FORGED STEEL STRUCTURAL HARDWARE SINCE 1864

Transcription

1 OR STL STRUTURL RWR SIN 1864

2 T Reference U W P T N T rip L T

3 ONTNTS pplications... 2, 3 levises... 4 leveland ity orge was established in 1864 to primarily manufacture parts for the marine industry. y the late 1920 s, the product line was expanded to include clevises and turnbuckles for the growing construction market. Since it s beginning, leveland ity orge has made a commitment to quality. Recognizing this, STM in search of industry standards, developed specifications in the early 1950 s for clevis and turnbuckle forgings. These standards are still in use today. leveland ity orge has grown to be a major supplier in the industrial fastener industry. The ability to offer a full range of custom and standard sizes and combine them to create complete assemblies, has enabled them to supply a wide variety of applications and markets. Projects range from new construction to renovations. Some of the most recent domestic projects include the oston Tunnel (oston, M), Jacob s ield (leveland, O), and the airport expansions in New York, leveland and etroit. Internationally, components have been supplied for nuclear power plants in hina and Japan, the Toronto onvention enter, Vancouver irport and applications in urope, the Middle ast, Korea and the Pacific Rim. levis Pins eaded... 5 Straight... 5 yebolts Plain Shoulder ye Nuts Nuts Long oupling Standard oupling ex Jam eavy ex Pad yes Recessed Nuts & Pins Rod nds... 6 Rods Threaded... 6 Upset... 6 Turnbuckles... 7 Turnbuckle ssemblies Jaw & Jaw... 8 Jaw & ye... 8 ook & ook... 9 ook & ye... 9 ye & ye Stub nds Washers: Plate Yoke nds Plain djustable Yoke Pins Product lassification 5 - Metals Structural Metal raming

4 PPLITIONS Jacob s ield - ome of The leveland Indians leveland, Ohio The main support columns of the leveland Indians aseball Stadium are reinforced with a cross-bracing system that include #8 clevises and threaded rods. Metro Toronto onvention entre Toronto, Ontario anada The glass awning structure at the South ntrance of the Metro Toronto onvention entre are supported with #7 and #8 clevises along with threaded rods. Swiss ank orporate eadquarters Stamford, onnecticut The dome effect on the Swiss ank in onnecticut was achieved with the use of an arched beam attached to metal plate with clevises and pins ax:

5 PPLITIONS Northwestern State University Natchitoches, Louisanna Press ox addition was recently constructed at NSU emon ootball Stadium. Structural framing was supported with clevises and threaded rods. The Richmond - San Rafael ridge alifornia leveland ity orge is proud to be providing #8 and #5 clevises along with and 3-1/2 x 6 Turnbuckles to complete a sesmic retrofit to strengthen the bridge. RT Station - Lakefront Line leveland, Ohio Two new large glass awnings were constructed to protect riders from the constantly changing leveland weather. The combination of clevises, turnbuckles and rods were used to support these heavy structures ax:

6 LVISS Material: -1035, S , Stainless Steel Threads: U.N../U.N.. lass 2, Right or Left and, Metric inish: Self-olored, alvanized, Plated, lectro-polished Options: eat Treating, Special Threading Note: Pins Sold Separately - Straight or eaded Table l: Standard levis imensions Part No. levis No. N Thd. Max. U W T Pin Max. P Rated apacity Wt. L /16 5/8 5/8 1 1/16 5/16 + 1/ /16 3/ L25 2 1/2 2 1/2 1 7/8 1 1/4 5/16 + 1/ / /2 L /4 1 3/8 1 1/2 1/2 + 1/16-1/32 5 1/16 1 3/ L35 3 1/2 3 1/2 1 1/2 1 1/2 1 3/4 1/2 + 1/16-1/ L /4 1 3/4 2 1/2 + 1/16-1/ /16 2 1/ L /4 2 1/8 2 1/2 5/8 + 3/ / L /4 2 1/2 3 3/4 + 3/ L /2 7/8 + 1/8-1/ / L /2 + 1/8-1/ /8 4 1/ U N W T T Reference P T rip Maximum working loads have been established with a design factor of 5:1 using the maximum pin diameter, the resulting net area of the eye at the pin hole, and the expected ultimate tensile strength of steel. The maximum tap size (U dimension) shown in Table I, is for reference purposes only. It should be used only to determine the largest tap diameter the clevis may accommodate without considering the pin diameter. Use Table II to select the proper combination of tap size and pin diameter for any given size of clevis. levis sizes in Table II for any given tap size and pin diameter combination are based upon the net area of the eye at the pin hole, being equal to or greater than 125% of the net area at the minor diameter of a round rod without upset ends, threaded Unified National oarse Series. or any combination of tap size and pin diameter shown, the pin in double shear will develop the strength of the rod if both the rod and pin are made from steel having the same physical properties. The pin must be investigated for bending. If inadequate, a larger diameter pin must be selected. If the pin is made from steel with physical properties lower in value than the steel used for the rod, the pin may not develop the strength of the rod and either shear or bend. larger pin diameter would then be required. Some combinations of tap size and pin diameter shown will not develop the maximum working load of the clevis shown in Table I. Selection of the rod and pin, and the material specifications including the clevis size are the responsibility of the purchaser or user. Load required should not exceed the maximum working load values shown in Table I. SSMLIS Material: -1035, -36, S , Stainless Steel Threads: U.N../U.N.. lass 2/2, Right or Left and, Metric inish: Self-olored, alvanized, Plated, lectro-polished ax:

