Tri-Clover Bio-Pharm Fittings

Transcription

1 CTLOG PHRM-99 Tri-Clover Bio-Pharm Fittigs Complete Lie of SME-BPE-97 Compliat Fittigs

2 TRI-CLOVER FITTINGS FOR THE BIOPHRMCEUTICL INDUSTRIES chievig absolute cotrol through every step of the maufacturig process is essetial i order for the productio of saitary fittigs to be successful. By achievig such cotrol, each fittig will perform more satisfactorily whe icorporated ito the process istallatio, reducig istallatio time, ad esurig process itegrity. Tri-Clover offers the broadest rage of products ad iterior surface fiishes for the biopharmaceutical idustry. Iterior surface fiishes are available from a 10Ra electropolished to a 32Ra mechaically polished. ll of the products maufactured by Tri-Clover for the biopharmaceutical idustry are maufactured to the exactig stadards dictated by the idustry. I order to cosistetly maitai, or exceed these stadards, quality must be desiged ito the etire maufacturig process. Our maufacturig facilities are certified to coform to the iteratioally accepted quality maagemet system, ISO 9001, ad is desiged to set system quality requiremets ad esure that they are met. The documeted system is cotiuously moitored, through iteral ad exteral audits, to assure cotiuous improvemets ad adherece to the process. ssurace of quality starts with the selectio of raw materials. Our advaced maufacturig techiques eable us to meet or exceed the idustry s highest stadards of dimesioal tolerace ad surface fiish. 100% visual ispectio at every step alog the maufacturig process esures cosistecy of quality. Statistical aalyses applied to sophisticated stylus measuremet procedures assess compliace to outside diameter circularity. Udoubtedly, Tri-Clover fittigs are vital to the success of your processig system. Here are some further reasos why: Cotrolled Metallurgy The ISI 316L alloy used by Tri-Clover is specifically balaced for weldability, creatig excellet weldability i maufacturig ad durig istallatio. Sulfur cotrolled to % o all weld eds, allowig for cosistet ad high quality orbital weldig. ISI 316L specificatios permits up to 0.030% sulfur. The presece of sulfur has a egative impact o weld quality. Reliable batch-to-batch cosistecy leads to excellet cosistecy of orbital welds Tri-Clover Ic.

3 Traceability ll heat umbers are permaetly pi-stamped o each compoet of every fittig. ll biopharm fittigs are fully heat traced back to the origial stailess steel heat for weld documetatio/ validatio. Material Test Reports (MTR's) are delivered with the material upo request. MTR's are kept permaetly o file at Tri-Clover, ad ca be accessed by the heat umber o the part. Parts are also marked with the material desigatio (316L) ad the Tri-Clover logo to verify autheticity. Surface Fiish Mechaical polishig ad electropolishig available. I-house electropolishig capability allowig Tri-Clover to maitai cotrol of the quality at all times. I order to esure that the surface of the fittig is properly prepared ad i the proper coditio, tubular products are mechaically polished prior to the electropolishig operatio. Ra guarateed as maximum (ot average) which guaratees the surface fiish over the etire ID of the part. This exceeds BPE-97 requiremets. Mechaical polishig cosists of abrasive polishig, ot buffig. brasive polishig is much more effective tha buffig because it removes metal, creatig a ope ad cleaable surface. Buffig merely moves metal aroud, trappig iclusios, creatig sub-surface voids, ad maskig surface defects. Tri-Clover also does ot use buffig compouds, as they ca become embedded ito the surface of the part. Product Rage TRI-CLOVER FITTINGS FOR THE BIOPHRMCEUTICL INDUSTRIES Tri-Weld fittigs for orbital weldig. Tri-Clamp (clamp-ed) fittigs. Surface fiishes ragig from Ra 20µ-ich (0.5µm) mechaically polished dow to Ra 10µ-ich (0.25µm) electropolished. Tube OD sizes rage from ½" to 4" (12.7 to mm) as stadard. Larger sizes are available upo request. 3

4 TRI-CLOVER FITTINGS FOR THE BIOPHRMCEUTICL INDUSTRIES Markigs Each fittig is marked to show the followig: Heat umber o each compoet part of the fittig if more tha oe heat is used. Material type. Maufacturer s logo. SME BPE-97, if applicable. Iteral surface symbol usig the appropriate BPE specificatio. Note: I some istaces, due to the size of the compoet, the heat umber may be preseted i the form of a code. SME BPE 1997 I 1997, the merica Society of Mechaical Egieers published a stadard for fittigs to be used i the biopharmaceutical idustries (SME BPE-1997). These stadards defie pressure ratig, markig, materials, metal thickess, fittig dimesios, tests, toleraces, weldig eds, hygieic clamp eds, heat treatmet, surface coditio, ad packagig. y item that is govered by a specific stadard has the appropriate stadard ext to the product code (e.g. B2CMP is a 90 elbow with clamp ferrules at each ed ad is govered by stadard SME- BPE-97, DT-16). Where a stadard is refereced, that Tri-Clover product will meet or exceed that stadard. Dimesios ad Toleraces ll Tri-Weld fittigs have weld-eds to allow for orbital weldig. The squareess of the face-to-taget is carefully moitored to allow for orbital weldig without the use of tack-weldig. Wall thickess toleraces are set ad maitaied to comply with SME-BPE-97. fter formig, all tubular fittigs udergo a resizig operatio to esure dimesioal accuracy before facig ad fiishig operatios. The sizig techique employed varies accordig to the shape ad dimesio of the specific fittig. Heat Treatmet ll cold formed fittigs are heat treated to relieve stresses, ad to maitai toleraces over time. Heat treatmet elimiates the delta-ferrite i the welds, lesseig the risk of corrosio ad 4

5 TRI-CLOVER FITTINGS FOR THE BIOPHRMCEUTICL INDUSTRIES cotamiatio i the process. Packagig ll biopharm fittigs are ed-capped to protect the weld-ed or ferrule face from damage. ll biopharm fittigs are idividually heat-sealed i plastic bags to protect the O.D. from damage durig shippig ad to keep the fittigs clea ad dry. The bags are labeled with the part umber ad heat umbers to facilitate idetificatio of the part ad the fiish code. Saitary Fittigs I additio to our rage of fittigs for the biopharmaceutical idustry, we have the traditioal rage of 304 ad 316L stailess steel fittigs for saitary ad food idustry applicatios. This rage icludes both mechaically polished (32 Ra) ad upolished products i the Tri-Clamp, Tri-Weld ad Bevel Seat lies. L-6XN lloy May Tri-Clamp ad Tri-Weld fittigs are also available i L-6XN super austeitic alloy. These fittigs have a higher resistace to crevice corrosio, pittig ad/or stress corrosio crackig tha traditioal 316L compoets, thus lowerig overall system costs i difficult applicatios. (L-6XN is a registered trademark of lleghey Ludlum Corp.). Specialty Items Cotact Tri-Clover for pricig ad delivery iformatio for fittigs ot show i this catalog. Saitary fittigs idetified with this symbol o the followig pages are accepted as meetig the 3 saitary stadards by the appropriate committees of the Iteratioal ssociatio of Milk, Food ad Evirometal Saitarias, U.S. Public Health Service, ad Dairy Idustry Committee. NOTE: Catalog product presetatios icludig cataloged dimesios, desigs ad specificatios are represetative of product availability at time of publicatio oly. ctual geometry, dimesios, ad desigs are subject to desig ad maufacturig chages without otice. 5

