Bronze-Plated Wear Plates
|
|
- Clarissa Miller
- 5 years ago
- Views:
Transcription
1 Slide ction omponents ronze-plated Wear Plates ronze-plated Wear Plates WP -M-E ronze-plated Wear Plates provide a long-lasting wear surface for ronze- Plated molds requiring slides, cams or flat surfaces where frictional wear is a factor. ronze plating of.008 to.010 thickness applied to the top surface of flat steel plates lose tolerance on thickness of +.000/-.002 Easy to machine, saving time and tools No pre-drilled holes allows flexibility in mounting patterns Slide ction omponents ronze-plated Wear Plates / 8 S. PER IN* 3 / 16 S. PER IN* 1 / 4 IKNESS 1 / 8 3 / 8 S. PER IN* 5 / 16 S. PER IN* 3 / 8 S. PER IN* 1.00 WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP IKNESS 1 / 2 1" S. PER S. PER S. PER S. PER / 2 IN* 5 / 8 IN* 3 / 4 IN* 1" IN* 1.00 WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP WP * o calculate weight, multiply the weight per inch by the number of inches (length) desired. NOE: Wear Plate lengths are available in one-inch increments, with a minimum order length of 6" required. ut length is provided with an additional 1 / 16 to 1 / 8 inch in length for machining. Minimum cut length is 3 inches. ll items in stock. WEN ORERING, PESE SPEIFY: 1. Item Numbers from charts 2. Plate length 3. Number of pieces 4. Method of shipment
2 Slide ction omponents Self-ubricating Wear Plates Self-ubricating Wear Plates SP -M-E Self-ubricating Wear Plates provide a long-lasting wear surface for molds requiring slides, cams or flat surfaces where frictional wear is a factor. ow coefficient of friction No pre-drilled holes allows flexibility in mounting patterns Standard plug pattern designed for maximum surface lubrication lose tolerance to ease installation Material: luminum ronze with Graphite Plugs ardness: 179 hn IKNESS 1 / 4 (.250 ±.001) IKNESS 3 / 8 (.375 ±.001) IKNESS 1 / 2 (.500 ±.001) IKNESS 5 / 8 (.625 ±.001) NUMER ENG NUMER ENG NUMER ENG NUMER ENG SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP ll items in stock. SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP OW O ORER: Use Item Numbers in charts for ordering. Slide ction omponents Self-ubricating Wear Plates
3 Slide ction omponents Self-ubricating Wear Ways = ±.010 NOE: ll -M-E Self-ubricating Wear Ways are supplied in 40" lengths. Slide ction omponents Self-ubricating Wear Ways Self-ubricating Wear Ways SW Well-suited for custom applications Standard plug pattern facilitates cutting to a variety of lengths No pre-drilled holes allows flexibility in mounting patterns -M-E Self-ubricating Wear Ways are supplied in 40-inch lengths. he plug pattern is consistent throughout the surface of the Wear Way, so that the Wear Way may be cut to a variety of lengths. Mounting holes are not supplied so that they may be drilled to suit custom applications. ypical mounting procedure is to machine out the plug location to use for mounting screws. (See Suggestions for Fastening below.) Suggestions for Fastening ypical mounting procedure is to use plug location for screw location. NOE: For 3/8" thicknesses, the suggested screw is a 1/4 flathead screw (or 1/4 socket head screw max). Material: luminum ronze with Graphite Plugs ardness: 179 hn NUMER IKNESS SW SW SW SW SW SW SW SW SW SW SW SW SW SW SW SW ll items in stock. WEN ORERING, PESE SPEIFY: NOE: For 1/2", 5/8", 3/4" thicknesses, the suggested screw is a 3/8 socket head screw max.
4 Slide ction omponents Self-ubricating Gib ssemblies ase Plates for ssemblies Self-ubricating Gib ssemblies S Material: luminum ronze with Graphite Plugs ardness: 179 hn Standardized assembly Wide variety of applications Easily installed in pre-machined pocket Reduces design and assembly time E ± he Gib ssembly includes three components: two -Gibs and a ase Plate. he -Gibs are provided with screw holes and are spot-drilled for dowels; the ase Plate includes thru holes to allow for easy assembly. NOES: 1. olerances not noted are ±.010, ole locations are ± Graphic plug pattern varies by product size. ll items in stock. WEN ORERING, PESE SPEIFY: N /2 R. YP. M.375 ±.001 NUMER E S S S S S S S S S S S S S FOR SP1002 & SP I. RU OE S...S. OE QY. SEE R FOR SP2001 RU SP I. RU OE S...S. OE QY. SEE R.380 G J ase Plates for Gib ssemblies SP Material: luminum ronze with Graphite Plugs ardness: 179 hn F.26 x 45 YP. (4) N /2 R. YP. M NUMER F G J M N.28 I. RU OE FOR S...S. (4) PES.26 x 45 YP. (4) FOR NO. SP1001 OE OIONS ONY MOUNING OE QY SP SP SP SP SP SP SP SP SP SP SP SP SP Slide ction omponents Self-ubricating Gib ssemblies; ase Plates for ssemblies
5 Slide ction omponents -Gibs for Gib ssemblies NOES: 1. olerances not noted are ±.010, ole locations are ± Graphic plug pattern varies by product size. RIE & 'ORE FOR 5/16 SOKE E P SREWS (EXEP NUMERS SG1001, SG1002 N SG1003 WI RE RIE N 'ORE FOR 1/4 S...S.) Ø 9/32 SPO RI FOR Ø 1/4 OWE (2) PES.380 ±.005 K G J M I.26 x 45 F E Slide ction omponents -Gibs for Gib ssemblies -Gibs for Gib ssemblies SG Material: luminum ronze with Graphite Plugs ardness: 179 hn FOR 5/16 SS =.38 FOR 1/4 SS =.28 NUMER E F G I J K M SG SG SG SG SG SG SG SG SG SG SG SG SG MOUNING OE QY WEN ORERING, PESE SPEIFY: ll items in stock.
