IN CONTROL 11/05

Transcription

1 MILN-S PNUMTI PROUT GUI MILN-S PNUMTI PROUT GUI IR SRVI UNITS 3500/3550 SRIS SPOOL VLVS 1500/1600 SRIS POPPT VLVS 1750 SRIS LUOSLI IRTIONL ONTROL VLVS 1800 SRIS IRT TING VLVS 1750 SRIS IR SRVI, SPOOL, POPPT, LUOSLI, IRT TING, NILLRIS NILLRY VLVS 4500 SRIS IN ONTROL 11/05

2 3550 ir Service Units ILTR RGULTORS 1/4, 1/, 3/4, NPT (SP) 3550 SRIS 3550 IR PRPRTION SL RLIVING NON RLIVING General escription 316 Stainless Steel combination unit for filtration and pressure regulation of compressed air for the offshore, food, pharmaceutical and allied industries. 316 Stainless Steel throughout. Large flow paths minimise pressure drop. Rolling diaphragm design. Precision adjustment. ilter Unit Large 40 micron standard element with manual or automatic drain for the removal of liquids and solids. Operating Medium Gases, air, inert gas, sweet (natural) and sour gases. Ingress Protection eavy seas/on deck rating. unctional Symbols Self relieving Non relieving Technical ata Ports NPT (SP option available) 1/4", 1/", 3/4" Gauge Ports (SP option available) 1/8" NPT 1/4" NPT (option available) Relief/Vent Port 1/8" NPT (itted with bug screen) Working Temperature mbient temperature -0º to +80º (-4º to +176º) Low temperature version -50º (-58º ) (optional) Maximum Inlet Pressure Manual drain - 0 bar (90 psi) utomatic drain - 17 bar (47 psi) Regulated Pressure 0.50 to bar (7. to 9 psi) 0.50 to 4 bar (7. to 58 psi) onstruction Materials 0.50 to 8 bar (7. to 116 psi) ody/onnet/owl and Internals 0.50 to 1 bar (7. to 174 psi) Stainless Steel ISI 316 S11 Maximum Relief low to N MR-0175 at bar (9psi) secondary pressure 0.5cc/sec (0.03 cu in/sec) 40 Micron 316 Stainless Steel owl Retention apacity (5 & 5 Micron option) lement 1cc (1.8cu ins) luoroelastomer and 316 low capacity Stainless Steel iaphragm and bar (145 psi) inlet pressure, Valve ssembly 6 bar (87 psi) secondary pressure Inconel X750 Valve Spring with 1 bar (14.5 psi) pressure drop 316 Stainless Steel 1/4" L/min (130 SM) 1/" L/min (1 SM) djustment Spring v (Kv) luoroelastomer Seals 1/4" -.4 (34.0) cetal resin, stainless steel and 1/" (63.0) 3/4" (71.0) una N uto drain Preferred Models Model Number escription Weight kg (lbs) low haracteristics onform to ISO6953-:000 Self Relieving RMSV**+ 1/4 NPT ilter regulator, manual drain 1.75 (3.86) RSV**+ 1/4 NPT ilter regulator, automatic drain.05 (4.5) 4RMSV**+ 1/ NPT ilter regulator, manual drain 1.75 (3.86) 4RSV**+ 1/ NPT ilter regulator, automatic drain.05 (4.5) 6RMSV**+ 3/4 NPT ilter regulator, manual drain 1.95 (4.30) 6RSV**+ 3/4 NPT ilter regulator, automatic drain.5 (4.96) Non Relieving Specify model code RN in place of RM for manual drain versions. Specify model code R in place of R for manual drain versions. ** or regulated pressure add code: 0.50 to bar (7. to 9 psi) -code to 4 bar (7. to 58 psi) -code to 8 bar (7. to 116 psi) -code to 1 bar (7. to 174 psi) - code 1 + or 5 micron element add 05 to model number or SP replace in position 9 with 1 or 1/4 gauge port add X to end of model number IN ONTROL 11/05

3 3550 ir Service Units ILTR RGULTORS 1/4, 1/, 3/4, NPT (SP) 3550 SRIS SL RLIVING NON RLIVING INSTLLTION IMNSIONS mm (inches) ilter Regulators - Self Relieving and Non Relieving with Manual rain RMSV** 4RMSV** 6RMSV** 8 Mounting holes ø Optional Plastic andwheel Relief/Vent port R Gauge ports G 8 ap screws øk øl ilter Regulators - Self Relieving and Non Relieving with uto rain RSV** 4RSV** 6RSV** 8 Mounting holes ø Optional Plastic andwheel Relief/Vent port R Gauge ports G 8 ap screws øk øl 3550 IR PRPRTION ports P ports P J J Model Number Ports P Ports G Port R J K L With manual drain RMSV** 1/4 NPT 1/8 NPT 1/8 NPT M /4 NPT 1/8 NPT 1/8 NPT (4.86) (4.09) (.17) (.64) (0.94) M4 (6.) RMSV** 1/ NPT 1/8 NPT 1/8 NPT M / NPT 1/8 NPT 1/8 NPT (4.86) (4.09) (.17) (.64) (1.) M5 (6.) RMSV** 3/4 NPT 1/8 NPT 1/8 NPT M5 30 3/4 NPT 1/8 NPT 1/8 NPT (4.86) (4.09) (.17) - (1.) - (6.) (4.61) M5 (1.18) With automatic drain RSV** 1/4 NPT 1/8 NPT 1/8 NPT M /4 NPT 1/8 NPT 1/8 NPT (4.86) (4.09) (.17) (.64) (0.94) M4 (6.) RSV** 1/ NPT 1/8 NPT 1/8 NPT M / NPT 1/8 NPT 1/8 NPT (4.86) (4.09) (.17) (.64) (1.) M5 (6.) RSV** 3/4 NPT 1/8 NPT 1/8 NPT M5 30 3/4 NPT 1/8 NPT 1/8 NPT (4.86) (4.09) (.17) - (1.) - (6.) (4.61) M5 (1.18) imensions for non relieving models are same as self relieving models above. imension = clearance required below pipe centerline to enable bowl removal. or optional handwheel, tamper proof cap, gauges and mounting accessories see details on page IN ONTROL 11/05

4 3550 ilters 1/4, 1/, 3/4, NPT (SP) 3550 SRIS 3550 IR PRPRTION General escription 316 Stainless Steel filter for filtration of compressed air in the offshore, food, pharmaceutical and allied industries. Large 40 micron standard element with manual or automatic drain for the removal of liquids and solids 316 Stainless Steel throughout. Large flow paths minimise pressure drop. Large stainless steel element. Operating Medium Gases, air, inert gas, sweet (natural) and sour gases. Ingress Protection eavy seas/on deck rating unctional Symbols ilter with manual drain ilter with automatic drain Technical ata Ports NPT (SP option available) 1/4", 1/", 3/4" Gauge Ports (SP option available) 1/8" NPT 1/4" NPT (option available) utomatic rain Port 1/8" NPT Working Pressure Manual drain 0 bar (90 psi) utomatic drain 17 bar (47 psi) Working Temperature mbient temperature -0º to +80º (-4º to +176º) Low temperature version -50º (-58º ) (optional) owl retention capacity 1cc (1.8 cu ins) low apacity t 7 bar ( psi) supply pressure, 0.35 bar (5 psi) pressure drop 1/4" L/min (49 SM) 1/" L/min (4 SM) v (Kv) 1/4" -.4 (34.0) 1/" (63.0) 3/4" (71.0) onstruction Materials ody/onnet/owl and Internals Stainless Steel ISI 316 S11 to N MR micron 316 Stainlesss steel (5 and 5 micron option) element luoroelastomer Seals Preferred Models Model Number escription Weight kg (lbs) LMSV0+ 1/4 NPT ilter with manual drain 1.30 (.86) LSV17+ 1/4 NPT ilter with automatic drain 1.60 (3.53) 4LMSV0+ 1/ NPT ilter with manual drain 1.30 (.86) 4LSV17+ 1/ NPT ilter with automatic drain 1.60 (3.53) 6LMSV0+ 3/4 NPT ilter with manual drain 1.50 (3.31) 6LSV17+ 3/4 NPT ilter with automatic drain 1.80 (3.97) + or 5 micron element add 05 to model number + or 5 micron element add 5 to model number or SP replace in position 9 with 1 or 1/4 gauge port add X to end of model number low haracteristics onform to ISO6953-:000 1/4 & 1/ ILTR SS 433 & SS33 ILTRS ir low Rate dm 3 /s, NR IN ONTROL 11/05

5 3550 ilters INSTLLTION IMNSIONS 1/4, 1/, 3/4, NPT (SP) 1500 SRIS INSTLLTION IMNSIONS mm (inches) ilters with Manual rain LMSV0 4LMSV0 6LMSV0 J øl ilters with utomatic rain LSV17 4LSV17 6LSV PNUMTI VLVS øl øl Model Number Ports P Ports G J K L With manual drain LMSV0 1/4 NPT 1/8 NPT M /4 NPT 1/8 NPT (1.1) (4.09) (.17) (.64) (0.94) M4 (6.) LMSV0 1/ NPT 1/8 NPT M / NPT 1/8 NPT (1.1) (4.09) (.17) (.64) (1.) M5 (6.) LMSV0 3/4 NPT 1/8 NPT M5 30 3/4 NPT 1/8 NPT (1.1) (4.09) (.17) - (.64) - (6.) (4.61) M5 (1.18) With automatic drain LSV17 1/4 NPT 1/8 NPT M /4 NPT 1/8 NPT (1.1) (6.47) (.17) (.64) (0.94) M4 (8.48) LSV17 1/ NPT 1/8 NPT M / NPT 1/8 NPT (1.1) (6.47) (.17) (.64) (1.) M5 (8.48) LSV17 3/4 NPT 1/8 NPT M5 30 3/4 NPT 1/8 NPT (1.1) (6.47) (.17) - (1.) - (8.48) (4.61) M5 (1.18) imension = clearance required below pipe centerline to enable bowl removal. or mounting accessories see details on page IN ONTROL 11/05

6 3550 ir Service Units PRSSUR RGULTORS 1/4, 1/, 3/4, NPT (SP) 3550 SRIS 3550 IR PRPRTION SL RLIVING NON RLIVING General escription 316 Stainless Steel pressure regulator for pressure regulation of compressed gases for the offshore, food, pharmaceutical and allied industries. 316 Stainless Steel throughout. Large flow characteristics. Rolling diaphragm design. igh relief flow. Precision adjustment. ull range of accessories Operating Medium Gases, air, inert gas, sweet (natural) and sour gases. Ingress Protection eavy seas/on deck rating unctional Symbols Self relieving Non relieving Technical ata Ports NPT (SP option available) 1/4", 1/", 3/4" Gauge Ports (SP option available) 1/8" NPT 1/4" NPT (option available) Relief/Vent Port 1/8" NPT (itted with bug screen) Maximum Inlet Pressure 0 bar (90 psi) Regulated Pressure 0.50 to bar (7. to 9 psi) 0.50 to 4 bar (7. to 58 psi) 0.50 to 8 bar (7. to 116 psi) 0.50 to 1 bar (7. to 174 psi) Maximum Relief low at bar (9psi) secondary pressure 0.5cc/sec (0.03 cu in/sec) Working Temperature mbient temperature -0º to +80º (-4º to +176º) Low temperature version -50º (-58º ) (optional) contact customer services for details low apacity bar (145 psi) inlet pressure, 6 bar (87 psi) secondary pressure with 1 bar (14.5 psi) pressure drop 1/4" L/min (130 SM) 1/" L/min (1 SM) v (Kv) 1/4" -.4 (34.0) 1/" (65.5) 3/4" - 5. (74.0) onstruction Materials ody/onnet/owl and Internals Stainless Steel ISI 316 S11 to N MR luoroelastomer and 316 Stainless Steel iaphragm and Valve ssembly Inconel X750 Valve spring luoroelastomer Seals 316 Stainless Steel djustment Spring Preferred Models Model Number escription Weight kg (lbs) Self Relieving PRVSV** 1/4 NPT Pressure Regulator 1.60 (3.53) 4PRVSV** 1/ NPT Pressure Regulator 1.60 (3.53) 6PRVSV** 3/4 NPT Pressure Regulator 1.80 (3.97) Non Relieving PRNSV** 1/4 NPT Pressure Regulator 1.60 (3.53) 4PRNSV** 1/ NPT Pressure Regulator 1.60 (3.53) 6PRNSV** 3/4 NPT Pressure Regulator 1.80 (3.97) low haracteristics onform to ISO6953-:000 ** or regulated pressure add code: 0.50 to bar (7. to 9 psi) -code to 4 bar (7. to 58 psi) -code to 8 bar (7. to 116 psi) -code to 1 bar (7. to 116 psi) -code 1 - or SP replace in position 9 with 1 or 1/4 gauge port add X to end of model number IN ONTROL 11/05

7 3550 ir Service Units PRSSUR RGULTORS 1/4, 1/, 3/4, NPT (SP) 3550 SRIS SL RLIVING NON RLIVING INSTLLTION IMNSIONS mm (inches) Pressure Regulators - Self Relieving and Non Relieving PRVSV** 4PRVSV** 6PRVSV** PRNSV** 4PRNSV** 6PRNSV** 8 Mounting holes ø ports P Optional Plastic andwheel Relief/Vent port R Gauge ports G 8 ap screws øk øl 3550 IR PRPRTION J Model Number Ports P Ports G Port R J K L PRVSV** 1/4 NPT 1/8 NPT 1/8 NPT M /4 NPT 1/8 NPT 1/8 NPT (4.86) (.5) (.17) (.64) (0.94) M PRVSV** 1/ NPT 1/8 NPT 1/8 NPT M / NPT 1/8 NPT 1/8 NPT (4.86) (.5) (.17) (.64) (1.) M PRVSV** 3/4 NPT 1/8 NPT 1/8 NPT M5 30 3/4 NPT 1/8 NPT 1/8 NPT (4.86) (.5) (.17) - (1.) - (4.61) M5 (1.18) imensions for non relieving models are same as self relieving models above. SSORIS Mounting racket Stud Mounting Kit Plastic andwheel Kit Mounting bracket kit complete with fixing screws SS1-7S (for 1/4 units-short) SS1-7 (for 1/4 units-long) Mounting Slots L wide x M long K ø Stud mounting kit SS (0.4) a/f 1/8 SP 38 (1.50) 38 (1.18) M8 Plastic handwheel kit SS38-3 ø44 (1.73) SS41-7 (for 1/ and 3/4 units) J 4 Mounting oles ø 4 (0.16) Panel Thickness Model Number SS1-7S 79(3.11) 0(3.94) 5(0.98) 60(.36) 4(0.94) SS1-7 95(3.74) 0(3.94) 5(0.98) 76(.99) 4(0.94) SS (3.74) 0(3.94) 5(0.98) 76(.99) 8(1.) J K 14(0.55) 80(3.15) 14(0.55) 80(3.15) 14(0.55) 80(3.15) Pressure Gauge 50mm pressure gauge - glycerine filled SS153N/11GLY (0-11 bar) SS153N/4GLY(0-4 bar) Thread 1/8 NPT 47.5 (1.87) ø50 (1.97) SS153N/GLY(0- bar) SS153N/16GLY(0-16 bar) IN ONTROL 11/05

8 3500 ir Service Units IG LOW IR SRVI QUIPMNT 3/4, 1, NPT (SP) 3500 SRIS 3500 IR PRPRTION TNIL T General escription full range of 316 Stainless Steel large flow air service unit for the offshore, food, pharmaceutical and allied industries. 316 Stainless Steel throughout. Large flow paths minimise pressure drop. lean lines. Integral mounting holes. Operating Medium Gases, air, inert gas, sweet (natural) and sour gases. Ingress Protection eavy seas/on deck rating unctional Symbols ilters ilter with manual drain Regulators Self relieving ilter/regulators Self relieving with manual drain Self relieving with automatic drain ilter with automatic drain Non relieving Non relieving with manual drain Non relieving with automatic drain Technical ata Ports NPT (SP option available) 3/4", 1 Gauge ports (SP option available) 1/8 NPT 1/4" NPT (option available) Relief/Vent Port 1/8" NPT (itted with bug screen) Working Temperature mbient Temperature -0º to +80º (-4º to +176º) iltration 5 micron Working Pressure ilters and ilter regulators Manual drain 0 bar (90 psi) utomatic drain 17 bar (47 psi) Regulators maximum inlet pressure 0 bar (90 psi) owl Retention 60cc (15.87cu ins) Regulated Pressure 0.1 to bar (1.45 to 9 psi) 0. to 4 bar (.90 to 58 psi) 0.3 to 7 bar (4.35 to psi) 0.5 to bar (7.5 to 145 psi) 0.8 to 16 bar (11.60 to 3 psi) Maximum Relief low at bar (9 psi) secondary pressure 0.5 cc/sec (0.03cu in/sec) low apacity ilter at 7 bar ( psi) supply pressure, 0.35 bar (5psi) pressure drop 00 L/min (353 SM) Regulator at 7 bar ( psi) inlet pressure, 6 bar (87 psi) secondary pressure, 1 bar (14.5 psi) pressure drop 7800 L/min (74 SM) ilter Regulator at 7 bar ( psi) inlet pressure, 6 bar (87 psi) secondary pressure, 1 bar (14.5 psi) pressure drop 7800 L/min (74 SM) v (Kv) 3/4" (117) 1" () onstruction Materials ody/onnet/owl and Internals Stainless Steel ISI 316 S11 to N MR Sintered Polypropylene lement Nitrile and 316 Stainless Steel iaphragm Iconel X750 Valve Spring 316 Stainless Steel djustment spring luoroelastomer Seals and Valve ssembly low haracteristics onform to ISO6953-:000 or filter pressure drops characteristics see graphs on page or pressure regulator characteristics see graphs on page IN ONTROL 11/05