6 Surface Fiishes Stadard Surface Fiishes ID or Product Cotact Surfaces Surface Fiish Code Maximum Surface Roughess* (Ra) Microiches (µ-ich) Micrometers (µm) Polishig Method OD or Product Nocotact Surface PC Mechaical Polished Upolished Bright ealed, Glass Bead** PD Mechaical Polished ad Electropolished Upolished Bright ealed PL Mechaical Polished Mechaical Polished to Ra, 32 µ-ich / 0.8 µm PM Mechaical Polished ad Electropolished Mechaical Polished to Ra, 32 µ-ich / 0.8 µm Special Surface Fiishes ID or Product Cotact Surfaces Surface Fiish Code Maximum Surface Roughess* (Ra) Microiches (µ-ich) Micrometers (µm) Polishig Method OD or Product Nocotact Surface PG Mechaical Polished Upolished Bright ealed PJ Mechaical Polished ad Electropolished Upolished Bright ealed PP Mechaical Polished Mechaical Polished to Ra, 32 µ-ich / 0.8 µm PR Mechaical Polished ad Electropolished Mechaical Polished to Ra, 32 µ-ich / 0.8 µm PU Upolished Bright ealed Upolished Bright ealed * To covert to R.M.S. fiish, multiply the R.. umber times 1.11 to get the approximate R.M.S. umber. ** The glass bead fiish applies oly to fractioal size fittigs (less tha 1, 25.4mm O.D.) for fiish codes: PC, PD, PG, PJ, ad PU. 6

7 ORDERING INFORMTION Tri-Weld fittigs ad Tri-Clamp fittigs are available i both fractioal (½" ad ¾", 12.7 ad 19.0 mm) sizes ad itegral (1" to 4", 25.4 to mm) sizes i type 316L Stailess Steel. These fittigs are available i a variety of ID ad OD surface fiishes, each idetified by a code. Surface fiish codes are show i the Surface Fiish Descriptios Table o page 6. Istructios for orderig are as follows: Specify complete part umber icludig: descriptio, size, material (316L) ad surface fiish descriptio, or use item code. See model umber example below Note: Whe orderig itegral fittigs, be sure to specify the complete part umber icludig: descriptio, size, material (316L) ad surface fiish descriptio. MODEL NUMBER EXMPLE B9MP L - PL 1 DESCRIPTION 2 SIZE ½" (12.7 mm) ¾" (19.0 mm) 1" (25.4 mm) 1½" (38.1 mm) 2" (50.8 mm) 2½" (63.5 mm) 3" (76.2 mm) 4" (101.6 mm) MTERIL 316L 4 SURFCE FINISH DESCRIPTION Refer to Surface Fiish Descriptio Tables o Page 6 7

8 TRI-CLMP Elbows B2CMP - 90 Elbow* i mm i mm ½ ⁵ ₈ 41.3 ¾ ⁵ ₈ ½ ³ ₄ ¹ ₂ ½ ¹ ₄ ⁵ ₈ *Complies to BPE stadard DT-16 B2KMP - 45 Elbow* i mm i mm ¹ ₂ ³ ₄ ¹ ₈ ¹ ₂ ⁷ ₁₆ ³ ₄ ¹ ₂ ¹ ₁₆ ³ ₈ ¹ ₈ 79.3 *Complies to BPE stadard DT-17 8

9 TRI-CLMP Tees B7MP - Tee* B i mm i mm i mm ¹ ₂ ¹ ₂ ¹ ₄ 57.2 ³ ₄ ³ ₄ ³ ₈ ¹ ₄ ⁵ ₈ ¹ ₂ ³ ₄ ⁷ ₈ ³ ₄ ³ ₈ ¹ ₂ ¹ ₄ ⁵ ₈ ³ ₄ ⁷ ₈ ¹ ₂ ³ ₄ *Complies to BPE stadard DT-18 7MPS - Short Outlet Tee B C i mm i mm i mm i mm ½ ¹ ₄ ⁵ ₈ ¾ ⁹ ₃₂ ⁴¹ ₆₄ ¹ ₈ ³ ₄ ³ ₈ ¹ ₁₆ ½ ¹ ₂ ³ ₄ ³ ₈ ¹ ₂ ⁵ ₈ ½ ¹ ₂ ⁷ ₈ ¹ ₂ ³ ₄ ¹ ₈ ¹ ₂ ³ ₄

10 TRI-CLMP Reducig Tee B7RMP - Reducig Tee* B C i mm i mm i mm i mm ¾ x ½ 19.0 x ¹ ₂ ¹ ₂ x ½ 25.4 x ¹ ₄ ⁵ ₈ ⁵ ₈ x ¾ 25.4 x ¹ ₄ ⁵ ₈ ⁵ ₈ ½ x ½ 38.1 x ³ ₄ ⁷ ₈ ⁷ ₈ ½ x ¾ 38.1 x ³ ₄ ⁷ ₈ ⁷ ₈ ½ x x ³ ₄ ⁷ ₈ ⁷ ₈ x ½ 50.8 x ³ ₄ ³ ₈ ¹ ₈ x ¾ 50.8 x ³ ₄ ³ ₈ ¹ ₈ x x ³ ₄ ³ ₈ ¹ ₈ x 1½ 50.8 x ³ ₄ ³ ₈ ¹ ₈ ½ x ½ 63.5 x ¹ ₄ ⁵ ₈ ³ ₈ ½ x ¾ 63.5 x ¹ ₄ ⁵ ₈ ³ ₈ ½ x x ¹ ₄ ⁵ ₈ ³ ₈ ½ x 1½ 63.5 x ¹ ₄ ⁵ ₈ ³ ₈ ½ x x ¹ ₄ ⁵ ₈ ³ ₈ x ½ 76.2 x ³ ₄ ⁷ ₈ ⁵ ₈ x ¾ 76.2 x ³ ₄ ⁷ ₈ ⁵ ₈ x x ³ ₄ ⁷ ₈ ⁵ ₈ x 1½ 76.2 x ³ ₄ ⁷ ₈ ⁵ ₈ x x ³ ₄ ⁷ ₈ ⁷ ₈ x 2½ 76.2 x ³ ₄ ⁷ ₈ ⁷ ₈ x ½ x ¹ ₂ ³ ₄ ¹ ₈ x ¾ x ¹ ₂ ³ ₄ ¹ ₈ x x ¹ ₂ ³ ₄ ¹ ₈ x 1½ x ¹ ₂ ³ ₄ ¹ ₈ x x ¹ ₂ ³ ₄ ³ ₈ x 2½ x ¹ ₂ ³ ₄ ³ ₈ x x ¹ ₂ ³ ₄ ³ ₈ *Complies to BPE stadard DT-19 10

