Prep-Air II. Miniature FRL Series. Catalogue: PDE2591TCUK-ca Edition: May 2007

Transcription

1 Prep-ir II atalogue: P259TUK-ca dition: May 27

2 P259TUK-ca Important! efore carrying out any service work, ensure that the valve and manifold have been vented. Remove the primary supply air hose to ensure total disconnection of the air supply before dismantling valves or blank connection blocks. N! ll technical data in this catalogue is typical only. The air quality is decisive for the valve life: see ISO WRNING ILUR OR IMPROPR SLTION OR IMPROPR US O TH PROUTS N/OR SYSTMS SRI HRIN OR RLT ITMS N US TH, PRSONL INJURY N PROPRTY MG. This document and other information from, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. ue to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by and its subsidiaries at any time without notice. SL ONITIONS The items described in this document are available for sale by, its subsidiaries or its authorized distributors. ny sale contract entered into by Parker will be governed by the provisions stated in Parker s standard terms and conditions of sale (copy available upon request).

3 P259TUK-ca ir Line ilters Miniature ir Line oalescing ilters Miniature ir Line Regulators Miniature 4R ir Line ilter / Regulators Miniature ir Line Lubricators Miniature 4L Mounting racket Kits...4 Safety Guide Offer of Sale...7 UTION: Polycarbonate bowls and sight domes, being transparent and tough, are ideal for use with ilters and Lubricators. They are suitable for use in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact blow, nor temperatures outside of the rated range. s with most plastics, some chemicals can cause damage. Polycarbonate bowls and sight domes should not be exposed to chlorinated hydro-carbons, ketones, esters and certain alcohols. They should not be used in air systems where compressors are lubricated with fire-resistant fluids such as phosphate ester and di-ester types. Metal bowls are recommended where ambient and/or media conditions are not compatible with polycarbonate bowls. Metal bowls resist the action of most such solvents, but should not be used where strong acids or bases are present or in salt laden atmospheres. onsult the factory for specific recommendations where these conditions exist. TO LN POLYRONT OWLS US MIL SOP N WTR ONLY! O NOT use cleansing agents such as acetone, benzene, carbon tetrachloride, gasoline, toluene, etc., which are damaging to this plastic. Metal bowl guards are recommended for all applications. UTION: RGULTOR PRSSUR JUSTMNT The working range of knob adjustment is designed to permit outlet pressures within their full range. Pressure adjustment beyond this range is also possible because the knob is not a limiting device. This is a common characteristic of most industrial regulators, and limiting devices may be obtained only by special design. 3

4 P259TUK-ca 4 Series /8", /4" asic /8" ody 4 ilters - Miniature Twist rain utomatic rain eatures xcellent water removal efficiency. Unique deflector plate that creates swirling of the air stream ensuring maximum water and dirt separation. 5 micron element standard. High low: /8" l/s /4" l/s utomatic rain ccepts 4mm /8" Tubing / x.75 I / tubing istance Required To Remove ll owls Regardless Of rain Option Port Size Poly owl Twist rain SPP Standard part numbers shown bold. or other models refer to ordering information below. L/s = 6.2 bar inlet and.3 bar pressure drop. or polycarbonate bowl see aution on page 3. utomatic Pulse rain /8" 4 45 /4" ilter imensions 39) With utomatic Pulse rain. Ordering Information 4 Port size owl options lements Port type /8 Inch Twist drain 5 Micron lank NPT /4 Inch 5 utomatic pulse drain SPP NOT: OL OPTIONS R STNR. 4

5 P259TUK-ca 4 Series ir Line ilters Technical Information Primary Pressure - bar 2.4 bar 6.2 bar.3 bar Primary Pressure - bar 2.4 bar 6.2 bar.3 bar.6.6 Pressure drop - bar low characteristics 4* /8 Inch ports 5 5 low - dm 3 /s Pressure drop - bar low characteristics 4* /4 Inch ports 5 5 low - dm 3 /s 4 ilter Kits & ccessories Materials of onstruction owl Kits Poly owl utomatic Pulse rain...ps48p Twist rain... PS44P ilter lement Kits 5 Micron... PS43P Mounting racket Kit... PS47P Specifications utomatic Pulse rain Tube arb... 4mm O / x.75 I / owl apacity... 3 cm 3 Port Threads... /8, /4 Inch Pressure & Temperature Ratings Polycarbonate owl... to.3 bar to 52 utomatic Pulse rain...7 to 7.2 bar at 52 or less Weight...8 gm ody...zinc owl...transparent Polycarbonate eflector, lement Holder & affle...plastic rains Twist rain ody & Stem...Plastic Seals...Nitrile utomatic Pulse rain Piston & Seals...Nitrile Stem, Seat, daptor & Washers... luminum ilter lements 5 Micron (Standard)...Plastic Seals...Nitrile 5