9 3500 ir Service Units ILTR RGULTORS 3/4, 1, NPT (SP) 3500 SRIS SL RLIVING NON RLIVING General escription 316 Stainless Steel combination unit for filtration and pressure regulation of compressed air for the offshore, petrochemical, pharmaceutical and allied industries. Large flow paths minimise pressure drop. 5 micron element. 5 pressure ranges. Preferred Models Operating Medium, Ingress Protection unctional Symbols, Technical ata and onstruction Materials. See details on page low haracteristics or filter pressure drop characteristics see graphs on page or pressure regulator characteristics see graphs on page Model Number escription Weight kg (lbs) Self Relieving 6RMSV** 3/4 NPT ilter with manual drain 5.75 (1.7) 6RSV** 3/4 NPT ilter with automatic drain 5.75 (1.7) 8RMSV** 1 NPT ilter with manual drain 5.75 (1.7) 8RMSV** 1 NPT ilter with automatic drain 5.75 (1.7) Non Relieving Specify model code RN in place of RM for manual drain versions. Specify model code R in place of R for automatic drain versions. ** or regulated pressure add code: 0.1 to bar (1.45 to 9 psi) -code 0 0. to 4 bar (.90 to 58 psi) -code to 7 bar (4.35 to psi) -code to bar (7.5 to 145 psi) -code 0.8 to 16 bar (11.60 to 3 psi) -code 16 - or SP replace in position 9 with 1 - or 1/4 gauge port add X to end of model number 3500 IR PRPRTION INSTLLTION IMNSIONS mm (inches) ilter Regulators with Manual rain 6RMSV**, 8RMSV**, 6RNSV**, 8RNSV** sq Relief port 1/8 NPT (breather fitted) K ilter Regulators with utomatic rain 6RSV**, 8RSV**, 6RSV**, 8RSV** sq K Mounting rackets Stand-pipe Mounting Kit SS638-8 Pressure Gauge Relief port 1/8 NPT (breather fitted) Mounting holes øl x M deep (both sides) Relief port 1/8 NPT (breather fitted) Mounting holes øl x M deep (both sides) 50mm Pressure guage - glycerine filled SS153N/11GLY (0-11 bar) SS153N/4GLY (0-4 bar) SS153N/GLY (0 - bar) SS153N/16GLY (0-16 bar) or dimensional details see page ports P M NM M NM Sight glass (can be positioned at 90º intervals) rain port M5 rain port M5 Sight glass (can be positioned at 90º intervals) Model Number Ports P Ports G M K L M N NM 6RMSV** 3/4 NPT 1/8 NPT M /4 NPT 1/8 NPT (8.6) (6.85) (7.91) (7.09) (3.44) (4.7) (.05) (0.85) (.76) M8 (0.47) (11.06) (.4) 8RMSV** 1 NPT 1/8 NPT M NPT 1/8 NPT (8.6) (6.85) (7.91) (7.09) (3.44) (4.7) (.05) (0.85) (.76) M8 (0.47) (11.06) (.4) imension N or NM = clearance required below pipe centreline to enable bowl to be removed. imensions for non relieving models (6RNSV**, 8RNSV**, 6RSV** and 8RSY**) are same as self relieving models above. = imensions and N relate to models with automatc drain (6RNSV**, 8RSV**, 6RSV** and 8RSV**) IN ONTROL 11/05

10 3500 ir Service Units ILTRS 3/4, 1, NPT (SP) 3500 SRIS 3500 IR PRPRTION MNUL RIN UTOMTI RIN General escription 316 stainless steel compressed air filters to provide clean dry air for the offshore, petro-chemical and allied industries. 5 micron element. Manual / auto drain. Large flow paths minimise pressure drop. unctional symbols, Technical data and onstruction Materials See details on page Preferred Models Model Number escription Weight kg (lbs) 6LMSV0 3/4" NPT ilter with manual drain 3.75 (8.7) 6LSV17 3/4" NPT ilter with automatic drain 3.75 (8.7) 8LMSV0 1" NPT ilter with manual drain 3.75 (8.7) 8LSV17 1" NPT ilter with automatic drain 3.75 (8.7) INSTLLTION IMNSIONS mm (inches) ilters with Manual rain ilters with utomatic rain Mounting rackets 6LMSV0,8LMSV0 sq Mounting holes øl x M deep (both sides) K 6LSV17, 8LSV17 sq Mounting holes øl x M deep (both sides) K Stand-pipe mounting kit SS (0.4) 89 (3.50) x M8 mounting bolts M ports P ports P 79 (3.11) NM N Stand-pipe rain port 1/8" NPT Sight glass (can be positioned at 90º intervals) Model Number Ports P Ports G K L M With manual drain 6LMSV0 3/4" NPT M /4" NPT - (7.09) (3.44) (4.7) (.05) (1.0) (.76) M8 (0.47) - (.4) 8LMSV0 1" NPT M " NPT - (7.09) (3.44) (4.7) (.05) (1.0) (.76) M8 (0.47) - (.4) With automatic drain rain port 1/8" NPT Sight glass (can be positioned at 90º intervals) 6LSV17 3/4" NPT M /4" NPT (7.91) - (3.44) (4.7) (.05) (1.0) (.76) M8 (0.47) (11.06) 8LSV17 1" NPT M " NPT (7.91) - (3.44) (4.7) (.05) (1.0) (.76) M8 (0.47) (11.06) IN ONTROL 11/05

11 3500 ir Service Units PRSSUR RGULTORS 3/4, 1, NPT (SP) SL RLIVING NON RLIVING General escription 316 Stainless Steel unit for pressure regulation of compressed air in the offshore, petrochemical, and allied industries. Large flow 4 pressure ranges. igh relief flow. Operating Medium, Ingress Protection, unctional Symbols, Technical ata and onstruction Materials. See details on page Preferred Models Model Number escription Weight kg (lbs) Self Relieving 6PRVSV** 3/4 NPT Pressure regulator 5.00 (11.0) 8PRVSV** 1 NPT Pressure regulator 5.00 (11.0) Non Relieving ** or regulated pressure add code: 0.1 to bar (1.45 to 9 psi) -code 0 0. to 4 bar (.90 to 58 psi) -code to 7 bar (4.35 to psi) -code to bar (7.5 to 145 psi) -code 0.8 to 16 bar (11.60 to 3 psi) -code 16 6PRNSV** 3/4 NPT Pressure regulator 5.00 (11.0) 8PRNSV** 1 NPT Pressure regulator 5.00 (11.0) for SP replace in position 9 with 1 Models available with NSI flanges - ontact customer service for further details SRIS low haracteristics Secondary pressure vs. low onforms to ISO6953-: IR PRPRTION INSTLLTION IMNSIONS mm (inches) Pressure Regulators - Self Relieving and Non Relieving sq Relief port 1/8 NPT (breather fitted) ports P Gauge ports G Mounting holes øl x M deep (both sides) K Pressure Gauge 50mm pressure gauge - glycerine filled SS153N/11GLY (0-11 bar) SS153N/4GLY(0-4 bar) SS153N/GLY(0- bar) SS153N/16GLY(0-16 bar) Thread 1/8 NPT 47.5 (1.87) ø50 (1.97) Other ranges of pressure gauge are available - details upon request Model Number Ports P Ports G K L M 6PRVSV** 3/4 NPT 1/8 NPT M8 1 3/4 NPT 1/8 NPT (8.6) (6.85) (.09) (3.44) (3.44) (0.85) (.76) M8 (0.47) 8PRVSV** 1 NPT 1/8 NPT M8 1 1 NPT 1/8 NPT (8.6) (6.85) (.09) (3.44) (3.44) (0.85) (.76) M8 (0.47) imensions for non relieving models (6RNSV**, 8RNSV**) are same as self relieving models above IN ONTROL 11/05

12 3500 Lubricator 1/" NPT 3500 SRIS 3500 IR PRPRTION General escription 316 stainless steel for the offshore, food, pharmaceutical and allied industries. Provides lubrication of compressed air for use in these industries. ccurate drip rate adjustment. an be filled under pressure. Transparent sight feed dome gives clear visibility of oil supply. uilt in flow sensor automatically adjusts lubrication delivery to meet wide air flow demand. unctional Symbols Technical data Ports NPT (SP option available) 1/" Working temperature mbient temperature -0º to +80º (-4º to +176º) Working pressure 17 bar (47 psi) apacity 380cc (3.cu in) onstruction Materials odystainless steel ISI 316 S11to N MR-0175 owl 316 Stainless steel low and sight glass cryl Seals Nitrile and luoroelastomer Preferred Models Model Number escription Weight kg (lbs) Self Relieving 4LUSN17 1/" NPT Lubricator 1.80 (3.97) INSTLLTION IMNSIONS mm (inches) 4LUSN17 K Sight dome for oil drip G J Mounting holes øm Gauge ports G L ilter plug Tagging hole Ports P Sight glass for oil level Model Number Ports P G J K M 4LUSN17 1/" NPT /" NPT (6.14) (.05) (3.35) (3.15) (0.79) (1.0) (6.89) (.17) (0.75) (0.55) (0.39) (0.6) IN ONTROL 11/05

13 1500 Spool Valves SPOOL VLVS 1/4, 3/, 5/, NPT (SP) PILOT SOLNOI OPRT General escription range of compact 3/ and 5/ pilot solenoid operated spool valves in Stainless Steel for use on gases. azardous area solenoids losed centre TX, UL, S pproved xd, NM 7&9 Lightweight Operating Medium iltered non-lubricated air, inert gas, sweet (natural) gases. unctional Symbols 3/ Normally losed 3/ Normally Open 3/ iverter 3/ hangeover 5/ Technical ata Ports 1/4" NPT (SP option available) Working Temperature Valve version -0º to +180º (-4º to +356º) Solenoid version -0º to +65º (-4º to +149º) Low temperature version -50º (-58º ) (optional) Working Pressure Single solenoid valve 3 to 1 bar (45 to 174 psi) ouble solenoid valves to 1 bar (30 to 174 psi) Minimum Pilot Pressure t 6.3 bar (90 psi) body pressure Pilot return 1.5 bar ( psi) Maximum low 6.3 bar (87 psi), 1 bar (14.5 psi) differential 3/ valves - 00 L/min (35.3 SM) 5/ valves - 0 L/min (4.4 SM) v (Kv) 3/ valves (15) 5/ valves - 1. (17) 1500 SRIS onstruction Materials Stainless Steel ISI 316L to N MR-0175 ody Stainless Steel ISI 316L to N MR Spool 316 Stainless Steel Spring luoroelastomer Seals Solenoid (refer to solenoid specifications) Instrument Signals Valves with side mounted solenoids can be supplied to operate on instrument signals, typically 0 to 1.5 bar (0 to 1 psi). separate supply to this pilot solenoid is necessary. This supply is bar (30 psi) minimum for the double pilot and 3 bar (45 psi) minimum for the single pilot PNUMTI VLVS MOL OS 3/ Valves 36 VR Type = i stable M = mono stable 5/ Valves Operator (L or Top) 1 = ir = Spring 3 = Side solenoid Operator (R or ottom) 3 = Side solenoid 56 VR Type = i stable M = mono stable Operator (L or Top) 1 = ir = Spring 3 = Side solenoid Operator (R or ottom) 3 = Side solenoid 6 ccessories - = None = Latch Lock, Manual reset 8 = Reverse Latch Lock, Manual reset 6 ccessories = None = Latch Lock, Manual reset 8 = Reverse Latch Lock, Manual reset Voltage odes = 4v = 48 V M = 1v 50/60z S = 0/30v 50/60z Solenoid Type L = NM 7 & 9 P = xme II T4/T6 T = xia II T6 4 = IP65 = exd K = exd Voltage odes = 4v = 48 V Solenoid Type L = NM 7 & 9 = exd K = xd M = 1v 50/60z S = 0/30v 50/60z P = xme II T4/T6 T = xia II T6 4 = IP IN ONTROL 11/05

14 1500 Spool Valves SPOOL VLVS 1/4, 3/, 5/, NPT (SP) 1500 SRIS 1500 PNUMTI VLVS PILOT SOLNOI OPRT SOLNOI MOL OS Model Safety Protection and pproved Ingress Weight ode Rating ousing Material rea Protection kg (lbs) xd II T5 lameproof, ast Iron Zones 1 & IP (.86) L NM 7 & 9 lameproof, 316 Stainless Steel Preferred Models - 3/ Pilot Solenoid Operated lass I, Groups & lass II, Groups, & G NM (0.65) K xdii T6 lameproof, 316 Stainless Steel Zones 1 and IP (3.57) P me II T4/T5 Increased ncapsulation, Glass Reinforced Polyamid. Zones 1 and IP (1.39) T xia II T6 Intrinsically Safe. Glass Reinforced Polyamid. Zones 0 IP (1.17) 4 IP65 Solenoid Not pproved IP (0.19) The model code shown appears in the 13th position of the model number. Model Number escription Weight kg (lbs) Symbol 36M3-VR*+ 1/4 NPT 3/ Pilot solenoid operated, spring return 0.56 (1.3) + Sol 36M3VR*+ 1/4 NPT 3/ Pilot solenoid operated, spring return 0.94 (.07) + Sol with latch lock, manual reset 36M38VR*+ 1/4 NPT 3/ Pilot solenoid operated, spring return 0.94 (.07) + Sol with reverse latch lock, manual reset 3613-VR*+ 1/4 NPT 3/ Pilot solenoid operated, pilot air return 0.71 (1.56) + Sol 3633-VR*+ 1/4 NPT 3/ ouble pilot solenoid operated 0.71 (1.56) + Sol Preferred Models - 5/ Pilot Solenoid Operated Model Number escription Weight kg (lbs) Symbol 56M3-VR*+ 1/4 NPT 5/ Pilot solenoid operated, spring return 1.01 (.3) + Sol 56M3VR*+ 1/4 NPT 5/ Pilot solenoid operated, spring return 1.39 (3.06) + Sol with latch lock, manual reset 56M38VR*+ 1/4 NPT 5/ Pilot solenoid operated, spring return 1.43 (3.15) + Sol with reverse latch lock, manual reset 5613-VR*+ 1/4 NPT 5/ Pilot solenoid operated, pilot air return 1.01 (.3) + Sol 5633-VR*+ 1/4 NPT 5/ ouble pilot solenoid operated 1.0 (.5) + Sol + Specify solenoid voltage. Without solenoid fitted, specify Z in position 13 (for Zones 0, 1 and ). * Specify solenoid type. Without solenoid fitted, specify in position 13 (for NM 7 and 9) IN ONTROL 11/05

15 1500 Spool Valves SPOOL VLVS 1/4, 3/, 5/, NPT (SP) 1500 SRIS PILOT SOLNOI OPRT SOLNOI SSMLIS Solenoid code K (xd II T6) G Silencer Solenoid exhaust port SP Solenoid exhaust port SP Solenoid code (xd IIc T5) R G Solenoid code P (x me II T4/T5) Solenoid code T (x ai II T6) Solenoid exhaust port SP G L (NM 7 & 9) Solenoid code 4 (None/hazardous) Solenoid exhaust port SP G Solenoid exhaust port SP 3/ valve base. or basic valve dimensions see page / valve base. or basic valve dimensions see page R G IN plug 1500 PNUMTI VLVS INSTLLTION IMNSIONS mm (inches) Model ode G R SP L 4 (1.65) 41 (1.61) 3 (1.6) 3 (1.6) 18 (0.71) 40 (1.57) 16 (0.63) 1/8 NPT 76 (.99) 41 (1.61) 3 (1.6) 3 (1.6) 5 (0.98) 84 (3.31) 16 (0.63) 1/8 NPT K 1 (4.33) 41 (1.61) 3 (1.6) 3 (1.6) 5 (.05) 58 (.8) 16 (0.63) M8 P & T 71.5 (.81) 41 (1.61) 3 (1.6) 3 (1.6) 5 (0.98) 81 (3.19) 16 (0.63) 1/8 NPT 4 57 (.4) 39 (1.54) 6 (1.0) 1 (0.83) 19.5 (0.77) 50 (1.97) 11 (0.43) 1/8 NPT SOLNOI SPIITIONS Model ode K P T L 4 Type of Protection xd II T6 xd IIc T5 x me II T4/T5 x ia IIc T6 NM 7 & 9 None pproved rea Zones 1 and Zones 1 and Zones 1 and Zone 0 lass I, Groups &, None lass II Groups, & G egree of Protection IP67 IP65 IP66 IP66 NM 4 (IP55) IP65 ousing 316 Stainless Steel erritic, ast Iron Glass reinforced Glass reinforced Stainless Molded alt luminium poxy painted Polyamid Polyamid Steel Plastic poxy coated poxy coated (St St conduit hub) Polyamid oil potted able ntry M0 x 1.5 M0 x 1.5 M0 x 1.5 M0 x 1.5 1/" NPT IN plug (lt cable entry available) 4" leads Power 5W 8W 6W 0.3W 1.8W 9W onsumption 5W 1.8W 9W(holding) Maximum dmissable 85º (185º) 0º (1º) T4 135º (75º) 85º (185º) 160º (30º) N/ Surface Temp T5 0º (1º) Maximum mbient 40º (4º) 40º (4º) T4 75º (167º) 65º (149º) 40º (4º) 55º (131º) Temperature T5 40º (4º) Maximum luid Temp 80º (176º) 75º (167º) 75º (167º) 75º (167º) 5º (1º) 75º (167º) pproved Standard TX TX TX TX UL Listed N/ S ertified N/ ertificate Number SIR03TX1319 0TX6008X 0TX603X 0TX6066X 06894X0000 N/ IN ONTROL 11/05

