Energy saving ventilation Air handling units (Catalogue no. 2) Industrial and commercial ventilation. (Catalogue no. 1)

Size: px

Start display at page:

Download "Energy saving ventilation Air handling units (Catalogue no. 2) Industrial and commercial ventilation. (Catalogue no. 1)"

Miles McCoy
5 years ago
Views:

Industril nd ommeril ventiltion (Ctlogue no.

sound-insulted, xil nd roof fns, ir hndling units with het reovery, ir heting

2) Energy sving supply nd exhust units nd ir hndling units with het reovery with

5) Fire dmpers KPU for smoke protetion systems of uildings nd premises.

6) omesti ventiltion: fns, mono-pipe exhust kithen nd throom fns, ir distriution

) for ventiltion, ir onditioning nd heting. Aess doors (Ctlogue no.

Speil offers for ermi tiles. Spirl sem ir duts (Ctlogue no.

2 Industril nd ommeril ventiltion (Ctlogue no. 1) Industril nd ommeril ventiltion omponents - fns for round nd retngulr duts, sound-insulted, xil nd roof fns, ir hndling units with het reovery, ir heting units, essories. Energy sving ventiltion Air hndling units (Ctlogue no. 2) Energy sving supply nd exhust units nd ir hndling units with het reovery with ir pity up to 6500 m 3 /h. Fire nd smoke dmper KPU (Ctlogue no. 5) Fire dmpers KPU for smoke protetion systems of uildings nd premises. omesti ventiltion (Ctlogue no. 6) omesti ventiltion: fns, mono-pipe exhust kithen nd throom fns, ir distriution units, ir duts nd fittings, ess doors, ventiltion kits. Air distriution units (Ctlogue no. 9) Plsti nd metl ir distriution produts (grilles, disk vlves, diffusers, et.) for ventiltion, ir onditioning nd heting. Aess doors (Ctlogue no. 10) Plsti nd metl ess doors for essing oneled equipment nd utility lines. Speil offers for ermi tiles. Spirl sem ir duts (Ctlogue no. 13) SPIROVENT spirl sem vent duts nd fittings of 100 to 1600 mm dimeter. Flexile duts nd fittings for ventiltion, ir onditioning nd heting (Ctlogue no. 14) Flexile nd semi-flexile ir duts mde of polymeri mterils, luminium, glvnized or stinless steel, metl fittings for ventiltion, ir onditioning, heting, gs hndling nd rsive prtiles spirtion.

use in lrge residentil, industril nd ommeril ojets.

4) Energy sving system GEO VENTS with use of the erth s surfe lyers

humidity sensor, motion sensor, et. Applied for premises up to 30 m 2.

8) Exhust ventiltion in houses with mono-pipe ventiltion system sed on

Plsti grilles for ventiltion nd ir onditioning (Ctlogue no.

Metl grilles for ventiltion, ir onditioning nd heting (Ctlogue no.

onditioning. Flt nd round PVC ir duts (Ctlogue no.

offie nd ommeril premises nd onnetion of exhust ventiltion equipment

3 Air hndling units AIRVENTS (Ctlogue no. 3) Energy sving ir hndling units with ir pity up to m 3 /h, for use in lrge residentil, industril nd ommeril ojets. Energy sving ventiltion Geotherml systems GEO VENTS (Ctlogue no. 4) Energy sving system GEO VENTS with use of the erth s surfe lyers het. High ventiltion system energy effiieny nd low operting osts. omesti fns (Ctlogue no. 7) omesti fns with ir pity up to 365 m 3 /h with extr funtions: timer, humidity sensor, motion sensor, et. Applied for premises up to 30 m 2. VENTS VN Mono-pipe exhust ventiltion (Ctlogue no. 8) Exhust ventiltion in houses with mono-pipe ventiltion system sed on VENTS VN fns. Plsti grilles for ventiltion nd ir onditioning (Ctlogue no. 11) PROFIPLAST extruded plsti grilles for ventiltion nd ir onditioning. Metl grilles for ventiltion, ir onditioning nd heting (Ctlogue no. 12) Metl grilles mde of extruded metl profile for ventiltion nd ir onditioning. Flt nd round PVC ir duts (Ctlogue no. 15) Flt nd round PVC duts PLASTIVENT for ventiltion of residentil, offie nd ommeril premises nd onnetion of exhust ventiltion equipment (kithen extrtors, hoods, exhust oxes, et). Wide produt rnge of fittings. Energy sving ventiltion. Single room energy reovery ventiltors. (Ctlogue no.16) Single room reverse ventiltors with energy regenertion for effiient ventiltion nd lowest investments in redy-uilt nd rnd new premises.