6 Slide ction omponents ronze-plated -Gibs Self-ubricating -Gibs ronze-plated -Gibs G RONZE PE SURFES ypical pplications of -Gibs and Wear Plates NUMER EIG ENG PPROX (S) G G G G G G G Self-ubricating -Gibs SG Material: luminum ronze with Graphite Plugs ardness: 179 hn NUMER SG SG SG SG SG SG SG SG SG SG SG SG SG SG SG SG SG SG SG SG SG SG SG ll items in stock. MOE PR SIE ow coefficient of friction No pre-drilled holes allows flexibility in mounting patterns lose tolerance NGE PIN (ORN PIN) WER PE EE OK -GI WER PE SOP OK NGE PIN (ORN PIN) EE OK -GI WER PE SIE -M-E Self-ubricating -Gibs provide a long-lasting wear surface for high-production molds using slides and cams. -Gibs are easy to machine and can be shaped to any configuration, requiring no special tools. hey are supplied with no pre-drilled holes, providing the designer with flexibility in mounting patterns. his allows the designer to work around water lines and other components in the mold. NOES: 1. olerances are ±.010 unless otherwise indicated. 2. Graphic plug pattern varies by product size. WEN ORERING, PESE SPEIFY: REF Slide ction omponents ronze-plated -Gibs; Self-ubricating -Gibs
7 Slide ction omponents Self-ubricating Square Gibs E F G M PUG RE ON WO SURFES R 1.00 YPI (2) YPI SQURE GI PPIION RIE & ORE FOR N SOKE E P SREWS NOES: 1. olerances are ±.010 unless otherwise indicated. 2. Graphic plug pattern varies by product size. Slide ction omponents Self-ubricating Square Gibs Self-ubricating Square Gibs SSG Material: luminum ronze with Graphite Plugs ardness: 179 hn NUMER E F G M N SSG / 8 SSG / 8 SSG / 8 SSG / 8 SSG / 8 SSG / 8 SSG / 8 SSG / 8 SSG / 8 SSG / 8 SSG / 8 SSG / 8 SSG / 8 SSG / 8 SSG / 8 WEN ORERING, PESE SPEIFY: ll items in stock.
Belt strength. Available the belt. (kg/m) PP - Polypropylene 2, to [B] PE - Polyethylene 1, to [B]
SERIES E20 FLAT TOP Eurobelt Series E20 Flat Top, due to a closed surface configuration, is the suitable conveyor belt for those applications in which it is not necessary any drainage through the belt
More informationMADE-TO-ORDER SERIES CHAIN
Specialty/Made-o-Order Attachments Standard Straight and Bent Attachment Chain MAE-O-OE SEIES CAIN S iamond M-35, SA1 S1 (one hole) M-1, S1 S2 (one hole) imensions in Inches WI WO PIC S2 S1 B2 B1 A1 1
More informationRekluse Motor Sports. TCS Clutch Baskets CRF 450R/X CR 250R
Rekluse Motor Sports TCS Clutch Baskets CRF 450R/X 2002 2008 CR 250R 1992 2006 Installation Guide Copyright 2006 Rekluse Motor Sports TCS Revision 1.000 RMS 4113 195-4113 Manual Revision: 081606 Rekluse
More informationBelt strength. Available the belt. (kg/m)
SERIES E50 FLAT TOP Eurobelt Series E50 Flat Top, due to its closed surface, completely flat and smooth, avoids any damage and overturn in the product, as well as the resulting line blockage. It is the
More informationLMU100/200 Series. Standard Specifications
Mist Spray Unit MU/ Series Intermittent spray to cutting and press gear chains, etc. Standard Specifications Inlet air Oil tank set range Oil Dynamic viscosity of oil ( C) Oil tank capacity (cm ) mbient
More informationSERIES A24 RAISED RIB
SERIES A24 RAISED RIB Eurobelt Series A24 Raised Rib conveyor belt has been designed mainly to be used with finger plates. It has ribs that, sticking out 6 mm above the module, provide a greater resistance
More informationSERIES E30 RAISED RIB
SERIES E30 RAISED RIB Eurobelt Series E30 Raised Rib conveyor belt has been designed mainly for making product transfers by using finger plates. Due to its smooth surface of projecting ribs, it is recommended
More informationRECTANGULAR CONNECTORS
RETNGULR ONNETORS FN360 Series FN-365P FN-365J FN-364P FN-364P FN-364J FN-364J FN-365P FN-365J FN-364P FN-364J FN-362J FN-363J FN-365P FN-367J FN-365P FN-364P FN-361P With type cover FN-365J FN-364P With
More informationIndustrial Compression Style Fittings. Compression Fittings Compress-Align Fittings Brass Metric Compression Poly-Tite Fittings Hi-Duty Fittings