16 1500 Spool Valves INSTLLTION IMNSIONS 1/4, 3/, 5/, NPT (SP) 1500 SRIS 1500 PNUMTI VLVS PILOT SOLNOI OPRT INSTLLTION IMNSIONS mm (inches) 3/ Pilot Solenoid Operated - Valve ases Spring Return 36M3-VR** Spring Return with Latch Lock 36M3VR** 36M38VR** imensions,, and G as for spring return base Pilot ir Return 3613-VR** Pilot Solenoid Return 3633-VR** Model Number G J K M P PP R S T 36M3-VR** /4 NPT (1.65) (0.16) (1.97) (1.6) (1.0) (0.87) (0.) (0.63) (0.98) (1.61) (1.6) 1/4 NPT M3VR** /4 NPT (1.65) (1.73) (1.97) (1.6) (1.0) (0.87) (0.) (0.63) (0.98) (1.61) (1.6) 1/4 NPT - (1.6) (.5) (0.79) 36M38VR** /4 NPT (1.65) (1.73) (1.97) (1.6) (1.0) (0.87) (0.) (0.63) (0.98) (1.61) (1.6) 1/4 NPT - (1.6) (.5) (0.79) 3613-VR** /4 NPT 1/8 NPT (1.65) (0.94) (1.97) (1.6) (1.0) (0.87) (0.) (0.63) (0.98) (1.61) (1.6) 1/4 NPT 1/8 NPT VR** /4 NPT (1.65) - (1.97) (1.6) (1.0) (0.87) (0.6) (0.63) (0.98) (1.61) (1.6) 1/4 NPT / Pilot Solenoid Operated - Valve ases Spring Return 56M3-VR** Spring Return with Latch Lock 56M3VR** 56M38VR** Pilot ir Return 5613-VR** Pilot Solenoid Return 5633-VR** ody width = N (over dimension ) imensions,, and G as for spring return base Model Number G J K M P PP R S T 56M3-VR** /4 NPT (1.65) (0.16) (.7) (1.6) (0.91) (1.38) (0.) (0.91) (1.36) (1.61) (1.6) 1/4 NPT M3VR** /4 NPT (1.65) (.5) (.7) (1.6) (0.91) (1.38) (0.) (0.91) (1.36) (1.61) (1.6) 1/4 NPT - (1.6) (.5) (0.79) 56M38VR** /4 NPT (1.65) (.5) (.7) (1.6) (0.91) (1.38) (0.) (0.91) (1.36) (1.61) (1.6) 1/4 NPT - (1.6) (.5) (0.79) 5613-VR** /4 NPT 1/8 NPT (1.65) (0.94) (.7) (1.6) (0.91) (1.38) (0.) (0.91) (1.36) (1.61) (1.6) 1/4 NPT 1/8 NPT VR** /4 NPT (1.65) - (.7) (1.6) (0.91) (1.38) (0.6) (0.91) (1.36) (1.61) (1.6) 1/4 NPT IN ONTROL 11/05

17 1500 irect cting Valves IRT TING VLVS 1/4, 3/, NPT (SP) 1500 SRIS SOLNOI OPRT General escription irect acting solenoid operated valves in stainless steel for use on gases and liquids. Solenoid options TX, UL, S Operating Medium Gases iltered lubricated or non-lubricated air, inert gas, sweet (natural) gases. Sour gas option available (details on application) Liquids Low pressure hydraulic, mineral oil or water. unctional Symbols 3/ Normally losed 3/ Normally Open Technical ata Ports 1/4" NPT (SP option available) 1/8 NPT exhaust ports Orifice.5mm Working Temperature -0º to +180º (-4º to +356º) Low temperature version -50º (-58º ) (optional) Working Pressure 1 bar (174 psi) Maximum low 6 bar (87 psi), 1 bar (14.5 psi) differential 0 L/min (7.77 SM) v (Kv) 0. (3.4) onstruction Materials Stainless Steel ISI 316L to N MR ody 316 Stainless Steel Spring luoroelastomer Seals 1500 PNUMTI VLVS 1 3 Preferred Models Model Number escription Weight kg (lbs) Symbol 33M3-SU * + 1/4 NPT 3/ irect acting solenoid, spring return 0.8 (0.6) + Sol M3-S- * + Sub base mounted direct acting solenoid, sp return 0.06 (1.13) + Sol * Specify solenoid type, + Specify solenoid voltage INSTLLTION IMNSIONS mm (inches) 3/ irect cting Solenoid, Spring Return Sub ase Mounted irect cting Solenoid, Spring Return 4 Mounting tapped Ports P Mounting holes ø 1 3 G Model Number G P 33M3-SU * + 38 (1.50) 30(1.18) 3(1.6) 1(0.47) (0.87) 15(0.59) (0.87) M4 x 6 deep 1/4 NPT 133M3-S- * + 3(1.6) 14(0.55) 3(1.6) (0.39) 4(0.94) 4(0.94) - 4. (0.16) IN ONTROL 11/05

18 1500 Spool Valves SPOOL VLVS 1/4, 3/, 5/, NPT (SP) 1500 SRIS 1500 PNUMTI VLVS PILOT OPRT General escription range of compact 3/ and 5/ pilot operated spool valves in Stainless Steel for use on gases and liquids ompact 3/ and 5/ versions Meet N standard Stainless Steel internals Operating Medium Gases iltered lubricated or non-lubricated air, inert gas, sweet (natural) gases. Sour gas option available (details on application) unctional Symbols 3/ Normally losed 3/ Normally Open 3/ iverter 3/ hangeover 5/ Technical ata Ports 1/4" NPT (SP option available) 1/8" NPT pilot ports Working Temperature -0º to +180º (-4º to +356º) Low temperature version -50º (-58º ) (optional) Working Pressure (gases & liquids) 1 bar (174 psi) Maximum Minimum Pilot Pressure 6.3 bar (90 psi) body pressure 3/ 5/ Spring Return.3 bar (33 psi) 3.5 bar (51 psi) Pilot Return 1.3 bar (19 psi).3 bar (33 psi) Pilot Servo 0.8 bar (1 psi) 1. bar (17 psi) Pilot Reset 3.0 bar (44 psi) 5.0 bar (7 psi) Maximum low 6.3 bar (87 psi), 1 bar (14.5 psi) differential 3/ valves - 00 L/min (35.3 SM) 5/ valves - 0 L/min (4.4 SM) v (Kv) 3/ valves (15) 5/ valves - 1. (17) onstruction Materials Stainless Steel ISI 316L to N MR ody Stainless Steel ISI 316L to N MR Spool 316 Stainless Steel Spring luoroelastomer Seals Preferred Models Model Number escription Weight kg (lbs) Symbol 36M1-VR 1/4 NPT 3/ Pilot operated, spring return 0.55 (1.1) 36M1VR 1/4 NPT 3/ Pilot operated, spring return 0.93 (.05) with latch lock, manual reset 36M18VR 1/4 NPT 3/ Pilot operated, spring return 0.93 (.05) with reverse latch lock, manual reset 3611-VR 1/4 NPT 3/ Pilot operated, pilot return 0.70 (1.54) 56M1-VR 1/4 NPT 5/ Pilot operated, spring return 1.00 (.0) 56M1VR 1/4 NPT 5/ Pilot operated, pilot return 1.38 (3.04) with latch lock, manual reset 56M18VR 1/4 NPT 5/ Pilot operated, spring return 1.38 (3.04) with reverse latch lock, manual reset 5611-VR 1/4 NPT 5/ Pilot operated, pilot return 1.00 (.0) IN ONTROL 11/05

19 1500 Spool Valves SPOOL VLVS 1/4, 3/, 5/, NPT (SP) 1500 SRIS PILOT OPRT INSTLLTION IMNSIONS mm (inches) 3/ Pilot Operated, Spring or Pilot Return Pilot Operated - Spring Return 36M1-VR 3 mounting holes øg M sq Pilot Operated - Spring Return with latch lock 36M1VR, 36M18VR S ør M sq 1 pilot port PP Pilot Operated - Pilot Return 3611-VR 3 mounting holes øg M sq 1500 PNUMTI VLVS Model Number K L P PP 36M1-VR /4 NPT 1/8 NPT (3.07) (0.94) - - 1/4 NPT 1/8 NPT 3611-VR /4 NPT 1/8 NPT (3.86) (0.94) - - 1/4 NPT 1/8 NPT 36M1VR /4 NPT 1/8 NPT (4.65) (0.94) - - 1/4 NPT 1/8 NPT 36M18VR /4 NPT 1/8 NPT (4.65) (0.94) - - 1/4 NPT 1/8 NPT 5/ Pilot Operated, Spring or Pilot Return Pilot Operated - Spring Return 56M1-VR Pilot Operated - Spring Return with Latch Lock 56M1VR, 56M18VR Pilot Operated - Pilot Return 5611-VR ør 4 S 4 ody depth=m M sq N M sq M M sq N M sq 1 vent port V 3 mounting holes øg ports P 1 vent port V T 5 ports P 1 vent port V 3 mounting holes øg ports P Model Number K L P PP V 56M1-VR /4 NPT 1/8 NPT 1/8 NPT (4.61) (0.94) - - 1/4 NPT 1/8 NPT 1/8 NPT 5611-VR /4 NPT 1/8 NPT - (4.61) (0.94) - - 1/4 NPT 1/8 NPT - 56M1VR /4 NPT 1/8 NPT - (6.18) (0.94) - - 1/4 NPT 1/8 NPT - 56M18VR /4 NPT 1/8 NPT - (6.18) (0.94) - - 1/4 NPT 1/8 NPT IN ONTROL 11/05

20 1500 Spool Valves SPOOL VLVS 1/4, 3/, 5/, NPT (SP) 1500 SRIS 1500 PNUMTI VLVS MNILLY OPRT (ROLLR/LVR, ROLLR, PLUNGR) General escription range of compact 3/ and 5/ spool valves in Stainless Steel for use on gases. losed centre ll 316L ompact Operating Medium Gases iltered non-lubricated air, inert, sweet (natural) gases. unctional Symbols 3/ Normally losed 3/ Normally Open 3/ iverter 3/ hangeover 5/ Technical ata Ports 1/4" NPT (SP option available) Working Temperature -0º to +75º (-4º to +167º) Low temperature version -50º (-58º ) (optional) Working Pressure 1 bar (174 psi) maximum Maximum low 6 bar (87 psi), 1 bar (14.5 psi) differential 3/ valves - 00 L/min (35.3 SM) 5/ valves - 0 L/min (4.4 SM) v (Kv) 3/ valves (15) 5/ valves - 1. (17) Operating orce bar (145 psi) differential 3/ 5/ Roller/lever 35 N (8 lbf) 40 N (9 lbf) Roller 76 N (17 lbf) 89 N (0 lbf) Plunger 76 N (17 lbf) 89 N (0 lbf) onstruction Materials Stainless Steel ISI 316L to N MR ody Stainless Steel ISI 316L to N MR-0175 Spool 316 Stainless Steel Spring luoroelastomer Seals 316 Stainless Steel Roller/Lever Preferred Models Model Number escription Weight kg (lbs) Symbol 36M8-VR 1/4 NPT 3/ Roller/lever operated, spring return 0.55 (1.1) 36MVR 1/4 NPT 3/ Roller operated, spring return 0.48 (1.06) 36M6-VR 1/4 NPT 3/ Plunger operated, spring return 0.46 (1.01) 56M8-VR 1/4 NPT 5/ Roller/lever operated, spring return 1.00 (.0) 56MVR 1/4 NPT 5/ Roller operated, spring return 1.1 (.47) 56M6-VR 1/4 NPT 5/ Plunger operated, spring return 1. (.4) or panel mounted versions of roller operated and plunger operated models, substitute code 5 for - in position 8. (i.e. 36M6-VR becomes 36M65VR, 56MVR becomes 56M5-R, 56M6-VR becomes 56M65 VR) IN ONTROL 11/05

21 1500 Spool Valves SPOOL VLVS 1/4, 3/, 5/, NPT (SP) 1500 SRIS MNILLY OPRT (ROLLR/LVR, ROLLR, PLUNGR) INSTLLTION IMNSIONS mm (inches) 3/ Roller/Lever, Roller, Plunger Operated, Spring Return Roller/Lever Operated 36M6-VR Travel T Travel T = (0.46) to operate, 1.5 (0.49) maximum or basic valve dimensions see 3/ spring return bases on page øl 1 Roller Operated 36M-VR, 36M5VR Model Number K L P R S T V W X PT 36M8-VR /4 NPT (1.85) - (0.79) 1/4 NPT - - (0.49) (0.87) - (1.46) - 36M-VR 50-1/4 NPT (1.97) (0.39) - 1/4 NPT (0.59) (0.41) (0.0) - (0.0) - (0.0) 36M6-VR /4 NPT (1.38) (0.39) (0.51) 1/4 NPT (0.59) - (0.0) (0.0) Panel mounting thread øy is 15/16 dia. x 6 TPI Whit orm. Panel mounted models 36M5VR and 36M65VR are supplied with off locknuts as indicated. X V K R S øy 1 Roller width W 3 Travel T Maximum Panel Thickness PT Plunger Operated 36M6-VR, 36M65VR K R øl 1 øy 3 Travel T Maximum Panel Thickness PT 1500 PNUMTI VLVS 5/ Roller/Lever, Roller, Plunger Operated, Spring Return Roller/Lever Operated 56M8-VR Roller Operated 56M-VR, 56M5VR Plunger Operated 56M6-VR, 56M65VR Travel T øl K R S K R 4 X Roller width W 1 V øy 14 øl 14 øy 5 ports P 15 5 ports P Travel T Maximum Panel Thickness PT 15 5 ports P Travel T Maximum Panel Thickness PT Travel T = 14.5 (0.57) to operate, 15.5 (0.60) maximum or basic valve dimensions see 5/ spring return bases on page Model Number K L P R S T V W X PT 56M8-VR /4 NPT (.00) - (0.79) 1/4 NPT - - (0.60) (0.87) - (1.46) - 56M-VR 50-1/4 NPT (1.97) (0.39) - 1/4 NPT (0.59) (0.41) (0.4) - (0.0) - (0.0) 56M6-VR /4 NPT (1.38) (0.39) (0.51) 1/4 NPT (0.59) - (0.4) (0.0) Panel mounting thread øy is 15/16 dia. x 6 TPI Whit orm. Panel mounted models 56M5VR and 56M65VR are supplied with off locknuts as indicated IN ONTROL 11/05

22 1500 Spool Valves SPOOL VLVS 1/4, 3/, 5/, NPT (SP) 1500 SRIS 1500 PNUMTI VLVS MNULLY OPRT (P) General escription range of compact 3/ and 5/ manually operated spool valves in Stainless Steel for use on gases. Panel mounted option losed centre ompact Operating Medium Gases iltered non-lubricated air, inert, sweet (natural) gases. unctional Symbols 3/ Normally losed 3/ Normally Open 3/ iverter 3/ hangeover 5/ Technical ata Ports 1/4" NPT (SP option available) 1/8" NPT pilot ports Working Temperature -0º to +180º (-4º to +356º) Low temperature version -50º (-58º ) (optional) Working Pressure (gases & liquids) 1 bar (174 psi) Maximum Maximum low 6 bar (87 psi), 1 bar (14.5 psi) differential 3/ valves - 00 L/min (35.3 SM) 5/ valves - 0 L/min (4.4 SM) v (Kv) 3/ valves (15) 5/ valves - 1. (17) Operating orce bar (145 psi) differential 3/ valves 76 N (17 lbf) 5/ valves 89 N (0 lbf) onstruction Materials Stainless Steel ISI 316L to N MR ody Stainless steel ISI 316L to N MR Spool 316 Stainless Steel Spring luoroelastomer Seals Phenolic Resin Pad Preferred Models Model Number escription Weight kg (lbs) Symbol 36M7-VR 1/4 NPT 3/ Pad operated, spring return 0.50 (1.) 3677-VR 1/4 NPT 3/ Pad operated, push - pull 0.61 (1.34) 36773VR 1/4 NPT 3/ Pad operated, push - pull with detent 0.63 (1.39) 3617-VR 1/4 NPT 3/ Pad operated, pilot air return 0.63 (1.39) 56M7-VR 1/4 NPT 5/ Pad operated, spring return 0.95 (.09) 5677-VR 1/4 NPT 5/ Pad operated, push - pull 0.93 (.05) 56773VR 1/4 NPT 5/ Pad operated, push - pull with detent 0.95 (.09) 5617-VR 1/4 NPT 5/ Pad operated, pilot air return 0.95 (.09) IN ONTROL 11/05

23 1500 Spool Valves SPOOL VLVS 1/4, 3/, 5/, NPT (SP) 1500 SRIS MNULLY OPRT P INSTLLTION IMNSIONS mm (inches) 3/ Pad Operated, Spring Return Pad Operated 36M7-VR, 36M75VR 1 or basic valve dimensions, see 3/ spring return bases on page K R øy 1 øl Travel T Maximum Panel Thickness PT 3/ Pad Operated (Push-Pull) 3/ Pad Operated, Pilot ir Return Pad Operated (Push-Pull) 3677VR, 36M775VR Pad Operated (Push-Pull) 36773VR Pad Operated, Pilot ir Return 3617VR, 36175VR 1 or basic valve dimensions, see 3/ spring return bases on page K R øy 1 øl Travel T Maximum Panel Thickness PT 1500 PNUMTI VLVS Model Number K L P R T PT 36M7-VR /4 NPT (.36) (0.39) (1.50) 1/4 NPT (0.59) (0.0) (0.0) 3677-VR /4 NPT (.36) (0.39) (1.50) 1/4 NPT (0.59) (0.0) (0.0) 36773VR /4 NPT (.36) (0.39) (1.50) 1/4 NPT (0.59) (0.0) (0.0) 3617-VR /4 NPT (.36) (0.39) (1.50) 1/4 NPT (0.59) (0.0) (0.0) Panel mounting thread øy is 15/16 dia. x 6 TPI Whit orm. Panel mounted models 36M75VR, 36775VR and 36175VR are supplied with off locknuts as indicated. 5/ Pad Operated, Spring Return, 5/ Pad Operated (Push-Pull), 5/ Pad Operated, Pilot ir Return Pad Operated (Push-Pull) 56M7-VR, 56M75VR Pad Operated (Push-Pull) 5677-VR, 56775VR Pad Operated (Push-Pull) with detent 56773VR Pad Operated, pilot air return 5617-VR, 56175VR K R 4 1 øl øy Travel T Maximum Panel Thickness PT or basic valve dimensions, see 5/ spring return or 5/ pilot return bases on page Model Number K L P R T PT 56M7-VR /4 NPT (.36) (0.39) (1.50) 1/4 NPT (0.59) (0.4) (0.0) 5677-VR /4 NPT (.36) (0.39) (1.50) 1/4 NPT (0.59) (0.4) (0.0) 56773VR /4 NPT (.36) (0.39) (1.50) 1/4 NPT (0.59) (0.4) (0.0) 5617-VR /4 NPT (.36) (0.39) (1.50) 1/4 NPT (0.59) (0.4) (0.0) Panel mounting thread øy is 15/16 dia. x 6 TPI Whit orm. Panel mounted models 56M75VR, 56775VR and 56175VR are supplied with off locknuts as indicated IN ONTROL 11/05