4 CONTENT Aout us pge 4 Advntges of Plstivent system pge 6 exmples pge 10 Round ir dutwork system pge 16 Flt ir dutwork system pge 22 VENTS. Flt nd round PVC dutworks Ctlog

WELCOME TO THE VENTS WORL! VENTS ompny ws founded in the nineties of the XXth entury.

VENTS is powerful reserh nd development enterprise with 2500 professionls working s single tem to ensure full prodution yle from ide to end produt.

Modern equipment, tive implementtion of dvned tehnologies nd highly utomted prodution re the hrteristi fetures of VENTS ompny.

5 WELCOME TO THE VENTS WORL! VENTS ompny ws founded in the nineties of the XXth entury. ynmi development of the enterprise nd ongoing study of the onsumer demnd enled rpid interntionl ledership of the ompny in the ventiltion industry. VENTS is powerful reserh nd development enterprise with 2500 professionls working s single tem to ensure full prodution yle from ide to end produt. The prodution se of the ompny is loted t more thn m 2 re. It inludes 16 workshops equipped under the ltest interntionl stndrds nd eh of them is omprle to seprte plnt. Modern equipment, tive implementtion of dvned tehnologies nd highly utomted prodution re the hrteristi fetures of VENTS ompny. The ompny undergoes rpid dynmi development; fundmentl reserhes nd effetive designs in limti equipment industry re in the fous of the ompny s usiness strtegy. The joint oopertion of the orporte design deprtment, test lortories nd prodution workshops let us introdue high qulity produts to the mrket. Speil ttention is pid to the mnufturing of the goods during ll mnufturing stges inluding monitoring of the tehnologil onditions. Tehnil hrteristis of supplied rw mterils re thoroughly heked. Qulity ontrol system whih meets interntionl stndrd requirements ISO 9001:2000 ws implemented t the enterprise. Environmentl protetion is one of the si omponents of the orporte development. The tehnologil proess t the enterprise is rrnged in suh wy s to exlude ny negtive impt to the environment. To solve the glol energy sving prolem we develop speil limti equipment tht provides omfortle onditions for people nd redues the energy demnd signifintly. Perfet qulity, ompetitive pries, high prodution potentil, tehnil pilities nd the wide produt rnge stimulte long-term prtrnership nd produt promotion ll over the world. The VENTS ventiltion produts re exported to more thn 90 ountries nd re sold through the distriution network of 120 ompnies worldwide. Shre of the VENTS produts glolly is ove 10%. VENTS is memer of high-rnk interntionl orgniztions, the leding HVAC experts. Sine 2008 VENTS hs een fully-fetured memer of HARI Assoition (Heting, Air-onditioning nd Refrigertion istriutors Interntionl, USA). Sine 2010 VENTS hs een prtiipnt of AMCA Assoition (the Air Movement nd Control Assoition (AMCA) Interntionl, In.). In 2011 VENTS suessfully pssed tests for ompline with AMCA stndrds nd the VENTS produts were ertified for the USA mrket. In 2011 VENTS joined HVI (Home Ventiltion Institute, USA) Assoition. 4 VENTS. Flt nd round PVC dutworks Ctlog

6 Metl proessing workshop Spirl ir duts workshop Flexile ir duts workshop Aluminium grilles nd diffusers workshop Powder oting workshop Wet oting workshop Extrusion workshop Injetion moulding workshop Residentil fns workshop Ventiltion grilles workshop Eletri motors workshop Industril fns workshop Air hndling units workshop AirVents ir hndling unit workshop Eletril essories workshop Extruded grilles workshop Powerful prodution filities, high utomtion level, tive implementtion of innovtive tehnologies in the prodution proess mde VENTS worldwide ventiltion leder. We mnufture our produts with respet to unique geogrphil, limti, tehnil fetures of eh ountry nd do our est to fulfill the lient's wishes nywhere nytime. Get enefit from oopertion with VENTSTM nd enjoy the mximum rnge of produts of the top qulity from one mnufturer. VENTS. Flt nd round PVC dutworks Ctlog

FLAT AN ROUN PVC UCTWORKS "Plstivent" ir dutwork system is the idel solution for rrngement of ventiltion systems in smll nd

ends, reduers, onnetors, et. Opertion temperture from -30 0 С up to +70 0 С.

exlusively on "Plstivent" system omponents. Smooth inner dut surfe provides low ir resistne.