Industrial Compression Style Fittings Compression Fittings Compress-lign Fittings rass etric Compression oly-tite Fittings i-uty Fittings arker annifin Corporation Fluid System Connectors Otsego, I Industrial
More information180 Series Rotary Shear Directional Control Valve
180 Series Rotary Shear Directional Control Valve Up to l 38 lpm, 10 US gpm l 700 bar, 10,000 psi Milwaukee, WI 53235, US el: +1 (414) 769-6400 sales-us@webtec.com St. Ives, Cambs. E27 3LZ, UK el: +44
More informationPSSS-Straight Square Steel Poles, 4", 5" FINISH
PSSS-Straight Square Steel s, ", " CATALOG NUMER: FIXTURE TYPE: PROJECT: POLE SPECIFICATIONS Conforms to ASTM-A 00 Grade : Minimum Yield Strength of 6,000 PSI. Wall Thickness Available in 11 Gauge (. )
More informationGACELA roller runners
INDEX roller runners 1... pp. 4 RUNNERS... ADJUSTABLE... FOR DOWEL-FIX DRAWER ASSEMBLY... QUICK ASSEMBLY... WITH ADJUSTABLE FRONT... FOR DROP-DOWN FRONT... 4 5 6 7 8 2 GACELA-3... 38 GACELA-3 RUNNERS...
More informationHIGH PRESSURE CONTROL VALVES
METERING VALVE APPLICATIONS: This valve can be used to meter or control flow of liquids and/ or gases on meter runs, flow lines, or may be used as a choke under low pressure drop conditions where freezing
More informationIndustrial Compression Style Fittings
Industrial Compression Style Fittings Compression Fittings Compress-lign Fittings rass etric Compression oly-tite Fittings i-uty Fittings arker annifin Corporation Fluid System Connectors Otsego, I Industrial
More informationTidland Series 'C' Knifeholder INSTALLATION MANUAL Rigid Cartridge Class I, II, III Shear Slitting
Tidland Series 'C' Knifeholder INSTALLATION MANUAL Rigid Cartridge Class I, II, III Shear Slitting Please read and understand all the instructions before you install the Tidland Series 'C' Knifeholder.
More informationTidland Series 'C' Knifeholder INSTALLATION MANUAL Swing Cartridge Class II, III Shear Slitting
Tidland Series 'C' Knifeholder INSTALLATION MANUAL Swing Cartridge Class II, III Shear Slitting Please read and understand all the instructions before you start to install the Tidland Series 'C' Knifeholder.
More informationRZR 900 Hitch Mount Plate
RZR 900 Hitch Mount Plate Polaris RZR 900 2015+ Part #: 5801119 Rev. 031017 491 W. Garfield Ave., Coldwater, MI 49036. Phone: 517-278-7768 E-mail: sales-rtpro@sporttruckusainc.com SAFETY WARNING RT Pro
More informationGEMO 1.3 SANITARY ISO2037
SANIARY ISO2037 51 UES AND FIINGS Catalog able of Contents page 53 66 ISO2037 FIINGS Introduction & Order Information ends 8009 S2WK.. 55 8010 SL2WS... 55 8011 S2WCL... 55 8012 SL2WS... 56 ees 8013 S7W...
More informationGlenair Well-Master TM 260 Micro-D Withstands Extreme High Temperature
Section : Well-Master Micro- + P eader lenair Well-Master TM Micro- Withstands Extreme igh Temperature Standard Micro- connectors are rated for +125. lenair's MWM Micro- can withstand +150 continuous operating
More informationMANUAL ROLLER SHADE MANUAL ROLLER SHADES SHADE SIZES & WEIGHTS: BRACKET PROJECTIONS:
MNUL ROLLER SHDE MNUL ROLLER SHDES (R, R & G0) (R, R & G0) STNDRD OMPONENTS:. Fabric. Roller Tube Dimensions: R.............. /" Diameter R............ /" Diameter R............... " Diameter G0...........
More informationTread Brake Assembly Instructions
reated: 9/06/202, Revision: 2/20/204 Tread rake ssembly Instructions Table of ontents: Lower rake omponents..2-4 able rake ssembly: rake Handle omponents..5-7 able ssembly....8 Tee Handle rake ssembly...9-0
More informationEXCEL SELF-ALIGNING BEARINGS AND POWERTRAX LBB BEARINGS
TM S-ININ INR RINS & PIOW OKS 2/3 X S-ININ RINS N POWRTRX RINS X RINS X INR RINS esigned to fit into precision bores, these bearings are self aligning and offer long life. Precision hardened and ground
More informationMfg. No: Grass Catcher, Single Bag (Export)
Parts Manual Mfg. No: 7600237 Grass Catcher, Single Bag (Export) Copyright Briggs and Stratton. All Rights reserved 01-Apr-2019 Model Components Table Of Contents Page Single Catcher........................................................................................