24 1500 PNUMTI VLVS 1500 Spool Valves SPOOL VLVS 1/4, 3/, 5/ NPT (SP) MNULLY OPRT (P) N PILOT OPRT General escription range of compact 3/ and 5/ manually operated spool valves in stainless steel for use on liquids and gases. Panel mounted option losed centre ompact Operating Medium Gases iltered lubricated or non-lubricated air, inert gas, sweet (natural) gases. Sour gas option available. (details on application) Liquids Low pressure hydraulic, mineral oil or water unctional Symbols 3/ Normally losed 3/ Normally Open 3/ iverter 3/ hangeover 5/ Technical ata Ports 1/4" NPT (SP option available) 1/8" NPT pilot ports Working Temperature -0º to +180º (-4º to +356º) Low temperature version -50º (-58º ) (optional) Working Pressure (gases & liquids) 1 bar (174 psi) Maximum Working Pressure (gases and liquids) 1 bar (174 psi) Operating orce bar (145 psi) body pressure 3/ valves 76 N (17 lbf) 5/ valves 89 N (0 lbf) v (Kv) 3/ valves (15) 5/ valves - 1. (17) Maximum low 6 bar (87 psi), 1 bar (14.5 psi) differential 3/ valves - 00 L/min (35.3 SM) 5/ valves - 0 L/min (4.4 SM) 1500 SRIS onstruction Materials Stainless Steel ISI 316L to N MR ody Stainless Steel ISI 316L to N MR Spool 316 Stainless Steel Spring luoroelastomer Seals Phenolic Resin Pad Preferred Models Model Number escription Weight kg (lbs) Symbol 36M-VR 1/4 NPT 3/ Pad or pilot operated, spring return 0.65 (1.54) 56M-VR 1/4 NPT 5/ Pad or pilot operated, spring return 1.00 (.0) These models are supplied with off locknuts for mounting IN ONTROL 11/05

25 1500 Spool Valves SPOOL VLVS 1/4, 3/, NPT (SP) 1500 SRIS MNULLY OPRT (P) N PILOT LT INSTLLTION IMNSIONS mm (inches) 3/ Pad or Pilot Operated, Spring Return 36M-VR S K Signal Port SP 1 3 xternal port P R øl 14 øy Travel T Maximum Panel Thickness PT 1500 PNUMTI VLVS or basic valve dimensions, see 3/ pilot air return bases on page Model Number * K L P R T PT 36M-VR /4 NPT (1.34) (.36) (0.39) (1.50) 1/4 NPT (0.59) (0.0) (0.0) Panel mounting thread øy is 15/16 dia. x 6 TPI Whit orm. Panel mounted model 36M5VR, 56M5VR are supplied with off locknuts for mounting. or above model in rass specify R in position 9 (in place of V ) 5/ Pad or Pilot Operated, Spring Return 56M-VR S Signal Port SP K R L øl xternal port P 1 3 øy Z Z 14 Travel T or basic valve dimensions, see 3/ pilot air return bases on page Model Number * K L P R T PT 56M-VR /4 NPT (1.34) (.36) (0.39) (1.50) 1/4 NPT (0.59) (0.0) (0.0) Panel mounting thread øy is 15/16 dia. x 6 TPI Whit orm. Panel mounted model 36M5VR, 56M5VR are supplied with off locknuts for mounting. or above model in rass specify R in position 9 (in place of V ) IN ONTROL 11/05

26 1500 PNUMTI VLVS 1500 Spool Valves SPOOL VLVS 1/4, 3/, NPT (SP) MNULLY OPRT (P) N PILOT LT INSTLLTION IMNSIONS mm (inches) General escription range of compact 3/ manually operated spool valves in Stainless Steel for use on gases. Mechanical latch Pilot latch Operating Medium Gases iltered non-lubricated, air, inert, sweet (natural) gases. unctional Symbols 3/ Normally losed 3/ Normally Open 3/ iverter 3/ hangeover 5/ Technical ata Ports 1/4" NPT (SP option available) Working Temperature -0º to +180º (-4º to +356º) Low temperature version -50º (-58º ) (optional) Working Pressure (gases and liquids) bar (145 psi) maximum Maximum low 6 bar (87 psi), 1 bar (14.5 psi) differential 3/ valves - 00 L/min (35.3 SM) v (Kv) 3/ valves (15) Operating orce bar (145 psi) body pressure utton Operated 3/ valves - 76 N (17 lbf) 5/ valves - 89 N (0 lbf) onstruction Materials Stainless Steel ISI 316L to N MR ody Stainless Steel ISI 316L to N MR Spool 316 Stainless Steel Spring luoroelastomer Seals 1500 SRIS unction P OPRT, SPRING RTURN WIT PILOT LT If a pilot pressure of 1.5 to bar (1 to 145 psi) is present at pilot ports when the knob is pulled out, the pilot pressure will hold the valve in the operated position against the return spring. If the pilot pressure falls to 0.5 bar (7 psi) or less, the valve will be reset to its unoperated position. The valve cannot be operated by pilot pressure alone, manual operation must take place first. P OPRT, SPRING RTURN WIT PILOT LT N MNUL LT PIN If a pilot pressure of 1.5 to bar (1 to 145 psi) is present at pilot ports when the knob is pulled out, the pilot pressure will hold the valve in the operated position against the return spring. If the pilot pressure falls to to bar (9 to 145 psi) this will simultaneously allow the latch to release whilst holding the valve in the operated position. The valve will reset to its unoperated position. The valve cannot be operated by pilot pressure alone, manual operation must take place first. Preferred Models Model Number escription Weight kg (lbs) Symbol 36M76VR 1/4 NPT 3/ Pad operated, spring return with pilot latch 0.75 (1.65) 36MJVR 1/4 NPT 3/ Pad operated, spring return, pilot latch, manual pin 0.85 (1.87) 36M7VR 1/4 NPT 3/ Pad operated, spring return, pilot latch, manual pin 0.85 (1.87) 36M7VR 1/4 NPT 3/ Pad operated, spring return, pilot latch, manual pin 0.85 (1.87) 56M76VR 1/4 NPT 3/ Pad operated, spring return, pilot latch, manual pin 0.85 (1.87) 56M7JVR 1/4 NPT 3/ Pad operated, spring return, pilot latch, manual pin 0.85 (1.87) 56M7VR 1/4 NPT 3/ Pad operated, spring return, pilot latch, manual pin 0.85 (1.87) 56M7VR 1/4 NPT 3/ Pad operated, spring return, pilot latch, manual pin 0.85 (1.87) IN ONTROL 11/05

27 1500 Spool Valves SPOOL VLVS 1/4, 3/, NPT (SP) 1500 SRIS MNULLY OPRT (P) INSTLLTION IMNSIONS mm (inches) 3/ Pad Operated, Spring Return with Pilot Latch (Visual Indicator Option). 36M76VR (Visual Indicator Option 36M7JVR) S Signal port SP xhaust port P 1 3 K R øy 1 øl Travel T Maximum Panel Thickness PT or basic valve dimensions, see 3/ spring return bases on page Visual Indicator Option Travel T øl 1500 PNUMTI VLVS 3/ Pad Operated, Spring Return with Pilot Latch and Manual Latch Pin (Visual Indicator Option). 36M7VR (Visual Indicator Option 36M7VR) S Signal port SP K R øl 1 L Visual Indicator Option øl xhaust port P 1 3 øy Z Z Travel T Travel T or basic valve dimensions, see 3/ spring return bases on page Model Number S * K L L P SP P R T PT Z Z 36M76VR /4 NPT 1/8 NPT 1/8 NPT (1.77) (1.30) (1.50) (.36) (0.39) (1.50) - 1/4 NPT 1/8 NPT 1/8 NPT (0.59) (0.0) (0.0) M7VR /4 NPT 1/8 NPT 1/8 NPT (1.77) (1.30) (1.50) (.36) (0.39) (1.50) (1.50) 1/4 NPT 1/8 NPT 1/8 NPT (0.59) (0.0) - (0.39) (0.63) 36M7JVR / /4 NPT 1/8 NPT 1/8 NPT (1.77) (1.30) (1.50) (3.50)/(4.13) (0.39) (1.50) (1.50) 1/4 NPT 1/8 NPT 1/8 NPT (0.59) (0.0) - (0.39) (0.63) Panel mounting thread øy is 15/16 dia. x 6 TPI Whit orm. Visual Indicator - Red (Off) / Green (On) * dimension for visual indicator option code J = 89 (3.50), code = 5 (4.13). These models are supplied with off locknuts for mounting IN ONTROL 11/05

28 1500 Spool Valves SPOOL VLVS 1/4, 3/, 5/, NPT (SP) 1500 SRIS 1500 PNUMTI VLVS MNULLY OPRT (UTTON), MNULLY OPRT (KY) General escription range of compact 3/ and 5/ manually operated spool valves in Stainless Steel for use on gases. Unique key ully guarded button losed centre Operating Medium iltered non-lubricated air, inert, sweet (natural) gases. unctional Symbols 3/ Normally losed 3/ Normally Open 3/ iverter 3/ hangeover 5/ Technical ata Ports 1/4" NPT (SP option available) Working Temperature -0º to +180º (-4º to +356º) Working Pressure (gases and liquids) bar (145 psi) maximum Operating orce bar (145 psi) body pressure utton Operated 3/ valves - 76 N (17 lbf) 5/ valves - 89 N (0 lbf) Maximum low 6 bar (87 psi), 1 bar (14.5 psi) differential 3/ valves - 00 L/min (35.3 SM) 5/ valves - 0 L/min (4.4 SM) v (Kv) 3/ valves (15) 5/ valves - 1. (17) onstruction Materials Stainless Steel ISI 316L to N MR ody Stainless Steel ISI 316L to N MR Spool 316 Stainless Steel Spring luoroelastomer Seals Preferred Models Model Number escription Weight kg (lbs) Symbol 36MG-VR 1/4 NPT 3/ utton operated, spring return 0.50 (1.) 36MGGVR 1/4 NPT 3/ Guarded button operated, spring return 0.55 (1.1) 36RR-VR 1/4 NPT 3/ Key operated (positive) (.14) Key removable in unoperated position 36MR-VR 1/4 NPT 3/ Key operated (spring return) (.14) Key removable in unoperated position 36RK-VR 1/4 NPT 3/ Key operated (positive) (.14) Key removable in both positions 56RR-VR 1/4 NPT 5/ Key operated (positive) (3.4) Key removable in unoperated position 56MR-VR 1/4 NPT 5/ Key operated (spring return) (3.4) Key removable in unoperated position 56RK-VR 1/4 NPT 5/ Key operated (positive) (3.4) Key removable in both positions or panel mounted version of model 36MG-VR, substitute code 5 for in position 8. ll other models are supplied with panel mounting facilities IN ONTROL 11/05

29 1500 Spool Valves SPOOL VLVS 1/4, 3/, 5/, NPT (SP) 1500 SRIS MNULLY OPRT (UTTON), MNULLY OPRT (KY) INSTLLTION IMNSIONS mm (inches) 3/ utton Operated, Spring Return 36MG-VR 1 3 Key Operated (Key retained in operated position) 36RR-VR Key Operated, spring return (Key retained in ordered position) 36MR-VR Key Operated (Key removable in both positions) 36RK-VR K R Maximum Panel Thickness PT 36MGGVR Model Number K L P R T PT 36MG-VR /4 NPT (1.) (0.39) (0.79) 1/4 NPT (0.59) (0.0) (0.0) MGGVR /4 NPT (1.) (0.39) (0.79) 1/4 NPT (0.59) (0.0) (0.16) (1.0) (1.) 3/ Key Operated 5/ Key Operated K øl øy 1 Travel T 3/ utton Operated, Spring Return 1 3 Travel T ack nut / hexagon Key Operated (Key retained in operated position) 56RR-VR Key Operated, spring return (Key retained in ordered position) 56MR-VR Key Operated (Key removable in both positions) 56RK-VR KTº K K K R øy ezel nut / hexagon øl 1 Maximum Panel Thickness PT Panel mounting thread øy is 15/16 dia x 6 TPI Whit orm 1500 PNUMTI VLVS K K M sq K or basic valve dimensions see 3/ and 5/ spring return bases on page Model Number P M K K K K KT 36RR-VR 1/4 NPT º 1/4 NPT (1.6) (0.98) (1.14) (1.14) (.60) 90º 36MR-VR 1/4 NPT º 1/4 NPT (1.6) (0.98) (1.14) (1.14) (.60) 60º 36RKVR 1/4 NPT º 1/4 NPT (1.6) (0.98) (1.14) (1.14) (.60) 90º 56RR-VR 1/4 NPT º 1/4 NPT (1.6) (0.98) (1.14) (1.14) (.60) 90º 56MR-VR 1/4 NPT º 1/4 NPT (1.6) (0.98) (1.14) (1.14) (.60) 60º 56RKVR 1/4 NPT º 1/4 NPT (1.6) (0.98) (1.14) (1.14) (.60) 90º IN ONTROL 11/05

30 1500 Spool Valves SPOOL VLVS 1/4, 3/, 5/, NPT (SP) 1500 SRIS 1500 PNUMTI VLVS MNULLY OPRT (SWIT), MNULLY OPRT (LVR) General escription range of compact 3/ and 5/ manually operated spool valves in Stainless Steel for use on gases. Panel mounted switch operated losed centre ompact Operating Medium Gases iltered non-lubricated air, inert, sweet (natural) gases. Liquids Low pressure hydraulic, mineral oil or water. unctional Symbols 3/ Normally losed 3/ Normally Open 3/ iverter 3/ hangeover 5/ Technical ata Ports 1/4" NPT (SP option available) 1/8" NPT vent port Working Temperature -0º to +180º (-4º to +356º) Low temperature version -50º (-58º ) (optional) Working Pressure 1 bar (174 psi) maximum Maximum low 6 bar (87 psi), 1 bar (14.5 psi) differential 3/ valves - 00 L/min (35.3 SM) 5/ valves - 0 L/min (4.4 SM) v (Kv) 3/ valves (15) 5/ valves - 1. (17) Operating orce bar (145 psi) body pressure Switch Operated 3/ valves - 13 N (.9 lbf) 5/ valves - 16 N (3.5 lbf) onstruction Materials Stainless Steel ISI 316L to N MR ody Stainless Steel ISI 316L to N MR Spool 316 Stainless Steel Spring luoroelastomer Seals Preferred Models Model Number escription Weight kg (lbs) Symbol 3600-VR 1/4 NPT 3/ Switch operated, spring return with detent 0.80 (1.76) 36553VR 1/4 NPT 3/ Lever operated, with detent 0.80 (1.76) 36M5-VR 1/4 NPT 3/ Lever operated, spring return 0.65 (1.43) 5600-VR 1/4 NPT 5/ Switch operated, spring return with detent 1. (.43) 56553VR 1/4 NPT 5/ Lever operated, with detent 1. (.43) 56M5-VR 1/4 NPT 5/ Lever operated, spring return 1. (.43) Models 3600-VR and 5600-VR are supplied with off locknuts for mounting IN ONTROL 11/05

31 1500 Spool Valves SPOOL VLVS 1/4, 3/, NPT (SP) 1500 SRIS MNULLY OPRT (SWIT), MNULLY OPRT (LVR) INSTLLTION IMNSIONS mm (inches) 3/ Switch Operated, Spring Return with etent 3600-VR 360-VR K 1 Sº 1 ack nut / hexagon 3 R øy S Travel T Maximum Panel Thickness PT S 1500 PNUMTI VLVS or basic valve dimensions, see 3/ spring return bases on page Model Number K P R PT S S S 3600-VR 61 1/4 NPT º 8 (.40) (0.39) 1/4 NPT (0.39) (1.0) (1.) (0.0) (0.51) 95º (1.) Panel mounting thread øy is 15/16 dia. x 6 TPI Whit orm. 3/ Lever Operated, Spring Return 3/ Lever Operated, with etent 36M5-VR 36553VR 1 øl View port V 1 øl Lº Lº L L or basic valve dimensions, see 3/ spring return and pilot air return bases on page Model Number L L L P V 36M5-VR º 1/4 NPT - (1.6) (1.6) (3.78) 11.3º 1/4 NPT VR º 1/4 NPT 1/8 NPT (1.6) (1.6) (3.78) 11.3º 1/4 NPT 1/8 NPT IN ONTROL 11/05

32 1500 Spool Valves SPOOL VLVS 1/4, 5/, NPT (SP) 1500 SRIS 1500 PNUMTI VLVS MNULLY OPRT (SWIT), MNULLY OPRT (LVR) INSTLLTION IMNSIONS mm (inches) 5/ Switch Operated, Spring Return with etent. 5/ Switch Operated, Spring Return VR 560-VR Vent port V or basic valve dimensions, see 5/ spring return bases on page Model Number K P R PT S S S V 5600-VR 61 1/4 NPT º 8 1/8 NPT (.40) (0.39) 1/4 NPT (0.39) (1.0) (1.) (0.0) (0.51) 95º (1.) 1/8 NPT Panel mounting thread øy is 15/16 dia. x 6 TPI Whit orm. 1 K ports P ack nut / hexagon 4 R S øy 14 Sº ezel nut / hexagon Maximum Panel Thickness PT S 5/ Lever Operated, Spring Return. 5/ Lever Operated, with etent. 56M5-VR 56553VR Vent port V 1 5 ports P 4 14 øl Vent port V 1 5 ports P 4 14 øl Lº Lº L L or basic valve dimensions, see 5/ spring return bases on page Model Number L L L P V 56M5-VR º 1/4 NPT 1/8 NPT (1.6) (1.6) (3.78) 11.3º 1/4 NPT 1/8 NPT 56553VR º 1/4 NPT 1/8 NPT (1.6) (1.6) (3.78) 11.3º 1/4 NPT 1/8 NPT IN ONTROL 11/05