Ventiltion system sed on "Plstivent" ir duts produes lower noise level s ompred to other systems with orrugted or steel ir duts.

7 FLAT AN ROUN PVC UCTWORKS "Plstivent" ir dutwork system is the idel solution for rrngement of ventiltion systems in smll nd medium-sized residentil, offie nd ommeril premises s well for onnetion of ooker hoods, exhust hoods, owls nd other exhust equipment. It inludes retngulr 55x110, 60x120, 60x204 mm ir duts, round Ø 100, 125, 150, 200 mm ir duts nd gret vriety of fittings suh s ends, reduers, onnetors, et. Opertion temperture from С up to С. Bsi dvntges of "Plstivent" system: A gret vriety of fittings designed for ssemly of omplex dutworks with ny geometry sed exlusively on "Plstivent" system omponents. Smooth inner dut surfe provides low ir resistne. Corrosion resistnt properties ensure long servie life. Low weight. Ventiltion system sed on "Plstivent" ir duts produes lower noise level s ompred to other systems with orrugted or steel ir duts. Low therml ondutivity Environmentlly friendly plsti used for mnufture of "Plstivent" system does not sustin omustion. Extremely esy mounting due to no omplited ssemly opertions nd speil tools. Smll overll dimensions of the retngulr omponents llow using the system in limited re ove flse eilings. Aestheti view mkes the system suitle for mounting in redy-mde premises. 6 VENTS. Flt nd round PVC dutworks Ctlog

8 pge 16 Round dut Round telesopi dut pge 17 Round flexile dut onnetor 90 end for round duts T-joint for round duts pge 18 Wll plte for round duts Round dut onnetor Connetor with kdrft dmper for round duts Connetor with kdrft dmper nd wll plte for round duts Connetor with plte for round duts Reduer pge 19 VENTS. Flt nd round PVC dutworks Ctlog

9 pge 20 Reduer Step round reduer Round to flt onnetor pge 21 Round flexile dut onnetor Holder for round duts pge 22 Flt dut Flt dut onnetor Flt dut onnetor with dmper pge 23 Flexile flt dut onnetor Air dut onnetor with plte Air dut onnetor with plte nd k vlve 8 VENTS. Flt nd round PVC dutworks Ctlog

Wll plte for flt duts pge 27 End grille End grille with ir pss regultion Reduer for flt nd round duts pge 28 Reduer

10 pge 24 Vertil 90 end for flt duts Horizontl 90 end for flt duts Verstile flt ngulr onnetor pge 25 T-joint for flt duts Flt dut holder 90 onneting end for flt nd round duts pge 26 T-joint for flt nd round duts Reduer for flt duts Wll plte for flt duts pge 27 End grille End grille with ir pss regultion Reduer for flt nd round duts pge 28 Reduer for flt nd round duts Wll plte with flnge Round to flt onnetor (symmetri) VENTS. Flt nd round PVC dutworks Ctlog

11 APPLICATION EXAMPLES Kithen 10 VENTS. Flt nd round PVC dutworks Ctlog

12 APPLICATION EXAMPLES Bthroom Aprtment VENTS. Flt nd round PVC dutworks Ctlog

13 APPLICATION EXAMPLES Cfe Vents ВК 125 Aluvent Ø125 Aluvent Ø125 MV 120 VJ С 125 A 125 VRF A 125 VRF A 125 VRF A 125 VRF Aluvent Ø 150 A 150 VRF Aluvent Ø 125 A 125 VRF Aluvent Ø 100 Plstivent s extension of tin ir duts A 100 VRF 12 VENTS. Flt nd round PVC dutworks Ctlog