More information4400 TwinHybrid Gas Seal
4400 TwinHybrid Gas Seal EQUIPMENT PREPARATION MECHANICAL SEAL INSTALLATION INSTRUCTIONS 1 2 200.005" 0,13 mm 125 µ" 3,2 µm R a 3 4 32 µ" 0,8 µm R a 1000 ±.002" 0,05mm CAUTIONS These instructions are general
More informationHand & mechanical directional valves
www.atos.com Table E5-3/E Hand & mechanical directional valves ISO 44 sizes 6,, 6 and 25 H- Hand & mechanical operated directional valves are spool type, three or four way, two or three position valves,
More informationHIGH PRESSURE CONTROL VALVES
METERING VALVE APPLICATIONS: This valve can be used to meter or control flow of liquids and/ or gases on meter runs, flow lines, or may be used as a choke under low pressure drop conditions where freezing
More informationVCO O-ring Face Se al Fit tings
www.swagelok.com O-ring Face Se al Fit tings /8 to sizes 36 or 36L stainless steel, NPT, S thread, and weld connections 2 O-ring Face Seal Fittings ontents Features........................................
More informationACCESSORIES. Standard packing
ACCESSORIES HC RELAYS (Sockets and Terminal ) FEATURES. HC Relay Sockets In the table below, the suitable for each type of HC relay is indicated by a black dot. ) Plug-in type, type, and wrapping type
More informationContinental Industries STEEL SERVICE TEES or FAX Visit
Continental Industries STEEL SERVICE TEES 1-800-558-1373 or FAX 1-800-788-1668 Visit www.conind.com ABOUT US Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and
More informationWALL BRACKETS WALL BRACKETS PDI-179C. PDI-179 Bunting. see diagram next page PDI B-1
PDi-B 500). Bracket has four mounting holes for attachment to reinforcing plates or directly into solid backing in wall. Permanently lubricated oillite pivot bushing. Standard bushing size in 5/8,1/2 is
More informationmechanical APPLICATION
mechanical APPLICATION Many SWAROVSKI ELEMENTS, such as Rivets, Jeans Buttons, Snap Fasteners, Decorative Buttons and Magnet Fasteners, can be applied manually or mechanically, using either semi- or fully
More informationPRESSURE REGULATOR PRESSURE REDUCING. APPLICATION: Regulation of inlet pressure to gas compressors. Control of supply or distribution system pressure
PRESSURE REGULATOR PRESSURE REDUCING APPLICATION: Regulation of inlet pressure to gas compressors. Control of supply or distribution system pressure PRESSURE RANGE: Ductile Iron: Upstream: psig to 125
More informationFRONT BOLT ACTION ASSAULT SHOTGUN
SPECIFICATIONS: CATEGORY........... IMPROVISED; NOTE: CAN BE MANUFACTURED COMMERCIALLY CALIBRE............ 410 TO 12 GAUGE; ADAPTABLE CAPACITY............... 8 TO 10 ROUNDS,.410 CAL. OPERATION..........
More informationBRINGING YOU THE SINCE 1980
BRINGING YOU THE QUALIT Y YOU DESERVE SINCE 1980 2 0 16 P R O D U C T C ATA LO G A Division of Vermont Precision Tools, Inc. QUALITY POLICY Our policy is to consistently achieve or exceed customer satisfaction
More informationMASTER TRUING STAND TS-3. Optional Dial indicator set with brackets Dial indicator bracket set only
MASTER TRUING STAND TS-3 3 2 1 3 8 9 4 10 7 6 5 12 13 Optional 1555-1 Dial indicator set with brackets 1556-1 Dial indicator bracket set only 49 11 16 14 15 48 32 31 37 38 20 19 17 18 34 39 21 36 22 33
More informationDEADBOLT SETS, MECHANICAL FEATURES
, MECHANICAL FEATURES 8000 SERIES LOW PROFILE CYLINDER DEADBOLT FOR 1 5 8 (41mm) DOOR PREP All deadbolts feature a ½ low-profile cylinder projection. CASE: Deadbolt case is formed of heavy gauge steel
More informationSpeciÞcations. Engine Dimensions Dimensions in millimeters. Inch equivalents shown in [].