33 1600 Spool Valves SPOOL VLVS 1/, 3/, 5/, NPT (SP) 1600 SRIS PILOT SOLNOI OPRT General escription range of compact 3/ and 5/ pilot solenoid operated spool valves in Stainless Steel for use on gases and liquids. azardous area solenoids. oil with 316 or aluminium housing lock before bleed. TX approved. UL Listed S approvals. Operating Medium Gases iltered non-lubricated air, inert gas, sweet (natural) gases. Sour gas option available (details on application) Liquids Low pressure hydraulic, mineral oil or water. unctional Symbols 3/ Normally losed 3/ Normally Open 3/ iverter 3/ hangeover MOL OS 5/ Technical ata Ports 1/ NPT (SP option available) 1/8" NPT pilot ports Working Pressure (gases & liquids) Single Solenoid Valves 3 to 1 bar (45 to 174 psi) ouble Solenoid Valves to 1 bar (30 to 174 psi) v (Kv) 3/ valves (53) 5/ valves (53) Working Temperature Valve only -0º to +180º (-4º to +356º) Solenoid - mbient temperature -0º to +180º (-4º to +149º) Minimum Pilot Pressure t 6.3 bar (90 psi) body pressure Pilot Return -.0 bar (30.0 psi) Maximum low 6 bar (87 psi), 1 bar (14.5 psi) differential 3/ valves L/min (13 SM) 5/ valves L/min (13 SM) onstruction Materials Stainless Steel ISI 316L to N MR ody Stainless Steel ISI 316L to N MR Spool 316 Stainless Steel Spring luoroelastomer Seals Refer to solenoid specification Instrument Signals Valves with side mounted solenoids can be supplied to operate on instrument signals, typically 0 to 1.5 bar (0 to 1 psi). separate supply to the pilot solenoid is necessary. This supply is bar (30 psi) minimum for the double pilot and 3 bar (45 psi) minimum for the single pilot SPOOL VLVS 3/ Valves S Size = i stable M = Mono stable 5/ Valves Operator (L or Top) 1 = ir = Spring 4 = Side solenoid Operator (R or ottom) 3 = Side solenoid S Size = i stable M = Mono stable Operator (L or Top) 1 = ir = Spring 4 = Side solenoid Operator (R or ottom) 3 = Side solenoid ccessories ody / Seals - = None V = Stainless Steel / = Latch lock, luorelastomer Manual reset 8 = Reverse latch lock, Manual reset ccessories ody / Seals = None V = Stainless Steel / = Latch lock, luorelastomer Manual reset 8 = Reverse latch lock, Manual reset Solenoid Type See solenoid model codes Solenoid Type See solenoid model codes Voltage odes = 1v = 4v M = 1v 50/60z N = v 60z Q = 40v 60z S = 0/30v 50/60z Y = 8v (solenoid type T only) other voltages special order Voltage odes = 1v = 4v M = 1v 50/60z N = v 60z Q = 40v 60z S = 0/30v 50/60z Y = 8v (solenoid type T only) other voltages special order IN ONTROL 11/05

34 1600 Spool Valves SPOOL VLVS 1/, 3/, 5/, NPT (SP) 1600 SRIS 1600 SPOOL VLVS PILOT SOLNOI OPRT SOLNOI MOL OS Model Safety Protection and pproved Ingress Weight ode Rating ousing Material rea Protection kg (lbs) xd II T5 lameproof ast Iron Zones 1 & IP (.86) L NM 7 & 9 lameproof, 3316 Stainless Steel lass I, Groups & lass III Groups, & G NM (0.65) K xdii T6 lameproof, 316 Stainless Steel Zones 1 and IP (3.57) P me II T4/T5 Increased ncapsulation, Glass Reinforced Polyamid. Zones 1 and IP (1.39) T xia II T6 Intrinsically Safe. Glass Reinforced Polyamid. Zones 0 IP (1.17) 4 IP65 Solenoid Not pproved IP (0.19) The model code shown appears in the 13th position of the model number. Preferred models Model Number escription Weight kg (lbs) Symbol 436M3-VS * + 1/" NPT 3/ Pilot solenoid operated, spring return 1.50 (3.31) + Sol 1 436M3VS * + 1/" NPT 3/ Pilot solenoid operated, spring return. (4.63) + Sol with latch lock, manual reset 1 436M38VS * + 1/" NPT 3/ Pilot solenoid operated, spring return. (4.63) + Sol with reverse latch lock, manual reset VS * + 1/" NPT 3/ Pilot solenoid operated, pilot air return 1.60 (3.53) + Sol VS * + 1/" NPT 3/ ouble pilot solenoid operated 1.70 (3.75) + Sol Preferred models Model Number escription Weight kg (lbs) Symbol 456M3-VS * + 1/" NPT 5/ Pilot solenoid operated,spring return. (4.63) + Sol 456M3VS * + 1/" NPT 5/ Pilot solenoid operated,spring return.70 (5.95) + Sol with latch lock, manual reset M38VS * + 1/" NPT 5/ Pilot solenoid operated,spring return.70 (5.95) + Sol with reverse latch lock, manual reset VS * + 1/" NPT 5/ Pilot solenoid operated, pilot air return.0 (4.85) + Sol VS * + 1/" NPT 5/ ouble pilot solenoid operated.30 (5.07) + Sol * Specify solenoid type, + Specify solenoid voltage, Without solenoid fitted specify Z in position 13 (for Zones 0, 1 & ) Without solenoid fitted specify in position 13 (for NM 7 & 9) IN ONTROL 11/05

35 1600 Spool Valves SPOOL VLVS 1/, 3/, 5/, NPT (SP) 1600 SRIS PILOT SOLNOI OPRT 3/ and 5/ Spool Valves Solenoid code K (xd II T6) G Silencer Solenoid exhaust port SP Solenoid exhaust port SP Solenoid code (xd IIc T5) R G Solenoid code P (x me II T4/T5) Solenoid code T (x ai II T6) Solenoid exhaust port SP G L (NM 7 & 9) Solenoid code 4 (None hazardous) Solenoid exhaust port SP G Solenoid exhaust port SP R G IN plug 1600 SPOOL VLVS 3/ valve base. or basic valve dimensions see page / valve base. or basic valve dimensions see page INSTLLTION IMNSIONS mm (inches) Model ode G R SP L 4 (1.65) 41 (1.61) 3 (1.6) 3 (1.6) 18 (0.71) 40 (1.57) 16 (0.63) 1/8 NPT 76 (.99) 41 (1.61) 3 (1.6) 3 (1.6) 5 (0.98) 84 (3.31) 16 (0.63) 1/8 NPT K 1 (4.33) 41 (1.61) 3 (1.6) 3 (1.6) 5 (.05) 58 (.8) 16 (0.63) M8 P & T 71.5 (.81) 41 (1.61) 3 (1.6) 3 (1.6) 5 (0.98) 81 (3.19) 16 (0.63) 1/8 NPT 4 57 (.4) 39 (1.54) 6 (1.0) 1 (0.83) 19.5 (0.77) 50 (1.97) 11 (0.43) 1/8 NPT SOLNOI SPIITIONS Model ode K P T L 4 Type of Protection xd II T6 xd IIc T5 x me II T4/T5 x ia IIc T6 NM 7 & 9 None pproved rea Zones 1 and Zones 1 and Zones 1 and Zone 0 lass I, Groups &, None lass II Groups, & G egree of Protection IP67 IP67 IP66 IP66 NM 4 (IP55) IP65 ousing 316 Stainless Steel erritic, ast Iron Glass reinforced Glass reinforced Stainless Molded alt luminium poxy painted Polyamid Polyamid Steel Plastic poxy coated poxy coated (St St conduit hub) Polyamid oil potted able entry M0 x 1.5 M0 x 1.5 M0 x 1.5 M0 x 1.5 1/" NPT IN plug (lt cable entry available) 4" leads Power 5W 8W 6W 0.3W 1.8W 9W onsumption 5W 1.8W 9W(holding) Maximum dmissable 85º (185º) 0º (1º) T4 135º (75º) 85º (185º) 160º (30º) N/ Surface Temp T5 0º (1º) Maximum mbient 40º (4º) 40º (4º) T4 75º (167º) 65º (149º) 40º (4º) 55º (131º) Temperature T5 40º (4º) Maximum luid Temp 80º (176º) 75º (167º) 75º (167º) 75º (167º) 5º (1º) 75º (167º) pproved Standard TX TX TX TX UL Listed N/ S ertified N/ ertificate Number SIR03TX1319 0TX6008X 0TX603X 0TX6066X 06894X0000 N/ IN ONTROL 11/05

36 1600 Spool Valves SPOOL VLVS 1/, 3/, 5/, NPT (SP) 1600 SRIS 1600 SPOOL VLVS PILOT SOLNOI OPRT INSTLLTION IMNSIONS mm (inches) 3/ Pilot Solenoid Operated - Valve ases Spring Return 436M3-VS** M sq Ø ody Thickness = M J 3 mounting holes øg N Spring Return with Latch Lock 436M3VS** 436M38VS** S ør T imensions,, and G and N as for spring return base J M Pilot ir Return VS** J M sq Ø N ody Thickness = M 3 mounting holes øg Pilot Solenoid Return VS** J ody Thickness = M 3 mounting holes øg N Model Number G J M N P PP R S T 436M3-VS** /" NPT (1.57) (.56) (0.94) (1.77) (1.97) (0.6) (0.77) (1.8) (1.50) (.44) 1/" NPT M3VS** /" NPT (.95) (.56) - (1.77) (1.97) (0.6) (0.77) (1.8) (1.50) (.44) 1/" NPT - (1.6) (3.66) (1.0) 436M38VS** /" NPT (.95) (.56) - (1.77) (1.97) (0.6) (0.77) (1.8) (1.50) (.44) 1/" NPT - (1.6) (3.66) (1.0) VS** /" NPT 1/8" NPT (1.6) (.56) - (1.77) (1.97) (0.6) (0.77) (1.8) (1.50) (.44) 1/" NPT 1/8" NPT VS** /" NPT (.56) - (1.77) (1.97) (0.6) (0.77) (1.8) (1.50) (.44) 1/" NPT / Pilot Solenoid Operated - Valve ases Spring Return 456M3-VS** Spring Return with Latch Lock 456M3VS** 456M38VS** Pilot ir Return VS** Pilot Solenoid Return VS** ør 4 3 mounting holes øg S 1 pilot port PP 4 3 mounting holes øg 4 3 mounting holes øg Ø sq M N N M sq N N ports P T 5 ports P ports P ports P ody Thickness = M imensions,, and G and N as for spring return base ody Thickness = M ody Thickness = M Model Number G M N P PP R S T 456M3-VS** /" NPT (1.57) (4.06) (0.94) (1.50) (1.97) (0.6) (1.5) (1.50) (.44) 1/" NPT M3VS** /" NPT (.95) (4.06) - (1.50) (1.97) (0.6) (1.5) (1.50) (.44) 1/" NPT - (1.6) (3.66) (1.0) 456M38VS** /" NPT (.95) (4.06) - (1.50) (1.97) (0.6) (1.5) (1.50) (.44) 1/" NPT - (1.6) (3.66) (1.0) VS** /" NPT 1/8" NPT (1.6) (4.06) - (1.50) (1.97) (0.6) (1.5) (1.50) (.44) 1/" NPT 1/8" NPT VS** /" NPT (4.06) - (1.50) (1.97) (0.6) (1.5) (1.50) (.44) 1/" NPT IN ONTROL 11/05

37 1600 Spool Valves SPOOL VLVS 1/, 3/, 5/, NPT (SP) PILOT OPRT General escription range of compact 3/ and 5/ pilot operated spool valves in stainless steel for use on gases and liquids. ompact. 3/ and 5/ versions. Non lube. Meet N standard. Stainless steel internals. Operating Medium Gases iltered lubricated or non-lubricated air, inert gas, sweet (natural) gases. Sour gas option available (details on application) Liquids Low pressure hydraulic, mineral oil or water. unctional Symbols 3/ Normally losed 3/ Normally Open 3/ iverter 3/ hangeover 5/ Technical ata Ports 1/"NPT (SP option available) 1/8" NPT pilot ports Working Pressure (gases & liquids) 1 bar (174 psi) v (Kv) 3/ valves 3.5 (53) 5/ valves 3.5 (53) Working Temperature -0º to +180º (-4º to +356º) Minimum Pilot Pressure t 6.3 bar (90psi) body pressure 3/ and 5/ Spring return 3 bar (45psi) Pilot return bar (30psi) Maximum low 6 bar (87 psi), 1 bar (14.5 psi) differential 3/ L/min (13 SM) 5/ L/min (13 SM) 1600 SRIS onstruction Materials Stainless Steel ISI 316L to N MR ody Stainless Steel ISI 316L to N MR Spool 316 Stainless Steel Spring luoroelastomer Seals 1600 SPOOL VLVS Preferred Models Model Number escription Weight kg (lbs) Symbol 436M1-VS 1/" NPT 3/ Pilot operated, spring return 1.40 (3.09) 1 436M1VS 1/" NPT 3/ Pilot operated, spring return.00 (4.41) with latch lock, manual reset 1 436M18VS 1/" NPT 3/ Pilot operated, spring return.00 (4.41) with reverse latch lock, manual reset VS 1/" NPT 3/ Pilot operated, pilot return 1.50 (3.31) 456M1-VS 1/" NPT 5/ Pilot operated, spring return.00 (4.41) M1VS 1/" NPT 5/ Pilot operated, spring return.60 (5.73) with latch lock, manual reset M18VS 1/" NPT 5/ Pilot operated, spring return.60 (5.73) with reverse latch lock, manual reset VS 1/" NPT 5/ Pilot operated, pilot return. (4.63) IN ONTROL 11/05

38 1600 Spool Valves SPOOL VLVS 1/, 3/, 5/, NPT (SP) 1600 SRIS 1600 SPOOL VLVS PILOT OPRT INSTLLTION IMNSIONS mm (inches) 3/ Pilot Solenoid Operated - Spring or Pilot Return Pilot Operated, Spring Return 436M1-VS 1 1 pilot port PP Pilot Operated, Pilot Return VS 1 pilot port PP 1 1 pilot port PP Pilot Operated, Spring Return with Latch Lock 436M1VS, 436M18VS 1 1 pilot port PP or basic valve dimensions, see 3/ pilot return bases on page Model Number P PP 436M1-VS /" NPT 1/8" NPT (5.39) (1.6) 1/" NPT 1/8" NPT VS /" NPT 1/8" NPT (5.08) (1.6) 1/" NPT 1/8" NPT 436M1VS /" NPT 1/8" NPT & 436M18VS (6.77) (1.6) 1/" NPT 1/8" NPT 5/ Pilot Solenoid Operated - Spring or Pilot Return Pilot Operated, Spring Return 456M1-VS Pilot Operated, Pilot Return VS Pilot Operated, Spring Return with Latch Lock 456M1VS, 456M18VS pilot port PP pilot port PP pilot port PP ports P 1 pilot port PP or basic valve dimensions, see 3/ pilot return bases on page Model Number P PP 456M1-VS /" NPT 1/8" NPT (6.89) (1.6) 1/" NPT 1/8" NPT VS /" NPT 1/8" NPT (6.57) (1.6) 1/" NPT 1/8" NPT 456M1VS 3 1/" NPT 1/8" NPT & 456M18VS (8.7) (1.6) 1/" NPT 1/8" NPT IN ONTROL 11/05

39 1600 Spool Valves SPOOL VLVS 1/, 3/, 5/, NPT (SP) 1600 SRIS MNULLY OPRT (P) General escription range of compact 3/ and 5/ manually operated spool valves in stainless steel for use on gases and liquids. losed enter ompact Meets N Operating Medium Gases iltered lubricated or non-lubricated air, inert gas, sweet (natural) gases. Sour gas option available. (details on application) Liquids Low pressure hydraulic, mineral oil or water. Technical ata Ports 1/4" 1-1/ NPT (SP option available) 1/4" NPT pilot ports Working Pressure (gases & liquids) 1 bar (174 psi) v (Kv) 3/ valves 3.5 (53) 5/ valves 3.5 (53) 1600 SPOOL VLVS unctional Symbols 3/ Normally losed 3/ Normally Open 3/ iverter 3/ hangeover 5/ Working Temperature -0º to +160º (-4º to +356º) Operating orce bar (145 psi), body pressure 3/ 11N (5 lbf) 5/ 11N (5 lbf) Maximum low 6 bar (87 psi), 1 bar (14.5 psi) differential 3/ L/min (94 SM) 5/ L/min (14 SM) onstruction Materials Stainless Steel ISI 316L to N MR ody Stainless Steel ISI 316L to N MR Poppet 316 Stainless Steel Spring luoroelastomer Seals Preferred Models Model Number escription Weight kg (lbs) Symbol 436M7-VS 1/" NPT 3/ Pad operated, spring return 1.35 (.98) VS 1/" NPT 3/ Pad operated, push - pull 1.30 (.87) VS 1/" NPT 3/ Pad operated, push-pull with detent 1.40 (3.09) VS 1/" NPT 3/ Pad operated, pilot air return 1.50 (3.31) 456M7-VS 1/" NPT 5/ Pad operated, spring return 1.95 (4.30) VS 1/" NPT 5/ Pad operated, push-pull 1.90 (4.19) VS 1/" NPT 5/ Pad operated, push-pull with detent.00 (4.41) VS 1/" NPT 5/ Pad operated, pilot air return. (4.63) IN ONTROL 11/05

40 1600 Spool Valves SPOOL VLVS 1/, 3/, NPT (SP) 1600 SRIS 1600 SPOOL VLVS PILOT SOLNOI OPRT INSTLLTION IMNSIONS mm (inches) 3/ Pad Operated - Spring Return, Pad Operated (Push-Pull), Pad Operated Pilot ir Return Pad Operated, Spring Return 436M7-VS 1 Travel T Pad Operated (Push-Pull) VS Pad Operated (Push-Pull) with detent VS Pad Operated, Pilot ir Return VS 1 pilot port PP 1 Travel T or basic valve dimensions, see 3/ spring return bases on page or basic valve dimensions, see 3/ pilot air return bases on page Model Number P PP T 436M7-VS /" NPT (.00) (3.07) 1/" NPT - (0.37) VS /" NPT 1/8" NPT 9.5 (.00) (3.07) 1/" NPT 1/8" NPT (0.37) VS /" NPT 1/8" NPT 9.5 (.00) (3.07) 1/" NPT 1/8" NPT (0.37) VS /" NPT 1/8" NPT 9.5 (.00) (3.07) 1/" NPT 1/8" NPT (0.37) 5/ Pad Operated - Spring Return, Pad Operated (Push-Pull), Pad Operated Pilot ir Return Pad Operated, Spring Return 456M7-VS Pad Operated (Push-Pull) VS Pad Operated (Push-Pull) with etent VS Pad Operated, Pilot ir Return VS Travel T Travel T pilot port PP or basic valve dimensions, see 5/ spring return bases on page or basic valve dimensions, see 5/ pilot air return bases on page Model Number P PP T 456M7-VS /" NPT (.00) (3.07) 1/" NPT - (0.37) VS /" NPT 1/8" NPT 9.5 (.00) (3.07) 1/" NPT 1/8" NPT (0.37) VS /" NPT 1/8" NPT 9.5 (.00) (3.07) 1/" NPT 1/8" NPT (0.37) VS /" NPT 1/8" NPT 9.5 (.00) (3.07) 1/" NPT 1/8" NPT (0.37) IN ONTROL 11/05