14 APPLICATION EXAMPLES House Aluvent Ø 125 C 125 Aluvent Ø 125 C 125 C 125 A 125 VR A 125 VR A 125 VR A 125 VR VENTS. Flt nd round PVC dutworks Ctlog

15 APPLICATION EXAMPLES Offie Aluvent Ø125 A 125 VRF C 125 C 125 Aluvent Ø150 Aluvent Ø125 A 125 VRF Vents VK 150 MVM 300 FB VENTS. Flt nd round PVC dutworks Ctlog

16 APPLICATION EXAMPLES Vents 150 VK Aluvent Ø125 C 125 A 125 VRF Aluvent Ø125 C 125 A 125 VRF Aluvent Ø125 C 125 C 125 A 125 VRF A 125 VRF Aluvent Ø125 C 125 A 125 VRF VENTS. Flt nd round PVC dutworks Ctlog

ROUN PVC UCTWORK SYSTEM Round dut Supply nd exhust ventiltion of vrious premises. Formtion of round ir dutworks. Mde of white PVC. imeters: 100, 125, 150 nd 200 mm. ut length from 350 to 2500 mm.

L 1 1 L 10035 100 103 350 20035 125 128 350 30035 150 153 350 40035 200 204 350 1005 100 103 500 2005 125 128 500 3005 150 153 500 4005 200 204 500 1010 100 103 1000 2010 125 128 1000 3010 150 153

17 ROUN PVC UCTWORK SYSTEM Round dut Supply nd exhust ventiltion of vrious premises. Formtion of round ir dutworks. Mde of white PVC. imeters: 100, 125, 150 nd 200 mm. ut length from 350 to 2500 mm. Conneted with mthing dimeter onnetors. L 1 1 L L / / / / / / / / / / / / Round telesopi dut Supply nd exhust ventiltion of vrious premises. Wll mounting. Mde of white PVC. Telesopi design of two prts. imeters: 100, 125, 150 mm. Air dut length is djusted within 300 to 500 mm or 500 to 1000 mm L L 2 inner dut outer dut 16 VENTS. Flt nd round PVC dutworks Ctlog

ROUN PVC UCTWORK SYSTEM Round flexile dut onnetor Supply nd exhust ventiltion of vrious premises. Connetion of flexile round duts. Mde of white PVC.

а 1 1113 60 100 103 2123 60 125 128 3133 60 150 153 4143 60 200 204 1 90 end for round duts Supply nd exhust ventiltion of vrious premises.

1 а 121 100 97 137 30 222 125 122 164 30 323 150 147 189 30 1 T-joint for round duts Formtion of rnh onnetions in supply or exhust ventiltion systems loted in

18 ROUN PVC UCTWORK SYSTEM Round flexile dut onnetor Supply nd exhust ventiltion of vrious premises. Connetion of flexile round duts. Mde of white PVC. Cover the onnetor with ir dut nd fix it with lmps. Conneting dimeters: 100, 125, 150, 200 mm. а end for round duts Supply nd exhust ventiltion of vrious premises. Connetion of sme dimeter ir duts t 90. Mde of white plsti. Conneting dimeters: 100, 125, 150 mm. 1 а T-joint for round duts Formtion of rnh onnetions in supply or exhust ventiltion systems loted in residentil, puli nd other uildings. Connetion of sme dimeter round duts nd integrtion into omplex ventiltion systems. Mde of white plsti. Connetion of sme dimeter three round duts t 90. Conneting dimeters: 100, 125, 150 mm. 1 а VENTS. Flt nd round PVC dutworks Ctlog

ROUN PVC UCTWORK SYSTEM Wll plte for round duts Supply nd exhust ventiltion of vrious premises. Connetion of ir duts to ventiltion shfts. eortion of mounting openings.

h 15 103 3 150 134 25 128 3 170 154 35 151 3 204 188 45 204 3 284 268 h Round dut onnetor Supply nd exhust ventiltion of vrious premises. Connetion of sme dimeter ir duts.

1 а 111 100 96 62 212 125 123 62 313 150 148 62 414 200 197 62 1 Connetor with kdrft dmper for round duts Supply nd exhust ventiltion of vrious premises.