11 TRI-CLMP Short Outlet Reducig Tee B7RMPS - Short Outlet Reducig Tee* B C i mm i mm i mm i mm ¾ x ½ 19.0 x ¹ ₂ x ½ 25.4 x ¹ ₄ ⁵ ₈ ¹ ₈ x ¾ 25.4 x ¹ ₄ ⁵ ₈ ¹ ₈ ½ x ½ 38.1 x ³ ₄ ⁷ ₈ ³ ₈ ½ x ¾ 38.1 x ³ ₄ ⁷ ₈ ³ ₈ ½ x x ³ ₄ ⁷ ₈ ³ ₈ x ½ 50.8 x ³ ₄ ³ ₈ ⁵ ₈ x ¾ 50.8 x ³ ₄ ³ ₈ ⁵ ₈ x x ³ ₄ ³ ₈ ⁵ ₈ x 1½ 50.8 x ³ ₄ ³ ₈ ⁵ ₈ ½ x ½ 63.5 x ¹ ₄ ⁵ ₈ ⁷ ₈ ½ x ¾ 63.5 x ¹ ₄ ⁵ ₈ ⁷ ₈ ½ x x ¹ ₄ ⁵ ₈ ⁷ ₈ ½ x 1½ 63.5 x ¹ ₄ ⁵ ₈ ⁷ ₈ ½ x x ¹ ₄ ⁵ ₈ ⁷ ₈ x ½ 76.2 x ³ ₄ ⁷ ₈ ¹ ₈ x ¾ 76.2 x ³ ₄ ⁷ ₈ ¹ ₈ x x ³ ₄ ⁷ ₈ ¹ ₈ x 1½ 76.2 x ³ ₄ ⁷ ₈ ¹ ₈ x x ³ ₄ ⁷ ₈ ¹ ₈ x 2½ 76.2 x ³ ₄ ⁷ ₈ ¹ ₈ x ½ x ¹ ₂ ³ ₄ ⁵ ₈ x ¾ x ¹ ₂ ³ ₄ ⁵ ₈ x x ¹ ₂ ³ ₄ ⁵ ₈ x 1½ x ¹ ₂ ³ ₄ ⁵ ₈ x x ¹ ₂ ³ ₄ ⁵ ₈ x 2½ x ¹ ₂ ³ ₄ ⁵ ₈ x x ¹ ₂ ³ ₄ ⁵ ₈ 66.7 *Complies to BPE stadard DT-20 11

12 TRI-CLMP Tee & Cross 7IMPS - Istrumet Tee B C i mm i mm i mm i mm ½ x 1½ 12.7 x ⁷ ₈ 22.2 ½ x x ¹ ₂ ¹ ₄ ¾ x 1½ 19.0 x ¾ x x ¹ ₂ ¹ ₄ ¹ ₈ x 1½ 25.4 x ¹ ₈ x x ¹ ₂ ¹ ₄ ¹ ₄ ½ x x ¹ ₂ ¹ ₄ ¹ ₂ 38.1 Fiish Optios: PL, PM B9MP - Cross* B i mm i mm i mm ¹ ₂ ¹ ₂ ¹ ₄ 57.2 ³ ₄ ³ ₄ ³ ₈ ¹ ₄ ⁵ ₈ ¹ ₂ ³ ₄ ⁷ ₈ ³ ₄ ³ ₈ ¹ ₂ ¹ ₄ ⁵ ₈ ³ ₄ ⁷ ₈ ¹ ₂ ³ ₄ *Complies to BPE stadard DT-18B 12

13 TRI-CLMP Cocetric Reducer B31-14MP - Cocetric Reducer* i mm i mm ¾ x ½ 19.0 x x ½ 25.4 x ¹ ₂ x ¾ 25.4 x ½ x ½ 38.1 x ¹ ₂ ½ x ¾ 38.1 x ½ x x x ¾ 50.8 x x x x 1½ 50.8 x ½ x 1½ 63.5 x ½ x x x 1½ 76.2 x x x x 2½ 76.2 x x x ¹ ₈ x 2½ x ¹ ₈ x x ¹ ₈ *Complies to BPE stadard DT-21 13

14 TRI-CLMP Eccetric Reducer B32-14MP - Eccetric Reducer* i mm i mm ¾ x ½ 19.0 x x ½ 25.4 x ¹ ₂ x ¾ 25.4 x ½ x ½ 38.1 x ¹ ₂ ½ x ¾ 38.1 x ½ x x x ¾ 50.8 x x x x 1½ 50.8 x ½ x 1½ 63.5 x ½ x x x 1½ 76.2 x x x x 2½ 76.2 x x x ¹ ₈ x 2½ x ¹ ₈ x x ¹ ₈ *Complies to BPE stadard DT-21 14

15 TRI-WELD Tube Beds B2S - 90 Tube Bed* i mm i mm ½ ¾ ½ ³ ₄ ³ ₄ ½ ¹ ₂ ¹ ₄ *Complies to BPE stadard DT-7 B2CMW - 90 Tube Bed, Tri-Clamp* B i mm i mm i mm ½ ⁵ ₈ 41.3 ¾ ⁵ ₈ ½ ³ ₄ ³ ₄ ³ ₄ ¹ ₂ ½ ¹ ₂ ¹ ₄ ¹ ₄ ⁵ ₈ *Complies to BPE stadard DT-12 15

16 TRI-WELD Tube Beds B2KS - 45 Tube Bed* i mm i mm ½ ¹ ₄ 57.2 ¾ ¹ ₄ ¹ ₄ ½ ¹ ₂ ½ ³ ₈ ⁵ ₈ ¹ ₂ *Complies to BPE stadard DT-8 B2KMW - 45 Tube Bed, Tri-Clamp Oe Ed* B i mm i mm i mm ½ ¹ ₄ ¾ ¹ ₄ ¹ ₄ ¹ ₈ ½ ¹ ₂ ⁷ ₁₆ ³ ₄ ½ ³ ₈ ¹ ₁₆ ⁵ ₈ ³ ₈ ¹ ₂ ¹ ₈ 79.4 *Complies to BPE stadard DT-13 16

17 TRI-WELD Tees B7WWW - Tee* B C i mm i mm i mm i mm ½ ³ ₄ ⁷ ₈ ⁷ ₈ 47.6 ¾ ¹ ₄ ¹ ₈ ¹ ₈ ½ ³ ₄ ³ ₈ ³ ₈ ³ ₄ ⁷ ₈ ⁷ ₈ ½ ¹ ₄ ¹ ₈ ¹ ₈ ³ ₄ ³ ₈ ³ ₈ ¹ ₄ ¹ ₈ ¹ ₈ *Complies to BPE stadard DT-9 B7WWMS - Short Outlet Tee (Tri-Clamp o Short Ed)* B C i mm i mm i mm i mm ½ ³ ₄ ⁷ ₈ ¾ ¹ ₈ ¹ ₄ ¹ ₈ ¹ ₈ ½ ³ ₄ ³ ₈ ³ ₈ ³ ₄ ⁷ ₈ ⁵ ₈ ½ ¹ ₄ ¹ ₈ ⁷ ₈ ³ ₄ ³ ₈ ¹ ₈ ¹ ₄ ¹ ₈ ³ ₄ 69.9 *Complies to BPE stadard DT-15 17

18 TRI-WELD Reducig Tee B7RWWW - Reducig Tee* B C i mm i mm i mm i mm ¾ x ½ 19.0 x x ½ 25.4 x ¹ ₄ ¹ ₈ ¹ ₈ x ¾ 25.4 x ¹ ₄ ¹ ₈ ¹ ₈ ½ x ½ 38.1 x ³ ₄ ³ ₈ ³ ₈ ½ x ¾ 38.1 x ³ ₄ ³ ₈ ³ ₈ ½ x x ³ ₄ ³ ₈ ³ ₈ x ½ 50.8 x ³ ₄ ⁷ ₈ ⁵ ₈ x ¾ 50.8 x ³ ₄ ⁷ ₈ ⁵ ₈ x x ³ ₄ ⁷ ₈ ⁵ ₈ x 1½ 50.8 x ³ ₄ ⁷ ₈ ⁵ ₈ ½ x ½ 63.5 x ¹ ₄ ¹ ₈ ⁷ ₈ ½ x ¾ 63.5 x ¹ ₄ ¹ ₈ ⁷ ₈ ½ x x ¹ ₄ ¹ ₈ ⁷ ₈ ½ x 1½ 63.5 x ¹ ₄ ¹ ₈ ⁷ ₈ ½ x x ¹ ₄ ¹ ₈ ⁷ ₈ x ½ 76.2 x ³ ₄ ³ ₈ ¹ ₈ x ¾ 76.2 x ³ ₄ ³ ₈ ¹ ₈ x x ³ ₄ ³ ₈ ¹ ₈ x 1½ 76.2 x ³ ₄ ³ ₈ ¹ ₈ x x ³ ₄ ³ ₈ ¹ ₈ x 2½ 76.2 x ³ ₄ ³ ₈ ¹ ₈ x ½ x ¹ ₄ ¹ ₈ ⁵ ₈ x ¾ x ¹ ₄ ¹ ₈ ⁵ ₈ x x ¹ ₄ ¹ ₈ ⁵ ₈ x 1½ x ¹ ₄ ¹ ₈ ⁵ ₈ x x ¹ ₄ ¹ ₈ ⁷ ₈ x 2½ x ¹ ₄ ¹ ₈ ⁷ ₈ x x ¹ ₄ ¹ ₈ ⁷ ₈ 98.4 *Complies to BPE stadard DT-10 18