41 1600 Spool Valves SPOOL VLVS 1/, 3/, 5/, NPT (SP) MNULLY OPRT (LVR) General escription range of compact 3/ and 5/ pilot operated spool valves in stainless steel for use on gases and liquids. losed enter ompact Unique Key Operating Medium Gases iltered lubricated or non-lubricated air, inert gas, sweet (natural) gases. Sour gas option available (details on application) Technical ata Ports 1/"NPT (SP option available) 1/8" NPT vent port Working Pressure (gases & liquids) 1 bar (174 psi) v (Kv) 3/ valves 3.5 (53) 5/ valves 3.5 (53) Working Temperature -0º to +180º (-4º to +356º) 1600 SRIS 1600 SPOOL VLVS Liquids Low pressure hydraulic, mineral oil or water. unctional Symbols 3/ Normally losed 3/ Normally Open 3/ iverter 3/ hangeover 5/ Operating orce bar (145 psi), body pressure 3/ 61N (13.7 lbf) 5/ 61N (13.7 lbf) Maximum low 6 bar (87 psi), 1 bar (14.5 psi) differential 3/ L/min (13 SM) 5/ L/min (13 SM) onstruction Materials Stainless Steel ISI 316L to N MR ody Stainless Steel ISI 316L to N MR Spool 316 Stainless Steel Spring luoroelastomer Seals Preferred Models Model Number escription Weight kg (lbs) Symbol 436M5-VS 1/" NPT 3/ Lever operated, spring return 1.40 (3.09) VS 1/" NPT 3/ Lever operated with detent 1.50 (3.31) 456M5-VS 1/" NPT 5/ Lever operated, spring return.00 (4.41) VS 1/" NPT 5/ Lever operated with detent. (4.63) IN ONTROL 11/05

42 1600 Spool Valves SPOOL VLVS 1/, 3/, NPT (SP) 1600 SRIS 1600 SPOOL VLVS MNULLY OPRT LVR INSTLLTION IMNSIONS mm (inches) 3/ Lever Operated - Spring Return, Lever Operated with etent Lever Operated, Spring Return 436M5-VS Lº 1 øl Lever Operated with etent VS Vent port V Lº 1 øl L L or basic valve dimensions, see 3/ spring return bases on page Model Number L L L P V 436M5-VS /" NPT - (1.81) (1.6) (4.61) 1/" NPT VS /" NPT 1/8" NPT (1.81) (1.6) (4.61) 1/" NPT 1/8" NPT IN ONTROL 11/05

43 1750 Poppet Valves POPPT VLVS 1/4-1 1/, 3/, NPT (SP) 1750 SRIS PILOT SOLNOI OPRT General escription range of compact 3/ pilot solenoid operated poppet valves in Stainless Steel for use on gases and liquids. igh flow. azardous area solenoids. oil with 316 housing. TX UL / S Low temperature range. Operating Medium Gases iltered lubricated or nonlubricated air, inert gas, sweet (natural) gases. sour gas option available. (details on application) Liquids Low pressure hydraulic, mineral oil or water. (details on application) unctional Symbols 3/ Normally losed 3/ Normally Open 3/ iverter 3/ hangeover Technical ata Ports 1/4" - 1-1/ NPT (SP option available) 1/4" NPT pilot ports Working Pressure (gases & liquids) 3 to 1 bar (45 to 174 psi) v (Kv) 1/ (5) 3/8 -. (31) 1/ (57) 3/4 -. (146) (14) 1-1/4-0.0 (86) 1-1/ (400) Working Temperature Valve only version -0º to +180º (-4º to +356º) Solenoid - mbient temperature onstruction Materials -0º to +65º (-4º to +149º) Stainless Steel ISI 316L Low temperature version to N MR ody -50º (-58º ) (optional) Stainless Steel ISI 316L Minimum Pilot Pressure to N MR Poppet t 6.3 bar (90 psi) body pressure 316 Stainless Steel Spring 1/4-3/8 Spring return 1/4, 3/8 and 1/ luoroelastomer 4.0 bar (58.0 psi) 3/4, 1, 1-1/4 and 1-1/ Nitrile 1/ - 1-1/ Spring return Solenoid 3.0 bar (43.5 psi) Refer to solenoid specification Maximum low 6 bar (87 psi), 1 bar (14.5 psi) differential 1/4-668 L/min (94 SM) 3/8-351 L/min (14 SM) 1/ L/min (6 SM) 3/ L/min (565 SM) L/min (848 SM) 1-1/4-30 L/min (1130 SM) 1-1/ L/min (1583 SM) 1750 PNUMTI VLVS Model ode Size = 1/4 3 = 3/8 4 = 1/ 6 = 3/4 8 = 1 5 = 1-1/4 7 = 1-1/ 3 M unction 3 = N/ 5 = Universal Operator 1 = ir 3 = N/ solenoid 4 = Univ solenoid = nd solenoid Solenoid Type See Solenoid Model odes on page ody Seals V = St St / luoroelastomer S = St St / Nitrile = St St / Low Temp 6 Voltage odes = 1v = 4v M = 1v 50/60z N = v 60z Q = 40v 60z S = 0/30v 50/60z Y = 8v (solenoid type T only) other voltages special order IN ONTROL 11/05

44 1750 Poppet Valves POPPT VLVS 1/4-1 1/, 3/, NPT (SP) 1750 SRIS 1750 PNUMTI VLVS PILOT SOLNOI OPRT SOLNOI MOL OS Model ode Safety Rating Protection and ousing Material pproved rea Ingress Protection Weight kg (lbs) L NM 7 & 9 lameproof. Stainless Steel lass I, Groups & NM (0.65) lass II, Groups, & G xd II T5 lameproof. erritic cast iron. Zones 1 and IP (.87) K xd II T6 lameproof. 316 Stainless Steel or luminium. Zones 1 and IP (3.57) P x me II T4/T5 Increased encapsulation. Glass reinforced polyamid. Zones 1 and IP (1.39) T x ia II T6 Intrinsically safe. Glass reinforced polyamid. Zones 0 IP (1.17) 4 None 3mm solenoid. Moulded Plastic. Not approved IP (0.44) Preferred models Model Number escription Weight kg (lbs) Symbol 33M3-V*+ 1/4 NPT 3/ Pilot solenoid operated, spring return, N/ 0.65 (1.43) + Sol 35M4-V*+ 1/4 NPT 3/ Pilot solenoid operated, spring return, UNIV 0.65 (1.98) + Sol 333M3-V*+ 3/8 NPT 3/ Pilot solenoid operated, spring return, N/ 0.90 (3.31) + Sol 335M4-V*+ 3/8 NPT 3/ Pilot solenoid operated, spring return, N/ 0.90 (3.31) + Sol 433M3-V*+ 1/ NPT 3/ Pilot solenoid operated, spring return, N/ 1.50 (19.97) + Sol 435M4-S*+ 1/ NPT 3/ Pilot solenoid operated, spring return, UNIV 1.50 (4.38) + Sol 635M4-S*+ 3/4 NPT 3/ Pilot solenoid operated, spring return, UNIV 5.06 (4.38) + Sol 835M4-S*+ 1 NPT 3/ Pilot solenoid operated, spring return, UNIV 5.06 (4.38) + Sol 535M4-S*+ 1 1/4 NPT 3/ Pilot solenoid operated, spring return, UNIV 9.06 (4.38) + Sol 1 SS 1 SS 1 SS 1 SS 735M4-S*+ 1 1/ NPT 3/ Pilot solenoid operated, spring return, UNIV (4.38) + Sol 1 SS * Specify solenoid type + Specify solenoid voltage Without solenoid fitted specify Z in position 13 (for Zones 0,1 & ), in a position 13 (for NM 7 & 9). 1/4, 3/8 and 1/ Normally losed versions have internal air supply to the solenoid - Specify code 3 in position 4 and code 3 in position 7 of model number code. 1/4, 3/8 and 1/ Normally Open and Universal versions require a separate air supply to the pilot solenoid - Specify code 5 in position 4 and code 4 in position 7 of model number code. 3/4 to 1 1/ Normally Open, Normally closed and Universal versions always require a separate main air supply to be taken to the pilot solenoid - Specify code 5 in position 4 and code 4 of position 7 of model number code. It is recommended that consideration be given to positioning a non-return valve in the separate supply line to the solenoid. This will help to prevent back-flow from the solenoid servo should a temporary/severe pressure drop occur across the main valve when it opens IN ONTROL 11/05

45 1750 Poppet Valves POPPT VLVS 1/4-1 1/, 3/, NPT (SP) 1750 SRIS PILOT SOLNOI OPRT SOLNOI SSMLIS SOLNOI O K (xd II T6), SOLNOI O K (NM 7 & 9) Solenoid code K (xd II T6) G Silencer Solenoid exhaust port SP S Solenoid exhaust port SP Solenoid code (xd IIc T5) INSTLLTION IMNSIONS mm (inches) S G Solenoid code P (x me II T4/T5) Solenoid code T (x ai II T6) Solenoid exhaust port SP Solenoid code L (NM 7 & 9) Model ode S G SP L 4(1.65) 18 (0.71) 40 (1.57) 1/8 NPT S G Solenoid exhaust port SP S G Solenoid exhaust port SP Solenoid code 4 (None/hazardous) G S IN plug 1750 PNUMTI VLVS 76(.99) 5 (0.71) 84 (1.57) 1/8 NPT K 1(4.33) 5 (0.71) 58 (1.57) M8 P & T 71.5(.81) 5 (0.71) 81 (1.57) 1/8 NPT 4 57(.4) 19.5 (0.71) 50 (1.57) 1/8 NPT SOLNOI SPIITIONS Model ode K P T L 4 Type of Protection xd II T6 xd IIc T5 x me II T4/T5 x ia IIc T6 NM 7 & 9 None pproved rea Zones 1 and Zones 1 and Zones 1 and Zone 0 lass I, Groups &, None lass II Groups, & G egree of Protection IP67 IP67 IP66 IP66 NM 4 (IP55) IP65 ousing 316 Stainless Steel erritic, ast Iron Glass reinforced Glass reinforced hromate Stainless Molded alt luminium poxy painted Polyamid Polyamid Steel Steel Plastic poxy coated poxy coated (St St conduit hub) oil potted able entry M0 x 1.5 M0 x 1.5 M0 x 1.5 M0 x 1.5 1/" NPT IN plug (lt cable entry available) 4" leads Power 5W 8W 6W 0.3W 7.3W 1.8W 7.3W 1.8W 9W onsumption 5W 5.6W 1.8W 5.6W 1.8W 9W(inrush 3V) Maximum dmissable 85º (185º) 0º (1º) T4 135º (75º) 85º (185º) 160º (30º) N/ Surface Temp T5 0º (1º) Maximum mbient 40º (4º) 40º (4º) T4 75º (167º) 65º (149º) 40º (4º) 55º (131º) Temperature T5 40º (4º) Maximum luid Temp 80º (176º) 75º (167º) 75º (167º) 75º (167º) 5º (1º) 75º (167º) pproved Standard TX TX TX TX UL Listed N/ S ertified N/ ertificate Number SIR03TX1319 0TX6008X 0TX603X 0TX6066X 06894X0000 N/ IN ONTROL 11/05

46 1750 Poppet Valves POPPT VLVS 1/4-1 1/, 3/, NPT (SP) 1750 SRIS 1750 PNUMTI VLVS PILOT SOLNOI OPRT INSTLLTION IMNSIONS mm (inches) 3/ Pilot Solenoid Operated - Spring Return, 1/4, 3/8, 1/ Valve ases 33M3-V*+ 333M3-V*+ 433M3-V*+ or solenoid dimensions, see page T V V+S 33M4-V*+ 333M4-V*+ 433M4-V*+ R S S W V V+S Solenoid supply port SS (See note) Model Number P R S T V V W X SS 33M3-V*+ 1/4 NPT (1/4 NPT) 3 (1.6) 3(1.6) 39(1.54) 41(1.61) M4-V*+ 1/4 NPT (1/4 NPT) - 3(1.6) - 41(1.61) - 6(1.0) - 1/8 NPT(1/8 NPT) 333M3-V*+ 3/8 NPT (3/8 NPT) 3 (1.6) 3(1.6) 39(1.54) 41(1.61) M4-V*+ 3/8 NPT (3/8 NPT) - 3(1.6) - 41(1.61) - 6(1.0) - 1/8 NPT(1/8 NPT) 433M3-V*+ 1/ NPT (1/ NPT) 38 (1.50) 3(1.6) 45(1.77) 50(1.97) M4-V*+ 1/ NPT (1/ NPT) - 3(1.6) - 50(1.97) - 37(1.46) - 1/8 NPT(1/8 NPT) 1/4, 3/8 and 1/ Normally closed versions have internal air supply to the solenoid - Specify code 3 in position 4 and code 3 in position 7 of model number code. 1/4, 3/8 and 1/ Normally open and Universal versions require a separate air supply to the pilot solenoid - Specify code 5 in position 4 and code 4 in position 7 of model number code. 3/ Pilot Solenoid Operated - Spring Return, 3/4, 1, 1-1/4, 1-1/ Valve ases 633M4-S*+ 833M4-S*+ 533M4-S*+ 733M4-S*+ Z Y V+S 1 N/ 3 N/O 3 N/ 1 N/O Solenoid mounting Solenoid supply port SS (See note) or basic valve dimensions, see page or Solenoid dimensions see page Model Number P Y Z SS 635M4-S*+ 3/4 NPT (1/4 NPT) 14 (0.55) 7(.83) 1/4 NPT(1/4 NPT) 835M4-S*+ 1 NPT (1/4 NPT) 14 (0.55) 7(.83) 1/4 NPT(1/4 NPT) 535M4-S*+ 1 1/4 NPT (1 1/4 NPT) 14 (0.55) 73(.87) 1/4 NPT(1/4 NPT) 735M4-S*+ 1 1/ NPT (1 1/ NPT) 14 (0.55) 73(.87) 1/4 NPT(1/4 NPT) 3/4 to 1 1/ Normally open, normally closed and universal versions always require a separate mains air supply to be taken to the pilot solenoid. Specify code 5 in position 4 and code 4 of position 7 of model number code IN ONTROL 11/05

47 1750 Poppet Valves POPPT VLVS 1/4 1-1/, 3/, NPT (SP) 1750 SRIS PILOT IR OPRT General escription range of compact 3/ pilot operated high flow poppet valves in stainless steel for use on gases. ompact igh flow 3/ N/O, N/ and Universal Meet N standard Non lube Low temperature range Operating Medium Gases iltered lubricated or non-lubricated air, inert, sweet (natural) gases. Sour gas option available. (details on application) Liquids Low pressure hydraulic, mineral oil or water. (details on application) unctional Symbols 3/ Normally losed 3/ Normally Open 3/ iverter 3/ hangeover Technical ata Ports 1/4" 1-1/ NPT (SP option available) 1/4" NPT pilot ports Working Pressure (gases & liquids) to 1 bar (30 to 174 psi) v (Kv) 1/ (5) 3/8 -. (31) 1/ (57) 3/4 -. (146) (14) 1-1/4-0.0 (86) 1-1/ (400) Working Temperature -0º to +180º (-4º to +356º) Low temperature version -50º (-58º ) (optional) Minimum Pilot Pressure t 6.3 bar (90 psi) body pressure 1/4-3/8 Spring return 4.0 bar (58.0 psi) 1/ - 1-1/ Spring return 3.0 bar (43.5 psi) Maximum low 6 bar (87 psi), 1 bar (14.5 psi) differential 1/4-668 L/min (94 SM) 3/8-351 L/min (14 SM) 1/ L/min (6 SM) 3/ L/min (565 SM) L/min (848 SM) 1-1/4-30 L/min (1130 SM) 1-1/ L/min (1583 SM) onstruction Materials Stainless Steel ISI 316L to N MR ody Stainless Steel ISI 316L to N MR Poppet 316 Stainless Steel Spring 1/4, 3/8 and 1/ luoroelastomer seals 3/4, 1, 1-1/4 and 1-1/ Nitrile seals 1750 PNUMTI VLVS Preferred Models Model Number escription Weight kg (lbs) Symbol 35M1-V 1/4 NPT 3/ Pilot air operated, spring return, UNIV 0.65 (1.43) 335M1-V 3/8 NPT 3/ Pilot air operated, spring return, UNIV 0.90 (1.98) 435M1-V 1/ NPT 3/ Pilot air operated, spring return, UNIV 1.50 (3.31) 635M1-S 3/4 NPT 3/ Pilot air operated, spring return, UNIV 5.00 (11.0) 835M1-S 1 NPT 3/ Pilot air operated, spring return, UNIV 5.00 (11.0) 535M1-S 1-1/4 NPT 3/ Pilot air operated, spring return, UNIV 9.00 (19.8) 735M1-S 1-1/ NPT 3/ Pilot air operated, spring return, UNIV 11.0 (4.3) IN ONTROL 11/05