19 ROUN PVC UCTWORK SYSTEM Wll plte for round duts Supply nd exhust ventiltion of vrious premises. Connetion of ir duts to ventiltion shfts. eortion of mounting openings. Mde of white plsti. Srew fixing to wll. Conneting dimeters: 100, 125, 150, 200 mm. h h Round dut onnetor Supply nd exhust ventiltion of vrious premises. Connetion of sme dimeter ir duts. Mde of white plsti. ed for diret instlltion into ir dut nd equipped with lok ring. Conneting dimeters: 100, 125, 150, 200 mm. 1 а Connetor with kdrft dmper for round duts Supply nd exhust ventiltion of vrious premises. Connetion of sme dimeter ir duts. Mde of white plsti. Equipped with kdrft dmper for k flow prevention. ed for diret instlltion into ir dut nd equipped with lok ring. Conneting dimeters: 100, 125, 150, 200 mm. 1 а VENTS. Flt nd round PVC dutworks Ctlog

ROUN PVC UCTWORK SYSTEM Connetor with kdrft dmper nd wll plte for round duts Supply nd exhust ventiltion of vrious premises.

Equipped with kdrft dmper for k flow prevention. Srew fixing to wll. Conneting dimeters: 100, 125, 150, 200 mm.

vrious premises. Srew fixing to wll. Conneting dimeters: 100, 125, 150, 200 mm.

Connetion of vrious dimeter ir duts. Mde of white plsti. Conneting dimeters: 80-100, 100-120, 100-125, 100-150, 125-150, 150-200 mm.

20 ROUN PVC UCTWORK SYSTEM Connetor with kdrft dmper nd wll plte for round duts Supply nd exhust ventiltion of vrious premises. Connetion of sme dimeter ir duts. eortion of mounting openings. Mde of white plsti. Equipped with wll plte for deortion of mounting openings. Equipped with kdrft dmper for k flow prevention. Srew fixing to wll. Conneting dimeters: 100, 125, 150, 200 mm. а Connetor with plte for round duts Supply nd exhust ventiltion of vrious premises. Connetion of sme dimeter ir duts. eortion of mounting openings. Mde of white plsti. Equipped with wll plte for deortion of mounting openings. Srew fixing to wll. Conneting dimeters: 100, 125, 150, 200 mm. а Reduer Supply nd exhust ventiltion of vrious premises. Connetion of vrious dimeter ir duts. Mde of white plsti. Conneting dimeters: , , , , , mm. а , ,5 99 VENTS. Flt nd round PVC dutworks Ctlog

ROUN PVC UCTWORK SYSTEM Reduer Supply nd exhust ventiltion of vrious premises. Connetion of Ø 120 nd 125 mm round ir duts. Mde of white plsti.

Connetion of vrious sized ir dut. Mde of white plsti. Conneting dimeters: 80-100-120-125-150 mm.

Ø 150 125 120 100 80 310 125 80-100-120-125-150 Round to flt onnetor Supply nd exhust ventiltion of vrious premises.

21 ROUN PVC UCTWORK SYSTEM Reduer Supply nd exhust ventiltion of vrious premises. Connetion of Ø 120 nd 125 mm round ir duts. Mde of white plsti. Conneting dimeters: mm Round step reduer Supply nd exhust ventiltion of vrious premises. Connetion of vrious sized ir dut. Mde of white plsti. Conneting dimeters: mm. Cut out spre length piee to get the required size. Ø Round to flt onnetor Supply nd exhust ventiltion of vrious premises. Connetion of round nd flt duts. Mde of white plsti. iret onnetion to round nd flt duts. Conneting duts: x100, x122, x204 mm L L VENTS. Flt nd round PVC dutworks Ctlog

ROUN PVC UCTWORK SYSTEM Round flexile dut onnetor Supply nd exhust ventiltion of vrious premises. Connetion of flexile duts with plsti system omponents. Mde of white plsti.

Right thred onnetors re used with Polyvents ir duts. А B C E 1214 90 30 60 100 110 1214R 90 30 60 100 110 internl B C A E Round flexile dut onnetor Supply nd exhust ventiltion of vrious premises.

Flexile spirl sem dut is onneted to one side nd the other side is onneted to Ø 100 mm ir dut. Left or right (R) thred. Right thred onnetors re used with Polyvents ir duts.

