requiring slides, cams or flat surfaces
More information