48 1750 Poppet Valves POPPT VLVS 1/4 1-1/, 3/, NPT (SP) 1750 SRIS 1750 PNUMTI VLVS PILOT IR OPRT INSTLLTION IMNSIONS mm (inches) 3/ Pilot ir Operated - Spring Return, 1/4, 3/8, 1/ 35M1-V 335M1-V 3 Mounting holes ø L J G 1 N/, 3 N/O 3 N/, 1 N/O M 1 N/ N/O Pilot port PP 435M1-V L J 3 Mounting holes ø øn G 1 N/, 3 N/O 3 N/, 1 N/O M Pilot port PP 1 N/ N/O Model Number G J L M N P PP 35M1-V /4 NPT 1/8 NPT (0.94) (.13) (0.39) (1.6) (1.06) (0.6) (1.0) (1.75) (1.38) (1.6) (1.) - 1/4 NPT 1/8 NPT 335M1-V /8 NPT 1/8 NPT (0.94) (.13) (0.39) (1.6) (1.06) (0.6) (1.50) (.00) (1.73) (1.6) (1.) - 3/8 NPT 1/8 NPT 435M1-V / NPT 1/8 NPT (1.6) (.56) (1.) (1.50) (1.8) (0.6) (1.77) (.50) (1.97) (1.50) (1.4) (0.94) 1/ NPT 1/8 NPT 3/ Pilot ir Operated - Spring Return, 3/4, 1, 1-1/4, 1-1/ 635M1-S 835M1-S 535M1-S 735M1-S Pilot port V Pilot port PP J 1 N/ N/O L 1 N/, 3 N/O Mounting hole ø 3 N/, 1 N/O M M Vent port V Model Number J L M P PP V 635M1-S /4 NPT 1/4 NPT 1/4 NPT (.60) (4.17) (0.87) (.50) (.09) (0.43) (3.78) (0.91) (.50) (1.18) 3/4 NPT 1/4 NPT 1/4 NPT 835M1-S NPT 1/4 NPT 1/4 NPT (.60) (4.96) (0.87) (.50) (.48) (0.48) (3.78) (0.91) (.50) (1.38) 1 NPT 1/4 NPT 1/4 NPT 535M1-S /4 NPT 1/4 NPT 1/4 NPT (.64) (6.) (0.71) (.99) (3.05) (0.43) (4.57) (1.1) (.99) (1.67) 1-1/4 NPT 1/4 NPT 1/4 NPT 735M1-S / NPT 1/4 NPT 1/4 NPT (.64) (7.09) (0.71) (.99) (3.54) (0.43) (4.57) (1.1) (.99) (1.97) 1-1/ NPT 1/4 NPT 1/4 NPT IN ONTROL 11/05

49 1750 Poppet Valves 1/8" NPT 3/ POPPT VLVS PLUNGR OPRT, LVR ROLLR OPRT General escription ompact 3/ mechanically operated poppet valves in stainless steel for use on gases and liquids. or N/O, N/ and universal operation. Technical ata Ports 1/8"NPT (SP option available) Working Pressure (gases & liquids) bar (145 psi) v (Kv) 0.6 (3.7) Working Temperature -0º to +180º (-4º to +356º) Operating force at bar (145 psi) body pressure N/ N/O Plunger 44N (17lbf) 80N (0lbf) Lever roller 0N (17lbf) 36N (0lbf) Maximum low t 6 bar (87 psi), 1 bar (14.5 psi) differential 40 L/min (14. SM) 1750 SRIS onstruction Materials ody, operator and poppet Stainless steel ISI 316L to N MR Stainless steel springs luoroelastomer seals 1750 PNUMTI VLVS Preferred Models Model Number escription Weight kg (lbs) Symbol 133M6-SM 1/8" Plunger operated,spring return, N/ 0.1 (0.46) 134M6-SM 1/8" Plunger operated,spring return, N/O 0. (0.48) 133M8-SM 1/8" Lever operated,spring return, N/ 0.8 (0.6) 134M8-SM 1/8" Lever operated,spring return, N/O 0.9 (0.64) IN ONTROL 11/05

50 1750 Poppet Valves 1/8" NPT 3/ POPPT VLVS 1750 SRIS 1750 PNUMTI VLVS PLUNGR OPRT, LVR ROLLR OPRT INSTLLTION IMNSIONS mm (inches) 3/ Plunger Operated - Spring Return - 1/8 133M6-SM 134M6-SM 3 N/ 1 N/O 1 N/ 3 N/O G mounting holes M4 x 5 deep 3 Ports P mounting holes to suit M4 cap head screws Travel T K J R Model Number G J K L M N P R T 13*M6-SM /8" NPT 5 5 (.44) (1.6) (0.87) (0.35) (0.63) (0.63) (0.87) (0.95) (1.34) (0.39) /8" NPT (0.0) (0.0) Travel T =.5 (0.) to operate, 5.0 (0.0) maximum 3/ Lever Operated - Spring Return - 1/8 133M8-SM 134M8-SM ØL Travel T mounting holes to suit M4 cap head screws R G Other dimensions as for plunger operated version N M Model Number G J K L M N P R T 13*M8-SM /8" NPT 5 1 (3.07) (1.6) (0.87) (0.35) (0.63) (0.63) (0.87) - (1.34) - (0.79) (.07) (0.4) 1/8" NPT (0.0) (0.47) Travel T =.5 (0.) to operate, 5.0 (0.0) maximum IN ONTROL 11/05

51 1800 luoslide Semi-Rotary SLI VLVS 1/4, NPT (SP) 1800 SRIS MNULLY OPRT General escription 4 way semi-rotary slide valves with either lever or switch operation and 4 way linear slide valves in all stainless steel construction for onshore and offshore applications. eavy duty Lever direct coupled and 3 positions available or gases an liquids Operating Medium Gases iltered lubricated or non-lubricated air, inert gas, sweet (natural) gases. Sour gas option available (details on application) Liquids Low pressure hydraulic, mineral oil or water (details on application). unctional Symbols Technical ata Ports Semi-rotary valves 1/4" NPT (SP option available) v (Kv) 1/4" () Working pressure (gases) 0 to bar (43.5 to145 psi) Working temperature -0º to +70º (-4º to +158º) low at 6 bar (87 psi), 1 bar (14.5 psi) differential 1/4" L/min (3 SM) onstruction Materials Stainless Steel ISI 316L to N MR ody Stainless Steel ISI 316L to N MR Slide arrier 316 Stainless Steel Springs Nitrile Seals Graphite filled PT Slide 1800 LUOSLI SMI-ROTRY 4/ 4/3 Pressure release neutral 4/3 Pressure held neutral IN ONTROL 11/05

52 1800 luoslide Semi-Rotary SLI VLVS 1/4, NPT (SP) 1800 SRIS 1800 LUOSLI SMI-ROTRY MNULLY OPRT (LVR), MNULLY OPRT (SWIT) Preferred Models Model No escription Mass kg (lbs) Symbol 4555S 1/4"NPT 4/ Lever operated, position positive 1.7 (.80) 4M55S 1/4"NPT 4/ Lever operated, spring return 1.7 (.80) 43555S 1/4"NPT 4/3 Lever operated, positive, pressure release neutral 1.7 (.80) 43555S 1/4"NPT 4/3 Lever operated, positive, pressure held neutral 1.7 (.80) 43R555S 1/4"NPT 4/3 Lever operated, self centre, pressure release neutral 1.7 (.80) 43555S 1/4"NPT 4/3 Lever operated,self centre, pressure held neutral 1.7 (.80) or switch operated versions specify code 0 in positions 6 and 7 of model number code for positive and self centre versions and in position 6 for spring return versions. or Rear flange mounted versions specify code 7 in position 8 of model number code INSTLLTION IMNSIONS mm (inches) 4/, 4/3 Lever operated 4555S 4M55S 43*555S ØK S 4/, 4/3 Switch operated 4005S 4M05S Jº Jº 43*005S 1 V 3 4 W Ø Rear flange mounting N R S 4M07S 43*007S X 1 Y 3 T M 5 Ports P See note Mounting holes tapped x G deep L 3 4 NOT: Mounting holes Ø6.3(0.5) with screws to suit 6 (0.4) thick panel Model No G J K L M N P R S T V W X Y 4**5*5S M º /4"NPT (5.51) (.3) (.50) (0.79) (0.50) M6 (0.31) (.13) 34.75º (1.6) (1.50) (0.75) (0.94) 1/4"NPT (0.59) (0.51) (1.38) (1.57) (1.50) (.87) (0.37) IN ONTROL 11/05

53 1900 irect cting Valves 1/4, 3/8, 1/, 3/ NPT (SP) 1900 SRIS SOLNOI OPRT General escription range of direct acting 3/ universal hazardous area solenoid valves for the oil, gas and petrochemical industries. Lightweight Manual override, reset and latch versions xd II T6 316 Stainless Steel throughout TX, UL Universal operation Operating Medium Gases iltered lubricated or non-lubricated air, inert gas, sweet (natural) gases. Sour gas option available. (details on application) Liquids Low pressure hydraulic, mineral oil or water. unctional Symbols 3/ Normally losed 3/ Normally Open 3/ iverter 3/ hangeover Technical ata Port s 1/4", 3/8", 1/ NPT (SP option available) Orifice 8.8mm (0.35 ) v (Kv) 0.86 (1.5) Working pressure (gases and liquids) Maximum body pressure 0 bar (90 psi) Maximum operating pressure differential bar (145 psi) Working temperature mbient temperature -50º to +40º (-58º to +4º) onstruction Materials Stainless Steel ISI 316 S11 to N MR ody 316 Stainless Steel Spindle 316 Stainless Steel Springs Nitrile (una N) Seals options: luoroelastomer and PM Solenoid Specifications lameproof xd II T6 to TX standard egree of Protection IP67 ousing 316 Stainless Steel able ntry M0 x 1.5 oil Voltages - 1v, 4v, 1v - (50/60 z) 4v, 1v, v, 0v Voltage Tolerance +% to -15% Power onsumption - 6 Watts units fitted with rectifier oil Insulation lass 1900 IRT TING VLVS uty ycle 0% ontinuously Rated arth onnections Internal and xtrenal IN ONTROL 11/05

54 1900 irect cting Valves 1/4, 3/8, 1/, 3/ NPT (SP) 1900 SRIS 1900 IRT TING VLVS SOLNOI OPRT MOL OS 3/ Valves 35M3 S Voltage odes Valve Size = 1/4 3 = 3/8 4 = 1/ Preferred Models Valve Type = Standard M = with manual override U = with manual latch X = with manual reset Port type 1 = SP = NPT Solenoid Type K = xd II T6 = 1v = 4v G = 1v J = 4v 50/60z M = 1v 50/60z N = v 50/60z S = 0v 50/60z Model No escription Mass kg (lbs) Symbol 35M3-SK + 1/4" NPT 3/ irect acting solenoid operated,.00 (4.41) spring return 35M3MSK + 1/4" NPT 3/ irect acting solenoid operated,. (4.63) spring return with manual override 35M3USK + 1/4" NPT 3/ irect acting solenoid operated,. (4.63) spring return with manual latch M3XSK + 1/4" NPT 3/ irect acting solenoid operated,. (4.63) spring return with manual reset 1 335M3-SK + 3/8" NPT 3/ irect acting solenoid operated,. (4.63) spring return 335M3MSK + 3/8" NPT 3/ irect acting solenoid operated,.0 (4.85) spring return with manual override, 335M3USK + 3/8" NPT 3/ irect acting solenoid operated,.0 (4.85) spring return with manual latch M3XSK + 3/8" NPT 3/ irect acting solenoid operated,.0 (4.85) spring return with manual reset 1 435M3-SK + 1/" NPT 3/ irect acting solenoid operated,. (4.63) spring return 435M3MSK + 1/" NPT 3/ irect acting solenoid operated,.0 (4.85) spring return with manual override 435M3USK + 1/" NPT 3/ irect acting solenoid operated,.0 (4.85) spring return with manual latch M3XSK + 1/" NPT 3/ irect acting solenoid operated,.0 (4.85) spring return with manual reset 1 + Specify solenoid voltage IN ONTROL 11/05

55 1900 irect cting Valves 1/4, 3/8, 1/, 3/ NPT (SP) 1900 SRIS SOLNOI OPRT INSTLLTION IMNSIONS mm (inches) 3/ irect Solenoid Operated, Spring Return 35M3-SK + 335M3-SK + 435M3-SK + oil housing can be rotated 360º to facilitate wiring. J G able entry M0 x 1.5 L mounting holes V clearance 1 3 Ø N M K R S T mounting holes ØW 1900 IRT TING VLVS Model No G J K L M N P R S T V W 35M3-SK /4" M4 8.5 (5.90) (3.07) (1.77) (.8) (.05) (.13) (.05) (0.91) (1.00) (.60) (0.47) (0.79) (1.34) 1/4" (1.81) (1.65) (1.0) M4 (0.33) 335M3-SK /8" M4 8.5 (6.46) (3.07) (.56) (.8) (.05) (.13) (.05) (1.34) (1.6) (.80) (0.67) (0.94) (1.65) 3/8" (1.81) (1.65) (1.0) M4 (0.33) 435M3-SK /" M4 8.5 (6.46) (3.07) (.56) (.8) (.05) (.13) (.05) (1.34) (1.6) (.80) (0.67) (0.94) (1.65) 1/" (1.81) (1.65) (1.0) M4 (0.33) 3/ irect Solenoid Operated, Spring Return with Manual Override. 3/ irect Solenoid Operated, Spring Return with Manual Latch. 3/ irect Solenoid Operated, Spring Return with Manual Reset. 35M3MSK + 335M3MSK + 435M3MSK + 35M3USK + 335M3USK + 435M3USK + 35M3XSK + 335M3XSK + 435M3XSK + X X RST X Y Model No 35M3MSK + 54 (.13) 335M3MSK + 54 (.13) 435M3MSK + 54 (.13) ll other dimensions as above X Model No X Y 35M3USK (1.18) (1.57) 335M3USK (1.18) (1.57) 435M3USK (1.18) (1.57) ll other dimensions as above Model No 35M3XSK + 54 (.13) 335M3XSK + 54 (.13) 435M3XSK + 54 (.13) ll other dimensions as above X IN ONTROL 11/05

56 4500 ncillary Valves 1/4, 3/, 5/, NPT (SP) 4500 SRIS 4500 SSORIS IR PRSSUR SWIT General escriptions compact fully adjustable pneumatically operated 316 Stainless Steel pressure switch with operating pressures up to 16 bar (3 psi). or use on failsafe systems. ompact / Lightweight. 5 pressure ratings. Integrated tagging facility. luoroelastomer seals. 3/ and 5/ versions. Operating Medium Gases iltered lubricated or non-lubricated air, inert gas, sweet (natural) gases. Sour gas option available. (details on application) unctional Symbols 3/ Normally losed 3/ Normally Open 3/ iverter 3/ hangeover 5/ Technical ata Ports 1/4"NPT (SP option available) 1/8"NPT Pilot port v (Kv) 3/ valves 0.5 (7.5) 5/ valves 0.7 (.5) Working Pressure or main directional valve 1 bar (174 psi) Maximum Pilot Pressure Inlet 16 bar (3 psi) Regulated Pressure (adjustable) or main directional valve 1.0 to.0 bar (14.5 to 9 psi) 1.0 to 4.0 bar (14.5 to 58 psi) 1.0 to 7.0 bar (14.5 to psi) 1.0 to bar (14.5 to 145 psi) 1.0 to 16 bar (14.5 to 3 psi) (Note 16 bar regulated pressure must be fed from independant supply to main directional valve) Working Temperature -0º to +80º (-4º to +176º) Maximum low 6 bar (87 psi), 1 bar (14.5 psi) differential 3/ valves L/min (17 SM) 5/ valves L/min (4 SM) Pressure Setting ysteresis 0.5 bar (3.63 psi) onstruction Materials Stainless steel ISI 316L to N MR-0175 ody Stainless steel ISI 316L to N MR-0175 Spool 316 Stainless Steel Springs luoroelastomer Seals luoroelastomer iaphragm unction PPLITION OR SPRING RTURN TUTORS 3/ 1) irfail stay put or this application port 3 is plugged. When pilot air is applied to port 1 or in the Normally losed mode and pilot air is greater than set pressure, air can flow in either direction. When pilot pressure falls below set pressure, the integral spool valve closes therefore block port 1 to and the output from remains blocked, leaving the actuator or downstream signal in the last controlled position. ) Venting y not plugging port 3 the valve can be used in the Normally Open, losed, iverter or hangeover mode and the actuator will vent to atmosphere. PPLITION OR OUL TING TUTORS 5/ 1) irfail open or close or this application when air is applied to ports 1 and 3 (N/) or 1 and 5 (N/O) and the actuator is connected to the outlets and 4 and pilot air is greater than set pressure, air from another 5/ solenoid or air operated valve will control the double acting actuator. The pressure switch can be piped Normally losed or Normally Open and can detect air falling below the set pressure to either open or close the actuator, via a volume tank IN ONTROL 11/05

57 4500 ncillary Valves 1/4, 3/, 5/, NPT (SP) 4500 SRIS IR PRSSUR SWIT Model Number Ports P Weight kg (lbs) Symbol PS3SV0 1/4 NPT 3/ djustable pressure switch 1.60 (3.53) bar (9 psi) PS3SV04 1/4 NPT 3/ djustable pressure switch 1.60 (3.53) 4 bar (58 psi) PS3SV07 1/4 NPT 3/ djustable pressure switch 1.60 (3.53) 7 bar ( psi) PS3SV 1/4 NPT 3/ djustable pressure switch 1.60 (3.53) bar (145 psi) PS3SV16 1/4 NPT 3/ djustable pressure switch 1.60 (3.53) 16 bar (3 psi) PS5SV0 1/4 NPT 5/ djustable pressure switch.05 (4.5) bar (9 psi) PS5SV04 1/4 NPT 5/ djustable pressure switch.05 (4.5) 4 bar (58 psi) PS5SV07 1/4 NPT 5/ djustable pressure switch.05 (4.5) 7 bar ( psi) PS5SV 1/4 NPT 5/ djustable pressure switch.05 (4.5) bar (145 psi) PS5SV16 1/4 NPT 5/ djustable pressure switch.05 (4.5) 16 bar (3 psi) 4500 SSORIS INSTLLTION IMNSIONS mm (inches) 3/ Pressure Switch 5/ Pressure Switch øg øg SSORIS Tamper Proof ap Kit Tamper proof cap kit SS38-6 (1.0) Tagging holes Thread Pilot port Tagging holes Thread Pilot port 13 (0.51) Panel Mounting Kit Panel mounting kit SS38-0 Wire Lock ole Kit comprises 1 - Pressure adjustment screw, 1 - Tamper proof cap M34 x 1,5 Mounting racket Mounting bracket kit: SS38-5 M sq ø 1500 Series 3/ valve M sq N ø 1500 Series 3/ valve 13 (0.51) 90 (3.54) 70 (.76) Mounting holes ø8.5 (ø0.33) or basic dimensions of 3/ and 5/ valves see pg (Spring Return ases) 40 (1.57) ø34.5 (ø1.36) Model Number G M N PS3SV** 17.5(5.0) 54(.13) 70(.76) 40(1.57) 36(1.4) 13(0.51) 44(1.73) M34X1.5 3(1.6) PS5SV** 17.5(5.0) 93(3.66) 70(.76) 40(1.57) 36(1.4) 13(0.51) 44(1.73) M34X1.5 3(1.6) 45(1.77) Kit comprises 1 - racket 1 - Panel nut IN ONTROL 11/05