SpeciÞcations Engine Dimensions Dimensions in millimeters. Inch equivalents shown in []. Ê ßÔ Ê ÛÝ Ñ Ê Û ÎÊ Û É 5 ENGINE IDENTIFICATION NUMBERS Kohler engine identiþcation numbers (model, speciþcation
More informationCode 61 4-Bolt Flanges
INDUSRIES D. 730 Eaton ay, Annacis Business Park oll Free 1-800-928-1170 ebsite: www.sealum.com 4-Bolt s O Ring Boss National Pipe hread Socket eld Pipe Socket eld ube Butt eld Pipe Cover Plates Union
More informationReservoir End Covers Type EC
Other Reservoir ccessories imensions / Technical ata / Order odes Reservoir End overs Type E H Ø2 Ø1 7 Gauge Steel haracteristics Materials End cover made of 7 Grade Steel (pickled and oiled); Stainless
More information02 Push-to-Close Latch
142 02 Push-to-lose Latch ousing: Polypropylene, black or white Pole pieces and mounting : Steel, zinc plated Magnet:, large: Barium ferrite : Strontium ferrite 7.7 (.30) 13.3 (.52) 6.1 (.24) 23.6 (.93)
More informationProportional pressure regulators VPPE
Proportional pressure regulators VPPE Proportional pressure regulators VPPE Product range overview Function Version Pneumatic connection Proportional pressure regulator Nominal size for pressurisation/
More informationHow to Order RM0 0 Z. IN/OUT fitting type Metric size Inch size Straight Elbow Straight Elbow Straight Elbow Straight Elbow ø ø ø ø ø ø ø ø ø/ ø/ ø/ ø
Series RM/ End lock RME Port Plug End block End block type Mounting position L Left side R Right side L side end block 0. L VVQ0000 Single unit regulator / Port plug for regulator block ø0 0 Options Note
More informationAccessories. Finger Guards 134. Filter Guards grille 139. Accessories 140. Technology. DC Axial Fans. DC Radial Fans. Specials.
13 Technology Finger Guards 134 Filter Guards grille 139 140 Specials DC Axial Fans DC Radial Fans Everything that you need for your fan. ebm-papst provides an extensive range of accessories for optimum
More informationCable Glands. Special Applications. RoHS Compliance. Plastic & Metal Cable Glands Adapters Reducers & Enlargers Grommets & Accessories
able Glands RoHS ompliance Plastic & Metal able Glands dapters Reducers & Enlargers Grommets & ccessories L File #: E363825 cable gland is a device that allows the user to pass a cable, wire or tube into
More informationQuikVang. The Original High-Performance Vang INSTALLATION AND OPERATING INSTRUCTIONS MODEL A-8 MODEL A-12
QuikVang The Original High-Performance Vang INSTALLATION AND OPERATING INSTRUCTIONS MODEL A-8 MODEL A-12 33 Broadcommon Road, Bristol, RI 02809 USA T: 401.253.4858 F: 401.253.2552 www.hallspars.com 1 INTRODUCTION
More informationBall Valves Subsea Series
Ball Valves Subsea Series Internal Pressures to 20,000 psi (1379 bar) Water Depths to 12,500 ft (3810 meters) Autoclave Engineers subsea ball valves have been designed to fulfill the ever growing demand
More informationThin pressure gauge. G401-W Series. Symbol Descriptions. A Connection A A. B Pressure display [MPa] P04 0 to 0.4MPa P10 0 to 1.
Thin pressure gauge G401-W Series Thin, compact design ideal for incorporating devices. Suitable for filter regulator, regulator, and pressure switch (P4000-W). onnection: O ring seal, set screw G401-W
More informationSHEET 2: VERTICAL INSTALLATION
IMAGE OW1291 OW1293 OW1295 OW1297 AVATAR OW1301 OW1303 OW1305 OW1307 OW1311 OW1313 OW1315 OW1317 OW1331 OW1333 OW1335 OW1337 SHEET 2: VERTICAL INSTALLATION SHEET 3: HORIZONTAL INSTALLATION Drawing: 760883XX
More informationTechnical information for hinges
451 452 Technical information for hinges In the tables on the following pages are listed a large range of hinge variations. Many more variations are possible if hinges with guide tabs are required i.e.
More informationAir Distribution Corporation Spiral Duct and Fittings are manufactured in accordance with applicable SMACNA, ASHRAE and SPIDA standards.
ir istribution orporation Spiral uct and Fittings onstruction Standards ir istribution orporation Spiral uct and Fittings are manufactured in accordance with applicable SMN, SRE and SPI standards. Galvanized
More informationJIS Standard Hydraulic Cylinder
IS Standard ydraulic ylinder E/// Series Q E Series N M S Nominal pressure: 3.5 elated MPa D- :,,,,, Series Nominal pressure: MPa :,,,,, / Series Nominal pressure: MPa :,,,,, 3.5 MPa MPa MPa IS Standard
More informationOUTER RACE SHIM SPACERS METRIC OUTER RACE SHIM SPACERS. All Dimensions in Millimeters. Material:300 Series Stainless Steel
OUTER RACE SHIM SPACERS Material:300 Series Stainless Steel METRIC OUTER RACE SHIM SPACERS All Dimensions in Millimeters Material:300 Series Stainless Steel 6-16 INNER RACE SHAFT SPACERS 3 /32" To 1 /2"
More informationASTM A182 STAINLESS HIGH PRESSURE FITTINGS INDEX
STM 182 STINLESS HIH PRESSURE FITTINS INEX 90 ELOW / ROSS / TEE / 45 ELOW - SOKET 46 OUPLIN / HLF OUPLIN / P - SOKET 47 90 ELOW / ROSS / TEE / 45 ELOW - THREE 48 OUPLIN / HLF OUPLIN / P - THREE 49 REUIN
More information7500 Series Heavy Duty Precision Ground Radial Bearings
7500 Series eavy uty Precision roun Raial earings PREISIO ROU O OTT SURES, SIIR TO TE 600 SERIES ERIS ESY TO USE I I E SIOS EIU OS X SPEE RE - 5000-6000 RP TROU REE ERI STEE RETIER ESI YO RETIER STR OUE
More informationRelated products. Components for air preparation and pressure adjustment / F.R.L. unit. Pressure gauge. Indidcator
Related products Pressure gauge / indicator omponents preparation and pressure adjustment / unit Refrigerating ir uto. drain ir Pressure gauge ONTENTS Pressure gauge assembly (G401-W) 660 With safety mark
More informationMUELLER. A Wall Type. Indicator Post. Reliable Connections. General Information 2. Technical Data/ Dimensions 3. Installation 4-5.