19 TRI-WELD Short Outlet Reducig Tee B7RWWMS - Short Outlet Reducig Tee* B C i mm i mm i mm i mm ¾ x ½ 19.0 x x ½ 25.4 x ¹ ₄ ¹ ₈ ¹ ₈ x ¾ 25.4 x ¹ ₄ ¹ ₈ ¹ ₈ ½ x ½ 38.1 x ³ ₄ ³ ₈ ³ ₈ ½ x ¾ 38.1 x ³ ₄ ³ ₈ ³ ₈ ½ x x ³ ₄ ³ ₈ ³ ₈ x ½ 50.8 x ³ ₄ ⁷ ₈ ⁵ ₈ x ¾ 50.8 x ³ ₄ ⁷ ₈ ⁵ ₈ x x ³ ₄ ⁷ ₈ ⁵ ₈ x 1½ 50.8 x ³ ₄ ⁷ ₈ ⁵ ₈ ½ x ½ 63.5 x ¹ ₄ ¹ ₈ ⁷ ₈ ½ x ¾ 63.5 x ¹ ₄ ¹ ₈ ⁷ ₈ ½ x x ¹ ₄ ¹ ₈ ⁷ ₈ ½ x 1½ 63.5 x ¹ ₄ ¹ ₈ ⁷ ₈ ½ x x ¹ ₄ ¹ ₈ ⁷ ₈ x ½ 76.2 x ³ ₄ ³ ₈ ¹ ₈ x ¾ 76.2 x ³ ₄ ³ ₈ ¹ ₈ x x ³ ₄ ³ ₈ ¹ ₈ x 1½ 76.2 x ³ ₄ ³ ₈ ¹ ₈ x x ³ ₄ ³ ₈ ¹ ₈ x 2½ 76.2 x ³ ₄ ³ ₈ ¹ ₈ x ½ x ¹ ₄ ¹ ₈ ⁵ ₈ x ¾ x ¹ ₄ ¹ ₈ ⁵ ₈ x x ¹ ₄ ¹ ₈ ⁵ ₈ x 1½ x ¹ ₄ ¹ ₈ ⁵ ₈ x x ¹ ₄ ¹ ₈ ⁵ ₈ x 2½ x ¹ ₄ ¹ ₈ ⁵ ₈ x x ¹ ₄ ¹ ₈ ⁵ ₈ 66.7 *Complies to BPE stadard DT-14 19

20 TRI-WELD Reducig Tee B7RWWM - Reducig Tee B C i mm i mm i mm i mm ¾ x ½ 19.0 x ¹ ₂ x ½ 25.4 x ¹ ₄ ¹ ₈ ⁵ ₈ x ¾ 25.4 x ¹ ₄ ¹ ₈ ⁵ ₈ ½ x ½ 38.1 x ³ ₄ ³ ₈ ⁷ ₈ ½ x ¾ 38.1 x ³ ₄ ³ ₈ ⁷ ₈ ½ x x ³ ₄ ³ ₈ ⁷ ₈ x ½ 50.8 x ³ ₄ ⁷ ₈ ¹ ₈ x ¾ 50.8 x ³ ₄ ⁷ ₈ ¹ ₈ x x ³ ₄ ⁷ ₈ ¹ ₈ x 1½ 50.8 x ³ ₄ ⁷ ₈ ¹ ₈ ½ x x ¹ ₄ ¹ ₈ ³ ₈ ½ x 1½ 63.5 x ¹ ₄ ¹ ₈ ³ ₈ ½ x x ¹ ₄ ¹ ₈ ³ ₈ x x ³ ₄ ³ ₈ ⁵ ₈ x 1½ 76.2 x ³ ₄ ³ ₈ ⁵ ₈ x x ³ ₄ ³ ₈ ⁵ ₈ x 2½ 76.2 x ³ ₄ ³ ₈ ⁵ ₈ x x ¹ ₄ ¹ ₈ ¹ ₈ x 1½ x ¹ ₄ ¹ ₈ ¹ ₈ x x ¹ ₄ ¹ ₈ ³ ₈ x 2½ x ¹ ₄ ¹ ₈ ³ ₈ x x ¹ ₄ ¹ ₈ ³ ₈

21 TRI-WELD Tees B7WWM - Tee B C i mm i mm i mm i mm ½ ³ ₄ ⁷ ₈ ³ ₈ 60.3 ¾ ¹ ₂ ¹ ₄ ¹ ₈ ⁵ ₈ ½ ³ ₄ ³ ₈ ⁷ ₈ ³ ₄ ⁷ ₈ ³ ₈ ½ ¹ ₄ ¹ ₈ ⁵ ₈ ³ ₄ ³ ₈ ⁷ ₈ ¹ ₄ ¹ ₈ ³ ₄ TL7IWWMS - Istrumet Tee B C i mm i mm i mm i mm ½ x 1½ 12.7 x ¹ ₂ 63.5 ⁷ ₈ 22.2 ½ x x ¹ ₂ ³ ₄ ¾ x 1½ 19.0 x ¹ ₂ ¾ x x ¹ ₂ ³ ₄ ¹ ₈ x 1½ 25.4 x ¹ ₂ ¹ ₈ x x ¹ ₂ ³ ₄ ¹ ₄ ½ x x ¹ ₂ ³ ₄ ¹ ₂

22 TRI-WELD Tee & Cross B7WMSW - Short Outlet Ru Tee* B C i mm i mm i mm i mm ¹ ₂ 12.7 ⁷ ₈ ⁷ ₈ ⁷ ₈ 47.6 ³ ₄ ¹ ₈ ¹ ₈ ¹ ₈ ¹ ₂ ³ ₈ ³ ₈ ³ ₈ ⁵ ₈ ⁷ ₈ ⁷ ₈ ¹ ₂ ⁷ ₈ ¹ ₈ ¹ ₈ ¹ ₈ ³ ₈ ³ ₈ ³ ₄ ¹ ₈ ¹ ₈ *Complies to BPE stadard DT-25 B9WWWW - Cross* B i mm i mm i mm ½ ³ ₄ ⁷ ₈ 47.6 ¾ ¹ ₄ ¹ ₈ ½ ³ ₄ ³ ₈ ³ ₄ ⁷ ₈ ½ ¹ ₄ ¹ ₈ ³ ₄ ³ ₈ ¹ ₄ ¹ ₈ *Complies to BPE stadard DT-9B 22