6 P259TUK-ca Series /8", /4" asic /8" ody oalescing ilters - Miniature eatures Removes liquid aerosols and sub-micron particles. Liquids gravitate to the bottom of the element and will not re-enter the airstream. Oil free air for critical applications, such as air gauging and pneumatic instrumentation and controls % OP efficiency. High low: Grade 6 lement /8" 8 l/s /4" 9 l/s utomatic rain ccepts 4mm /8" Tubing / x.75 I / tubing istance Required To Remove ll owls Regardless Of rain Option Port Size Poly owl Twist rain SPP L/s = 6.2 bar inlet and.3 bar pressure drop. or polycarbonate bowl see aution on page 3. utomatic Pulse rain /8" 5 /4" 5 oalescing ilter imensions , With utomatic Pulse rain. Ordering Information - Port size owl options lements Port type /8 Inch Twist drain. um lank NPT /4 Inch 5 utomatic pulse drain SPP NOT: OL OPTIONS R STNR. 6

7 P259TUK-ca Series oalescing ilters (Oil Removal) Technical Information Grade 6 Primary Pressure - bar 2.4 bar 6.2 bar.3 bar Primary Pressure - bar 2.4 bar 6.2 bar.3 bar.6.6 Pressure drop - bar low characteristics * /8 Inch ports Pressure drop - bar low characteristics * /4 Inch ports 5 5 low - dm 3 /s low - dm 3 /s 2 oalescing ilter Kits & ccessories Materials of onstruction owl Kits Poly owl utomatic Pulse rain...ps48p Twist rain...ps44p ilter lement Kits. um...ps446p Mounting racket Kit...PS47P Specifications utomatic Pulse rain Tube arb... 4mm O / x.75 I / owl apacity... 3cm 3 Operation Normal Operating Pressure rop.... bar Maximum Recommended Pressure rop....7 bar (lement should be replaced) Port Threads.../8, /4 Inch Pressure & Temperature Ratings Polycarbonate owl to.3 bar to 52 Weight... 8 gm ody... Zinc owls... Transparent Polycarbonate rains Twist rain ody & Stem... Plastic Seals...Nitrile utomatic Pulse rain Piston & Seals...Nitrile Stem, Seat, daptor & Washers...luminum lement Holder... Plastic ilter lement orosilicate & felt glass fibers 99.97% OP efficiency Seals...Nitrile 7

8 P259TUK-ca 4R Series /8", /4" asic /8" ody 4R Regulators - Miniature eatures Unbalanced poppet standard. Solid control piston with lip seal for extended life. Non-rising adjusting knob. ompact, 73,2mm high by 42mm wide. High low: /8" 6 l/s /4" 7 l/s 4R Port Size 8 bar - SP 4R Regulator imensions Without Gauge /8" 4R3 4R ,5 73 /4" 4R3 Standard part numbers shown bold. or other models refer to ordering information below. NOT: 3mm dia. hole required for panel mounting. L/s = 6.9 bar inlet, 6.2 bar no flow secondary setting and.7 bar pressure drop. Ordering Information 4 R 3 Port size Pressure range Relief Port type Port size /8 Inch pipe /8 Inch gauge port /4 Inch pipe /8 Inch gauge port 3 Without gauge - Yellow knob 2 bar 4 bar 8 bar G Relieving Non-Relieving lank NPT SPP NOT: OL OPTIONS R STNR. 8