Installation Instructions manual MUELLER table of contents PAGE A-20814 Wall Type General Information 2 Technical Data/ Dimensions Installation 4-5 Maintenance 6 Parts 7 Indicator Post! WARNING: 1. Read
More information2-jaw self-centering pneumatic parallel gripper (series SX)
SX 2-jaw self-centering pneumatic parallel gripper (series SX) Double acting (normally closed on request). High gripping force. Protection class: IP67. Double O-Ring sealing on the columns. Suitable for
More informationPower Valve: Precision Regulator. High precision, large capacity relief regulator
Power Valve: Precision Regulator Series VEX High precision, large capacity relief regulator port large exhaust capacity pressure reducing valve which utilizes a nozzle flapper mechanism available as air
More informationSailTrack Installation Instructions. CMPE Track
SailTrack Installation Instructions CMPE Track SH-500 SS SH-401 SS SH-200B SS SH-600 SS SH-200A SS www.tidesmarine.com This Tides Marine Sail Track System is used to attach a Tides Track to a bare carbon
More informationProduct Information. Gripper for small components MPG-plus 16
Product Information MPG-plus 16 MPG-plus More powerful. Faster. Longer fingers. MPG-plus gripper for small components 2-finger parallel gripper with smooth roller guides of the base jaws Field of application
More informationProduct Information. Tolerance compensation unit TCU-Z
Product Information TCU-Z TCU-Z Compact. Flexible. Productive. TCU-Z tolerance compensation unit The TCU is compensated on the basis of elastomers that compensate in all three directions, enabling them
More informationTABLE 4 TABLE 5. Design Recommendations. for Conductive Elastomers. Fillers. Profiles
Design Recommendations for Conductive Elastomers Fillers Leader Tech Inc. is currently offering six different fillers that can be mixed with the polymers. These fillers are Pure Silver, Silver Plated Copper,
More informationGS - Parallel Gripper
11: Double acting Patented backlash adjusting system. Long life and reliability, maintenance free. Different options for fastening. Optional magnetic sensors available on page 517. Spring closed (-NC)
More informationMaximum Inlet Pressure. Maximum Outlet (Casing) Pressure. Outlet Pressure Range. 2-inches w.c. to 10 psig (5 mbar to 0,69 bar) Flow Coefficients
Introduction The quickreacting S200 Series pressure reducing service regulators are typically used in industrial or commercial installations to minimize the shock effect of sudden downstream load changes
More informationSplitting cylinder C20
Splitting cylinder C20 Product abbreviation C20 HN C20 = Size of splitting cylinder N or L = Wedge set length H / V / J / C = Mounting version Purpose of application Horizontal splitting (+/- 45 to the
More informationSide-of-Pole Mount for 1 Module (SPM1) For Module Types A & B
Side-of-Pole Mount for 1 Module (SPM1) For Module Types A & B ASSEMBLY INSTRUCTIONS step-by-step assembly and installation Version 1, Rev A PCN 080311-2 SP3363-1 Side-of-Pole Mount for 1 Module (SPM1)
More informationK&B Vault and Riser Closures
K&B Vault and Riser Closures K&B Vault Closures K&B Closures are strong, lightweight, and protect a wide variety of vault splice configurations with an air and water tight seal. K&B closures offer a full
More informationHEAVY DUTY PNEUMATIC
HEAVY DUTY PNEUMATIC Series A4 MEDIUM DUTY HYDRAULIC Series H4 PERMANENTLY LUBRICATED HEAVY DUTY PNEUMATIC Series L4 586.778.7680 SERIES A4/L4/H4 39 A4/L4/H4 FEATURES 1 1 9 9 12 8 7 5 12 3 13 4 10 2 11
More informationInstallation, Operation & Maintenance Manual
Original Instructions Installation, Operation & Maintenance Manual Sentry VREL Control Valve Pressure Conditioning S-SW-IOM-00277-15 1-17 Table of Contents Safety Information... 3 General Safety Precautions...