23 TRI-WELD Reducig Cross B9RWWWW - Reducig Cross B C D i mm i mm i mm i mm i mm ¾ x ½ 19.0 x x ½ 25.4 x ¹ ₄ ¹ ₈ ¹ ₄ ¹ ₈ x ¾ 25.4 x ¹ ₄ ¹ ₈ ¹ ₄ ¹ ₈ ½ x ½ 38.1 x ³ ₄ ³ ₈ ³ ₄ ³ ₈ ½ x ¾ 38.1 x ³ ₄ ³ ₈ ³ ₄ ³ ₈ ½ x x ³ ₄ ³ ₈ ³ ₄ ³ ₈ x ½ 50.8 x ³ ₄ ⁷ ₈ ¹ ₄ ⁵ ₈ x ¾ 50.8 x ³ ₄ ⁷ ₈ ¹ ₄ ⁵ ₈ x x ³ ₄ ⁷ ₈ ¹ ₄ ⁵ ₈ x 1½ 50.8 x ³ ₄ ⁷ ₈ ¹ ₄ ⁵ ₈ ½ x x ¹ ₄ ¹ ₈ ³ ₄ ⁷ ₈ ½ x 1½ 63.5 x ¹ ₄ ¹ ₈ ³ ₄ ⁷ ₈ ½ x x ¹ ₄ ¹ ₈ ³ ₄ ⁷ ₈ x x ³ ₄ ³ ₈ ¹ ₄ ¹ ₈ x 1½ 76.2 x ³ ₄ ³ ₈ ¹ ₄ ¹ ₈ x x ³ ₄ ³ ₈ ¹ ₄ ¹ ₈ x 2½ 76.2 x ³ ₄ ³ ₈ ¹ ₄ ¹ ₈ x x ¹ ₄ ¹ ₈ ¹ ₄ ⁵ ₈ x 1½ x ¹ ₄ ¹ ₈ ¹ ₄ ⁵ ₈ x x ¹ ₄ ¹ ₈ ³ ₄ ⁷ ₈ x 2½ x ¹ ₄ ¹ ₈ ³ ₄ ⁷ ₈ x x ¹ ₄ ¹ ₈ ³ ₄ ⁷ ₈

24 TRI-WELD Ferrules BS14M - Tri-Weld Ferrule* i mm i mm ½ ³ ₄ 44.5 ¾ ³ ₄ ³ ₄ ½ ³ ₄ ¹ ₄ ½ ¹ ₄ ¹ ₄ ¹ ₄ 57.2 *Complies to BPE stadard DT-22 Fiish Optios: PL, PM 14WMPS - Short Ferrule i mm i mm ½ 12.7 ¹ ₂ 12.7 ¾ 19.0 ¹ ₂ ¹ ₂ ½ 38.1 ¹ ₂ ¹ ₂ ½ 63.5 ¹ ₂ ¹ ₂ ⁵ ₈ 15.9 Fiish Optios: PL, PM 24

25 TRI-WELD Ed & Cap TL14VB - Stub Ed i mm i mm ½ ¾ ½ ¹ ₂ ½ ¹ ₂ ¹ ₂ ¹ ₂ 63.5 TL16W - Exteded Taget Cap i mm i mm ½ ¹³ ₁₆ 46.0 ¾ 19 1¹³ ₁₆ ⁷ ₈ ½ ¹ ₁₆ ³ ₄ ½ ¹ ₄

26 TRI-WELD dapter 21MP - Male dapter (N.P.T. pipe threads) No 3 i mm i mm ¹ ₂ x ¹ ₈ ¹ ₂ x ¹ ₄ ¹ ₂ x ³ ₈ ¹ ₂ x ¹ ₂ ¹ ₂ x ³ ₄ ³ ₄ x ¹ ₈ ³ ₄ x ¹ ₄ ³ ₄ x ³ ₈ ³ ₄ x ¹ ₂ ³ ₄ x ³ ₄ 12.7 x x x x x x x x x x ¹ ₄ ½ ⁷ ₁₆ ²¹ ₃₂ ½ ⁹ ₃₂ ¹ ₂ ¹³ ₁₆ 96.8 Fiish Optios: PL, PM Note: Whe adapter dimesios are give, the saitary style ed is always idicated first. ppearace may vary accordig to size. 26

27 TRI-WELD dapter 22MP - Female dapter (N.P.T. pipe threads) No 3 i mm i mm ¹ ₂ x ¹ ₈ ¹ ₂ x ¹ ₄ ¹ ₂ x ³ ₈ ¹ ₂ x ¹ ₂ ¹ ₂ x ³ ₄ ³ ₄ x ¹ ₈ ³ ₄ x ¹ ₄ ³ ₄ x ³ ₈ ³ ₄ x ¹ ₂ ³ ₄ x ³ ₄ 12.7 x 3.2 1¹ ₄ x 6.4 1¹ ₂ x 9.5 1¹ ₂ x ¹ ₂ x ⁵ ₈ x 3.2 1¹ ₄ x 6.4 1¹ ₂ x 9.5 1¹ ₂ x ¹ ₂ x ⁵ ₈ ⁵ ₈ ½ ¹ ₄ ¹¹ ₃₂ ½ ¹ ₄ ³ ₁₆ ⁵ ₈ 66.7 Fiish Optios: PL, PM Note: Whe adapter dimesios are give, the saitary style ed is always idicated first. ppearace may vary accordig to size. 27

28 TRI-WELD Ed Cap & dapter 16 MP - Solid Ed Cap B i mm i mm i mm ½ & ¾ 12.7 & 19.0 ³ ₁₆ 4.8 ⁶³ ₆₄ & 1½ 25.4 & 38.1 ¹ ₄ 6.4 1⁶³ ₆₄ ¹ ₄ 6.4 2³³ ₆₄ ½ 63.5 ¹ ₄ 6.4 3³ ₆₄ ¹ ₄ 6.4 3³⁷ ₆₄ ¹ ₄ 6.4 4¹¹ ₁₆ Fiish Optios: PL, PM Note: ¾" 16 MP used o both ½ ad ¾ lies. 1½ 16 MP used o both 1 ad 1½ lies. 14MPHR - Rubber Hose dapter i mm i mm ½ x ½ 12.7 x ¹ ₂ 38.1 ¾ x ¾ 19.0 x ¹ ₂ ¹¹ ₁₆ ½ ¹¹ ₁₆ ⁵ ₁₆ ½ ⁷ ₆₄ ¹³ ₃₂ 86.5 Fiish Optios: PL, PM 28

29 TRI-WELD Reducer B31 - Cocetric Reducer* i mm i mm ¾ x ½ 19.0 x x ½ 25.4 x ¹ ₂ x ¾ 25.4 x ½ x ½ 38.1 x ¹ ₂ ½ x ¾ 38.1 x ½ x x x ¾ 50.8 x ¹ ₄ x x ¹ ₄ x 1½ 50.8 x ¹ ₄ ½ x 1½ 63.5 x ¹ ₄ ½ x x ¹ ₂ x 1½ 76.2 x ¹ ₄ x x ¹ ₂ x 2½ 76.2 x ¹ ₂ x x ³ ₄ x 2½ x ³ ₄ x x ³ ₄ *Complies to BPE stadard DT-11B 29

30 TRI-WELD Reducer B32 - Eccetric Reducer* i mm i mm ¾ x ½ 19.0 x x ½ 25.4 x ¹ ₂ x ¾ 25.4 x ½ x ½ 38.1 x ¹ ₂ ½ x ¾ 38.1 x ½ x x x x ¹ ₄ x 1½ 50.8 x ¹ ₄ ½ x 1½ 63.5 x ¹ ₄ ½ x x ¹ ₂ x 1½ 76.2 x ¹ ₄ x x ¹ ₂ x 2½ 76.2 x ¹ ₂ x x ³ ₄ x 2½ x ³ ₄ x x ³ ₄ *Complies to BPE stadard DT-11 30