7 iameter of Tap Table li: iameter of Pin 1/2 5/8 3/4 7/ /4 1 1/2 1 3/ /4 2 1/2 2 3/ /4 3 1/2 3 3/ /4 3/ / / /2 2 1/2 2 1/2 2 1/2 3/4 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 7/8 2 1/2 2 1/2 2 1/2 2 1/ / /2 1 1/ /2 1 3/ /2 3 1/ /2 3 1/2 3 1/ / / / / / / / / / / / / / / / / / Part No. Pin ia. Overall LNTS OL Under ead O.. Thickness I.. enter Under ead P008 1/2 2 5/ /16 13/16 7/32 1/8 1 13/16 1/8.13 P010 5/8 2 17/32 2 5/16 1 1/32 7/32 5/32 2 5/32 5/32.24 P012 3/ /4 1 3/16 1/4 3/16 2 9/16 3/16.40 P014 7/8 3 1/2 3 1/4 1 1/4 1/4 13/64 3 1/4.62 P / /32 1 7/16 3/8 13/ /32 1/4.96 P /8 4 5/8 4 1/4 1 5/8 3/8 13/ /16 5/ LVIS PIN: Material: 1018, 1035, 1045, 304SS, and 316SS inish: Self-olored, alvanized, Plated, lectro-polished Options: Other arbon or lloys, eat Treating Note: Includes otter Pins, Other Sizes vailable The pin diameters and lengths represent the standard in-stock items. Since pin diameters and lengths may vary due to the size and grip of the clevis, please provide specific pin dimensions Part No. iameter Overall I.. otter ole P0083 1/2 2 1/2 3/8 9/ P0103 5/8 2 1/2 3/8 9/ P0123 3/4 3 3/8 9/ P0143 7/8 4 5/8 1/ P /8 1/ P /8 4 1/2 5/8 1/ P /4 4 5/8 1/ P /8 4 1/2 5/8 1/ P /2 4 1/2 5/8 1/ P /8 5 5/8 1/ P /4 5 5/8 1/ P /8 3/ LVIS PIN: STRIT Material: -1035, S , Stainless Steel inish: Self-olored, alvanized, Plated, lectro-polished Options: Other arbon or lloys, eat Treating Note: Includes otter Pins, Pin iameter reater Than 2 Up To 4 1/4, Specify 5