22 ROUN PVC UCTWORK SYSTEM Round flexile dut onnetor Supply nd exhust ventiltion of vrious premises. Connetion of flexile duts with plsti system omponents. Mde of white plsti. Connetion to flexile ir duts without lmps. Flexile spirl sem dut is onneted to one side nd the other side is onneted to Ø 100 mm flnge. Left or right (R) thred. Right thred onnetors re used with Polyvents ir duts. А B C E R internl B C A E Round flexile dut onnetor Supply nd exhust ventiltion of vrious premises. Connetion of flexile duts with plsti system omponents. Mde of white plsti. Connetion to flexile ir duts without lmps. Flexile spirl sem dut is onneted to one side nd the other side is onneted to Ø 100 mm ir dut. Left or right (R) thred. Right thred onnetors re used with Polyvents ir duts. А B C E R externl A E B C Holder for round duts Supply nd exhust ventiltion of vrious premises. Mounting of round duts to wll, eiling or ny other plne surfe. Mde of white plsti. Fixtion to plne surfe with srews. Speil snps provide relile fixtion of the dut with the holder. Conneting dimeters: 100, 125, 150, 200 mm. а VENTS. Flt nd round PVC dutworks Ctlog

FLAT PVC UCTWORK SYSTEM Flt dut Supply nd exhust ventiltion of vrious premises. Formtion of flt ir dutworks. Mde of white PVC. Size: 55x110, 60x122, 60x204 mm. ut length from 350 to 2500 mm.

1 1 L 50035 55 110 52 107 350 70035 60 122 57 119 350 80035 60 204 57 200 350 5005 55 110 52 107 500 7005 60 122 57 119 500 8005 60 204 57 200 500 5010 55 110 52 107 1000 7010 60 122 57 119 1000 8010

7025 60 122 57 119 2500 8025 60 204 57 200 2500 Flt dut onnetor Supply nd exhust ventiltion of vrious premises. Connetion of sme sized flt duts. Mde of white plsti.

23 FLAT PVC UCTWORK SYSTEM Flt dut Supply nd exhust ventiltion of vrious premises. Formtion of flt ir dutworks. Mde of white PVC. Size: 55x110, 60x122, 60x204 mm. ut length from 350 to 2500 mm. Conneted with mthing onnetors. 1 1 L L L Flt dut onnetor Supply nd exhust ventiltion of vrious premises. Connetion of sme sized flt duts. Mde of white plsti. ed for instlltion into ir dut nd equipped with lok ring for esy jointing. Conneting sizes: 55x100, 60x122, 60x204 mm Flt dut onnetor with dmper Supply nd exhust ventiltion of vrious premises. Connetion of sme sized flt duts. Mde of white plsti. ed for instlltion into ir dut nd equipped with lok ring for esy jointing. Equipped with kdrft dmper for k flow prevention. Conneting sizes: 55x100, 60x122, 60x204 mm VENTS. Flt nd round PVC dutworks Ctlog

FLAT PVC UCTWORK SYSTEM Flexile flt dut onnetor Supply nd exhust ventiltion of vrious premises. Connetion of sme sized flt flexile duts. Mde of white PVC.

1 1 1 5153 55 110 52 107 60 7173 60 122 57 119 60 1 8183 60 204 57 200 60 Air dut onnetor with plte Supply or exhust ventiltion of vrious premises. Connetion of single size flt ir duts.

Conneting sizes: 55х110, 60х120, 60х204 mm.

24 FLAT PVC UCTWORK SYSTEM Flexile flt dut onnetor Supply nd exhust ventiltion of vrious premises. Connetion of sme sized flt flexile duts. Mde of white PVC. Cover the onnetor with ir dut nd fix it with lmps. Conneting sizes: 55x100, 60x122, 60x204 mm Air dut onnetor with plte Supply or exhust ventiltion of vrious premises. Connetion of single size flt ir duts. eortion of mounting opening nd onnetions to wll. Mde of white plsti. Air duts re fitted inside the onnetor. Equipped with lok rings for esy djustment. Srew fixing to wll. Conneting sizes: 55х110, 60х120, 60х204 mm. A B C L Air dut onnetor with plte nd k vlve Supply or exhust ventiltion of vrious premises. Connetion of single size flt ir duts. eortion of mounting opening nd onnetions to wll. Mde of white plsti. Air duts re fitted inside the onnetor. Equipped with lok rings for esy djustment. Equipped with k vlve to prevent k drfting. Srew fixing to wll. Conneting sizes: 55х110, 60х120, 60х204 mm. A B C L VENTS. Flt nd round PVC dutworks Ctlog

FLAT PVC UCTWORK SYSTEM Vertil 90 end for flt duts Supply nd exhust ventiltion of vrious premises. Connetion of sme sized flt duts t 90 vertilly.