31 TRI-WELD Reducer B31M - Cocetric Reducer (Tri-Clamp o Big Ed)* i mm i mm ¾ x ½ 19.0 x x ½ 25.4 x ¹ ₂ x ¾ 25.4 x ½ x ½ 38.1 x ¹ ₂ ½ x ¾ 38.1 x ½ x x x x x 1½ 50.8 x ½ x 1½ 63.5 x ½ x x ¹ ₄ x 1½ 76.2 x x x ¹ ₄ x 2½ 76.2 x ¹ ₄ x x ³ ₈ x 2½ x ³ ₈ x x ³ ₈ *Complies to BPE stadard DT-26 31

32 TRI-WELD Reducer B32M - Eccetric Reducer (Tri-Clamp o Big Ed)* i mm i mm ¾ x ½ 19.0 x x ½ 25.4 x ¹ ₂ x ¾ 25.4 x ½ x ½ 38.1 x ¹ ₂ ½ x ¾ 38.1 x ½ x x x x x 1½ 50.8 x ½ x 1½ 63.5 x ½ x x ¹ ₄ x 1½ 76.2 x x x ¹ ₄ x 2½ 76.2 x ¹ ₄ x x ³ ₈ x 2½ x ³ ₈ x x ³ ₈ *Complies to BPE stadard DT-26 32

33 TRI-WELD Use-Poit B2UMPBO - Use-Poit* B C i mm i mm i mm i mm 1 x ½ 25.4 x ³ ₄ ¹ ₂ x ¾ 25.4 x ³ ₄ ¹ ₂ ½ x ½ 38.1 x ¹ ₂ ½ x ¾ 38.1 x ¹ ₂ ½ x x ¹ ₂ ¹ ₈ x ½ 50.8 x ³ ₄ x ¾ 50.8 x ³ ₄ x x x 1½ 50.8 x ³ ₄ ½ x ½ 63.5 x ³ ₄ ¹ ₂ ³ ₄ ½ x ¾ 63.5 x ³ ₄ ¹ ₂ ³ ₄ ½ x x ³ ₄ ¹ ₂ ¹⁵ ₁₆ ½ x 1½ 63.5 x ³ ₄ ¹ ₂ ³ ₄ ½ x x ³ ₄ ¹ ₂ ¹ ₈ x ½ 76.2 x ¹ ₂ ³ ₄ x ¾ 76.2 x ¹ ₂ ³ ₄ x x ¹ ₂ x 1½ 76.2 x ¹ ₂ ¹³ ₁₆ x x ¹ ₂ ³ ₄ x 2½ 76.2 x ¹ ₂ ¹ ₈ x ½ x ¹ ₂ ¹ ₄ x ¾ x ¹ ₂ ¹ ₄ x x ¹ ₂ ⁹ ₁₆ x 1½ x ¹ ₂ ⁷ ₁₆ x x ¹ ₂ ¹ ₄ x 2½ x ¹ ₂ ⁵ ₈ x x ¹ ₂ ⁵ ₈ *Complies to BPE stadard DT-23 33

34 TRI-WELD Use-Poit B2UMPSO - Use-Poit* B C D i mm i mm i mm i mm i mm 1 x ¾ 25.4 x ³ ₄ ¹ ₂ ⁷ ₈ ¹ ₄ ½ x ¾ 38.1 x ¹ ₂ ⁷ ₈ ³ ₄ ½ x x ¹ ₂ ³ ₄ ³ ₄ x ¾ 50.8 x ⁵ ₈ ³ ₄ x x ¹ ₂ ³ ₄ x 1½ 50.8 x ¹ ₄ ³ ₄ ½ x x ³ ₄ ¹ ₂ ¹ ₂ ³ ₄ ½ x 1½ 63.5 x ³ ₄ ¹ ₂ ¹ ₄ ³ ₄ ½ x x ³ ₄ ¹ ₂ ¹ ₄ x x ¹ ₂ ¹ ₂ ¹ ₄ x 1½ 76.2 x ¹ ₂ ¹ ₄ ¹ ₄ x x ¹ ₂ ¹ ₄ x 2½ 76.2 x ¹ ₂ ³ ₄ ¹ ₄ x x ¹ ₂ x 1½ x ¹ ₂ ³ ₄ ¹ ₂ x x ¹ ₂ ¹ ₂ x 2½ x ¹ ₂ ¹ ₄ ¹ ₂ x x ¹ ₂ *Complies to BPE stadard DT-23 34

35 Tri-Clamps 13MHL - Higed Tri-Clamp, djustable i mm i mm ⁹ ₆₄ ¹ ₂ ⁹ ₆₄ ³⁹ ₆₄ ¹ ₂ ⁹ ₆₄ ⁴³ ₆₄ ²⁵ ₃₂ MHL 1" to 4" (25.4 to mm) Tube OD. Simple toggle actio clamp for istallatios requirig frequet quick opeig ad closig. djustmet screw compesates for gasket yield. 13MHHM - Higed Tri-Clamp, Heavy Duty with Metal Wig Nut i mm i mm ¹ ₈ ¹ ₂ ¹ ₈ ²¹ ₃₂ ¹ ₂ ³ ₁₆ ²³ ₃₂ ⁵³ ₆₄ MHHM 1" to 8" (25.4 to mm) Tube OD. Heavy costructio provides protectio agaist leakage or misaligmet. Held i positio by had tighteed wig ut. NOTE: 1" (25.4 mm) fittigs take 1½" (38.1 mm) clamp assemblies. Material-Type 304SS. 35

36 Tri-Clamps 13MHHS - Higed Tri-Clamp, 3 Piece Heavy Duty with Metal Wig Nut i mm i mm ¹ ₈ ¹ ₂ ¹ ₈ ²¹ ₃₂ ¹ ₂ ³ ₁₆ ²³ ₃₂ ⁵³ ₆₄ MHHS 1" to 4" (25.4 to mm) Tube OD. Pateted heavy duty, 3-segmet desig has stop higes to promote easy, fast aligmet ad speedy istallatio. US Patet Number 4,568,115 13MHHS-¾-S, Higed Tri-Clamp, 2 Piece Heavy Duty with Metal Wig Nut i mm i mm ³ ₄ ¹ ₈ MHHS-¾-S Heavy costructio provides secure aligmet. Oe size accommodates ½" ad ¾" (12.7 ad 19.0 mm) fittigs. NOTE: 1" (25.4 mm) fittigs take 1½" (38.1 mm) clamp assemblies. Material-Type 304SS. 36

37 Tri-Clamps 13MO(1) - Pressure Tri-Clamp, djustable with Captive Nut i mm i mm ⁵ ₆₄ ¹ ₂ ⁵ ₆₄ ³⁹ ₆₄ ¹ ₂ ⁹ ₆₄ ⁴³ ₆₄ ²⁵ ₃₂ MO 1" to 6" (25.4 to mm) Tube OD. Lightweight stailess steel clamp offers quick positive couplig actio. Tee bolt locks ito latch. 13MHP - High Pressure Clamp i mm i mm ³ ₆₄ ¹ ₂ ³ ₆₄ ³⁷ ₆₄ ¹ ₂ ⁷ ₆₄ ⁴¹ ₆₄ ⁴⁷ ₆₄ MHP 1½" to 6" (38.1 to mm) Tube OD. Twopiece high pressure/high temperature clamp uses stailess steel bolts ad heavy cast costructio. NOTE: 1" (25.4 mm) fittigs take 1½" (38.1 mm) clamp assemblies. Material-Type 304SS. 37