8 RO NS Material: -1030/1035, -4140, Stainless Steel Threads: U.N.. lass 2, Right or Left and, Metric inish: Self-olored, alvanized, Plated Options: Other arbon or lloys, eat Treating, Special Threading Note: Stocked items available forged, machined, or to custom specifications orged imensions Part No. R005300K /16 1 1/2 19/32 11/ R006300K /8 3 1/2 3/4 7/ R006300K /8 6 3/4 7/ R007300K /16 6 7/8 1/ R007300K / /8 1/ R008300K /2 3 1/2 31/32 9/ R008300K /2 3 1/2 1 1/8 1/ R008300K /2 6 31/32 9/ R008300K / /8 1/ R008300K / /32 9/ R008300K / /8 1/ R010300K /8 3 1/2 1 1/4 11/ R010300K / /4 11/ R010300K / /4 11/ R012300K /4 3 1/2 1 1/2 13/ R012300K / /2 13/ R012300K / /2 13/ R014300K / /16 15/ R014300K / /16 15/ R100300K /32 1 1/ R100300K /32 1 1/ R104300K / /8 1 5/ R109300K / / TR ROS Material: -1035, -36, Stainless Steel Threads: U.N../U.N.. lass 2, Right or Left and, Metric inish: Self-olored, alvanized, Plated Options: Other arbon or lloys, eat Treating, Special Threading Specify Overall Up To 40 Maximum Part No. Size Per t. RT006 3/ RT008 1/ RT010 5/ RT012 3/ RT014 7/ RT RT / RT / RT / RT / RT / RT / RT / RT RT / RT / RT / RT / RT / RT RT / RT / RT / RT UPST ROS Material: -1035, -36, Stainless Steel Threads: U.N../U.N.. lass 2, Right or Left and, Metric inish: Self-olored, alvanized, Plated Options: Other arbon or lloys, eat Treating, Special Threading Upset iameters rom 1 3/8 to 5 1/ ax:

9 Part No. Thread iameter Take Up T ody L Nut nd Rated apacity T01 3/8 x 6 7 1/8 9/ T03 1/2 x 3 4 7/8 15/ T04 1/2 x 4 5 9/16 25/ T05 1/2 x 6 7 9/16 25/ T06 1/2 x /16 25/ T07 1/2 x /16 25/ TX8 5/8 x 3 4 7/8 15/ T08 5/8 x 4 5 7/8 15/ T09 5/8 x 6 7 7/8 15/ T10 5/8 x /8 15/ T11 5/8 x /8 15/ T13 3/4 x 6 8 1/8 1 1/ T14 3/4 x /8 1 1/ T15 3/4 x /8 1 1/ T18 7/8 x 6 8 5/8 1 5/ T19 7/8 x /8 1 7/ T21 1 x 6 8 7/8 1 7/ T22 1 x /8 1 7/ T26 1 1/8 x 6 9 1/8 1 9/ T27 1 1/8 x /8 1 9/ T29 1 1/4 x 6 9 1/8 1 9/ T30 1 1/4 x /8 1 9/ T33 1 3/8 x 6 9 5/8 1 13/ T34 1 3/8 x /4 1 7/ T35 1 1/2 x 6 9 3/4 1 7/ T36 1 1/2 x /4 1 7/ T39 1 5/8 x / T40 1 5/8 x /2 2 3/ T41 1 3/4 x / T42 1 3/4 x / T45 1 7/8 x /8 2 13/ T46 1 7/8 x /2 2 3/ T49 2 x /8 2 13/ T50 2 x /2 2 3/ T53 2 1/4 x /8 3 5/ T54 2 1/4 x /8 3 13/ T57 2 3/8 x /2 3 3/ T58 2 1/2 x /2 3 3/ T59 2 1/2 x /2 3 3/ T63 2 3/4 x /8 4 3/ T65 2 3/4 x /2 5 1/ T67 2 7/8 x /4 4 3/ T68 3 x /8 4 5/ T70 3 x /2 5 1/ T80 3 1/4 x /8 5 7/ T82 3 1/4 x /2 5 1/ T85 3 1/2 x /8 5 7/ T87 3 1/2 x /2 5 1/ T88 3 3/4 x T93 4 x T98 4 1/2 x /2 6 3/ TURNUKLS Material: -1035, S , Stainless Steel Threads: U.N../U.N.. lass 2, Right or Left and, Metric inish: Self-olored, alvanized, Plated, lectro-polished Options: Other lloys; eat Treating, Special Threading Specifications: omplies to STM L T Sizes 3/8 to 1 3/4 Sizes 1 7/8 to 4 1/ ax:

10 TURNUKL SSMLIS J I Material: Threads: U.N.. lass 2, Right or Left and inish: alvanized JW Y SSMLY: JW & JW Turnbuckle Thd. Take Overall Rated ia. Up Jaw losed apacity Part No. T J TJJ004 1/4 X 4 7/16 5/8 1/4 7/32 5/ TJJ005 5/16 X 4 1/2 1/2 3/4 1/4 1/4 11/ TJJ006 3/8 X 6 9/16 13/16 5/16 5/16 13/ TJJ008 1/2 X 6 5/8 1 7/16 3/ TJJ /2 X 9 5/8 1 7/16 3/ TJJ /2 X 12 5/8 1 7/16 3/ TJJ010 5/8 X 6 3/4 1 5/16 1/2 7/16 1 5/ TJJ /8 X 9 3/4 1 5/16 1/2 7/16 1 5/ TJJ /8 X 12 3/4 1 5/16 1/2 7/16 1 5/ TJJ012 3/4 X 6 15/16 1 1/2 5/8 7/16 1 5/ TJJ /4 X 9 15/16 1 1/2 5/8 7/16 1 5/ TJJ /4 X 12 15/16 1 1/2 5/8 7/16 1 5/ TJJ014 7/8 X /16 1 3/4 3/4 1/2 1 3/ TJJ100 1 X 6 1 3/ /8 2 1/ TJJ X / /8 2 1/ SSMLY: JW & Y Turnbuckle Thread Take Overall Rated Part No. ia. Up ye Jaw losed apacity T I J TJ004 1/4 x 4 1/2 1 1/4 7/16 5/8 1/4 7/32 5/ TJ005 5/16 x 4 1/2 5/8 1 1/4 5/16 1/2 3/4 1/4 1/4 11/ TJ006 3/8 x 6 3/4 1 1/2 3/8 9/16 13/16 5/16 5/16 13/ TJ008 1/2 x /16 7/16 5/8 1 7/16 3/ TJ /2 x /16 7/16 5/8 1 7/16 3/ TJ /2 x /16 7/16 5/8 1 7/16 3/ TJ010 5/8 x 6 1 3/8 2 1/2 9/16 3/4 1 15/16 1/2 7/16 1 5/ TJ /8 x 9 1 3/8 2 1/2 9/16 3/4 1 15/16 1/2 7/16 1 5/ TJ /8 x /8 2 1/2 9/16 3/4 1 15/16 1/2 7/16 1 5/ TJ012 3/4 x 6 1 1/2 2 13/16 21/32 15/16 1 1/2 5/8 7/16 1 5/ TJ /4 x 9 1 1/2 2 13/16 21/32 15/16 1 1/2 5/8 7/16 1 5/ TJ /4 x /2 2 13/16 21/32 15/16 1 1/2 5/8 7/16 1 5/ TJ014 7/8 x /16 3 1/4 3/4 1 1/16 1 3/4 3/4 1/2 1 3/ TJ100 1 x /16 3 9/16 7/8 1 3/ /8 2 1/ TJ x /16 3 9/16 7/8 1 3/ /8 2 1/ ax:

11 TURNUKL SSMLIS L T OOK TURNUKL Turnbuckle Thread Take Overall Rated ia. Up ook losed apacity Part No. T T004 1/4 x 4 3/8 1/4 9/32 8 1/ T005 5/16 x 4 1/2 1/2 5/16 13/32 9 9/ T006 3/8 x 6 19/32 3/8 17/ / T008 1/2 x 6 13/16 1/2 21/ T /2 x 9 13/16 1/2 21/ / T /2 x 12 13/16 1/2 21/ / T010 5/8 x 6 7/8 5/8 15/ T /8 x 9 7/8 5/8 15/ / T /8 x 12 7/8 5/8 15/ / T012 3/4 x 6 1 3/4 31/ / T /4 x 9 1 3/4 31/ / T /4 x /4 31/ / T014 7/8 x /8 7/8 1 1/4 27 1/ T100 1 x 6 1 5/ /4 21 1/ T x / /4 26 5/ SSMLY: OOK & OOK Turnbuckle Thread Take Overall Rated Part No. ia. Up ye ook losed apacity T I T004 1/4 x 4 1/2 1 1/4 1/4 9/32 3/8 8 1/ T005 5/16 x 4 1/2 5/8 1 1/4 5/16 5/16 13/32 1/2 9 9/ T006 3/8 x 6 3/4 1 1/2 3/8 3/8 17/32 19/ / T008 1/2 x /16 7/16 1/2 21/32 13/ T /2 x /16 7/16 1/2 21/32 13/ / T /2 x /16 7/16 1/2 21/32 13/ / T010 5/8 x 6 1 3/8 2 1/2 9/16 5/8 15/16 7/ T /8 x 9 1 3/8 2 1/2 9/16 5/8 15/16 7/8 19 1/ T /8 x /8 2 1/2 9/16 5/8 15/16 7/8 21 3/ T012 3/4 x 6 1 1/2 2 13/16 21/32 3/4 31/ / T /4 x 9 1 1/2 2 13/16 21/32 3/4 31/ / T /4 x /2 2 13/16 21/32 3/4 31/ / T014 7/8 x /16 3 1/4 3/4 7/8 1 1/4 1 1/8 27 1/ T100 1 x /16 3 9/16 7/ /4 1 5/ / T x /16 3 9/16 7/ /4 1 5/ / SSMLY: OOK & Y ax:

12 TURNUKL SSMLIS I Material: Threads: U.N.. lass 2, Right or Left and inish: alvanized Y STU N SSMLY: Y & Y Turnbuckle Thread Take Overall Rated Part No. ia. Up ye losed apacity T I T004 1/4 x 4 1/2 1 1/4 8 1/ T005 5/16 x 4 1/2 5/8 1 1/4 5/16 9 9/ T006 3/8 x 6 3/4 1 1/2 3/8 11 7/ T008 1/2 x /16 7/ T /2 x /16 7/ / T /2 x /16 7/ / T010 5/8 x 6 1 3/8 2 1/2 9/ T /8 x 9 1 3/8 2 1/2 9/ / T /8 x /8 2 1/2 9/ / T012 3/4 x 6 1 1/2 2 13/16 21/ / T /4 x 9 1 1/2 2 13/16 21/ / T /4 x /2 2 13/16 21/ / T014 7/8 x /16 3 1/4 3/4 27 1/ T100 1 x /16 3 9/16 7/8 21 1/ T x /16 3 9/16 7/8 26 5/ STU NS Part No. Thread ia. Turnbuckle Take Up T Overall losed Nut nd of One Stub Rated apacity T01 3/8 x /8 9/ T03 1/2 x /8 15/ T04 1/2 x /16 25/ T05 1/2 x /16 25/ T06 1/2 x /8 25/32 9 1/ T07 1/2 x /16 25/ TX8 5/8 x /8 15/ T08 5/8 x /8 15/ T09 5/8 x /8 15/ T10 5/8 x /8 15/16 9 1/ T11 5/8 x /8 15/ T13 3/4 x /2 1 1/16 8 1/ T14 3/4 x /8 1 1/ T15 3/4 x /8 1 1/ / T18 7/8 x /8 1 5/ T19 7/8 x /8 1 7/ T21 1 x /8 1 7/16 9 1/ T22 1 x /8 1 7/ / ax:

13 Part No. Reference Rated apacity P004 1/4 1 3/4 1 3/ P005 5/16 1 1/8 7/8 1 7/ P006 3/8 1 1/ / P007 7/16 1 3/8 1 3/ / P008 1/2 1 1/2 1 3/16 2 1/ P009 9/16 1 5/8 1 9/32 2 9/ P010 5/8 1 3/4 1 3/8 2 1/ P012 3/ /2 2 13/ P014 7/8 2 1/4 1 11/16 3 1/ P /2 1 13/16 3 9/ P /8 2 3/ P / /16 4 7/ P /2 3 1/2 2 1/2 5 3/ P /4 3 3/4 2 7/8 6 1/ P /4 6 7/ P / / YOLTS: PLIN Material: -1030, Stainless Steel Threads: U.N../U.N.. lass 2, Right or Left and, Metric inish: Self-olored, alvanized, Plated, lectro-polished Options: Longer Shank s, Special Threading, Other lloys Specifications: II Standards STM 489, NSI/SM Note: 2-1/2 Thread Run-Out on Threaded Portion WRNIN: Rated capacity is dramatically reduced when load capacity at any angle. Loading must never be made at an angle greater than 45º from the bolt centerline. Rated capacity is reduced to 25% of the tabulated value at an angle of 45º. Part No. Reference Rated apacity S004 1/4 1 3/4 1 3/ /32 13/16 17/ S005 5/16 1 1/8 7/8 1 7/ /64 31/32 19/ S006 3/8 1 1/ / /16 1 5/32 11/ S /8 3/ / /16 1 5/32 11/ S /8 5/ / /16 1 5/32 11/ S007 7/16 1 3/8 1 3/ / /64 1 5/16 25/ S008 1/2 1 1/2 1 3/16 2 1/ /32 1 7/16 7/ S / /16 2 1/ /32 1 7/16 7/ S009 9/16 1 5/8 1 9/32 2 9/ / /32 31/ S010 5/8 1 3/4 1 3/8 2 1/ /4 1 23/32 1 1/ S /8 1 1/4 1 3/8 2 1/ /4 1 23/32 1 1/ S012 3/ /2 2 13/ / /32 1 1/ S /4 1 1/2 1 1/2 2 13/ / /32 1 1/ S014 7/8 2 1/4 1 11/16 3 1/ /8 2 3/16 1 7/ S /2 1 13/16 3 9/ / /32 1 9/ S /8 2 3/ / / / S / /16 4 7/ /2 2 15/16 1 7/ S /2 3 1/2 2 1/2 5 3/ /16 3 7/16 2 3/ S /4 3 3/4 2 7/8 6 1/ /8 3 31/32 2 1/ P /4 6 7/ /4 4 1/2 2 7/ YOLTS: SOULR Material: -1030, Stainless Steel Threads: U.N.. lass 2, Right or Left and, Metric inish: Self-olored, alvanized, Plated, lectro-polished Options: Longer Shank s, Special Threading, Other lloys Specifications: II Standards STM 489, NSI/SM Note: 2-1/2 Thread Run-Out on Threaded Portion yebolts meet STM 489, NSI/SM ax:

14 YOK NS: PLIN Material: Threads: U.N.. / U.N.. lass 2, Right or Left and inish: Self-olored, Plated Options: Special Machining and Threading imensions In Inches Part No. K YP /4 1/4 5/8 9/32 5/8 1/4 1 1/8 1/ YP /16 3/4 11/32 3/4 5/16 1 1/4 19/ YP /8 3/8 27/32 7/16 7/8 3/8 1 9/32 11/ YP /4 7/16 1 1/2 1 7/16 1 1/4 13/ YP /2 1/2 1 1/8 9/16 1 1/8 1/2 1 3/8 15/ YP /8 5/8 1 7/16 11/16 1 3/8 5/8 1 7/16 1 3/ YP /8 3/4 1 11/16 13/16 1 5/8 3/4 1 15/16 1 7/ YP /8 2 15/16 1 7/8 7/ / YP /2 1 1/16 2 1/ /2 1 15/ K YOK NS: JUSTL Material: Threads: U.N.. / U.N.. lass 2, Right or Left and inish: Self-olored, Plated Options: Special Machining and Threading Part No. imensions In Inches K Tap Thread Y /16 1 1/4 9/32 5/8 1/4 3/4 1/2 1/ Y /4 1/2 1 7/16 11/32 3/4 5/16 13/16 19/32 5/ Y /2 5/8 1 5/8 7/16 7/8 3/8 7/8 11/16 3/ Y /8 23/32 1 7/8 1/2 1 7/ /16 7/ Y /16 1 7/8 9/16 1 1/8 1/2 1 1/8 15/16 1/ Y /16 1 1/ /16 11/16 1 3/8 5/8 1 1/4 1 3/16 5/ Y /16 1 1/4 4 9/16 13/16 1 5/8 3/4 1 1/2 1 7/16 3/ K Tap YOK PINS Material: inish: Self-olored, Plated 20º N imensions In Inches otter Pin Min. Part No. M N PY004 1/4 3/8 3/32 43/64 49/64 55/64 1/16 7/ PY005 5/16 7/16 3/32 13/16 15/16 1 1/32 3/32 1/ PY006 3/8 1/2 1/8 15/16 1 1/16 1 3/16 3/32 5/ PY007 7/16 9/16 5/32 1 1/16 1 3/ /32 3/32 3/ PY008 1/2 5/8 5/ / / /64 1/8 7/ PY010 5/8 13/16 13/ / / /16 1/ PY012 3/4 15/16 1/4 1 23/ /32 2 5/32 5/32 1 1/ M ax:

15 Y NUTS Material: -1030, Stainless Steel Threads: U.N../U.N.. lass 2, Right or Left and, Metric inish: Self-olored, alvanized, Plated, lectro-polished Options: Other lloys; eat Treating, Special Threading Note: Not Recomended or Lifting. Part No. Tapped R Tap Size ail Size Thread I.. O.. Overall ell I.. ail Thickness Shoulder Width I Rated apacity N05-1 3/8 1/2 5/8 1 1/4 1 3/4 2 1/2 13/16 1 9/16 3/8 31/ N05-2 1/2 1/2 5/8 1 1/4 1 3/4 2 1/2 13/16 1 9/16 3/8 31/ N10-1 3/8 1 11/16 1 1/2 2 1/4 3 3/16 1 3/16 2 1/2 1 3/ N10-2 1/2 1 11/16 1 1/2 2 1/4 3 3/16 1 3/16 2 1/2 1 3/ N10-3 5/8 1 11/16 1 1/2 2 1/4 3 3/16 1 3/16 2 1/2 1 3/ N10-4 3/4 1 11/16 1 1/2 2 1/4 3 3/16 1 3/16 2 1/2 1 3/ N20-1 7/ /4 4 3/8 1 11/16 2 5/8 3/4 1 15/ N /4 4 3/8 1 11/16 2 5/8 3/4 1 15/ N / /4 2 1/2 4 1/4 5 5/8 1 13/16 3 3/ / N / /4 2 1/2 4 1/4 5 5/8 1 13/16 3 3/ / N / /4 2 1/2 4 1/4 5 5/8 1 13/16 3 3/ / N / / / /4 1 1/ N / / /4 1 1/ N / / / /4 1 1/ N / / / /4 1 1/ Maximum Working Loads as een stimated With Safety actor 5:1 I Y NUTS Material: -1030, Stainless Steel Threads: U.N.. lass 2, Right or Left and, Metric inish: Self-olored, alvanized, Plated, lectro-polished Options: Other lloys; eat Treating, Special Threading Note: Not Recomended or Lifting Part No. Tapped R Tap Size Thread I.. O.. Overall ell I.. ail Thickness Rated apacity NS /8 5/8 1 1/ /2 7/8 1 1/2 3/ NS /2 5/8 1 1/ /2 7/8 1 1/2 3/ NS /8 3/4 1 1/2 2 1/ /8 1 3/4 1/ NS /4 3/4 1 1/2 2 1/ /8 1 3/4 1/ NS / / /16 3 7/ NS / /16 3 7/ ax:

16 P YS Material: inish: Self-olored Note: Not Recomended for Lifting Part No. Width Shoulder I.. ye O.. ye Overall P /2 1/2 15/16 1 5/ P /16 5/8 1 13/16 1 9/ P /2 3/4 1 13/16 1 3/ P /16 7/8 1 7/ / P / / P /8 1 3/16 2 1/8 2 7/ P /8 2 9/ P /8 1 1/2 2 13/16 3 1/ Widely Used On arm Machinery, Trucks, Steel ulled Marine Vessels nd Material andling quipment RSS NUTS & PINS Material: STM -36, 4140, Stainless Steel Threads: U.N.., lass 2, Right or Left and inish: Self-olored, Plated Options: Special Machining and Threading d T c NUT (Suggested imensions) Pin iameter Thread Recess Sizes d iameter (In.) T c t W Rough iameter epth s iameter Rough ole 2 2 1/4 1 1/2 1 1/8 7/ /8 2 5/8 1/4 1 1/ /2 2 3/ /8 1/ /8 4 1/8 3 1/8 1/4 1 3/ /4 3 1/2 2 1/2 1 1/4 1/8 1 1/8 4 3/ /8 3/8 2 1/ / /8 1/4 1 1/4 4 7/8 5 5/8 4 3/8 3/8 2 3/ /4 4 1/2 4 3/4 3 1/2 1 1/2 1/4 1 3/8 5 3/4 6 5/8 5 1/4 1/2 3 1/ / /8 1/4 1 1/2 6 1/4 7 1/4 5 3/4 1/2 3 3/ /2 5 3/ /2 1 3/4 1/4 1 5/ /8 6 1/2 5/8 4 1/ /4 6 1/ /8 3/8 1 3/4 7 5/8 8 7/8 7 5/8 4 3/ / /2 2 3/8 1 7/8 8 1/8 9 3/8 7 1/2 3/4 5 1/ /4 7 1/2 5 1/2 2 3/8 1 7/8 8 5/ /4 5 1/ / / /4 3/8 2 1/8 9 3/8 10 7/8 8 3/4 3/4 5 3/ /2 8 3/ /4 3/8 2 1/8 10 1/4 11 7/8 9 5/8 3/4 5 3/ /4 9 1/ /8 3/8 2 1/4 11 1/ /8 3/4 5 3/ / /8 3/8 2 1/4 11 1/ /8 3/4 5 3/4 32 W t S ax:

17 Part No. Thread iameter x L Width W NS012 3/4 x 5 1 1/ NS014 7/8 x 7 1 3/ NS100 1 x 7 1 5/ NS /4 x 7 1/ NS /2 x 8 2 1/ NS200 2 x 9 3 1/ NUTS: LON OUPLIN Material: 12L14 arbon Steel, Stainless Steel Threads: U.N.. lass 2, Right or Left and inish: Self-olored, alvanized, Plated L 1/2 L W Part No. Thread iameter x L Width W N006 3/8 x 1 3/4 5/ N008 1/2 x 1 1/4 5/ N010 5/8 x 2 1/8 13/ N012 3/4 x 2 1/ N014 7/8 x 2 1/2 1 1/ N100 1 x 2 3/4 1 3/ N /8 x 3 1 5/ N /4 x 3 1 5/ N /8 x 3 3/8 1 7/ N /2 x 3 1/ N /4 x 5 2 3/ N200 2 x 4 1/2 2 3/ N /4 x 5 3 1/ N /2 x 5 1/2 3 1/ N /4 x 6 1/ N300 3 x 6 3/ NUTS: STNR OUPLIN Material: 12L14 arbon Steel, Stainless Steel Threads: U.N../U.N.. lass 2, Right or Left and inish: Self-olored, alvanized, Plated Note: To 4 Rod iameter W L Width cross orner Thread iameter Width cross asic Min Max Per Part No. W 100 NJ006 3/8 11/ NJ008 1/2 7/ NJ010 5/8 1 1/ NJ012 3/4 1 1/ NJ / NJ /8 1 13/ NJ / NJ /8 2 3/ NJ /2 2 3/ NJ /8 2 9/ NJ /4 2 3/ NJ /8 2 15/ NJ / NJ /4 3 1/ NJ /2 3 7/ NK /4 4 1/ NJ / NUTS: X JM Material: STM -563 arbon Steel, Stainless Steel Threads: U.N.. lass 2, Right or Left and inish: Self-olored, alvanized, Plated Note: To 4 Rod iameter W ax:

18 NUTS: VY X Material: STM -563 arbon Steel, Stainless Steel Threads: U.N../U.N.. lass 2, Right or Left and inish: Self-olored, alvanized, Plated Note: To 4 Rod iameter W N Thread iameter Width cross asic Width cross orner Min Max Part No. W N Thickness asic Per 100 N004 1/4 1/ / N005 5/16 9/ / N006 3/8 11/ / N007 7/16 3/ / N008 1/2 7/ / N009 9/16 15/ / N010 5/8 1 1/ / N012 3/4 1 1/ / N014 7/8 1 7/ / N / / N /8 1 13/ / N / / N /8 2 3/ / N /2 2 3/ / N /8 2 9/ / N /4 2 3/ / N /8 2 15/ / N / / N /4 3 1/ / N /2 3 7/ / N /4 4 1/ / N / / N / / N /2 5 3/ / N /4 5 3/ / N / / WSRS: LT PLT Thickness: through 1 Material: arbon, lloy, Stainless Steel inish: Self-olored, galvanized, Plated, lectro-polished Note: To 4 Rod iameter Part No. Rod Size Outside iameter Inside iameter Per 100 W006 3/8 1 7/ W008 1/2 1 3/8 9/ W010 5/8 1 3/4 11/16 77 W012 3/4 2 13/ W /2 1 1/ W /8 2 3/4 1 1/4 220 W / /8 260 W /8 3 1/4 1 1/2 333 W /2 3 1/2 1 5/8 385 W /8 3 3/4 1 3/4 448 W / /8 500 W /8 4 1/ W /2 2 1/8 630 W /4 4 3/4 2 3/8 826 W / /8 961 W /4 5 1/4 2 7/ W /2 3 1/ ax:

19 K Tap or additional brochures or pricing information, contact leveland ity orge at: or visit our website at W N

20 State Route 18 West, Wellington, Ohio ax: V6.02