9 P259TUK-ca 4R Series ir Line Regulators Technical Information Relief and low haracteristics Relief and low haracteristics 4R3* 4R3* 6 6 Secondary pressure - bar /8 Inch Ports 6.9 bar Primary Pressure Secondary pressure - bar /4 Inch Ports 6.9 bar Primary Pressure low - dm 3 /s low - dm 3 /s UTION: RGULTOR PRSSUR JUSTMNT The working range of knob adjustment is designed to permit outlet pressures within their full range. Pressure adjustment beyond this range is also possible because the knob is not a limiting device. This is a common characteristic of most industrial regulators, and limiting devices may be obtained only by special design. or best performance, regulated pressure should always be set by increasing the pressure up to the desired setting.! WRNING Product rupture can cause serious injury. o not connect regulator to bottled gas. o not exceed maximum primary pressure rating. 4R Regulator Kits & ccessories Specifications onnet ssembly Kit... L369 Gauges to 2 bar - /8...P3-KYN to 4 bar - /8...P3-KLN to bar - /8...P3-KNN Mounting racket Kit (Includes Panel Mount Nut) PS47P Panel Mount Nuts Plastic...P78652 Metal...P53 Service Kits Non-Relieving...PS422P Relieving...PS423P Gauge Ports (2)... /8 (an be used for ull low) Port Threads.../8, /4 Inch Pressure & Temperature Ratings to 2.7 bar to 52 Secondary Pressure Ranges Standard Pressure... to 8 bar Medium Pressure... to 4 bar Medium Pressure... to 2 bar Weight 4R... 4 gm Materials of onstruction djusting Nut...rass djusting Stem & Spring...Steel ody... Zinc onnet, Seat, Piston & Valve Poppet... Plastic Seals...Nitrile 9

10 P259TUK-ca 4 Series /8", /4" asic /8" ody 4 ilter / Regulator - Miniature eatures xcellent water removal efficiency. Unbalanced poppet standard. Solid control piston for extended life. Space saving package offers both filter and regulator features in one integral unit. Non-rising adjustment knob. Two full flow /8" gauge ports. High low: /8" 7 l/s /4" 8 l/s utomatic rain Port Size Poly owl 8 bar - SPP Twist rain utomatic Pulse rain /8" /4" ccepts 4mm /8" Tubing / x.75 I / tubing istance Required To Remove ll owls Regardless Of rain Option 4 ilter / Regulator imensions Standard part numbers shown bold. or other models refer to ordering information below. L/s = 6.9 bar inlet, 6.2 bar no flow secondary setting and.7 bar pressure drop. or polycarbonate bowl see aution on page 3. NOT: 3mm hole required for panel mounting With uto rain 58 Ordering Information 4 3 Port size owl options lements Relief Port type /8 Inch Twist drain 5 Micron Relieving lank NPT /4 Inch 5 utomatic drain G Non-Relieving SPP 3 Pressure range Without gauge - Yellow knob 2 bar 4 bar 8 bar NOT: OL OPTIONS R STNR.

11 P259TUK-ca 4 Series ilter / Regulator "Piggybacks" Technical Information Relief and low haracteristics Relief and low haracteristics 43* 43* Secondary pressure - bar /8 Inch Ports 6.9 bar Primary Pressure Secondary pressure - bar /4 Inch Ports 6.9 bar Primary Pressure low - dm 3 /s low - dm 3 /s UTION: RGULTOR PRSSUR JUSTMNT The working range of knob adjustment is designed to permit outlet pressures within their full range. Pressure adjustment beyond this range is also possible because the knob is not a limiting device. This is a common characteristic of most industrial regulators, and limiting devices may be obtained only by special design. or best performance, regulated pressure should always be set by increasing the pressure up to the desired setting. 4 ilter / Regulator Kits & ccessories owl Kits Poly owl utomatic rain... PS48P Twist rain... PS44P ilter lement Kits 4 Micron... PS4P 5 Micron... PS43P Gauges to 2 bar - /8...P3-KYN to 4 bar - /8...P3-KLN to bar - /8...P3-KNN Mounting racket Kit (Includes Panel Mount Nut)...PS47P Panel Mount Nut...P78652 Service Kits Non-Relieving... PS422P Relieving... PS423P Specifications! WRNING Product rupture can cause serious injury. o not exceed maximum primary pressure rating. utomatic Pulse rain Tube arb...4mm O / x.75 I / owl apacity... 3 cm 3 Gauge Ports (2) (an be used for ull low)... /8 Inch Port Threads... /8, /4 Inch Pressure & Temperature Ratings Polycarbonate owl... to.3 bar, to 52 Secondary Pressure Ranges Standard Pressure... to 8 bar Medium Pressure... to 2 bar Medium Pressure... to 4 bar Weight... 8 gm Materials of onstruction djusting Nut... rass djusting Stem & Spring... Steel ody... Zinc onnet, Knob, Seat, Piston, Holder & eflector...plastic owl vailable Transparent... Polycarbonate rains Manual Twist Type ody & Stem...Plastic Seals... Nitrile utomatic Pulse Type Piston & Seals... Nitrile Stem, Seat, daptor & Washers... luminum ilter lements 5 Micron (Standard)...Plastic Seals...Nitrile