38 Tri-Clamps 13MHM - Clamp ssembly i mm i mm ¹ ₈ ¹ ₂ ¹ ₈ ⁴¹ ₆₄ ¹ ₂ ³ ₁₆ ²³ ₃₂ MHM NOTE: ½ (12.7mm) fittigs take ¾ (19.0mm) clamp assemblies, material type 304 SS. 1 (25.4mm) fittigs take 1½ (38.1mm) clamp assemblies, material type 304 SS ¹³ ₁₆ 96.8 PSI Service Ratigs* Tube OD ½ i ¾ i 1 i 1½ i 2 i 2½ i 3 i 4 i 13MHL (Screw tighteed to 70 F F MHHM (Wig ut tighteed to 25 i. lb. of 70 F F MHHS (Wig ut tighteed to 25 i. lb. of 70 F F MHP (For use with 1" fittigs. Bolts tighteed to 20 ft. lb. of 70 F F MO (1-3" uts tighteed to 20 i. lb., 4" to 30 i. 70 F F MHM (Wig ut tighteed to 25 i. lb. of 70 F F *Service ratigs are based o hydrostatic tests usig stadard-molded Bua-N material gaskets (see type 1 gaskets), with proper istallatio of ferrules, assembly of joits ad absece of shock pressure. Cotact Tri-Clover for service of other type ad material gaskets, ad for ratigs at higher temperatures. ll ratigs show are depedet upo related compoets withi the systems ad proper istallatio. For temperatures above 250 F, we recommed usig oly #13MHP clamps. This iformatio is oly valid if Tri-Clover clamps, ferrules, ad gaskets are used. 38

39 Tri-Clamps Bar Service Ratigs* Tube OD 12.7 mm 19.0 mm 25.4 mm 38.1 mm 50.8 mm 63.5 mm 76.2 mm mm 13MHL (Screw tighteed to 21 C C MHHM (Wig ut tighteed to 2.8 Nm of 21 C C MHHS (Wig ut tighteed to 2.8 Nm of 21 C C MHP (For use with 25.4 mm fittigs. Bolts tighteed to 27.1 Nm of 21 C C MO ( mm uts tighteed to 2.3 Nm, mm to C C MHM (Wig ut tighteed to 2.8 Nm of 21 C C *Service ratigs are based o hydrostatic tests usig stadard-molded Bua-N material gaskets (see type 1 gaskets), with proper istallatio of ferrules, assembly of joits ad absece of shock pressure. Cotact Tri-Clover for service of other type ad material gaskets, ad for ratigs at higher temperatures. ll ratigs show are depedet upo related compoets withi the systems ad proper istallatio. For temperatures above 121 C, we recommed usig oly #13MHP clamps. This iformatio is oly valid if Tri-Clover clamps, ferrules, ad gaskets are used. 39

40 Swivel Joit 12MPS - Swivel Joit i mm i mm 1¹ ₂ ⁶³ ₆₄ ³³ ₆₄ ¹ ₂ ³ ₆₄ ³⁷ ₆₄ MPS Swivel Joit The Swivel joit cosists of a PTFE isert that sets iside a modified 13MHHM Tri-Clamp. The isert holds the matig Tri-Clamp ferrules (ferrules ot icluded) ad a PTFE gasket as the liquid seal. The ature of the PTFE isert ad gasket allows the ferrules to rotate idepedetly of each other ad of the orietatio of the clamp. Swivel joits are iteded for use ONLY i LOW TEMPERTURE & PRESSURE applicatios, such as divertig out of a process lie from oe tak to aother adjacet vessel. NOT iteded for use i geeral clamp applicatios. Pressure service ratig whe used with a 13MHHM clamp (wig ut tighteed to 25 i. lb. torque, 2.8 Nm) 70 F, 50 psi (21 C, 3.4 bar). Material Optio: Type 304 SS 40

41 Tri-Clamp Gaskets Tri-Clamp Gaskets are produced i three basic desigs i a variety of materials that are otoxic, o-absorbet, ad resistat to cotact media. Iformatio o geeral service characteristics of gasket materials will be furished upo request. Type 1: Stadard-Molded, oe piece o-rig gasket is ecoomical ad depedable. vailable from stock, 1-4" ( mm). Part Descriptio Material 40MP-U Bua N 40MP-UW White Bua N 40MP-X Silicoe 40MP-E EPDM 40MP-E-SF EPDM Sulfur Free 40MP-N Polyethylee 40MP-G PTFE** 40MP-SFY Steam Resistat Fluoroelastomer Type 2: Flaged-Molded flaged o-rig gasket with special sap-o rim desig. Fits sugly ad stays i positio. vailable from stock, 1-4" ( mm). Not for use with 13MHP clamps. Part Descriptio 40MPF-U 40MPF-UW 40MPF-X 40MPF-E 40MPF-SFY Material Bua N White Bua N Silicoe EPDM Steam Resistat Fluoroelastomer Type 3: Evelope gasket* has PTFE** outer jacket with circular slot type sectio to sadwich a Fluoroelastomer rubber isert. vailable from stock, 1-4" ( mm). Part Descriptio 40MP-GR Material PTFE** * U.S. Patet No. 3,775,832 ** Poly Tetra Fluoro Ethylee (see below) Ethylee Propylee Diee Moomer Special 40MHP gasket for 1" (25.4 mm) coectios utilizig 13MHP clamp. vailable i two materials, 1" (25.4 mm) size oly (appearace is similar to the Type 1). Part Descriptio Material 40MHP-E EPDM 40MHP-SFY Steam Resistat Fluoroelastomer 41

42 Tri-Clamp Gaskets 42MP Gasket: Gaskets are available i two sizes: ½" ad ¾" (12.7 ad 19.0 mm) ad four types of material as follows: Bua N - 42MP - U - Fluoroelastomer - 42MP - SFY - EPDM - 42MP - E - EPDM Sulfur Free - 42MP - E - SF - PTFE - 42MP - G - * Dimesio B " (22 mm) B * Poly Tetra Fluro Ethylee TRI-CLOVER ORIFICE PLTE GSKET/FLOW RESTRICTOR Molded o-rig gasket with type 316L stailess steel plate i ceter. Furished with ¹ ₈" (3.2 mm) diameter hole i ceter. s 1½-3" ( mm). Tube OD 80MP-U 80MP-E 80MP-SFY Material BUN N EPDM Steam Resistat Fluoroelastomer SPECIL NOTE CONCERNING THE LIMITED USE OF PTFE GSKETS: Pressure Service Ratigs show o pages 38 & 39 for Tri-Clover clamps DO NOT PPLY to 1" (25.4 mm) ad above Tube OD sized coectios icorporatig ay gaskets of PTFE material. s PTFE material by ature is virtually icompressible ad teds to "cold flow" uder ormal operatig coditios, PTFE gaskets, whe used with ay stadard clamp, are likely to leak at pressures far below these published service ratigs. We do ot recommed their use at temperatures above 200 F (93 C). To avoid possible leakage problems, we highly recommed cosultig Tri-Clover before cosiderig the use of PTFE material. Our past experiece has show that i the majority of product applicatios, PTFE is ot required. Please cotact us for specific test ratigs o PTFE materials, ad to discuss other viable alteratives. Due to the recessed, full cotaimet desig of Fractioal d Tri-Clamp ed coectios, the above limitatios do ot apply to Tri-Clamp Fractioal d ½-¾" ( mm) Tube OD fittigs ad coectios. 42