5252 55x110 89 32 7272 60x120 93 32 8282 60x204 103 42 Horizontl 90 end for flt duts Supply nd exhust ventiltion of vrious premises.

5251 55х110 143 32 7271 60х122 155 32 8281 60х204 238 32 Verstile flt ngulr onnetor Supply nd exhust ventiltion of vrious premises. Angulr onnetion of flt duts.

25 FLAT PVC UCTWORK SYSTEM Vertil 90 end for flt duts Supply nd exhust ventiltion of vrious premises. Connetion of sme sized flt duts t 90 vertilly. Mde of white plsti. Conneting sizes: 55x100, 60x122, 60x204 mm x x x Horizontl 90 end for flt duts Supply nd exhust ventiltion of vrious premises. Connetion of sme sized flt duts t 90 horizontlly. Mde of white plsti. Conneting sizes: 55x100, 60x122, 60x204 mm х х х Verstile flt ngulr onnetor Supply nd exhust ventiltion of vrious premises. Angulr onnetion of flt duts. Mde of white plsti. Turning point ngle from 3 to 48. epending on seleted turning ngle one onnetor side is ut out. Connetion to the flt dut through mthing sized onnetor. On flnge side diret onnetion to flt dut of respetive size. Conneting setion: 55x100 nd 60x204 mm х х VENTS. Flt nd round PVC dutworks Ctlog

FLAT PVC UCTWORK SYSTEM T-joint for flt duts Formtion of rnh onnetions in supply or exhust ventiltion systems loted in residentil, puli nd other uildings.

iret onnetion to mthing sized duts. с 535 144 174 55х110 737 155 185 60х122 838 248 288 60х204 Flt dut holder Supply nd exhust ventiltion of vrious premises.

Conneting sizes: 55x100, 60x122, 60x204 mm. 56 114 59 74 76 126 64 86 86 209 65 169 90 onneting end for flt nd round duts Supply nd exhust ventiltion of vrious premises.

26 FLAT PVC UCTWORK SYSTEM T-joint for flt duts Formtion of rnh onnetions in supply or exhust ventiltion systems loted in residentil, puli nd other uildings. Connetion of sme sized flt duts nd integrtion into omplex ventiltion systems. Mde of white plsti. Connetion of sme sized three flt duts t 90. Conneting sizes: 55x100, 60x122, 60x204 mm. iret onnetion to mthing sized duts. с х х х204 Flt dut holder Supply nd exhust ventiltion of vrious premises. Mounting of flt duts to wll, eiling or ny other plne surfe. Mde of white plsti. Fixtion to plne surfe with srews. Speilly designed onfigurtion provides relile dut to holder fixtion nd quik dismntling. Conneting sizes: 55x100, 60x122, 60x204 mm onneting end for flt nd round duts Supply nd exhust ventiltion of vrious premises. Connetion of flt nd round duts t 90. Mde of white plsti. Conneting dimensions: 55x , 60x , 60x , 60x , 60x mm. Flt duts hve diret onnetion nd round duts re onneted through mthing onnetor. 1 h L х х х х х х х х х х h L VENTS. Flt nd round PVC dutworks Ctlog

FLAT PVC UCTWORK SYSTEM T-joint for flt nd round duts Formtion of rnh onnetions in supply or exhust ventiltion

Conneting dimensions: 55x110-100 mm. iret onnetion to ir dut.

premises. Connetion of flt different sized duts. Mde of white plsti. Conneting dimensions: 55x110-60x204 mm.

Connetion of ir duts to ventiltion shfts. eortion of mounting openings. Mde of white plsti. Srew fixing to wll.