12 P259TUK-ca 4L Series /8", /4" asic /8" ody 4L Mist Lubricators - Miniature eatures Proportional oil delivery over a wide range of air flows. Precision needle valve assures repeatable oil delivery and provides simple adjustment of delivery rate. Ideal for low and high flow applications with changing air flow. Transparent sight dome for 36 visibility. High low: /8" 9 l/s /4" l/s istance Required To Remove ll owls Regardless Of rain Option Port SPP Size No rain Poly owl /8" 4LG /4" 4LG 44 4L Lubricator imensions 4 55 Standard part numbers shown bold. or other models refer to ordering information below. L/s = 6.2 bar inlet and.3 bar pressure drop or polycarbonate bowl see aution on page Ordering Information 4 L G - Port size Port type /8 Inch lank NPT /4 Inch SPP NOT: OL OPTIONS R STNR. 2

13 P259TUK-ca 4L Series ir Line Mist Lubricator Technical Information Primary Pressure - bar 2.4 bar 6.2 bar.3 bar.6.5 Pressure drop - bar low characteristics 4LG* /8 Inch ports Primary Pressure - bar 2.4 bar 6.2 bar.3 bar.6.5 Pressure drop - bar low characteristics. 4LG* /4 Inch ports L Mist Lubricator Kits & ccessories owl Kits Poly owl No rain... PS42P Specifications owl apacity... 3 cm 3 Minimum low for Lubrication....2 l/s at 6.9 bar Port Threads... /8, /4 Inch Pressure & Temperature Ratings Polycarbonate owl to.3 bar to 52 Weight... 8 gm Materials of onstruction ody... Zinc owls Transparent... Polycarbonate Seals... Nitrile Sight ome... Polycarbonate 3

14 P259TUK-ca Mounting racket Kits G J H K Typ. G J H K Typ. L M L M PS47P (Includes Panel Mount Nut) PS49 imensions (mm) G H J K L M Kit PS47P (, 4, 4R, 4) PS49 (4L) 4

15 P259TUK-ca 5

16 Pneumatic ivision Sales Offices ustria - Wr.Neustadt Tel: ax: elgium - Nivelles Tel: ax: zech & Slovak Republics - Klecany Tel: ax: enmark - allerup Tel: ax: inland - Vantaa Tel: ax: rance - ontamine Tel : ax : Germany - Kaarst Tel: ax: Greece - thens Tel: ax: Hungary - udapest Tel: ax: Ireland - ublin Tel: ax: Italy - orsico, Milan Tel: ax: Netherlands - Oldenzaal Tel: ax: Norway - Langhus Tel: ax: Poland - Warsaw Tel: ax: Portugal - Leça da Palmeira Tel: ax: Romania - ucharest Tel: ax: Russia - Moscow Tel: ax: Slovenia - Novo mesto Tel: ax: Spain - Madrid Tel: ax: Sweden - Spånga Tel: ax: Switzerland - olligen Tel.: ax: Turkey - Istanbul Tel: ax: UK - annock Tel: ax: Ukraine - Kiev Tel: ax: Parker Hannifin Ltd. Pneumatic ivision, Walkmill Lane, ridgtown, annock, Staffs. WS LR United Kingdom We reserve the right to make alterations without prior notification. opyright 27 ll rights reserved