43 Pipe Hager ad Supports (304SS) Pipelie Hager ad Support (304SS) with Rubber Iserts for use with Tube OD Pipelies Oly 24FCF For Tube (OD) B i mm i mm i mm ¹ ₂ ¹ ₂ ¹ ₂ ⁹ ₁₆ ¹ ₂ ⁹ ₁₆ ¹¹ ₁₆ Floor Stad ssembly (ot show) 20C available for tube sizes: 1½ (38.1mm), 2 (50.8mm), 2½ (63.5mm), ad 3 (76.2mm). Order Iformatio 24FCF--S, Pipelie Hager with BUN iserts 24FCF--S-SF, Pipelie Hager with Vito iserts The hager portio of the above assemblies was desiged so that two basic hagers cover the complete rage of sizes. By usig rubber isert pads, the smaller of the two hagers ca be used o 1½ (38.1mm), or 2 (50.8mm) sizes, the larger o the 2½ (63.5mm) ad 3 (76.2mm). To icrease from 1½ (38.1mm) to 2 (50.8mm), or from 2½ (63.5mm) to 3 (76.2mm), order iserts 24FCF-2-08 (for BUN) or 24FCF-2-08-SFY (for Vito). To decrease from 2 (50.8mm) to 1½ (38.1mm), or from 3 (76.2mm) to 2½ (63.5mm), order iserts 24FCF-1½-08 (for BUN) or 24FCF-1½-08-SFY (for Vito). Four iserts are required. Refer to Bulleti WPS for complete istallatio data ad proper pipig istallatio. 43

44 Two-Piece Hager (304SS) Pipelie Hager for Field Weldig (304SS) with Rubber Iserts for use with Tube OD Pipelies Oly B24FCF For Tube (OD) B i mm i mm i mm ¹ ₂ ¹¹ ₁₆ 68.3 ¹ ₂ 12.7 ³ ₄ ¹¹ ₁₆ 68.3 ³ ₄ ¹ ₄ ¹ ₂ ³ ₄ ¹ ₂ ¹ ₄ ¹ ₂ ³ ₄ ¹ ₂ ¹ ₄ ¹ ₄ Pipelie Hager/Threaded Coectio Pre-Welded (304SS) with Rubber Iserts for use with Tube OD Pipelies Oly C24FCF For Tube (OD) B i mm i mm i mm ¹ ₂ ¹¹ ₁₆ 68.3 ¹ ₂ 12.7 ³ ₄ ¹¹ ₁₆ 68.3 ³ ₄ ¹ ₄ ¹ ₂ ³ ₄ ¹ ₂ ¹ ₄ ¹ ₂ ³ ₄ ¹ ₂ ¹ ₄ ¹ ₄

45 Two-Piece Hager (304SS) Order Iformatio B24FCF--S, Pipelie Hager for Field Weldig with BUN iserts B24FCF--S-S, Pipelie Hager for Field Weldig with Vito iserts C24FCF--S, Pipelie Hager/Threaded Coectio Pre-Welded with BUN iserts C24FCF--S-S, Pipelie Hager/Threaded Coectio Pre-Welded with Vito iserts 1 (25.4mm) through 4 (101.6mm) hagers require 2 iserts, oe o each side, while ½ (12.7mm) ad ¾ (19.0mm) hagers use a roud, sigle isert desig. To icrease from ½ (12.7mm) to ¾ (19.0mm), order isert B24FCF-¾-02 (BUN), or B24FCF-¾-02-S (Vito) for B or C style hagers. To decrease from ¾ (19.0mm) to ½ (12.7mm), order isert B24FCF-½-02 (BUN), or B24FCF-½-02-S (Vito) for B or C style hagers. ½ (12.7mm) ad ¾ (19.0mm) hager sizes ca be chaged by orderig differet size iserts. Refer to Bulleti WPS for complete istallatio data ad proper pipig istallatio. 45

46

47 Valves Pumps Fittigs Mix-Proof - Catalog MPV Multiple actuator stem desigs with full stroke capability. ir-ctuated - Catalog V May styles for automatic flow, ad full CIP capability. lso available with optioal cotrol top housig. 1"- 4" ( mm) sizes. Fractioal s - Bulleti FV Type 316L SS. 1 /2" & 3 /4" (12.7 ad 19.0mm) sizes. Ball - Bulleti BV 3-piece body with PTFE seats ad packig. 1"-4" ( mm) sizes. Butterfly - Bulleti BFV lumium body. daptable to a variety of ed coectios. 1"- 4" ( mm) sizes. SS Butterfly - Bulleti B51 Stailess steel body. Tri-Clamp ed coectios. Variety of seat materials. 1 1 /2" - 6" ( mm) sizes. Sauders Diaphragm - Catalog SV For sterile applicatios. 1 /4"- 4" ( mm) sizes. Miscellaeous Valves - Catalog MV Compressor, Plug, Relief, ad Check Valves. 1" - 4" ( mm) Tube OD. C Series Cetrifugal - Catalog TF 5 sizes i capabilities to 1150 GPM (261 m 3 /hr). 1 1 /2" - 6" ( mm) ilet. CL Series Cetrifugal - Catalog CL 11 sizes i capacities to 2000 GPM (454 m 3 /hr). 2 1 /2" - 4" ( mm) ilet. CL WFI (Water For Ijectio/Pharmaceuticals) - Bulleti CLWFI 4 sizes i capacities to 700 GPM (159 m 3 /hr). 1 1 /2"- 4" ( mm) ilet. Series EH Cetrifugal (Low Shear) - Bulleti EH 3 sizes i capacities to 1000 GPM (227 m 3 /hr). 3" - 6" ( mm) ilet. Positive Rotary - Catalog PR 6 sizes to 300 GPM. (68 m 3 /hr). 1"- 6" ( mm) ilet ad outlet. T Series Positive Rotary -Bulleti TS (TSR Stadard Rotor Desig) 12 sizes to 500 GPM/290 PSI. (113 m 3 /hr/20 BR) 1" - 6" ( mm) ilet ad outlet. (TSK Ultra CIP) 5 sizes to 250 GPM/145 psi (56.5 m 3 /hr/10 bar) 1" - 3" ( mm) ilet ad outlet. Diaphragm Pumps - Bulleti OD 5 sizes to 200 GPM/100 psi. (45 m 3 /hr/7 bar) 1 /4" - 4" ( mm) ilet ad outlet. Saitary Fittigs - Catalog FTGS Tri-Clamp, Tri-Weld, ad Bevel Seat for the food, beverage ad dairy idustry - 1" - 4" ( mm) Bio-Pharm Fittigs - Catalog BFTGS Tri-Clamp ad Tri-Weld mechai cal ad electropolished fittigs for the bioprocessig idustry - ½" - 4" ( mm) L-6XN - Bulleti L6-FT Saitary 1-3 ( mm) Tube OD. utomated Systems Tri-Bleder - Bulleti TB Bleds up to 350 lb./mi. (159 kg) dry powder with up to 150 GPM. (34 m 3 /hr). CIP Systems - Bulleti CIP Four stadard models. Variatios for hot saitizig service. Filters/Straiers - Bulleti BFS Built to saitary stadards. Low pressure drop ad exteded service. Bio-Pharm Systems - Bulleti BP rage of products for Bio-Pharm applicatios. Followig are all registered trademarks of Tri-Clover Ic. Tri-Clover Tri-Bleder Tri-Clamp Super-Speed Tri-Weld Maistream Tri-Taper Streamlie L-6XN is a registered trademark of lleghey Ludlum Corporatio.

48 Globe will be placed here by merigraphics Compay Egieered For The Customers We Serve Our Food & Dairy ad Bio-Pharm Divisios esure the highest levels of customer support i the idustry. Each divisio is orgaized to provide specific applicatio, equipmet ad logistics support to help our customers achieve the highest levels of process system efficiecy. For more iformatio o how Tri-Clover ca be of beefit to your compay, cotact your local Tri- Clover distributor, or call us at Tri-Clover Ic. Bulleti PHRM-99 5M 1/99 Prited i the U.S..