58 4500 ncillary Valves 1/4, 3/8, 1/, 3/4, 1, NPT (SP) 4500 SRIS 4500 SSORIS UNI-IRTIONL LOW RGULTORS I-IRTIONL LOW RGULTORS General escription Uni-directional 316 Stainless Steel in-line flow regulators for uni-directional operation (free flow return). i-directional 316 Stainless Steel in-line flow regulators for bi-directional operation (separate flow control in each direction). Operating Medium Gases iltered lubricated or non-lubricated air, inert gas, sweet (natural) gases. Sour gas option available. (details on application) Liquids Low pressure hydraulic, mineral oil or water. unctional Symbols Uni-directional i-directional Technical ata Working Pressure bar (145 psi) Working Temperature -0º to +70º (-4º to +158º) Low temperature version -50º (-58º ) (optional) Maximum low L/min (SM) v(kv) 6 bar (87 psi), 1 bar (14.5 psi) differential Uni-directional 1/4 00(35) -1.0(15.5) 3/8 1680(59) -1.7(6) 1/ 50(89) -.5(39) 3/4 548(19) -5.4(84) 1 980(347) -9.8(15) i-directional 1/4 60() -0.6(9.6) 3/8 190(45) -1.3(0) 1/ 000(71) -.0(31) onstruction Materials Stainless Steel ISI 316L to N MR ody Stainless Steel ISI 316L to N MR Internals 316 Stainless Steel Springs Nitrile Seals MOL OS, INSTLLTION IMNSIONS mm (inches) and WIGT kg (lbs) Uni-irectional low Regulators i-irectional low Regulators RGSN1 (1/4 ) 3RGSN1 (3/8 ) 4RGSN1 (1/ ) L (djustment to full flow) exagon socket N a/f M a/f (Locknut) 6RGSN1 (3/4 ) 8RGSN1(1 ) L (djustment to full flow) exagon socket N a/f M a/f (Locknut) ISN1 (1/4 ) 3ISN1 (3/8 ) 4ISN1 (1/ ) L (djustment to full flow) exagon socket N a/f M a/f (Locknut) Mounting holes øj 1 Mounting holes øj ports ports Model Number Ports G J L M N WIGT Uni-irectional RGSN1 1/4 NPT 48(1.89) 0(0.79) 9(0.35) 5.4(1.00) 5.4(1.00) 56(.0) 40(1.57) 6.35(0.5) 6(0.4) 18(0.71) 5(0.0) 0.6(0.57) 3RGSN/8 NPT 70(.76) 9(1.14) 14.5(0.57) 35(1.38) 35(1.38) 76(.99) 45(1.77) 6.35(0.5) 1(0.47) 3.3(0.9) 6(0.4) 0.75(1.65) 4RGSN1 1/ NPT 70(.76) 9(1.14) 13.5(0.57) 35(1.38) 35(1.38) 76(.99) 45(1.77) 6.35(0.5) 1(0.47) 3.3(0.9) 6(0.4) 0.75(1.65) 6RGSN/4 NPT 0(3.94) 16(0.63) 5.4(1.00) 50.8(.00) 50.8(.00) 95(3.74) 19(0.75) 6.35(0.5) 19(0.75) 30.5(1.0) (0.39) 1.75(3.86) 8RGSN1 1 NPT 15(4.9) 19(0.75) 31.75(1.5) 63.5(.50) 63.5(.50) 95(3.74) 4(0.94) 6.35(0.5) 19(0.75) 36(1.4) 1(0.47).75(6.06) i-irectional G 1 ports G ISN1 1/4 NPT 85(3.35) 8(1.) 15.5(0.61) 40(1.57) 5.4(1.00) 44.5(1.75) 3(1.6) 6.35(0.5) 6(0.4) 18(0.71) 5(0.0) 0.43(0.95) 3ISN/8 NPT 11(4.76) 35(1.38) 1(0.83) 51(.00) 35(1.38) 63.5(.50) 45(1.77) 6.35(0.5) 1(0.47) 3.3(0.9) 6(0.4) 1.40(3.09) 4ISN1 1/ NPT 11(4.76) 35(1.38) 1(0.83) 51(.00) 35(1.38) 63.5(.50) 45(1.77) 6.35(0.5) 1(0.47) 3.3(0.9) 6(0.4) 1.40(3.09) L G Mounting holes øj IN ONTROL 11/05

59 4500 ncillary Valves 1/4, 3/8, 1/, NPT (SP) 4500 SRIS NL VLVS XUST PORT LOW RGULTORS General escription Needle Valve 316 Stainless Steel Needle Valve with 3mm or 6mm orifice. xhaust Port low Regulators 316 Stainless Steel exhaust flow regulator/breather supplied complete with tamper proof cap. Operating Medium Gases iltered non-lubricated air, inert, sweet (natural) gases. unctional Symbols Needle valve xhaust port flow regulators Technical ata Working Pressure 1 bar (145 psi) maximum Working Temperature -0º to +70º (-4º to +158º) Low temperature version -50º (-58º ) (optional) Maximum low L/min (SM) - v (Kv) 6 bar (87 psi), 1 bar (14.5 psi) differential Needle Valve (3mm orifice) 1/4 90(.5) -0.30(4.6) Needle Valve (6mm orifice) 1/4 640(3) -0.64() xhaust Port low Regulators 1/4 646(3) -0.65() 3/8 10(39) -1.(17) 1/ 1800(64) -1.80(8) onstruction Materials Stainless Steel ISI 316L to N MR ody Stainless Steel ISI 316L to N MR Internals 316 Stainless Steel Spring Nitrile Seals 4500 SSORIS MOL OS, INSTLLTION IMNSIONS mm (inches) and WIGT kg (lbs) Needle Valve NVSN3 (1/4-3mm orifice) NVSN6 (1/4-6mm orifice) xhaust Port low Regulators RSN (1/4 ) 3RSN (3/8 ) 4RSN (1/ ) a/f ports ll dimensions as for uni-directional flow regulators Model RGSN1 on page ll units have 0.4mm (0.016 ) diameter minimum orifice to eliminate complete shut off. Units supplied complete with tamper proof cap. Model Number Ports Weight NVSN3 1/4 NPT (1.89) (1.00) (0.57) NVSN6 1/4 NPT (1.89) (1.00) (0.57) Model Number Thread Weight RSN 1/4 NPT (1.87) (0.67) (0.11) 3RSN 3/8 NPT (.60) (0.9) (0.33) 4RSN 1/ NPT (3.44) (0.9) (0.44) IN ONTROL 11/05

60 4500 ncillary Valves NON RTURN VLVS 1/4, 3/8, 1/, 3/4, 1, NPT (SP) 4500 SRIS 4500 SSORIS NON RTURN VLVS General escriptions Non Return Valves 316 Stainless Steel non return valves in two ranges - one for pressures up to 1 bar (174psi) and one for pressures up to 5 bar (36 psi). Operating Medium Gases iltered lubricated or non lubricated air, inert gas, sweet (natural) gases. Sour gas option available. (details on application) Liquids Low pressure hydraulic, mineral oil or water. unctional Symbols Non return valves 1 Technical ata Working Pressure (gases & liquids) 1 bar (174 psi) 5 bar (36 psi) Minimum Opening Pressure 0. bar (.90 psi) Working Temperature -0º to +70º (-4º to +158º) Low temperature version -50º (-58º ) (optional) Maximum low L/min (SM) - v(kv) 6 bar (87 psi), 1 bar (14.5 psi) differential Non return valves (1 bar) 1/4 1600(57) 1.6(5) 3/8 00(80).3(35) 1/ 3800(137) 3.9(60) 3/4 5800(05) 5.8(90) (74) 7.8() Non return valves (5 bar) 1/4 736(6 ) 0.74(11.4) 3/8 1840(65) 1.85(8.5) 1/ 600(91).60(40) onstruction Materials Stainless Steel ISI 316L to N MR ody Stainless Steel ISI 316L to N MR Internals cetal poppet 316 Stainless Steel Spring Nitrile Seals MOL OS, INSTLLTION IMNSIONS mm (inches) and WIGT kg (lbs) Non Return Valves (1 bar) NRVSN1 (1/4 ) 3NRVSN1 (3/8 ) 4NRVSN1 (1/ ) 6NRVSN1 (3/4 ) 8NRVSN1 (1 ) Non Return Valves (5 bar) NRVSN5 (1/4 ) 3NRVSN5( 3/8 ) 4NRVSN5 (1/ ) a/f ports a/f a/f IRTION O LOW ø IRTION O LOW IRTION O LOW ports ports Model Number Ports Weight 1 bar NRVSN1 1/4 NPT 50(1.97).(0.87) - 0.1(0.6) 3NRVSN/8 NPT 65(.56) 30.5(1.0) (0.66) 4NRVSN1 1/ NPT 65(.56) 30.5(1.0) (0.66) 6NRVSN/4 NPT 85(3.35) 45(1.77) 50.8(.00) 1.00(.0) 8NRVSN1 1 NPT 85(3.35) 45(1.77) 50.8(.00) 1.00(.0) 5 bar NRVSN5 1/4 NPT 70(.76) 3.4(0.87) (0.4) 3NRVSN5 3/8 NPT 80(3.15) 33(1.30) (1.01) 4NRVSN5 1/ NPT 90(3.54) 41.3(1.63) (1.68) IN ONTROL 11/05

61 4500 ncillary Valves 1/4, 3/8, 1/, 3/4, 1, NPT (SP) QUIK XUST VLVS SUTTL VLVS General escriptions Quick xhaust Valves 316 Stainless Steel quick exhaust valves in 5 sizes. Shuttle Valves 316 Stainless Steel shuttle valves for three way OR function. Operating Medium Gases iltered lubricated or non lubricated air, inert gas, sweet (natural) gases. Sour gas option available. (details on application) Liquids Low pressure hydraulic, mineral oil or water. unctional Symbols Quick exhaust valve Shuttle valve Technical ata Working Pressure (gases & liquids) 1 bar (174 psi) Working Temperature -0º to +70º (-4º to +158º) Low temperature version -50º (-58º ) (optional) Maximum low L/min (SM) - v(kv) 6 bar (87 psi), 1 bar (14.5 psi) differential Quick xhaust Valve (supply to outlet) 1/4 190(46) 1.3(0) 3/8 18(64) 1.8(8) 1/ 38(135) 3.8(59) 3/4 450(160) 4.5(70) (74) 7.8() Quick xhaust Valve (outlet to exhaust) 1/4 780(98).8(43) 3/8 38(135) 3.8(59) 1/ 5490(194) 5.5(85) 3/4 6460(8) 6.5(0) 1 100(388) 11.0(170) Shuttle Valve 1/4 1350(45) 1.36(1) 4500 SRIS onstruction Materials Stainless Steel ISI 316L to N MR ody Stainless Steel ISI 316L to N MR Internals 316 Stainless Steel Spring Nitrile Seals 4500 SSORIS MOL OS, INSTLLTION IMNSIONS mm (inches) and WIGT kg (lbs) Quick xhaust Valves QVSN1 (1/4 ) 3QVSN1(3/8 ) 4QVSN1(1/ ) 6QVSN1 (3/4 ) 8QVSN1 (1 ) Shuttle Valves SVSN1 (1/4 ) 3 ports J yl Mounting hole øg 3 ports J yl Mounting hole øg 3 ports Outlet xh Inlet xh Inlet Inlet Inlet sq sq sq Model Number Ports G J Weight QVSN1 1/4 NPT (.05) (1.50) (1.6) (1.6) (0.63) (0.87) (0.75) 3QVSN/8 NPT (.36) (1.65) (1.38) (1.38) (0.69) (0.91) (1.06) 4QVSN1 1/ NPT (.76) (.17) (1.77) (1.77) (0.39) (0.6) (0.33) (0.88) (1.) (1.76) 6QVSN/4 NPT (4.0) (.76) (.13) (.13) (0.39) (0.47) (0.33) (1.06) (1.38) (3.53) 8QVSN1 1 NPT (4.49) (3.90) (.91) (.91) (0.63) (0.47) (0.43) (1.46) (.05) (7.94) Model Number Ports Weight SVSN1 1/4 NPT (.0) (1.69) (1.6) (0.88) IN ONTROL 11/05

62 4500 Thermal uses / Visual Indicator 1/8, 1/, NPT (SP) 4500 SRIS 4500 SSORIS TRML USS N VISUL INITOR General escriptions Thermal uses 316 Stainless Steel thermal fuses for fire release. vailable for 6 temperature settings. Visual Indicators ompact 316 Stainless Steel panel mounted visual indicator with various colour options. Operating Medium Gases iltered lubricated or non-lubricated air, inert gas, sweet (natural) gases. Sour gas option available. (details on application) Liquids Low pressure hydraulic, mineral oil or water. unctional Symbols Thermal fuse Visual indicator 1 Technical ata Working pressure (gases & liquids) Thermal uses 1 bar (174 psi) Visual Indicator 1 to 1 bar (14.5 to 174 psi) Working temperature Thermal uses -0º to + 70º (-4º to +158º) -0º to + 96º (-4º to +05º) -0º to +º (-4º to +16º) -0º to +14º (-4º to +55º) -0º to +137º (-4º to +79º) -0º to +00º (-4º to +39º) Visual Indicator 0º to +65º (36º to +149º) Maximum flow L/min (SM) -v(kv) 6 bar (87 psi), 1 bar (14.5 psi) differential Thermal uses 1/" 5800 (05) (90) onstruction Materials Stainless Steel ISI 316L to N MR-0175 ody Stainless steel ISI 316L to N MR-0175 Internals 316 Stainless Steel Springs Nitrile Seals Visual Indicator piston cetal Visual Indicator assembly cetal with acrylic lens MOL OS, INSTLLTION IMNSIONS mm (inches) and WIGT kg (lbs) Thermal uses Visual indicator 4TSN070 (70º) 4TSN096 (96º) 4TSN (º) 4TSN14 (14º) 4TSN137 (137º) 4TSN00 (00º) 1VISSN1G (1/8"NPT Red/Green) 1VISSN11G (1/8"SP Red/Green) a/f Maximum panel thickness IMPORTNT: use opening must be directed towards deck to safe guard personnel from shot accident by fire release. ø Port cross lats exagon Nut cross lats Panel ole ø lternative colours available in: R - GRN - MR - LK. Specify colour combination required. ø ngle of Visibility Vº Model Number Ports Weight 4TSN070 1/" NPT 51 (.00) 5.6 (1.01) 0.15 (0.33) 4TSN096 1/" NPT 51 (.00) 5.6 (1.01) 0.15 (0.33) 4TSN 1/" NPT 51 (.00) 5.6 (1.01) 0.15 (0.33) 4TSN14 1/" NPT 51 (.00) 5.6 (1.01) 0.15 (0.33) 4TSN137 1/" NPT 51 (.00) 5.6 (1.01) 0.15 (0.33) 4TSN00 1/" NPT 51 (.00) 5.6 (1.01) 0.15 (0.33) Model Number Ports Weight 1VISSN1G 1/8" NPT 0.1 (0.) 1VISSN11G 1/8" SP 0.1 (0.) T V (1.81) (0.5) (0.94) (1.00) (0.75) (1.0) (0.4) IN ONTROL 11/05

63 4500 N.R.V. reathers / reather(silencers) 1/8, 1/4, 3/8, 1/, 3/4, 1 NPT (SP) 4500 SRIS N.R.V. RTRS N RTR (SILNRS) General escriptions N.R.V. reathers 316 Stainless Steel non return breather to prevent ingress into exhaust and vent ports. reathers (Silencers) 316 Stainless Steel or rass sintered element silencers used to protect ports open to the atmosphere. 'ug Screen' Port Vent 316 Stainless Steel sintered element used to protect vent ports to atmosphere. Operating Medium Gases iltered lubricated or non-lubricated air, inert gas, sweet (natural) gases. Sour gas option available. (details on application) Technical ata Working pressure (gases & liquids) 1 bar (174 psi) Working temperature -0º to +70º (-4º to +158º) Maximum flow L/min (SM) - v(kv) at 6 bar (87 psi), 1 bar (14.5 psi) differential N.R.V. reathers 1/4" 646 (3) () 3/8" 1300 (45) (0) 1/" 1550 (54) (4) reathers (Silencers) 1/4" 1550 (55) (4) 3/8" 1940 (68) -.0 (30) 1/" 34 (13) (54) 3/4" 5500 (194) (85) 1"5700 (01) (88) 4500 SSORIS Liquids Low pressure hydraulic, mineral oil or water. unctional Symbols N.R.V. reather reather (Silencer) onstruction Materials Stainless steel ISI 316L to N MR-0175 Stainless steel ISI 316L to N MR-0175 Internals Stainless Steel Spring Nitrile Seals MOL OS, INSTLLTION IMNSIONS mm (inches) and WIGT kg (lbs) N.R.V. reathers NRSN(1/4") 3NRSN(3/8") 4NRSN(1/") reathers (Silencers) 1RSN (1/8") RSN (1/4") 3RSN (3/8") 4RSN (1/") 6RSN (3/4") 8RSN (1") a/f (across flats) ø Model Number Thread Weight NRSN 1/4" NPT (1.34) (0.67) (0.67) (0.06) 3NRSN 3/8" NPT (1.57) (0.9) (0.83) (0.130) 4NRSN 1/" NPT (1.77) (0.9) (0.83) (0.139) ug Screen Thread Weight 1VPSN1 1/8" NPT 0.01 (0.06) VPSN1 1/4" NPT 0.01 (0.06) Model Number Thread Weight 1RSN 1/8" NPT (1.) (0.55) (0.06) RSN 1/4" NPT (1.50) (0.67) (0.048) 3RSN 3/8" NPT (1.73) (0.87) (0.075) 4RSN 1/" NPT (.16) (0.94) (0.099) 6RSN 3/4" NPT (.76) (1.6) (0.) 8RSN 1" NPT (.95) (1.4) (0.33) IN ONTROL 11/05