More informationLock-N-Load. Bullet Feeder
Lock-N-Load Bullet Feeder table of contents steps Overview... 2 List of required hand tools... 2 1: Mounting the Bullet Feeder to the Bench... 3 2: Mounting the Bullet Feed Hopper... 4 3: Bullet Feed Hopper
More informationReplaces Ryan Sod Cutter Parts
Replaces Ryan Sod Cutter Parts O.E.M 1 R250356 R&R Only R&R 12" Sod Cutter Blade, 1/4" x 2 1/2" 5,900 1 R250359 R&R Only R&R 15" Sod Cutter Blade, 1/4" x 2 1/2" 5,900 1 R250358 R&R Only R&R 16" Sod Cutter
More informationHigh Pressure Equipment Taper Seal Valves, Fittings and Tubing
igh quipment Taper Seal Valves, ittings and Tubing 0,000 and,000 psi service igh quipment Company has developed the Taper Seal line of products to assure safe and easy plumbing through,000 psi. These needle
More informationropeline HARDWARE FOR UHMWPE ROPES
HRWRE FOR UHMWPE ROPES lue Wave Rigging Hardware In business since 2, anish based lue Wave /S is today among the leading manufacturers of high quality stainless steel rigging hardware. Focus has for years
More informationSERIES 2 RAMP OWNER S MANUAL TOOLS REQUIRED: BEFORE YOU BEGIN... Read and understand these instructions before beginning a ramp setup.
SERIES 2 RAMP OWNER S MANUAL BEFORE YOU BEGIN... Read and understand these instructions before beginning a ramp setup. Use caution and care for your back when lifting, pushing, pulling, folding or unfolding
More informationMeter, PD Series, E3 A1, S1 and E4 S1 Prior to 2005 Parts List
Issue/Rev. 0.0 (2/13) Meter, PD Series, E3 A1, S1 and E4 S1 Prior to 2005 Parts List Bulletin PO01001 33 Pre 1994 39 32 31 21 Pre 1994 45 18 48 44 30 78 57 46 Note: Angled housing not shown. The Most Trusted
More informationIMPORTANT: RECEIVING INSTRUCTIONS:
Instruction Sheet Sidewinder Mechanical Bender IMPORTANT: RECEIVING INSTRUCTIONS: Visually inspect all components for shipping damage. If any shipping damage is found, notify carrier at once.shipping damage
More informationINSTALLATION INSTRUCTIONS: SCTB1600
INSTALLATION INSTRUCTIONS: SCTB1600 DESCRIPTION: BOLLARD, 1600 DWG: INSTALL_SCTB1600 REV: M01 BASE TYPE B1 DIRECT BURIAL - PG. 6: BOLLARD IS PERMANENT, IT IS DIRECTLY BURIED INTO CONCRETE BASE TYPE B2
More informationSailTrack Installation Instructions. External Track
SailTrack Installation Instructions External Track SH-500 SS SH-401 SS SH-600 SS SH-200B SS SH-200A SS www.tidesmarine.com Before You Begin Your installation will be easier if you move the boom well off
More informationSizes Weight Gripping force Stroke per finger Workpiece weight Pieces : kg N mm kg
MPG-plus Sizes Weight Gripping force Stroke per finger Workpiece weight Pieces : 7 0.06.. 0.63 kg 25.. 350 N 1.5.. 10 mm 0.19.. 1.25 kg Application example Pneumatically driven, dual-axis pick-andplace
More informationGas Pressure Regulator HON 300
Gas Pressure Regulator HON 300 OPERATING AND MAINTENANCE INSTRUCTIONS/ SPARE PARTS Serving the Gas Industry Worldwide 300.20 EDITION 01/2017 1. General The "General description 300.00" for the gas pressure
More informationAir Gripper (2 Finger) (3 Finger)
Rotary ctuated ir Gripper ( Finger) (3 Finger) MHR/MDHR, MHR3/MDHR3 High Precision - Repeatability ±.1mm Parallel opening and closing mechanism utilizing a cross roller guide produces smooth operation
More informationSLAT & LOUVRE FENCING
SLAT & LOUVRE FENCING...make it your own! SLAT & LOUVRE FENCING...make it your own! COST-EFFECTIVE BelAire slat and louvre fencing is a great cost-effective option where a degree of privacy and security
More informationB-Too Drilling and Tapping Machine
Material Specifications Powered by hand or with Ridgid 690 (TM-29) High strength, modular aluminum and steel components Inserts any 3 /4" to 1" corporation stop under pressure Extracts threaded corporation
More informationContinental Industries TRANSITION FITTINGS or FAX Visit
Continental Industries TRANSITION FITTINGS 1-800-558-1373 or FAX 1-800-788-1668 Visit www.conind.com ABOUT US Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and
More informationArbor Terminator Press Operation Manual For IDT Connectors Order No Engineering No: AM
Arbor Terminator Press Operation Manual For IDT Connectors Order No. 11-20-0815 Engineering No: AM7223-140 Description Operation Maintenance Order No: TM-011200815 Release Date: 03-08-12 UNCONTROLLED COPY
More informationQuikVang. The Original High-Performance Vang INSTALLATION AND OPERATING INSTRUCTIONS MODEL D-30 MODEL D-40
QuikVang The Original High-Performance Vang INSTALLATION AND OPERATING INSTRUCTIONS MODEL D-30 MODEL D-40 33 Broadcommon Road, Bristol, RI 02809 USA T: 401.253.4858 F: 401.253.2552 www.hallspars.com 1
More informationINSTRUCTIONS 360 Y-DROP HAGIE STS 2015
INSTRUCTIONS 60 Y-DROP HAGIE STS 05 INSTRUCTIONS 60 Y-DROP HAGIE STS 05 INTRODUCTION Before beginning, it s important to know where each mounting bracket fits relative to the row spacing involved. The
More informationLANDING LEG HARDWARE Chassis & Trailers: Dry & Reefer Van / Flatbed / Auto.