27 FLAT PVC UCTWORK SYSTEM T-joint for flt nd round duts Formtion of rnh onnetions in supply or exhust ventiltion systems loted in residentil, puli nd other uildings. Connetion of flt nd round duts. 1 Mde of white plsti. Conneting dimensions: 55x mm. iret onnetion to ir dut. L х 1 d h L х h d Reduer for flt duts Supply nd exhust ventiltion of vrious premises. Connetion of flt different sized duts. Mde of white plsti. Conneting dimensions: 55x110-60x204 mm х204 55х Wll plte for flt duts Supply nd exhust ventiltion of vrious premises. Connetion of ir duts to ventiltion shfts. eortion of mounting openings. Mde of white plsti. Srew fixing to wll. Conneting sizes: 55x100, 60x122, 60x204 mm. d e E E e d 26 VENTS. Flt nd round PVC dutworks Ctlog

FLAT PVC UCTWORK SYSTEM End grille eortion of supply or exhust vents of puli, residentil nd industril ventiltion systems. Corret ir flow distriution in premises. Wll or eiling mounting.

f d d e f 571 88 137 114 59 73 9 871 93 232 208 64 76 9 e End grille with ir pss regultion eortion of supply or exhust vents of puli, residentil nd industril ventiltion systems.

ethle front prt filittes lening. Modifition with n inset sreen (s) is ville. Mthes with 55x110 nd 60x204 mm ir duts.

28 FLAT PVC UCTWORK SYSTEM End grille eortion of supply or exhust vents of puli, residentil nd industril ventiltion systems. Corret ir flow distriution in premises. Wll or eiling mounting. Mde of white plsti. ethle front prt filittes lening. Modifition with n inset sreen (s) is ville. Conneting dimensions: 55x110 nd 60x204 mm. f d d e f e End grille with ir pss regultion eortion of supply or exhust vents of puli, residentil nd industril ventiltion systems. Corret ir flow distriution in premises. Wll or eiling mounting. Mde of white plsti. Equipped with movle flp for ir pity regultion. Air pss is regulted with tilt wnd. ethle front prt filittes lening. Modifition with n inset sreen (s) is ville. Mthes with 55x110 nd 60x204 mm ir duts. f d e f d e Reduer for flt nd round duts Supply nd exhust ventiltion of vrious premises. Flt to round dut onnetion. Mde of white plsti. Conneting dimensions: 55x mm. iret onnetion of reduer to round nd flt duts. х Ø f а х f VENTS. Flt nd round PVC dutworks Ctlog

FLAT PVC UCTWORK SYSTEM Reduer for flt nd round duts Supply nd exhust ventiltion of vrious premises. Flt to round dut onnetion.

Reduer hs diret onnetion to flt ir duts nd onnetion through onnetor to round duts х Ø f а 1156 58х114 100 62 32 f Wll plte with flnge Supply nd

Srew fixing to wll. Conneting sizes: 60x122 mm.

29 FLAT PVC UCTWORK SYSTEM Reduer for flt nd round duts Supply nd exhust ventiltion of vrious premises. Flt to round dut onnetion. Mde of white plsti. Conneting dimensions: 55x mm. Reduer hs diret onnetion to flt ir duts nd onnetion through onnetor to round duts х Ø f а х f Wll plte with flnge Supply nd exhust ventiltion of vrious premises. Connetion of ir duts to ventiltion shfts. eortion of mounting openings. Mde of white plsti. Srew fixing to wll. Conneting sizes: 60x122 mm. d e E Round to flt onnetor (symmetri) Supply nd exhust ventiltion of vrious premises. Connetion of round nd flt duts. Mde of white plsti. iret onnetion flt dut, onnetion to round dut with onnetor. Conneting duts: x122 mm. 1 Ø Ø 1 e h L e h L 28 VENTS. Flt nd round PVC dutworks Ctlog

30 VENTS reserves the rights to modify ny of its produts fetures, designs, omponents nd speifitions t ny time nd without notie to mintin the development nd qulity of mnuftured goods. 06/2013

Hybrid Relief Valves

Hybrid Relief Valves Hyrid Relief Vlves Crtridge Type Pge Diret Ating Relief, Before Chek 7 Diret Ating Relief, After Chek 7 Pilot Operted, Blned Piston, Ventle, Relief, Before Chek 7 T-8A Pilot Operted, Blned Piston, Ventle,