Chassis & Trailers: Dry & Reefer Van / Flatbed / Auto 904.696.0010 www.buffersusa.com Sand Shoes (Low- & High-Profile) Low-Profile Sand Shoes Fab. Steel / Finish Buffers Part # Size Gusset Patch Sides
More informationInstallation, Operation and Maintenance Manual for Back Pressure Regulator
Installation, Operation and Maintenance Manual for Back Pressure Regulator Model 8860 2009 Groth Corporation IOM-8860 Rev. B 12541 Ref. ID: 95565 Page 2 of 13 Table of Contents I. INTRODUCTION 3 II. DESIGN
More informationSAVE THESE INSTRUCTIONS DEALER/INSTALLER: GIVE TO HOMEOWNER OCEAN BLUE ABOVE GROUND POOL LADDERS
SAVE THESE INSTRUCTIONS DEALER/INSTALLER: GIVE TO HOMEOWNER OCEAN BLUE ABOVE GROUND POOL LADDERS ASSEMBLY AND INSTALLATION MANUAL FOR A-FRAME AND INPOOL LADDERS A-FRAME Part No. 400100 PROUDLY MADE IN
More informationQuality Plastic Pipe Fittings. Technical Data. Fabricated PVC Fittings IPS Class 100, 125, 160, 200 SCH 40 & SCH 80 Solvent Weld & Gasketed
Quality Plastic Pipe Fittings Technical Data Fabricated PVC Fittings IPS Class 100, 125, 160, 200 SCH 40 & SCH 80 Solvent Weld & Gasketed Effective April 1, 2002 PIPE DIMENSIONS IPS-IRON PIPE SIZE Minimum
More informationDICTATOR Spring Rope Pulleys for the Closing of Sliding Doors
DICTATOR for the Closing of Sliding Doors Spring rope pulleys are a simple, efficient and cost-effective closing device for sliding doors. During the opening of the door the internal spring is tensioned
More informationENGINE/ PUMP ADAPTERS
ENGINE/ PUMP PTERS Hayes Manufacturing, Inc. Fife Lake, MI 9633 Phone: 23-879-3372 Fax: 23-879-330 TRNSMISSION PROUTS Fife Lake, MI 9633 Phone: 23-879-3372 Fax: 23-879-330 Table Of ontents Engine/ Mount
More informationPIP PN03SA0S01 Piping Material Specification 3SA0S01 Class 300, 304/304L Stainless Steel, Socket Weld, C.A., Process
May 2016 Piping PIP PN03SA0S01 Piping Material Specification 3SA0S01 Class 300, 304/304L Stainless Steel, Socket Weld, 0.000 C.A., Process PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to
More informationR.J.W. LTD. Motorised CNB USER MANUAL. 10. Safe Operation Procedure for cutting Charpy/Izod Notch
10. Safe Operation Procedure for cutting Charpy/Izod Notch 10mm Specimen with 2mm V Notch Caution notes a) DO NOT STALL THE MACHINE! ATTEMPTING TO CUT A MATERIAL WHICH IS TOO HARD OR USING A BROACH WHICH
More informationS5 HAB/HAD SEAT Abductor / Adductor
Number S3-S5/QTY. DESRIPTION SF615 1 NITRO H SET FRME M635 1 LEFT MOVEMENT RM LK639 1 S3 H RNGE SELETOR LEVER S602 1 S3H SET K M634 1 RIGHT MOVEMENT RM LK635 1 S3H IDLER LINKGE SSY LK634 1 S3H SELETOR
More informationcorporation For Technical Support... To Order Parts... Call: Fax: Call: Fax:
c User Manual -osition Regulator 6604 and Kit 6844959 his manual provides installation and operator instructions for Cascade's -osition Regulator. he Regulator enables up to four pressure selections, allowing
More informationWeatherproof Products
Red ot Iberville arlon Weatherproof Products S oxes and overs pplications : S boxes are S approved for wet locations S device boxes are installed in applications that require a rugged unit to accept wiring
More informationK13.12 FACE FIXED PANIC EXIT DEVICE K13 DOORS
K13 DOORS K13.12 FACE FIXED PANIC EXIT DEVICE 01.03.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Base set n
More informationALF400 to 900, ALT-5/-9
uto Feed Lube, uto Feed Tank LF00 to 900, -/-9 Standard Specifications uto feed lube uto feed tank LF00 LF00-0 LF00 LF00 LF00 LF900 - --IS- -9 IR : OIL : Fluid Proof pressure ir. MPa 0. MPa.0 MPa (Note
More information